1. Principles behind design of Web APIs
The Design Principles are directly informed by the ethical framework set out in the Ethical Web Principles [ETHICAL-WEB]. These principles provide concrete practical advice in response to the higher level ethical responsibilities that come with developing the web platform.
1.1. Put user needs first (Priority of Constituencies)
If a trade-off needs to be made, always put user needs above all.
Similarly, when beginning to design an API, be sure to understand and document the user need that the API aims to address.
The internet is for end users: any change made to the web platform has the potential to affect vast numbers of people, and may have a profound impact on any person’s life. [RFC8890]
User needs come before the needs of web page authors, which come before the needs of user agent implementors, which come before the needs of specification writers, which come before theoretical purity.
Like all principles, this isn’t absolute. Ease of authoring affects how content reaches users. User agents have to prioritize finite engineering resources, which affects how features reach authors. Specification writers also have finite resources, and theoretical concerns reflect underlying needs of all of these groups.
See also:
1.2. It should be safe to visit a web page
When adding new features, design them to preserve the user expectation that visiting a web page is generally safe.
The Web is named for its hyperlinked structure. In order for the web to remain vibrant, users need to be able to expect that merely visiting any given link won’t have implications for the security of their computer, or for any essential aspects of their privacy.
For example, an API which allows any website to detect the use of assistive technologies may make users of these technologies feel unsafe visiting unknown web pages, since any web page may detect this private information.
If users have a realistic expectation of safety, they can make informed decisions between Web-based technologies and other technologies. For example, users may choose to use a web-based food ordering page, rather than installing an app, since installing a native app is riskier than visiting a web page.
To work towards making sure the reality of safety on the web matches users' expectations, we can take complementary approaches when adding new features:
-
We can improve the user interfaces through which the Web is used to make it clearer what users of the Web should (and should not) expect;
-
We can change the technical foundations of the Web so that they match user expectations of privacy;
-
We can consider the cases where users would be better off if expectations were higher, and in those cases try to change both technical foundations and expectations.
A new feature which introduces safety risks may still improve user safety overall, if it allows users to perform a task more safely on a web page than it would be for them to install a native app to do the same thing. However, this benefit needs to be weighed against the common goal of users having a reasonable expectation of safety on web pages.
See also:
1.3. Trusted user interface should be trustworthy
Consider whether new features impact trusted user interfaces.
Users depend on trusted user interfaces such as the address bar, security indicators and permission prompts, to understand who they are interacting with and how. These trusted user interfaces must be able to be designed in a way that enables users to trust and verify that the information they provide is genuine, and hasn’t been spoofed or hijacked by the website.
If a new feature allows untrusted user interfaces to resemble trusted user interfaces, this makes it more difficult for users to understand what information is trustworthy.
For example, JavaScript alert()
allows a page to show a modal dialog which looks like part of the browser.
This is often used to attempt to trick users into visiting scam websites.
If this feature was proposed today, it would probably not proceed.
1.4. Ask users for meaningful consent
If a useful feature has the potential to cause harm to users, make sure that the user can give meaningful consent for that feature to be used, and that they can refuse consent effectively.
In order to give meaningful consent, the user must:
-
understand what permission they may choose whether to grant the web page
-
be able to choose to give or refuse that permission effectively.
If a feature is powerful enough to require user consent, but it’s impossible to explain to a typical user what they are consenting to, that’s a signal that you may need to reconsider the design of the feature.
If a permission prompt is shown, and the user doesn’t grant permission, the Web page should not be able to do anything that the user believes they have refused consent for.
By asking for consent, we can inform the user of what capabilities the web page does or doesn’t have, reinforcing their confidence that the web is safe. However, the user benefit of a new feature must justify the additional burden on users to decide whether to grant permission for each feature whenever it’s requested by a Web page.
For example, the Geolocation API grants access to a user’s location. This can help users in some contexts, like a mapping application, but may be dangerous to some users in other contexts - especially if used without the user’s knowledge. So that the user may decide whether their location may be used by a Web page, a permission prompt should be shown to the user asking whether to grant location access. If the user refuses permission, no location information is available to the Web page.
See also:
1.5. Support the full range of devices and platforms (Media Independence)
As much as possible, ensure that features on the web work across different input and output [devices, screen sizes, interaction modes, platforms, and media] (https://www.w3.org/2001/tag/doc/ethical-web-principles/#multi).
One of the main values of the Web is that it’s extremely flexible: a Web page may be viewed on virtually any consumer computing device at a very wide range of screen sizes, may be used to generate printed media, and may be interacted with in a large number of different ways. New features should match the existing flexibility of the web platform.
These features still work across a wide variety of contexts, and can be adapted to devices that don’t support their original intent - for example, a tap on a mobile device will fire a click event as a fallback.
Features should also be designed so that the easiest way to use them maintains flexibility.
Sometimes features aren’t yet available on some implementations or platforms despite working on others. In these cases, features should be designed such that it is possible for code to gracefully fail or be polyfilled. See § 2.5 New features should be detectable.
1.6. Add new capabilities with care
Add new capabilities to the web with consideration of existing functionality and content.
The Web includes many extension points that allow for additions; see for example HTML § 1.7.3 Extensibility.
Before adding items, consider integration with existing, similar capabilities. If this leads to a preferred design approach that cannot be implemented by only adding items, it might still be possible; see § 1.7 Remove or change capabilities only once you understand existing usage.
Do not assume that a change or removal is impossible without first checking. Before adding items, consider integration with existing, similar capabilities. If this leads to a preferred design approach that cannot be implemented by only adding items, it might still be possible; see § 1.7 Remove or change capabilities only once you understand existing usage. Do not assume that a change or removal is impossible without first checking.
1.7. Remove or change capabilities only once you understand existing usage
Prioritize compatibility with existing content when removing or changing functionality.
Once a significant amount of content has come to depend on a particular behavior, removing or changing that behavior is discouraged. Removing or changing features and capabilities is possible, but it first requires that the nature and scope of the impact on existing content is well understood. This might require research into how features are used by existing content.
The obligation to understand existing usage also applies to any features that content relies upon. This includes vendor-proprietary features and behavior that might be considered implementation bugs. Web features are not solely defined in specifications; they are also defined by how content uses those features.
1.8. Leave the web better than you found it
As you add new capabilities to the web platform, do so in a way that improves the overall platform, for example its security or privacy vulnerabilities, or accessibility characteristics. The existence of a defect in one part of the platform must not be used as a license for adding or extending such defect into new capabilities and thereby further decreasing the overall platform quality. Where possible, build new web capabilities that improve the overall platform quality.
Parts of the web platform evolve independently. Issues that are present with a certain web technology now may be fixed in a subsequent iteration. Duplicating these issues makes fixing them more difficult. By adhering to this principle we can make sure overall platform quality improves over time.
1.9. Minimize user data
Design features to work with the minimum amount of data necessary to carry out their users' goals.
Data minimization limits the risks of data being inappropriately disclosed or misused.
Design Web APIs to make it easier for sites to request, collect, and/or transmit a small amount of data, or more granular or specific data, than it is to work with more generic or bulk data. APIs should also provide granularity and user controls, in particular over personal data, that is communicated to sites. When additional functionality requires additional data, APIs can enable this subject to user consent (e.g., a permission prompt or user activation).
2. API Design Across Languages
2.1. Prefer simple solutions
Look hard for simple solutions to the user needs you intend to address.
Simple solutions are generally better than complex solutions, although they may be harder to find. Simpler features are easier for user agents to implement and test, more likely to be interoperable, and easier for authors to understand. It is especially important to design your feature so that the most common use cases are easy to accomplish.
Make sure that your user needs are well-defined. This allows you to avoid scope creep, and make sure that your API does actually meet the needs of all users. Of course, complex or rare use cases are also worth solving, though their solutions may be more complicated to use. As Alan Kay said, "simple things should be simple, complex things should be possible."
Do note however that while common cases are often simple, commonality and complexity are not always correlated.
See also:
2.2. Consider tradeoffs between high level and low level APIs
High-level APIs allow user agents more ability to intervene in various ways on behalf of the user, such as to ensure accessibility, privacy, or usability.
A font picker (high level API) was recommended by the TAG over a Font Enumeration API (low level API) as it addresses the bulk of use cases, while preserving user privacy, as it is free from the the fingerprinting concerns that accompany a general Font Enumeration API. A native font picker also comes with accessibility built-in, and provides consistency for end users.
Low-level APIs afford authors room for experimentation so that high level APIs can organically emerge from usage patterns over time. They also provide an escape hatch when the higher-level API is not adequate for the use case at hand.
Lower level building blocks cannot always be exposed as Web APIs. A few possible reasons for this are to preserve the user’s security and privacy, or to avoid tying Web APIs to specific hardware implementations. However, high level APIs should be designed in terms of building blocks over lower level APIs whenever possible. This may guide decisions on how high level the API needs to be.
A well-layered solution should ensure continuity of the ease-of-use vs power tradeoff curve and avoid sharp cliffs where a small amount of incremental use case complexity results in a large increase of code complexity.
2.3. Name things thoughtfully
Name APIs with care. Naming APIs well makes it much easier for authors to use them correctly.
See the more detailed Naming principles section for specific guidance on naming.
2.4. Be consistent
It is good practice to consider precedent in the design of your API and to try to be consistent with it.
There is often a tension between API ergonomics and consistency, when existing precedent is of poor usability. In some cases it makes sense to break consistency to improve usability, but the improvement should be very significant to justify this.
Since the web platform has gradually evolved over time, there are often multiple conflicting precedents which are mutually exclusive. You can weigh which precedent to follow by taking into account prevalence (all else being equal, follow the more popular precedent), API ergonomics (all else being equal, follow the more usable precedent), and API age (all else being equal, follow the newer precedent).
There is often a tension between internal and external consistency. Internal consistency is consistency with the rest of the system, whereas external consistency is consistency with the rest of the world. In the web platform, that might materialize in three layers: consistency within the technology the API belongs to (e.g. CSS), consistency with the rest of the web platform, and in some cases external precedent, when the API relates to a particular specialized outside domain. In those cases, it is useful to consider what the majority of users will be. Since for most APIs the target user is someone who is familiar with the technology they are defined in, err on the side of favoring consistency with that.
There is also a separate section on naming consistency.
2.5. New features should be detectable
Provide a way for authors to programmatically detect whether your feature is available, so that web content may gracefully handle the feature not being present.
An existing feature may not be available on a page for a number of reasons. Two of the more common reasons are because it hasn’t been implemented yet, or because it’s only available in secure contexts.
Authors shouldn’t need to write different code to handle each scenario. That way, even if an author only knows or cares about one scenario, the code will handle all of them.
When a feature is available but isn’t feasible to use because a required device isn’t present, it’s better to expose that the feature is available and have a separate way to detect that the device isn’t. This allows authors to handle a device not being available differently from the feature not being available, for example by suggesting the user connect or enable the device.
See § 9.2 Use care when exposing APIs for selecting or enumerating devices.
Authors should always be able to detect a feature from JavaScript, and in some cases the feature should also be detectable in the language where it’s used (such as @supports in CSS).
In some cases, it may not be appropriate to allow feature detection. Whether the feature should be detectable or not should be based on the user need for the feature: if there is a user need or design principle which would fail if feature detection were available for the feature, then you should not support feature detection.
Also, if a feature is generally not exposed to developers, it is not appropriate to support feature detection. For example, private browsing mode is a concept which is recognised in web specifications, but not exposed to authors. For private browsing mode to support the user’s needs, it must not be feature detected.
See also:
2.6. Consider limiting new features to secure contexts
Always limit your feature to secure contexts if it would pose a risk to the user without the authentication, integrity, or confidentiality that’s present only in secure contexts.
For other features, TAG members past and present haven’t reached consensus on general advice. Some believe that all new features (other than features which are additions to existing features) should be limited to secure contexts. This would help encourage the use of HTTPS, helping users be more secure in general.
Others believe that features should only be limited to secure contexts if they have a known security or privacy impact. This lowers the barrier to entry for creating web pages that take advantage of new features which don’t impact user security or privacy.
SecureContext
] extended attribute
on interfaces, namespaces, or their members (such as methods and attributes).
However, for some types of API (e.g., dispatching an event),
limitation to secure contexts should just
be defined in normative prose in the specification.
If this is the case,
consider whether there might be scope for adding a similar mechanism
to [SecureContext
]
to make this process easier for future API developers.
However, if, for some reason there is no way for code to gracefully handle the feature not being present, limiting the feature to secure contexts might cause problems for code (such as libraries) that may be used in either secure or non-secure contexts.
2.7. Don’t reveal that private browsing mode is engaged
Make sure that your feature doesn’t give authors a way to detect private browsing mode.
Some people use private browsing mode to protect their own personal safety. Because of this, the fact that someone is using private browsing mode may be sensitive information about them. This information may harm people if it is revealed to a web site controlled by others who have power over them (such as employers, parents, partners, or state actors).
Given such dangers, websites should not be able to detect that private browsing mode is engaged.
to act as if the user had immediately aborted the payment request.
This enables User Agents to automatically abort payment requests in private browsing mode (thus protecting sensitive information such as the user’s shipping or billing address) without revealing that private browsing mode is engaged.
See also:
2.8. Consider how your API should behave in private browsing mode
If necessary, specify how your API should behave differently in private browsing mode.
For example, if your API would reveal information that would allow someone to correlate a single user’s activity both in and out of private browsing mode, consider possible mitigations such as introducing noise, or using permission prompts to give the user extra information to help them meaningfully consent to this tracking (see § 1.4 Ask users for meaningful consent).
Private browsing modes enable users to browse the web without leaving any trace of their private browsing on their device. Therefore, APIs which provide client-side storage should not persist data stored while private browsing mode is engaged after it’s disengaged. This can and should be done without revealing any detectable API differences to the site.
If the User Agent has two simultaneous sessions with a site, one in private browsing mode and one not, storage area changes made in the private browsing mode session should not be revealed to the other browsing session, and vice versa. (The storage event should not be fired at the other session’s window object.)
See also:
2.9. Don’t reveal that assistive technologies are being used
Make sure that your API doesn’t provide a way for authors to detect that a user is using assistive technology without the user’s consent.
The web platform must be accessible to people with disabilities. If a site can detect that a user is using an assistive technology, that site can deny or restrict the user’s access to the services it provides.
People who make use of assistive technologies are often vulnerable members of society; their use of assistive technologies is sensitive information about them. If an API provides access to this information without the user’s consent, this sensitive information may be revealed to others (including state actors) who may wish them harm.
Sometimes people propose features which aim to improve the user experience for users of assistive technology, but which would reveal the user’s use of assistive technology as a side effect. While these are well intentioned, they violate § 1.2 It should be safe to visit a web page, so alternative solutions must be found.
The Accessibility Object Model (AOM) used to define a set of events which, when fired, revealed the use of assistive technology.
AOM has since removed these events and replaced them with synthetic DOM events which don’t reveal the use of assistive technology.
See also:
2.10. Require user activation for powerful APIs
Some powerful APIs can produce intrusive UI (eg. auto-playing audio), expose user data (eg. interacting with the clipboard), perform a background activity without an obvious indicator to the user (eg. accessing local storage), or prompt the user to interact with trusted UI (eg. permission prompts, device hardware features). These APIs should be designed to require some indication of user intention (such as user activation) in order to function. This indicates that the user is intentionally interacting with the web page in question.
User activation is defined in detail in the HTML standard. You should think about the effect your API has on the user experience, as well as any risks presented to the user, when deciding whether user activation needs to only occur once overall (sticky), periodically (transient) or once per API call (transient consuming).
Note that while user activation is in many cases necessary, it is not always sufficient to protect users from invasive behaviours, and seeking meaningful consent is also important.
2.11. Support non-fully active BFCached documents
Specify how your feature behaves in non-fully active BFCached (Back/forward cached) documents if possible.
If your feature does anything that falls into the following categories:
-
Interacts with a document from the "outside" (e.g. sends information to a document)
-
Makes cross-document interaction/resource sharing possible (e.g. holding locks)
-
May malfunction when a document is kept in a non-fully active BFCached state (instead of getting destroyed) after the user navigates away from it or gets restored (e.g. expects that a state saved in the document won’t span multiple navigations)
Specify how your feature works with non-fully active BFCached documents, following the guidelines in the Supporting BFCached Documents guide.
Note: It is possible for a document to become non-fully active for other reasons not related to BFcaching, such as when the iframe holding the document gets detached. This guidance only focuses on the case where BFCache is involved, and not other cases that might cause a document to become non-fully active.
2.12. Prioritize usability over compatibility with third-party tools
Design new features with usability as the primary goal, and compatibility with third-party tooling as a secondary goal.
The web platform benefits from a wide ecosystem of tooling to facilitate easier and faster development. A lot of the time, the syntax of an upcoming web platform feature may conflict with that of a third-party tool causing breakage. This is especially common as third-party tools are often used to prototype new web platform features.
In general, web platform features last a lot longer than most third-party tools, and thus giving them the optimal syntax and functionality should be of high priority.
In some cases, the conflict will introduce problems across a large number of web sites, necessitating the feature’s syntax to be redesigned to avoid clashes.
Array.prototype.contains()
had to be renamed to Array.prototype.includes()
to avoid clashes with
the identically named but incompatible method from PrototypeJS,
a library that was in use in millions of websites. However, these cases should be exceptions.
When deciding whether to break third party tools with new syntax, there are several factors to consider, such as severity of the breakage, popularity of the third party tool, and many more.
Possibly the most important factor is how severely would the usability of the web platform feature be compromised if its syntax was changed to avoid breaking the third party tool? If several alternatives of similar usability are being considered, it is usually preferable to prioritize the ones that inconvenience third party tools the least.
However, if avoiding breaking the third party tool would lead to a significant negative impact on of the feature’s usability, that is rarely an acceptable tradeoff, unless it causes significant breakage of live websites.
Languages should also provide mechanisms for extensibility that authors can use to extend the language without breaking future native functionality, to reduce such dilemmas in the future.
3. HTML
This section details design principles for features which are exposed via HTML.
3.1. Re-use attribute names (only) for similar functionality
If you are adding a feature that is specified through an HTML attribute, check if there is an existing attribute name on another element that specifies similar functionality. Re-using an existing attribute name means authors can utilize existing knowledge, maintains consistency across the language, and keeps its vocabulary small.
multiple
,
is used on both select
to allow selection of multiple values,
as well as on input
to allow entry of multiple values. If you do re-use an existing attribute, try to keep its syntax as close as possible to the syntax of the existing attribute.
for
attribute was introduced on the label
element,
for specifying which form element it should be associated with.
It was later re-used by output
,
for specifying which elements contributed
input values to or otherwise affected the calculation.
The syntax of the latter is broader:
it accepts a space-separated list of ids,
whereas the former only accepts one id.
However, they both still conform to the same syntax,
whereas e.g. if one of them accepted a list of ids,
and the other one a selector, that would be an antipattern. The inverse also applies: do not re-use an existing attribute name if the functionality you are adding is not similar to that of the existing attribute.
type
attribute is used on the input
and button
elements
to further specialize the element type,
whereas on every other element (e.g. link
, script
, style
)
it specifies MIME type.
This is an antipattern; one of these groups of attributes should have had a different name. 3.2. Use space-separated attributes for short lists of values, separate elements for longer lists
When specifying metadata about an element that can be a list of values,
common practice is to use a space-separated list and expose it as a DOMTokenList
.
The class
attribute on elements takes a space-separated list of class names. classList
is a DOMTokenList
that allows authors to add and remove class names.
The sandbox
attribute takes a space-separated list of sandbox flags. iframe.sandbox
is a DOMTokenList
that allows authors to add and remove sandbox flags.
Consistency with other parts of the Web Platform is important, even if this means using another character to separate values.
The accept
attribute is a comma-separated list of values,
because it needs to match the syntax of the Accept
HTTP header. (See guidance on HTTP headers)
Regardless of syntax, attributes should only be used for short lists of values. For longer lists, embedding the entire list in an attribute is discouraged. Instead, current practice is to use separate elements to represent the list items (and any metadata about them). These elements could either be children of the element in question, or linked through an attribute.
The list of values for the select
element is provided as a series of option
element children.
However, when providing a list of recommended values for an input
element, a separate element is used (datalist
),
linked through a list
attribute.
The list of media sources for a video
or audio
element is provided as a series of source
element children.
In rare instances, other tradeoffs are necessary.
The srcset
attribute allows for a comma-separated list of image candidate strings.
This syntax was chosen over a list of child elements to avoid verbosity
and because the img
element is an empty element that does not permit child elements.
A space-separated syntax would not have been possible, as each list item includes multiple values.
3.3. Do not pause the HTML parser
Ensure that your design does not require HTML parser to pause to handle external resources.
As a page parses, the browser discovers assets that the page needs, and figures out a priority in which they should be loaded in parallel. Such parsing can be disrupted by a resource which blocks the discovery of subsequent resources. At worst, it means the browser downloads items in series rather than parallel. At best, it means the browser queues downloads based on speculative parsing, which may turn out to be incorrect.
Features that block the parser generally do so
because they want to feed additional content into the parser
before subsequent content.
This is the case of legacy <script src="…">
elements,
which can inject into the parser using document.write(…)
.
Due to the performance issues above, new features must not do this.
3.4. Avoid features that block rendering
Features that require resource loading or other operations before rendering the page, often result in blank page (or the previous page). The result is a poor user experience.
Consider adding such features only in cases when the overall user experience is improved. A canonical example of this is blocking rendering in order to download and process a stylesheet. The alternative user experience is a flash of unstyled content, which is undesirable.
See also § 10.2.1 Some APIs should only be exposed to dedicated workers.
3.5. Keep attributes in sync
New content attributes should have a corresponding IDL attribute with the same name, and the state between the two should be kept synchronized. Carving out a synchronized IDL attribute with inconsistent naming results in confusion, and should be avoided.
input
's value
, option
's selected
, and input
's checked
where the HTML attributes were never updated
and the IDL attribute was the single source of truth. 3.6. Name URL-containing attributes based on their primary purpose
If the element enables the user to navigate to the URL contained in the attribute, call the attribute href
, like the a
element’s href
attribute.
Note: In hindsight, form
's action
attribute should have been named href
.
If the element causes the resource at the given URL to be loaded, call the attribute src
, like the img
element’s src
attribute or the script
element’s src
attribute.
Note: HTML has a number of legacy inconsistencies that should not be emulated, like the way link
's href
attribute might allow for navigation or for resource loading, depending on the value of the element’s rel
attribute.
If the attribute identifies a URL that is auxilliary to the element’s purpose, like video
's poster
, q
's cite
, or a
’s ping
, name the attribute after its semantics.
Note: remember that attributes containing URLs should be represented in IDL as USVString
; see § 8.2 Represent strings appropriately.
4. Cascading Style Sheets (CSS)
This section details design principles for features which are exposed via CSS.
4.1. Separate CSS properties based on what should cascade separately
Decide which values should be grouped together as CSS properties and which should be separate properties based on what makes sense to set independently.
CSS cascading allows declarations from different rules or different style sheets to override one another. A set of values that should all be overridden together should be grouped together in a single property so that they cascade together. Likewise, values that should be able to be overridden independently should be separate properties.
However, the initial-letter-align property should be separate because it sets an alignment policy for all of these effects across the document which is a general stylistic choice and a function of the script (e.g., Latin, Cyrillic, Arabic) used in the document.
4.2. Make appropriate choices for whether CSS properties are inherited
Decide whether a property should be inherited based on whether the effect of the property should be overridden or added to if set on an ancestor as well as a descendant.
If setting the property on a descendant element needs to override (rather than add to) the effect of setting it on an ancestor, then the property should probably be inherited.
If setting the property on a descendant element is a separate effect that adds to setting it on an ancestor, then the property should probably not be inherited.
A specification of an non-inherited property requiring that the handling of an element look at the value of that property on its ancestors (which may also be slow) is a "code smell" that suggests that the property likely should have been inherited. A specification of an inherited property requiring that the handling of an element ignore the value of a property if it’s the same as the value on the parent element is a "code smell" that suggests that the property likely should not have been inherited.
If the background-image property had been inherited, then the specification would have had to create a good bit of complexity to avoid a partially-transparent image being visibly repeated for each descendant element. This complexity probably would have involved behaving differently if the property had the same value on the parent element, which is the "code smell" mentioned above that suggests that a property likely should not have been inherited.
If the font-size property were not inherited, then it would probably have to have an initial value that requires walking up the ancestor chain to find the nearest ancestor that doesn’t have that value. This is the "code smell" mentioned above that suggests that a property likely should have been inherited.
4.3. Choose the computed value type based on how the property should inherit
Choose the computed value of a CSS property based on how it will inherit, including how values where it depends on other properties should inherit.
Inheritance means that an element gets the same computed value for a property that its parent has. This means that processing steps that happen before reaching the computed value affect the value that is inherited, and those that happen after (such as for the used value) do not.
getComputedStyle()
method. However, the computed value in this case is the <number> 1.4, not the <length> 28px. (The used value is 28px.)
The line-height property can be inherited into elements that have a different font-size, and any property on those elements which depends on line-height must take the relevant font-size into account, rather than the font-size for the element from which the line-height value was inherited.
< body style = "font-size: 20px; line-height: 1.4" > < p > This body text has a line height of 28px.</ p > < h2 style = "font-size: 200%" > This heading has a line-height of 56px, not 28px, even though the line-height was declared on the body. This means that the 40px font won’t overflow the line height.</ h2 > </ body >
These number values are generally the preferred values to use for line-height because they inherit better than length values.
See also:
4.4. Name CSS properties and values appropriately
The names of CSS properties are usually nouns, and the names of their values are usually adjectives (although sometimes nouns).
Words in properties and values are separated by hyphens. Abbreviations are generally avoided.
Use the root form of words when possible rather than a form with a grammatical prefix or suffix (for example, "size" rather than "sizing").
The list of values of a property should generally be chosen so that new values can be added. Avoid values like yes, no, true, false, or things with more complex names that are basically equivalent to them.
Avoid words like "mode" or "state" in the names of properties, since properties are generally setting a mode or state.
See § 12 Naming principles for general (cross-language) advice on naming.
4.5. Content should be viewable and accessible by default
Design CSS properties or CSS layout systems (which are typically values of the display
property),
to preserve the content as viewable, accessible and usable by default.
overflow: hidden
or left: -40em
). They should not happen by
default as a result of something like display: flex
or position: relative
. 5. JavaScript Language
5.1. Use JavaScript for Web APIs
When designing imperative APIs for the Web, use JavaScript. In particular, you can freely rely upon language-specific semantics and conventions, with no need to keep things generalized.
CustomElementRegistry.define()
method takes a reference to
a Constructor Method.
This takes advantage of the relatively recent addition of classes to JavaScript, and the fact that method references are very easy to use in JavaScript.
5.2. Preserve run-to-completion semantics
Don’t modify data accessed via JavaScript APIs while a JavaScript event loop is running.
A JavaScript Web API is generally a wrapper around a feature implemented in a lower-level language, such as C++ or Rust. Unlike those languages, when using JavaScript developers can expect that once a piece of code begins executing, it will continue executing until it has completed.
Because of that, JavaScript authors take for granted that the data available to a function won’t change unexpectedly while the function is running.
So if a JavaScript Web API exposes some piece of data, such as an object property, the user agent must not update that data while a JavaScript task is running. Instead, if the underlying data changes, queue a task to modify the exposed version of the data.
navigator.onLine
property,
and browser’s online status changes,
the property won’t be updated until the next task runs. 5.3. Don’t expose garbage collection
Ensure your JavaScript Web APIs don’t provide a way for an author to know the timing of garbage collection.
The timing of garbage collection is different in different user agents, and may change over time as user agents work on improving performance. If an API exposes the timing of garbage collection, it can cause programs to behave differently in different contexts. This means that authors need to write extra code to handle these differences. It may also make it more difficult for user agents to implement different garbage collection strategies, if there is enough code which depends on timing working a particular way.
This means that you shouldn’t expose any API that acts as a weak reference,
e.g. with a property that becomes
once garbage collection runs.
Object and data lifetimes in JavaScript code should be predictable.
getElementsByTagName
returns an HTMLCollection
object,
which may be re-used if the method is called twice on the same Document object,
with the same tag name.
In practice,
this means that the same object will be returned
if and only if it has not been garbage collected.
This means that the behaviour is different depending on
the timing of garbage collection.
If getElementsByTagName
were designed today,
the advice to the designers would be
to either reliably reuse the output,
or to produce a new HTMLCollection
each time it’s invoked.
getElementsByTagName
gives no sign that
it may depend on the timing of garbage collection.
In contrast, APIs which are explicitly designed
to depend on garbage collection,
like WeakRef
or FinalizationRegistry
,
set accurate author expectations about
the interaction with garbage collection.
6. JavaScript API Surface Concerns
6.1. Attributes should behave like data properties
[WEBIDL] attributes should act like simple JavaScript object properties.
In reality, IDL attributes are implemented as accessor properties with separate getter and setter methods. To make them act like JavaScript object properties:
-
Getters must not have any observable side effects.
-
Getters should not perform any complex operations.
-
Ensure that
obj
is always true. Don’t create a new value each time the getter is called.. attribute=== obj. attribute -
If possible, ensure that given
obj
,. attribute= xobj
is true. (This may not be possible if some kind of conversion is necessary for. attribute=== xx
.)
If you were thinking about using an attribute, but it doesn’t behave this way, you should probably use a method instead.
offsetTop
performs layout,
which can be complex and time-consuming.
It would have been better if this had been a method like getBoundingClientRect()
. 6.2. Consider whether objects should be live or static
If an API gives access to an object representing some internal state, decide whether that object should continue to be updated as the state changes.
An object which represents the current state at all times is a live object, while an object which represents the state at the time it was created is a static object.
Live objects
If an object allows the author to change the internal state,
that object should be live.
For example, DOM Node
s are live objects,
to allow the author to make changes to the document
with an understanding of the current state.
Properties of live objects may be computed as they are accessed, instead of when the object is created. This makes live objects sometimes a better choice if the data needed is complex to compute, since there is no need to compute all the data before the object is returned.
A live object may also use less memory, since there is no need to copy data to a static version.
Static objects
If an object represents a list that might change, most often the object should be static. This is so that code iterating over the list doesn’t need to handle the possibility of the list changing in the middle.
getElementsByTagName
returns a live object which represents a list,
meaning that authors need to take care when iterating over its items:
let list= document. getElementsByTagName( "td" ); for ( let i= 0 ; i< list. length; i++ ) { let td= list[ i]; let tr= document. createElement( "tr" ); tr. innerHTML= td. outerHTML; // This has the side-effect of removing td from the list, // causing the iteration to become unpredictable. td. parentNode. replaceChild( tr, td); }
The choice to have querySelectorAll()
return static objects
was made after spec authors noticed that getElementsByTagName
was causing problems.
URLSearchParams
isn’t static,
even though it represents a list,
because it’s the way for authors to change the query string of a URL.
Note: For maplike and setlike types, this advice may not apply, since these types were designed to behave well when they change while being iterated.
If it would not be possible to compute properties at the time they are accessed, a static object avoids having to keep the object updated until it’s garbage collected, even if it isn’t being used.
If a static object represents some state which may change frequently, it should be returned from a method, rather than available as an attribute.
See also:
6.3. Use attributes or methods appropriately
Sometimes it is unclear whether to use an attribute or a method.
-
Attribute getters must not have any (observable) side effects. If you have expected side effects, use a method.
-
Attribute getters should not throw exceptions. Getters should behave like regular data properties, and regular data properties do not throw exceptions when read. Furthermore, invalid state should generally be avoided by rejecting writes, not when data is read. Updating existing getters to throw exceptions should be avoided as existing API users may enumerate or wrap the API and not expect the new exception, breaking backwards compatibility.
-
Attribute getters should not perform any blocking operations. If a getter requires performing a blocking operation, it should be a method.
-
If the underlying object has not changed, attribute getters should return the same object each time it is called. This means
obj.attribute === obj.attribute
must always hold. Returning a new value from an attribute getter each time is not allowed. If this does not hold, the getter should be a method.
Note: An antipattern example of a blocking operation is with getters like offsetTop performing layout.
For attributes, whenever possible,
preserve values given to the setter
for return from the getter.
That is, given obj.attribute = x
,
a subsequent obj.attribute === x
should be true.
(This will not always be the case,
e.g., if a normalization or type conversion step is necessary,
but should be held as a goal for normal code paths.)
The object you want to return may be live or static. This means:
-
If live, then return the same object each time, until a state change requires a different object to be returned. This can be returned from either an attribute or a method.
-
If static, then return a new object each time. In which case, this should be be a method.
6.4. Accept optional and/or primitive arguments through dictionaries
API methods should generally use dictionary arguments instead of a series of optional arguments.
This makes the code that calls the method more readable, and the method signature easier to remember. It also makes the API more extensible in the future, particularly if multiple arguments with the same type are needed.
new Event( "example" , { bubbles: true , cancelable: false })
is much more readable than
new Event( "example" , true , false )
You should also consider accepting mandatory parameters through a dictionary, if it would make the API more readable, especially when they are of primitive types.
The dictionary itself should be an optional argument, so that if the author is happy with all of the default options, they can avoid passing an extra argument.
See also:
6.5. Make method arguments optional if possible
If an argument for an API method has a reasonable default value, make that argument optional and specify the default value.
addEventListener()
takes an optional boolean useCapture
argument.
This defaults to false
, meaning that
the event should be dispatched to the listener in the bubbling phase by default. Note: Exceptions have been made for legacy interoperability reasons
(such as XMLHttpRequest
),
but this should be considered a design mistake rather than recommended practice.
The API must be designed so that if an argument is left out,
the default value used is the same as
converting undefined
to the type of the argument.
For example, if a boolean argument isn’t set,
it must default to false.
When deciding between different list data types for your API, unless otherwise required, use the following list types:
-
Method list arguments should be of type sequence<T>
-
Method return values should be of type sequence<T>
-
Attributes should be of type ObservableArray<T>
See also:
6.6. Name optional arguments appropriately
Name optional arguments to make the default behavior obvious without being named negatively.
This applies whether they are provided in a dictionary or as single arguments.
addEventListener()
takes an options
object
which includes an option named once
.
This indicates that the listener should not be invoked repeatedly.
This option could have been named repeat
,
but that would require the default to be true
.
Instead of naming it noRepeat
,
the API authors named it once
,
to reflect the default behaviour without using a negative.
Other examples:
-
passive
rather thanactive
, or -
isolate
rather thanconnect
, or -
private
rather thanpublic
See also:
6.7. Use overloading wisely
If the behaviour of a method will be significantly different depending on the arguments passed you should usually define a separate method rather than overload a single method.
Overloading a method such that one of its arguments can be either a single value or an array of values is useful. Similarly, passing a dictionary of options is a good pattern because it allows for more flexibility.
However, if subsequent arguments for a method have to change because of the first argument passed, or if a method has different behaviour depending on the types of inputs, this can hinder code readability, and make discovering API functionality more difficult for authors, and should be avoided.
6.8. Classes should have constructors when possible
Make sure that any class that’s part of your API has a constructor, if appropriate.
By default, [WEBIDL] interfaces generate "non-constructible" classes:
trying to create instances of them using new X()
will throw a TypeError
.
To make them constructible,
you can add appropriate constructor operations to your interface,
and defining the algorithm for creating new instances of your class.
This allows JavaScript developers to create instances of the class for purposes such as testing, mocking, or interfacing with third-party libraries which accept instances of that class. It also gives authors the ability to create a subclass of the class, which is otherwise prevented, because of the way JavaScript handles subclasses.
This won’t be appropriate in all cases. For example:
-
Some objects represent access to privileged resources, so they need to be constructed by factory methods which can access those resources.
-
Some objects have very carefully controlled lifecycles, so they need to be created and accessed through specific methods.
-
Some objects represent an abstract base class, which shouldn’t be constructed, and which authors should not be able to define subclasses for.
The Event
class, and all its derived interfaces, are constructible.
This is useful when testing code which handles events:
an author can construct an Event
to pass to a method
which handles that type of event.
The Window
class isn’t constructible,
because creating a new window is a privileged operation
with significant side effects.
Instead, the window.open()
method
is used to create new windows.
The ImageBitmap
class isn’t constructible,
as it represents an immutable, ready-to-paint bitmap image,
and the process of getting it ready to paint must be done asynchronously.
Instead, the createImageBitmap()
factory method is used to create it.
The DOMTokenList
class is, sadly, not constructible.
This prevents the creation of custom elements that expose their token list attributes as DOMTokenList
s.
Navigator
, History
, or Crypto
,
are non-constructible because they are singletons
representing access to per-window information.
In these cases, something like the Web IDL namespace feature
might have been a better fit,
but these features were designed before namespaces,
and go beyond what is currently possible with namespaces.
If your API requires this type of singleton, consider using a namespace, and File an issue on Web IDL if there is some problem with using them.
Factory methods can complement constructors, but generally should not be used instead of them. It may still be valuable to include factory methods in addition to constructors, when they provide additional benefits. A common such case is when an API includes base classes and multiple specialized subclasses, with a factory method for creating the appropriate subclass based on the parameters passed. Often the factory method is a static method on the closest common base subclass of the returned result.
createElement
method is an example of a
factory method that could not have been implemented as a constructor,
as its result can be any of a number of subclasses of Element
. MouseEvent.initMouseEvent()
factory method only creates MouseEvent
objects,
which were originally not constructible,
even though there was no technical reason against that.
Eventually it was deprecated, and the MouseEvent
object was simply made constructible. 6.9. Be synchronous when appropriate
Where possible, prefer synchronous APIs when designing a new API.
Synchronous APIs are simpler to use,
and need less infrastructure set-up (such as making functions async
).
An API should generally be synchronous if the following rules of thumb apply:
-
The API is not expected to ever be gated behind a permission prompt, or another dialog such as a device selector.
-
The API implementation will not be blocked by a lock, filesystem or network access, for example, inter-process communication.
-
The execution time is short and deterministic.
6.10. Design asynchronous APIs using Promises
If an API method needs to be asynchronous, use Promises, not callback functions.
Using Promises consistently across the web platform means that APIs are easier to use together, such as by chaining promises. Promise-using code also tends to be easier to understand than code using callback functions.
An API might need to be asynchronous if:
-
the user agent needs to prompt the user for permission,
-
some information might need to be read from disk, or requested from the network,
-
the user agent may need to do a significant amount of work on another thread, or in another process, before returning the result.
See also:
6.11. Cancel asynchronous APIs/operations using AbortSignal
If an asynchronous method can be cancelled,
allow authors to pass in an AbortSignal
as part of an options dictionary.
const controller= new AbortController(); const signal= controller. signal; geolocation. read({ signal});
Using AbortSignal
consistently
as the way to cancel an asychronous operation
means that authors can write less complex code.
For example, there’s a pattern of using a single AbortSignal
for several ongoing operations,
and then using the corresponding AbortController
to cancel all of the operations at once if necessary
(such as if the user presses "cancel",
or a single-page app navigation occurs.)
Even if cancellation can’t be guaranteed,
you can still use an AbortController
,
because a call to abort()
on AbortController
is a request, rather than a guarantee.
6.12. Use strings for constants and enums
If your API needs a constant, or a set of enumerated values, use string values.
Strings are easier for developers to inspect, and in JavaScript engines there is no performance benefit from using integers instead of strings.
If you need to express a state which is a combination of properties, which might be expressed as a bitmask in another language, use a dictionary object instead. This object can be passed around as easily as a single bitmask value.
6.13. If you need both asynchronous and synchronous methods, synchronous is the exception
In the rare case where you need to have both synchronous and asynchronous methods for the same purpose, default to asynchronous and make synchronous the exception.
Due to current limitations, some specific areas of the web platform lack asynchronous support. Therefore having support for synchronous methods in addition to asynchronous methods can be beneficial for usability. Consider these cases an exception, and have a clear path for deprecation of the synchronous methods as web platform capabilities evolve.
For most cases, the synchronous variant
should be distinguished by naming it
with a Sync()
suffix.
7. Event Design
7.1. Use promises for one time events
Follow the advice in the Writing Promise-Using Specifications guideline.
7.2. Events should fire before Promises resolve
If a Promise-based asynchronous algorithm dispatches events, it should dispatch them before the Promise resolves, rather than after.
This guarantees that once the Promise resolves, all effects of the algorithm have been applied. For example, if an author changes some state in reaction to an event which the Promise dispatches, they can be sure that all of the state is consistent if the Promise is resolved.
7.3. Don’t invent your own event listener-like infrastructure
When creating an API which allows authors to start and stop a process which generates notifications, use the existing event infrastructure to allow listening for the notifications. Create separate API controls to start/stop the underlying process.
startNotifications()
method
on the BluetoothRemoteGATTCharacteristic
global object,
which adds the object to the "active notification context set".
When the User Agent receives a notification from the Bluetooth device,
it fires an event at the BluetoothRemoteGATTCharacteristic
objects
in the active notification context set.
See:
7.4. Always add event handler attributes
If your API adds a new event type,
add a corresponding onyourevent
event handler IDL attribute to the interface of any EventHandler
which may handle the new event.
it’s important to continue to define event handler IDL attributes because:
-
they preserve consistency in the platform
-
they enable feature-detection for the supported events (see § 2.5 New features should be detectable)
For consistency, if the event needs to be handled by HTML and SVG elements,
add the event handler IDL attributes on the GlobalEventHandlers
interface mixin,
instead of directly on the relevant element interface(s).
Similarly, add event handler IDL attributes to WindowEventHandlers
rather than Window
.
7.5. Use events for notification
Events shouldn’t be used to trigger changes, only to deliver a notification that a change has already finished happening.
resize
is fired at the Window
object.
It’s not possible to stop the resize from happening by intercepting the event.
Nor is it possible to fire a constructed resize
event
to cause the window to change size.
The event can only notify the author that the resize has already happened.
7.6. Guard against potential recursion
If your API includes a long-running or complicated algorithm, prevent calling into the algorithm if it’s already running.
If an API method causes a long-running algorithm to begin, you should use events to notify user code of the progress of the algorithm. However, the user code which handles the event may call the same API method, causing the complex algorithm to run recursively. The same event may be fired again, causing the same event handler to be fired, and so on.
To prevent this, make sure that any "recursive" call into the API method simply returns immediately. This technique is "guarding" the algorithm.
AbortSignal
's add, remove and signal abort each begin with a check to see if the signal is aborted.
If the signal is aborted, the rest of the algorithm doesn’t run.
In this case, a lot of the important complexity is in the algorithms run during the signal abort steps. These steps iterate through a collection of algorithms which are managed by the add and remove methods.
For example, the ReadableStreamPipeTo definition adds an algorithm
into the AbortSignal
's set of algorithms to be run
when the signal abort steps are triggered,
by calling abort()
on the AbortController
associated with the signal.
This algorithm is likely to resolve promises causing code to run,
which may include attempting to call any of the methods on AbortSignal
.
Since signal abort involves iterating through the collection of algorithms,
it should not be possible to modify that collection while it’s running.
And since signal abort would have triggered the code which caused the recursive call back in to signal abort, it’s important to avoid running these steps again if the signal is already in the process of the signal abort steps, to avoid recursion.
Note: A caution about early termination: if the algorithm being terminated would go on to ensure some critical state consistency, be sure to also make the relevant adjustments in state before early termination of the algorithm. Not doing so can lead to inconsistent state and end-user-visible bugs when implemented as-specified.
Note: Be cautious about throwing exceptions in early termination. Keep in mind the scenario in which developers will be invoking the algorithm, and whether they would reasonably expect to handle an exception in this [perhaps rare] case. For example, will this be the only exception in the algorithm?
You won’t always be able to "guard" in this way. For example, an algorithm may have too many entry-points to reliably check all of them. If that’s the case, another option is to defer calling the author code to a later task or microtask. This avoids a stack of recursion, but can’t avoid the risk of an endless loop of follow-up tasks.
Deferring an event is often specified as "queue a task to fire an event...".
You should always defer events if the algorithm that triggers the event could be running on a different thread or process. In this case, deferral ensures the events can be processed on the correct task in the task queue.
Both the "guarding" and the "deferring" approach have trade-offs.
"Guarding" an algorithm guarantees:
-
at the time events are fired, there is no chance that the state may have changed between the guarded algorithm ending and the event firing.
-
events fired during the algorithm, such as events to notify user code of a state change made as part of the algorithm, can be fired immediately, notifying code of the change without needing to wait for the next task.
-
user code running in the event handler can observe relevant state directly on the instance object they were fired on, rather than needing to be given a copy of the relevant state with the event.
If the events are deferred instead:
-
there is no guarantee that they will be first in the task queue once the algorithm completes.
-
any other task may change the object’s state you should include any state relevant to the event with the deferred event.
-
This usually involves a new subclass of
Event
, with new attributes to hold the state.For example, the
ProgressEvent
addsloaded
,total
, etc. attributes to hold the state.
-
-
if different parts of an algorithm need to coordinate, you may need to define an explicit state machine (well-defined state transitions) to ensure that when a deferred event fires, the behavior of inspecting or changing state is well-defined.
For example, in [payment-request], the
PaymentRequest
's [[state]] internal slot explicitly tracks the object’s state through its well-defined transitions.-
These state transitions often use the guarding technique themselves, to ensure the state transitions happen appropriately.
For example, in [payment-request] note the guards used around the [[state]] internal slot, such as in the
show()
algorithm.
-
-
if the deferred event doesn’t need extra state, or a state machine, this probably means that the event is just signalling the completion of the algorithm. If this is true, the API should probably return a
Promise
instead of firing the event. See § 7.1 Use promises for one time events.
Note: events that expose the possibility of recursion as described in this section were sometimes called "synchronous events". This terminology is discouraged as it implies that it’s possible to dispatch an event asynchronously. All events are dispatched synchronously. What is more often implied by "asynchronous event" is to defer firing an event.
7.7. Use plain Event
s for state
Where possible, use a plain Event
with a specified type
,
and capture any state information in the target
object.
It’s usually not necessary to create new subclasses of Event
.
7.8. Use Events and Observers appropriately
In general, use EventTarget
and notification Event
s,
rather than an Observer pattern,
unless an EventTarget
can’t work well for your feature.
Using an EventTarget
ensures your feature benefits from
improvements to the shared base class,
such as the addition of the once
.
If using events causes problems, such as unavoidable recursion, consider using an Observer pattern instead.
MutationObserver
, Intersection Observer, Resize Observers,
and IndexedDB Observers are all examples of an Observer pattern.
MutationObserver
replaced the deprecated DOM Mutation Events after developers noticed that DOM Mutation Events
-
fire too often
-
don’t benefit from event propagation, which makes them too slow to be useful
-
cause recursion which is too difficult to guard against.
Mutation Observers:
-
can batch up mutations to be sent to observers after mutations have finished being applied;
-
don’t need to go through event capture and bubbling phases;
-
provide a richer API for expressing what mutations have occurred.
Note: Events can also batch up notifications, but DOM Mutation Events were not designed to do this. Events don’t always need to participate in event propagation, but events on DOM Nodes usually do.
The Observer pattern works like this:
-
Each instance of the Observer class is constructed with a callback, and optionally with some options to customize what should be observed.
-
Instances begin observing specific targets, using a method named
observe()
, which takes a reference to the target to be observed. The options to customize what should be observed may be provided here instead of to the constructor. The callback provided in the constructor is invoked when something interesting happens to those targets. -
Callbacks receive change records as arguments. These records contain the details about the interesting thing that happened. Multiple records can be delivered at once.
-
The author may stop observing by calling a method called
unobserve()
ordisconnect()
on the Observer instance. -
Optionally, a method may be provided to immediately return records for all observed-but-not-yet-delivered occurrences.
IntersectionObserver
may be used like this:
function checkElementStillVisible( element, observer) { delete element. visibleTimeout; // Process any observations which may still be on the task queue processChanges( observer. takeRecords()); if ( 'isVisible' in element) { delete element. isVisible; logAdImpressionToServer(); // Stop observing this element observer. unobserve( element); } } function processChanges( changes) { changes. forEach( function ( changeRecord) { var element= changeRecord. target; element. isVisible= isVisible( changeRecord. boundingClientRect, changeRecord. intersectionRect); if ( 'isVisible' in element) { // Element became visible element. visibleTimeout= setTimeout(() => { checkElementStillVisible( element, observer); }, 1000 ); } else { // Element became hidden if ( 'visibleTimeout' in element) { clearTimeout( element. visibleTimeout); delete element. visibleTimeout; } } }); } // Create IntersectionObserver with callback and options var observer= new IntersectionObserver( processChanges, { threshold: [ 0.5 ] }); // Begin observing "ad" element var ad= document. querySelector( '#ad' ); observer. observe( ad);
(Example code adapted from the IntersectionObserver
explainer.)
To use the Observer pattern, you need to define:
-
the new Observer object type,
-
an object type for observation options, and
-
an object type for the records to be observed.
The trade-off for this extra work is the following advantages:
-
Instances can be customized at observation time, or at creation time. The constructor for an
Observer
, or itsobserve()
method, can take options allowing authors to customize what is observed for each callback. This isn’t possible withaddEventListener()
. -
It’s easy to stop listening on multiple callbacks using the
disconnect()
orunobserve()
method on theObserver
object. -
You have the option to provide a method like
takeRecords()
, which immediately fetches the relevant data, instead of waiting for an event to fire. -
Because Observers are single-purpose, you don’t need to specify an event type.
Observer
s and EventTarget
s have these things in common:
-
Both can be customized at creation time.
-
Both can batch occurrences and deliver them at any time.
EventTarget
s don’t need to be synchronous; they can use microtask timing, idle timing, animation-frame timing, etc. You don’t need anObserver
to get special timing or batching. -
Neither
EventTarget
s norObserver
s need to participate in a DOM tree (bubbling/capture and cancellation). Most prominentEventTarget
s areNode
s in the DOM tree, but many other events are standalone; for example,IDBDatabase
andXMLHttpRequestEventTarget
. Even when usingNode
s, your events may be designed to be non-bubbling and non-cancelable.
IntersectionObserver
that’s an EventTarget
subclass:
const io= new ETIntersectionObserver( element, { root, rootMargin, threshold}); function listener( e) { for ( const changeof e. changes) { // ... } } io. addEventListener( "intersect" , listener); io. removeEventListener( "intersect" , listener);
Compared to the Observer
version:
-
it’s more difficult to observe multiple elements with the same options;
-
there is no way to request data immediately;
-
it’s more work to remove multiple event listeners for the same event;
-
the author has to provide a redundant
"intersect"
event type.
In common with the Observer
version:
-
it can still do batching;
-
it has the same timing (based on the JavaScript event queue);
-
authors can still customize what to listen for; and
-
events don’t go through capture or bubbling.
These aspects can be achieved with either design.
See also:
8. Web IDL, Types, and Units
8.1. Use numeric types appropriately
If an API you’re designing uses numbers, use one of the following [WEBIDL] numeric types, unless there is a specific reason not to:
unrestricted double
-
Any JavaScript number, including infinities and NaN
double
-
Any JavaScript number, excluding infinities and NaN
- [
EnforceRange
]long long
-
Any JavaScript number from -263 to 263, rounded to the nearest integer. If a number outside this range is given, the generated bindings will throw a
TypeError
. - [
EnforceRange
]unsigned long long
-
Any JavaScript number from 0 to 264, rounded to the nearest integer. If a number outside this range is given, the generated bindings will throw a
TypeError
.
JavaScript has only one numeric type, Number
:
IEEE 754 double-precision floating point, including ±0, ±Infinity, and NaN. [WEBIDL] numeric types represent
rules for modifying any JavaScript number
to belong to a subset with particular properties.
These rules are run when a number is passed to the interface defined in IDL,
whether a method or a property setter.
If you have extra rules which need to be applied to the number, you can specify those in your algorithm.
octet
(8 bits, in the range [0, 255]),
involves taking the modulo of the JavaScript number.
For example, to convert a JavaScript number value of 300
to an octet
,
the bindings will first compute 300 modulo 255,
so the resulting number will be 45,
which might be surprising.
Instead, you can use
[EnforceRange
] octet
to throw a TypeError
for values outside of the octet
range,
or [Clamp
] octet
to clamp values to the octet range (for example, converting 300 to 255).
This also works for the other shorter types, such as short
or long
.
bigint
should be used only when values greater than 253 or less than -253 are expected.
An API should not support both BigInt
and Number
simultaneously,
either by supporting both types via polymorphism,
or by adding separate, otherwise identical APIs which take BigInt
and Number
.
This risks losing precision through implicit conversions,
which defeats the purpose of BigInt
.
8.2. Represent strings appropriately
When designing a web platform feature which operates on strings,
use DOMString
unless you have a specific reason not to.
Most string operations don’t need
to interpret the code units inside of the string,
so DOMString
is the best choice.
In the specific cases explained below, it might be appropriate to use either USVString
or ByteString
instead. [INFRA] [WEBIDL]
USVString
is the Web IDL type that represents scalar value strings.
For strings whose most common algorithms operate on scalar values (such as percent-encoding),
or for operations which can’t handle surrogates in input
(such as APIs that pass strings through to native platform APIs), USVString
should be used.
Reflecting IDL attributes whose content attribute is defined to contain a URL (such as href
)
should use USVString
. [HTML]
ByteString
should only be used for representing
data from protocols like HTTP
which don’t distinguish between bytes and strings.
It isn’t a general-purpose string type.
If you need to represent a sequence of bytes
,
use Uint8Array
.
8.3. Use milliseconds for time measurement
If you are designing an API that accepts a time measurement, express the time measurement in milliseconds.
Even if seconds (or some other time unit) are more natural in the domain of an API, sticking with milliseconds ensures that APIs are interoperable with one another. This means that authors don’t need to convert values used in one API to be used in another API, or keep track of which time unit is needed where.
This convention began with setTimeout()
and the Date
API,
and has been used since then.
Note: high-resolution time is usually represented as fractional milliseconds using a floating point value, not as an integer value of a smaller time unit like nanoseconds.
8.4. Use the appropriate type to represent times and dates
When representing date-times on the platform, use the DOMHighResTimeStamp
type. DOMHighResTimeStamp
allows comparison of timestamps,
regardless of the user’s time settings.
DOMHighResTimeStamp
values represent
a time value in milliseconds.
See [HIGHRES-TIME] for more details.
Don’t use the JavaScript Date
class for representing
specific date-time values. Date
objects are mutable (may have their value changed),
and there is no way to make them immutable.
Date
must not be used,
see the following:
-
Frozen date objects? on es-discuss
-
Remove Date from Web IDL on the Web IDL Bugzilla
8.5. Use Error or DOMException for errors
Represent errors in web APIs as ECMAScript error objects (e.g., Error
)
or as DOMException
.
whether they are exceptions, promise rejection values, or properties.
9. OS and Device Wrapper APIs
New APIs are now being developed in the web platform for interacting with devices. For example, authors wish to be able to use the web to connect with their microphones and cameras, generic sensors (such as gyroscope and accelerometer), Bluetooth and USB-connected peripherals, automobiles, etc.
These can be functionality provided by the underlying operating system, or provided by a native third-party library to interact with a device. These are an abstraction which "wrap" the native functionality without introducing significant complexity, while securing the API surface to the browser. So, these are called wrapper APIs.
This section contains principles for consideration when designing APIs for devices.
9.1. Use care when exposing identifying information about devices
If you need to give web sites access to information about a device, use the guidelines below to decide what information to expose.
Firstly, think carefully about whether it is really necessary to expose identifying information about the device at all. Consider whether your user needs could be satisfied by a less powerful API.
Exposing the presence of a device, additional information about a device, or device identifiers, each increase the risk of harming the user’s privacy.
One risk is that as more specific information is shared, the set of fingerprinting data available to sites gets larger. There are also other potential risks to user privacy.
Privacy Threat Model is not ready for prime time.
If there is no way to design a less powerful API, use these guidelines when exposing device information:
- Limit information in the id
-
Include as little identifiable information as possible in device ids exposed to the web plaform. Identifiable information includes branding, make and model numbers, etc You can usually use a random number or a unique id instead. Make sure that your ids aren’t guessable, and aren’t re-used.
- Keep the user in control
-
When the user chooses to clear browsing data, make sure any stored device ids are cleared.
- Hide sensitive ids behind a user permission
-
If you can’t create a device id in an anonymous way, limit access to it. Make sure the user can provide meaningful consent to a Web page accessing this information.
- Tie ids to the same-origin model
-
Create distinct unique ids for the same physical device for each origin that has has access to it.
If the same device is requested more than once by the same origin, return the same id for it (unless the user has cleared their browsing data). This allows authors to avoid having several copies of the same device.
- Persistable when necessary
-
If a device id is time consuming to obtain, make sure authors can store an id generated in one session for use in a later session. You can do this by making sure that the procedure to generate the id consistently produces the same id for the same device, for each origin.
See also:
9.2. Use care when exposing APIs for selecting or enumerating devices
Look for ways to avoid enumerating devices. If you can’t avoid it, expose the least information possible.
If an API exposes the the existence, capabilities, or identifiers of more than one device, all of the risks in § 9.1 Use care when exposing identifying information about devices are multiplied by the number of devices. For the same reasons, consider whether your user needs could be satisfied by a less powerful API. [LEAST-POWER]
If the purpose of the API is to enable the user to select a device from the set of available devices of a particular kind, you may not need to expose a list to script at all. An API which invokes a User-Agent-provided device picker could suffice. Such an API:
-
keeps the user in control,
-
doesn’t expose any device information without the user’s consent,
-
doesn’t expose any fingerprinting data about the user’s environment by default, and
-
only exposes information about one device at a time.
When designing API which allows users to select a device, it may be necessary to also expose the fact that there are devices are available to be picked. This does expose one bit of fingerprinting data about the user’s environment to websites, so it isn’t quite as safe as an API which doesn’t have such a feature.
RemotePlayback
interface
doesn’t expose a list of available remote playback devices.
Instead, it allows the user to choose one device
from a device picker provided by the User Agent.
It does enable websites to detect whether or not any remote playback device is available, so the website can show or hide a control the user can use to show the device picker.
The trade-off is that by allowing websites this extra bit of information, the API lets authors make their user interface less confusing. They can choose to show a button to trigger the picker only if at least one device is available.
If you must expose a list of devices, try to expose the smallest subset that satisfies your user needs.
For example, an API which allows the website to request a filtered or constrained list of devices is one option to keep the number of devices smaller. However, if authors are allowed to make multiple requests with different constraints, they may still be able to access the full list.
Finally, if you must expose the full list of devices of a particular kind, please rigorously define the order in which devices will be listed. This can reduce interoperability issues, and helps to mitigate fingerprinting. (Sort order could reveal other information: see Mitigating Browser Fingerprinting in Web Specifications § 6.2 Standardization for more.)
Note: While APIs should not expose a full list of devices in an implementation-defined order, they may need to for web compatibility reasons.
9.3. Design based on user needs, not the underlying API or hardware
Expose new native capabilities being brought to the web based on user needs.
Avoid directly translating an existing native API to the web.
Instead, consider the functionality available from the native API, and the user needs it addresses, and design an API that meets those user needs, even if the implementation depends on the existing native API.
Be particularly careful about exposing the exact lifecycle and data structures of the underlying native APIs. When possible, consider flexibility for new hardware.
This means newly proposed APIs should be designed with careful consideration on how they are intended to be used rather than how the underlying hardware, device, or native API available today.
9.4. Be proactive about safety
When bringing native capabilities to the web platform, try to design defensively.
Bringing a native capability to the web platform comes with many implications. Users may not want websites to know that their computers have specific capabilities. Therefore, access to anything outside of the logical origin boundary should be permission gated.
For example, if a device can store state, and that state is readable at the same time by multiple origins, a set of APIs that lets you read and write that state is effectively a side-channel that undermines the origin model of the web.
For these reasons, even if the device allows non-exclusive access, you may want to consider enforcing exclusive access per-origin, or even restricting it further to only the current active tab.
Additionally, APIs should be designed so that the applications can gracefully handle physical disruption, such as a device being unplugged.
9.5. Adapt native APIs using web platform principles
When adapting native operating system APIs for the web, make sure the new web APIs are designed with web platform principles in mind.
- Make sure the web API can be implemented on more than one platform
-
When designing a wrapper API, consider how different platforms provide its functionality.
Ideally, all implementations should work exactly the same, but in some cases you may have a reason to expose options which only work on some platforms. If this happens, be sure to explain how authors should write code which works on all platforms. See § 2.5 New features should be detectable.
- Underlying protocols should be open
-
APIs which require exchange with external hardware or services should not depend on closed or proprietary protocols. Depending on non-open protocols undermines the open nature of the web.
- Design APIs to handle the user being off-line
-
If an API depends on some service which is provided by a remote server, make sure that the API functions well when the user can’t access the remote server for any reason.
- Avoid additional fingerprinting surfaces
-
Wrapper APIs can unintentionally expose the user to a wider fingerprinting surface. Please read the TAG’s finding on unsanctioned tracking for additional details.
10. Other API Design Considerations
10.1. Enable polyfills for new features
Polyfills can be hugely beneficial in helping to roll out new features to the web platform. The Technical Architecture Group finding on Polyfills and the Evolution of the Web offers guidance that should be considered in the development of new features, notably:
-
Being "polyfillable" isn’t essential but is beneficial
-
Polyfill development should be encouraged
10.2. Where possible APIs should be made available to dedicated workers
When exposing a feature, please consider whether it makes sense to expose the feature
to dedicated workers (via the DedicatedWorkerGlobalScope
interface).
Many features could work out of the box on dedicated workers and not enabling the feature there could limit the ability for users to run their code in a non-blocking manner.
Certain challenges can exist when trying to expose a feature to dedicated workers, especially if the feature requires user input by asking for permission, or showing a picker or selector. Even though this might discourage spec authors to support dedicated workers, we still recommend designing the feature with dedicated worker support in mind, in order to not add assumptions that will later make it unnecessarily hard to expose these APIs to dedicated workers.
10.2.1. Some APIs should only be exposed to dedicated workers
Developers prefer simple code to complex code. They are more likely to use an API in the simplest way the API allows.
It’s important to avoid adding features that block rendering. § 3.4 Avoid features that block rendering
If the easiest way to use an API is likely to result in render blocking or “jank,” the user experience will suffer. (This problem is even more pronounced on low-powered devices, which are more likely to be used by disadvantaged or marginalized users. Remember, the web is for all people.)
Therefore,
APIs which would often block the main thread if used as intended
should not be exposed on the Window
interface.
By restricting such APIs to the DedicatedWorkerGlobalScope
interface,
the “easy” path for web developers
is the path with the best experience for users.
ScriptProcessorNode
s were replaced by AudioWorklet
s
in the Web Audio API
because use of ScriptProcessorNode
from the main thread
frequently resulted in a poor user experience. [WebAudio]
10.3. Add new data formats properly
Always define a corresponding MIME type and extend existing APIs to support this type for any new data format.
There are cases when a new capability on the web involves adding a new data format. This can be an image, video, audio, or any other type of data that a browser is expected to ingest. New formats should have a standardized MIME type, which is strictly validated.
While legacy media formats do not always have strict enforcement for MIME types (and sometimes rely on peeking at headers, to workaround this), this is mostly for legacy compatibility reasons and should not be expected or implemented for new formats.
It is expected that spec authors also integrate the new format to existing APIs, so that they are safelisted in both ingress (e.g. decoding from a ReadableStream) and egress (e.g. encoding to a WriteableStream) points from a browser’s perspective.
For example. if you are to add an image format to the web platform, first add a new MIME type for the format. After this, you would naturally add a decoder (and presumably an encoder) for said image format to support decoding in HTMLImageElements. On top of this, you are also expected to add support to egress points such as HTMLCanvasElement.toBlob() and HTMLCanvasElement.toDataURL().
For legacy reasons browsers support MIME type sniffing, but we do not recommend extending the pattern matching algorithm, due to security implications, and instead recommend enforcing strict MIME types for newer formats.
New MIME types should have a specification and should be registered with the Internet Assigned Numbers Authority (IANA).
10.4. Conform new HTTP headers to standards
If you are defining a new HTTP header, its syntax mustn’t go against the HTTP specification.
If the new header must convey structured data, such as lists, dictionaries, or typed values like decimals, strings, or booleans, then the header should use the syntax defined in Structured Field Values for HTTP. This avoids consumers of the header having to write and maintain specific micro-parsers, or even worse, something that would break those existing parsers. If the new header requires data that can’t be represented by Structured Field Values, then either engage with IETF about extending the Structured Field Values syntax, or re-consider if an HTTP header is a right place to expose the data before inventing a new syntax. [RFC8941]
10.5. Extend existing manifest files rather than creating new ones
If your feature requires a manifest, investigate whether you can extend an existing manifest schema.
New web features should be self-contained and self-describing and ideally should not require an additional manifest file. Some of the existing manifest files include
-
Web App Manifest which contains features related to web applications.
-
Payment Method Manifest which is used for payment methods in the context of the web payment API
-
Publication Manifest which is used by some web publications working group standards
-
Origin Policy which is used to set security policies.
We encourage people to extend existing manifest files. Always try to get the changes into the original spec, or at least discuss the extension with the spec editors. Having this discussion is more likely to result in a better design and lead to something that better integrates with the platform.
When designing new keys and values for a manifest, make sure they are needed (that is, they enable well-thought-out use-cases). Also, please check if a similar key exists. If an existing key/value pair does more or less what is needed, work with the existing spec to extend it to your use-case if possible.
However, if your feature requires a complex set of metadata specific to a functional domain, the creation of a new manifest may be justified.
You may need to make a new manifest file if the domain of the manifest file is different from the existing manifest files. For example, if the fetch timing is different, or if the complexity of the manifest warrants it. Application metadata should be added to the Web App Manifest or be an extension of it. Manifests designated to be used for specific applications or which require interoperability with non-browsers may need to take a different approach. Payment Method Manifest, Publication Manifest, and Origin Policy are examples of these cases.
For example, if you have a single piece of metadata, even if the fetch timing is different than an existing manifest, it is probably best to use an existing manifest (or ideally design the feature in such a way that a manifest is not required). However, if your feature requires a complex set of metadata specific to a functional domain, the creation of a new manifest may be justified.
Note that in all cases, the naming conventions should be harmonized (see § 12 Naming principles).
Note: By principle, existing manifests use lowercase, underscore-delimited names. There have been times where it was useful to re-use dictionaries from a manifest in DOM APIs as well, which meant converting the names to camel-cased version. One such example is the image resource. For this reason, if a key can clearly be expressed as a single word, that is recommended.
10.6. Consider consumers when serializing
When adding or extending features that involve a parser or a serializer you should consider their effect on serialization. The following are constituencies of serialization results that must be considered:-
Users - because the result of serialization may be presented to the end user
-
Tools - which may rely on the output of serialization in a number of ways (for instance, to detect if the parser need to correct for errors in the input)
-
Web APIs - because serializations may be passed into other APIs of the web platform
Consider language specific expectations - for instance, in some languages, the presence or absence of whitespace may be significant. Languages may differ in the precision of floating point numbers they accept. The results of serialization:
-
Should match developer expectations (for instance, serializing CSS properties should not result in output that is very different from what a CSS author would have written)
-
Idempotence - the result of serializing the output of a parser should be something that, when parsed and serialized, produces itself.
-
Should not add to error accumulation - taking the serialized output of an API and feeding it back to the same API in a loop should result in the same internal state
10.7. Ensure features are developer-friendly
Any new feature should be developer-friendly. While it is hard to quantify friendliness, at least consider the following points.
While error text in exceptions should be generic, developer-oriented error messages (such as those from a developer console) must be meaningful. When a developer encounters an error, the message should be specific to that error case, and not overly generic.
Ideally, developer-oriented error messages should have enough information to guide the developer in pinpointing where the problem is.
Declarative features such as CSS, may require extra work in the implementation for debuggability. Defining this in the specification not only makes the feature more developer-friendly, it also ensures a consistent development experience for the users.
A good example where debuggability was defined as part of the specification is Web Animations.
10.8. Use the best crypto, and expect it to evolve
Use only cryptographic algorithms that have been impartially reviewed by security experts, and make sure your choice of algorithm is proven, and up-to-date. Not only do they become obsolete or insecure, cryptographic protocols and algorithms also evolve quickly.
10.9. Do not expose new information through Client Hints
When using Client Hints, don’t expose information that the web page does not already have access to.
Client hints are an important optimization, but cannot be the sole means by which information is exposed to sites. As it says in RFC 8942 §4.1 where client hints are defined:
Therefore, features relying on this document to define Client Hint headers MUST NOT provide new information that is otherwise not made available to the application by the user agent, such as existing request headers, HTML, CSS, or JavaScript.
If you are trying to add a new client hint that exposes information that is not available to the web page through other means, please pursue exposing this information through an API first.
11. Writing good specifications
This document mostly covers API design for the Web, but those who design APIs are hopefully also writing specifications for the APIs that they design.
11.1. Identify the audience of each requirement in your specification
Document both how authors should write good code using your API, and how implementers of your API should handle poorly-written code.
The web, especially in comparison to other platforms, is designed to be robust in accepting poorly-formed markup. This means that web pages which use older versions of web standards can still be viewed in newer user agents, and also that authors have a shallower learning curve.
To support this, web specification writers need to describe how to interpret poorly-formed markup, as well as well-formed markup.
Implementers need to be able to understand the "supported language", which is more complex than the "conforming language" which authors should be aiming to use.
<table>
element
explains how to process the contents of a <table>
element,
including cases where the contents do not conform
to the Content model. 11.2. Specify completely and avoid ambiguity
When specifying how a feature should work, make sure that there is enough information so that authors don’t have to write different code to work with different implementations.
If a specification isn’t specific enough, implementers might make different choices which force authors to write extra code to handle the differences.
Implementers shouldn’t need to check details of other implementations to avoid this situation. Instead, the specification should be complete and clear enough on its own.
Note: This doesn’t mean that implementations can’t render things differently, or show different user interfaces for things like permission prompts.
Note: Implementers should file bugs against specifications which don’t give them clear enough information to write the implementation.
11.2.1. Define algorithms clearly
Write algorithms in a way that is clear and concise.
The most common way to write algorithms is to write an explicit sequence of steps. This often looks like pseudo-code.
showModal()
method is described as a numbered sequence of steps
which clearly explains when to throw exceptions
and when to run algorithms defined in other parts of the HTML spec. When writing a sequence of steps, imagine that it is a piece of functional code.
-
Clearly specify the inputs and outputs, name the algorithm and the variables it uses well, and explicitly note the points in the algorithm where the algorithm may return a result or error.
-
As much as possible, avoid writing algorithms which have side effects.
Summarize the purpose of the algorithm before going into detail, so that readers can decide whether to read the steps or skip over them. For example take the following steps, which ensure that there is at most one pending X callback per top-level browsing context.
A plain sequence of steps is not always the best way to write an algorithm. For example, it might make sense to define or re-use a formal syntax or grammar to avoid repetition, or define specific states to be used in a state machine. When using extra constructs like these, the earlier advice still applies.
As much as possible, describe algorithms as closely as possible to how they would be implemented. This may make the spec harder to write, but it means that implementations don’t need to figure out how to translate what’s written in the specification to how it should actually be implemented. In particular, that may mean that different implementations make different decisions that may lead to later features being feasible in one implementation but not another.
CSS selectors are read and understood from left to right, but in practice are matched from right to left in implementations. This allows the most specific term to be matched or not matched quickly, avoiding unnecessary work. The CSS selector matching algorithm is written this way, instead of a hypothetical algorithm which would more closely match how CSS selectors are often read by CSS authors.
See also:
11.2.2. Use explicit flags for state
Instead of describing state with words, use explicit flags for state when writing algorithms.
Using explicit flags makes it clear whether or not the state changes in different error conditions, and makes it clear when the state described by the flags is reset.
11.3. Resolving tension between interoperability and implementability
Specifying a feature, like all engineering work, requires weighing tradeoffs and compromising.
Sometimes, despite the best efforts of all involved, we fail to find a way to interoperably specify a feature that every implementor agrees is implementable in their engine.
Choosing a way forward should be guided by what is best for the end user.
First, examine the nature of the implementability concerns. Perhaps the implementor identified potential end-user harm and decided that the feature should not be implemented. In this situation, it may be best to not specify the feature, and for any implementors who have shipped the feature to un-ship it. Keep in mind that un-shipping features may result in user and author confusion.
Sometimes the same API is implementable in every engine, but its behavior cannot be made to be fully interoperable. Whenever behavior differs between implementations, the end-user impact must be considered. One downside to this approach is that the difference in behavior is not feature detectable. On the other hand, if something changes in the future that enables all implementations to converge on the same behavior, sites will not need to be updated to take advantage of this.
Note: Authors may assume the behavior of the dominant implementation is correct and any other behavior is buggy, which may further entrench the dominant implementaiton.
The backdrop-filter property is known to have a number of visible behavior differences between implementations. At the present time, those working on it believe the benefits of sharing an API outweigh the interoperability costs of the differences.
If behavior differences are serious enough, and cannot be converged further, it may be preferable to specify different APIs, with each implementor going with the alternative that they are able to implement.
One risk of this approach comes about if implementations are eventually able to converge on the same behavior. In this case, multiple alternative APIs may need to be supported indefinitely, which can increase developer complexity and implementation maintenance costs.
Exposing two different APIs that are intended to address the same use cases forces authors to use feature detection to write different code for different browsers.
Note: There is a risk that authors may assume the API variant supported by the dominant implementation is the "correct" one, or they may simply be unaware of the API variants supported in implementations they do not use regularly, which may further entrench the dominant implementaiton.
If you do go this route, try to reduce the cost to authors by minimizing the differences between the APIs. It may be possible to design things such that the non-standard part is a small, isolated component of a larger, standardized framework.
[ENCRYPTED-MEDIA] and [payment-request] are both examples of specifications which minimize API differences by isolating a non-standard component (Content Decryption Modules and payment methods, respectively) from the rest of the (shared) API surface.
Groups sometimes choose to specify APIs knowing that some implementations are unwilling to implement it. Authors may use feature detection to only use APIs when they are available, and users may benefit where such features are supported and used. This is always a problematic outcome, though it is worst when there is only one willing implementor. Some standards venues have rules explicitly disallowing the standardization of features which only have a single interested implementor. Even if you are not operating in such a group, standardization of single-implementation features is strongly discouraged.
You may also find that none of these options is acceptable to your group. While the best path forward may be to choose not to specify the feature, there is the risk that some implementations may ship the feature as a nonstandard API.
11.4. Avoid monkey patching
A monkey patch layers new functionality on top of an existing specification in a way that extends, overrides, or otherwise modifies the existing specification’s behavior. Monkey patching is generally considered bad practice and should be avoided for the reasons listed below; but is sometimes unavoidable (see our guidance if you need to monkey patch).An example of monkey patching would be: specification A defines an internal algorithm part of its capability, then specification B overrides or modifies said algorithm with functionality directly, not using publicly defined extension points.
As such, monkey patching (wrongly!) presupposes that underlying functionality cannot, and will not, be changed. This can lead to several problems:
-
If the existing specification changes, the monkey patched text may no longer apply thus causing it to break or lead to confusion.
-
If several specifications monkey patch part of another spec, the order in which the patches are applied can lead to inconsistent behavior.
-
The existing specification authors may not be aware of the monkey patched text in your spec. This misses an opportunity to receive guidance on reaching consensus on a fix. Or worse, the behavior that is being patched is interrelated to so other issue or behavior, making the overall situation worse.
-
An implementer doing code maintenance may read underlying specification and inadvertently revert the monkey patched behavior assuming it is a bug.
Wikipedia also describes some additional pitfalls of monkey patching.
11.4.1. If you need to monkey patch
Sometimes monkey patching is unavoidable (e.g., early in the design phase of a new specification). If you find yourself needing to monkey patch an existing specification, make sure you:-
In your spec, clearly mark the monkey patch as a proposed change to another specification that is only temporarily in this specification, using language like:
-
Identify the place you want to change using a quote from its text or by linking to a defined term if you’re replacing that term’s whole definition. Include the current step numbers if you’re changing something that’s numbered, but remember that numbers aren’t sufficient by themselves because they change when other steps are added or removed. If you’re changing several places within a definition, it can be helpful to paste the entire definition into a
<blockquote>
and use<ins>
and<del>
to describe what’s changing.Before step 4.2 of HTTP fetch, "If request’s redirect mode is "follow", then set request’s service-workers mode to "none".", insert the following steps:
-
The first new step.
In terms of CSS2.1 block-level formatting [CSS2], the rules for “over-constrained” computations in CSS 2.1 § 10.3.3 Block-level, non-replaced elements in normal flow are ignored in favor of alignment as specified here and the used value of the margin properties are therefore not adjusted to correct for the over-constraint.
Append
optional USVString value
parameters to the definitions of
andURLSearchParams
.delete()
:URLSearchParams
.has()
partial interface URLSearchParams {undefined delete (USVString name ,optional USVString value );boolean has (USVString name ,optional USVString value ); };Modify the definition of font-size-adjust as follows:
Name: font-size-adjust Value: none | [ ex-height | cap-height | ch-width | ic-width | ic-height ]? [ from-font | <number> ] Initial: none Applies to: all elements and text Inherited: yes Percentages: N/A Computed value: a number or the keyword nonethe keyword none, or a pair of a metric keyword and a <number>Canonical order: per grammar Animation type: discrete if the keywords differ, otherwise by computed value type -
-
Keep monkey patches short. If you’re modifying an algorithm by adding more than a couple of steps, define a separate, self-contained algorithm in your specification, and have the monkey patch call the new algorithm.
-
If you’re replacing or adding steps in an algorithm, write the new steps so an editor can paste them verbatim into the upstream algorithm. This implies that control flow like "return" or "abort" will return or abort from the whole upstream algorithm, not just the monkey patched section.
-
Once your feature has been reviewed within your own community, and there seems to be consensus that it’s a good idea, file an issue against the existing specification that asks the upstream community to review your monkey patch. This community may suggest better ways to accomplish your goals. Take them seriously. They might also be able to tell you how to hook into an existing extension point or quickly create one so that you can remove your monkey patch sooner than you expected.
-
Update the
<p class="issue">
block mentioned above to point to the issue you filed against the upstream specification. -
When your work has enough support to merge into the upstream specification, work with that specification’s maintainers to do so.
-
Once the existing specification has integrated your monkey patch, remove the monkey patch from your specification.
Note that monkey patching is different from "modularization", which extends existing technology in a way that is self-contained and doesn’t cause side-effects to other underlying specifications (e.g., the CSS Modules). Modularization is considered a good practice.
It’s also usually ok to extend a specification using WebIDL’s partial interfaces, partial dictionaries, and so on. But even in those cases, it’s highly advisable to coordinate with the authors of the specification being extended.
12. Naming principles
Names take meaning from:
-
signposting (the name itself)
-
use (how people come to understand the name over time)
-
context (the object on the left-hand side, for example)
12.1. Use common words
API naming must be done in easily readable US English. Keep in mind that most web developers aren’t native English speakers. Whenever possible, names should be chosen that use common vocabulary a majority of English speakers are likely to understand when first encountering the name.
Value readability over brevity. Keep in mind, however, that sometimes the shorter name is the clearer one. For instance, it may be appropriate to use technical language or well-known terms of art in the specification where the API is defined.
For example,
the Fetch API’s Body
mixin’s json()
method
is named for the kind of object it returns.
JSON is a well-known term of art
among web developers likely to use the Fetch API.
It would harm comprehension
to name this API less directly connected to its return type. [FETCH]
12.2. Use ASCII names
Names must adhere to the local language restrictions, for example CSS ident rules etc. and should be in the ASCII range.
12.3. Consult others on naming
Consult widely on names in your APIs.
You may find good names or inspiration in surprising places.
-
What are similar APIs named on other platforms, or in popular libraries in various programming languages?
-
Ask end users and developers what they call things that your API works with or manipulates.
-
Look at other web platform specifications, and seek advice from others working in related areas of the platform.
-
Also, consult if the names used are inclusive.
Pay particular attention to advice you receive with clearly-stated rationale based on underlying principles.
Tantek Çelik extensively researched how to name the various pieces of a URL. The editors of the URL spec have relied on this research when editing that document. [URL]
Use Web consistent names
When choosing a name for feature or API that has exposure in other technology stacks, the preference should be towards the Web ecosystem naming convention rather than other communities.The NFC standard uses the term media
to refer to what the Web calls MIME type.
In such cases, the naming of features or API for the purposes of Web NFC must prefer
naming consistent with MIME type
.
Use Inclusive Language
Use inclusive language whenever possible.
For example, you should use blocklist and allowlist instead of blacklist and whitelist, and source and replica instead of master and slave.
If you need to refer to a generic persona, such as an author or user, use the generic pronoun "they", "their", etc. For example, "A user may wish to adjust their preferences".
12.4. Use future-proof names
Naming should be generic and future-proof whenever possible.
The name should not be directly associated with a brand or specific revision of the underlying technology whenever possible; technology becomes obsolete, and removing APIs from the web is difficult.
The Remote Playback API was not named after one of the pre-existing, proprietary systems it was inspired by (such as Chromecast or AirPlay). Instead, general terms that describe what the API does were chosen. [REMOTE-PLAYBACK]
The keydown
and keyup
KeyboardEvent
s were not named
for the specific hardware bus that keyboards used at the time.
Instead, generic names were chosen
that are as applicable to today’s Bluetooth and USB keyboards
as they were to PS/2 and ADB keyboards back then. [UIEVENTS]
12.5. Name things consistently
Naming schemes should aim for consistency, to avoid confusion.Sets of related names should agree with each other in:
-
part of speech - noun, verb, etc.
-
negation, for example all of the names in a set should either describe what is allowed or they should all describe what is denied
Boolean properties vs. boolean-returning methods
Boolean properties, options, or API arguments which are asking a question about
their argument should not be prefixed with is
, while methods
that serve the same purpose, given that it has no side effects, should be
prefixed with is
to be consistent with the rest of the platform.
Use casing rules consistent with existing APIs
Although they haven’t always been uniformly followed, through the history of web platform API design, the following rules have emerged:
Casing rule | Examples | |
---|---|---|
Methods and properties (Web IDL attributes, operations, and dictionary keys) | Camel case | createAttribute() compatMode
|
Classes and mixins (Web IDL interfaces) | Pascal case | NamedNodeMap NonElementParentNode
|
Initialisms in APIs | All caps, except when the first word in a method or property | HTMLCollection innerHTML bgColor
|
Repeated initialisms in APIs | Follow the same rule | HTMLHRElement RTCDTMFSender |
The abbreviation of "identity"/"identifier" | Id , except when the first word in a method or property
| getElementById() pointerId id
|
Enumeration values | Lowercase, dash-delimited | "no-referrer-when-downgrade"
|
Events | Lowercase, concatenated |
|
HTML elements and attributes | Lowercase, concatenated | figcaption maxlength |
JSON keys | Lowercase, underscore-delimited | short_name |
ismap
on img
elements is reflected as the isMap
property on HTMLImageElement
.
The rules for JSON keys are meant to apply to specific JSON file formats sent over HTTP or stored on disk, and don’t apply to the general notion of JavaScript object keys.
Repeated initialisms are particularly non-uniform throughout the platform. Infamous historical
examples that violate the above rules are XMLHttpRequest
and HTMLHtmlElement
. Don’t follow their example; instead always capitalize your
initialisms, even if they are repeated.
Start factory method names with create
or from
Factory method names should start with create
or from
, optionally followed by a more specific noun.
If a factory method constructs a new empty object,
prefix the method name with create
.
However, if your factory method creates an object from existing data,
prefix the method name with from
.
Factory methods should be an exception, not the norm, and only used for valid reasons.
An example of valid usage of a factory method is
when an object is being created also requires association
with the parent object
(e.g. document.createXXX()
).
Use the prefix from
when there is a source object expected to be
converted to a target object.
For example, Foo.fromBar()
would imply
that a Foo
object will be created using a Bar
object.
A common pattern is to name generic factory methods create()
or from()
.
Avoid inventing other prefixes
and using of legacy prefixes
unless there is a strong reason to do so.
A reason to make an exception would be to maintain consistency with
existing factory methods
under the same object, such as document.initXXX()
.
New factory methods should not follow this convention.
12.6. Warn about dangerous features
Where possible, mark features that weaken the guarantees provided to developers by making their names start with "unsafe" so that this is more noticeable.
For example, Content Security Policy (CSP) provides protection against certain types of content injection vulnerabilities.
CSP also provides features that weaken this guarantee,
such as the unsafe-inline
keyword,
which reduces CSP’s own protections by allowing inline scripts.
13. Other resources
Some useful advice on how to write specifications is available elsewhere:
-
Writing specifications: Kinds of statements (Ian Hickson, 2006)
-
QA Framework: Specification Guidelines (W3C QA Working Group, 2005)
Acknowledgments
This document consists of principles which have been collected by TAG members past and present during TAG design reviews. We are indebted to everyone who has requested a design review from us.
The TAG would like to thank Adrian Hope-Bailie, Alan Stearns, Aleksandar Totic, Alex Russell, Andreas Stöckel, Andrew Betts, Anne van Kesteren, Benjamin C. Wiley Sittler, Boris Zbarsky, Brian Kardell, Charles McCathieNevile, Chris Wilson, Dan Connolly, Daniel Ehrenberg, Daniel Murphy, Domenic Denicola, Eiji Kitamura, Eric Shepherd, Ethan Resnick, fantasai, François Daoust, Henri Sivonen, HE Shi-Jun, Ian Hickson, Irene Knapp, Jake Archibald, Jeffrey Yasskin, Jeremy Roman, Jirka Kosek, Kevin Marks, Lachlan Hunt, Léonie Watson, L. Le Meur, Lukasz Olejnik, Maciej Stachowiak, Marcos Cáceres, Mark Nottingham, Martin Thomson, Matt Giuca, Matt Wolenetz, Michael[tm] Smith, Mike West, Nick Doty, Nigel Megitt, Nik Thierry, Ojan Vafai, Olli Pettay, Pete Snyder, Philip Jägenstedt, Philip Taylor, Reilly Grant, Richard Ishida, Rick Byers, Ryan Sleevi, Sergey Konstantinov, Stefan Zager, Stephen Stewart, Steven Faulkner, Surma, Tab Atkins-Bittner, Tantek Çelik, Tobie Langel, Travis Leithead, and Yoav Weiss for their contributions to this & the HTML Design Principles document which preceded it.
Special thanks to Anne van Kesteren and Maciej Stachowiak, who edited the HTML Design Principles document.
If you contributed to this document but your name is not listed above, please let the editors know so they can correct this omission.