W3C

Service Modeling Language, Version 1.1

W3C Working Draft 12 September 2008

This version:
http://www.w3.org/TR/2008/WD-sml-20080912/
Latest version:
http://www.w3.org/TR/sml/
Previous version:
http://www.w3.org/TR/2008/WD-sml-20080303/
Editors:
Bhalchandra Pandit, Microsoft Corporation
Valentina Popescu, IBM Corporation
Virginia Smith, HP

This document is also available in these non-normative formats: XML.


Abstract

This specification defines the Service Modeling Language, Version 1.1 (SML) used to model complex services and systems, including their structure, constraints, policies, and best practices. SML uses XML Schema and Schematron.

Status of this Document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

This is the Last Call Working Draft of the Service Modeling Language, Version 1.1 specification for review by W3C members and other interested parties. It has been developed by the Service Modeling Language (SML) Working Group, which is a part of the Extensible Markup Language (XML) Activity. The Last Call review period for this document extends until 3 October 2008. Comments on this document should be made in W3C's public installation of Bugzilla, specifying "SML" as the product. Instructions can be found at http://www.w3.org/XML/2006/01/public-bugzilla. If access to Bugzilla is not feasible, please send your comments to the W3C SML comments mailing list, public-sml@w3.org (archive). Each Bugzilla entry and email message should contain only one comment.

The features and algorithms described in the normative portion of the document are specified in enough detail adequate for early implementation experiments.

Publication as a Working Draft does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

Comments on this document are invited and are to be sent to the public-sml@w3.org mailing list (public archive).

This document was produced by a group operating under the 5 February 2004 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.

Table of Contents

1. Introduction (Non-Normative)
2. Notations and Terminology
    2.1 Notational Conventions
    2.2 Terminology
    2.3 XML Namespaces
3. Dependencies on Other Specifications
4. SML References
    4.1 SML Reference Definitions
        4.1.1 SML Reference
        4.1.2 Null SML Reference
        4.1.3 Unresolved SML Reference
        4.1.4 SML Reference Target
    4.2 SML Reference Semantics
        4.2.1 At Most One Target
        4.2.2 Consistent References
        4.2.3 Identical Targets
        4.2.4 Multiple References  
        4.2.5 Null SML References
        4.2.6 Deterministic Evaluation of SML Constraints
        4.2.7 smlfn:deref() XPath Extension Function
    4.3 SML Reference Schemes
        4.3.1 SML URI Reference Scheme
            4.3.1.1 smlxpath1() scheme
5. SML Constraints
    5.1 Constraints on SML References
        5.1.1 sml:acyclic
            5.1.1.1 SML Constraint Construction
            5.1.1.2 Schema Component Rules
            5.1.1.3 Instance Validity Rules
        5.1.2 Constraints on SML Reference Targets
            5.1.2.1 SML Constraint Construction
            5.1.2.2 Schema Component Rules
            5.1.2.3 Instance Validity Rules
        5.1.3 SML Reference Constraints Summary (Non-Normative)
    5.2 SML Identity Constraints
        5.2.1 Syntax and Semantics
            5.2.1.1 SML Constraint Construction
            5.2.1.2 Schema Component Rules
            5.2.1.3 Instance Validity Rules
    5.3 Valid Restriction of SML Constraint Values
    5.4 SML Constraints and Complex Type Derivation
        5.4.1 Overview of SML Constraint Processing and Complex Type Derivation
        5.4.2 Formal Definition
            5.4.2.1 Properties
            5.4.2.2 SML Constraint Construction
            5.4.2.3 Instance Validity Rules
6. Rules
    6.1 Informal Description (Non-Normative)
    6.2 Rule Support
    6.3 Rules Associated with Schema Components
        6.3.1 SML Rule Construction
        6.3.2 Schema Component Rules
        6.3.3 Instance Validity Rules
    6.4 Rules Authored in Rule Documents
        6.4.1 Rule Binding
7. Localization of Natural Language Messages
    7.1 Variable Substitution
8. Conformance Criteria
9. SML Extensions Reference (Non-Normative)
    9.1 Attributes
        9.1.1 sml:acyclic
        9.1.2 sml:ref
        9.1.3 sml:nilref
        9.1.4 sml:targetElement
        9.1.5 sml:targetRequired
        9.1.6 sml:targetType
        9.1.7 sml:locid
    9.2 Elements
        9.2.1 sml:key
        9.2.2 sml:keyref
        9.2.3 sml:unique
        9.2.4 sml:uri
    9.3 XPath functions
        9.3.1 smlfn:deref
10. References
    10.1 Normative
    10.2 Non-Normative

Appendices

A. Normative SML Schema
B. Model Definition Document Sample (Non-Normative)
C. SML References Sample (Non-Normative)
D. SML URI Reference Scheme Sample (Non-Normative)
E. SML Identity Constraints Sample (Non-Normative)
F. Localization and Variable Substitution Sample (Non-Normative)
G. Acknowledgements (Non-Normative)


1. Introduction (Non-Normative)

The Service Modeling Language (SML) provides a rich set of constructs for creating models of complex services and systems. Depending on the application domain, these models may include information such as configuration, deployment, monitoring, policy, health, capacity planning, target operating range, service level agreements, and so on. Models provide value in several important ways.

  1. Models focus on capturing all invariant aspects of a service/system that must be maintained for the service/system to function properly.

  2. Models represent a powerful mechanism for validating changes before applying the changes to a service/system. Also, when changes happen in a running service/system, they can be validated against the intended state described in the model. The actual service/system and its model together enable a self-healing service/system ― the ultimate objective. Models of a service/system must necessarily stay decoupled from the live service/system to create the control loop.

  3. Models are units of communication and collaboration between designers, implementers, operators, and users; and can easily be shared, tracked, and revision controlled. This is important because complex services are often built and maintained by a variety of people playing different roles.

  4. Models drive modularity, re-use, and standardization. Most real-world complex services and systems are composed of sufficiently complex parts.  Re-use and standardization of services/systems and their parts is a key factor in reducing overall production and operation cost and in increasing reliability.

  5. Models enable increased automation of management tasks. Automation facilities exposed by the majority of services/systems today could be driven by software ― not people ― both for reliable initial realization of a service/system as well as for ongoing lifecycle management.

A model in SML is realized as a set of interrelated XML documents. The XML documents contain information about the parts of a service, as well as the constraints that each part must satisfy for the service to function properly. Constraints are captured in two ways:

  1. Schemas ― these are constraints on the structure and content of the documents in a model. SML uses XML Schema [XML Schema Structures, XML Schema Datatypes] as the schema language. In addition SML defines a set of extensions to XML Schema to support references that may cross document boundaries.

  2. Rules ― are Boolean expressions that constrain the structure and content of documents in a model. SML uses Schematron [ISO/IEC 19757-3, Introduction to Schematron, Improving Validation with Schematron] and XPath [XPath] for rules.

One of the important operations on the model is to establish its validity. This involves checking whether all data in a model satisfies the schemas and rules declared.

This specification focuses primarily on defining the extensions to XML Schema for references that cross document boundaries, Schematron usage in SML, as well as the process of model validation. It is assumed that the reader is familiar with XML Schema and Schematron.

SML scenarios require several features that either do not exist or are not fully supported in XML Schema. These features can be classified as follows:

  1. SML references – XML documents introduce boundaries across content that needs to be treated as a unit. XML Schema does not have any support for references that cross documents, although it does support references to elements in the same document through xs:ID, xs:IDREF, xs:key and xs:keyref. References between elements defined in separate SML model documents are fundamental to the SML specification. SML extends XML Schema to support references that may cross document boundaries, and a set of constraints on those references that apply regardless of whether they cross document boundaries or not.

  2. Rules – XML Schema does not support a language for defining arbitrary constraints on the structure and content of XML documents. SML uses Schematron to express assertions on the structure and content of XML documents.

XML Schema supports two forms of extension: "attributes in different namespace" and "application information elements"; both forms are used by SML extensions.

2. Notations and Terminology

2.1 Notational Conventions

The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [IETF RFC 2119].

This specification uses the Augmented Backus-Naur Form (ABNF) notation [RFC 2234].

This specification follows the same conventions for schema components as those used in the XML schema specification [XML Schema Structures]. That is, references to properties of schema components are links to the relevant definition, set off with curly braces, for instance {example property}. References to properties of information items as defined in [XML Information Set] are notated as links to the relevant section thereof, set off with square brackets, for example [children].

This specification refers to terms such as XML document, element, attribute, etc. for the sake of brevity. The alternative would be to use terms like "XML document or a Synthetic Infoset", "element information item", "attribute information item", etc. at each place. This would make the specification excessively verbose without adding to or changing the meaning of the existing text. The use of the concise terms is not intended to exclude other XML representations. The concepts defined in this specification apply to all forms of XML representations.

The content of this specification is normative except for sections or texts that are explicitly marked as non-normative. If a section is marked as non-normative, then all contained sub-sections are non-normative, even if they are not explicitly marked as such. All notes are non-normative unless otherwise specified.

2.2 Terminology

The following terms are used in this specification. They are listed here in alphabetical order.

Document

A well-formed XML document, as defined in [XML].

Implementation-Defined

An implementation-defined feature or behavior may vary among model processors; the precise behavior is not specified by this specification but MUST be specified by the implementor of each model processor.

Implementation-Dependent

An implementation-dependent feature or behavior may vary among model processors; the precise behavior is not specified by this or any other W3C specification and is not required to be specified by the implementor for any particular implementation.

Model

A set of inter-related documents that describe a service or system.  Each model consists of two disjoint subsets of documents – model definition documents and model instance documents.

Model Definition Documents

The subset of documents in a model that describes the schemas and rules that govern the structure and content of the model's documents. This specification defines two types of model definition document, schema documents and rule documents, but permits implementations to define other types of model definition documents. Such other types of model definition documents do not play any role in model validation.

Model Instance Documents

The subset of documents in a model that describes the structure and content of the modeled entities.

Model Processor

A model processor is an embodiment that processes a conforming SML model using, in whole or in part, semantics defined by this specification.

Model Validation

Model validation is the process of determining whether or not a model is both conforming and valid. [8. Conformance Criteria]

Model Validator

A model validator is a model processor capable of performing model validation.

Rule

A rule is a boolean expression that constrains the structure and content of a set of documents in a model.

Rule Bindings

A rule binding is an association of a set of one or more rule documents with a set of zero or more model documents. The documents associated with a given rule document are said to be "bound" to it. For a model to be valid, every definition document and instance document in the model must conform to the constraints defined by every rule document it is bound to. It is permissible for a rule document to have no bindings associated with it, and for a model document to be bound to zero rule documents.

Rule Document

A rule document is a model definition document consisting of Schematron constraints.

Schema document

A schema document is a model definition document that conforms to the XML Schema specification [XML Schema Structures] definition of a schema document.

Schematron Constraint

The information contained within a single sch:schema element.

SML Reference

An SML Reference is an element with an sml:ref attribute whose value is "true".

Note:

Conceptually, an SML reference is used to signal a link from one element in an SML model to another element in the same model.

SML Reference Scheme

An SML Reference Scheme is a set of rules defining the syntax used to create an instance of the reference scheme in the context of an SML reference, plus a set of rules for resolving an instance of the reference scheme to its target. Whenever "reference scheme" occurs in this specification, it should be assumed to mean "SML reference scheme" unless otherwise noted. Despite similar names, the term SML reference scheme is unrelated to XPointer schemes and URI schemes.

Target

An element in a model to which an SML reference resolves is called the target of that SML reference.

Target-complete Identifier

A target-complete identifier is a URI or IRI that contains all the information required to locate the target of an SML reference. It is a consequence of this definition that a target-complete identifier cannot be a relative URI/IRI.

2.3 XML Namespaces

Table 2-1 lists XML namespaces that are used in this specification. The choice of any namespace prefix is arbitrary and not semantically significant.

Table 2-1. XML Namespaces used in this specification.
PrefixXML NamespaceSpecification(s)
sml http://www.w3.org/2008/09/sml This specification
smlfn http://www.w3.org/2008/09/sml-function This specification
xs http://www.w3.org/2001/XMLSchema [XML Schema Structures, XML Schema Datatypes]
sch http://purl.oclc.org/dsdl/schematron [ISO/IEC 19757-3]

3. Dependencies on Other Specifications

Other specifications on which this one depends are listed in [Normative-References].

4. SML References

Support for SML references in an SML model includes:

  1. The ability to use multiple SML reference schemes for an SML reference.

  2. An extensibility mechanism allowing new SML reference schemes to be defined.

  3. Constraints on the type of a referenced element.

  4. The ability to define key, unique, and key reference constraints across SML references.

Model validators MUST support SML references as defined by this specification.

Appendix C. SML References Sample has an example that shows how SML references are defined and used.

4.1 SML Reference Definitions

4.1.1 SML Reference

An element information item in an SML model instance document is as an SML reference if and only if it has an attribute information item for which all of the following is true:

  1. Its [local name] is ref

  2. Its [namespace name] is http://www.w3.org/2008/09/sml

  3. Its [normalized value], after whitespace normalization using collapse following schema rules, is either "true" or "1".

Note:

This mechanism enables schema-less identification of SML references, i.e., SML references can be identified without relying on the Post Schema Validation Infoset (PSVI). [XML Schema Structures]

It is implementation-defined whether model processors that are not also model validators use the XML Infoset [XML Information Set] or the Post Schema Validation Infoset (PSVI) [XML Schema Structures] for SML reference identification.

Note:

SML model validators must use PSVI to identify SML references. See 8. Conformance Criteria.

An SML reference is considered to be an instance of a specific SML reference scheme, if it can be identified as such according to that SML reference scheme's rules. See 4.3 SML Reference Schemes. An SML reference MAY be an instance of multiple SML reference schemes.

Although its normative definition allows several syntaxes to be used to identify an SML reference, for the sake of brevity and consistency, the rest of this specification uses sml:ref="true" to denote an SML reference in examples and text.

The following example shows an SML reference that is an instance of the SML URI Reference scheme.

<RefElement sml:ref="true">
    <sml:uri>targetDocument.xml</sml:uri>
</RefElement>

4.1.2 Null SML Reference

An SML reference is null if and only if it has an attribute information item for which all of the following is true

  1. Its [local name] is nilref

  2. Its [namespace name] is http://www.w3.org/2008/09/sml

  3. Its [normalized value] after whitespace normalization using collapse following schema rules, is either "true" or "1".

It is a consequence of the preceding that this specification assigns no meaning to the sml:nilref attribute when it is used on an element that is not an SML reference. Model validators MAY choose to warn their invokers should they detect this condition in a document.

The following example shows a null SML reference.

<RefElement sml:ref="true" sml:nilref="true">
    <sml:uri>targetDocument.xml</sml:uri>
</RefElement>

Note:

sml:nilref may be useful in the case where the schema author defines a complex type specifying sml:ref="true" with a fixed value of "true", but the instance author wants to signal the absence of a target.

It is implementation-defined whether model processors that are not also model validators use the XML Infoset [XML Information Set] or the Post Schema Validation Infoset (PSVI) [XML Schema Structures] to identify null SML references.

Note:

SML model validators must use PSVI to identify null SML references. See 8. Conformance Criteria.

4.1.3 Unresolved SML Reference

An SML reference is unresolved if and only if all of the following is true:

  1. It is a non-null SML reference.

  2. None of the reference schemes, which the SML reference is recognized as using, resolves to an element in the model.

Note:

The notion of unresolved reference is context dependent. That is, different model processors, based on the set of SML reference schemes they understand and which are used in the model they process, may consider different SML references to be unresolved.

The following example shows an unresolved SML reference (assuming that the document dummy.xml does not exist in the model).

<RefElement sml:ref="true">
    <sml:uri>dummy.xml</sml:uri>
</RefElement>

4.1.4 SML Reference Target

The element node that a non-null SML reference resolves to is its target. The target of an SML reference MUST be part of the same SML model as the SML reference. Null SML references have no target.

The method of determining which documents are part of an SML model is implementation-defined.

Note:

For example, an SML model may consist of documents listed in a configuration file or an SML model could be construed as the transitive closure of documents referred to by any SML references starting from a set of documents known to be in the model.

The following example shows an SML reference that targets the second Course child element of the root element of the document target.xml.

<RefElement sml:ref="true" xmlns:e="urn:example">
    <sml:uri>target.xml#smlxpath1(e:Course[2])</sml:uri>
</RefElement>

document 'target.xml':
----------------------
<Courses xmlns="urn:example">
    <Course>
        <Name>PHY101</Name>
        <Grade>A</Grade>
    </Course>
    <Course>
        <Name>MAT101</Name>
        <Grade>A</Grade>
    </Course>
</Courses>

4.2 SML Reference Semantics

Model validators MUST attempt to resolve an SML reference using all the reference schemes of which the SML reference is recognized as an instance.

4.2.1 At Most One Target

Every non-null SML reference MUST target at most one element in a model. This means that each recognized reference scheme used in the SML reference MUST NOT resolve to more than one target.

The following example shows an SML reference that violates the at-most-one-target rule.

<RefElement sml:ref="true" xmlns:e="urn:example">
    <sml:uri>target.xml#smlxpath1(e:Course)</sml:uri>
</RefElement>

document 'target.xml':
----------------------
<Courses xmlns="urn:example">
    <Course>
        <Name>PHY101</Name>
        <Grade>A</Grade>
    </Course>
    <Course>
        <Name>MAT101</Name>
        <Grade>A</Grade>
    </Course>
</Courses>

4.2.2 Consistent References

If a non-null SML reference is an instance of multiple reference schemes, all recognized reference schemes MUST resolve to the same target or they all MUST be unresolved.

4.2.3 Identical Targets

To determine if two targets are the same or different, model validators MUST obey the following rules.

  1. If both of the following are true, then a model validator MUST consider both targets to be the same.

    1. The definition of the reference scheme(s) specifies how URIs are transformed to target-complete identifiers.

    2. The two target-complete identifiers are identical using a case-sensitive, codepoint-by-codepoint comparison.

  2. Otherwise, a model validator MUST consider both targets to be different when there is something available in the element information items for the targets that tells them apart. For example, if there is an infoset property for which the 2 targets have different values, they are different. This applies recursively for complex-valued properties.

  3. For all other cases, it is implementation-defined whether to treat the targets as the same or not.

4.2.4 Multiple References  

An element in a document MAY be targeted by multiple SML references.

4.2.5 Null SML References

A null SML reference is an explicit declaration of intent by the document author that the target of the SML reference does not exist. If an SML reference is recognized as null, then model processors MUST NOT attempt to recognize any reference schemes used in it.

4.2.6 Deterministic Evaluation of SML Constraints

Each non-null SML reference MUST satisfy all of the following conditions in order to be able to deterministically evaluate SML constraints and rules associated with it.

  1. The reference must have at most one target. [4.2.1 At Most One Target]

  2. The reference MUST be consistent. [4.2.2 Consistent References]

4.2.7 smlfn:deref() XPath Extension Function

The deref() function takes a node set of elements and returns a node set consisting of element nodes corresponding to the elements referenced by the input node set.  In particular, for each SML reference R in the input node set the output node set contains at most one element node.

Let, I = input node set. That is, the set of nodes passed to the deref() function.

Let, O = output node set. That is, the set of nodes returned by the deref() function.

The behavior of deref() function MUST satisfy the following constraints:

  1. For each SML reference R in the input node set I:

    1. If the implementation recognizes no SML reference scheme used in the SML reference R, then no element is added to O.

    2. If the implementation recognizes R as an instance of N supported reference schemes, then deref() is not required to attempt to resolve all N schemes. Its behavior in this case is implementation-defined and the set of reference schemes that are actually attempted may be any subset of the recognized schemes. This is subject to the following constraints:

      1. If deref() doesn't attempt to resolve any reference scheme or if none of the attempted reference schemes resolves, then no element is added to O.

      2. If at least one of the attempted reference schemes resolves to more than one target element, then 0 or 1 of the targets is added to O.

      3. If one attempted reference scheme resolves to a target different from the target resolved by another attempted reference scheme, then 0 or 1 of the targets is added to O.

      4. If one attempted reference scheme resolves and another doesn't, then 0 or 1 of the targets is added to O.

      5. If none of the above is true (that is, all attempted reference schemes resolve to the same one and only one target element, call it T), then one target element (namely, T) is added to O, if it does not already exist in O.

Note:

The above describes the behavior required for a general XPath 1.0 deref() library function, and as such exhibits several significant differences from the behavior required to validate SML references during model validation. First, it can be used to successfully process instance documents whose SML model validity is unknown or invalid, although the results in this case may not be interoperable. Second, since XPath 1.0 defines no way for a function to signal erroneous input to its caller, the behavior here is specified to return results for SML references that do not obey all of the validity rules, e.g. a reference whose XPath expression evaluates to more than one node. As described in this section, such a function would be insufficient to check the validity of SML references.

Model validators MUST provide an implementation of the deref() XPath extension function. In addition to the above requirements for general deref() function implementations, for each SML reference using recognized schemes, deref() in model validators MUST attempt to resolve at least one of the recognized schemes.

4.3 SML Reference Schemes

An SML reference MAY be an instance of a variety of reference schemes. SML does not mandate the use of any specific reference schemes. An SML reference scheme MAY use child elements, attributes, both, or neither to capture the information necessary to identify the reference target. It is OPTIONAL that all elements in an SML model be reachable via an SML reference. This will depend on the support defined by the chosen reference scheme.

Although SML does not require the use of any specific scheme, it does specify how a reference MUST be represented when using SML-defined reference schemes. This specification defines the 4.3.1 SML URI Reference Scheme for use in SML references.

An SML reference scheme definition MUST specify all of the following:

  1. The set of rules that, when satisfied, identify an SML reference as an instance of the scheme. An SML reference scheme definition MAY impose additional validity requirements on SML references recognized as instances of that scheme. Model validators MUST NOT apply such requirements to SML references that are not instances of the corresponding reference scheme.

  2. The set of rules that, when evaluated, resolve the SML reference to its target element node.

  3. An assertion that states whether instances of the reference scheme are transformed to target-complete identifiers. If they are transformed to target-complete identifiers, the reference scheme definition MUST describe the transformation process.

An SML reference scheme definition MUST specify all of the preceding items as they apply to valid instances of the SML reference scheme, and MAY specify them for other (invalid) instances.

4.3.1 SML URI Reference Scheme

The SML URI Reference Scheme is defined as follows:

  1. An SML reference is identified as an instance of the SML URI Reference Scheme if and only if exactly one element information item whose [local name] is uri and whose [namespace name] is http://www.w3.org/2008/09/sml is present as a child of that reference element.

    An instance of the SML reference scheme is valid if it meets all of the following requirements.

    1. The content of the uri element MUST be of type xs:anyURI as defined in the XML schema specification [XML Schema Datatypes].

    2. The fragment identifier (if present) MUST follow the syntax of one of the following.

      1. 4.3.1.1 smlxpath1() scheme

      2. Shorthand Pointer

  2. An SML reference that is an instance of the SML URI Reference Scheme is resolved using the following steps:

    1. An XML document D is obtained as follows:

      1. If the URI reference is a same-document reference as defined in the applicable URI RFC, then D is the document containing the SML reference.

      2. Otherwise, D is determined as follows:

        1. If the URI reference is a relative reference, then let U be the result of resolving the reference using the [base URI] property [XML Information Set] of the <sml:uri> element as the base URI. Otherwise, U is the URI reference itself. The computation of the [base URI] property is implementation-defined.

        2. Dereference U as defined in the applicable specifications. If the document targeted by U is in the current SML model, then D is that document. Otherwise, if the document is not in the current SML model, then the SML URI Reference Scheme instance is unresolved (and D has no value).

      Note:

      As a result of the above definition, if the retrieved object is not of XML media type or if it is not well-formed XML then, by definition, that object is not a document as defined by this specification. In this case, the SML reference scheme instance is unresolved.

    2. If no fragment component is present in the URI reference, the SML URI Reference Scheme instance resolves to the root element of D.

    3. If a fragment component is present in the URI reference, then the appropriate case among the following applies:

      1. If the fragment component complies with the smlxpath1() XPointer scheme syntax, then the reference target is obtained by applying the fragment component to D, as defined in section 4.3.1.1 smlxpath1() scheme .

      2. If the fragment component complies with the Shorthand Pointer syntax, then the appropriate case among the following applies:

        1. If a target T can be identified in D based on the XML-Schema-determined ID, then the reference target is T.

        2. If a target in D cannot be identified based on the XML-Schema-determined ID, then it is implementation-defined whether the reference target in D is identified based on other criteria allowed for Shorthand Pointers.

  3. Instances of the SML URI Reference Scheme are transformed to target-complete identifiers through standard URI processing, as described in the applicable URI RFC.

The following example shows an SML reference that is an instance of the SML URI Reference scheme. The reference targets the element with ID targetId in document target.xml.

<RefElement sml:ref="true">
    <sml:uri>target.xml#targetId</sml:uri>
</RefElement>
4.3.1.1 smlxpath1() scheme

The smlxpath1() scheme is intended to be used with the XPointer Framework [XPointer] to allow addressing of elements. The 4.3.1 SML URI Reference Scheme uses it to encode fragment identifiers.

This section describes the syntax and semantics of the smlxpath1() scheme and the behavior of XPointer processors with respect to this scheme.

  1. Scheme name: smlxpath1

  2. Scheme syntax using ABNF [RFC 2234]:

    SMLXPath1_Fragment_ID ::= 'smlxpath1' '(' SMLXPath1_SchemeData ')'

    SMLXPath1_SchemeData ::= XPath1.0_LocationPath

    where,

    XPath1.0_LocationPath is the LocationPath production defined in the XPath 1.0 specification [XPath].

  3. The deref() XPath extension function MUST NOT be present in the expression evaluation context function library when processing the location path in SMLXPath1_SchemeData.

  4. Namespace Binding Context: The smlxpath1() scheme inherits the set of namespace bindings available to the parent sml:uri element.

  5. For a given document D, the element targeted by a scheme instance is obtained by applying the location path in SMLXPath1_SchemeData to the root element of D. The result MUST either be 1 element node or be empty. Otherwise, the XPointer result is an error.

    Note:

    In the case of instances of the SML URI Reference scheme, D is the document resolved to by the non-fragment part of the URI reference, as defined in item 2.a in section 4.3.1 SML URI Reference Scheme.

The following example shows an SML reference that is an instance of the SML URI Reference scheme. The reference targets the root element of the document target.xml.

<RefElement sml:ref="true">
    <sml:uri>target.xml#smlxpath1(/*)</sml:uri>
</RefElement>

5. SML Constraints

5.1 Constraints on SML References

SML supports the following attributes for expressing constraints on SML references.

Table 5-1. Attributes
NameDescription
sml:acyclic Used to specify whether cycles are prohibited for an SML reference.
sml:targetRequired Used to specify that an SML reference's target element is required to be present in the model.
sml:targetElement Used to constrain the name of the SML reference's target.
sml:targetType Used to constrain the type of the SML reference's target.

SML defines a new property for every Complex Type Definition schema component:

{acyclic}

An xs:boolean value. Required.

The value of {acyclic} for xs:anyType is false.

SML defines three new properties for every Element Declaration component:

{target required}

An xs:boolean value. Required.

{target element}

An Element Declaration component. Optional.

{target type}

A Type Definition component. Optional.

5.1.1 sml:acyclic

sml:acyclic is used to specify whether or not a cycle is allowed on instances of a complex type. Model validators MUST support the sml:acyclic attribute on any <xs:complexType> element in a schema document. This attribute is of type xs:boolean and its actual value can be either true or false.

5.1.1.1 SML Constraint Construction

The {acyclic} property value of a complex type definition is as specified by the appropriate case among the following:

  1. If sml:acyclic is present, then {acyclic} has the actual value of this attribute.

  2. Otherwise, if its {base type definition} is a complex type definition, then {acyclic} has the same value of {acyclic} as its {base type definition}.

  3. Otherwise ({base type definition} is a simple type definition), {acyclic} is false.

5.1.1.2 Schema Component Rules

If a complex type definition CT's {base type definition} is also a complex type definition and has {acyclic} true, then CT MUST have {acyclic} true.

5.1.1.3 Instance Validity Rules

If CT is a complex type definition with {acyclic} true, then instances of CT MUST NOT create cycles in the model. More precisely, the directed graph constructed in the following way MUST be acyclic:

  1. The nodes in the graph are all the elements resolved to by SML references of type CT or types derived from CT.

  2. If a node N in the graph is or contains an SML reference R of type CT or a type derived from CT, and R resolves to T (which must also be a node in the graph), then an arc is drawn from N to T.

5.1.2 Constraints on SML Reference Targets

SML defines three attributes: sml:targetRequired, sml:targetElement, and sml:targetType, for constraining the target of an SML reference. These three attributes are collectively called sml:target* attributes. Model validators MUST support these attributes on all xs:element elements with a name attribute. The sml:target* constraints are attached to the element declaration schema component.

5.1.2.1 SML Constraint Construction
  1. {target required} is as specified by the appropriate case among the following:

    1. If sml:targetRequired is present, then {target required} is the actual value of this attribute.

    2. Otherwise if the element declaration has a {substitution group affiliation}, then {target required} is the same as that of the {substitution group affiliation}.

    3. Otherwise {target required} is false.

  2. {target element} is as specified by the appropriate case among the following:

    1. If sml:targetElement is present, then its actual value MUST resolve to a global element declaration G, and {target element} is G.

    2. Otherwise if {substitution group affiliation} is present, then {target element} is the same as that of the {substitution group affiliation}.

    3. Otherwise {target element} is absent.

  3. {target type} is as specified by the appropriate case among the following:

    1. If sml:targetType is present, then its actual value MUST resolve to a global type definition T, and {target type} is T.

    2. Otherwise if {substitution group affiliation} is present, then {target type} is the same as that of the {substitution group affiliation}.

    3. Otherwise {target type} is absent.

5.1.2.2 Schema Component Rules

Model validators MUST enforce the following:

  1. If a global element declaration E has a {substitution group affiliation} G, then the value of E's SML target constraint property P (one of {target required}, {target element} or {target type}) MUST be a valid restriction of the corresponding property of G as defined in section 5.3 Valid Restriction of SML Constraint Values.

  2. If two element declarations E1 and E2 have the same {namespace name} and {name} and they are both contained (directly, indirectly, or implicitly) in a content model of a complex type, then E1 and E2 have the same {target required}, {target element}, and {target type}.

Note:

The above condition #2 on the use of sml:target* attributes has been defined to reduce the implementation burden on model validators. Please refer to section 5.4.1 Overview of SML Constraint Processing and Complex Type Derivation for more information.

5.1.2.3 Instance Validity Rules

If an element declaration E has {target required} true, then each element instance of E that is also an SML reference MUST target some element in the model. That is, no instance of E can be a null or unresolved SML reference.

If an element declaration E has {target element} TE, then each element instance of E that is also a resolved SML reference MUST target an element that is an instance of TE or an instance of some global element declaration in the substitution group of TE.

If an element declaration E has {target type} TT, then each element instance of E that is also a resolved SML reference MUST target an element whose [type definition] is TT or a type derived from TT.

5.1.3 SML Reference Constraints Summary (Non-Normative)

The effect of the above instance validation rules is summarized in the following table.

Table 5-2. Target Constraints and SML Reference Categories.
Acyclic targetRequired targetElement targetType
Non-referenceSatisfiedSatisfiedSatisfiedSatisfied
NullSatisfiedViolatedSatisfiedSatisfied
UnresolvedSatisfiedViolatedSatisfiedSatisfied
ResolvedCheckSatisfiedCheckCheck

"Check" in the table above means that the appropriate constraint must be evaluated.

The constraints described above can be useful even on element declarations whose instances are not necessarily SML references, because the decision about whether to include a constraint and the decision about whether to make the element an SML reference can be made independently - some choices made by the schema author, other choices made by the instance document author.

5.2 SML Identity Constraints

XML Schema supports the definition of uniqueness and reference constraints through xs:key, xs:unique, and xs:keyref elements. However, the scope of these constraints is restricted to a single document. SML defines analogs for these constraints, whose scope extends to multiple documents by allowing them to traverse SML references.

Model validators MUST support the following elements for defining SML identity constraints across SML references, as child elements of xs:element/xs:annotation/xs:appinfo where the xs:element has a name attribute.

NameDescription
sml:key Similar to xs:key except that the selector and field XPath expression can use the smlfn:deref function
sml:unique Similar to xs:unique except that the selector and field XPath expression can use the smlfn:deref function
sml:keyref Similar to xs:keyref except that the selector and field XPath expression can use the smlfn:deref function

Appendix B. Model Definition Document Sample and Appendix E. SML Identity Constraints Sample have examples that show how SML identity constraints are defined.

SML identity constraints are attached to the element declaration schema component. SML defines a new property for every element declaration schema component:

{SML identity-constraints definitions}

A set of SML identity constraint definitions components, which have the same set of properties as XML Schema identity constraint definitions.

5.2.1 Syntax and Semantics

Names of all SML identity constraint definitions exist in a single symbol space, which is disjoint from any symbol space of XML Schema components.

5.2.1.1 SML Constraint Construction

For each sml:key, sml:unique, or sml:keyref element without the ref attribute specified, {SML identity-constraints definitions} contains a component corresponding to this element, as specified in section 3.11 Identity-constraint Definitions of the XML Schema specification [XML Schema Structures]), where sml:selector and sml:field elements are used in place of xs:selector and xs:field.

For each sml:key, sml:unique, or sml:keyref element with the ref attribute specified, {SML identity-constraints definitions} contains the component resolved to by the actual value of the ref attribute, with the following conditions:

  1. The name attribute MUST NOT be specified.

  2. The sml:selector and sml:field child elements MUST NOT be specified.

  3. If the element is sml:key, then the value of ref attribute MUST resolve to an SML key constraint.

  4. If the element is sml:unique, then the value of the ref attribute MUST resolve to an SML unique constraint.

  5. If element is sml:keyref, then the value of the ref attribute MUST resolve to an SML keyref constraint, and the refer attribute MUST NOT be specified.

In addition to SML identity constraints obtained from the above explicit definitions or references, if an element declaration S has a {substitution group affiliation} G, then its {SML identity-constraints definitions} also contains members of {SML identity-constraints definitions} of G.

5.2.1.2 Schema Component Rules
  1. sml:selector XPath expression has the same syntax as that defined in the XML Schema identity constraint selector XPath syntax with one exception. The sml:selector XPath MAY use smlfn:deref() functions, with function calls nested to any depth, at the beginning of the expression. The XML Schema identity constraint selector Path production is amended to support this requirement as defined below.

    Path ::= ('.//')? Step ( '/' Step)* | DerefExpr
    DerefExpr ::= NCName ':' 'deref(' Step ('/'Step)* ')' ('/'Step)* |
                  NCName ':' 'deref(' DerefExpr ')' ('/'Step)*
    
  2. sml:field XPath expression has the same syntax as that defined in the XML Schema identity constraint field XPath syntax with one exception. The sml:field XPath MAY use smlfn:deref() functions, with function calls nested to any depth, at the beginning of the expression. The XML Schema identity constraint field Path production is amended to support this requirement as defined below.

    Path ::= ('.//')? ( Step '/')* ( Step | @NameTest ) |
             DerefExpr ('/' @NameTest)?
    DerefExpr ::= NCName ':' 'deref(' Step ('/'Step)* ')' ('/'Step)* |
                  NCName ':' 'deref(' DerefExpr ')' ('/'Step)*
    
  3. The {SML identity-constraints definitions} of an element declaration MUST NOT contain two identity constraints with the same name.

    Note:

    This could happen if the ref attribute resolves to an identity constraint already contained in the same element declaration’s {SML identity-constraints definitions}.

  4. If a global element declaration E has a {substitution group affiliation} G, then the value of E's {SML identity-constraints definitions} property MUST be a valid restriction of the value of the corresponding property of G as defined in section 5.3 Valid Restriction of SML Constraint Values.

  5. If two element declarations E1 and E2 have the same {namespace name} and {name} and they are both contained (directly, indirectly, or implicitly) in a content model of a complex type, then E1 and E2 MUST have the same set of {SML identity-constraints definitions}.

    Note:

    This rule is defined to reduce the implementation burden for model validators. Please refer to section 5.4.1 Overview of SML Constraint Processing and Complex Type Derivation for more information.

5.2.1.3 Instance Validity Rules

Validation rules for SML identity constraints are the same as specified in section 3.11 Identity-constraint Definitions of the XML Schema specification [XML Schema Structures]), with the addition of support for the smlfn:deref() function.

5.3 Valid Restriction of SML Constraint Values

Let BV = value of SML constraint property P (one of {target required}, {target element}, {target type} or {SML identity-constraints definitions}).

Let RV = value that restricts BV.

For RV to be a valid restriction of BV, the appropriate case among the following MUST be true.

  1. For {target required}, the appropriate case among the following applies.

    1. If BV is true, RV is true.

    2. If BV is false, RV is either true or false.

  2. For {target element}, one of the following applies.

    1. RV is same as BV.

    2. RV is in the substitution group of BV.

  3. For {target type}, one of the following applies.

    1. RV is same as BV.

    2. RV is a type derived from BV.

  4. For {SML identity-constraints definitions}, one of the following applies.

    1. RV is same as BV. That is, all of the following is true.

      1. The number of entries in RV is same as the number of entries in BV.

      2. For each entry in BV, there exists an entry in RV with the same qualified name ({name} + {target namespace}).

    2. RV is a superset of BV. That is, RV has all of the entries from BV as defined in the previous item and it has one or more additional entries.

5.4 SML Constraints and Complex Type Derivation

5.4.1 Overview of SML Constraint Processing and Complex Type Derivation

This section is non-normative.

For a complex type D derived from its {base type definition} B, if an element declaration ED is included in D and an element declaration EB is included in B, and ED and EB satisfy the "NameAndTypeOK" constraint then the SML constraints (target* and SML identity constraints) applicable to ED must be,

  1. same as those on EB in case of derivation by extension.

  2. same or more restrictive compared to those on EB in case of derivation by restriction.

SML defines this behavior to ensure that one cannot get rid of SML constraints on elements in a complex type by simply deriving another type from that type.

Enforcing this condition across derivation by restriction would require an implementation to match a restricting particle to the corresponding restricted particle in order to evaluate condition 2 above. This level of support is not provided by most XML Schema frameworks; thus most SML validators would otherwise need to duplicate large parts of XML Schema's compilation logic to verify consistent usage of SML constraints across derivation by restriction. In order to reduce this implementation burden on model validators, SML requires that all element declarations with a given name that are included in a complex type definition must have the same SML constraint value. This allows model validators to find the restricted particle for a restricting particle using a simple name match.

This also means that the value of a given SML constraint applicable to all element declarations of a given name in complex type definition can be logically viewed as available at a single place, for example in a property attached to that complex type, rather than being scattered across element declarations in that type. The next section uses this logical view because it makes it easier to understand and formally define SML constraint behavior across complex type derivation.

5.4.2 Formal Definition

5.4.2.1 Properties

SML defines four properties for every complex type definition schema component CT.

{target required constraint list}

A list of (qname, value) pairs, where,

  1. qname is a qualified name ({namespace name} + {name}).

  2. value is the value of a {target required} property.

{target element constraint list}

A list of (qname, value) pairs, where,

  1. qname is a qualified name ({namespace name} + {name}).

  2. value is the value of a {target element} property.

{target type constraint list}

A list of (qname, value) pairs, where,

  1. qname is a qualified name ({namespace name} + {name}).

  2. value is the value of a {target type} property.

{identity constraint list}

A list of (qname, value) pairs, where,

  1. qname is a qualified name ({namespace name} + {name}).

  2. value is the value of a {SML identity-constraints definitions} property.

The value of the above 4 properties for xs:anyType is empty.

5.4.2.2 SML Constraint Construction

Let,

Property P is assigned value V as defined below:

  1. For each element declaration ED, with qualified name qn, contained in CT:

    1. If ED does not have constraint C, that is, the value of PED is absent (or false in case of targetRequired), then skip ED.

    2. Otherwise, if there is already an entry in V for qn, then skip ED.

      Note:

      If the value of the existing entry is different from the value of PED then it is treated as a schema validation error as defined in section 5.1.2.2 Schema Component Rules and section 5.2.1.2 Schema Component Rules.

    3. Otherwise, the entry (qn, value of PED) is added to the list V.

  2. The appropriate case among the following applies:

    1. If CT is derived by extension from a simple type definition then value V is empty.

    2. If CT is derived by extension from a complex type definition BT:

      The initial value of V is computed as defined in list item 1 above and then,

      For each entry (qn, vb) in the value of P in BT:

      1. If V has an entry (qn, vc) present, then ensure that vc is same as vb. If it is not same, then it is treated as a schema validation error.

      2. If V does not have any entry (qn, vc) present, then copy (qn, vb) into V.

    3. If CT is derived by restriction from a complex type definition BT:

      The initial value of V is computed as defined in list item 1 above and then,

      For each entry (qn, vb) in the value of P in BT:

      1. If V has an entry (qn, vc) present, then ensure that vc is a valid restriction of vb as defined in section 5.3 Valid Restriction of SML Constraint Values. If it is not, then it is treated as a schema validation error.

      2. If V does not have any entry (qn, vc) present, then copy (qn, vb) into V.

5.4.2.3 Instance Validity Rules

Let,

  • CT = the complex type of element declaration ED.

  • E = an instance of ED.

  • C = a child element of E.

If C matches an element declaration contained in CT and if one or more of CT's constraint properties, defined in 5.4.2.1 Properties, contain an entry matching C's qualified name ({namespace name} + {name}) then the value of each of those entries is used for evaluating the corresponding constraint on C, as defined in section 5.1.2.3 Instance Validity Rules and section 5.2.1.3 Instance Validity Rules, as if the matching element declaration has the corresponding constraint with that value.

Note:

One way for constraints to be embedded in element declarations or type definitions in a schema is for constraint element to be included in a schema document, embedded at the appropriate locations within the xs:element or xs:complexType elements which describe the element declaration or type definition.

Element declarations and type definitions created by other means can, however, also have constraints embedded within the {application information} of their {annotation} properties. How such embedding is accomplished is outside the scope of this specification and is likely to vary among model processors.

6. Rules

XML Schema supports a number of built-in grammar-based constraints but it does not support a language for defining arbitrary rules for constraining the structure and content of documents. Schematron [ISO/IEC 19757-3] is an ISO/IEC standard for defining assertions concerning a set of XML documents. SML uses Schematron to add support for additional model constraints not supported in XML Schema.

6.1 Informal Description (Non-Normative)

This section assumes that the reader is familiar with Schematron concepts; the Schematron standard is documented in [ISO/IEC 19757-3] and [Introduction to Schematron, Improving Validation with Schematron] are good tutorials on an older version of Schematron.

Constraints can be specified using the sch:assert and sch:report elements from Schematron.  The following example uses sch:assert elements to specify two constraints:

  1. An IPv4 address must have four bytes

  2. An IPv6 address must have sixteen bytes

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:IPAddress">
    <xs:simpleType  name="IPAddressVersionType">
        <xs:restriction base="xs:string" >
            <xs:enumeration value="V4" />
            <xs:enumeration value="V6" />
        </xs:restriction>
    </xs:simpleType>

    <xs:complexType name="IPAddress">
        <xs:annotation>
            <xs:appinfo>
                <sch:schema xmlns:sch="http://purl.oclc.org/dsdl/schematron">
                   <sch:ns prefix="tns" uri="urn:IPAddress" />
                   <sch:pattern id="Length">
                      <sch:rule context=".">
                         <sch:assert test="tns:version != 'V4' or count(tns:address) = 4">
                              A v4 IP address must have 4 bytes.
                         </sch:assert>
                         <sch:assert test="tns:version != 'V6' or count(tns:address) = 16">
                              A v6 IP address must have 16 bytes.
                         </sch:assert>
                      </sch:rule>
                   </sch:pattern>
                </sch:schema>            
            </xs:appinfo>
        </xs:annotation>
        <xs:sequence>
            <xs:element name="version" type="tns:IPAddressVersionType" />
            <xs:element name="address" type="xs:byte" minOccurs="4" maxOccurs="16" />
        </xs:sequence>
    </xs:complexType>
</xs:schema>     

A Schematron constraint embedded in the xs:annotation/xs:appinfo element for a complex type definition or an element declaration is applicable to all instances of the complex type or element. In the above example, the pattern Length (which is a part of the containing Schematron constraint) is applicable for all elements whose type is IPAddress or a derived type of IPAddress. A pattern element contains one or more sch:rule elements and a single sch:rule element contains one or more assert and/or report elements. Each sch:rule element specifies its context using the context attribute. This context expression is evaluated in the context of each applicable element and results in an element node set for which the assert and report test expressions contained in the sch:rule element are evaluated. The context expression is defined as an XSLT Pattern. This means that the smlfn:deref function may not be used in the location path of a context expression.

In the above example, context=".". Therefore the two assert expressions are evaluated in the context of each applicable element, i.e., each element of type IPAddress. The test expression for an assert is a boolean expression, and the assert is violated (or fires) if its test expression evaluates to false. A report is violated (or fires) if its test expression evaluates to true. Thus, an assert can be converted to a report by simply negating its test expression. The following example uses report elements to represent the IP address constraints of the previous example:

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:IPAddress">
    <xs:simpleType  name="IPAddressVersionType">
        <xs:restriction base="xs:string">
           <xs:enumeration value="V4"/>
           <xs:enumeration value="V6"/>
        </xs:restriction>
    </xs:simpleType>

    <xs:complexType name="IPAddress">
        <xs:annotation>
            <xs:appinfo>
                <sch:schema xmlns:sch="http://purl.oclc.org/dsdl/schematron">
                    <sch:ns prefix="tns" uri="urn:IPAddress" />
                    <sch:pattern id="Length">
                        <sch:rule context=".">
                            <sch:report test="tns:version = 'V4' and count(tns:address)!= 4">
                                A v4 IP address must have 4 bytes.
                            </sch:report>
                            <sch:report test="tns:version = 'V6' and count(tns:address) != 16">
                                A v6 IP address must have 16 bytes.
                            </sch:report>
                        </sch:rule>
                    </sch:pattern>
                </sch:schema>            
            </xs:appinfo>
        </xs:annotation>
        <xs:sequence>
            <xs:element name="version" type="tns:IPAddressVersionType" />
            <xs:element name="address" type="xs:byte" minOccurs="4" maxOccurs="16" />
        </xs:sequence>
    </xs:complexType>
</xs:schema>     

If a sch:assert or sch:report is violated, the violation is reported together with the specified message. The message can include substitution strings based on XPath expressions. These can be specified using the sch:value-of element. The following example uses the sch:value-of element to include the number of specified address bytes in the message:

<sch:assert test="tns:version != 'v4' or count(tns:address) = 4">
     A v4 IP address must have 4 bytes instead of the specified
     <sch:value-of select="string(count(tns:address))"/> bytes.
</sch:assert>

In addition to being embedded in complex type definitions, constraints can also be embedded in global element declarations. Such constraints are evaluated for each instance element corresponding to the global element declaration. Consider the following example:

<xs:element name="StrictUniversity" type="tns:UniversityType">
    <xs:annotation>
        <xs:appinfo>
            <sch:schema xmlns:sch="http://purl.oclc.org/dsdl/schematron">
                <sch:ns prefix="u" uri="http://www.university.example.org/ns" />
                <sch:ns prefix="smlfn"  
                        uri="http://www.w3.org/2008/09/sml-function"/>
                <sch:pattern id="StudentPattern">
                    <sch:rule context="u:Students/u:Student">
                        <sch:assert test="smlfn:deref(.)[starts-with(u:ID,'99')]">
                            The specified ID <sch:value-of select="string(u:ID)"/>
                             does not begin with 99.
                        </sch:assert>
                        <sch:assert test="count(u:Courses/u:Course)>0">
                            The student <sch:value-of select="string(u:ID)"/> must be enrolled
                            in at least one course.
                        </sch:assert>
                    </sch:rule>
                </sch:pattern>
             </sch:schema>
         </xs:appinfo>
    </xs:annotation>
</xs:element>

The sch:rule elements contained in StudentPattern are applicable to all element instances of the StrictUniversity global element declaration. For each StrictUniversity element, the XPath expression specified as the value of the context attribute is evaluated to return a node set, and the test expressions for the two asserts are evaluated for each node in this node set.  Thus, these two asserts verify the following conditions for each instance of StrictUniversity.

  1. The ID of each student must begin with '99'.

  2. Each student must be enrolled in at least one course.

Schematron patterns can be authored in separate rule documents that are then bound to a set of documents in the model.

The following example shows the constraints for StrictUniversity expressed in a separate document:

<?xml version="1.0" encoding="utf-8" ?>
<sch:schema xmlns:sch="http://purl.oclc.org/dsdl/schematron">
    <sch:ns prefix="u" uri="http://www.university.example.org/ns" />
    <sch:ns prefix="smlfn" uri="http://www.w3.org/2008/09/sml-function"/>
    <sch:pattern id="StudentPattern">
        <sch:rule context="u:StrictUniversity/u:Students/u:Student">
            <sch:assert test="smlfn:deref(.)[starts-with(u:ID,'99')]">
                The specified ID <sch:value-of select="string(u:ID)"/>
                does not begin with 99.
            </sch:assert>
            <sch:assert test="count(u:Courses/u:Course)>0">
                The student <sch:value-of select="string(u:ID)"/> must be enrolled
                in at least one course.
            </sch:assert>
        </sch:rule>
    </sch:pattern>
</sch:schema>

The binding of the rule document containing the StudentPattern pattern to documents that may contain instances of StrictUniversity element is implementation-defined.

6.2 Rule Support

Model validators are REQUIRED to support and evaluate XPath expressions augmented with the smlfn:deref() function in the body of Schematron constraints.

If the queryBinding attribute is not specified, then its value is assumed to be set to "xslt". Model validators MUST support the "xslt" query binding. Model validators MAY additionally support query bindings other than "xslt".

6.3 Rules Associated with Schema Components

SML defines a new property for every complex type definition schema component and every element declaration schema component.

{rules}

A set of Schematron constraints.

6.3.1 SML Rule Construction

The {rules} property contains all of the Schematron constraints applicable to instances of the given type definition or element declaration. Its value is derived in part from sch:schema elements embedded within the component, and sometimes in part from the {rules} properties of other components.

sch:schema elements MAY appear as items in the {application information} of the {annotation} of a global element declaration or a global complex type definition. This specification assigns no meaning to sch:schema elements if they appear as items in any other location.

Let the local-rules of a given global element declaration or global complex type definition be the set of Schematron constraints embedded in the {application information} of that schema component's {annotation} property. For other schema components, local-rules is empty.

The value of the {rules} property of a schema component is computed as follows:

  1. The value of {rules} for xs:anyType is the empty set.

  2. If the schema component is a global element declaration, then the value of its {rules} is the union of its local-rules and the appropriate case from the following:

    1. If the element declaration has a {substitution group affiliation}, then the value of {rules} of the {substitution group affiliation}.

    2. Otherwise (the element declaration has no {substitution group affiliation}), the empty set.

  3. If the schema component is a complex type definition, then the value of its {rules} property is the union of its local-rules and the appropriate case from the following:

    1. If the component's {base type definition} is a complex type definition, then the {rules} of the {base type definition}. This is true for derivation by extension as well as for derivation by restriction.

    2. Otherwise (i.e., when {base type definition} is a simple type definition), the empty set.

  4. Otherwise, the value of the {rules} property is not affected by this specification.

6.3.2 Schema Component Rules

Model validators MUST enforce the following rules.

  1. If a complex type D is derived by restriction or extension from {base type definition} B and if B has {rules} defined on it then they MUST be automatically copied to D and unioned with the {rules} defined on D.

  2. If a complex type D is derived by restriction from {base type definition} B then, a global element declaration with non-empty {rules} contained in B MUST NOT be restricted to a local element declaration in D.

    Note:

    It is an error if all of the following are true.

    1. An element declaration ED is contained (directly, indirectly, or implicitly) in D and an element declaration EB is contained (directly, indirectly, or implicitly) in B.

    2. ED and EB satisfy the "NameAndTypeOK" constraint (for XML Schema's definition of valid restrictions, see Schema Component Constraint: Particle Valid (Restriction), Constraints on Particle Schema Components in [XML Schema Structures]).

    3. EB is a reference to a global element declaration with a Schematron constraint on it.

    4. ED is a local element declaration with the same name as EB.

6.3.3 Instance Validity Rules

Model validators MUST behave as follows:  

  1. Each Schematron constraint in {rules} of a complex-type definition CT MUST be evaluated for all element instances of type CT in a model during the model's validation.

  2. Each Schematron constraint in {rules} of a global element declaration G MUST be evaluated for all element instances of G in a model during the model's validation.

  3. All of the assertion tests in fired rules MUST succeed.

6.4 Rules Authored in Rule Documents

6.4.1 Rule Binding

Model validators MUST provide a mechanism to support the binding of Schematron patterns, authored in separate rule documents, to a set of documents in a model. Rule documents MAY be bound to model instance documents as well as model definition documents. The mechanism for binding rule documents to a set of documents in a model is implementation-defined.

7. Localization of Natural Language Messages

SML defines the sml:locid attribute in support of localization of the natural-language texts or messages. Model validators MAY support sml:locid attribute on the following elements:

  1. sch:assert and sch:report in a rule document.

  2. sch:assert and sch:report in a Schematron pattern embedded in the {application information} of the {annotation} property of a complex type definition or an element declaration.

  3. Elements in instance documents with textual content.

Model validators that support the sml:locid attribute MUST use the sml:locid attribute value to access the location of the translated text.

Note:

The mechanism for using the QName value of the sml:locid attribute to locate the translated text is implementation dependent. For example, the {namespace name} can be used to identify the resource containing the text and the {local name} can be used to identify the text within such resource. Refer to F. Localization and Variable Substitution Sample section for a concrete sample of how the sml:locid attribute can be used to support text localization.

7.1 Variable Substitution

There is often the case that a sch:assert or sch:report message can be reused in different situations. To be able to re-use a message, the schema author must be able to substitute variable content based on the context in which the message is being used.

Although this specification does not mandate the use of variable substitution in Schematron messages, it suggests the use of xsl:variable when variable substitution is desired. Refer to F. Localization and Variable Substitution Sample section for a concrete sample of how the xsl:variable can be used in support of reusing localized messages.

8. Conformance Criteria

A program is a conforming SML model validator if and only if it satisfies the following conditions:

  1. The validator MUST perform model validation as defined in this specification.

  2. The validator MUST support XML 1.0 [XML], XML Schema 1.0 [XML Schema Structures, XML Schema Datatypes], and XPath 1.0 [XPath] but MAY also additionally support any future versions of these specifications.

  3. The validator MUST support Schematron [ISO/IEC 19757-3].

  4. The validator MUST perform Schematron rule evaluation on the #ALL phase.

  5. The validator MUST support the deref() XPath extension function.

  6. The validator MUST identify all SML references in the model using the Post Schema Validation Infoset. [XML Schema Structures]

  7. The validator MUST use the Post Schema Validation Infoset to determine if an SML reference in the model is a null SML reference. [XML Schema Structures]

The conformance of a model and the validity of a model can be assessed if and only if all documents in the model are available to the model validator. A model validator MUST document its behavior when a model document is found to be unavailable (i.e. the behavior is implementation-defined). It MAY respond to this condition in ways that include but are not limited to: assessing the model as invalid, or treating this as a warning. The intent of the latitude granted to model validators in this case is to provide some implementation flexibility by not prescribing a limited set of choices, however it is be read narrowly rather than as a broad license to take unrelated actions like failing to enforce SML constraints on unrelated documents.

A model is a conforming SML model if and only if it satisfies the following conditions:

  1. Each document in the model MUST be a well-formed XML document [XML]

  2. For each XML Schema document in the model's definition documents, the [validity] property of the root element MUST be "valid" when schema validity is assessed with respect to a schema constructed from the XML Schema for Schemas and A. Normative SML Schema schema documents.

  3. All schemas assembled from the XML Schema documents in the model's definition documents MUST satisfy the conditions expressed in Errors in Schema Construction and Structure (§5.1). [XML Schema Structures]

  4. All schemas assembled from the XML Schema documents in the model's definition documents MUST satisfy the conditions expressed in sections 5.1.1.1 SML Constraint Construction, 5.1.1.2 Schema Component Rules, 5.1.2.1 SML Constraint Construction, 5.1.2.2 Schema Component Rules, 5.2.1.1 SML Constraint Construction, 5.2.1.2 Schema Component Rules, 6.3.1 SML Rule Construction and 6.3.2 Schema Component Rules.

  5. Each Schematron document in the model's definition documents MUST be a valid Schematron document [ISO/IEC 19757-3]

Note:

This specification does not define how schemas are assembled and which schema documents contribute to assembling the schemas.

A conforming SML model is valid if and only if it satisfies all of the following conditions:

  1. In each instance document in the model, which is bound to a schema, the [validity] property of the root element MUST be "valid", and the [validity] property of all the other elements and all the attributes MUST NOT be "invalid", when schema validity is assessed with respect to any schema that is bound to this instance document. The schema validity assessment starts with no stipulated declaration or definition at the root element. [XML Schema Structures]

    The schema-validity of instance documents not bound to any schema does not contribute to the validity or invalidity of the model.

    Note:

    How schemas are bound to instance documents is not defined by this specification. Multiple schemas may be bound to the same instance document.

    SML validity entails NOT being Schema-Invalid on the root or any descendant. SML validity can be non-vacuously checked only after assessment of Schema validity, and only on the portions of the subtree for which PSVI is available.

    Because the depth of PSVI is implementation-dependent, there is variability in the visibility of SML constraints available to the SML validator, and consequently in SML validity results.

  2. Each document in the model MUST satisfy all applicable Schematron constraints when validated in the #ALL phase.

  3. Each document in the model MUST satisfy all normative statements in this specification that pertain to model documents.

    Note:

    This means, for example, that each document must satisfy all applicable sml:acyclic, sml:target*, and SML identity constraints.

9. SML Extensions Reference (Non-Normative)

This section is a reference guide to the SML extensions of XML Schema and XPath.

9.1 Attributes

9.1.1 sml:acyclic

Used to specify that instances of an SML reference of a given type and its derived types do not create any cycles in a model

<xs:attribute name="acyclic" type="xs:boolean"/>

If this attribute is set to true for a complex type CT, then instances of CT (including any derived types of CT) that are SML references cannot create any cycles in a model. In the following example, HostedOnRefType is a complex type declaration whose instances cannot create a cycle:

<xs:complexType name="HostedOnRefType" sml:acyclic="true">
...
</xs:complexType>

If the sml:acyclic attribute is not specified or set to false for a complex type declaration, then instances of this type that are SML references may create cycles in a model.

9.1.2 sml:ref

This global attribute is used to identify SML references.

<xs:attribute name="ref" type="xs:boolean"/>

 Any element that has sml:ref="true" will be treated as an SML reference.

9.1.3 sml:nilref

This global attribute is used to identify null SML references.

<xs:attribute name="nilref" type="xs:boolean"/>

Any SML reference that has sml:nilref="true" or sml:nilref="1" will be treated as a null SML reference.

9.1.4 sml:targetElement

A QName representing the name of a referenced element

 
<xs:attribute name="targetElement" type="xs:QName"/>

sml:targetElement is supported as an attribute for any element declarations. The value of this attribute must be the name of some global element declaration. Let sml:targetElement="ns:GTE" for some element declaration E. Then each element instance of E must target an element that is an instance of ns:GTE or an instance of some global element declaration in the substitution group hierarchy whose head is ns:GTE.

In the following example, the element referenced by instances of HostOS must be an instance of win:Windows

<xs:element name="HostOS" type="tns:HostOSRefType" sml:targetElement="win:Windows" minOccurs="0"/>

<xs:complexType name="HostOSRefType">
    <xs:sequence>
            <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>

A model is invalid if its documents violate one or more sml:targetElement constraints.

9.1.5 sml:targetRequired

Used to specify that instances of an SML reference must target elements in the model, i.e., an instance of the SML reference can not be null or contain an unresolved reference which does not target any element in the model. Therefore it is an error if targetRequired="true" is specified on an element declaration where the corresponding SML reference element R has sml:nilref="true".

<xs:attribute name="targetRequired" type="xs:boolean"/>

In the following example, the targetRequired attribute is used to specify that application instances must have a host operating system.

<xs:complexType name="ApplicationType">
    <xs:sequence>
        <xs:element name="Name" type="xs:string"/>
        <xs:element name="Vendor" type="xs:string"/>
        <xs:element name="Version" type="xs:string"/>
        <xs:element name="HostOSRef" type="tns:HostOSRefType" sml:targetRequired="true"/>
    </xs:sequence>
</xs:complexType>

<xs:complexType name="HostOSRefType">
    <xs:sequence>
      <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>

A model is invalid if its documents violate one or more sml:targetRequired constraints.

9.1.6 sml:targetType

A QName representing the type of a referenced element

<xs:attribute name="targetType" type="xs:QName" />

sml:targetType is supported as an attribute for any element declarations. If the value of this attribute is specified as T, then the type of the referenced element must either be T or a derived type of T. In the following example, the type of the element referenced by the OperatingSystem element must be "ibm:LinuxType" or its derived type

<xs:element name="OperatingSystem" type="tns:OperatingSystemRefType"
            sml:targetType="ibm:LinuxType" minOccurs="0"/>

<xs:complexType name="OperatingSystemRefType">
    <xs:sequence>
        <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>

A model is invalid if its documents violate one or more sml:targetType constraints.

9.1.7 sml:locid

This attribute can be defined on the sch:assert, sch:report and on any element with textual content. The sml:locid attribute is used to define the translation location for the text content of the containing element.

<xs:attribute name="locid" type="xs:QName"/>

The mechanism for using the QName value of the sml:locid attribute to locate a translated text is implementation specific and hence outside the scope of this specification.

9.2 Elements

9.2.1 sml:key

This element is used to specify a key constraint in some scope. The semantics are the same as that for xs:key except that sml:key can also be used to specify key constraints on other documents, i.e., the  sml:selector child element of sml:key can contain deref functions to resolve elements in another document.

<xs:element name="key" type="sml:keybase"/>

sml:key is supported in the appinfo of an xs:element.  

9.2.2 sml:keyref

Applies a constraint in the context of the containing xs:element that scopes the range of a nested document reference.

    
<xs:element name="keyref">
    <xs:complexType>
        <xs:complexContent>
            <xs:extension base="sml:keybase">
                <xs:attribute name="refer" type="xs:QName" use="optional"/>
            </xs:extension>
        </xs:complexContent>
    </xs:complexType>
</xs:element>

sml:keyref is supported in the appinfo of an xs:element.  

9.2.3 sml:unique

This element is used to specify a uniqueness constraint in some scope. The semantics are the same as that for xs:unique except that sml:unique can also be used to specify uniqueness constraints on other documents, i.e., the  sml:selector child element of sml:unique can contain deref functions to resolve elements in another document.

<xs:element name="unique" type="sml:keybase"/>

sml:unique is supported in the appinfo of an xs:element.  

9.2.4 sml:uri

Specifies an SML reference that is an instance of the SML URI reference scheme.

<xs:element name="uri" type="xs:anyURI"/>

This element must be used to specify SML references that use the SML URI Reference Scheme.

9.3 XPath functions

9.3.1 smlfn:deref

node-set deref(node-set)

This function takes a node set and attempts to resolve the SML references. The resulting node set is the set of elements that are obtained by successfully resolving (or de-referencing) the  SML references. For example,

deref(/u:Universities/u:Students/u:Student)

will resolve the SML reference, Student. The target of an SML reference must always be an element.

10. References

10.1 Normative

[SML-IF 1.1]
Service Modeling Language Interchange Format Version 1.1, Bhalchandra Pandit, Valentina Popescu, Virginia Smith, Editors. World Wide Web Consortium, 12 September 2008. This version of the Service Modeling Language Interchange Format specification is available at http://www.w3.org/TR/2008/WD-sml-if-20080912/. The latest version of the Service Modeling Language Interchange Format Version 1.1 specification is available at http://www.w3.org/TR/sml-if/
[IETF RFC 2119]
Key words for use in RFCs to Indicate Requirement Levels, S. Bradner, Author. Internet Engineering Task Force, June 1999. Available at http://www.ietf.org/rfc/rfc2119.txt.
[IETF RFC 3986]
Uniform Resource Identifier (URI): Generic Syntax , T. Berners-Lee, R. Fielding, L. Masinter, Authors. Internet Engineering Task Force, January 2005. Available at http://www.ietf.org/rfc/rfc3986.txt.
[IETF RFC 3987]
Internationalized Resource Identifiers (IRIs) , M. Duerst, M. Suignard, Authors. Internet Engineering Task Force, January 2005. Available at http://www.ietf.org/rfc/rfc3987.txt.
[RFC 2234]
Augmented BNF for Syntax Specifications: ABNF, Internet Mail Consortium, November 1997. Available at http://rfc.net/rfc2234.html.
[ISO/IEC 19757-3]
Information technology ― Document Schema Definition Languages (DSDL) ― Part 3: Rule-based validation ― Schematron. International Organization for Standardization and International Electrotechnical Commission, 1 January 2006. Available at http://standards.iso.org/ittf/PubliclyAvailableStandards/c040833_ISO_IEC_19757-3_2006(E).zip
[XML]
Extensible Markup Language (XML) 1.0 (Fourth Edition), T. Bray, J. Paoli, C. M. Sperberg-McQueen, and E. Maler, Editors. World Wide Web Consortium, 10 February 1998, revised 16 August 2006. This version of the XML 1.0 Recommendation is http://www.w3.org/TR/2006/REC-xml-20060816. The latest version of XML 1.0 is available at http://www.w3.org/TR/REC-xml.
[XML Information Set]
XML Information Set (Second Edition), John Cowan, Richard Tobin, Editors. World Wide Web Consortium, 4 February 2004. This version of the XML Information Set Recommendation is http://www.w3.org/TR/2004/REC-xml-infoset-20040204/. The latest version of XML Information Set is available at http://www.w3.org/TR/xml-infoset/.
[XML Schema Structures]
XML Schema Part 1: Structures Second Edition, H. Thompson, D. Beech, M. Maloney, and N. Mendelsohn, Editors. World Wide Web Consortium, 2 May 2001, revised 28 October 2004. This version of the XML Schema Part 1 Recommendation is http://www.w3.org/TR/2004/REC-xmlschema-1-20041028. The latest version of XML Schema 1.0 Part 1 is available at http://www.w3.org/TR/xmlschema-1.
[XML Schema Datatypes]
XML Schema Part 2: Datatypes Second Edition, P. Byron and A. Malhotra, Editors. World Wide Web Consortium, 2 May 2001, revised 28 October 2004. This version of the XML Schema Part 2 Recommendation is http://www.w3.org/TR/2004/REC-xmlschema-2-20041028. The latest version of XML Schema 1.0 Part 2 is available at http://www.w3.org/TR/xmlschema-2.
[XML Schema for Schemas]
XML Schema for XML Schemas. World Wide Web Consortium, 2 May 2001, revised 28 October 2004.
[XPath]
XML Path Language (XPath) Version 1.0, J. Clark and S. DeRose, Editors. World Wide Web Consortium, 16 November 1999. This version of XML Path Language (XPath) Version 1.0 is http://www.w3.org/TR/1999/REC-xpath-19991116. The latest version of XML Path Language (XPath) Version 1.0 is available at http://www.w3.org/TR/xpath.
[XPointer]
XPointer Framework, P. Grosso, E. Maler, J. Marsh, and N. Walsh, Editors. World Wide Web Consortium, 25 March 2003. This version of the XPointer Framework Recommendation is http://www.w3.org/TR/2003/REC-xptr-framework-20030325/ The latest version of XPointer Framework is available at http://www.w3.org/TR/xptr-framework/.
[xmlns() Scheme]
XPointer xmlns() Scheme, S. DeRose, R. Daniel Jr., E. Maler, and J. Marsh, Editors. World Wide Web Consortium, 25 March 2003. This version of the XPointer xmlns() Scheme Recommendation is http://www.w3.org/TR/2003/REC-xptr-framework-20030325/ The latest version of XPointer xmlns() Scheme is available at http://www.w3.org/TR/xptr-xmlns/.

10.2 Non-Normative

[Introduction to Schematron]
An Introduction to Schematron, Eddie Robertsson, Author. O'Reilly Media, Inc., 12 November 2003. Available at http://www.xml.com/pub/a/2003/11/12/schematron.html
[Improving Validation with Schematron]
Improving XML Document Validation with Schematron, Dare Obasanjo, Author. Microsoft Corporation, September 2004. Available at http://msdn2.microsoft.com/en-us/library/Aa468554.aspx
[XML Schema Primer]
XML Schema Part 0: Primer Second Edition, D. Fallside and P. Walmsley, Editors. World Wide Web Consortium, 2 May 2001, revised 28 October 2004. This version of the XML Schema Part 0 Recommendation is http://www.w3.org/TR/2004/REC-xmlschema-0-20041028. The latest version of XML Schema Part 0 is available at http://www.w3.org/TR/xmlschema-0.

A. Normative SML Schema

<?xml version="1.0" encoding="utf-8"?>

<!--
/*
 * Copyright © 2008 World Wide Web Consortium,
 *
 * (Massachusetts Institute of Technology, European Research Consortium for
 * Informatics and Mathematics, Keio University). All Rights Reserved. This
 * work is distributed under the W3C® Document License [1] in the hope that
 * it will be useful, but WITHOUT ANY WARRANTY; without even the implied
 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 *
 * [1] http://www.w3.org/Consortium/Legal/2002/copyright-documents-20021231
 */
-->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:sml="http://www.w3.org/2008/09/sml" targetNamespace="http://www.w3.org/2008/09/sml" elementFormDefault="qualified" blockDefault="#all" version="1.0" xml:lang="en" finalDefault="" attributeFormDefault="unqualified">
    
   <!--
        References
        ==========
    -->
   
    
   <!-- CONTEXT: To be used in any <xs:element> -->
   
    <xs:attribute name="ref" type="xs:boolean">
        <xs:annotation>
            <xs:documentation>
                Specifies if the element contains a reference
            </xs:documentation>
        </xs:annotation>
    </xs:attribute>
    
   <!-- CONTEXT: To be used in any <xs:element> -->
   
    <xs:attribute name="nilref" type="xs:boolean">
        <xs:annotation>
            <xs:documentation>
                Specifies that the reference element denotes a “null” reference. 
                To be used only on elements for which sml:ref="true".
            </xs:documentation>
        </xs:annotation>
    </xs:attribute>  
    
   <!-- CONTEXT: To be used in any <xs:element> -->
   
    <xs:attribute name="targetElement" type="xs:QName">
        <xs:annotation>
            <xs:documentation>
                A qualified name of a global element in the referenced document.
            </xs:documentation>
        </xs:annotation>
    </xs:attribute>
    
   <!-- CONTEXT: To be used in any <xs:element>-->
   
    <xs:attribute name="targetRequired" type="xs:boolean">
        <xs:annotation>
            <xs:documentation>
                If true, requires the target element of the reference to
                exist in the model.
            </xs:documentation>
        </xs:annotation>
    </xs:attribute>
    
   <!-- CONTEXT: To be used in any <xs:element>-->
   
    <xs:attribute name="targetType" type="xs:QName">
        <xs:annotation>
            <xs:documentation>
                A qualified name of the type of the element in the
                referenced document.
            </xs:documentation>
        </xs:annotation>
    </xs:attribute>
    
   <!-- CONTEXT: To be used in any <xs:complexType>-->
   
    <xs:attribute name="acyclic" type="xs:boolean">
        <xs:annotation>
            <xs:documentation>
                If this attribute is set to true for a type D 
                then instances of D should not create any
                cycles in a model. More precisely, the directed graph whose
                edges represent instances of D, and whose nodes represent
                documents that contain the source or target elements for
                instances of D, must be acyclic.
            </xs:documentation>
        </xs:annotation>
    </xs:attribute>
    
    
   <!-- CONTEXT: To be used in <sch:assert>, <sch:report>
         and elements with textual content.
         This attribute is used to support string localization.
         It is used to define the translation location for 
         the text content of the containing element.-->
     
    <xs:attribute name="locid" type="xs:QName"/>
    
    
   <!-- CONTEXT: Represents a reference using the URI scheme. To be
         used as a child  element of elements for which
         sml:ref="true". -->
   
    <xs:element name="uri" type="xs:anyURI">
        <xs:annotation>
            <xs:documentation>
                References in URI scheme must be representend by this
                element.  
            </xs:documentation>
        </xs:annotation>
    </xs:element>

    
   <!--
        Uniqueness and Key constraints
        ==============================
    -->
   

    <xs:complexType name="keybase" mixed="false">
        <xs:sequence minOccurs="0">
            <xs:element name="selector" type="sml:selectorXPathType"/>
            <xs:element name="field" type="sml:fieldXPathType" maxOccurs="unbounded"/>
            <xs:any namespace="##other" minOccurs="0" maxOccurs="unbounded" processContents="lax"/>
        </xs:sequence>
        <xs:attribute name="name" type="xs:NCName"/>
        <xs:attribute name="ref" type="xs:QName"/>
        <xs:anyAttribute namespace="##other" processContents="lax"/>
    </xs:complexType>
    <xs:element name="key" type="sml:keybase"/>
    <xs:element name="unique" type="sml:keybase"/>
    <xs:element name="keyref">
        <xs:complexType mixed="false">
            <xs:complexContent>
                <xs:extension base="sml:keybase">
                    <xs:attribute name="refer" type="xs:QName" use="optional"/>
                </xs:extension>
            </xs:complexContent>
        </xs:complexType>
    </xs:element>

    
   <!--
        Other Complex Types
        ==================
    -->
   

    <xs:complexType name="selectorXPathType" mixed="false">
        <xs:sequence>
            <xs:any namespace="##other" minOccurs="0" maxOccurs="unbounded" processContents="lax"/>
        </xs:sequence>
        <xs:attribute name="xpath" use="required">
            <xs:simpleType>
                <xs:restriction base="xs:string">
                    
   <!-- The value MUST conform to the selector BNF grammar defined in
                         section '4.4 Identity Constraints' in the SML specification.
                    -->
   
                </xs:restriction>
            </xs:simpleType>
        </xs:attribute>
        <xs:anyAttribute namespace="##other" processContents="lax"/>
    </xs:complexType>

    <xs:complexType name="fieldXPathType" mixed="false">
        <xs:sequence>
            <xs:any namespace="##other" minOccurs="0" maxOccurs="unbounded" processContents="lax"/>
        </xs:sequence>
        <xs:attribute name="xpath" use="required">
            <xs:simpleType>
                <xs:restriction base="xs:string">
                    
   <!-- The value MUST conform to the field BNF grammar defined in
                         section '4.4 Identity Constraints' in the SML specification.
                    -->
   
                </xs:restriction>
            </xs:simpleType>
        </xs:attribute>
        <xs:anyAttribute namespace="##other" processContents="lax"/>
    </xs:complexType>
</xs:schema>

B. Model Definition Document Sample (Non-Normative)

This model definition document sample illustrates the use of the following SML extensions:

  1. SML references

  2. key and keyref constraints

  3. Schematron constraints

<?xml version="1.0" encoding="utf-8"?>

<!--
/*
 * Copyright ©  World Wide Web Consortium,
 *
 * (Massachusetts Institute of Technology, European Research Consortium for
 * Informatics and Mathematics, Keio University). All Rights Reserved. This
 * work is distributed under the W3C® Document License [1] in the hope that
 * it will be useful, but WITHOUT ANY WARRANTY; without even the implied
 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 *
 * [1] http://www.w3.org/Consortium/Legal/2002/copyright-documents-20021231
 */
-->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org/SampleModel" xmlns:sml="http://www.w3.org/2008/09/sml" xmlns:smlfn="http://www.w3.org/2008/09/sml-function" xmlns:sch="http://purl.oclc.org/dsdl/schematron" targetNamespace="http://example.org/SampleModel" elementFormDefault="qualified" finalDefault="" blockDefault="" attributeFormDefault="unqualified">

  <xs:simpleType name="SecurityLevel">
    <xs:restriction base="xs:string">
      <xs:enumeration value="Low"/>
      <xs:enumeration value="Medium"/>
      <xs:enumeration value="High"/>
    </xs:restriction>
  </xs:simpleType>

  <xs:complexType name="Hostref" sml:acyclic="true" mixed="false">
    <xs:sequence>
      <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##any" processContents="lax"/>
  </xs:complexType>

  
   <!-- This element represents the host operating system for
       an application. Note that the type of the referenced
       element must be OperatingSystemType or a derived type
       of OperatingSystemType -->
   
  <xs:element name="HostOSRef" type="tns:Hostref" sml:targetType="tns:OperatingSystemType"/>

  <xs:complexType name="ApplicationType" mixed="false">
    <xs:sequence>
      <xs:element name="Name" type="xs:string"/>
      <xs:element name="Vendor" type="xs:string"/>
      <xs:element name="Version" type="xs:string"/>
      <xs:element ref="tns:HostOSRef" minOccurs="0"/>
    </xs:sequence>
  </xs:complexType> 

  <xs:simpleType name="ProtocolType">
    <xs:list>
      <xs:simpleType>
	<xs:restriction base="xs:string">
	  <xs:enumeration value="TCP"/>
	  <xs:enumeration value="UDP"/>
	  <xs:enumeration value="SMTP"/>
	  <xs:enumeration value="SNMP"/>
	</xs:restriction>
      </xs:simpleType>
    </xs:list>
  </xs:simpleType>

  <xs:complexType name="GuestAppRefType" sml:acyclic="false" mixed="false">
    <xs:sequence>
      <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##any" processContents="lax"/>
  </xs:complexType>
  
  <xs:element name="GuestAppRef" type="tns:GuestAppRefType" sml:targetType="tns:ApplicationType"/>

  <xs:complexType name="OperatingSystemType" mixed="false">
    <xs:sequence>
      <xs:element name="Name" type="xs:string"/>
      <xs:element name="FirewallEnabled" type="xs:boolean"/>
      <xs:element name="Protocol" type="tns:ProtocolType"/>
      
   <!-- The following element represents the applications hosted by
	   operating system -->
   
      <xs:element name="Applications" minOccurs="0">
	<xs:complexType mixed="false">
	  <xs:sequence>
	    <xs:element ref="tns:GuestAppRef" maxOccurs="unbounded"/>
	  </xs:sequence>
	</xs:complexType>
      </xs:element>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="OSRefType" sml:acyclic="false" mixed="false">
    <xs:sequence>
      <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##any" processContents="lax"/>
  </xs:complexType>

  <xs:element name="OSRef" type="tns:OSRefType" sml:targetType="tns:OperatingSystemType"/>

  <xs:complexType name="WorkstationType" mixed="false">
    <xs:sequence>
      <xs:element name="Name" type="xs:string"/>
      <xs:element ref="tns:OSRef"/>
      <xs:element name="Applications" minOccurs="0">
	<xs:complexType mixed="false">
	  <xs:sequence>
	    <xs:element ref="tns:GuestAppRef" maxOccurs="unbounded"/>
	  </xs:sequence>
	</xs:complexType>
      </xs:element>
    </xs:sequence>
  </xs:complexType> 

  <xs:element name="Workstation" type="tns:WorkstationType">
    <xs:annotation>
      <xs:appinfo>
	<sch:schema>
	  <sch:ns prefix="sm" uri="SampleModel"/>
	  <sch:ns prefix="smlfn" uri="http://www.w3.org/2008/09/sml-function"/>
	  <sch:pattern id="OneHostOS">
	    
   <!-- The constraints in the following rule are evaluated  
		 For all instances of the Workstation global element-->
   
	    <sch:rule context=".">
	      
   <!-- define a named variable - MyApplications -
		   for use in test expression-->
   
	      <sch:let name="MyApplications" value="smlfn:deref(sm:Applications/sm:GuestAppRef)"/>
	      <sch:assert test="count($MyApplications)=count($MyApplications/sm:HostOSRef)">
		Each application in workstation
		<sch:value-of select="string(sm:Name)"/>
		must be hosted on an operating system
	      </sch:assert>
	    </sch:rule>
	  </sch:pattern>
	</sch:schema>

	
   <!-- In a workstation, (Vendor,Name,Version) is the key for
	     guest applications -->
   
	<sml:key name="GuestApplicationKey">
	  <sml:selector xpath="smlfn:deref(tns:Applications/tns:GuestAppRef)"/>
	  <sml:field xpath="tns:Vendor"/>
	  <sml:field xpath="tns:Name"/>
	  <sml:field xpath="tns:Version"/>
	</sml:key>

	
   <!-- In a workstation, Name is the key for operating system -->
   
	<sml:key name="OSKey">
	  <sml:selector xpath="smlfn:deref(tns:OSRef)"/>
	  <sml:field xpath="tns:Name"/>
	</sml:key>
	
	
   <!-- In a workstation, the applications hosted by the
	     referenced operatinsystem must be a subset of the
	     applications in the workstation -->
   
	<sml:keyref name="OSGuestApplication" refer="tns:GuestApplicationKey">
	  <sml:selector xpath="smlfn:deref(tns:OSRef)/tns:Applications/tns:GuestAppRef"/>
	  <sml:field xpath="tns:Vendor"/>
	  <sml:field xpath="tns:Name"/>
	  <sml:field xpath="tns:Version"/>   
	</sml:keyref>

	
   <!-- In a workstation, the host operating system of guest
	     applications must be a subset of the operating system in
	     the workstation -->
   
	<sml:keyref name="ApplicationHostOS" refer="tns:OSKey">
	  <sml:selector xpath="smlfn:deref(tns:Applications/tns:GuestAppRef)/tns:HostOSRef"/>
	  <sml:field xpath="tns:Name"/>
	</sml:keyref>
      </xs:appinfo>
    </xs:annotation>
  </xs:element>

  <xs:element name="SecureWorkstation" type="tns:WorkstationType">
    <xs:annotation>
      <xs:appinfo>
	<sch:schema>
	  <sch:ns prefix="sm" uri="SampleModel"/>
	  <sch:ns prefix="smlfn" uri="http://www.w3.org/2008/09/sml-function"/>
	  <sch:pattern id="SecureApplication">
	    <sch:rule context="sm:Applications/sm:Application">
	      <sch:report test="smlfn:deref(.)[sm:SecurityLevel!='High']">
		Application <sch:value-of select="string(sm:Name)"/>
		from <sch:value-of select="string(sm:Vendor)"/>
		does not have high security level.
	      </sch:report>
	      <sch:assert test="smlfn:deref(.)[sm:Vendor='TrustedVendor']">
		A secure workstation can only contain
		applications from TrustedVendor.
	      </sch:assert>
	    </sch:rule>
	  </sch:pattern>
	</sch:schema>
      </xs:appinfo>
    </xs:annotation>
  </xs:element>

</xs:schema>

C. SML References Sample (Non-Normative)

The following example illustrates the use of SML references. Consider the following schema fragment:

<xs:element name="EnrolledCourse">
    <xs:complexType>
        <xs:sequence>
          <xs:element name="Name" type="xs:string"/>
          <xs:element name="Grade" type="xs:string"/>
          <xs:any namespace="##any" minOccurs="0"
                  maxOccurs="unbounded" processContents="lax"/>
        </xs:sequence>
        <xs:anyAttribute namespace="##any" processContents="lax"/>
    </xs:complexType>
</xs:element>

<xs:complexType name="StudentType">
    <xs:sequence>
        <xs:element name="ID" type="xs:string"/>
        <xs:element name="Name" type="xs:string"/>
        <xs:element name="EnrolledCourses" minOccurs="0">
            <xs:complexType>
                <xs:sequence>
                    <xs:element ref="tns:EnrolledCourse" maxOccurs="unbounded"/>
                </xs:sequence>
            </xs:complexType>
        </xs:element>
    </xs:sequence>
</xs:complexType>

The schema definition in the above example is SML agnostic and does not make use of any SML attributes, elements, or types. The EnrolledCourse element, however, has an open content model and this can be used to mark instances of EnrolledCourse as SML references as shown below:

<Student xmlns="http://www.university.example.org/ns"
         xmlns:sml="http://www.w3.org/2008/09/sml"
         xmlns:u="http://www.university.example.org/ns">
    <ID>1000</ID>
    <Name>John Doe</Name>
    <EnrolledCourses>
        <EnrolledCourse sml:ref="true">
            <Name>PHY101</Name>
            <Grade>A</Grade>
            <sml:uri>
                http://www.university.example.org/Universities/MIT/Courses.xml
                #smlxpath1(/u:Courses/u:Course[u:Name='PHY101'])
            </sml:uri>
        </EnrolledCourse>
        <EnrolledCourse sml:ref="false">
            <Name>MAT100</Name>
            <Grade>B</Grade>
            <sml:uri>
                http://www.university.example.org/Universities/MIT/Courses.xml
                #smlxpath1(/u:Courses/u:Course[u:Name='MAT100'])
            </sml:uri>
        </EnrolledCourse>
        <EnrolledCourse>
            <Name>SocialSkills</Name>
            <Grade>F</Grade>
        </EnrolledCourse>
    </EnrolledCourses>
</Student>

The first EnrolledCourse element in the above example is an SML reference since it specifies sml:ref="true". It uses the SML URI Reference Scheme to target the element for course  PHY101. The second and third EnrolledCourse elements are not SML references; the second element specifies sml:ref="false" and the third element does not specify the sml:ref attribute. Note that the second EnrolledCourse element contains an sml:uri element which satisfies the syntax of the SML URI Reference Scheme (referring to course MAT100) but this will be ignored since sml:ref="false" for this EnrolledCourse element.

Note that, there are no SML constraints defined on the EnrolledCourse element or on the type of that element in the schema. Therefore, even if the first EnrolledCourse element instance is marked as an SML reference, no SML constraints are evaluated for that element during model validation. However, checks such as the ones defined in section 4.2.1 At Most One Target and section 4.2.2 Consistent References are still performed on that SML reference during model validation.

An EnrolledCourse SML reference can be a marked as a null reference if it specifies the sml:nilref="true" attribute as shown in the following example (the first EnrolledCourse element is a null SML reference):

<Student xmlns="http://www.university.example.org/ns"
         xmlns:sml="http://www.w3.org/2008/09/sml"
         xmlns:u="http://www.university.example.org/ns">
    <ID>1000</ID>
    <Name>John Doe</Name>
    <EnrolledCourses>
        <EnrolledCourse sml:ref="true" sml:nilref="true">
            <Name>PHY101</Name>
            <Grade>A</Grade>
        </EnrolledCourse>
        <EnrolledCourse sml:ref="false">
            <Name>MAT100</Name>
            <Grade>B</Grade>
            <sml:uri>
                http://www.university.example.org/Universities/MIT/Courses.xml
                #smlxpath1(/u:Courses/u:Course[u:Name='MAT100'])
            </sml:uri>
        </EnrolledCourse>
        <EnrolledCourse>
            <Name>SocialSkills</Name>
            <Grade>F</Grade>
        </EnrolledCourse>
    </EnrolledCourses>
</Student>

In the above example, the first SML reference, EnrolledCourse, defines the sml:nilref="true" attribute which marks this as a null SML reference. By specifying a null reference, the document author makes an explicit declaration that this Student element does not refer to any target element. Specifying a null reference does not have any SML-defined effect on the interpretation of element in non-SML contexts. In particular, in this case, SML says nothing about the interpretation of the Grade and Name elements. Any such interpretation is left to the application, its usage context, other specifications, etc.

D. SML URI Reference Scheme Sample (Non-Normative)

The following example illustrates the use of the SML URI Reference Scheme [4.3.1 SML URI Reference Scheme]. Consider the case where all courses offered by MIT are stored in a single XML document – Courses.xml – whose URI is  http://www.university.example.org/Universities/MIT/Courses.xml. In this case, the element inside Courses.xml that corresponds to the course PHY101 can be referenced as follows (assuming that Coursesis the root element in Courses.xml)

<Student xmlns="http://www.university.example.org/ns">
    <ID>1000</ID>
    <Name>John Doe</Name>
    <EnrolledCourses>
        <EnrolledCourse sml:ref="true" xmlns:u="http://www.university.example.org/ns">
            <sml:uri>
                http://www.university.example.org/Universities/MIT/Courses.xml
                #smlxpath1(/u:Courses/u:Course[u:Name='PHY101'])
            </sml:uri>
        </EnrolledCourse>
    </EnrolledCourses>
</Student>

An SML reference can also reference an element in its own document. To see this consider the following instance document

<University xmlns="http://www.university.example.org/ns">
    <Name>MIT</Name>
    <Courses>
        <Course>
            <Name>PHY101</Name>
        </Course>
        <Course>
            <Name>MAT200</Name>
        </Course>
    </Courses>
    <Students>
        <Student>
            <ID>123</ID>
            <Name>Jane Doe</Name>
            <EnrolledCourses>
                <EnrolledCourse sml:ref="true" xmlns:u="http://www.university.example.org/ns">
                    <sml:uri>
                        #smlxpath1(/u:University/u:Courses/u:Course[u:Name='MAT200'])
                    </sml:uri>
                </EnrolledCourse>
            </EnrolledCourses>
        </Student>
    </Students>
</University>

Here, the EnrolledCourse element for the student Jane Doe references the Course element for MAT200 in the same document.

E. SML Identity Constraints Sample (Non-Normative)

The following example will be used to illustrate the sml:key, sml:unique, and sml:keyref constraints across SML references. This example consists of three schema documents. university.xsd contains the type definitions for a University element, a Student SML reference and a Course SML reference. students.xsd contains the type definitions for an EnrolledCourse SML reference and a Student element. courses.xsd contains the type definition for a Course element.

<!-- from university.xsd -->
<xs:complexType name="StudentRefType">
    <!-- SML reference to a Student -->
    <xs:sequence>
        <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
  
<xs:element name="Student" type="StudentRefType"/>

<xs:complexType name="CourseRefType">
    <!-- SML reference to a Course -->
    <xs:sequence>
        <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>

<xs:element name="Course" type="CourseRefType"/>

<xs:complexType name="UniversityType">
    <xs:sequence>
        <xs:element name="Name" type="xs:string"/>
        <xs:element name="Students" minOccurs="0">
        <xs:complexType>
            <xs:sequence>
              <xs:element ref="Student" maxOccurs="unbounded"/>
            </xs:sequence>
        </xs:complexType>
        </xs:element>
        <xs:element name="Courses" minOccurs="0">
        <xs:complexType>
            <xs:sequence>
              <xs:element ref="Course" maxOccurs="unbounded"/>
            </xs:sequence>
        </xs:complexType>
        </xs:element>
    </xs:sequence>
</xs:complexType>

<!-- from students.xsd -->
<xs:complexType name="EnrolledCourseRefType">
    <!-- SML reference to a Course -->
    <xs:sequence>
        <xs:element name="Grade" type="xs:string"/>
        <xs:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    <xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>

<xs:element name="EnrolledCourse" type="EnrolledCourseRefType"/>

<xs:complexType name="StudentType">
    <xs:sequence>
        <xs:element name="ID" type="xs:string"/>
        <xs:element name="SSN" type="xs:string" minOccurs="0"/>
        <xs:element name="Name" type="xs:string"/>
        <xs:element name="EnrolledCourses" minOccurs="0">
        <xs:complexType>
            <xs:sequence>
                <xs:element ref="EnrolledCourse" maxOccurs="unbounded"/>
            </xs:sequence>
        </xs:complexType>
        </xs:element>
    </xs:sequence>
</xs:complexType>

<xs:element name="Students">
    <xs:complexType>
        <xs:sequence>
            <xs:element name="Student" type="StudentType"/>
        </xs:sequence>
    </xs:complexType>
</xs:element>

<!-- from courses.xsd -->
<xs:complexType name="CourseType">
    <xs:sequence>
        <xs:element name="Name" type="xs:string"/>
        <xs:element name="EnrolledStudents" minOccurs="0">
        <xs:complexType>
            <xs:sequence>
                <xs:element name="EnrolledStudent" maxOccurs="unbounded">
                <xs:complexType>
                    <xs:sequence>
                        <xs:element name="StudentID" type="xs:string"/>
                    </xs:sequence>
                </xs:complexType>
                </xs:element>
            </xs:sequence>
        </xs:complexType>
        </xs:element>
    </xs:sequence>
</xs:complexType>

<xs:element name="Courses">
    <xs:complexType>
        <xs:sequence>
            <xs:element name="Course" type="CourseType"/>
        </xs:sequence>
    </xs:complexType>
</xs:element>

sml:key and sml:unique

XML Schema supports key and uniqueness constraints through xs:key and xs:unique, but these constraints can only be specified within a single XML document. The sml:key and sml:unique elements  support the specification of key and uniqueness constraints across documents.  We'll use the UniversityType definition to illustrate this concept. It is reasonable to expect that each student in a university must have a unique identity, and this identity must be specified. This can be expressed as follows:

<xs:element name="University" type="tns:UniversityType">
    <xs:annotation>
        <xs:appinfo>
            <sml:key name="StudentIDisKey">
                <sml:selector xpath="smlfn:deref(tns:Students/tns:Student)/tns:ID"/>
                <sml:field xpath="."/>  
            </sml:key>  
        </xs:appinfo>
    </xs:annotation>
</xs:element>

The sml:key and sml:unique constraints are similar but not the same. sml:key requires that the specified fields must be present in instance documents and have unique values, whereas sml:unique simply requires the specified fields to have unique values but does not require them to be present in instance documents.  Thus keys imply uniqueness, but uniqueness does not imply keys.  For example, students in a university must have a unique social security numbers, but the university may have foreign students who do not possess this number. This constraint can be specified as follows:

<xs:element name="University" type="tns:UniversityType">
    <xs:annotation>
        <xs:appinfo>
            <sml:unique name="StudentSSNisUnique">
                <sml:selector xpath="smlfn:deref(tns:Students/tns:Student)"/>
                <sml:field xpath="tns:SSN"/>  
            </sml:unique>  
        </xs:appinfo>
    </xs:annotation>
</xs:element>

The sml:key and sml:unique  constraint are always specified in the context of a scoping element. In the above example, the University element declaration is the context for the key and unique constraints.

The following example illustrates the use of the ref attribute in an SML identity constraint:

<xs:element name="PrivateUniversity" type="tns:UniversityType">
    <xs:annotation>
        <xs:appinfo>
            <sml:unique ref="tns:StudentSSNisUnique"/>
        </xs:appinfo>
    </xs:annotation>
</xs:element>

In the above example, the PrivateUniversity element declaration specifies the StudentSSNisUnique unique constraint by referencing its name in the University element declaration.

sml:keyref

XML Schema supports key references through xs:keyref to ensure that one set of values is a subset of another set of values within an XML document. Such constraints are similar to foreign keys in relational databases. Key references in XML Schema are only supported within a single XML document. The sml:keyref element allows key references to be specified across SML references and across XML documents. The following example uses sml:keyref to capture the requirement that students enrolled in a course must be currently enrolled in the university:

<xs:element name="University" type="tns:UniversityType">
    <xs:annotation>
        <xs:appinfo>
            <sml:key name="StudentIDisKey">
                <sml:selector xpath="smlfn:deref(tns:Students/tns:Student)"/>
                <sml:field xpath="tns:ID"/>  
            </sml:key>  
            <sml:keyref name="CourseStudents" refer="tns:StudentIDisKey">
                <sml:selector xpath="smlfn:deref(tns:Courses/tns:Course)/tns:EnrolledStudents/tns:EnrolledStudent"/>
                <sml:field xpath="tns:ID"/>
            </sml:keyref>
        </xs:appinfo>
    </xs:annotation>
</xs:element>

The above constraint specifies that for a university, the set of IDs of students enrolled in a course is a subset of the set of IDs of students currently enrolled in the university. In particular, the selector and field elements in StudentIDisKey key constraint identify the set of IDs of students currently enrolled in the university, and the selector and field elements in CourseStudents key reference constraint identify the set of IDs of students enrolled in courses.  

F. Localization and Variable Substitution Sample (Non-Normative)

In the following example, the sml:locid attribute is used to define the translation information for the Schematron sch:assert error message:

<sch:schema xmlns:sch="http://purl.oclc.org/dsdl/schematron"
            xmlns:lang="http://www.university.example.org/translation/">
  
    <sch:ns prefix="u" uri="http://www.university.example.org/ns" />
    <sch:ns prefix="smlfn" uri="http://www.w3.org/2008/09/sml-function"/>
    <sch:pattern id="StudentPattern”>
        <sch:rule context="u:Students/u:Student">
            <sch:assert test="smlfn:deref(.)[starts-with(u:ID,'99')]"
                        sml:locid="lang:StudentIDErrorMsg">
                The specified ID <sch:value-of select="string(u:ID)"/> does not begin with 99.
            </sch:assert>
        </sch:rule>
    </sch:pattern>
</sch:schema>

In this example, the {namespace name} URI information of the sml:locid attribute is used to define the location for the resource containing the translated text:

<xmlns:lang="http://www.university.example.org/translation/">

The {namespace name} URI can point to a file containing the translated message, a folder containing a set of translated files or any other type of resource that can help locate the translated message. It is implementation dependent how the model validator makes use of this information for finding the actual resource containing the translated message.

In this example, http://www.university.example.org/translation/ points to a folder containing a set of translation resources. For this specific example, there will be a set of translation files located under http://www.university.example.org/translation/. Each of these translation files will correspond to a language in which the messages have been translated. For this example, the translation is only available in French and German so there are only two files under http://www.university.example.org/translation/:

  1. http://www.university.example.org/translation/fr_lang.txt file contains the French translation of the sch:assert message.

  2. http://www.university.example.org/translation/de_lang.txt contains the German translation of the sch:assert message.

The {local part} information of the sml:locid attribute is used to define the identity of the message being translated. This information will be used to locate the translated text within the translation resource.

The file http://www.university.example.org/translation/fr_lang.txt contains the French translation of the sch:assert message, identified by StudentIDErrorMsg, which is the {local part} information of the sml:locid attribute:

StudentIDErrorMsg = L'identifieur specifie <sch:value-of select="string(u:ID)"/> ne commence pas par 99.

The file http://www.university.example.org/translation/de_lang.txt contains the German translation for the sch:assert message. The message is identified by StudentIDErrorMsg, which is the {local part} information of the sml:locid attribute:

StudentIDErrorMsg = Das angegebene Attributkennzeichen ID <sch:value-of select="string(u:ID)"/> beginnt nicht mit 99.

This example demonstrates how localization can be applied to a Schematron rule with the purpose of making the Schematron rule available to model processors using different languages. Summarized below are the benefits resulting from using the sml:locid localization support:

  1. The Schematron rule is language agnostic in the sense that the author does not have to be aware of the locale of a potential model processor. The Schematron rule is defined generically, to be consumed by any producer for which a translation file is made available at the location defined by the sml:locid {namespace name} URI.

  2. There is a clear separation between the translation process and the Schematron rule. There are no changes required to be applied to the Schematron rule when translations for other languages are made available. To support a new language, all that needs to be done is to add a new translation file under the location identified by the sml:locid {namespace name} URI.

Variable substitution support

There is often the case that a message can be reused in different sch:assert or sch:report situations. In the example above, the author of the Schematron rule may want to use this error message in other contexts:

The specified ID <sch:value-of select="string(u:ID)"/> does not begin with 99.

This is not possible since the translated message contains the context where the rule has been applied:

<sch:value-of select="string(u:ID)"/>

To be able to re-use this message, the schema author must be able to substitute u:ID in <sch:value-of select="u:ID "/> with some content that is appropriate for the context in which the message is used. In order to do that, the translation messages should substitute this context with a generic value.

StudentIDErrorMsg = L'identifieur specifie <sch:value-of select="string(u:ID)"/> ne commence pas par 99.
StudentIDErrorMsg = Das angegebene Attributkennzeichen ID <sch:value-of select="string(u:ID)"/> beginnt nicht mit 99.

In other words, instead of the messages shown above, the translation files should contain messages where the context of the Schematron rule is being replaced with a generic variable.

StudentIDErrorMsg = L'identifieur specifie <sch:value-of select="string($var)"/> ne commence pas par 99.
StudentIDErrorMsg = Das angegebene Attributkennzeichen ID <sch:value-of select="string($var)"/> beginnt nicht mit 99.

The error message in sch:assert identified by the lang:StudentIDErrorMsg value can now be reused in contexts other than the one described by the above sample.

The sample below shows how substitution variable support can be achieved on Schematron sch:assert messages by using xsl:variable support:

<sch:schema xmlns:sch="http://purl.oclc.org/dsdl/schematron"
            xmlns:lang="http://www.university.example.org/translation/">
    <sch:ns prefix="u" uri="http://www.university.example.org/ns" />
    <sch:ns prefix="smlfn" uri="http://www.w3.org/2008/09/sml-function"/>
    <sch:pattern id="StudentPattern”>
        <sch:rule context="u:Students/u:Student">
            <sch:assert test="smlfn:deref(.)[starts-with(u:ID,'99')]"
                        sml:locid="lang:StudentIDErrorMsg">
                <xsl:variable name="var” select=”u:ID” />
                The specified ID <sch:value-of select="string($var)"/> does not begin with 99.
            </sch:assert>
        </sch:rule>
    </sch:pattern>
</sch:schema>

The error message in sch:assert and the localization identifier lang:StudentIDErrorMsg can now be reused in contexts other than u:Students/u:Student.

G. Acknowledgements (Non-Normative)

The editors acknowledge the members of the Service Modeling Language Working Group, the members of other W3C Working Groups, and industry experts in other forums who have contributed directly or indirectly to the process or content of creating this document.

At the time this specification was published, the members of the Service Modeling Language Working Group were:

John Arwe (IBM Corporation), Pratul Dublish (Microsoft Corporation), Sandy Gao (IBM Corporation), Paul Lipton (CA), James Lynn (HP), Julia McCarthy (IBM Corporation), Kumar Pandit (Microsoft Corporation), Valentina Popescu (IBM Corporation), Virginia Smith (HP), Michael Sperberg-McQueen (W3C/MIT), David Whiteman (IBM Corporation), Kirk Wilson (CA), Yu Chen Zhou (IBM Corporation).

The Service Modeling Language Working Group has benefited in its work from the participation and contributions of a number of people not currently members of the Working Group, including in particular those named below.

Dave Ehnebuske (IBM), Jon Hass (Dell), Steve Jerman (Cisco), Heather Kreger (IBM), Vincent Kowalski (BMC), Milan Milenkovic (Intel), Bryan Murray (HP), Phil Prasek (HP), Junaid Saiyed (EMC), Harm Sluiman (IBM), Bassam Tabbara (Microsoft), Vijay Tewari (Intel), William Vambenepe (HP), Marv Waschke (CA), Andrea Westerinen (Microsoft).

Affiliations given above are those current at the time of their work with the working group.