Web Application Manifest

W3C Working Draft

More details about this document
This version:
https://www.w3.org/TR/2022/WD-appmanifest-20220217/
Latest published version:
https://www.w3.org/TR/appmanifest/
Latest editor's draft:
https://w3c.github.io/manifest/
History:
https://www.w3.org/standards/history/appmanifest
Commit history
Editors:
Marcos Cáceres (W3C)
Kenneth Rohde Christiansen (Intel Corporation)
Matt Giuca (Google Inc.)
Aaron Gustafson (Microsoft Corporation)
Daniel Murphy (Google Inc.)
Anssi Kostiainen (Intel Corporation)
Former editors:
Mounir Lamouri (Google Inc.)
Rob Dolin (Microsoft Corporation)
Feedback:
GitHub w3c/manifest (pull requests, new issue, open issues)
Browser support (caniuse.com):
  • 39–100
  • 4–38
  • 79–97
  • 12–18
  • 11.3–15.3
  • 3.2–11.2
More info

Abstract

This specification defines a JSON-based file format that provides developers with a centralized place to put metadata associated with a web application. This metadata includes, but is not limited to, the web application's name, links to icons, as well as the preferred URL to open when a user launches the web application. The manifest also allows developers to declare a default screen orientation for their web application, as well as providing the ability to set the display mode for the application (e.g., in fullscreen). Additionally, the manifest allows a developer to "scope" a web application to a URL. This restricts the URLs to which the manifest is applied and provides a means to "deep link" into a web application from other applications.

Using this metadata, user agents can provide developers with means to create user experiences that are more comparable to that of a native application.

Status of This Document

This section describes the status of this document at the time of its publication. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at https://www.w3.org/TR/.

Warning

This document was published by the Web Applications Working Group as a Working Draft using the Recommendation track.

Publication as a Working Draft does not imply endorsement by W3C and its Members.

This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

This document was produced by a group operating under the W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.

This document is governed by the 2 November 2021 W3C Process Document.

1. Web Application Manifest

A application manifest is a [JSON] document that contains startup parameters and application defaults for when a web application is launched.

A manifest has an associated manifest URL, which is the [URL] from which the manifest was fetched.

A manifest can have any of the following members at its root, all of which are optional. The members can appear in any order.

Note

1.1 Examples

This section is non-normative.

This section shows how developers can make use of the various features of this specification.

1.1.1 Typical structure

This section is non-normative.

The following shows a typical manifest.

Example 1: Typical manifest
{
  "lang": "en",
  "dir": "ltr",
  "name": "Super Racer 3000",
  "short_name": "Racer3K",
  "icons": [{
    "src": "icon/lowres.webp",
    "sizes": "64x64",
    "type": "image/webp"
  }, {
    "src": "icon/lowres.png",
    "sizes": "64x64"
  }, {
    "src": "icon/hd_hi",
    "sizes": "128x128"
  }],
  "scope": "/",
  "id": "superracer",
  "start_url": "/start.html",
  "display": "fullscreen",
  "orientation": "landscape",
  "theme_color": "aliceblue",
  "background_color": "red"
}

1.1.3 Declaring multiple icons

This section is non-normative.

In the following example, the developer has made the following choices about the icons associated with the web application:

  • The developer has included two icons at the same size, but in two different formats. One is explicitly marked as WebP through the type member. If the user agent doesn't support WebP, it falls back to the second icon of the same size. The MIME type of this icon can then be either determined via a HTTP header, or can be sniffed by the user agent once the first few bytes of the icon are received.
  • The developer wants to use an SVG for greater than or equal to 257x257px. They've found that the SVG file looks too blurry at small sizes, even on high-density screens. To deal with this problem, the developer includes an SVG icon that is only used when the dimensions are at least 257px. Otherwise, the user agent uses the ICO file (hd_hi.ico), which includes a gamut of raster icons individually tailored for small display sizes.
Example 3: Multiple icons
{
  "icons": [
    {
      "src": "icon/lowres.webp",
      "sizes": "48x48",
      "type": "image/webp"
    },{
      "src": "icon/lowres",
      "sizes": "48x48"
    },{
      "src": "icon/hd_hi.ico",
      "sizes": "72x72 96x96 128x128 256x256"
    },{
      "src": "icon/hd_hi.svg",
      "sizes": "257x257"
    }]
}

1.1.4 Creating shortcuts

This section is non-normative.

In the following example, the developer has included two shortcuts. Assuming the manifest's URL is https://example.com/manifest.webmanifest:

  • The first shortcut would be displayed with the text "Play Later". If the operating system supports icons for context menu items and it also supports SVG images for that purpose, the user agent would present https://example.com/icons/play-later.svg next to the text. When launched, the user agent would instantiate a new top-level browsing context and navigate to https://example.com/play-later.
  • The second shortcut would be displayed with the text "Subscriptions". When launched, the user agent would instantiate a new top-level browsing context and navigate to https://example.com/subscriptions?sort=desc.
Example 4: Adding shortcuts
{
  "shortcuts": [
    {
      "name": "Play Later",
      "description": "View the list of podcasts you saved for later",
      "url": "/play-later",
      "icons": [
        {
          "src": "/icons/play-later.svg",
          "type": "image/svg+xml"
        }
      ]
    },
    {
      "name": "Subscriptions",
      "description": "View the list of podcasts you listen to",
      "url": "/subscriptions?sort=desc"
    }
  ]
}

1.1.5 Understanding "scope"

This section is non-normative.

The scope member tells the browser which documents are part of a web application, and which are not - and hence, to which set of web pages the manifest is "applied" when the user navigates around a web site.

For example, {"scope": "/"} means that the manifest applies to every document in an origin. On the other hand, {"scope": "/racer/"} means that only documents within the path "/racer/" are within scope: so "/racer/race1.html", "/racer/race2.html", etc. would all be within scope, but "/elsewhere/" and anything at the root "/" would be "out of scope" and the manifest wouldn't apply to documents in those paths. Only one scope path is supported. See 6. Navigation scope for the technical details.

Applying a manifest means that any members that affect presentation found in the manifest will come into effect, such as display "fullscreen", or applying a particular screen orientation. As long as the application is navigated to URLs that are within scope, the browser will continue to apply the manifest. However, navigating the web applications "out of scope" will cause the manifest to no longer be applied, and the browser will apply its own defaults. This will cause, for example, the application to no longer be displayed in fullscreen, and instead be displayed as a regular web page in a browser tab. It's left up to implementers to decide how to deal with web pages being navigated in and out of scope. See 1.17.4 Applying the manifest for the technical details.

Finally, as it's possible that a user can install a web application from any document within an origin, it's good practice to always declare a scope member in a manifest. If the scope member is missing from the manifest, then the path of the start_url member is used as a fallback. And if the start_url member is also missing, then the document URL from which the web application is installed gets used as the scope. To be sure you don't get any unexpected navigation behavior, always include a scope member preferably set to "/".

1.2 dir member

The manifest's dir member specifies the base direction for the localizable members of the manifest. The dir member's value can be set to a text-direction.

The localizable members are:

The text-directions are the following, implying that the value of the localizable members is by default:

"ltr"
Left-to-right text.
"rtl"
Right-to-left text.
"auto" (default)
No explicit directionality.

The text-direction list is the list « "ltr", "rtl", "auto" ».

When displaying the localizable members to an end-user, the use agent SHOULD:

  1. If the base direction is ltr or rtl, override Rule P3 of [BIDI], setting the paragraph embedding level to 0 if the base direction is ltr, or 1 if the base direction is rtl.
  2. Otherwise the base direction is "auto", in which case determine the text's direction by applying Rule P1 of [BIDI].

To process the dir member, given ordered map json and ordered map manifest:

  1. If json["dir"] doesn't exist or if json["dir"] is not a string, return.
  2. If text-direction list doesn't contain json["dir"], return.
  3. Set manifest["dir"] to json["dir"].

1.3 lang member

The manifest's lang member is a string in the form of a language tag that specifies the primary language for the values of the manifest's localizable members (as knowing the language can also help with directionality).

A language tag is a string that matches the production of a Language-Tag defined in the [BCP47] specifications (see the IANA Language Subtag Registry for an authoritative list of possible values). That is, a language range is composed of one or more subtags that are delimited by a U+002D HYPHEN-MINUS ("-"). For example, the 'en-AU' language range represents English as spoken in Australia, and 'fr-CA' represents French as spoken in Canada. Language tags that meet the validity criteria of [RFC5646] section 2.2.9 that can be verified without reference to the IANA Language Subtag Registry are considered structurally valid.

To process the lang member, given ordered map json and ordered map manifest:

  1. If json["lang"] doesn't exist or if json["lang"] is not a string, return.
  2. If calling IsStructurallyValidLanguageTag with json["lang"] returns false, return.
  3. Set manifest["lang"] to the result of calling the CanonicalizeUnicodeLocaleId abstract operation with json["lang"].

1.4 name member

The manifest's name member is a string that represents the name of the web application as it is usually displayed to the user (e.g., amongst a list of other applications, or as a label for an icon).

The name member serves as the accessible name of an installed web application.

Note: Processing the `name` member

When processing a manifest, the process a text member algorithm is used to process the name member.

1.5 short_name member

The manifest's short_name member is a string that represents a short version of the name of the web application. It is intended to be used where there is insufficient space to display the full name of the web application.

Note: Processing the `short_name` member

When processing a manifest, the process a text member algorithm is used to process the short_name member.

1.6 scope member

The manifest's scope member is a string that represents the navigation scope of this web application's application context.

Note: Default scope

To process the scope member, given ordered map json and ordered map manifest:

  1. Set manifest["scope"] to the result of parsing "." with manifest["start_url"] as the base URL.
  2. If json["scope"] is the empty string, then return.
  3. Let scope be the result of parsing json["scope"] with manifest URL as the base URL.
  4. If scope is failure, return.
  5. From scope, remove the query and fragment components.
  6. If manifest["start_url"] is not within scope of scope, return.
  7. Otherwise, set manifest["scope"] to scope.

1.7 icons member

The manifest's icons member are images that serve as iconic representations of the web application in various contexts. For example, they can be used to represent the web application amongst a list of other applications, or to integrate the web application with an OS's task switcher and/or system preferences.

If there are multiple equally appropriate images in icons, a user agent MUST use the last one declared in order at the time that the user agent collected the list of icons. If the user agent tries to use an icon but that icon is determined, upon closer examination, to be inappropriate (e.g. because its content type is unsupported), then the user agent MUST try the next-most-appropriate icon as determined by examining the manifest image resource's members.

Note

1.8 display member

The manifest's display member represents the developer's preferred display mode for the web application. Its value is a display mode.

To process the display member, given ordered map json and ordered map manifest:

  1. If json["display"] doesn't exist or json["display"] is not a a string, return.
  2. If display modes list doesn't contain json["display"], return.
  3. Set manifest["display"] to json["display"].

1.9 orientation member

The manifest's orientation member is a string that serves as the default screen orientation for all top-level browsing contexts of the web application. The possible values are those of the OrientationLockType enum, which in this specification are referred to as the orientation values (i.e., "any", "natural", "landscape", "portrait", "portrait-primary", "portrait-secondary", "landscape-primary", or "landscape-secondary").

If the user agent supports the value of the orientation member as the default screen orientation, then that serves as the default screen orientation for the life of the web application (unless overridden by some other means at runtime). This means that the user agent MUST return the orientation to the default screen orientation any time the orientation is unlocked [SCREEN-ORIENTATION] or the top-level browsing context is navigated.

Note

Although the specification relies on the [SCREEN-ORIENTATION]'s OrientationLockType, it is OPTIONAL for a user agent to implement the [SCREEN-ORIENTATION] API. Supporting the [SCREEN-ORIENTATION] API is, of course, encouraged.

Certain UI/UX concerns and/or platform conventions will mean that some screen orientations and cannot be used together. Which orientations and display modes cannot be used together is left to the discretion of implementers. For example, for some user agents, it might not make sense to change the default screen orientation of an application while in browser display mode.

Note

Once the web application is running, other means can change the orientation of a top-level browsing context (such as via [SCREEN-ORIENTATION] API).

To process the orientation member, given ordered map json and ordered map manifest:

  1. If json["orientation"] doesn't exist or json["orientation"] is not a string, return.
  2. If json["orientation"] doesn't contain any of the orientation values, return.
  3. Set manifest["orientation"] to json["orientation"].

1.10 start_url member

The manifest's start_url member is a string that represents the start URL , which is URL that the developer would prefer the user agent load when the user launches the web application (e.g., when the user clicks on the icon of the web application from a device's application menu or homescreen).

The start_url member is purely advisory, and a user agent MAY ignore it or provide the end-user the choice not to make use of it. A user agent MAY also allow the end-user to modify the URL when, for instance, a bookmark for the web application is being created or any time thereafter.

To process the start_url member, given ordered map json, ordered map manifest, URL manifest URL, and URL document URL:

  1. If json["start_url"] doesn't exist or json["start_url"] is not a string, return.
  2. If the type of json["start_url"] is not string, or if json["start_url"] is the empty string, return.
  3. Let start URL be the result of parsing json["start_url"], using manifest URL as the base URL.
  4. If start URL is failure, return.
  5. If start URL is not same origin as document URL, return.
  6. Otherwise, set manifest["start_url"] to start URL.

1.10.1 Privacy consideration: start_url tracking

It's conceivable that the start_url could be crafted to indicate that the application was launched from outside the browser (e.g., "start_url": "index.html?launcher=homescreen"). This can be useful for analytics and possibly other customizations. However, it is also conceivable that developers could encode strings into the start_url that uniquely identify the user (e.g., a server assigned UUID). This is fingerprinting/privacy sensitive information that the user might not be aware of.

Given the above, it is RECOMMENDED that, upon installation, or any time thereafter, a user agent allows the user to inspect and, if necessary, modify the start URL of an application.

Additionally, developers MUST NOT use the start URL to include information that uniquely identifies a user (e.g., "?user=123" or "/user/123/", or "https://user123.foo.bar").

1.11 id member

The manifest's id member is a string that represents the identity for the application. The identity takes the form of a URL, which is same origin as the start URL.

The identity is used by user agents to uniquely identify the application universally. When the user agent sees a manifest with an identity that does not correspond to an already-installed application, it SHOULD treat that manifest as a description of a distinct application, even if it is served from the same URL as that of another application. When the user agent sees a manifest where manifest["id"] is equal with exclude fragment true to the identity of an already-installed application, it SHOULD be used as a signal that this manifest is a replacement for the already-installed application's manifest, and not a distinct application, even if it is served from a different URL than the one seen previously.

Note

The identity can be used by a service that collects lists of web applications to uniquely identify applications.

Note

The identity is processed like a URL but it doesn't point to a resource that can be navigated to, so it's not required to be within scope.

To process the id member, given object json, ordered map manifest:

  1. Set manifest["id"] to manifest["start_url"].
  2. If the type of json["id"] is not string, return.
  3. If json["id"] is the empty string, return.
  4. Let base origin be manifest["start_url"]'s origin.
  5. Let id be the result of parsing json["id"] with base origin as the base URL.
  6. If id is failure, return.
  7. If id is not same origin as manifest["start_url"], return.
  8. Set manifest["id"] to id.

1.12 theme_color member

The manifest's theme_color member serves as the default theme color for an application context. What constitutes a theme color is defined in [HTML].

If the user agent honors the value of the theme_color member as the default theme color, then that color serves as the theme color for all browsing contexts to which the manifest is applied. However, a document may override the default theme color through the inclusion of a valid [HTML] meta element whose name attribute value is "theme-color".

The user agent MAY ignore the theme color's alpha component based on the context. For example, in most environments, the theme color cannot be transparent.

Implementors MAY override the value defined by the theme_color member to support prefers-color-scheme.

Note

When processing a manifest, the process a color member algorithm is used to process the theme_color member.

1.15 background_color member

The manifest's background_color member describes the expected background color of the web application. It repeats what is already available in the application stylesheet but can be used by the user agent to draw the background color of a web application for which the manifest is known before the files are actually available, whether they are fetched from the network or retrieved from disk.

The background_color member is only meant to improve the user experience while a web application is loading and MUST NOT be used by the user agent as the background color when the web application's stylesheet is available.

Implementors MAY override the value defined by the background_color member to support prefers-color-scheme.

Note

When processing a manifest, the process a color member algorithm is used to process background_color member.

1.16 shortcuts member

The manifest's shortcuts member is an list of shortcut items that provide access to key tasks within a web application.

Note

How shortcuts are presented, and how many of them are shown to the user, is at the discretion of the user agent and/or operating system.

To process the shortcuts member, given ordered map json, ordered map manifest, and URL manifest URL:

  1. Let processedShortcuts be a new list.
  2. Set manifest["shortcuts"] to processedShortcuts.
  3. If json["shortcuts"] doesn't exist or json["shortcuts"] is not a list, return.
  4. For each entry of json["shortcuts"]:
    1. Let shortcut be process a shortcut with entry.
    2. If shortcut is failure, continue.
    3. Append shortcut to processedShortcuts.

A user agent SHOULD expose shortcuts via interactions that are consistent with exposure of an application icon's context menu in the host operating system (e.g., right click, long press). A user agent SHOULD render the shortcuts in the same order as they are provided in the manifest. A user agent SHOULD represent the shortcuts in a manner consistent with exposure of an application icon's context menu in the host operating system. A user agent MAY truncate the list of shortcuts presented in order to remain consistent with the conventions or limitations of the host operating system.

1.17 Manifest life-cycle

This section defines algorithms for processing a manifest, and applying a manifest.

A user agent MUST support the link type "manifest" and the associated steps for how to fetch and process the linked resource.

1.17.1 Processing the manifest

When instructed to ignore, the user agent MUST act as if whatever manifest, member, or value caused the condition is absent.

The following algorithm provides an processing extension-point: other specifications that add new members to the manifest are encouraged to hook themselves into this specification at this point in the algorithm. They SHOULD NOT modify the existing values already in the manifest object.

The steps for processing a manifest are given by the following algorithm. The algorithm takes link el and a Response response.

  1. Let document URL be el's node document's URL.
  2. Assert: document URL is not null.
  3. Let json be the result of parse JSON bytes to an Infra value passing response's body.
  4. If the json is a parsing exception, or json is not an ordered map:
    1. Set json to an empty ordered map.
  5. Let manifest be a new ordered map «[ "display" → "browser", "dir" → "auto", "start_url" → document URL ]».
  6. Process the dir member passing json and manifest.
  7. Process the lang member passing json and manifest.
  8. For each member of list « "name", "short_name" »:
    1. Process a text member passing json, manifest, and member.
  9. Process a text member passing json, manifest, and "short_name".
  10. Let manifest URL be response's URL.
  11. Process the start_url member passing json, manifest, manifest URL, and document URL.
  12. Process the id member passing json, manifest and document URL.
  13. If the document's processed manifest is not null, and document's processed manifest's id is not equal with exclude fragment true to manifest["id"], return.
  14. Process the scope member passing json, manifest, and manifest URL.
  15. For each member of list « "theme_color", "background_color" »:
    1. Process a color member passing json, manifest, and member.
  16. Process the display member passing json and manifest.
  17. Process image resources passing json["icons"], manifest, manifest URL, and "icons".
  18. Process the orientation member passing json, manifest.
  19. Process the related_applications member passing json and manifest.
  20. Process the shortcuts member passing json, manifest, and manifest URL.
  21. Processing extension-point: process any proprietary and/or other supported members at this point in the algorithm.
  22. Let document's processed manifest be manifest.

1.17.2 Processing color members

Note: Supported colors

Only sRGB colors, and colors the user agent can convert to sRGB without any outside knowledge (e.g., "AliceBlue"), are supported. For example, lab(…) or color(display-p3, …) can be converted to sRGB without outside knowledge, but color(--custom-profile, …) would require finding a matching "@color-profile" rule which cannot be specified in the manifest.

To process a color member, using ordered map json, ordered map map, and string member:

  1. If json[member] doesn't exist or json[member] is not a string, return.
  2. Let color be the result of parsing the value of json[member] as a CSS color.
  3. If color is failure, return.
  4. If color can be converted to sRGB using solely information the user agent inherently knows, then convert color to sRGB.
  5. If color is not sRGB color, return.
  6. Set map[member] to color.

1.17.3 Processing text members

To process a text member, given ordered map json, ordered map map, and string member:

  1. If json[member] doesn't exists or json[member] is not a string, return.
  2. Set map[member] to the value of json[member].

1.17.4 Applying the manifest

A processed manifest is applied to a top-level browsing context, meaning that the members of the processed manifest are affecting the presentation or behavior of a browsing context.

A top-level browsing context that has a manifest applied to it is referred to as an application context.

If an application context is created as a result of the user agent being asked to navigate to a deep link, the user agent MUST immediately navigate to the deep link with historyHandling set to "replace". Otherwise, when the application context is created, the user agent MUST immediately navigate to the start URL with historyHandling set to "replace".

Note

The appropriate time to apply a manifest is when the application context is created and before navigation to the start URL begins.

1.17.5 Updating the manifest

As specified for manifest link relation, the manifest is fetched and processed on every page load. When the processing a manifest is successful, user agents MAY apply updated manifest to any current and future application contexts associated with the application.

For the purpose of updating, the following member are security-sensitive members, as they are presented during installation and on launch surfaces:

  1. short_name,
  2. icons
  3. name,

User agents SHOULD NOT automatically apply changes to security-sensitive members without express permission from the user.

Instead, user agents SHOULD present changes to security-sensitive members with appropriate management options, so the user can make an informed decision about updating the web application.

The user agent MAY automatically apply the changes if the update does not contain changes to security-sensitive members.

Note: A user agent will not apply a partial update

2. Manifest image resources

Each manifest image resource is an image resource that is conceptually part of a web application, suitable to use in various contexts depending on the semantics of the member that is using the object (e.g., an icon that is part of an application menu, etc.).

A manifest image resource differs from a image resource in that it can have an additional purpose member.

User agents MAY modify the images associated with an manifest image resource to better match the platform’s visual style before displaying it to the user, for example by rounding the corners or painting it in a specific color. It is recommended that developers prepare their image resources for such scenarios to avoid losing important information through, e.g., change of color or clipped corners.

2.1 purpose member

The purpose member is an unordered set of unique space-separated tokens. The allowed values are the icon purposes.

When a manifest image resource is used as an icon, a developer can hint that the image is intended to serve some special purpose in the context of the host OS (i.e., for better integration). User agents SHOULD NOT use an icon other than for its stated icon purpose.

Note

For example, an icon with purpose "monochrome" could be used as a badge or pinned icon with a solid fill, visually distinct from an application's full color launch icon. The user agent uses the value of the purpose member as a hint to determine where and how an purpose is displayed. Unless declared otherwise by the developer, a user agent can use an icon for any purpose.

The icon purposes are as follows:

monochrome
A user agent can present this icon where a monochrome icon with a solid fill is needed. The color information in the icon is discarded and only the alpha data is used. The icon can then be used by the user agent like a mask over any solid fill.
maskable
The image is designed with icon masks and safe zone in mind, such that any part of the image that is outside the safe zone can safely be ignored and masked away by the user agent.
any (default)
The user agent is free to display the icon in any context.

The icon purposes list is the list « "monochrome", "maskable", "any" ».

Note

If an icon contains multiple purposes, it could be used for any of those purposes. If none of the stated purposes are recognized, the icon is totally ignored. For example, if an icon has purpose "monochrome fizzbuzz", then it could be used as a monochrome icon, as "monochrome" is a valid purpose. However, if an icon just has the purpose "fizzbuzz", then it will be ignored.

To determine the purpose of an image, given ordered map json:

  1. If json["purpose"] doesn't exist or if json["purpose"] is not a string:
    1. Return set « "any" ».
  2. Let keywords be the result of split on ASCII whitespace json["purpose"].
  3. Let purposes be new set.
  4. For each keyword of keywords:
    1. If icon purposes list doesn't contain keyword, then continue.
    2. Otherwise, append keyword to purposes.
  5. If purposes is empty, then return failure.
  6. Return purposes.

2.2 Content security policy

The security policy that governs whether a user agent can fetch an icon image is governed by the img-src directive [CSP3] associated with the manifest's owner Document.

2.3 Icon masks and safe zone

Some platforms have their own preferred icon shape, but as web applications should work across multiple platforms, it is possible to indicate that an icon can have a user-agent-specified mask applied by adding the maskable purpose. This allows the platform to ensure that the icon looks well integrated with the platform, and even apply different masks and background colors in different places throughout the platform.

The safe zone is the area within a maskable icon which is guaranteed to always be visible, regardless of user agent preferences. It is defined as a circle with center point in the center of the icon and with a radius of 2/5 (40%) of the icon size, which means the smaller of the icon width and height, in case the icon is not square.

Note

Designers of maskable icons will want to make sure that all important parts are within the safe zone.

safe zone illustrated
Figure 1 The safe zone is a centrally positioned circle, with radius 2/5 (40%) of the minimum of the icon's width and height.

All pixels in this zone are guaranteed to be seen in all masks. Pixels outside the safe zone are not guaranteed to (but can) be visible depending on the applied mask.

The user agent MAY apply a mask of any size, making any pixels that are more than 2/5ths of the image size (minimum of width and height if non-square) away from the center (the safe zone) transparent.

The user agent MUST NOT make any pixel within the safe zone transparent.

The user agent MAY enlarge the icon by adding additional padding.

If the icon contains transparent pixels, the user agent MUST composite the icon onto a solid fill (e.g., white) of the user agent's choice.

Note

It is suggested that designers avoid using transparent pixels in maskable icons.

2.3.1 Examples of masks

Note

By staying inside the safe zone, most icons will have around 10% padding on the top, bottom, right and left with no content or non-essential content, such as an icon background. It is suggested that developers check their icon when all but the safe zone is masked out.

2.3.1.1 Icons with "maskable" purpose
An icon over a checkerboard background
Figure 2 Image The base image with transparent background
An icon in a purple circle (40% of the size) over a yellow background
Figure 3 Safe zone Circle with radius 2/5 (40%) of the icon size
2.3.1.2 Mask examples
An icon inside a rounded yellow square on a purple background
Figure 4 Rounded square Android
An icon inside an extremely rounded yellow square on a purple background
Figure 5 Squircle Android
An icon inside a rounded yellow circle on a purple background
Figure 6 Circle Android
An icon inside a somewhat rounded yellow square on a purple background
Figure 7 Rounded square iOS
An icon on a yellow background
Figure 8 Fullbleed Windows

2.4 Monochrome icons and solid fills

(Feature at Risk) Issue 905: badge purpose "monochrome" is only supported by Firefox

As the badge purpose "monochrome" is only supported by Firefox, it is at risk of being removed from the specification. Implementers should express interest in supporting this feature if they would like it to remain in the specification.

Some platforms enforce that icons be displayed with a solid fill such as a single color, where only the transparency of the icon can be declared in a manifest. As web applications need to work across multiple platforms, it is possible to indicate that an icon can have an user-agent-specified color applied by adding the monochrome purpose. This allows the platform to ensure that the icon looks well integrated with the platform, and even apply different colors and padding in different places throughout the platform.

When presenting a monochrome icon, the user agent MUST NOT independently display the red component, green component, or blue component of a pixel. The user agent SHOULD display each pixel with its original alpha value, but with a red, green, and blue value of the user agent's choosing. It is RECOMMENDED that the user agent use the same color value for all pixels.

Note

Designers of monochrome icons could set all pixels to black and only use transparency to create a silhouette of their icon.

The user agent MAY enlarge the icon by adding additional padding.

The user agent MAY add a background of any color behind transparent pixels, and SHOULD ensure that the background has sufficient contrast with the icon.

2.4.1 Example usage of monochrome icons

2.4.1.1 Usage examples
A black icon over a checkerboard background
Figure 9 Image The base image with no color.
A dark gradient icon over a checkerboard background
Figure 10 Gradient fill The image filled in with a gradient.
A dark yellow icon over a light gray background
Figure 11 Solid color fill with padding Filled in with the theme color from the manifest.

2.5 Processing image resources

To process image resources, given list images, ordered map map, manifest URL and string member:

  1. Let imageResources be a new list.
  2. Set map[member] to imageResources.
  3. If images is not list, return.
  4. For each potential image of images:
    1. Let image be the result of running process an image resource from JSON given potential image and manifest URL.
    2. If image is failure, continue.
    3. Let purposes be determine the purpose of an image passing potential image.
    4. If purposes is failure, continue.
    5. Set image["purpose"] to purposes.
    6. Append image to imageResources.

3. Shortcut items

Each shortcut item is an ordered map that represents a link to a key task or page within a web app. It has the following members:

A user agent can use these members to assemble a context menu to be displayed by the operating system when a user engages with the web app's icon. When the user invokes a shortcut from the operating system menu, the user agent SHOULD run launching a shortcut.

3.1 name member

The shortcut item's name member is a string that represents the name of the shortcut as it is usually displayed to the user in a context menu.

3.2 short_name member

The shortcut item's short_name member is a string that represents a short version of the name of the shortcut. It is intended to be used where there is insufficient space to display the full name of the shortcut.

3.3 description member

The shortcut item's description member is a string that allows the developer to describe the purpose of the shortcut. User agents MAY expose this information to assistive technology.

3.4 url member

The shortcut item's url member is a URL within scope of a processed manifest that opens when the associated shortcut is activated.

3.5 icons member

The shortcut item's icons member lists images that serve as iconic representations of the shortcut in various contexts.

3.6 Launching a shortcut

When shortcut item shortcut having manifest is invoked, run the following steps:

  1. Let url be shortcut.url.
  2. Let browsing context be the result of creating a new top-level browsing context.
  3. Navigate browsing context to url.

3.7 Processing shortcut items

To process a shortcut, given ordered map item:

  1. Return failure if it's the case that:
    • item is not ordered map.
    • item["name"] doesn't exist.
    • item["name"] is the empty string.
    • item["url"] doesn't exist.
    • item["url"] is not a string.
  2. Let url be the result of parsing item["url"] with manifest URL as the base URL.
  3. If url is failure, return failure.
  4. If url is not within scope of manifest URL, return failure.
  5. Let shortcut be ordered map «[ "url" → url, "name" → item["name"] ]».
  6. Process image resources passing item["icons"], shortcut, manifest URL, and "icons".
  7. Return shortcut.

4. External application resource

(Feature at Risk) Issue 956: related_applications is single engine feature

The related_applications member of this specification currently only has a single implementation. As such, it has been marked "at risk" as per the W3C Process, meaning that:

[The feature] may be removed before advancement to Proposed Recommendation without a requirement to publish a new Candidate Recommendation.

The Web Apps Working Group is seeking a second implementation in order to keep this feature in the specification.

Each external application resource represents an application related to the web application.

An external application resource can have the following members, some of which are required to be a valid external application resource:

A valid external application resource MUST have platform member, and either an url or an id member (or both).

4.1 platform member

The platform member represents the platform this external application resource is associated with. A platform represents a software distribution ecosystem or possibly an operating system. This specification does not define the particular values for the platform member.

4.2 url member

An external application resource's url member is the URL where the application can be found.

To process the url member of an application:

  1. If application URL is missing, return null.
  2. Otherwise, parse application URL and if the result is not failure, return the result. Otherwise return null.

4.3 id member

An external application resource's id member represents the id which is used to represent the application on the platform.

4.4 min_version member

An external application resource's min_version member represents the minimum version of the application that is considered related to this web app. This version is a string with platform-specific syntax and semantics.

4.5 fingerprints member

An external application resource's fingerprints member represents an list of fingerprints.

A fingerprint represents a set of cryptographic fingerprints used for verifying the application. A fingerprint has the following two members: type and value. Each of these are strings, but their syntax and semantics are platform-defined.

5. Installable web applications

A common use case of a manifest is for a user agent to install a web application; whereby the user agent provides the end-user with a means of instantiating a new top-level browsing context that has the manifest's members applied to it. A web application that is installed is known as a installed web application. That is, the manifest's members, or their defaults, are in effect on the top-level browsing context. This distinguishes an installed web application from a traditional bookmark, as opening a web page from a traditional bookmark will not have the manifest's properties applied to it.

For example, on user agents that support installation, a web application could be presented and launched in a way that, to the end-user, is indistinguishable from native applications: such as appearing as a labeled icon on the home screen, launcher, or start menu. When launched, the manifest is applied by the user agent to the top-level browsing context prior to the start URL being loaded. This gives the user agent an opportunity to apply the relevant values of the manifest, possibly changing the display mode and screen orientation of the web application. Alternatively, and again as an example, the user agent could install the web application into a list of bookmarks within the user agent itself.

5.1 Application's name

The application's name is derived from either the name member or short_name member.

When either the name member or the short_name member is missing, empty, or the wrong type, a user agent MAY use the name member as a fallback for the short_name member or short_name member as the fallback for the name member.

If the name and short_name members are missing, empty, or the wrong type, a user agent MAY fallback to the Document to find suitable replacements for missing manifest members (e.g., using application-name in place of name or short_name). Alternatively, the user agent SHOULD assign a default name (e.g., "Untitled") that follows platform conventions. Alternatively, a user agent MAY allow the end-user to input some text that can serve as the application's name.

When both the name and short_name members are present, it is left up to implementations to decide which member is best suited for the space available (e.g., the short_name member might be better suited for the space available underneath an icon).

5.2 Privacy and security considerations

It is RECOMMENDED that UI that affords the end user the ability to install a web application also allows inspecting the icon, name, start URL, origin, etc. pertaining to a web application. This is to give an end-user an opportunity to make a conscious decision to approve, and possibly modify, the information pertaining to the web application before installing it. This also gives the end-user an opportunity to discern if the web application is spoofing another web application, by, for example, using an unexpected icon or name.

It is RECOMMENDED that user agents prevent other applications from determining which applications are installed on the system (e.g., via a timing attack on the user agent's cache). This could be done by, for example, invalidating from the user agent's cache the resources linked to from the manifest (for example, icons) after a web application is installed - or by using an entirely different cache from that used for regular web browsing.

5.3 Uninstallation

User agents SHOULD provide a mechanism for the user to remove an installed web application application.

It is RECOMMENDED that at the time of removal, the user agent also present the user with an opportunity to revoke other persistent data and settings associated with the application, such as permissions and persistent storage.

7. Choosing a display mode

A display mode, as defined in [MEDIAQUERIES-5], represents how the web application is being presented within the context of an OS (e.g., in fullscreen, etc.). Display modes correspond to user interface (UI) metaphors and functionality in use on a given platform.

Once a user agent applies a particular display mode to an application context, it becomes the default display mode for the top-level browsing context (i.e., it is used as the display mode when the window is navigated). The user agent MAY override the default display mode for security reasons (e.g., the top-level browsing context is navigated to another origin) and/or the user agent MAY provide the user with a means of switching to another display mode.

When the display member is missing, or if there is no valid display member, the user agent uses the browser display mode as the default display mode. As such, the user agent MUST support the browser display mode.

Every display mode has a fallback chain, which is a list of display modes. The fallback chain for:

  1. browser is «».
  2. minimal-ui is « "browser" ».
  3. standalone is « "minimal-ui", "browser" ».
  4. fullscreen is « "standalone", "minimal-ui", "browser" ».

The steps for determining the web app's chosen display mode is given by the following algorithm. The algorithm takes a processed manifest manifest and returns a display mode.

  1. processing extension-point: process any proprietary and/or other supported display modes at this point in the algorithm.
  2. If the user agent supports manifest["display"], then return manifest["display"].
  3. For each fallback_mode of the fallback chain of manifest["display"]:
    1. If the user agent supports the fallback_mode, then return fallback_mode.
Note

The above loop is guaranteed to return a value before the assertion, due to the fact that browser is in every mode's fallback chain, and the requirement that all user agents support the browser display mode.

The display modes list is the list « "fullscreen", "standalone", "minimal-ui", "browser" ».

A user agent MUST reflect the applied display mode of the web application in the 'display-mode' media feature [MEDIAQUERIES-5].

Note

A user agent will expose the 'display-mode' media feature irrespective of whether a manifest is being applied to a browsing context. For example, if the end-user puts the application into fullscreen, then the user agent would reflect this change to CSS and scripts via the 'display-mode' media feature.

8. Privacy and security considerations

This specification does not directly deal with high-value data. However, installed web applications and their data could be seen as "high value" (particularly from a privacy perspective).

As the manifest format is JSON and will commonly be encoded using [UNICODE], the security considerations described in [JSON] and [UNICODE-SECURITY] apply. In addition, because there is no way to prevent developers from including custom/unrestrained data in a manifest, implementors need to impose their own implementation-specific limits on the values of otherwise unconstrained member types, e.g. to prevent denial of service attacks, to guard against running out of memory, or to work around platform-specific limitations.

Web applications will generally contain ECMAScript, HTML, CSS files, and other media, which are executed in a sand-boxed environment. As such, implementors need to be aware of the security implications for the types they support. Specifically, implementors need to consider the security implications outlined in at least the following specifications: [CSS-MIME], [ECMAScript-MIME], [HTML].

As web applications can contain content that is able to simultaneously interact with the local device and a remote host, implementors need to consider the privacy implications resulting from exposing private information to a remote host. Mitigation and in-depth defensive measures are an implementation responsibility and not prescribed by this specification. However, in designing these measures, implementors are advised to enable user awareness of information sharing, and to provide easy access to interfaces that enable revocation of permissions.

As this specification allows for the declaration of URLs within certain members of a manifest, implementors need to consider the security considerations discussed in the [URL] specification. Implementations intending to display IRIs and IDNA addresses found in the manifest are strongly encouraged to follow the security advice given in [UNICODE-SECURITY].

Developers need to be aware of the security considerations discussed throughout the [CSP3] specification, particularly in relation to making data: a valid source for the purpose of inlining a manifest. Doing so can enable XSS attacks by allowing a manifest to be included directly in the document itself; this is best avoided completely.

It is RECOMMENDED that UI that affords the end user the ability to install a web application also allows inspecting the icon, name, start URL, origin, etc. pertaining to a web application. This is to give an end-user an opportunity to make a conscious decision to approve, and possibly modify, the information pertaining to the web application before installing it. This also gives the end-user an opportunity to discern if the web application is spoofing another web application, by, for example, using an unexpected icon or name.

It is RECOMMENDED that user agents prevent other applications from determining which applications are installed on the system (e.g., via a timing attack on the user agent's cache). This could be done by, for example, invalidating from the user agent's cache the resources linked to from the manifest (for example, icons) after a web application is installed - or by using an entirely different cache from that used for regular web browsing.

It's conceivable that a shortcut url could be crafted to indicate that the application was launched from outside the browser (e.g., "url": "/task/?from=homescreen"). It is also conceivable that developers could encode strings into the url that uniquely identify the user (e.g., a server assigned UUID). This is fingerprinting/privacy sensitive information that the user might not be aware of.

When the web application is running, it is RECOMMENDED that the user agent provides the end-user a means to access common information about the web application, such as the origin, start and/or current URL, granted permissions, and associated icon. How such information is exposed to end-users is left up to implementers.

Additionally, when applying a manifest that sets the display mode to anything except "browser", it is RECOMMENDED that the user agent clearly indicate to the end-user that their are leaving the normal browsing context of a web browser. Ideally, launching or switching to a web application is performed in a manner that is consistent with launching or switching to other applications in the host platform. For example, a long and obvious animated transition, or speaking the text "Launching application X".

The display member allows an origin some measure of control over a user agent’s native UI. After taking over the full screen, it could attempt to mimic the user interface of another application. This is also facilitated by the 'display-mode' media feature [MEDIAQUERIES-5], through which a script can know the display mode of a web application.

A. IANA considerations

The mime type application/manifest+json is the application manifest media type. Both the mime type and the .webmanifest file extension are registered with the Internet Assigned Numbers Authority (IANA).

A.1 Media type registration

If the protocol over which the manifest is transferred supports the [MIME-TYPES] specification (e.g. HTTP), it is RECOMMENDED that the manifest be labeled with the application manifest media type.

Type name:
application
Subtype name:
manifest+json
Required parameters:
N/A
Optional parameters:
N/A
Encoding considerations:
Same as for application/json ([RFC7159] section 8.1)
Privacy and security considerations:
See 8. Privacy and security considerations.
Applications that use this MIME type:
Web browsers
Additional information:
Magic number(s):
N/A
File extension(s):
.webmanifest
Macintosh file type code(s):
TEXT
Person & email address to contact for further information:
The Web Applications Working Group can be contacted at public-webapps@w3.org.
Intended usage:
COMMON
Restrictions on usage:
none
Author:
W3C's Web Applications Working Group.
Change controller:
W3C.

B. Conformance

As well as sections marked as non-normative, all authoring guidelines, diagrams, examples, and notes in this specification are non-normative. Everything else in this specification is normative.

The key words MAY, MUST, MUST NOT, OPTIONAL, RECOMMENDED, SHOULD, and SHOULD NOT in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

There is only one class of product that can claim conformance to this specification: a user agent.

Note

Although this specification is primarily targeted at web browsers, it is feasible that other software could also implement this specification in a conforming manner. For instance, search engines, or crawlers, could find and process manifests to build up catalogs of sites that potentially work as installable web applications.

B.1 Extensibility

This section is non-normative.

This specification is designed to be extensible. Other specifications are encouraged to define new members for the manifest. However, in doing so, please follow the conventions used in this specification. In particular, use the processing extension-point to hook into the steps for processing a manifest. Also, be sure to specify the steps for processing your particular member in the manner set forth in this specification. This will help keep this part of the platform consistent.

To allow the community to easily find extensions, please add your extensions to the Extensions Registry.

When specifying a new member, don't override or monkey patch anything defined in this specification. Also, don't assume your member will be processed before or after any other member. Keep your new member, and its processing, atomic and self contained. Note also that implementations are free to ignore any member they do not recognize or support.

If you are writing a specification and temporarily want to patch this specification to help implementations along, file a bug so the community is informed of what you are trying to do.

B.1.1 Proprietary manifest members

This section is non-normative.

Although proprietary extensions are undesirable, they can't realistically be avoided. As such, the RECOMMENDED way to add a new proprietary manifest member as an extension is to use a vendor prefix.

We encourage implementors to add proprietary extensions to our Extensions Registry. This allows the community to track what extensions vendors and/or the web community have defined and documented. Periodically, we will consider those extensions for standardization.

The following is an example of three hypothetical vendor extensions.

Example 10: Vendor extensions
{
  ...
  "webkit_fancy_feature": "some/url/img",
  "moz_awesome_thing": { ... },
  "vendor_example_site_verification": "KEY_9864D0966935"
  ...
}

C. Incubations

This section is non-normative.

Extensions to this specification are being incubated in parallel by the Web Community, some of which are shipping in multiple browsers. If two or more browser engines end up supporting an incubated feature, then those features will become part of this specification in the future - allowing them to become a standard the Web Platform:

BeforeInstallPrompt and window.onappinstalled event
The BeforeInstallPrompt event and window.onappinstalled event were originally part of this specification. However, they were removed from the specification because they did not have support from two or more implementers. You can now find them in the BeforeInstallPrompt event and window.onappinstalled repository at the WICG.
share_target member
The share_target member registers a web application as "target" for share actions (e.g., for sharing a text, a URL, or a file). The share_target member is part of the Web Share Target specification, being incubated at the WICG.

D. Application Information

This section is non-normative.

Several members of the Web App Manifest provide additional metadata related to how the web application may be presented in the context of a digital storefront, installation dialog, or other surfaces where the web application may be marketed or distributed. In an effort to support these use cases better, the following members have been moved into Web App Manifest - Application Information:

F. JSON Schema

This section is non-normative.

Developers interested in validating manifest documents can find an unofficial JSON schema for the manifest format at schemastore.org. It is licensed under Apache 2.0. It is kindly maintained by Mads Kristensen. If you find any issues with the JSON schema, please file a bug at the SchemaStore repository on GitHub.

Note: Web Manifest JSON Schema

G. Internationalization

This section is non-normative.

It is expected that authors will localize the content of a manifest by using one of the following options:

Dynamically setting the language:
This can include, for instance, asking the end-user what their preferred language is and dynamically adding or replacing the manifest link relationship to the document based on that language preference (e.g., using a URL like "manifest.php?lang=fr").
Using content-negotiation, or geotargeting, etc. on the server:
The server that hosts the web application could attempt to predetermine the end-user's language by using geotargeting or by using content negotiation (e.g., using [RFC7540]'s "Accept-Language" header, or even a custom HTTP header).

Given the options above, developers need to be mindful of the end-user's privacy with respect to their preferred language: When the end-user has explicitly indicated their language preference to a web application (i.e., when not just using the user-agent default language settings), sending the end-user's preferred language in the clear over the wire is generally not OK. Doing so would reveal personal information about an end-user. As such, developers are encouraged to use [TLS] to reduce the chances of pervasive monitoring of their Web applications [RFC7258].

H. Use Cases and Requirements

This document attempts to address the Use Cases and Requirements for Installable Web Apps.

I. Issue summary

J. Change log

This section is non-normative.

The following are some significant changes that were made since First Public Working Draft:

K. Acknowledgements

This section is non-normative.

This document reuses text from the [HTML] specification, as permitted by the license of that specification.

Dave Raggett and Dominique Hazael-Massieux contributed to this specification via the HTML5Apps project.

Claudio Gomboli for icon example images.

Indiana University Bloomington security researchers have contributed to this specification by reporting potential risks related to out-of-scope navigation.

L. Index

L.1 Terms defined by this specification

L.2 Terms defined by reference

M. References

M.1 Normative references

[accname-1.2]
Accessible Name and Description Computation 1.2. Bryan Garaventa; Joanmarie Diggs; Michael Cooper. W3C. 11 July 2019. W3C Working Draft. URL: https://www.w3.org/TR/accname-1.2/
[BCP47]
Tags for Identifying Languages. A. Phillips, Ed.; M. Davis, Ed.. IETF. September 2009. Best Current Practice. URL: https://www.rfc-editor.org/rfc/rfc5646
[BIDI]
Unicode Bidirectional Algorithm. Mark Davis; Aharon Lanin; Andrew Glass. Unicode Consortium. 27 August 2021. Unicode Standard Annex #9. URL: https://www.unicode.org/reports/tr9/tr9-44.html
[CSP3]
Content Security Policy Level 3. Mike West. W3C. 29 June 2021. W3C Working Draft. URL: https://www.w3.org/TR/CSP3/
[css-color-4]
CSS Color Module Level 4. Tab Atkins Jr.; Chris Lilley; Lea Verou. W3C. 15 December 2021. W3C Working Draft. URL: https://www.w3.org/TR/css-color-4/
[CSS-MIME]
The text/css Media Type. H. Lie; B. Bos; C. Lilley. IETF. March 1998. Informational. URL: https://www.rfc-editor.org/rfc/rfc2318
[css-syntax-3]
CSS Syntax Module Level 3. Tab Atkins Jr.; Simon Sapin. W3C. 24 December 2021. W3C Candidate Recommendation. URL: https://www.w3.org/TR/css-syntax-3/
[dom]
DOM Standard. Anne van Kesteren. WHATWG. Living Standard. URL: https://dom.spec.whatwg.org/
[ECMA-402]
ECMAScript Internationalization API Specification. Ecma International. URL: https://tc39.es/ecma402/
[ECMAScript-MIME]
Scripting Media Types. B. Hoehrmann. IETF. April 2006. Informational. URL: https://www.rfc-editor.org/rfc/rfc4329
[fetch]
Fetch Standard. Anne van Kesteren. WHATWG. Living Standard. URL: https://fetch.spec.whatwg.org/
[HTML]
HTML Standard. Anne van Kesteren; Domenic Denicola; Ian Hickson; Philip Jägenstedt; Simon Pieters. WHATWG. Living Standard. URL: https://html.spec.whatwg.org/multipage/
[image-resource]
Image Resource. Aaron Gustafson; Rayan Kanso; Marcos Caceres. W3C. 4 June 2021. W3C Working Draft. URL: https://www.w3.org/TR/image-resource/
[infra]
Infra Standard. Anne van Kesteren; Domenic Denicola. WHATWG. Living Standard. URL: https://infra.spec.whatwg.org/
[JSON]
The JavaScript Object Notation (JSON) Data Interchange Format. T. Bray, Ed.. IETF. December 2017. Internet Standard. URL: https://www.rfc-editor.org/rfc/rfc8259
[MEDIAQUERIES-5]
Media Queries Level 5. Dean Jackson; Florian Rivoal; Tab Atkins Jr.; Daniel Libby. W3C. 18 December 2021. W3C Working Draft. URL: https://www.w3.org/TR/mediaqueries-5/
[MIME-TYPES]
Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types. N. Freed; N. Borenstein. IETF. November 1996. Draft Standard. URL: https://www.rfc-editor.org/rfc/rfc2046
[permissions]
Permissions. Marcos Caceres; Mike Taylor. W3C. 15 February 2022. W3C Working Draft. URL: https://www.w3.org/TR/permissions/
[RFC2119]
Key words for use in RFCs to Indicate Requirement Levels. S. Bradner. IETF. March 1997. Best Current Practice. URL: https://www.rfc-editor.org/rfc/rfc2119
[RFC7159]
The JavaScript Object Notation (JSON) Data Interchange Format. T. Bray, Ed.. IETF. March 2014. Proposed Standard. URL: https://www.rfc-editor.org/rfc/rfc7159
[RFC8174]
Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words. B. Leiba. IETF. May 2017. Best Current Practice. URL: https://www.rfc-editor.org/rfc/rfc8174
[SCREEN-ORIENTATION]
The Screen Orientation API. Mounir Lamouri; Marcos Caceres; Johanna Herman. W3C. 6 September 2021. W3C Working Draft. URL: https://www.w3.org/TR/screen-orientation/
[UNICODE]
The Unicode Standard. Unicode Consortium. URL: https://www.unicode.org/versions/latest/
[UNICODE-SECURITY]
Unicode Security Considerations. Mark Davis; Michel Suignard. Unicode Consortium. 19 September 2014. Unicode Technical Report #36. URL: https://www.unicode.org/reports/tr36/tr36-15.html
[URL]
URL Standard. Anne van Kesteren. WHATWG. Living Standard. URL: https://url.spec.whatwg.org/

M.2 Informative references

[manifest-app-info]
Web App Manifest - Application Information. Aaron Gustafson. W3C. 30 September 2021. W3C Working Group Note. URL: https://www.w3.org/TR/manifest-app-info/
[mimesniff]
MIME Sniffing Standard. Gordon P. Hemsley. WHATWG. Living Standard. URL: https://mimesniff.spec.whatwg.org/
[RFC7258]
Pervasive Monitoring Is an Attack. S. Farrell; H. Tschofenig. IETF. May 2014. Best Current Practice. URL: https://www.rfc-editor.org/rfc/rfc7258
[RFC7540]
Hypertext Transfer Protocol Version 2 (HTTP/2). M. Belshe; R. Peon; M. Thomson, Ed.. IETF. May 2015. Proposed Standard. URL: https://httpwg.org/specs/rfc7540.html
[SERVICE-WORKERS-1]
Service Workers 1. Alex Russell; Jungkee Song; Jake Archibald; Marijn Kruisselbrink. W3C. 19 November 2019. W3C Candidate Recommendation. URL: https://www.w3.org/TR/service-workers-1/
[TLS]
The Transport Layer Security (TLS) Protocol Version 1.2. T. Dierks; E. Rescorla. IETF. August 2008. Proposed Standard. URL: https://www.rfc-editor.org/rfc/rfc5246
[webidl]
Web IDL Standard. Edgar Chen; Timothy Gu. WHATWG. Living Standard. URL: https://webidl.spec.whatwg.org/