W3C

Web Services Description Language (WSDL) Version 1.2: Bindings

W3C Working Draft 24 January 2003

This version:
http://www.w3.org/TR/2003/WD-wsdl12-bindings-20030124
Latest version:
http://www.w3.org/TR/wsdl12-bindings
Previous versions:
http://www.w3.org/TR/2002/WD-wsdl12-bindings-20020709
Editors:
Jean-Jacques Moreau, Canon
Jeffrey Schlimmer, Microsoft

This document is also available in these non-normative formats: postscript, PDF, XML, and  plain text.


Abstract

WSDL is an XML format for describing network services as a set of endpoints operating on messages containing either document-oriented or procedure-oriented information. WSDL Version 1.2 Bindings describes how to use WSDL in conjunction with SOAP 1.2 [SOAP 1.2 Part 1: Messaging Framework], HTTP/1.1 GET/POST [IETF RFC 2616], and MIME [IETF RFC 2045]. This specification depends on WSDL Version 1.2 [WSDL 1.2].

Status of this Document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. The latest status of this document series is maintained at the W3C.

This is a W3C Working Draft of the WSDL Version 1.2 Bindings specification for review by W3C members and other interested parties.

This document has been produced as part of the W3C Web Services Activity. The authors of this document are the Web Services Description Working Group members.

This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to use W3C Working Drafts as reference material or to cite them as other than "work in progress". This is work in progress and does not imply endorsement by, or the consensus of, either W3C or members of the Web Services Description Working Group.

For a detailed list of changes since the last publication of this document, refer to appendix B. Part 2 Change Log.

Comments on this document are invited and are to be sent to public-ws-desc-comments@w3.org (public archive). It is inappropriate to send discussion emails to this address. Discussion of this document takes place on the public www-ws-desc@w3.org mailing list (public archive).

Patent disclosures relevant to this specification may be found on the Working Group's patent disclosure page.

A list of current W3C Recommendations and other technical documents can be found at http://www.w3.org/TR.


Short Table of Contents

1. Introduction
2. SOAP Binding
3. HTTP GET and POST Binding
4. MIME Binding
5. References
A. Acknowledgements (Non-Normative)
B. Part 2 Change Log (Non-Normative)


Table of Contents

1. Introduction
    1.1 Notational Conventions
2. SOAP Binding
    2.1 Pseudo Schema (Non-Normative)
    2.2 binding Element with binding [parent]
        2.2.1 transportAttribute with binding [owner]
        2.2.2 styleDefault Attribute with binding [owner]
        2.2.3 namespaceDefault Attribute with binding [owner]
        2.2.4 encodingStyleDefault Attribute with binding [owner]
    2.3 module Element with binding [parent]
        2.3.1 uri Attribute with module [owner]
        2.3.2 required Attribute with binding [owner]
    2.4 propertyConstraint Element with module [parent]
        2.4.1 uri Attribute with propertyConstraint [owner]
        2.4.2 type Attribute with propertyConstraint [owner]
    2.5 operation Element with operation [parent]
        2.5.1 style Attribute with operation [owner]
        2.5.2 soapAction Attribute with operation [owner]
    2.6 body Element with input or output [parent]
        2.6.1 namespace Attribute with body [owner]
        2.6.2 encodingStyle Attribute with body [owner]
    2.7 header Element with input or output [parent]
        2.7.1 element Attribute with header [owner]
        2.7.2 type Attribute with header [owner]
        2.7.3 localname Attribute with header [owner]
        2.7.4 namespace Attribute with header [owner]
        2.7.5 encodingStyle Attribute with header [owner]
        2.7.6 role Attribute with header [owner]
    2.8 headerfault Element with input or output [parent]
    2.9 fault Element with operation [parent]
    2.10 address Element with port [parent]
        2.10.1 location Attribute with address [owner]
3. HTTP GET and POST Binding
    3.1 HTTP GET/POST Examples
    3.2 How the HTTP GET/POST Binding Extends WSDL
    3.3 http:address
    3.4 http:binding
    3.5 http:operation
    3.6 http:urlEncoded
    3.7 http:urlReplacement
4. MIME Binding
    4.1 MIME Binding example
    4.2 How the MIME Binding extends WSDL
    4.3 mime:content
    4.4 mime:multipartRelated
    4.5 soap:body
    4.6 mime:mimeXml
5. References
    5.1 Normative References
    5.2 Informative References

Appendices

A. Acknowledgements (Non-Normative)
B. Part 2 Change Log (Non-Normative)
    B.1 WSDL Specification Changes
    B.2 XML Schema Changes


1. Introduction

The Web Services Description Language WSDL Version 1.2 (WSDL) [WSDL 1.2] defines an XML grammar [XML 1.0] for describing network services as collections of communication endpoints capable of exchanging messages. WSDL service definitions provide documentation for distributed systems and serve as a recipe for automating the details involved in applications communication. WSDL 1.2 Bindings (this document) defines binding extensions for the following protocols and message formats:

WSDL 1.2 Primer [WSDL 1.2 Primer] is a non-normative document intended to provide an easily understandable tutorial on the features of the WSDL Version 1.2 specifications.

WSDL 1.2 [WSDL 1.2] of the WSDL specification describes the core elements of the WSDL language.

1.1 Notational Conventions

The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119 [IETF RFC 2119].

This specification uses a number of namespace prefixes throughout; they are listed in Table 1. Note that the choice of any namespace prefix is arbitrary and not semantically significant (see [XML Information Set]).

Table 1: Prefixes and Namespaces used in this specification
Prefix Namespace Notes
wsdl "http://www.w3.org/2003/01/wsdl" A normative XML Schema [XML Schema Structures], [XML Schema Datatypes] document for the "http://www.w3.org/2003/01/wsdl" namespace can be found at http://www.w3.org/2003/01/wsdl.
soap "http://www.w3.org/2003/01/wsdl/soap12" A normative XML Schema [XML Schema Structures], [XML Schema Datatypes] document for the "http://www.w3.org/2003/01/wsdl/soap12" namespace can be found at http://www.w3.org/2003/01/wsdl/soap12.
http "http://www.w3.org/2003/01/wsdl/http" A normative XML Schema [XML Schema Structures], [XML Schema Datatypes] document for the "http://www.w3.org/2003/01/wsdl/http" namespace can be found at http://www.w3.org/2003/01/wsdl/http.
mime "http://www.w3.org/2003/01/wsdl/mime" A normative XML Schema [XML Schema Structures], [XML Schema Datatypes] document for the "http://www.w3.org/2003/01/wsdl/mime" namespace can be found at http://www.w3.org/2003/01/wsdl/mime.
xsd "http://www.w3.org/2001/XMLSchema" Defined in the W3C XML Schema specification [XML Schema Structures], [XML Schema Datatypes].
xsi "http://www.w3.org/2001/XMLSchema-instance" Defined in the W3C XML Schema specification [XML Schema Structures], [XML Schema Datatypes].

Namespace names of the general form "http://example.org/..." and "http://example.com/..." represent application or context-dependent URIs [IETF RFC 2396].

This specification uses the Extended Backus-Naur Form (EBNF) as described in XML 1.0 [XML 1.0].

With the exception of examples and sections explicitly marked as "Non-Normative", all parts of this specification are normative.

2. SOAP Binding

Editorial note: JCS 20030115
The WG is actively redesigning the SOAP / HTTP binding to align with changes in SOAP 1.2.
Editorial note: JCS 20030115
This section is not fully converted to a component model compatible with Part 1.

WSDL includes a binding for SOAP 1.2 endpoints, which supports the specification of the following protocol specific information:

This binding grammar is not an exhaustive specification since the set of SOAP bindings is evolving. Nothing precludes additional SOAP bindings to be derived from portions of this grammar. For example:

2.1 Pseudo Schema (Non-Normative)

The WSDL SOAP binding described in this section extends WSDL[WSDL 1.2] by adding element information items and attribute information items to the Infoset of the WSDL binding element information item in the "http://www.w3.org/2003/01/wsdl" namespace. The following pseudo schema depicts each of these extensions.

<definitions ...>
  <binding ...>
   <soap:binding transport="uri" 
                  styleDefault="document|rpc"?
                  namespaceDefault="uri"? 
                  encodingStyleDefault="uri"? />
   <soap:module uri="uri"
                 required="boolean"? >
      <soap:propertyConstraint uri="uri"
                               type="qname"? />*
    </soap:module>*
    <operation ...>
     <soap:operation style="document|rpc"? 
                      soapAction="uri"? /> ?
      <input>
       <soap:body namespace="uri"?
                   encodingStyle="uri"? /> ?
       <soap:header element="qname"?
                     type="qname"?
                     localname="nmtoken"?
                     namespace="uri"?
                     encodingStyle="uri"?
                     role="uri"? />*
       <soap:headerfault message="qname"
                          part="nmtoken"
                          namespace="uri"?
                          encodingStyle="uri"? />*
      </input>?
      <output>
       // same as input
      </output>?
      <fault>
       <soap:fault name="nmtoken"
                    namespace="uri"?
                    encodingStyle="uri"? />
      </fault>*
    </operation>*
  </binding>

  <service ...>
    <port ...>
     <soap:address location="uri" /> 
    </port>
  </service>
</definitions>

2.2 binding Element with binding [parent]

The mandatory binding element information item indicates that messages are SOAP Envelopes [SOAP 1.2 Part 1: Messaging Framework].

The binding element information item has the following Infoset properties:

  • A [local name] of binding

  • A [namespace name] of "http://www.w3.org/2003/01/wsdl/soap12"

  • A [parent] of binding in the namespace named "http://www.w3.org/2003/01/wsdl"

  • One or more attribute information items amongst its [attributes] as follows:

    • A required transport attribute information item as described below

    • An optional styleDefault attribute information item as described below

    • An optional namespaceDefault attribute information item as described below

    • An optional encodingStyleDefault attribute information item as described below

The binding element information item has no [children].

2.2.1 transport Attribute with binding [owner]

The transport attribute information item indicates which underlying transport to use for SOAP Envelopes within a binding element information item. The transport attribute information item has the following Infoset properties:

  • A [local name] of transport

  • A [namespace name] which has no value

  • An [owner] of binding in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the transport attribute information item is xsd:anyURI. The value of the transport attribute information item is a URI that identifies a specific transport to carry SOAP Envelopes. The URI value "http://www.w3.org/2002/12/soap/bindings/HTTP/" corresponds to the HTTP binding in the SOAP specification.

2.2.2 styleDefault Attribute with binding [owner]

The styleDefault attribute information item indicates the default serialization style for all operations contained within the [ancestor] binding. The styleDefault attribute information item has the following Infoset properties:

  • A [local name] of styleDefault

  • A [namespace name] which has no value

  • An [owner] of binding in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the styleDefault attribute information item is xsd:string. The value of the styleDefault attribute information item is either "document" or "rpc"; if the styleDefault attribute information item is omitted, the value is "document". See below for more information on the semantics of the style attribute information item.

2.2.3 namespaceDefault Attribute with binding [owner]

The namespaceDefault attribute information item indicates the default namespace to use for any operation contained within the [ancestor] binding with style attribute information item with value "rpc". The namespaceDefault attribute information item has the following Infoset properties:

  • A [local name] of namespaceDefault

  • A [namespace name] which has no value

  • An [owner] of binding in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the namespaceDefault attribute information item is xsd:anyURI. The value of the namespaceDefault attribute information item is the XML namespace to use for the 'wrapper' element for the SOAP Envelope body block(s). See below for more information on the semantics of the namespace attribute information item.

2.2.4 encodingStyleDefault Attribute with binding [owner]

The encodingStyleDefault attribute information item indicates the default encodingStyle to use for any operation contained within the [ancestor] binding. The encodingStyleDefault attribute information item has the following Infoset properties:

  • A [local name] of encodingStyleDefault

  • A [namespace name] which has no value

  • An [owner] of binding in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the encodingStyleDefault attribute information item is xsd:anyURI.

The encodingStyle and encodingStyleDefault attribute information items indicate how the type description for the SOAP Envelope component was derived. This information MAY be exploited by tools that generate data structures from the type description.

The [normalized value] "http://www.w3.org/2002/12/soap-envelope/encoding/none" indicates that the type description was not derived as a function of a well-known encoding. The [normalized value] MUST NOT be "". If no encodingStyleDefault is in scope, then the [normalized value] is "http://www.w3.org/2002/12/soap-envelope/encoding/none"

For all [normalized value]s of the encodingStyle and encodingStyleDefault attribute information items, the SOAP Envelope component(s) MUST be exactly as described by the type description; the writer of the SOAP Envelope component(s) MUST it exactly as described by the type description.

2.3 module Element with binding [parent]

The optional module element information item indicates SOAP module(s) supported by a binding element information item. A SOAP module[SOAP 1.2 Part 1: Messaging Framework] realizes zero or more SOAP features implemented as one or more SOAP header blocks.

The module element information item has the following Infoset properties:

  • A [local name] of module

  • A [namespace name] of "http://www.w3.org/2003/01/wsdl/soap12"

  • A [parent] of binding in the namespace named "http://www.w3.org/2003/01/wsdl"

  • One or more attribute information items amongst its [attributes] as follows:

    • A required uri attribute information item as described below

    • An optional required attribute information item as described below

2.3.1 uri Attribute with module [owner]

The uri attribute information item specifies the URI of the SOAP module for the [owner] module . The uri attribute information item has the following Infoset properties:

  • A [local name] of uri

  • A [namespace name] which has no value

  • An [owner] of module in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the uri attribute information item is xsd:anyURI . The value of the uri attribute information item is a URI that identifies a specific SOAP module.

2.3.2 required Attribute with binding [owner]

The required attribute information item specifies whether the [owner] module is required by the [parent] binding. The required attribute information item has the following Infoset properties:

  • A [local name] of required

  • A [namespace name] which has no value

  • An [owner] of module in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the required attribute information item is xsd:boolean .

Omitting this attribute information item is defined as being semantically equivalent to including it with a value of "false".

2.4 propertyConstraint Element with module [parent]

The optional propertyConstraint element information item indicates SOAP module(s) supported by a module element information item.

The propertyConstraint element information item has the following Infoset properties:

  • A [local name] of propertyConstraint

  • A [namespace name] of "http://www.w3.org/2003/01/wsdl/soap12"

  • A [parent] of module in the namespace named "http://www.w3.org/2003/01/wsdl"

  • One or more attribute information items amongst its [attributes] as follows:

    • A required uri attribute information item as described below

    • An optional type attribute information item as described below

The value of the propertyConstraint element information item is the value that is required for the SOAP property of the [parent] module .

The propertyConstraint element information item has no [children].

2.4.1 uri Attribute with propertyConstraint [owner]

The uri attribute information item specifies the URI of the SOAP property for the [ancestor] module . The uri attribute information item has the following Infoset properties:

  • A [local name] of uri

  • A [namespace name] which has no value

  • An [owner] of propertyConstraint in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the uri attribute information item is xsd:anyURI . The value of the uri attribute information item is a URI that identifies a specific SOAP property for the [ancestor] module .

2.4.2 type Attribute with propertyConstraint [owner]

The type attribute information item specifies the type of the value of the [owner] propertyConstraint . The type attribute information item has the following Infoset properties:

  • A [local name] of type

  • A [namespace name] which has no value

  • An [owner] of propertyConstraint in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the type attribute information item is xsd:QName . The value of the type attribute information item is XML Qualified Name that identifies the type of the value for the [owner] propertyConstraint .

2.5 operation Element with operation [parent]

The optional operation element information item provides binding information for the [parent] operation. The operation element information item has the following Infoset properties:

  • A [local name] of operation

  • A [namespace name] of "http://www.w3.org/2003/01/wsdl/soap12"

  • A [parent] of operation in the namespace named "http://www.w3.org/2003/01/wsdl"

  • Zero or more attribute information items amongst its [attributes] as follows:

    • An optional style attribute information item as described below

    • An optional soapAction attribute information item as described below

The operation element information item has no [children].

If the operation element information item has no [attributes], it MAY be omitted.

2.5.1 style Attribute with operation [owner]

The style attribute information item indicates the serialization style of the operation owner. The style attribute information item has the following Infoset properties:

  • A [local name] of style

  • A [namespace name] which has no value

  • An [owner] of operation in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the style attribute information item is xsd:string.

The value of the style attribute information item indicates whether the [owner] operation is serialized according to a document-oriented style (message contains document(s)) or remote-procedure-call (RPC) oriented style (message contains parameter(s) and/or return value(s)). This information may be used to select an appropriate programming model. The value of this attribute information item also affects the way in which the Fault of the SOAP message is constructed, as explained in section 2.6 body Element with input or output [parent] . If the style attribute information item is not specified, it defaults to the value specified in the [ancestor] binding element information item in the namespace named "http://www.w3.org/2003/01/wsdl/soap12".

2.5.2 soapAction Attribute with operation [owner]

Editorial note: JCS 20030115
The SOAP 1.2 HTTP binding does not define a SOAPAction HTTP header. This is a known issue.

The soapAction attribute information item specifies the value of the HTTP SOAPAction header for the operation owner. The soapAction attribute information item has the following Infoset properties:

  • A [local name] of soapAction

  • A [namespace name] which has no value

  • An [owner] of operation in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the soapAction attribute information item is xsd:anyURI.

The value of the soapAction attribute information item is the URI to be included in the HTTP SOAPAction header for the [owner] operation. This URI value should be used directly as the value for the HTTP SOAPAction header; no attempt should be made to make a relative URI value absolute when making the request. For the HTTP protocol binding of SOAP, this value is required (it has no default value). For other SOAP protocol bindings, it MUST NOT be specified.

2.6 body Element with input or output [parent]

The optional body element information item specifies properties of the SOAP Envelope body block(s) for the [parent] operation. The body element information item has the following Infoset properties:

  • A [local name] of body

  • A [namespace name] of "http://www.w3.org/2003/01/wsdl/soap12"

  • A [parent] of input or output in the namespace named "http://www.w3.org/2003/01/wsdl"

  • Zero or more attribute information items amongst its [attributes] as follows:

    • An optional namespace attribute information item as described below

    • An optional encodingStyle attribute information item as described below

The body element information item has no [children].

If the body element information item has no [attributes], it MAY be omitted.

The body element information item provides information on how to assemble the different message parts inside the Fault element of the SOAP Envelope. The body element information item is used in both RPC-oriented and document-oriented messages, but the style of the enclosing operation has important effects on how the Fault section is structured:

  • If the operation style is rpc each part is a parameter or a return value and appears inside a wrapper element within the body. The wrapper element is named identically to the operation name and its namespace is the value of the namespace attribute. Each message part (parameter) appears under the wrapper, represented by an accessor named identically to the corresponding parameter of the call. Parts are arranged in the same order as the parameters of the call.

  • If the operation style is document there are no additional wrappers, and the message parts appear directly under the SOAP Fault element.

The same mechanisms are used to define the content of the Fault and parameter accessor elements.

Each part references a concrete schema definition using either the element or type attribute information item. In the first case, the element referenced by the part will appear directly under the Body SOAP Envelope element (for document style bindings) or under an accessor element named after the message part (in rpc style). In the second, the type referenced by the part becomes the schema type of the enclosing element (Body for document style or part accessor element for rpc style).

2.6.1 namespace Attribute with body [owner]

The namespace attribute information item defines the XML namespace to use for the SOAP body block(s) for the [ancestor] operation . The namespace attribute information item has the following Infoset properties:

  • A [local name] of namespace

  • A [namespace name] which has no value

  • An [owner] of body in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the namespace attribute information item is xsd:anyURI. The value of the namespace attribute information item is the XML namespace to use for the 'wrapper' element for the SOAP Envelope body block(s).

If the value of the style attribute information item is "document", then the namespace attribute information item with [owner] body is not applicable.

2.6.2 encodingStyle Attribute with body [owner]

The encodingStyle attribute information item indicates the encoding style

that was used to generate type description for the SOAP body block(s) for the [ancestor] operation .

The encodingStyle attribute information item has the following Infoset properties:

  • A [local name] of encodingStyle

  • A [namespace name] which has no value

  • An [owner] of body in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the encodingStyle attribute information item is xsd:anyURI.

The [normalized value] "http://www.w3.org/2002/12/soap-envelope/encoding/none" indicates that the type description has not been derived as a function of a well-known encoding. The [normalized value] MUST NOT be "". If no encodingStyle is in scope, then the [normalized value] is the encodingStyleDefault attribute information item.

2.7 header Element with input or output [parent]

The optional header element information item specifies SOAP header block(s) for the [ancestor] operation. The header element information item has the following Infoset properties:

  • A [local name] of header

  • A [namespace name] of "http://www.w3.org/2003/01/wsdl/soap12"

  • A [parent] of input or output in the namespace named "http://www.w3.org/2003/01/wsdl"

  • One or more attribute information items amongst its [attributes] as follows:

    • An optional element attribute information item as described below

    • An optional type attribute information item as described below

    • An optional localname attribute information item as described below

    • An optional namespace attribute information item as described below

    • An optional encodingStyle attribute information item as described below

    • An optional role attribute information item as described below

The header element information item has no [children].

The header element information item allow headers to be defined that are transmitted as SOAP header blocks. It is not necessary to exhaustively list all header blocks that appear in the SOAP Envelope using header element information items. For example, extensions (see Language Extensibility and Binding, [WSDL 1.2], section 4) to WSDL may imply specific headers should be added to the actual payload, and it is not required to list those headers here.

Exactly one of the element and type attribute information items MUST be specified. The localname and namespace attribute information items MUST be specified if and only if the type attribute information item is specified.

2.7.1 element Attribute with header [owner]

The element attribute information item refers to an XML Schema element declaration component that defines the SOAP header block for the [owner] header . The element attribute information item has the following Infoset properties:

  • A [local name] of element

  • A [namespace name] which has no value

  • An [owner] of header in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the element attribute information item is xsd:QName.

2.7.2 type Attribute with header [owner]

The type attribute information item refers to an XML Schema type description that defines the SOAP header block for the [owner] header . The type attribute information item has the following Infoset properties:

  • A [local name] of type

  • A [namespace name] which has no value

  • An [owner] of header in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the type attribute information item is xsd:QName.

The namespace attribute information item is used in the same way as with the body element information item (see section 2.6 body Element with input or output [parent] ), only style ="document" is assumed since headers do not contain parameters.

The schema referenced MAY include definitions for the actor and mustUnderstand attribute information item in the namespace named "http://www.w3.org/2002/12/soap-envelope".

2.7.3 localname Attribute with header [owner]

The localname attribute information item defines the localname of the SOAP header block for the [owner] header when it has a type attribute information item. The localname attribute information item has the following Infoset properties:

  • A [local name] of localname

  • A [namespace name] which has no value

  • An [owner] of header in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the localname attribute information item is xsd:NCName.

2.7.4 namespace Attribute with header [owner]

The namespace attribute information item defines the XML namespace of the SOAP header block for the [owner] header when it has a type attribute information item. The namespace attribute information item has the following Infoset properties:

  • A [local name] of namespace

  • A [namespace name] which has no value

  • An [owner] of header in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the namespace attribute information item is xsd:anyURI.

2.7.5 encodingStyle Attribute with header [owner]

The encodingStyle attribute information item indicates the encoding style

that was used to generate type description for the SOAP header block(s) for the [ancestor] operation .

The encodingStyle attribute information item has the following Infoset properties:

  • A [local name] of encodingStyle

  • A [namespace name] which has no value

  • An [owner] of header in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the encodingStyle attribute information item is xsd:anyURI.

The [normalized value] "http://www.w3.org/2002/12/soap-envelope/encoding/none" indicates that the type description has not been derived as a function of a well-known encoding. The [normalized value] MUST NOT be "". If no encodingStyle is in scope, then the [normalized value] is the encodingStyleDefault attribute information item.

2.7.6 role Attribute with header [owner]

The optional role attribute information item identifies the SOAP role to which a SOAP header block is targeted. The role attribute information item has:

  • A [local name] of role

  • A [namespace name] which has no value

  • A [specified] property with a value of "true"

  • An [owner] of header in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the role attribute information item is xsd:anyURI . The value of the role attribute information item is a URI that names a role that a SOAP node can assume. It SHOULD NOT be a relative URI.

A role attribute information item that is either absent or has an empty value is equivalent to indicating a value of "http://www.w3.org/2002/12/soap-envelope/role/ultimateReceiver", i.e., targeting the SOAP header block to an ultimate SOAP receiver.

2.8 headerfault Element with input or output [parent]

Editorial note: JCS 20030115
When deciding to modify header, the WG did not formally decide to modify headerfault. This subsection has not been updated pending that consideration.

The soap:header and soap:headerfault elements allows header to be defined that are transmitted inside the Header element of the SOAP Envelope. It is patterned after the soap:body element (see section 2.6 body Element with input or output [parent] ).

It is not necessary to exhaustively list all headers that appear in the SOAP Envelope using soap:header . For example, extensions (see Language Extensibility and Binding, [WSDL 1.2], section 4) to WSDL may imply specific headers should be added to the actual payload and it is not required to list those headers here.

The namespace attribute is used in the same way as with soap:body (see section 2.6 body Element with input or output [parent] ), only style ="document" is assumed since headers do not contain parameters.

Together, the message attribute (of type QName ) and the part attribute (of type nmtoken ) reference the message part that defines the header type. The schema referenced by the part MAY include definitions for the soap:actor and soap:mustUnderstand attributes.

The referenced message need not be the same as the message that defines the SOAP Body .

The optional headerfault elements which appear inside soap:header and have the same syntax as soap:header allows specification of the header type(s) that are used to transmit error information pertaining to the header defined by the soap:header . The SOAP specification states that errors pertaining to headers must be returned in headers, and this mechanism allows specification of the format of such headers.

2.9 fault Element with operation [parent]

The soap:fault element specifies the contents of the SOAP Fault Details element. It is patterned after the soap:body element (see section 2.6 body Element with input or output [parent] ).

The name attribute relates the soap:fault to the wsdl:fault defined for the operation.

The fault message MUST have a single part. The namespace attribute is used in the same way as with soap:body (see section 2.6 body Element with input or output [parent] ), only style ="document" is assumed since faults do not contain parameters.

2.10 address Element with port [parent]

The mandatory address element information item contains the endpoint address of a port . The address element information item has the following Infoset properties:

  • A [local name] of address

  • A [namespace name] of "http://www.w3.org/2003/01/wsdl/soap12"

  • A [parent] of port in the namespace named "http://www.w3.org/2003/01/wsdl"

  • One attribute information item amongst its [attributes] as follows:

    • A required location attribute information item as described below



The address element information item has no [children].

2.10.1 location Attribute with address [owner]

The mandatory location attribute information item identifies the endpoint address of a port . The location attribute information item has the following Infoset properties:

  • A [local name] of location

  • A [namespace name] which has no value

  • An [owner] of address in the namespace named "http://www.w3.org/2003/01/wsdl/soap12"

The type of the location attribute information item is xsd:anyURI . The value of the location attribute information item is a URI that processes messages bound by the port . The URI scheme of the value of the location attribute information item MUST correspond to the transport specified by the value of the binding attribute information item of the port element information item.

3. HTTP GET and POST Binding

WSDL includes a binding for HTTP 1.1's GET and POST [IETF RFC 2616] verbs in order to describe the interaction between a Web Browser and a web site. This allows applications other than Web Browsers to interact with the site. The following protocol specific information may be specified:

3.1 HTTP GET/POST Examples

The following example shows three ports that are bound differently for a given port type.

If the values being passed are "part1=1", "part2=2", "part3=3", the request format would be as follows for each port:

port1: GET, URL="http://example.com/o1/A1B2/3"
port2: GET, URL="http://example.com/o1?p1=1&p2=2&p3=3
port3: POST, URL="http://example.com/o1", PAYLOAD="p1=1&p2=2&p3=3"

For each port, the response is either a GIF or a JPEG image.

Example 1: GET and FORM POST example returning GIF or JPG
<definitions .... >
    <message name="m1">
        <part name="part1" type="xsd:string"/>
        <part name="part2" type="xsd:int"/>
        <part name="part3" type="xsd:string"/>
    </message>

    <message name="m2">
        <part name="image" type="xsd:binary"/>
    </message>

    <portType name="pt1">
        <operation name="o1">
           <input message="tns:m1"/>
           <output message="tns:m2"/>
        </operation>
    </portType>

    <service name="service1">
        <port name="port1" binding="tns:b1">
           <http:address location="http://example.com/"/>
        </port>
        <port name="port2" binding="tns:b2">
           <http:address location="http://example.com/"/>
        </port>
        <port name="port3" binding="tns:b3">
             <http:address location="http://example.com/"/>
        </port>
    </service>

    <binding name="b1" type="pt1">
       <http:binding verb="GET"/>
        <operation name="o1">
          <http:operation location="o1/A(part1)B(part2)/(part3)"/>
           <input>
              <http:urlReplacement/>
           </input>
           <output>
              <mime:content type="image/gif"/>
              <mime:content type="image/jpeg"/>
           </output>
        </operation>
    </binding>

    <binding name="b2" type="pt1">
       <http:binding verb="GET"/>
        <operation name="o1">
          <http:operation location="o1"/>
          <input>
              <http:urlEncoded/>
          </input>
           <output>
              <mime:content type="image/gif"/>
              <mime:content type="image/jpeg"/>
           </output>
        </operation>
    </binding>

    <binding name="b3" type="pt1">
       <http:binding verb="POST"/>
        <operation name="o1">
          <http:operation location="o1"/>
           <input>
              <mime:content type="application/x-www-form-urlencoded"/>
           </input>
           <output>
              <mime:content type="image/gif"/>
              <mime:content type="image/jpeg"/>
           </output>
        </operation>
    </binding>
</definitions>

3.2 How the HTTP GET/POST Binding Extends WSDL

The HTTP GET/POST Binding extends WSDL with the following extension elements:

<definitions .... >
    <binding .... >
       <http:binding verb="nmtoken"/>
        <operation .... >
          <http:operation location="uri"/>
           <input .... >
              <-- mime elements -->
           </input>
           <output .... >
              <-- mime elements -->
           </output>
        </operation>
    </binding>

    <port .... >
       <http:address location="uri"/>
    </port>
</definitions>

These elements are covered in the subsequent sections.

3.3 http:address

The location attribute specifies the base URI for the port. The value of the attribute is combined with the values of the location attribute of the http:operation binding element. See section 3.5 http:operation for more details.

3.4 http:binding

The http:binding element indicates that this binding uses the HTTP protocol.

<definitions .... >
    <binding .... >
       <http:binding verb="nmtoken"/>
    </binding>
</definitions>

The value of the required verb attribute indicates the HTTP verb. Common values are GET or POST, but others may be used. Note that HTTP verbs are case sensitive.

3.5 http:operation

The location attribute specifies a relative URI for the operation. This URI is combined with the URI specified in the http:address element to form the full URI for the HTTP request. The URI value MUST be a relative URI.

<definitions .... >
    <binding .... >
        <operation .... >
          <http:operation location="uri"/>
        </operation>
    </binding>
</definitions>

3.6 http:urlEncoded

The urlEncoded element indicates that all the message parts are encoded into the HTTP request URI using the standard URI- encoding rules ("name1=value&name2=value…"). The names of the parameters correspond to the names of the message parts. Each value contributed by the part is encoded using a "name=value" pair. This may be used with GET to specify URL encoding, or with POST to specify a FORM-POST. For GET, the "?" character is automatically appended as necessary.

<http:urlEncoded/>

For more information on the rules for URI-encoding parameters, see Form submission ([HTML 4.01], section 17.13), Ampersands in URI ([HTML 4.01], section B.2.2), and Form content types ([HTML 4.01], section 17.13.4).

3.7 http:urlReplacement

The http:urlReplacement element indicates that all the message parts are encoded into the HTTP request URI using a replacement algorithm:

  • The relative URI value of http:operation is searched for a set of search patterns.

  • The search occurs before the value of the http:operation is combined with the value of the location attribute from http:address .

  • There is one search pattern for each message part. The search pattern string is the name of the message part surrounded with parenthesis "(" and ")".

  • For each match, the value of the corresponding message part is substituted for the match at the location of the match.

  • Matches are performed before any values are replaced (replaced values do not trigger additional matches).

Message parts MUST NOT have repeating values.

<http:urlReplacement/>

4. MIME Binding

WSDL includes a way to bind abstract types to concrete messages in some MIME format. Bindings for the following MIME types are defined:

The set of defined MIME types is both large and evolving, so it is not a goal for WSDL to exhaustively define XML grammar for each MIME type. Nothing precludes additional grammar to be added to define additional MIME types as necessary. If a MIME type string is sufficient to describe the content, the mime element defined below can be used.

4.1 MIME Binding example

Editorial note: JJM 20020301
The following examples are SOAP 1.1 examples, not SOAP 1.2 examples.

This example describes that a GetCompanyInfo SOAP request may be sent to a StockQuote service via the SOAP HTTP binding. The request takes a ticker symbol of type string. The response contains multiple parts encoded in the MIME format multipart/related: a SOAP Envelope containing the current stock price as a float, zero or more marketing literature documents in HTML format, and an optional company logo in either GIF or JPEG format.

Example 2: Using multipart/related with SOAP
<definitions .... >

    <types>
        <schema .... >
           <element name="GetCompanyInfo">
               <complexType>
                   <all>
                       <element name="tickerSymbol " type="string"/>
                   </all>
               </complexType>
           </element>
           <element name="GetCompanyInfoResult">
               <complexType>
                   <all>
                       <element name="result" type="float"/>
                   </all>
               </complexType>
           </element>
           <complexType name="ArrayOfBinary">
               <complexContent>
                   <restriction base="soapenc:Array">
                      <attribute ref="soapenc:arrayType" wsdl:arrayType="xsd:binary[]"/>
                   </restriction>
               <complexContent>
           </complexType>
        </schema>
    </types>

    <message name="m1">
        <part name="body" element="tns:GetCompanyInfo"/>
    </message>

    <message name="m2">
        <part name="body" element="tns:GetCompanyInfoResult"/>
        <part name="docs" type="xsd:string"/>
        <part name="logo" type="tns:ArrayOfBinary"/>
    </message>

    <portType name="pt1">
        <operation name="GetCompanyInfo">
           <input message="m1"/>
           <output message="m2"/>
        </operation>
    </portType>

    <binding name="b1" type="tns:pt1">
        <operation name="GetCompanyInfo">
          <soap:operation soapAction="http://example.com/GetCompanyInfo"/>
           <input>
              <soap:body use="literal"/>
           </input>
           <output>
              <mime:multipartRelated>
                  <mime:part>
                      <soap:body parts="body" use="literal"/>
                  </mime:part>
                  <mime:part>
                      <mime:content part="docs" type="text/html"/>
                  </mime:part>
                  <mime:part>
                      <mime:content part="logo" type="image/gif"/>
                      <mime:content part="logo" type="image/jpeg"/>
                  </mime:part>
              </mime:multipartRelated>
           </output>
        </operation>
    </binding>

    <service name="CompanyInfoService">
        <port name="CompanyInfoPort"binding="tns:b1">
          <soap:address location="http://example.com/companyinfo"/>
        </port>
    </service>
</definitions>

4.2 How the MIME Binding extends WSDL

The MIME Binding extends WSDL with the following extension elements:

<mime:content part="nmtoken"? type="string"?/>

<mime:multipartRelated>
    <mime:part> *
        <-- mime element -->
    </mime:part>
</mime:multipartRelated>
<mime:mimeXml part="nmtoken"?/>

They are used at the following locations in WSDL:

<definitions .... >
    <binding .... >
        <operation .... >
           <input .... >
              <-- mime elements -->
           </input>
           <output .... >
              <-- mime elements -->
           </output>
        </operation>
    </binding>
</definitions>

MIME elements appear under input and output to specify the MIME format. If multiple appear, they are considered to be alternatives.

4.3 mime:content

To avoid having to define a new element for every MIME format, the mime:content element may be used if there is no additional information to convey about the format other than its MIME type string.

<mime:content part="nmtoken"? type="string"?/>

The part attribute is used to specify the name of the message part. If the message has a single part, then the part attribute is optional. The type attribute contains the MIME type string. A type value has two portions, separated by a slash (/), either of which may be a wildcard (*). Not specifying the type attribute indicates that all MIME types are acceptable.

If the return format is XML [XML 1.0], but the schema is not known ahead of time, the generic mime element can be used indicating "text/xml" [IETF RFC 3023]:

<mime:content type="text/xml"/>

A wildcard (*) can be used to specify a family of mime types, for example all text types.

<mime:content type="text/*"/>

The following two examples both specify all mime types:

<mime:content type="*/*"/>
<mime:content/>

4.4 mime:multipartRelated

The "multipart/related" MIME type aggregates an arbitrary set of MIME formatted parts into one message using the MIME type "multipart/related". The mime:multipartRelated element describes the concrete format of such a message:

<mime:multipartRelated>
    <mime:part> *
        <-- mime element -->
    </mime:part>
</mime:multipartRelated>

The mime:part element describes each part of a "multipart/related" message [IETF RFC 2387]. MIME elements appear within mime:part to specify the concrete MIME type for the part. If more than one MIME element appears inside a mime:part , they are alternatives.

4.5 soap:body

When using the MIME binding with SOAP requests [SOAP 1.2 Part 1: Messaging Framework], it is legal to use the soap:body element as a MIME element. It indicates the content type is "text/xml", and there is an enclosing SOAP Envelope.

4.6 mime:mimeXml

To specify XML payloads that are not SOAP compliant (do not have a SOAP Envelope), but do have a particular schema, the mime:mimeXml element may be used to specify that concrete schema. The part attribute refers to a message part defining the concrete schema of the root XML element. The part attribute MAY be omitted if the message has only a single part. The part references a concrete schema using the element attribute for simple parts or type attribute for composite parts .

<mime:mimeXml part="nmtoken"?/>

5. References

5.1 Normative References

[HTML 4.01]
HTML 4.01 Specification, D. Raggett, A. Le Hors, I. Jacobs, Editors. World Wide Web Consortium, 24 December 1999. This version of the HTML 4.01 Recommendation is http://www.w3.org/TR/1999/REC-html401-19991224. The latest version of HTML 4.01 is available at http://www.w3.org/TR/html401.
[IETF RFC 2045]
Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies, N. Freed, N. Borenstein, Authors. Internet Engineering Task Force, November 1996. Available at http://www.ietf.org/rfc/rfc2045.txt.
[IETF RFC 2119]
Key words for use in RFCs to Indicate Requirement Levels, S. Bradner, Author. Internet Engineering Task Force, June 1999. Available at http://www.ietf.org/rfc/rfc2119.txt.
[IETF RFC 2387]
The MIME Multipart/Related Content-type, E. Levinson, Authors. Internet Engineering Task Force, August 1998. Available at http://www.ietf.org/rfc/rfc2387.txt.
[IETF RFC 2396]
Uniform Resource Identifiers (URI): Generic Syntax, T. Berners-Lee, R. Fielding, L. Masinter, Authors. Internet Engineering Task Force, August 1998. Available at http://www.ietf.org/rfc/rfc2396.txt.
[IETF RFC 2616]
Hypertext Transfer Protocol -- HTTP/1.1, R. Fielding, J. Gettys, J. Mogul, H. Frystyk, L. Masinter, P. Leach, T. Berners-Lee, Authors. Internet Engineering Task Force, June 1999. Available at http://www.ietf.org/rfc/rfc2616.txt.
[IETF RFC 3023]
XML Media Types, M. Murata, S. St. Laurent, D. Kohn, Authors. Internet Engineering Task Force, January 2001. Available at http://www.ietf.org/rfc/rfc3023.txt.
[SOAP 1.2 Part 1: Messaging Framework]
SOAP Version 1.2 Part 1: Messaging Framework, M. Gudgin, M. Hadley, N. Mendelsohn, J-J. Moreau, H. Frystyk Nielsen, Editors. World Wide Web Consortium, 19 December 2002. This version of the SOAP Version 1.2 Part 1 Specification is http://www.w3.org/TR/2002/CR-soap12-part1-20021219/. The latest version of SOAP Version 1.2 Part 1 is available at http://www.w3.org/TR/soap12-part1/.
[SOAP 1.2 Part 2: Adjuncts]
SOAP Version 1.2 Part 2: Adjuncts, M. Gudgin, M. Hadley, N. Mendelsohn, J-J. Moreau, and H. Frystyk Nielsen, Editors. World Wide Web Consortium, 19 December 2002. This version of the SOAP Version 1.2 Part 2 Specification is http://www.w3.org/TR/2002/CR-soap12-part2-20021219/. The latest version of SOAP Version 1.2 Part 2 is available at http://www.w3.org/TR/soap12-part2/.
[XML 1.0]
Extensible Markup Language (XML) 1.0 (Second Edition), T. Bray, J. Paoli, C. M. Sperberg-McQueen, and E. Maler, Editors. World Wide Web Consortium, 10 February 1998, revised 6 October 2000. This version of the XML 1.0 Recommendation is http://www.w3.org/TR/2000/REC-xml-20001006. The latest version of XML 1.0 is available at http://www.w3.org/TR/REC-xml.
[XML Information Set]
XML Information Set, J. Cowan and R. Tobin, Editors. World Wide Web Consortium, 24 October 2001. This version of the XML Information Set Recommendation is http://www.w3.org/TR/2001/REC-xml-infoset-20011024. The latest version of XML Information Set is available at http://www.w3.org/TR/xml-infoset.
[XML Schema Structures]
XML Schema Part 1: Structures, H. Thompson, D. Beech, M. Maloney, and N. Mendelsohn, Editors. World Wide Web Consortium, 2 May 2001. This version of the XML Schema Part 1 Recommendation is http://www.w3.org/TR/2001/REC-xmlschema-1-20010502. The latest version of XML Schema Part 1 is available at http://www.w3.org/TR/xmlschema-1.
[XML Schema Datatypes]
XML Schema Part 2: Datatypes, P. Byron and A. Malhotra, Editors. World Wide Web Consortium, 2 May 2001. This version of the XML Schema Part 2 Recommendation is http://www.w3.org/TR/2001/REC-xmlschema-2-20010502. The latest version of XML Schema Part 2 is available at http://www.w3.org/TR/xmlschema-2.
[WSDL 1.2]
Web Services Description Language (WSDL) Version 1.2, R. Chinnici, M. Gudgin, J-J. Moreau, S. Weerawarana, Editors. World Wide Web Consortium, 24 January 2003. This version of the Web Services Description Version 1.2 Specification is available is available at http://www.w3.org/TR/2003/WD-wsdl12-20030124. The latest version of Web Services Description Version 1.2 is available at http://www.w3.org/TR/wsdl12.

5.2 Informative References

[WSDL 1.2 Primer]
Web Services Description (WSDL) Version 1.2: Primer, K. Sankar, K. Liu, D. Booth, Editors. World Wide Web Consortium, 24 January 2003. The editors' version of the Web Services Description Version 1.2: Primer document is available from http://www.w3.org/2002/ws/desc/.

A. Acknowledgements (Non-Normative)

This document is the work of the W3C Web Services Description Working Group.

Members of the Working Group are (at the time of writing, and by alphabetical order): Adi Sakala (IONA Technologies), Allen Brookes (Rogue Wave Softwave), Amelia Lewis (TIBCO/Extensibility), Arthur Ryman (IBM), Barbara Zengler (DaimlerChrysler Research and Technology), Dale Moberg (Cyclone Commerce), Dan Kulp (IONA Technologies), Daniel Schutzer (Citigroup), Dave Solo (Citigroup), David Booth (W3C), Dietmar Gaertner (Software AG), Don Mullen (TIBCO Software), Erik Ackerman (Lexmark), Glen Daniels (Macromedia), Igor Sedukhin (Computer Associates), Jacek Kopecky (Systinet), Jean-Jacques Moreau (Canon), Jeff Mischkinsky (Oracle Corporation), Jeffrey Schlimmer (Microsoft Corporation), Jerry Thrasher (Lexmark), Johan Pauhlsson (L'Échangeur), Jonathan Marsh (Chair, Microsoft Corporation), Kevin Canyang Liu (SAP), Laurent De Teneuille (L'Échangeur), Lily Liu (webMethods, Inc.), Martin Gudgin (Microsoft Corporation), Michael Champion (Software AG), Michael Mahan (Nokia), Michael Mealling (Verisign), Mike Ballantyne (Electronic Data Systems), Mike Davoren (W. W. Grainger), Mike McHugh (W. W. Grainger), Philippe Le Hégaret (W3C), Prasad Yendluri (webMethods, Inc.), Roberto Chinnici (Sun Microsystems), Sandeep Kumar (Cisco Systems), Sandra Swearingen (U.S. Department of Defense, U.S. Air Force), Sanjiva Weerawarana (IBM), Stefano Pogliani (Sun Microsystems), Stephen White (SeeBeyond), Steve Graham (Global Grid Forum), Steve Lind (AT&T), Steve Tuecke (Global Grid Forum), Tim Finin (University of Maryland), Tom Jordahl (Macromedia), Umit Yalcinalp (Oracle Corporation), Waqar Sadiq (Electronic Data Systems), William Stumbo (Xerox), William Vambenepe (Hewlett-Packard Company), Youenn Fablet (Canon)

Previous members were: Aaron Skonnard (DevelopMentor), Don Wright (Lexmark), Jochen Ruetschlin (DaimlerChrysler Research and Technology), Joyce Yang (Oracle Corporation), Keith Ballinger (Microsoft), Krishna Sankar (Cisco Systems), Mario Jeckle (DaimlerChrysler Research and Technology), Pallavi Malu (Intel Corporation)

The people who have contributed to discussions on www-ws-desc@w3.org are also gratefully acknowledged.

B. Part 2 Change Log (Non-Normative)

B.1 WSDL Specification Changes

Date Author Description
20030117 JCS Incorporated resolution for Issue 5 (@encodingStyle). Referenced (rather than in-lined XML Schema).
20030117 JJM Various editorial fixes.
20030116 JCS Updated pseudo and XML Schema.
20030116 JJM Added propertyConstraint section.
20030116 JJM Added soap:module section.
20030115 JCS Incorporated resolutions for Issue 25 (drop @use and @encoding), Issue 51 (headers reference element/type), and attribute rollup into text and schema. Began reworking SOAP HTTP binding to use Infoset model. Removed informative appendices 'Notes on URIs' and example WSDL documents; expect them to appear in the primer. Updated SOAP 1.2 references to CR.
20030114 JJM Removed ednote saying Part 2 is out of synch with Part 1.
20030111 JJM Incorporated resolution for issue 17 (role AII).
20030109 JJM Incorporated resolution for issue 4 (Namespaces).
20020702 JJM Added summary to prefix table.
20020628 JJM Added out-of-synch-with-Part2 and not-soap12-yet ednote.
20020621 JJM Commented out the link to the previous version. There is no previous version for 1.2 right now.
20020621 JJM Rewrote the Notation Conventions section.
20020621 JJM Added reference to part 0 in introduction. Renumbered references.
20020621 JJM Simplified abstract and introduction.
20020621 JJM Obtain the list of WG members from a separate file.
20020621 JJM Updated stylesheet and DTDs to latest XMLP stylesheet and DTDs.
20020621 JJM Deleted placeholder for appendix C "Location of Extensibility Elements", since this is part 1 stuff and extensibility has been reworked anyway.
20020621 JJM Corrected link to issues lists
20020621 JJM Updated title from "WSDL" to "Web Services Description Language". Now refer to part 1 as "Web Services... Part 1: Framework
20020621 JJM Added Jeffrey as an editor :-). Removed Gudge (now on Part 2) :-(
20020411 JJM Fixed typos noticed by Kevin Liu
20020301 JJM Converted the "Schemas" sections
20020301 JJM Converted the "Wire WSDL examples" sections
20020301 JJM Converted the "Notes on URIs" sections
20020301 JJM Converted the "Notational Conventions" sections
20020301 JJM Converted the "References" sections
20020301 JJM Converted the "MIME Binding" section to XML
20020221 JJM Converted the "HTTP Binding" section to XML
20020221 JJM Added placeholders for the "Wire examples" and "Schema" sections
20020221 JJM Converted the "SOAP Binding" section to XML
20020221 JJM Added the Change Log
20020221 JJM Added the Status section
20020221 JJM Simplified the introduction; referred to Part1 for a longer introduction
20020221 JJM Renamed to "Part 2: Bindings"
20020221 JJM Created from http://www.w3.org/TR/2001/NOTE-wsdl-20010315

B.2 XML Schema Changes

The encoding schema has been updated to be compliant with the XML Schema Recommendations ([XML Schema Structures] and [XML Schema Datatypes]). The table below shows the categories of change.

Class Meaning
@@@ @@@

The table below lists the changes to the encoding schema.

Class Description
@@@ @@@