W3C

HTML 5.2

W3C Recommendation,

3. Semantics, structure, and APIs of HTML documents

3.1. Documents

Every XML and HTML document in an HTML UA is represented by a Document object. [DOM41]

The Document object’s URL is defined in the DOM specification. It is initially set when the Document object is created, but that can change during the lifetime of the Document object; for example, it changes when the user navigates to a fragment on the page and when the pushState() method is called with a new URL. [DOM41]

Interactive user agents typically expose the Document object’s URL in their user interface. This is the primary mechanism by which a user can tell if a site is attempting to impersonate another.

When a Document is created by a script using the createDocument() or createHTMLDocument() APIs, the Document is both ready for post-load tasks and completely loaded immediately.

The document’s referrer is a string (representing a URL) that can be set when the Document is created. If it is not explicitly set, then its value is the empty string.

Each Document object has a reload override flag that is originally unset. The flag is set by the document.open() and document.write() methods in certain situations. When the flag is set, the Document also has a reload override buffer which is a Unicode string that is used as the source of the document when it is reloaded.

When the user agent is to perform an overridden reload, given a source browsing context, it must act as follows:

  1. Let source be the value of the browsing context's active document's reload override buffer.

  2. Let address be the browsing context's active document's URL.

  3. Let HTTPS state be the HTTPS state of the browsing context's active document.

  4. Let referrer policy be the referrer policy of the browsing context's active document.

  5. Let CSP list be the CSP list of the browsing context's active document.

  6. Navigate the browsing context to a new response whose body is source, header list is Referrer-Policy/referrer policy, CSP list is CSP list and HTTPS state is HTTPS state, with the exceptions enabled flag set and replacement enabled. The source browsing context is that given to the overridden reload algorithm. When the navigate algorithm creates a Document object for this purpose, set that Document's reload override flag and set its reload override buffer to source. Rethrow any exceptions.

    When it comes time to set the document’s address in the navigation algorithm, use address as the override URL.

3.1.1. The Document object

The DOM specification defines a Document interface, which this specification extends significantly:

enum DocumentReadyState { "loading", "interactive", "complete" };

typedef (HTMLScriptElement or SVGScriptElement) HTMLOrSVGScriptElement;

[OverrideBuiltins]
partial interface Document {
  // resource metadata management
  [PutForwards=href, Unforgeable] readonly attribute Location? location;
  attribute USVString domain;
  readonly attribute USVString referrer;
  attribute USVString cookie;
  readonly attribute DOMString lastModified;
  readonly attribute DocumentReadyState readyState;

  // DOM tree accessors
  getter object (DOMString name);
  [CEReactions] attribute DOMString title;
  attribute DOMString dir;
  attribute HTMLElement? body;
  readonly attribute HTMLHeadElement? head;
  [SameObject] readonly attribute HTMLCollection images;
  [SameObject] readonly attribute HTMLCollection embeds;
  [SameObject] readonly attribute HTMLCollection plugins;
  [SameObject] readonly attribute HTMLCollection links;
  [SameObject] readonly attribute HTMLCollection forms;
  [SameObject] readonly attribute HTMLCollection scripts;
  NodeList getElementsByName(DOMString elementName);
  readonly attribute HTMLOrSVGScriptElement? currentScript; // classic scripts in a document tree only

  // dynamic markup insertion
  Document open(optional DOMString type = "text/html", optional DOMString replace = "");
  WindowProxy open(DOMString url, DOMString name, DOMString features, optional boolean replace = false);
  [CEReactions] void close();
  [CEReactions] void write(DOMString... text);
  [CEReactions] void writeln(DOMString... text);

  // user interaction
  readonly attribute WindowProxy? defaultView;
  readonly attribute Element? activeElement;
  boolean hasFocus();
  [CEReactions] attribute DOMString designMode;
  [CEReactions] boolean execCommand(DOMString commandId, optional boolean showUI = false, optional DOMString value = "");
  boolean queryCommandEnabled(DOMString commandId);
  boolean queryCommandIndeterm(DOMString commandId);
  boolean queryCommandState(DOMString commandId);
  boolean queryCommandSupported(DOMString commandId);
  DOMString queryCommandValue(DOMString commandId);

  // special event handler IDL attributes that only apply to Document objects
  [LenientThis] attribute EventHandler onreadystatechange;
};
Document implements GlobalEventHandlers;
Document implements DocumentAndElementEventHandlers;

The Document has an HTTPS state (an HTTPS state value), initially "none", which represents the security properties of the network channel used to deliver the Document's data.

The Document has a referrer policy (a referrer policy), initially the empty string, which represents the default referrer policy used by fetches initiated by the Document.

The Document has a CSP list, which is a list of Content Security Policy objects active in this context. The list is empty unless otherwise specified.

The Document has a module map, which is a module map, initially empty.

3.1.2. Resource metadata management

document . referrer

Returns the URL of the Document from which the user navigated to this one, unless it was blocked or there was no such document, in which case it returns the empty string.

The noreferrer link type can be used to block the referrer.

The referrer attribute must return the document’s referrer.


document . cookie [ = value ]

Returns the HTTP cookies that apply to the Document. If there are no cookies or cookies can’t be applied to this resource, the empty string will be returned.

Can be set, to add a new cookie to the element’s set of HTTP cookies.

If the contents are sandboxed into a unique origin (e.g., in an iframe with the sandbox attribute), a "SecurityError" DOMException will be thrown on getting and setting.

The cookie attribute represents the cookies of the resource identified by the document’s URL.

A Document object that falls into one of the following conditions is a cookie-averse Document object:

On getting, if the document is a cookie-averse Document object, then the user agent must return the empty string. Otherwise, if the Document's origin is an opaque origin, the user agent must throw a "SecurityError" DOMException. Otherwise, the user agent must return the cookie-string for the document’s URL for a "non-HTTP" API, decoded using UTF-8 decode without BOM. [COOKIES] (This is a fingerprinting vector.)

On setting, if the document is a cookie-averse Document object, then the user agent must do nothing. Otherwise, if the Document's origin is an opaque origin, the user agent must throw a "SecurityError" DOMException. Otherwise, the user agent must act as it would when receiving a set-cookie-string for the document’s URL via a "non-HTTP" API, consisting of the new value encoded as UTF-8. [COOKIES] [ENCODING]

Since the cookie attribute is accessible across frames, the path restrictions on cookies are only a tool to help manage which cookies are sent to which parts of the site, and are not in any way a security feature.

The cookie attribute’s getter and setter synchronously access shared state. Since there is no locking mechanism, other browsing contexts in a multiprocess user agent can modify cookies while scripts are running. A site could, for instance, try to read a cookie, increment its value, then write it back out, using the new value of the cookie as a unique identifier for the session; if the site does this twice in two different browser windows at the same time, it might end up using the same "unique" identifier for both sessions, with potentially disastrous effects.


document . lastModified

Returns the date of the last modification to the document, as reported by the server, in the form "MM/DD/YYYY hh:mm:ss", in the user’s local time zone.

If the last modification date is not known, the current time is returned instead.

The lastModified attribute, on getting, must return the date and time of the Document's source file’s last modification, in the user’s local time zone, in the following format:

  1. The month component of the date.

  2. A U+002F SOLIDUS character (/).

  3. The day component of the date.

  4. A U+002F SOLIDUS character (/).

  5. The year component of the date.

  6. A U+0020 SPACE character.

  7. The hours component of the time.

  8. A U+003A COLON character (:).

  9. The minutes component of the time.

  10. A U+003A COLON character (:).

  11. The seconds component of the time.

All the numeric components above, other than the year, must be given as two ASCII digits representing the number in base ten, zero-padded if necessary. The year must be given as the shortest possible string of four or more ASCII digits representing the number in base ten, zero-padded if necessary.

The Document's source file’s last modification date and time must be derived from relevant features of the networking protocols used, e.g., from the value of the HTTP Last-Modified header of the document, or from metadata in the file system for local files. If the last modification date and time are not known, the attribute must return the current date and time in the above format.


document . readyState

Returns "loading" while the Document is loading, "interactive" once it is finished parsing but still loading sub-resources, and "complete" once it has loaded.

The readystatechange event fires on the Document object when this value changes.

Each document has a current document readiness. When a Document object is created, it must have its current document readiness set to the string "loading" if the document is associated with an HTML parser, an XML parser, or an XSLT processor, and to the string "complete" otherwise. Various algorithms during page loading affect this value. When the value is set, the user agent must fire an event named readystatechange at the Document object.

A Document is said to have an active parser if it is associated with an HTML parser or an XML parser that has not yet been stopped or aborted.

The readyState IDL attribute must, on getting, return the current document readiness.

3.1.3. DOM tree accessors

The html element of a document is its document element, if it’s an html element, and null otherwise.


document . head

Returns the head element.

The head element of a document is the first head element that is a child of the html element, if there is one, or null otherwise.

The head attribute, on getting, must return the head element of the document (a head element or null).


document . title [ = value ]

Returns the document’s title, as given by the title element for HTML and as given by the SVG title element for SVG.

Can be set, to update the document’s title. If there is no appropriate element to update, the new value is ignored.

The title element of a document is the first title element in the document (in tree order), if there is one, or null otherwise.

The title attribute must, on getting, run the following algorithm:

  1. If the document element is an SVG svg element, then let value be the child text content of the first SVG title element that is a child of the document element. [SVG11]

  2. Otherwise, let value be the child text content of the title element, or the empty string if the title element is null.

  3. Strip and collapse white space in value.

  4. Return value.

On setting, the steps corresponding to the first matching condition in the following list must be run:

If the document element is an SVG svg element
  1. If there is an SVG title element that is a child of the document element, let element be the first such element.

  2. Otherwise:

    1. Let element be the result of creating an element given the document element's node document, SVG title, and the SVG namespace.

    2. Insert element as the first child of the document element.

  3. Act as if the textContent IDL attribute of element was set to the new value being assigned.

If the document element is in the HTML namespace
  1. If the title element is null and the head element is null, then abort these steps.

  2. If the title element is non-null, let element be the title element.

  3. Otherwise:

    1. Let element be the result of creating an element given the document element's node document, title, and the HTML namespace.

    2. Append element to the head element.

  4. Act as if the textContent IDL attribute of element was set to the new value being assigned.

Otherwise

Do nothing.


document . body [ = value ]

Returns the body element.

Can be set, to replace the body element.

If the new value is not a body or frameset element, this will throw a "HierarchyRequestError" DOMException.

The body element of a document is the first child of the html element that is either a body element or a frameset element. If there is no such element, it is null.

The body attribute, on getting, must return the body element of the document (either a body element, a frameset element, or null). On setting, the following algorithm must be run:

  1. If the new value is not a body or frameset element, then throw a "HierarchyRequestError" DOMException and abort these steps.

  2. Otherwise, if the new value is the same as the body element, do nothing. Abort these steps.

  3. Otherwise, if the body element is not null, then replace the body element with the new value within the body element’s parent and abort these steps.

  4. Otherwise, if there is no document element, throw a "HierarchyRequestError" DOMException and abort these steps.

  5. Otherwise, the body element is null, but there’s a document element. Append the new value to the document element.


document . images

Returns an HTMLCollection of the img elements in the Document.

document . embeds
document . plugins

Return an HTMLCollection of the embed elements in the Document.

document . links

Returns an HTMLCollection of the a and area elements in the Document that have href attributes.

document . forms

Return an HTMLCollection of the form elements in the Document.

document . scripts

Return an HTMLCollection of the script elements in the Document.

The images attribute must return an HTMLCollection rooted at the Document node, whose filter matches only img elements.

The embeds attribute must return an HTMLCollection rooted at the Document node, whose filter matches only embed elements.

The plugins attribute must return the same object as that returned by the embeds attribute.

The links attribute must return an HTMLCollection rooted at the Document node, whose filter matches only a elements with href attributes and area elements with href attributes.

The forms attribute must return an HTMLCollection rooted at the Document node, whose filter matches only form elements.

The scripts attribute must return an HTMLCollection rooted at the Document node, whose filter matches only script elements.


collection = document . getElementsByName(name)

Returns a NodeList of elements in the Document that have a name attribute with the value name.

The getElementsByName(name) method takes a string name, and must return a live NodeList containing all the HTML elements in that document that have a name attribute whose value is equal to the name argument (in a case-sensitive manner), in tree order. When the method is invoked on a Document object again with the same argument, the user agent may return the same as the object returned by the earlier call. In other cases, a new NodeList object must be returned.


document . currentScript

Returns the script element, or the SVG script element, that is currently executing, as long as the element represents a classic script. In the case of reentrant script execution, returns the one that most recently started executing amongst those that have not yet finished executing.

Returns null if the Document is not currently executing a script element or SVG script element (e.g., because the running script is an event handler, or a timeout), or if the currently executing script or SVG script element represents a module script.

The currentScript attribute, on getting, must return the value to which it was most recently initialized. When the Document is created, the currentScript must be initialized to null.

This API has fallen out of favor in the implementor and standards community, as it globally exposes script or SVG script elements. As such, it is not available in newer contexts, such as when running module scripts or when running scripts in a shadow tree.


The Document interface supports named properties. The supported property names of a Document object document at any moment consist of the following, in tree order according to the element that contributed them, ignoring later duplicates, and with values from id attributes coming before values from name attributes when the same element contributes both:

To determine the value of a named property name for a Document, the user agent must return the value obtained using the following steps:

  1. Let elements be the list of named elements with the name name that are in a document tree with the Document as their root.

    There will be at least one such element, by definition.

  2. If elements has only one element, and that element is an iframe element, and that iframe element’s nested browsing context is not null, then return the WindowProxy object of the element’s nested browsing context.

  3. Otherwise, if elements has only one element, return that element.

  4. Otherwise return an HTMLCollection rooted at the Document node, whose filter matches only named elements with the name name.

Named elements with the name name, for the purposes of the above algorithm, are those that are either:

An embed or object element is said to be exposed if it has no exposed object ancestor, and, for object elements, is additionally either not showing its fallback content or has no object or embed descendants.


The dir attribute on the Document interface is defined along with the dir content attribute.

3.2. Elements

3.2.1. Semantics

Elements, attributes, and attribute values in HTML are defined (by this specification) to have certain meanings (semantics). For example, the ol element represents an ordered list, and the lang attribute represents the language of the content.

These definitions allow HTML processors, like web browsers and search engines, to present documents and applications consistently in different contexts.

In this example the HTML headings may be presented as large text in a desktop browser, or standard size text in bold in a mobile browser. In both cases the semantic information remains the same - that the h1 and h2 elements represent headings.
<!doctype html>
<html lang="en">
  <head>
    <title>Favorite books</title>
  </head>
  <body>
    <header>
      <img src="logo.png" alt="Favorite books logo">
    </header>
    <main>
      <h1>Favorite books</h1>
      <p>These are a few of my favorite books.</p>
      <h2>The Belgariad</h2>
      <p>Five books by David and Leigh Eddings.</p>
      <h2>The Hitchhiker’s Guide to the Galaxy</h2>
      <p>A trilogy of five books by Douglas Adams.</p>
    </main>
  </body>
</html>

This semantic information is critical to assistive technologies. For example, a screen reader will query the browser for semantic information and use that information to present the document or application in synthetic speech.

In some cases assistive technologies use semantic information to provide additional functionality. A speech recognition tool might provide a voice command for moving focus to the start of the main element for example.

When the appropriate HTML element or attribute is not used, it deprives HTML processors of valuable semantic information.

In this example styling may be used to create a visual representation of headings and other components, but because the appropriate HTML elements have not been used there is little semantic information available to web browsers, search engines and assistive technologies.
<!doctype html>
<html lang="en">
  <head>
    <title>Favorite books</title>
  </head>
  <body>
    <div class="header">
       <img src="logo.png" alt="Favorite books logo">
    </div>
    <div class="main">
       <span class="largeHeading">Favorite books</span>
       <p>These are a few of my favorite books.</p>
       <span class="smallHeading">The Belgariad</span>
       <p>Five books by David and Leigh Eddings.</p>
       <span class="smallHeading">The Hitchhiker’s Guide to the Galaxy</span>
       <p>A trilogy of five books by Douglas Adams.</p>
    </div>
  </body>
</html>

A document can change dynamically while it is being processed. Scripting and other mechanisms can be used to change attribute values, text, or the entire document structure. The semantics of a document are therefore based on the document’s state at a particular instance in time, but may also change in response to external events. User agents must update their presentation of the document to reflect these changes.

DOM nodes whose node document does not have a browsing context are exempt from all document conformance requirements other than the HTML syntax requirements and the XML syntax requirements.

In this example the audio element is used to play a music track. The controls attribute is used to show the user agent player, and as the music plays the controls are updated to indicate progress. The available semantic information is updated in response to these changes.
<audio src="comfortablynumb.mp3" controls>

3.2.2. Elements in the DOM

The nodes representing HTML elements in the DOM must implement, and expose to scripts, the interfaces listed for them in the relevant sections of this specification. This includes HTML elements in XML documents, even when those documents are in another context (e.g., inside an XSLT transform).

Elements in the DOM represent things; that is, they have intrinsic meaning, also known as semantics.

For example, an ol element represents an ordered list.

The basic interface, from which all the HTML elements' interfaces inherit, and which must be used by elements that have no additional requirements, is the HTMLElement interface.

[HTMLConstructor]
interface HTMLElement : Element {
  // metadata attributes
  [CEReactions] attribute DOMString title;
  [CEReactions] attribute DOMString lang;
  [CEReactions] attribute boolean translate;
  [CEReactions] attribute DOMString dir;
  [SameObject] readonly attribute DOMStringMap dataset;

  // user interaction
  [CEReactions] attribute boolean hidden;
  void click();
  [CEReactions] attribute long tabIndex;
  void focus();
  void blur();
  [CEReactions] attribute DOMString accessKey;
  [CEReactions] attribute boolean draggable;
  [CEReactions] attribute boolean spellcheck;
  void forceSpellCheck();
  [CEReactions, TreatNullAs=EmptyString] attribute DOMString innerText;
};
HTMLElement implements GlobalEventHandlers;
HTMLElement implements DocumentAndElementEventHandlers;
HTMLElement implements ElementContentEditable;

// Note: intentionally not [HTMLConstructor]
interface HTMLUnknownElement : HTMLElement { };

The HTMLElement interface holds methods and attributes related to a number of disparate features, and the members of this interface are therefore described in various different sections of this specification.

The HTMLUnknownElement interface must be used for HTML elements that are not defined by this specification (or other applicable specifications).

The element interface for an element with name name in the HTML namespace is determined as follows:

  1. If name is bgsound, blink, isindex, multicol, nextid, or spacer, then return HTMLUnknownElement.

  2. If name is acronym, basefont, big, center, nobr, noembed, noframes, plaintext, rb, rtc, strike, or tt, then return HTMLElement.

  3. If name is listing or xmp, then return HTMLPreElement.

  4. Otherwise, if this specification defines an interface appropriate for the element type corresponding to the local name name, then return that interface.

  5. If other applicable specifications define an appropriate interface for name, then return the interface they define.

  6. If name is a valid custom element name, then return HTMLElement.

  7. Return HTMLUnknownElement.

The use of HTMLElement instead of HTMLUnknownElement in the case of valid custom element names is done to ensure that any potential future upgrades only cause a linear transition of the element’s prototype chain, from HTMLElement to a subclass, instead of a lateral one, from HTMLUnknownElement to an unrelated subclass.

3.2.3. Element definitions

Each element in this specification has a definition that includes the following information:

Categories

A list of categories to which the element belongs. These are used when defining the content models for each element.

Contexts in which this element can be used

A non-normative description of where the element can be used. This information is redundant with the content models of elements that allow this one as a child, and is provided only as a convenience.

For simplicity, only the most specific expectations are listed. For example, an element that is both flow content and phrasing content can be used anywhere that either flow content or phrasing content is expected, but since anywhere that flow content is expected, phrasing content is also expected (since all phrasing content is flow content), only "where phrasing content is expected" will be listed.

Content model

A normative description of what content must be included as children and descendants of the element.

Tag omission in text/html

A non-normative description of whether, in the text/html syntax, the start and end tags can be omitted. This information is redundant with the normative requirements given in the optional tags section, and is provided in the element definitions only as a convenience.

Content attributes

A normative list of attributes that may be specified on the element (except where otherwise disallowed), along with non-normative descriptions of those attributes. (The content to the left of the dash is normative, the content to the right of the dash is not.)

Allowed ARIA role attribute values

A non normative list of ARIA role attribute values that may be specified on the element (except where otherwise disallowed). Each value is linked to a non normative description.

Allowed ARIA state and property attributes

Links to the Global aria-* attributes list and the allowed roles, states and properties table as described in the state and property attributes section.

DOM interface

A normative definition of a DOM interface that such elements must implement.

This is then followed by a description of what the element represents, along with any additional normative conformance criteria that may apply to authors and implementations. Examples are sometimes also included.

3.2.3.1. Attributes

An attribute value is a string. Except where otherwise specified, attribute values on HTML elements may be any string value, including the empty string, and there is no restriction on what text can be specified in such attribute values.

3.2.4. Content models

Each element defined in this specification has a content model: a description of the element’s expected contents. An HTML element must have contents that match the requirements described in the element’s content model. The contents of an element are its children in the DOM.

When a template element is being parsed, its children are assigned to the template contents (a separate DocumentFragment assigned to the element when the element is created), rather than its children.

The space characters are always allowed between elements. User agents represent these characters between elements in the source markup as Text nodes in the DOM. Empty Text nodes and Text nodes consisting of just sequences of those characters are considered inter-element white space.

Inter-element white space, comment nodes, and processing instruction nodes must be ignored when establishing whether an element’s contents match the element’s content model or not, and must be ignored when following algorithms that define document and element semantics.

Thus, an element A is said to be preceded or followed by a second element B if A and B have the same parent node and there are no other element nodes or Text nodes (other than inter-element white space) between them. Similarly, a node is the only child of an element if that element contains no other nodes other than inter-element white space, comment nodes, and processing instruction nodes.

Authors must not use HTML elements anywhere except where they are explicitly allowed, as defined for each element, or as explicitly required by other specifications. For XML compound documents, these contexts could be inside elements from other namespaces, if those elements are defined as providing the relevant contexts.

For example, the Atom specification defines a content element. When its type attribute has the value xhtml, the Atom specification requires that it contain a single HTML div element. Thus, a div element is allowed in that context, even though this is not explicitly normatively stated by this specification. [RFC4287]

In addition, HTML elements may be orphan nodes (i.e., without a parent node).

For example, creating a td element and storing it in a global variable in a script is conforming, even though td elements are otherwise only supposed to be used inside tr elements.
var data = {
  name: "Banana",
  cell: document.createElement('td'),
};
3.2.4.1. The "nothing" content model

When an element’s content model is nothing, the element must contain no Text nodes (other than inter-element white space) and no element nodes.

Most HTML elements whose content model is "nothing" are also, for convenience, void elements (elements that have no end tag in the HTML syntax). However, these are entirely separate concepts.

3.2.4.2. Kinds of content

Each element in HTML falls into zero or more categories that group elements with similar characteristics together. The following broad categories are used in this specification:

Some elements also fall into other categories, which are defined in other parts of this specification.

These categories are related as follows:

Sectioning content, heading content, phrasing content, embedded content, and interactive content are all types of flow content. Metadata is sometimes flow content. Metadata and interactive content are sometimes phrasing content. Embedded content is also a type of phrasing content, and sometimes is interactive content.

Other categories are also used for specific purposes, e.g., form controls are specified using a number of categories to define common requirements. Some elements have unique requirements and do not fit into any particular category.

3.2.4.2.1. Metadata content

Metadata content is content that sets up the presentation or behavior of the rest of the content, or that sets up the relationship of the document with other documents, or that conveys other "out of band" information.

Elements from other namespaces whose semantics are primarily metadata-related (e.g., RDF) are also metadata content.

Thus, in the XML serialization, one can use RDF, like this:
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:r="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
  <head>
    <title>Hedral’s Home Page</title>
    <r:RDF>
      <Person xmlns="http://www.w3.org/2000/10/swap/pim/contact#"
                 r:about="https://hedral.example.com/#">
        <fullName>Cat Hedral</fullName>
        <mailbox r:resource="mailto:hedral@damowmow.com"/>
        <personalTitle>Sir</personalTitle>
      </Person>
    </r:RDF>
  </head>
  <body>
    <h1>My home page</h1>
    <p>I like playing with string, I guess. Sister says squirrels are fun
    too so sometimes I follow her to play with them.</p>
  </body>
</html>

This isn’t possible in the HTML serialization, however.

3.2.4.2.2. Flow content

Most elements that are used in the body of documents and applications are categorized as flow content.

3.2.4.2.3. Sectioning content

Sectioning content is content that defines the scope of headings and footers.

Each sectioning content element potentially has a heading and an outline. See the section on headings and sections for further details.

There are also certain elements that are sectioning roots. These are distinct from sectioning content, but they can also have an outline.

3.2.4.2.4. Heading content

Heading content defines the header of a section (whether explicitly marked up using sectioning content elements, or implied by the heading content itself).

3.2.4.2.5. Phrasing content

Phrasing content is the text of the document, as well as elements that mark up that text at the intra-paragraph level. Runs of phrasing content form paragraphs.

Most elements that are categorized as phrasing content can only contain elements that are themselves categorized as phrasing content, not any flow content.

Text, in the context of content models, means either nothing, or Text nodes. Text is sometimes used as a content model on its own, but is also phrasing content, and can be inter-element white space (if the Text nodes are empty or contain just space characters).

Text nodes and attribute values must consist of Unicode characters, must not contain U+0000 characters, must not contain permanently undefined Unicode characters (noncharacters), and must not contain control characters other than space characters. This specification includes extra constraints on the exact value of Text nodes and attribute values depending on their precise context.

For elements in HTML, the constraints of the Text content model also depends on the kind of element. For instance, an "<" inside a textarea element does not need to be escaped in HTML because textarea is an escapable raw text element. (This does not apply to XHTML. In XHTML, the kind of element doesn’t affect the constraints of the Text content model.)

3.2.4.2.6. Embedded content

Embedded content is content that imports another resource into the document, or content from another vocabulary that is inserted into the document.

Elements that are from namespaces other than the HTML namespace and that convey content but not metadata, are embedded content for the purposes of the content models defined in this specification. (For example, MathML, or SVG.)

Some embedded content elements can have fallback content: content that is to be used when the external resource cannot be used (e.g., because it is of an unsupported format). The element definitions state what the fallback is, if any.

3.2.4.2.7. Interactive content

Interactive content is content that is specifically intended for user interaction.

The tabindex attribute can also make any element into interactive content.

3.2.4.2.8. Palpable content

As a general rule, elements whose content model allows any flow content or phrasing content should have at least one node in its contents that is palpable content and that does not have the hidden attribute specified.

Palpable content makes an element non-empty by providing either some descendant non-empty text, or else something users can hear (audio elements) or view (video or img or canvas elements) or otherwise interact with (for example, interactive form controls).

This requirement is not a hard requirement, however, as there are many cases where an element can be empty legitimately, for example when it is used as a placeholder which will later be filled in by a script, or when the element is part of a template and would on most pages be filled in but on some pages is not relevant.

Conformance checkers are encouraged to provide a mechanism for authors to find elements that fail to fulfill this requirement, as an authoring aid.

The following elements are palpable content:

3.2.4.2.9. Script-supporting elements

Script-supporting elements are those that do not represent anything themselves (i.e., they are not rendered), but are used to support scripts, e.g., to provide functionality for the user.

The following elements are script-supporting elements:

3.2.4.3. Transparent content models

Some elements are described as transparent; they have "transparent" in the description of their content model. The content model of a transparent element is derived from the content model of its parent element: the elements required in the part of the content model that is "transparent" are the same elements as required in the part of the content model of the parent of the transparent element in which the transparent element finds itself.

For instance, an ins element inside a ruby element cannot contain an rt element, because the part of the ruby element’s content model that allows ins elements is the part that allows phrasing content, and the rt element is not phrasing content.

In some cases, where transparent elements are nested in each other, the process has to be applied iteratively.

Consider the following markup fragment:
<p><object><param><ins><map><a href="/">Apples</a></map></ins></object></p>

To check whether "Apples" is allowed inside the a element, the content models are examined. The a element’s content model is transparent, as is the map element’s, as is the ins element’s, as is the part of the object element’s in which the ins element is found. The object element is found in the p element, whose content model is phrasing content. Thus, "Apples" is allowed, as text is phrasing content.

When a transparent element has no parent, then the part of its content model that is "transparent" must instead be treated as accepting any flow content.

3.2.4.4. Paragraphs

The term paragraph as defined in this section is used for more than just the definition of the p element. The paragraph concept defined here is used to describe how to interpret documents. The p element is merely one of several ways of marking up a paragraph.

A paragraph is typically a run of phrasing content that forms a block of text with one or more sentences that discuss a particular topic, as in typography, but can also be used for more general thematic grouping. For instance, an address is also a paragraph, as is a part of a form, a byline, or a stanza in a poem.

In the following example, there are two paragraphs in a section. There is also a heading, which contains phrasing content that is not a paragraph. Note how the comments and inter-element white space do not form paragraphs.
<section>
  <h2>Example of paragraphs</h2>
  This is the <em>first</em> paragraph in this example.
  <p>This is the second.</p>
  <!-- This is not a paragraph. -->
</section>

Paragraphs in flow content are defined relative to what the document looks like without the a, ins, del, and map elements complicating matters, since those elements, with their hybrid content models, can straddle paragraph boundaries, as shown in the first two examples below.

Generally, having elements straddle paragraph boundaries is best avoided. Maintaining such markup can be difficult.

The following example takes the markup from the earlier example and puts ins and del elements around some of the markup to show that the text was changed (though in this case, the changes admittedly don’t make much sense). Notice how this example has exactly the same paragraphs as the previous one, despite the ins and del elements — the ins element straddles the heading and the first paragraph, and the del element straddles the boundary between the two paragraphs.
<section>
  <ins><h1>Example of paragraphs</h1>
  This is the <em>first</em> paragraph in</ins> this example<del>.
  <p>This is the second.</p></del>
  <!-- This is not a paragraph. -->
</section>

Let view be a view of the DOM that replaces all a, ins, del, and map elements in the document with their contents. Then, in view, for each run of sibling phrasing content nodes uninterrupted by other types of content, in an element that accepts content other than phrasing content as well as phrasing content, let first be the first node of the run, and let last be the last node of the run. For each such run that consists of at least one node that is neither embedded content nor inter-element white space, a paragraph exists in the original DOM from immediately before first to immediately after last. (Paragraphs can thus span across a, ins, del, and map elements.)

Conformance checkers may warn authors of cases where they have paragraphs that overlap each other (this can happen with object, video, audio, and canvas elements, and indirectly through elements in other namespaces that allow HTML to be further embedded therein, like SVG svg or MathML math).

A paragraph is also formed explicitly by p elements.

The p element can be used to wrap individual paragraphs when there would otherwise not be any content other than phrasing content to separate the paragraphs from each other.

In the following example, the link spans half of the first paragraph, all of the heading separating the two paragraphs, and half of the second paragraph. It straddles the paragraphs and the heading.
<header>
  Welcome!
  <a href="about.html">
    This is home of...
    <h1>The Falcons!</h1>
    The Lockheed Martin multirole jet fighter aircraft!
  </a>
  This page discusses the F-16 Fighting Falcon’s innermost secrets.
</header>

Here is another way of marking this up, this time showing the paragraphs explicitly, and splitting the one link element into three:

<header>
  <p>Welcome! <a href="about.html">This is home of...</a></p>
  <h1><a href="about.html">The Falcons!</a></h1>
  <p><a href="about.html">The Lockheed Martin multirole jet
  fighter aircraft!</a> This page discusses the F-16 Fighting
  Falcon’s innermost secrets.</p>
</header>
It is possible for paragraphs to overlap when using certain elements that define fallback content. For example, in the following section:
<section>
  <h2>My Cats</h2>
  You can play with my cat simulator.
  <object data="cats.sim">
    To see the cat simulator, use one of the following links:
    <ul>
      <li><a href="cats.sim">Download simulator file</a>
      <li><a href="https://sims.example.com/watch?v=LYds5xY4INU">Use online simulator</a>
    </ul>
    Alternatively, upgrade to the Mellblom Browser.
  </object>
  I’m quite proud of it.
</section>

There are five paragraphs:

  1. The paragraph that says "You can play with my cat simulator. object I’m quite proud of it.", where object is the object element.

  2. The paragraph that says "To see the cat simulator, use one of the following links:".

  3. The paragraph that says "Download simulator file".

  4. The paragraph that says "Use online simulator".

  5. The paragraph that says "Alternatively, upgrade to the Mellblom Browser.".

The first paragraph is overlapped by the other four. A user agent that supports the "cats.sim" resource will only show the first one, but a user agent that shows the fallback will confusingly show the first sentence of the first paragraph as if it was in the same paragraph as the second one, and will show the last paragraph as if it was at the start of the second sentence of the first paragraph.

To avoid this confusion, explicit p elements can be used. For example:

<section>
  <h2>My Cats</h2>
  <p>You can play with my cat simulator.</p>
  <object data="cats.sim">
    <p>To see the cat simulator, use one of the following links:</p>
    <ul>
      <li><a href="cats.sim">Download simulator file</a>
      <li><a href="https://sims.example.com/watch?v=LYds5xY4INU">Use online simulator</a>
    </ul>
    <p>Alternatively, upgrade to the Mellblom Browser.</p>
  </object>
  <p>I’m quite proud of it.</p>
</section>

3.2.5. Global attributes

The following attributes are common to and may be specified on all HTML elements (even those not defined in this specification):

These attributes are only defined by this specification as attributes for HTML elements. When this specification refers to elements having these attributes, elements from namespaces that are not defined as having these attributes must not be considered as being elements with these attributes.

For example, in the following XML fragment, the "bogus" element does not have a dir attribute as defined in this specification, despite having an attribute with the literal name "dir". Thus, the directionality of the inner-most span element is 'rtl', inherited from the div element indirectly through the "bogus" element.
<div xmlns="http://www.w3.org/1999/xhtml" dir="rtl">
  <bogus xmlns="https://example.net/ns" dir="ltr">
    <span xmlns="http://www.w3.org/1999/xhtml">
    </span>
  </bogus>
</div>

The DOM specification defines additional user agent requirements for the class, id, and slot attributes for any element in any namespace. [DOM41]

The class, id, and slot attributes may be specified on all HTML elements.

When specified on HTML elements, the class attribute must have a value that is a set of space-separated tokens representing the various classes that the element belongs to.

Assigning classes to an element affects class matching in selectors in CSS, the getElementsByClassName() method in the DOM, and other such features.

There are no additional restrictions on the tokens authors can use in the class attribute, but authors are encouraged to use values that describe the nature of the content, rather than values that describe the desired presentation of the content.

When specified on HTML elements, the id attribute value must be unique amongst all the IDs in the element’s tree and must contain at least one character. The value must not contain any space characters.

The id attribute specifies its element’s unique identifier (ID).

There are no other restrictions on what form an ID can take; in particular, IDs can consist of just digits, start with a digit, start with an underscore, consist of just punctuation, etc.

An element’s unique identifier can be used for a variety of purposes, most notably as a way to link to specific parts of a document using fragment, as a way to target an element when scripting, and as a way to style a specific element from CSS.

Identifiers are opaque strings. Particular meanings should not be derived from the value of the id attribute.

There are no conformance requirements for the slot attribute specific to HTML elements.


To enable assistive technology products to expose a more fine-grained interface than is otherwise possible with HTML elements and attributes, a set of annotations for assistive technology products can be specified (the ARIA role and aria-* attributes). [wai-aria-1.1]


The following event handler content attributes may be specified on any HTML element:

The attributes marked with an asterisk have a different meaning when specified on body elements as those elements expose event handlers of the Window object with the same names.

While these attributes apply to all elements, they are not useful on all elements. For example, only media elements will ever receive a volumechange event fired by the user agent.


Custom data attributes (e.g., data-foldername or data-msgid) can be specified on any HTML element, to store custom data specific to the page.


In HTML documents, elements in the HTML namespace may have an xmlns attribute specified, if, and only if, it has the exact value "http://www.w3.org/1999/xhtml". This does not apply to XML documents.

In HTML, the xmlns attribute has absolutely no effect. It is basically a talisman. It is allowed merely to make migration to and from XML mildly easier. When parsed by an HTML parser, the attribute ends up in no namespace, not the "http://www.w3.org/2000/xmlns/" namespace like namespace declaration attributes in XML do.

In XML, an xmlns attribute is part of the namespace declaration mechanism, and an element cannot actually have an xmlns attribute in no namespace specified.


The XML specification also allows the use of the xml:space attribute in the XML namespace on any element in an XML document. This attribute has no effect on HTML elements, as the default behavior in HTML is to preserve white space. [XML]

There is no way to serialize the xml:space attribute on HTML elements in the text/html syntax.

3.2.5.1. The title attribute

The title attribute represents advisory information for the element, such as would be appropriate for a tooltip. On a link, this could be the title or a description of the target resource; on an image, it could be the image credit or a description of the image; on a paragraph, it could be a footnote or commentary on the text; on a citation, it could be further information about the source; on interactive content, it could be a label for, or instructions for, use of the element; and so forth. The value is text.

Relying on the title attribute is currently discouraged as many user agents do not expose the attribute in an accessible manner as required by this specification (e.g., requiring a pointing device such as a mouse to cause a tooltip to appear, which excludes keyboard-only users and touch-only users, such as anyone with a modern phone or tablet).

If this attribute is omitted from an element, then it implies that the title attribute of the nearest ancestor HTML element with a title attribute set is also relevant to this element. Setting the attribute overrides this, explicitly stating that the advisory information of any ancestors is not relevant to this element. Setting the attribute to the empty string indicates that the element has no advisory information.

If the title attribute’s value contains U+000A LINE FEED (LF) characters, the content is split into multiple lines. Each U+000A LINE FEED (LF) character represents a line break.

Caution is advised with respect to the use of newlines in title attributes.

For instance, the following snippet actually defines an abbreviation’s expansion with a line break in it:

<p>My logs show that there was some interest in <abbr title="Hypertext
Transport Protocol">HTTP</abbr> today.</p>

Some elements, such as link, abbr, and input, define additional semantics for the title attribute beyond the semantics described above.

The advisory information of an element is the value that the following algorithm returns, with the algorithm being aborted once a value is returned. When the algorithm returns the empty string, then there is no advisory information.

  1. If the element is a link, style, dfn, or abbr, then: if the element has a title attribute, return the value of that attribute, otherwise, return the empty string.

  2. Otherwise, if the element has a title attribute, then return its value.

  3. Otherwise, if the element has a parent element, then return the parent element’s advisory information.

  4. Otherwise, return the empty string.

User agents should inform the user when elements have advisory information, otherwise the information would not be discoverable.


The title IDL attribute must reflect the title content attribute.

3.2.5.2. The lang and xml:lang attributes

The lang attribute (in no namespace) specifies the primary language for the element’s contents and for any of the element’s attributes that contain text. Its value must be a valid BCP 47 language tag, or the empty string. Setting the attribute to the empty string indicates that the primary language is unknown. [BCP47]

The lang attribute in the XML namespace is defined in XML. [XML]

If these attributes are omitted from an element, then the language of this element is the same as the language of its parent element, if any.

The lang attribute in no namespace may be used on any HTML element.

The lang attribute in the XML namespace may be used on HTML elements in XML documents, as well as elements in other namespaces if the relevant specifications allow it (in particular, MathML and SVG allow lang attributes in the XML namespace to be specified on their elements). If both the lang attribute in no namespace and the lang attribute in the XML namespace are specified on the same element, they must have exactly the same value when compared in an ASCII case-insensitive manner.

Authors must not use the lang attribute in the XML namespace on HTML elements in HTML documents. To ease migration to and from XHTML, authors may specify an attribute in no namespace with no prefix and with the literal localname "xml:lang" on HTML elements in HTML documents, but such attributes must only be specified if a lang attribute in no namespace is also specified, and both attributes must have the same value when compared in an ASCII case-insensitive manner.

The attribute in no namespace with no prefix and with the literal localname "xml:lang" has no effect on language processing.

The language of HTML documents is indicated using a lang attribute (on the html element itself, to indicate the primary language of the document, and on individual elements, to indicate a change in language). It provides an explicit indication to user agents about the language of content in order to enable language specific behavior. For example, use of an appropriate language dictionary; selection of an appropriate font or glyphs for characters shared between different languages; or in the case of screen readers and similar assistive technologies with voice output, pronunciation of content using the correct voice / language library.

Incorrect or absent lang attributes can produce unexpected results in other circumstances, as they are also used to determine quotation marks for q elements, styling such as hyphenation, case conversion, line-breaking, and spell-checking in some editors, etc.

Setting the lang attribute to a language which does not match the language of the document or document parts will result in some users being unable to understand the content.


To determine the language of a node, user agents must look at the nearest ancestor element (including the element itself if the node is an element) that has a lang attribute in the XML namespace set or is an HTML element and has a lang in no namespace attribute set. That attribute specifies the language of the node (regardless of its value).

If both the lang attribute in no namespace and the lang attribute in the XML namespace are set on an element, user agents must use the lang attribute in the XML namespace, and the lang attribute in no namespace must be ignored for the purposes of determining the element’s language.

If node’s inclusive ancestors do not have either attribute set, but there is a pragma-set default language set, then that is the language of the node. If there is no pragma-set default language set, then language information from a higher-level protocol (such as HTTP), if any, must be used as the final fallback language instead. In the absence of any such language information, and in cases where the higher-level protocol reports multiple languages, the language of the node is unknown, and the corresponding language tag is the empty string.

For example, if a document is delivered over HTTP and the Content-Language HTTP header is specified with a value "en", then for any element in the document that does not itself have a lang attribute nor any ancestor of that element, the fallback language for the element will be English. If the value of the Content-Language header was "de, fr, it" then the language of the node is unknown. This article provides some additional guidance on the use of HTTP headers, and meta elements for providing language information.

If the resulting value is not a recognized language tag, then it must be treated as an unknown language having the given language tag, distinct from all other languages. For the purposes of round-tripping or communicating with other services that expect language tags, user agents should pass unknown language tags through unmodified, and tagged as being BCP 47 language tags, so that subsequent services do not interpret the data as another type of language description. [BCP47]

Thus, for instance, an element with lang="xyzzy" would be matched by the selector :lang(xyzzy) (e.g., in CSS), but it would not be matched by :lang(abcde), even though both are equally invalid. Similarly, if a Web browser and screen reader working in unison communicated about the language of the element, the browser would tell the screen reader that the language was "xyzzy", even if it knew it was invalid, just in case the screen reader actually supported a language with that tag after all. Even if the screen reader supported both BCP 47 and another syntax for encoding language names, and in that other syntax the string "xyzzy" was a way to denote the Belarusian language, it would be incorrect for the screen reader to then start treating text as Belarusian, because "xyzzy" is not how Belarusian is described in BCP 47 codes (BCP 47 uses the code "be" for Belarusian).

If the resulting value is the empty string, then it must be interpreted as meaning that the language of the node is explicitly unknown.


User agents may use the element’s language to determine proper processing or rendering (e.g., in the selection of appropriate fonts or pronunciations, for dictionary selection, or for the user interfaces of form controls such as date pickers).


The lang IDL attribute must reflect the lang content attribute in no namespace.

3.2.5.3. The translate attribute

The translate attribute is an enumerated attribute that is used to specify whether an element’s attribute values and the values of its Text node children are to be translated when the page is localized, or whether to leave them unchanged.

The attribute’s keywords are the empty string, yes, and no. The empty string and the yes keyword map to the yes state. The no keyword maps to the no state. In addition, there is a third state, the inherit state, which is the missing value default (and the invalid value default).

Each element (even non-HTML elements) has a translation mode, which is in either the translate-enabled state or the no-translate state. If an HTML element's translate attribute is in the yes state, then the element’s translation mode is in the translate-enabled state; otherwise, if the element’s translate attribute is in the no state, then the element’s translation mode is in the no-translate state. Otherwise, either the element’s translate attribute is in the inherit state, or the element is not an HTML element and thus does not have a translate attribute; in either case, the element’s translation mode is in the same state as its parent element’s, if any, or in the translate-enabled state, if the element is a document element.

When an element is in the translate-enabled state, the element’s translatable attributes and the values of its Text node children are to be translated when the page is localized.

When an element is in the no-translate state, the element’s attribute values and the values of its Text node children are to be left as-is when the page is localized, e.g., because the element contains a person’s name or a name of a computer program.

The following attributes are translatable attributes:

Other specifications may define other attributes that are also translatable attributes. For example, ARIA would define the aria-label attribute as translatable.


The translate IDL attribute must, on getting, return true if the element’s translation mode is translate-enabled, and false otherwise. On setting, it must set the content attribute’s value to "yes" if the new value is true, and set the content attribute’s value to "no" otherwise.

In this example, everything in the document is to be translated when the page is localized, except the sample keyboard input and sample program output:
<!DOCTYPE HTML>
<html> <!-- default on the document element is translate=yes -->
  <head>
    <title>The Bee Game</title> <!-- implied translate=yes inherited from ancestors -->
  </head>
  <body>
    <p>The Bee Game is a text adventure game in English.</p>
    <p>When the game launches, the first thing you should do is type
      <kbd translate=no>eat honey</kbd>. The game will respond with:</p>
  <pre><samp translate=no>Yum yum! That was some good honey!</samp></pre>
  </body>
</html>
3.2.5.4. The xml:base attribute (XML only)

The xml:base attribute is defined in XML Base. [XMLBASE]

The xml:base attribute may be used on HTML elements of XML documents. Authors must not use the xml:base attribute on HTML elements in HTML documents.

3.2.5.5. The dir attribute

The dir attribute specifies the element’s text directionality. The attribute is an enumerated attribute with the following keywords and states:

The ltr keyword, which maps to the ltr state

Indicates that the contents of the element are explicitly directionally isolated left-to-right text.

The rtl keyword, which maps to the rtl state

Indicates that the contents of the element are explicitly directionally isolated right-to-left text.

The auto keyword, which maps to the auto state

Indicates that the contents of the element are explicitly directionally isolated text, but that the direction is to be determined programmatically using the contents of the element (as described below).

The heuristic used by this state is very crude (it just looks at the first character with a strong directionality, in a manner analogous to the Paragraph Level determination in the bidirectional algorithm). Authors are urged to only use this value as a last resort when the direction of the text is truly unknown and no better server-side heuristic can be applied. [BIDI]

For textarea and pre elements, the heuristic is applied on a per-paragraph level.

The attribute has no invalid value default and no missing value default.


The directionality of an element (any element, not just an HTML element) is either 'ltr' or 'rtl', and is determined as per the first appropriate set of steps from the following list:

If the element’s dir attribute is in the ltr state
If the element is a document element and the dir attribute is not in a defined state (i.e., it is not present or has an invalid value)
If the element is an input element whose type attribute is in the Telephone state, and the dir attribute is not in a defined state (i.e., it is not present or has an invalid value)

The directionality of the element is 'ltr'.

If the element’s dir attribute is in the rtl state

The directionality of the element is 'rtl'.

If the element is an input element whose type attribute is in the Text, Search, Telephone, URL, or E-mail state, and the dir attribute is in the auto state
If the element is a textarea element and the dir attribute is in the auto state

If the element’s value contains a character of bidirectional character type AL or R, and there is no character of bidirectional character type L anywhere before it in the element’s value, then the directionality of the element is 'rtl'. [BIDI]

Otherwise, if the element’s value is not the empty string, or if the element is a document element, the directionality of the element is 'ltr'.

Otherwise, the directionality of the element is the same as the element’s parent element’s directionality.

If the element’s dir attribute is in the auto state
If the element is a bdi element and the dir attribute is not in a defined state (i.e., it is not present or has an invalid value)

Find the first character in tree order that matches the following criteria:

  • The character is from a Text node that is a descendant of the element whose directionality is being determined.

  • The character is of bidirectional character type L, AL, or R. [BIDI]

  • The character is not in a Text node that has an ancestor element that is a descendant of the element whose directionality is being determined and that is either:

If such a character is found and it is of bidirectional character type AL or R, the directionality of the element is 'rtl'.

If such a character is found and it is of bidirectional character type L, the directionality of the element is 'ltr'.

Otherwise, if the element is a document element, the directionality of the element is 'ltr'.

Otherwise, the directionality of the element the same as the element’s parent element’s directionality.

If the element has a parent element and the dir attribute is not in a defined state (i.e., it is not present or has an invalid value)

The directionality of the element is the same as the element’s parent element’s directionality.

Since the dir attribute is only defined for HTML elements, it cannot be present on elements from other namespaces. Thus, elements from other namespaces always just inherit their directionality from their parent element, or, if they don’t have one, default to 'ltr'.

This attribute has rendering requirements involving the bidirectional algorithm.


The directionality of an attribute of an HTML element, which is used when the text of that attribute is to be included in the rendering in some manner, is determined as per the first appropriate set of steps from the following list:

If the attribute is a directionality-capable attribute and the element’s dir attribute is in the auto state

Find the first character (in logical order) of the attribute’s value that is of bidirectional character type L, AL, or R. [BIDI]

If such a character is found and it is of bidirectional character type AL or R, the directionality of the attribute is 'rtl'.

Otherwise, the directionality of the attribute is 'ltr'.

Otherwise

The directionality of the attribute is the same as the element’s directionality.

The following attributes are directionality-capable attributes:


document . dir [ = value ]

Returns the html element’s dir attribute’s value, if any.

Can be set, to either 'ltr', 'rtl', or 'auto' to replace the html element’s dir attribute’s value.

If there is no html element, returns the empty string and ignores new values.

The dir IDL attribute on an element must reflect the dir content attribute of that element, limited to only known values.

The dir IDL attribute on Document objects must reflect the dir content attribute of the html element, if any, limited to only known values. If there is no such element, then the attribute must return the empty string and do nothing on setting.

Authors are strongly encouraged to use the dir attribute to indicate text direction rather than using CSS, since that way their documents will continue to render correctly even in the absence of CSS (e.g., as interpreted by search engines).

This markup fragment is of an IM conversation.
<p dir=auto class="u1"><b><bdi>Student</bdi>:</b> How do you write "What’s your name?" in Arabic?</p>
<p dir=auto class="u2"><b><bdi>Teacher</bdi>:</b> ما اسمك؟</p>
<p dir=auto class="u1"><b><bdi>Student</bdi>:</b> Thanks.</p>
<p dir=auto class="u2"><b><bdi>Teacher</bdi>:</b> That’s written "شكرًا".</p>
<p dir=auto class="u2"><b><bdi>Teacher</bdi>:</b> Do you know how to write "Please"?</p>
<p dir=auto class="u1"><b><bdi>Student</bdi>:</b> "من فضلك", right?</p>

Given a suitable style sheet and the default alignment styles for the p element, namely to align the text to the start edge of the paragraph, the resulting rendering could be as follows:

Each paragraph rendered as a separate block, with the paragraphs left-aligned except the second paragraph and the last one, which would  be right aligned, with the usernames ('Student' and 'Teacher' in this example) flush right, with a colon to their left, and the text first to the left of that.

As noted earlier, the 'auto' value is not a panacea. The final paragraph in this example is misinterpreted as being right-to-left text, since it begins with an Arabic character, which causes the "right?" to be to the left of the Arabic text.

3.2.5.6. The style attribute

All HTML elements may have the style content attribute set. This is a style attribute as defined by the CSS Style Attributes specification. [CSS-STYLE-ATTR]

In user agents that support CSS, the attribute’s value must be parsed when the attribute is added or has its value changed, according to the rules given for style attributes. [CSS-STYLE-ATTR]

However, if the Should element’s inline behavior be blocked by Content Security Policy? algorithm returns "Blocked" when executed upon the attribute’s element and "style attribute", and the attribute’s value, then the style rules defined in the attribute’s value must not be applied to the element. [CSP3]

Documents that use style attributes on any of their elements must still be comprehensible and usable if those attributes were removed.

In particular, using the style attribute to hide and show content, or to convey meaning that is otherwise not included in the document, is non-conforming. (To hide and show content, use the hidden attribute.)


element . style

Returns a CSSStyleDeclaration object for the element’s style attribute.

The style IDL attribute is defined in the CSS Object Model (CSSOM) specification. [CSSOM]

In the following example, the words that refer to colors are marked up using the span element and the style attribute to make those words show up in the relevant colors in visual media.
<p>My sweat suit is <span style="color: green; background:
transparent">green</span> and my eyes are <span style="color: blue;
background: transparent">blue</span>.</p>
3.2.5.7. Embedding custom non-visible data with the data-* attributes

A custom data attribute is an attribute in no namespace whose name starts with the string "data-", has at least one character after the hyphen, is XML-compatible, and contains no uppercase ASCII letters.

All attribute names on HTML elements in HTML documents get ASCII-lowercased automatically, so the restriction on ASCII uppercase letters doesn’t affect such documents.

Custom data attributes are intended to store custom data private to the page or application, for which there are no more appropriate attributes or elements.

These attributes are not intended for use by software that is not known to the administrators of the site that uses the attributes. For generic extensions that are to be used by multiple independent tools, either this specification should be extended to provide the feature explicitly, or a technology like microdata should be used (with a standardized vocabulary).

For instance, a site about music could annotate list items representing tracks in an album with custom data attributes containing the length of each track. This information could then be used by the site itself to allow the user to sort the list by track length, or to filter the list for tracks of certain lengths.
<ol>
  <li data-length="2m11s">Beyond The Sea</li>
  ...
</ol>

It would be inappropriate, however, for the user to use generic software not associated with that music site to search for tracks of a certain length by looking at this data.

This is because these attributes are intended for use by the site’s own scripts, and are not a generic extension mechanism for publicly-usable metadata.

Similarly, a page author could write markup that provides information for a translation tool that they are intending to use:
<p>The third <span data-mytrans-de="Anspruch">claim</span> covers the case of
<span translate="no">HTML</span> markup.</p>

In this example, the "data-mytrans-de" attribute gives specific text for the MyTrans product to use when translating the phrase "claim" to German. However, the standard translate attribute is used to tell it that in all languages, "HTML" is to remain unchanged. When a standard attribute is available, there is no need for a custom data attribute to be used.

Every HTML element may have any number of custom data attributes specified, with any value.

Authors should carefully design such extensions so that when the attributes are ignored and any associated CSS dropped, the page is still usable.

User agents must not derive any implementation behavior from these attributes or values. Specifications intended for user agents must not define these attributes to have any meaningful values.

JavaScript libraries may use the custom data attributes, as they are considered to be part of the page on which they are used. Authors of libraries that are reused by many authors are encouraged to include their name in the attribute names, to reduce the risk of clashes. Where it makes sense, library authors are also encouraged to make the exact name used in the attribute names customizable, so that libraries whose authors unknowingly picked the same name can be used on the same page, and so that multiple versions of a particular library can be used on the same page even when those versions are not mutually compatible.

For example, a library called "DoQuery" could use attribute names like data-doquery-range, and a library called "jJo" could use attributes names like data-jjo-range. The jJo library could also provide an API to set which prefix to use (e.g. J.setDataPrefix("j2"), making the attributes have names like data-j2-range).

element . dataset

Returns a DOMStringMap object for the element’s data-* attributes.

Hyphenated names are converted to dromedary-case (which is the same as camel-case except the initial letter is not uppercased). For example, data-foo-bar="" becomes element.dataset.fooBar.

The dataset IDL attribute provides convenient accessors for all the data-* attributes on an element. On getting, the dataset IDL attribute must return a DOMStringMap whose associated element is this element.

The DOMStringMap interface is used for the dataset attribute. Each DOMStringMap has an associated element.

[OverrideBuiltins]
interface DOMStringMap {
  getter DOMString (DOMString name);
  [CEReactions] setter void (DOMString name, DOMString value);
  [CEReactions] deleter void (DOMString name);
};

To get a DOMStringMap's name-value pairs, run the following algorithm:

  1. Let list be an empty list of name-value pairs.

  2. For each content attribute on the DOMStringMap's associated element whose first five characters are the string "data-" and whose remaining characters (if any) do not include any uppercase ASCII letters, in the order that those attributes are listed in the element’s attribute list, add a name-value pair to list whose name is the attribute’s name with the first five characters removed and whose value is the attribute’s value.

  3. For each name in list, for each U+002D HYPHEN-MINUS character (-) in the name that is followed by a lowercase ASCII letter, remove the U+002D HYPHEN-MINUS character (-) and replace the character that followed it by the same character in ASCII uppercase.

  4. Return list.

The supported property names on a DOMStringMap object at any instant are the names of each pair returned from getting the DOMStringMap’s name-value pairs at that instant, in the order returned.

To determine the value of a named property name for a DOMStringMap, return the value component of the name-value pair whose name component is name in the list returned from getting the DOMStringMap’s name-value pairs.

To set the value of a new named property or set the value of an existing named property for a DOMStringMap, given a property name name and a new value value, run the following steps:

  1. If name contains a U+002D HYPHEN-MINUS character (-) followed by a lowercase ASCII letter, then throw a "SyntaxError" DOMException and abort these steps.

  2. For each uppercase ASCII letter in name, insert a U+002D HYPHEN-MINUS character (-) before the character and replace the character with the same character in ASCII lowercase.

  3. Insert the string data- at the front of name.

  4. If name does not match the XML Name production, throw an "InvalidCharacterError" DOMException and abort these steps.

  5. Set an attribute value for the DOMStringMap's associated element using name and value.

To delete an existing named property name for a DOMStringMap, run the following steps:

  1. For each uppercase ASCII letter in name, insert a U+002D HYPHEN-MINUS character (-) before the character and replace the character with the same character in ASCII lowercase.

  2. Insert the string data- at the front of name.

  3. Remove an attribute by name given name, and the DOMStringMap's associated element.

This algorithm will only get invoked by the Web IDL specification for names that are given by the earlier algorithm for getting the DOMStringMap’s name-value pairs. [WEBIDL]

If a Web page wanted an element to represent a space ship, e.g., as part of a game, it would have to use the class attribute along with data-* attributes:
<div class="spaceship" data-ship-id="92432"
     data-weapons="laser 2" data-shields="50%"
     data-x="30" data-y="10" data-z="90">
  <button class="fire"
          onclick="spaceships[this.parentNode.dataset.shipId].fire()">
    Fire
  </button>
</div>

Notice how the hyphenated attribute name becomes dromedary-cased in the API.

Given the following fragment and elements with similar constructions:
<img class="tower" id="tower5" data-x="12" data-y="5"
     data-ai="robotarget" data-hp="46" data-ability="flames"
     src="towers/rocket.png" alt="Rocket Tower">

...one could imagine a function splashDamage() that takes some arguments, the first of which is the element to process:

function splashDamage(node, x, y, damage) {
  if (node.classList.contains('tower') && // checking the 'class' attribute
      node.dataset.x == x && // reading the 'data-x' attribute
      node.dataset.y == y) { // reading the 'data-y' attribute
    var hp = parseInt(node.dataset.hp); // reading the 'data-hp' attribute
    hp = hp - damage;
    if (hp < 0) {
      hp = 0;
      node.dataset.ai = 'dead'; // setting the 'data-ai' attribute
      delete node.dataset.ability; // removing the 'data-ability' attribute
    }
    node.dataset.hp = hp; // setting the 'data-hp' attribute
  }
}

3.2.6. The innerText IDL attribute

element . innerText [ = value ]

Returns the element’s text content "as rendered".

Can be set, to replace the element’s children with the given value, but with line breaks converted to br elements.

On getting, the innerText attribute must follow these steps:

  1. If this element is not being rendered, or if the user agent is a non-CSS user agent, then return the same value as the textContent IDL attribute on this element.

  2. Compute a list of items each of which is a string or a positive integer (a required line break count), by applying the following recursive procedure to each child node node of this element in tree order, and then concatenating the results to a single list of items.

    Intuitively, a required line break count item means that a certain number of line breaks appear at that point, but they can be collapsed with the line breaks induced by adjacent required line break count items, reminiscent to CSS margin-collapsing.

    1. Let items be the result of recursively applying this procedure to each child of node in tree order, and then concatenating the results to a single list of items.

    2. If node’s computed value of visibility is not "visible", then let the result of these substeps be items and abort these substeps.

    3. If node has no associated CSS box, then let the result of these substeps be items and abort these substeps. For the purpose of this step, the following elements must act as described if the computed value of the display property is not "none":

      • select elements have an associated non-replaced inline CSS box whose child boxes include only those of optgroup and option element child nodes;

      • optgroup elements have an associated non-replaced block-level CSS box whose child boxes include only those of option element child nodes; and

      • option element have an associated non-replaced block-level CSS box whose child boxes are as normal for non-replaced block-level CSS boxes.

      items can be non-empty due to "display:contents".

    4. If node is a Text node, then for each CSS text box produced by node, in content order, compute the text of the box after application of the CSS white-space processing rules and text-transform rules, let the result of these substeps be a list of the resulting strings, and abort these substeps. The CSS white-space processing rules are slightly modified: collapsible spaces at the end of lines are always collapsed, but they are only removed if the line is the last line of the block, or it ends with a br element. Soft hyphens should be preserved. [CSS-TEXT-3]

    5. If node is a br element, then append a string containing a single U+000A LINE FEED (LF) character to items.

    6. If node’s computed value of display is table-cell, and node’s CSS box is not the last table-cell box of its enclosing table-row box, then append a string containing a single U+0009 CHARACTER TABULATION (tab) character to items.

    7. If node’s computed value of display is table-cell, and node’s CSS box is not the last table-cell box of the nearest ancestor table box, then append a string containing a single U+000A LINE FEED (LF) character to items.

    8. If node is a p element, then add 2 (a required line break count) at the beginning and end of items.

    9. If node’s used value of display is block-level or table-caption, then add 1 (a required line break count) at the beginning and end of items. [CSS-DISPLAY-3]

      Floats and absolutely-positioned elements fall into this category.

    10. Let the result of these substeps be items.

  3. Delete any string items whose strings are empty.

  4. Delete any runs of consecutive required line break count items at the start or end of the list.

  5. Replace each remaining run of consecutive required line break count items with a string consisting of as many U+000A LINE FEED (LF) characters as the maximum of the values in the required line break count items.

  6. Return the concatenation of the string items.

Note that descendant nodes of most replaced elements (e.g., textarea, input, and video — but not button) are not rendered by CSS, strictly speaking, and therefore have no CSS boxes for the purposes of this algorithm.

On setting, the innerText attribute must follow these steps:

  1. Let document be this element’s node document.

  2. Let fragment be a new DocumentFragment object whose node document is document.

  3. Let input be the given value.

  4. Let pointer be a pointer into input, initially pointing at the start of the string.

  5. Let text be the empty string.

  6. While pointer is not past the end of input:

    1. Collect a sequence of characters that are not U+000A LINE FEED (LF) or U+000D CARRIAGE RETURN (CR) characters. Set text to the collected characters.

    2. If text is not the empty string, then append a new Text node whose data is text and node document is document to fragment.

    3. While pointer is not past the end of input, and the character at position is either a U+000A LINE FEED (LF) or U+000D CARRIAGE RETURN (CR) character:

      1. If the character at position is a U+000D CARRIAGE RETURN (CR) character and the next character is a U+000A LINE FEED (LF) character, then advance position to the next character in input.

      2. Advance position to the next character in input.

      3. Append the result of creating an element given document, br, and the HTML namespace to fragment.

  7. Replace all with fragment within this element.

3.2.7. Requirements relating to the bidirectional algorithm

3.2.7.1. Authoring conformance criteria for bidirectional-algorithm formatting characters

Text content in HTML elements with Text nodes in their contents, and text in attributes of HTML elements that allow free-form text, may contain characters in the ranges U+202A to U+202E and U+2066 to U+2069 (the bidirectional-algorithm formatting characters). [BIDI]

Authors are encouraged to use the dir attribute, the bdo element, and the bdi element, rather than maintaining the bidirectional-algorithm formatting characters manually. The bidirectional-algorithm formatting characters interact poorly with CSS.

3.2.7.2. User agent conformance criteria

User agents must implement the Unicode bidirectional algorithm to determine the proper ordering of characters when rendering documents and parts of documents. [BIDI]

The mapping of HTML to the Unicode bidirectional algorithm must be done in one of three ways. Either the user agent must implement CSS, including in particular the CSS unicode-bidi, direction, and content properties, and must have, in its user agent style sheet, the rules using those properties given in this specification’s rendering section, or, alternatively, the user agent must act as if it implemented just the aforementioned properties and had a user agent style sheet that included all the aforementioned rules, but without letting style sheets specified in documents override them, or, alternatively, the user agent must implement another styling language with equivalent semantics. [CSS-WRITING-MODES-3] [CSS3-CONTENT]

The following elements and attributes have requirements defined by the rendering section that, due to the requirements in this section, are requirements on all user agents (not just those that support the suggested default rendering):

3.2.8. WAI-ARIA and HTML Accessibility API Mappings

3.2.8.1. ARIA Authoring Requirements

Authors may use the ARIA role and aria-* attributes on HTML elements, in accordance with the requirements described in the ARIA specifications, except where these conflict with the requirements specified in ARIA in HTML [html-aria]. These exceptions are intended to prevent authors from making assistive technology products report nonsensical states that do not represent the actual state of the document. [wai-aria-1.1]

In the majority of cases setting an ARIA role and/or aria-* attribute that matches the default implicit ARIA semantics is unnecessary and not recommended as these properties are already set by the browser.

Authors are encouraged to make use of the following documents for guidance on using ARIA in HTML beyond that which is provided in this section:
  • Using ARIA - A practical guide for developers on how to to add accessibility information to HTML elements using the Accessible Rich Internet Applications specification [wai-aria-1.1].

  • WAI-ARIA Authoring Practices 1.1 - An author’s guide to understanding and implementing Accessible Rich Internet Applications.

3.2.8.2. Conformance Checker Implementation Requirements

Conformance checkers are required to implement document conformance requirements for use of the ARIA role and aria-* attributes on HTML elements, as defined in ARIA in HTML. [html-aria]

3.2.8.3. User Agent Implementation Requirements

User agents must implement ARIA semantics on all HTML elements, as defined in the ARIA specifications [wai-aria-1.1] and [core-aam-1.1].

User agents must implement Accessibility API semantics on all HTML elements, as defined in the HTML Accessibility API Mappings specification [html-aam-1.0].

The ARIA attributes defined in the ARIA specifications do not have any effect on CSS pseudo-class matching, user interface modalities that don’t use assistive technologies, or the default actions of user interaction events as described in this specification.

3.2.8.3.1. ARIA Role Attribute

Every HTML element may have an ARIA role attribute specified. This is an ARIA Role attribute as defined by [wai-aria-1.1].

The attribute, if specified, must have a value that is a set of space-separated tokens; each token must be a non-abstract role defined in the WAI-ARIA specification [wai-aria-1.1].

The WAI-ARIA role that an HTML element has assigned to it is the first non-abstract role found in the list of values generated when the role attribute is split on spaces.

3.2.8.3.2. State and Property Attributes

Every HTML element may have ARIA state and property attributes specified. These attributes are defined by [wai-aria-1.1].

A subset of the ARIA State and Property attributes are defined as "Global States and Properties" in the [wai-aria-1.1] specification.

These attributes, if specified, must have a value that is the ARIA value type in the "Value" field of the definition for the state or property, mapped to the appropriate HTML value type according to [wai-aria-1.1].

ARIA State and Property attributes can be used on any element. They are not always meaningful, however, and in such cases user agents might not perform any processing aside from including them in the DOM. State and property attributes are processed according to the requirements of the HTML Accessibility API Mappings specification [html-aam-1.0], as well as [wai-aria-1.1] and, as defined in the ARIA specifications [WAI-ARIA] and [core-aam-1.1].

3.2.8.4. Allowed ARIA roles, states and properties

This section is non-normative.

The following table provides an informative reference to the ARIA roles, states and properties permitted for use in HTML. Links to ARIA roles, states and properties in the table reference the normative definitions in the [wai-aria-1.1] specification.

ARIA Roles, States and Properties
Role Description Required Properties Supported Properties
any global aria-* attributes can be used on any HTML element. none
alert A message with important, and usually time-sensitive, information. See related alertdialog and status. none
alertdialog A type of dialog that contains an alert message, where initial focus goes to an element within the dialog. See related alert and dialog. none
application A structure containing one or more focusable elements requiring user input, such as keyboard or gesture events, that do not follow a standard interaction pattern supported by a widget role. none
article A section of a page that consists of a composition that forms an independent part of a document, page, or site. none
banner A region that contains mostly site-oriented content, rather than page-specific content. none
button An input that allows for user-triggered actions when clicked or pressed. See related link. none
checkbox A checkable input that has three possible values: true, false, or mixed. none
cell A cell in a tabular container. none
columnheader A cell containing header information for a column. none
combobox A presentation of a select; usually similar to a textbox where users can type ahead to select an option, or type to enter arbitrary text as a new item in the list. See related listbox.
complementary A supporting section of the document, designed to be complementary to the main content at a similar level in the DOM hierarchy, but remains meaningful when separated from the main content. none
contentinfo A large perceivable region that contains information about the parent document. none
definition A definition of a term or concept. none
dialog A dialog is an application window that is designed to interrupt the current processing of an application in order to prompt the user to enter information or require a response. See related alertdialog. none
directory A list of references to members of a group, such as a static table of contents. none
document A region containing related information that is declared as document content, as opposed to a web application. none
feed A scrollable list of articles where scrolling may cause articles to be added to or removed from either end of the list. none
figure A perceivable section of content that typically contains a graphical document, images, code snippets, or example text. none
form A landmark region that contains a collection of items and objects that, as a whole, combine to create a form. See related search. none
grid A grid is an interactive control which contains cells of tabular data arranged in rows and columns, like a table. none
gridcell A cell in a grid or treegrid. none
group A set of user interface objects which are not intended to be included in a page summary or table of contents by assistive technologies. none
heading A heading for a section of the page. none
img A container for a collection of elements that form an image. none
link An interactive reference to an internal or external resource that, when activated, causes the user agent to navigate to that resource. See related button. none
list A group of non-interactive list items. See related listbox. none
listbox A widget that allows the user to select one or more items from a list of choices. See related combobox and list. none
listitem A single item in a list or directory. none
log A type of live region where new information is added in meaningful order and old information may disappear. See related marquee. none
main The main content of a document. none
marquee A type of live region where non-essential information changes frequently. See related log. none
MathML math Content that represents a mathematical expression. none
menubar A presentation of menu that usually remains visible and is usually presented horizontally. none
navigation A collection of navigational elements (usually links) for navigating the document or related documents. none
none An element whose implicit native role semantics will not be mapped to the accessibility API. See synonym presentation. none none
note A section whose content is parenthetic or ancillary to the main content of the resource. none
option A selectable item in a select list. none
presentation An element whose implicit native role semantics will not be mapped to the accessibility API. none none
progressbar An element that displays the progress status for tasks that take a long time. none
radio A checkable input in a group of radio roles, only one of which can be checked at a time.
radiogroup A group of radio buttons. none
region A large perceivable section of a web page or document, that the author feels is important enough to be included in a page summary or table of contents, for example, an area of the page containing live sporting event statistics. none
row A row of cells in a grid. none
rowgroup A group containing one or more row elements in a grid. none
rowheader A cell containing header information for a row in a grid. none
scrollbar A graphical object that controls the scrolling of content within a viewing area, regardless of whether the content is fully displayed within the viewing area.
search A landmark region that contains a collection of items and objects that, as a whole, combine to create a search facility. See related form. none
searchbox A type of textbox intended for specifying search criteria.. none
separator A divider that separates and distinguishes sections of content.
slider A user input where the user selects a value from within a given range.
spinbutton A form of range that expects the user to select from among discrete choices.
status A container whose content is advisory information for the user but is not important enough to justify an alert, often but not necessarily presented as a status bar. See related alert. none
switch A type of checkbox that represents on/off values, as opposed to checked/unchecked values. none
tab A grouping label providing a mechanism for selecting the tab content that is to be rendered to the user. none
table A section containing data arranged in rows and columns. The table role is intended for tabular containers which are not interactive. none
tablist A list of tab elements, which are references to tabpanel elements. none
tabpanel A container for the resources associated with a tab, where each tab is contained in a tablist. none
term A word or phrase with a corresponding definition. See related definition. none none
textbox Input that allows free-form text as its value. none
timer A type of live region containing a numerical counter which indicates an amount of elapsed time from a start point, or the time remaining until an end point. none
toolbar A collection of commonly used function buttons represented in compact visual form. none
tooltip A contextual popup that displays a description for an element. none
tree A type of list that may contain sub-level nested groups that can be collapsed and expanded. none
treegrid A grid whose rows can be expanded and collapsed in the same manner as for a tree. none
treeitem An option item of a tree. This is an element within a tree that may be expanded or collapsed if it contains a sub-level group of treeitems. none

2 Common infrastructureTable of contents4 The elements of HTML