W3C

Web Services Transfer (WS-Transfer)

W3C Proposed Recommendation 27 September 2011

This version:
http://www.w3.org/TR/2011/PR-ws-transfer-20110927
Latest version:
http://www.w3.org/TR/ws-transfer
Previous version:
http://www.w3.org/TR/2011/CR-ws-transfer-20110428
Editors:
Doug Davis, IBM
Ashok Malhotra, Oracle
Katy Warr, IBM
Wu Chou, Avaya

Abstract

This specification describes a general SOAP-based protocol for accessing XML representations of Web service-based resources.

Status of this Document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

The W3C Membership and other interested parties are invited to review the document and send comments to the Working Group's public mailing list public-ws-resource-access-comments@w3.org mailing list (public archive) until 4 November 2011. See W3C mailing list and archive usage guidelines. Advisory Committee Representatives should consult their WBS questionnaires.

No substantive changes were made as a result of the Candidate Recommendation phase (see also diff, test scenario and implementation report).

A Proposed Recommendation is a specification that is under review by the W3C Advisory Committee for endorsement as a W3C Recommendation. It is is a mature document that has been widely reviewed and has been shown to be implementable. W3C encourages everybody to implement this specification.

Publication as a Proposed Recommendation does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

It has been produced by the Web Services Resource Access Working Group (WG), which is part of the W3C Web Services Activity.

This document was produced by a group operating under the 5 February 2004 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.

Table of Contents

1 Composable Architecture
2 Introduction
   2.1 Requirements
3 Terminology and Notation
   3.1 Notational Conventions
   3.2 Considerations on the Use of Extensibility Points
   3.3 Terminology
   3.4 Compliance
   3.5 XML Namespaces
4 Resource Operations
   4.1 Get
   4.2 Put
   4.3 Delete
5 Resource Factory Operations
   5.1 Create
6 Faults
   6.1 InvalidRepresentation
   6.2 UnknownDialect
   6.3 PutDenied
   6.4 UnknownResource
7 Security Considerations
   7.1 Protecting Resources
   7.2 Protecting Resource Factories
8 WS-Transfer Metadata
   8.1 TransferResource Assertion
   8.2 TransferResourceFactory Assertion
9 Acknowledgements
10 References
   10.1 Normative References
   10.2 Informative References

Appendices

A XML Schema
B WSDL
C Change Log


1 Composable Architecture

By using the XML, SOAP [SOAP11], [SOAP12], and WSDL [WSDL11] extensibility models, the Web service specifications (WS-*) are designed to be composed with each other to provide a rich set of tools for the Web services environment. This specification specifically relies on other Web service specifications to provide secure, reliable, and/or transacted message delivery and to express Web service and client policy.

2 Introduction

This specification defines a mechanism for acquiring XML-based representations of entities using the Web service infrastructure. It defines two types of entities:

Specifically, it defines two operations for sending and receiving the representation of a given resource and two operations for creating and deleting a resource and its corresponding representation.

Note that the state maintenance of a resource is at most subject to the "best efforts" of the hosting server. When a client receives the server's acceptance of a request to create or update a resource, it can reasonably expect that the resource now exists at the confirmed location and with the confirmed representation, but this is not a guarantee, even in the absence of any third parties. The server MAY change the representation of a resource, MAY remove a resource entirely, or MAY bring back a resource that was deleted.

For instance, the server might store resource state information on a disk drive. If that drive crashes and the server recovers state information from a backup tape, changes that occurred after the backup was made will be lost.

A server might have other operational processes that change resource state information. For example, a server could purge resources that have not been accessed for some period of time.

In addition to this, there might be application or process specific reasons for a server to augment or transform the representation provided by an update or create operation. For example, the server might populate the optional properties of a newly created resource with meaningful default values.

Finally all clients need to be aware that there might be other clients simultaneously accessing, creating, and updating the same resources.

In essence, the confirmation by a service of having processed a request to create, modify, or delete a resource implies a commitment only at the instant that the confirmation was generated. While the usual case is that resources are long-lived and stable, there are no guarantees, and clients are advised to code defensively.

There is no requirement for uniformity in resource representations between the messages defined in this specification. For example, the representations used by Create or Put can differ from the representation returned by Get, depending on the semantic requirements of the service. Additionally, there is no requirement that the resource content is fixed for any given endpoint reference. The resource content can vary based on environmental factors, such as the security context, time of day, configuration, or the dynamic state of the service.

2.1 Requirements

This specification intends to meet the following requirements:

  • Provide a SOAP-based protocol for managing resources and their representations.

  • Minimize additional mechanism beyond the current Web Services architecture.

3 Terminology and Notation

3.1 Notational Conventions

The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC 2119].

This specification uses the following syntax to define outlines for messages:

  • The syntax appears as an XML instance, but values in italics indicate data types instead of literal values.

  • Characters are appended to elements and attributes to indicate cardinality:

    • "?" (0 or 1)

    • "*" (0 or more)

    • "+" (1 or more)

  • The character "|" is used to indicate a choice between alternatives.

  • The characters "(" and ")" are used to indicate that contained items are to be treated as a group with respect to cardinality or choice.

  • The characters "[" and "]" are used to call out references and property names.

  • Ellipsis (i.e. "...") indicate points of extensibility.

  • XML namespace prefixes (see Table 3-1) are used to indicate the namespace of the element being defined.

In addition to Message Information Header properties [WS-Addressing], this specification uses the following properties to define messages:

[Headers]

Unordered message headers.

[Action]

The value to be used for the wsa:Action IRI.

[Body]

A message body.

These properties bind to a SOAP Envelope as follows:

<s:Envelope>
  <s:Header>
    [Headers]
    <wsa:Action>[Action]</wsa:Action>
    ...
  </s:Header>
  <s:Body>[Body]</s:Body>
</s:Envelope>

This specification can be used in terms of XML Information Set (Infoset) [XML Infoset], even though the specification uses XML 1.0 terminology. Valid Infoset for this specification is the one serializable in XML 1.0, hence the use of XML 1.0.

The term "generate" is used in relation to the various faults defined by this specification to imply that a fault is produced and no further processing SHOULD be performed. In these cases the fault SHOULD be transmitted. However, there might be reasons when a compliant implementation can choose not to transmit the fault - for example, security concerns - in these situations the service MAY choose not to transmit the fault.

3.2 Considerations on the Use of Extensibility Points

The elements defined in this specification MAY be extended at the points indicated by their outlines and schema. Implementations MAY add child elements and/or attributes at the indicated extension points but MUST NOT contradict the semantics of the parent and/or owner, respectively. If a receiver does not recognize an extension, the receiver SHOULD ignore that extension. Senders MAY indicate the presence of an extension that has to be understood through the use of a corresponding SOAP Header with a soap:mustUnderstand attribute with the value "1".

In cases where it is either desirable or necessary for the receiver of a request that has been extended to indicate that it has recognized and accepted the semantics associated with that extension, it is RECOMMENDED that the receiver add a corresponding extension to the response message. The definition of an extension SHOULD clearly specify how the extension that appears in the response correlates with that in the corresponding request.

Extension elements and attributes MUST NOT use the Web Services Transfer namespace URI.

3.3 Terminology

Resource

A Web service that is addressable using an endpoint reference and can be represented by an XML Information Set.

The resource's representation MUST be representable by either zero or one Document Information items. The following Information items MUST NOT appear as children anywhere within the Document Information item's children: Processing Instruction, Unexpanded Entity Reference, Document Type Declaration, Unparsed Entity and Notation. The representation of the resource can be in any XML version supported by the resource manager, however, when transmitted within a SOAP Envelope the entire envelope (including the representation of the resource) MUST use the same XML version.

The representation can be retrieved using the Get operation and can be manipulated using the Put and Delete operations.

Resource Factory

A Web service that is capable of creating new resources using the Create operation defined in this specification.

3.4 Compliance

An implementation is not compliant with this specification if it fails to satisfy one or more of the MUST or REQUIRED level requirements defined herein. A SOAP Node MUST NOT use the XML namespace identifier for this specification (listed in 3.5 XML Namespaces) within SOAP Envelopes unless it is compliant with this specification.

Normative text within this specification takes precedence over the XML Schema and WSDL descriptions, which in turn take precedence over outlines, which in turn take precedence over examples.

All messages defined by this specification MUST conform to the WS-Addressing specifications and be sent to a Web service that is addressable by an EPR (see [WS-Addressing]).

Unless otherwise noted, all IRIs are absolute IRIs and IRI comparison MUST be performed according to [RFC 3987] section 5.3.1.

For any message defined by this specification, any OPTIONAL elements or attributes in the message MAY be used by senders of the message; however receivers of those messages MUST support those OPTIONAL elements and attributes, unless other behavior is explicitly defined by this specification.

Implementations are expected to support both UTF-8 and UTF-16 as described in XML 1.0.

Implementations of this specification MUST conform to the corrected version of WSDL as defined by the 'WSDL Correction' sections of WS-I Basic Profile 1.2 [BP12] and WS-I Basic Profile 2.0 [BP20].

3.5 XML Namespaces

The XML Namespace URI that MUST be used by implementations of this specification is:

Table 3-1 lists XML namespaces that are used in this specification. The choice of any namespace prefix is arbitrary and not semantically significant.

Table 3-1: Prefixes and XML Namespaces used in this specification
Prefix XML Namespace Specification(s)
wst http://www.w3.org/2011/03/ws-tra This specification
s Either SOAP 1.1 or 1.2 SOAP
s11 http://schemas.xmlsoap.org/soap/envelope/ [SOAP11]
s12 http://www.w3.org/2003/05/soap-envelope [SOAP12]
wsa http://www.w3.org/2005/08/addressing [WS-Addressing]
wsdl http://schemas.xmlsoap.org/wsdl/ [WSDL11]
wsp http://www.w3.org/ns/ws-policy [WS-Policy]
xs http://www.w3.org/2001/XMLSchema XML Schema [XMLSchema - Part 1], [XMLSchema - Part 2]

The working group intends to update the value of the Web Services Transfer namespace URI each time a new version of this document is published until such time that the document reaches Candidate Recommendation status. Once it has reached Candidate Recommendation status, the working group intends to maintain the value of the Web Services Transfer namespace URI that was assigned in the Candidate Recommendation unless significant changes are made that impact the implementation or break post-CR implementations of the specification. Also see http://www.w3.org/2001/tag/doc/namespaceState.html and http://www.w3.org/2005/07/13-nsuri .

4 Resource Operations

4.1 Get

This specification defines one Web service operation (Get) for fetching a one-time snapshot of the representation of a resource. This operation MUST be supported by compliant WS-Transfer resources.

The Get request message MUST be of the following form:

[Action]
  http://www.w3.org/2011/03/ws-tra/Get

[Body]
  <wst:Get Dialect="xs:anyURI"? ...>
    xs:any*
  </wst:Get>

The following describes additional, normative constraints on the outline listed above:

[Body]/wst:Get

This is a REQUIRED element that has no defined child element content.

[Body]/wst:Get@Dialect

When this OPTIONAL attribute is present it contains a IRI that refers to additional information for the service on how to process this element. If the attribute is present but the dialect IRI is not known then the service MUST generate an wst:UnknownDialect fault. There is no default value for the attribute. If the attribute is absent, then the base behavior is used.

[Body]/wst:Get@Dialect="http://www.w3.org/2011/03/ws-fra"

The WS-Fragment [WS-Fragment] specification defines this dialect IRI. Use of this IRI indicates that the contents of the Get element MUST be processed as specified by the WS-Fragment [WS-Fragment] specification.

If the request message reaches a conformant implementation of WS-Transfer and the message refers to an unknown resource, then the implementation MUST generate a wst:UnknownResource fault.

A Get request MUST be targeted at the resource whose representation is desired as described in 3 Terminology and Notation of this specification.

If the resource accepts a Get request, it MUST reply with a response of the following form:

[Action]
  http://www.w3.org/2011/03/ws-tra/GetResponse

[Body]
  <wst:GetResponse ...>
    <wst:Representation ...>
      xs:any?
    </wst:Representation>?
    xs:any*
  </wst:GetResponse>

The following describes additional, normative constraints on the outline listed above:

[Body]/wst:GetResponse/wst:Representation

This OPTIONAL element acts as a container for the full representation of the resource. This element MUST be present if the corresponding Get request did not specify a Dialect attribute. This element MAY have no children in cases where there is no resource representation.

Other components of the outline above are not further constrained by this specification.

This operation is safe; it will not result in any side effect imputable to the requester. This means that in case of an underlying protocol error that might get unnoticed, resending the same request can be done automatically.

The following shows a sample SOAP envelope containing a Get request:

<s:Envelope  
    xmlns:s="http://www.w3.org/2003/05/soap-envelope" 
    xmlns:wsa="http://www.w3.org/2005/08/addressing" 
    xmlns:xxx="http://fabrikam123.example.com/resource-model" >
  <s:Header>
    <wsa:ReplyTo>
      <wsa:Address>
        http://www.fabrikam123.example.org/pullport
      </wsa:Address>
    </wsa:ReplyTo>
    <wsa:To>http://www.example.org/repository</wsa:To>
    <xxx:CustomerID wsa:IsReferenceParameter="true">
      732199
    </xxx:CustomerID>
    <xxx:Region wsa:IsReferenceParameter="true">
      EMEA
    </xxx:Region>
    <wsa:Action>
      http://www.w3.org/2011/03/ws-tra/Get
    </wsa:Action>
    <wsa:MessageID>
      urn:uuid:00000000-0000-0000-C000-000000000046
    </wsa:MessageID>
  </s:Header>
  <s:Body>
    <wst:Get/>
  </s:Body>
</s:Envelope>

The following shows the corresponding response message:

<s:Envelope  
    xmlns:s="http://www.w3.org/2003/05/soap-envelope" 
    xmlns:wsa="http://www.w3.org/2005/08/addressing" 
    xmlns:xxx="http://fabrikam123.example.com/resource-model" >
  <s:Header>
    <wsa:To>http://www.fabrikam123.example.org/pullport</wsa:Address>
    <wsa:Action>
      http://www.w3.org/2011/03/ws-tra/GetResponse
    </wsa:Action>
    <wsa:MessageID>
      urn:uuid:0000010e-0000-0000-C000-000000000046
    </wsa:MessageID>
    <wsa:RelatesTo>
      urn:uuid:00000000-0000-0000-C000-000000000046
    </wsa:RelatesTo>
  </s:Header>
  <s:Body>
    <wst:GetResponse>
      <wst:Representation>
        <xxx:Customer>
          <xxx:first>Roy</xxx:first><xxx:last>Hill</xxx:last>
          <xxx:address>123 Main Street</xxx:address>
          <xxx:city>Manhattan Beach</xxx:city>
          <xxx:state>CA</xxx:state>
          <xxx:zip>90266</xxx:zip>
        </xxx:Customer>
      </wst:Representation>
    </wst:GetResponse>
  </s:Body>
</s:Envelope>

In this example, the representation of the resource is the following XML element:

  <xxx:Customer>
    <xxx:first>Roy</xxx:first><xxx:last>Hill</xxx:last>
    <xxx:address>123 Main Street</xxx:address>
    <xxx:city>Manhattan Beach</xxx:city>
    <xxx:state>CA</xxx:state>
    <xxx:zip>90266</xxx:zip>
  </xxx:Customer>

4.2 Put

This specification defines one Web service operation (Put) for updating a resource. This operation MAY be supported by compliant WS-Transfer resources. A resource MAY accept updates that provide different XML representations than that returned by the resource; in such a case, the semantics of the update operation is defined by the resource.

Unless otherwise specified by an extension, this operation will replace the entire XML representation of the resource with the resource representation in the Put request message, or if the Put request message contains instructions, update the XML representation based on those instructions. When this operation is used to replace the entire XML representation, any OPTIONAL values (elements or attributes) not specified in the Put request message MUST be set to a resource-specific default value.

The Put request message MUST be of the following form:

[Action]
  http://www.w3.org/2011/03/ws-tra/Put

[Body]
  <wst:Put Dialect="xs:anyURI"? ...>
    <wst:Representation ...>
      xs:any?
    <wst:Representation>?
    xs:any*
  </wst:Put>

The following describes additional, normative constraints on the outline listed above:

[Body]/wst:Put@Dialect

When this OPTIONAL attribute is present it contains a IRI that refers to additional information for the service on how to process this element. If the attribute is present but the dialect IRI is not known then the service MUST generate an wst:UnknownDialect fault. There is no default value for the attribute. If the attribute is absent, then the base behavior is used.

[Body]/wst:Put@Dialect="http://www.w3.org/2011/03/ws-fra"

The WS-Fragment [WS-Fragment] specification defines this dialect IRI. Use of this IRI indicates that the contents of the Put element MUST be processed as specified by the WS-Fragment [WS-Fragment] specification.

[Body]/wst:Put/wst:Representation

This OPTIONAL element acts as a container for the full representation of the resource. This element MUST be present if the Dialect attribute is absent. This element MAY have no children. This case MUST be interpreted as a request to remove the resource's representation, not the resource itself.

If the request message reaches a conformant implementation of WS-Transfer and the message refers to an unknown resource, then the implementation MUST generate a wst:UnknownResource fault.

A Put request MUST be targeted at the resource whose representation is desired to be updated, as described in 3 Terminology and Notation of this specification.

The replacement representation could be considered to be invalid if it does not conform to the schema(s) for the target resource, is empty and the implementation does not support empty representations, or otherwise violates some cardinality or type constraint. If an implementation that validates the presented representation detects that the presented representation is invalid for the target resource, then the implementation MUST generate a wst:InvalidRepresentation fault.

The replacement representation could contain within it element or attribute values that are different than their corresponding values in the current representation. Such changes could affect elements or attributes that, for whatever reason, the implementation does not wish to allow the client to change. An implementation MAY choose to ignore such elements or attributes. If an implementation does not ignore those elements or attributes, it MUST generate a wst:PutDenied fault. See 6 Faults.

Other components of the outline above are not further constrained by this specification.

A successful Put operation updates the current representation associated with the targeted resource. An unsuccessful Put operation does not affect the resource.

If the resource accepts a Put request and performs the requested update, it MUST reply with a response of the following form:

[Action]
  http://www.w3.org/2011/03/ws-tra/PutResponse

[Body]
  <wst:PutResponse ...>
    <wst:Representation ...>
      xs:any?
    </wst:Representation>?
    xs:any*
  </wst:PutResponse>
[Body]/wst:PutResponse/wst:Representation

This OPTIONAL element acts as a container for the full representation of the resource. This element is intended for use as an optimization to save the client the overhead of having to perform a subsequent Get operation. A service MAY include this element to return the current representation of the resource. This element MAY have no children in cases where there is no resource representation.

Other components of the outline above are not further constrained by this specification.

The following shows a sample SOAP envelope containing a Put request:

<s:Envelope  
    xmlns:s="http://www.w3.org/2003/05/soap-envelope" 
    xmlns:wsa="http://www.w3.org/2005/08/addressing"
    xmlns:xxx="http://fabrikam123.example.com/resource-model" >
  <s:Header>
    <wsa:ReplyTo>
      <wsa:Address>
        http://www.fabrikam123.example.org/sender
      </wsa:Address>
    </wsa:ReplyTo>
    <wsa:To>http://www.example.org/pushport</wsa:To>
    <xxx:CustomerID wsa:IsReferenceParameter="true">
      732199
    </xxx:CustomerID>
    <xxx:Region wsa:IsReferenceParameter="true">
      EMEA
    </xxx:Region>
    <wsa:Action>
      http://www.w3.org/2011/03/ws-tra/Put
    </wsa:Action>
    <wsa:MessageID>
      urn:uuid:00000000-0000-0000-C000-000000000047
    </wsa:MessageID>
  </s:Header>
  <s:Body>
    <wst:Put>
      <wst:Representation>
        <xxx:Customer>
          <xxx:first>Roy</xxx:first><xxx:last>Hill</xxx:last>
          <xxx:address>321 Main Street</xxx:address>
          <xxx:city>Manhattan Beach</xxx:city>
          <xxx:state>CA</xxx:state>
          <xxx:zip>90266</xxx:zip>
        </xxx:Customer>
      </wst:Representation>
    </wst:Put>
  </s:Body>
</s:Envelope> 

The following shows the corresponding response message indicating success:

<s:Envelope  
    xmlns:s="http://www.w3.org/2003/05/soap-envelope" 
    xmlns:wsa="http://www.w3.org/2005/08/addressing"
    xmlns:xxx="http://fabrikam123.example.com/resource-model" >
  <s:Header>
    <wsa:To>http://www.fabrikam123.example.org/sender</wsa:Address>
    <wsa:Action>
      http://www.w3.org/2011/03/ws-tra/PutResponse
    </wsa:Action>
    <wsa:MessageID>
      urn:uuid:0000010e-0000-0000-C000-000000000047
    </wsa:MessageID>
    <wsa:RelatesTo>
      urn:uuid:00000000-0000-0000-C000-000000000047
    </wsa:RelatesTo>
  </s:Header>
  <s:Body>
    <wst:PutResponse/>
  </s:Body>
</s:Envelope> 

4.3 Delete

This specification defines one Web service operation (Delete) for deleting a resource in its entirety. This operation MAY be supported by compliant WS-Transfer resources.

The Delete request message MUST be of the following form:

[Action]
  http://www.w3.org/2011/03/ws-tra/Delete

[Body]
  <wst:Delete Dialect="xs:anyURI"? ...>
    xs:any*
  </wst:Delete>

The following describes additional, normative constraints on the outline listed above:

[Body]/wst:Delete

This is a REQUIRED element that has no defined child element content.

[Body]/wst:Delete@Dialect

When this OPTIONAL attribute is present it contains a IRI that refers to additional information for the service on how to process this element. If the attribute is present but the dialect IRI is not known then the service MUST generate an wst:UnknownDialect fault. There is no default value for the attribute. If the attribute is absent, then the base behavior is used.

If the request message reaches a conformant implementation of WS-Transfer and the message refers to an unknown resource, then the implementation MUST generate a wst:UnknownResource fault.

A Delete request MUST be targeted at the resource to be deleted as described in 3 Terminology and Notation of this specification.

Other components of the outline above are not further constrained by this specification.

A successful Delete operation deletes the targeted resource.

If the resource accepts a Delete request, it MUST reply with a response of the following form:

[Action]
  http://www.w3.org/2011/03/ws-tra/DeleteResponse

[Body]
  <wst:DeleteResponse ...>
    xs:any*
  </wst:DeleteResponse>
[Body]/wst:DeleteResponse

This REQUIRED element has no defined child element content.

Other components of the outline above are not further constrained by this specification.

The following shows a sample SOAP envelope containing a Delete request:

<s:Envelope  
    xmlns:s="http://www.w3.org/2003/05/soap-envelope" 
    xmlns:wsa="http://www.w3.org/2005/08/addressing"
    xmlns:xxx="http://fabrikam123.example.com/resource-model" >
  <s:Header>
    <wsa:ReplyTo>
      <wsa:Address>
        http://www.fabrikam123.example.org/sender
      </wsa:Address>
    </wsa:ReplyTo>
    <wsa:To>http://www.example.org/pushport</wsa:To>
    <xxx:CustomerID wsa:IsReferenceParameter="true">
      732199
    </xxx:CustomerID>
    <xxx:Region wsa:IsReferenceParameter="true">
      EMEA
    </xxx:Region>
    <wsa:Action>
      http://www.w3.org/2011/03/ws-tra/Delete
    </wsa:Action>
    <wsa:MessageID>
      urn:uuid:00000000-0000-0000-C000-000000000049
    </wsa:MessageID>
  </s:Header>
  <s:Body>
    <wst:Delete/>
  </s:Body>
</s:Envelope> 

The following shows the corresponding response message indicating success:

<s:Envelope  
    xmlns:s="http://www.w3.org/2003/05/soap-envelope" 
    xmlns:wsa="http://www.w3.org/2005/08/addressing"
    xmlns:xxx="http://fabrikam123.example.com/resource-model" >
  <s:Header>
    <wsa:To>http://www.fabrikam123.example.org/sender</wsa:Address>
    <wsa:Action>
      http://www.w3.org/2011/03/ws-tra/DeleteResponse
    </wsa:Action>
    <wsa:MessageID>
      urn:uuid:0000010e-0000-0000-C000-000000000049
    </wsa:MessageID>
    <wsa:RelatesTo>
      urn:uuid:00000000-0000-0000-C000-000000000049
    </wsa:RelatesTo>
  </s:Header>
  <s:Body>
    <wst:DeleteResponse/>
  </s:Body>
</s:Envelope> 

5 Resource Factory Operations

5.1 Create

This specification defines one Web service operation (Create) for creating a resource and providing its initial representation. This operation MAY be supported by compliant WS-Transfer resource factories. In some cases, the initial representation MAY constitute the representation of a logical constructor for the resource and can thus differ structurally from the representation returned by Get or the one used by Put. This is because the parameterization requirement for creating a resource is often distinct from the steady-state representation of the resource. Implementations SHOULD provide metadata which describes the use of the representation and how it relates to the resource which is created, but such mechanisms are beyond the scope of this specification. The resource factory that receives a Create request will allocate a new resource that is initialized from the presented representation. The new resource will be assigned a service-determined endpoint reference that is returned in the response message.

The Create request message MUST be of the following form:

[Action]
  http://www.w3.org/2011/03/ws-tra/Create

[Body]
  <wst:Create Dialect="xs:anyURI"? ...>
    <wst:Representation ...>
      xs:any?
    </wst:Representation>?
    xs:any*
  </wst:Create>

The following describes additional, normative constraints on the outline listed above:

[Body]/wst:Create@Dialect

When this OPTIONAL attribute is present it contains a IRI that refers to additional information for the service on how to process this element. If the attribute is present but the dialect IRI is not known then the service MUST generate an wst:UnknownDialect fault. There is no default value for the attribute. If the attribute is absent, then the base behavior is used.

[Body]/wst:Create/wst:Representation

This OPTIONAL element acts as a container for the full representation of the resource. If this element is not present the resource MUST be created using default values (equivalent to a null constructor). This element MAY have no children. This case MUST be interpreted as a request to create a new resource with an empty representation (equivalent to an empty constructor).

A Create request MUST be targeted at a resource factory capable of creating the desired new resource. This factory is distinct from the resource being created (which by definition does not exist prior to the successful processing of the Create request message).

The representation could be considered to be invalid if it does not conform to the schema(s) for the target resource, is empty and the implementation does not support empty representations, or otherwise violates some cardinality or type constraint. If an implementation that validates the presented representation detects that the presented representation is invalid for the target resource, then the implementation MUST generate a wst:InvalidRepresentation fault.

Other components of the outline above are not further constrained by this specification.

If the resource factory accepts a Create request, it MUST reply with a response of the following form:

[Action]
  http://www.w3.org/2011/03/ws-tra/CreateResponse

[Body]
  <wst:CreateResponse ...>
    <wst:ResourceCreated>endpoint-reference</wst:ResourceCreated>
    <wst:Representation ...>
      xs:any?
    </wst:Representation>?
    xs:any*
  </wst:CreateResponse>
[Body]/wst:CreateResponse/wst:ResourceCreated

This REQUIRED element MUST be an endpoint reference for the newly created resource. This endpoint reference MUST identify the resource for future Get, Put, and Delete operations.

[Body]/wst:CreateResponse/wst:Representation

This OPTIONAL element acts as a container for the full representation of the resource. This element is intended for use as an optimization to save the client the overhead of having to perform a subsequent Get operation. A service MAY include this element to return the current representation of the resource. This element MAY have no children in cases where there is no resource representation.

Other components of the outline above are not further constrained by this specification.

The following shows a sample SOAP envelope containing a Create request:

<s:Envelope  
    xmlns:s="http://www.w3.org/2003/05/soap-envelope" 
    xmlns:wsa="http://www.w3.org/2005/08/addressing"
    xmlns:xxx="http://fabrikam123.example.com/resource-model" >
  <s:Header>
    <wsa:ReplyTo>
      <wsa:Address>
        http://www.fabrikam123.example.org/sender
      </wsa:Address>
    </wsa:ReplyTo>
    <wsa:To>http://www.example.org/pushport/CustomerSpace</wsa:To>
    <wsa:Action>
      http://www.w3.org/2011/03/ws-tra/Create
    </wsa:Action>
    <wsa:MessageID>
      urn:uuid:00000000-0000-0000-C000-000000000048
    </wsa:MessageID>
  </s:Header>
  <s:Body>
    <wst:Create>
      <wst:Representation>
        <xxx:Customer>
          <xxx:first>Roy</xxx:first><xxx:last>Hill</xxx:last>
          <xxx:address>123 Main Street</xxx:address>
          <xxx:city>Manhattan Beach</xxx:city>
          <xxx:state>CA</xxx:state>
          <xxx:zip>90266</xxx:zip>
        </xxx:Customer>
      </wst:Representation>
    </wst:Create>
  </s:Body>
</s:Envelope>  

The following shows the corresponding response message indicating success:

<s:Envelope  
    xmlns:s="http://www.w3.org/2003/05/soap-envelope" 
    xmlns:wsa="http://www.w3.org/2005/08/addressing"
    xmlns:wst="http://www.w3.org/2011/03/ws-tra" 
    xmlns:xxx="http://fabrikam123.example.com/resource-model" >
  <s:Header>
    <wsa:To>http://www.fabrikam123.example.org/sender</wsa:Address>
    <wsa:Action>
      http://www.w3.org/2011/03/ws-tra/CreateResponse
    </wsa:Action>
    <wsa:MessageID>
      urn:uuid:0000010e-0000-0000-C000-000000000048
    </wsa:MessageID>
    <wsa:RelatesTo>
      urn:uuid:00000000-0000-0000-C000-000000000048
    </wsa:RelatesTo>
  </s:Header>
  <s:Body>
    <wst:CreateResponse>
      <wst:ResourceCreated>
        <wsa:Address>http://www.example.org/pushport</wsa:Address>
        <wsa:ReferenceParameters>
          <xxx:CustomerID>732199</xxx:CustomerID>
          <xxx:Region>EMEA</xxx:Region>
        </wsa:ReferenceParameters>
      </wst:ResourceCreated>
    </wst:CreateResponse>
  </s:Body>
</s:Envelope>

6 Faults

All fault messages defined in this specification MUST be sent according to the rules and usage described in [WS-Addressing 1.0 SOAP Binding] Section 6 for encoding SOAP 1.1 and SOAP 1.2 faults. The [Action] property below MUST be used for faults defined in this specification:

The definitions of faults in this section use the following properties:

[Code] The fault code.
[Subcode] The fault subcode.
[Reason] The English language reason element.
[Detail] The detail element. If absent, no detail element is defined for the fault.

The properties above bind to a SOAP 1.2 fault as follows:

<s12:Envelope>
  <s12:Header>
    <wsa:Action> [Action] </wsa:Action>
    <!-- Headers elided for brevity. -->
  </s12:Header>
  <s12:Body>
    <s12:Fault>
      <s12:Code>
        <s12:Value>[Code]</s12:Value>
        <s12:Subcode>
          <s12:Value>[Subcode]</s12:Value>
        </s12:Subcode>
      </s12:Code>
      <s12:Reason>
        <s12:Text xml:lang="en">[Reason]</s12:Text>
      </s12:Reason>
      <s12:Detail>
        [Detail]
        ...
      </s12:Detail>
    </s12:Fault>
  </s12:Body>
</s12:Envelope>

The properties bind to a SOAP 1.1 fault as follows:

<s11:Envelope>
  <s12:Header>
    <wsa:Action> [Action] </wsa:Action>
    <!-- Headers elided for brevity. -->
  </s12:Header>
  <s11:Body>
    <s11:Fault>
      <faultcode>[Subcode]</faultcode>
      <faultstring xml:lang="en">[Reason]</faultstring>
      <detail>
        [Detail]
        ...
      </detail>
    </s11:Fault>
  </s11:Body>
</s11:Envelope>

6.1 InvalidRepresentation

This fault MUST be generated when an incorrect representation is sent in a wst:Put or wst:Create message.

[Code]s:Sender
[Subcode]wst:InvalidRepresentation
[Reason]The supplied representation is invalid
[Detail]none

6.2 UnknownDialect

This fault MUST be generated when a service detects an unknown Dialect IRI in a request message.

[Code]s:Sender
[Subcode]wst:UnknownDialect
[Reason] The specified Dialect IRI is not known.
[Detail]The unknown IRI if specified

6.3 PutDenied

This fault MUST be generated when a Put request message attempts to modify a portion of a resource but is not allowed to do so.

[Code]s:Sender
[Subcode]wst:UpdateDenied
[Reason] One or more elements or attributes cannot be updated.
[Detail] An OPTIONAL list of the QNames of the elements or attributes that are not allowed to be updated.

6.4 UnknownResource

This fault MUST be generated when a request specifies a resource that is not known.

[Code]s:Sender
[Subcode]wst:UnknownResource
[Reason] The resource is not known.
[Detail]none

7 Security Considerations

This specification considers two sets of security requirements, those of the applications that use the WS-Transfer protocol and those of the protocol itself.

This specification makes no assumptions about the security requirements of the applications that use WS-Transfer. However, once those requirements have been satisfied within a given operational context, the addition of WS-Transfer to this operational context can not undermine the fulfillment of those requirements; the use of WS-Transfer SHOULD NOT create additional attack vectors within an otherwise secure system.

The material below is not a "check list". There are many other security concerns that need to be considered when implementing or using this protocol. Implementers and users of this protocol are urged to perform a security analysis to determine their particular threat profile and the appropriate responses to those threats.

7.1 Protecting Resources

Both resources and the information that makes up their representation might be sensitive. In these cases, it is advisable for resource managers to authenticate and authorize clients attempting Get, Put, or Delete operations. To protect representations sent over a network, the wst:Get, wst:GetResponse, wst:Put, and wst:PutResponse messages ought to have the appropriate authenticity, integrity, and confidentiality measures applied.

7.2 Protecting Resource Factories

In cases where resources and/or the information that makes up their representation are sensitive so, too, are the services that create these resources. In such cases it is advisable for resource factories to authenticate and authorize clients attempting Create operations. To protect representations sent over a network, wst:CreateResponse messages that include representations ought to have the appropriate authenticity, integrity, and confidentiality measures applied.

8 WS-Transfer Metadata

An endpoint MAY indicate its support of WS-Transfer, or its features, by including the WS-Transfer TransferResource or TransferResourceFactory Policy assertions within its WSDL. By doing so the endpoint is indicating that the corresponding WS-Transfer operations are supported by that endpoint even though they are implicit and do not explicitly appear in its WSDL (i.e. the WS-Transfer operations do not appear in the WSDL that MAY be retrievable by using a WS-MetadataExchange GetWSDL to that endpoint).

The WS-Transfer WSDL containing the operations indicated by the TransferResource or TransferResourceFactory assertions MAY be exposed by including the WSDL as a child of the appropriate Policy assertion or by including a reference to it using the mex:Location or mex:Reference element (as described in WS-MetadataExchange [WS-MetadataExchange] Section 9).

This WS-Transfer WSDL can be annotated to indicate any endpoint specific metadata that might be needed by clients interacting with the WS-Transfer operations. For example, the WSDL might have policy assertions that indicate a particular security mechanism used to protect the WS-Transfer operations supported by this endpoint.

8.1 TransferResource Assertion

Services indicate support for the WS-Transfer's definition of a Transfer Resource through the use of the Web Services Policy - Framework [WS-Policy] and Web Services Policy - Attachment [WS-Policy Attachment] specifications.

This specification defines a policy assertion (wst:TransferResource). The normative outline of this assertion is:

<wst:TransferResource ...>
  <wst:PutOperationSupported .../> ?
  <wst:DeleteOperationSupported .../> ?
  <wst:FaultOnPutDenied .../> ?
  <wst:Dialect URI='xs:anyURI ...> 
    xs:any*
  </wst:Dialect> * 
  <wst:Resource ...> xs:QName </wst:Resource> ?
  xs:any*
</wst:TransferResource>

The following describes additional, normative constraints on the outline listed above:

/wst:TransferResource

This policy assertion has Endpoint Policy Subject. When present in a policy alternative, it indicates that the subject is a Transfer resource and the WS-Transfer protocol MUST be used when communicating with this endpoint. Unless support for OPTIONAL operations is explicitly indicated by either the PutOperationSupported or DeleteOperationSupported parameters only the Get operation is supported.

/wst:TransferResource/wst:PutOperationSupported

When present, this OPTIONAL parameter indicates that the Put operation is supported by this endpoint.

/wst:TransferResource/wst:DeleteOperationSupported

When present, this OPTIONAL parameter indicates that the Delete operation is supported by this endpoint.

/wst:TransferResource/wst:FaultOnPutDenied

When present, this OPTIONAL parameter indicates that attempts to change portions of the representation that are read-only will generate a wst:PutDenied fault. If this parameter is not present, attempts to modify read-only portions of the resource representation will be ignored without any fault being generated.

/wst:TransferResource/wst:Dialect

When present, this OPTIONAL parameter indicates support for the specified Dialect IRI.

/wst:TransferResource/wst:Dialect/xs:any

This extensibility point allows for additional Dialect specific metadata to be included within the policy assertion. Any metadata that appears is scoped to the use of the specified Dialect URI.

/wst:TransferResource/wst:Resource

When present, this OPTIONAL parameter provides the QName referencing the Global Element Declaration (GED) or type of this resource. This QName can be used in order to retrieve the schema of the resource.

If an endpoint uses this parameter then it MUST only accept and transmit XML representations of the resource that adhere to the scheme referenced by this QName.

/wst:TransferResource/xs:any

This extensibility point allows for additional WS-Transfer specific metadata to be included within the policy assertion - e.g. WS-Transfer WSDL, or nested policy assertions related to the WS-Transfer message exchanges. Any metadata that appears is scoped to the operations and features of the WS-Transfer specification.

8.2 TransferResourceFactory Assertion

Services indicate support for WS-Transfer's definition of a Transfer Resource Factory through the use of the Web Services Policy - Framework [WS-Policy] and Web Services Policy - Attachment [WS-Policy Attachment] specifications.

This specification defines a policy assertion (wst:TransferResourceFactory). The normative outline of this assertion is:

<wst:TransferResourceFactory ...>
  <wst:Resource ...> xs:QName </wst:Resource> *
  <wst:Dialect URI="xs:anyURI" ...>
    xs:any*
  </wst:Dialect> *
  xs:any*
</wst:TransferResourceFactory>

The following describes additional, normative constraints on the outline listed above:

/wst:TransferResourceFactory

This policy assertion has Endpoint Policy Subject. When present in a policy alternative, it indicates that the subject is a resource factory and the WS-Transfer protocol MUST be used when communicating with this endpoint.

/wst:TransferResourceFactory/wst:Resource

When present, this repeating OPTIONAL parameter indicates the QName referencing the GED of one type of resource representation supported by this factory.

If an endpoint uses this parameter then it MUST only accept and transmit XML representations of the resource that adhere to the scheme referenced by one of these QNames.

/wst:TransferResourceFactory/wst:Dialect

When present, this OPTIONAL parameter indicates support for the specified Dialect IRI.

/wst:TransferResourceFactory/wst:Dialect/xs:any

This extensibility point allows for additional Dialect specific metadata to be included within the policy assertion. Any metadata that appears is scoped to the use of the specified Dialect URI.

/wst:TransferResourceFactory/xs:any

This extensibility point allows for additional WS-Transfer specific metadata to be included within the policy assertion - e.g. WS-Transfer WSDL, or nested policy assertions related to the WS-Transfer message exchanges. Any metadata that appears is scoped to the operations and features of the WS-Transfer specification.

9 Acknowledgements

This specification has been developed as a result of joint work with many individuals and teams, including: Alessio Soldano (Red Hat), Ashok Malhotra (Oracle Corp.), Asir Vedamuthu (Microsoft Corp.), Bob Freund (Hitachi, Ltd.), Bob Natale (MITRE Corp.), David Snelling (Fujitsu, Ltd.), Doug Davis (IBM), Fred Maciel (Hitachi, Ltd.), Geoff Bullen (Microsoft Corp.), Gilbert Pilz (Oracle Corp.), Greg Carpenter (Microsoft Corp.), Jeff Mischkinsky (Oracle Corp.), Katy Warr (IBM), Li Li (Avaya Communications), Mark Little (Red Hat), Martin Chapman (Oracle Corp.), Paul Fremantle (WSO2), Paul Nolan (IBM), Prasad Yendluri (Software AG), Ram Jeyaraman (Microsoft Corp.), Sreedhara Narayanaswamy (CA), Sumeet Vij (Software AG), Tom Rutt (Fujitsu, Ltd.), Vikas Varma (Software AG), Wu Chou (Avaya Communications), Yves Lafon (W3C/ERCIM).

10 References

10.1 Normative References

BP12
WS-I Profile, Basic Profile Version 1.2 , R. Chumbley, et al, Editors. Web Services Interoperability Organization (WS-I), 9 November 2010. Available at http://ws-i.org/profiles/BasicProfile-1.2-2010-11-09.html.
BP20
WS-I Profile, Basic Profile Version 2.0 , R. Chumbley, et al, Editors. Web Services Interoperability Organization (WS-I), 9 November 2010. Available at http://ws-i.org/profiles/BasicProfile-2.0-2010-11-09.html.
RFC 2119
Key words for use in RFCs to Indicate Requirement Levels , S. Bradner, Author. Internet Engineering Task Force, March 1997. Available at http://www.ietf.org/rfc/rfc2119.txt.
RFC 3987
Internationalized Resource Identifiers (IRIs) , M. Duerst and M. Suignard, Authors. Internet Engineering Task Force, January 2005. Available at http://www.ietf.org/rfc/rfc3987.txt.
SOAP11
W3C Note, "Simple Object Access Protocol (SOAP) 1.1" , D. Box, et al, Editors. World Wide Web Consortium (W3C), 8 May 2000. Available at http://www.w3.org/TR/2000/NOTE-SOAP-20000508/.
SOAP12
W3C Recommendation, "SOAP Version 1.2 Part 1: Messaging Framework" , M. Gudgin, M. Hadley, N. Mendelsohn, J-J. Moreau, H. Frystyk Nielson, Editors. World Wide Web Consortium (W3C), 27 April 2007. Available at http://www.w3.org/TR/soap12-part1/.
WS-Addressing
W3C Recommendation, "Web Services Addressing 1.0 (WS-Addressing)" , M. Gudgin, M. Hadley, T. Rogers, Editors. World Wide Web Consortium (W3C), 9 May 2006. Available at http://www.w3.org/TR/ws-addr-core.
WS-Addressing 1.0 SOAP Binding
W3C Recommendation, "Web Services Addressing 1.0 - SOAP Binding" , M. Gudgin, M. Hadley, T. Rogers, Editors. World Wide Web Consortium (W3C), 9 May 2006. Available at http://www.w3.org/TR/ws-addr-soap.
WS-Policy
W3C Recommendation, "Web Services Policy (WS-Policy) 1.5 - Framework" , A. Vedamuthu, et al., Editors. World Wide Web Consortium (W3C), 4 September 2007. Available at http://www.w3.org/TR/ws-policy/.
WS-Policy Attachment
W3C Recommendation, "Web Services Policy (WS-Policy) 1.5 - Attachment" , A. Vedamuthu, et al., Editors. World Wide Web Consortium (W3C), 4 September 2007. Available at http://www.w3.org/TR/ws-policy-attach.
WSDL11
W3C Note, "Web Services Description Language (WSDL) 1.1" , E. Christensen, et al., Editors. World Wide Web Consortium (W3C), 15 March 2001 Available at http://www.w3.org/TR/2001/NOTE-wsdl-20010315.
XML Infoset
W3C Recommendation, "XML Information Set (Second Edition)" , J. Cowan, R. Tobin, Editors. World Wide Web Consortium (W3C), 4 February 2004. Available at http://www.w3.org/TR/xml-infoset.
XMLSchema - Part 1
W3C Recommendation, "XML Schema Part 1: Structures (Second Edition)" , H. Thompson, et al., Editors. World Wide Web Consortium (W3C), 28 October 2004. Available at http://www.w3.org/TR/xmlschema-1/.
XMLSchema - Part 2
W3C Recommendation, "XML Schema Part 2: Datatypes (Second Edition)" , P. Biron, A. Malhotra, Editors. World Wide Web Consortium (W3C), 28 October 2004. Available at http://www.w3.org/TR/xmlschema-2/.

10.2 Informative References

WS-Fragment
W3C Working Group Draft, "Web Services Fragment (WS-Fragment) 1.0" , D. Davis, et al., Editors. World Wide Web Consortium (W3C), 15 September 2009. Available at http://www.w3.org/TR/ws-fragment.
WS-MetadataExchange
W3C Working Group Draft, "Web Services Metadata Exchange (WS-MetadataExchange) 1.1" , D. Davis, et al., Editors. World Wide Web Consortium (W3C), 15 September 2009. Available at http://www.w3.org/TR/ws-metadata-exchange.

A XML Schema

A normative copy of the XML Schema [XMLSchema - Part 1], [XMLSchema - Part 2] description for this specification can be retrieved from the following address:

A non-normative copy of the XML schema is listed below for convenience.

<xs:schema 
  targetNamespace='http://www.w3.org/2011/03/ws-tra'
  xmlns:tns='http://www.w3.org/2011/03/ws-tra'
  xmlns:xs='http://www.w3.org/2001/XMLSchema'
  xmlns:wsa='http://www.w3.org/2005/08/addressing'
  elementFormDefault='qualified'
  blockDefault='#all' >
 
  <xs:import
    namespace='http://www.w3.org/2005/08/addressing'
    schemaLocation='http://www.w3.org/2006/03/addressing/ws-addr.xsd' />

  <xs:complexType name='Representation'>
    <xs:sequence>
      <xs:any minOccurs='0' processContents='lax'/>
    </xs:sequence>
    <xs:anyAttribute namespace='##other' processContents='lax'/>
  </xs:complexType>
 
  <xs:element name='Get'>
    <xs:complexType>
      <xs:sequence>
        <xs:any minOccurs='0' maxOccurs='unbounded' namespace='##other' processContents='lax' />
      </xs:sequence>
      <xs:attribute name='Dialect' type='xs:anyURI' use='optional' />
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>

  <xs:element name='GetResponse'>
    <xs:complexType>
      <xs:sequence>
        <xs:element name='Representation' type='tns:Representation' minOccurs='0'/>
        <xs:any minOccurs='1' maxOccurs='unbounded' namespace='##other' processContents='lax' />
      </xs:sequence>
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>
 
  <xs:element name='Put'>
    <xs:complexType>
      <xs:sequence>
        <xs:element name='Representation' type='tns:Representation' minOccurs='0'/>
        <xs:any minOccurs='1' maxOccurs='unbounded' namespace='##other' processContents='lax' />
      </xs:sequence>
      <xs:attribute name='Dialect' type='xs:anyURI' use='optional' />
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>

  <xs:element name='PutResponse'>
    <xs:complexType>
      <xs:sequence>
        <xs:element name='Representation' type='tns:Representation' minOccurs='0'/>
        <xs:any minOccurs='1' namespace='##other' processContents='lax' />
      </xs:sequence>
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>
 
  <xs:element name='Delete'>
    <xs:complexType>
      <xs:sequence>
        <xs:any minOccurs='0' maxOccurs='unbounded' namespace='##other' processContents='lax' />
      </xs:sequence>
      <xs:attribute name='Dialect' type='xs:anyURI' use='optional' />
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>

  <xs:element name='DeleteResponse'>
    <xs:complexType>
      <xs:sequence>
        <xs:any minOccurs='0' namespace='##other' processContents='lax' />
      </xs:sequence>
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>
 
  <xs:element name='Create'>
    <xs:complexType>
      <xs:sequence>
        <xs:element name='Representation' type='tns:Representation' minOccurs='0'/>
        <xs:any minOccurs='0' maxOccurs='unbounded' namespace='##other' processContents='lax' />
      </xs:sequence>
      <xs:attribute name='Dialect' type='xs:anyURI' use='optional' />
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>
 
  <xs:element name='CreateResponse'>
    <xs:complexType>
      <xs:sequence>
        <xs:element name='ResourceCreated' type='wsa:EndpointReferenceType' />
        <xs:element name='Representation' type='tns:Representation' minOccurs='0'/>
        <xs:any minOccurs='0' namespace='##other' processContents='lax' />
      </xs:sequence>
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>

  <!-- Policy -->
  <xs:complexType name='URI'>
    <xs:simpleContent>
      <xs:extension base='xs:anyURI'>
        <xs:anyAttribute namespace='##other' processContents='lax'/>
      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>

  <xs:complexType name='QName'>
    <xs:simpleContent>
      <xs:extension base='xs:QName'>
        <xs:anyAttribute namespace='##other' processContents='lax'/>
      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>

  <xs:complexType name='Empty'>
    <xs:sequence/>
    <xs:anyAttribute namespace='##other' processContents='lax'/>
  </xs:complexType>

  <xs:element name='TransferResource'>
    <xs:complexType>
      <xs:sequence>
        <xs:element name='PutOperationSupported' type='tns:Empty'
                                                 minOccurs='0'/>
        <xs:element name='DeleteOperationSupported' type='tns:Empty'
                                                    minOccurs='0'/>
        <xs:element name='FaultOnPutDenied' type='tns:Empty' minOccurs='0'/>
        <xs:element name='Dialect' minOccurs='0' maxOccurs='unbounded'>
          <xs:complexType>
            <xs:sequence>
              <xs:any namespace='##other' processContents='lax' minOccurs='0'
                                          maxOccurs='0'/>
            </xs:sequence>
            <xs:attribute name='URI' type='xs:anyURI' use='required' />
            <xs:anyAttribute namespace="##other" processContents='lax'/>
          </xs:complexType>
        </xs:element>
        <xs:element name='Resource' type='tns:QName' minOccurs='0'/>
        <xs:any namespace='##other' processContents='lax' minOccurs='0'
                                    maxOccurs='unbounded'/>
      </xs:sequence>
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>

  <xs:element name='TransferResourceFactory'>
    <xs:complexType>
      <xs:sequence>
        <xs:element name='Resource' type='tns:QName' minOccurs='0'/>
        <xs:element name='Dialect' minOccurs='0' maxOccurs='unbounded'>
          <xs:complexType>
            <xs:sequence>
              <xs:any namespace='##other' processContents='lax' minOccurs='0'
                                          maxOccurs='0'/>
            </xs:sequence>
            <xs:attribute name='URI' type='xs:anyURI' use='required' />
            <xs:anyAttribute namespace="##other" processContents='lax'/>
          </xs:complexType>
        </xs:element>
        <xs:any namespace='##other' processContents='lax' minOccurs='0'
                                    maxOccurs='unbounded'/>
      </xs:sequence>
      <xs:anyAttribute namespace='##other' processContents='lax' />
    </xs:complexType>
  </xs:element>
 
</xs:schema>

B WSDL

A normative copy of the WSDL [WSDL11] description for this specification can be retrieved from the following address:

A non-normative copy of the WSDL description is listed below for convenience.

<wsdl:definitions 
    targetNamespace='http://www.w3.org/2011/03/ws-tra' 
    xmlns:tns='http://www.w3.org/2011/03/ws-tra' 
    xmlns:wsa='http://www.w3.org/2005/08/addressing'
    xmlns:wsam='http://www.w3.org/2007/05/addressing/metadata'
    xmlns:wsdl='http://schemas.xmlsoap.org/wsdl/' 
    xmlns:xs='http://www.w3.org/2001/XMLSchema'>
 
  <wsdl:types>
    <xs:schema>
      <xs:import 
        namespace='http://www.w3.org/2011/03/ws-tra'
        schemaLocation='http://www.w3.org/2011/03/ws-tra/transfer.xsd'
        />
    </xs:schema>
  </wsdl:types>
 
  <wsdl:message name='GetMessage'>
    <wsdl:part name='Body' element='tns:Get'/>
  </wsdl:message>
  <wsdl:message name='GetResponseMessage'>
    <wsdl:part name='Body' element='tns:GetResponse'/>
  </wsdl:message>
 
  <wsdl:message name='PutMessage'>
    <wsdl:part name='Body' element='tns:Put'/>
  </wsdl:message>
  <wsdl:message name='PutResponseMessage'>
    <wsdl:part name='Body' element='tns:PutResponse'/>
  </wsdl:message>
 
  <wsdl:message name='DeleteMessage'>
    <wsdl:part name='Body' element='tns:Delete'/>
  </wsdl:message>
  <wsdl:message name='DeleteResponseMessage'>
    <wsdl:part name='Body' element='tns:DeleteResponse'/>
  </wsdl:message>
 
  <wsdl:message name='CreateMessage'>
    <wsdl:part name='Body' element='tns:Create'/>
  </wsdl:message>
  <wsdl:message name='CreateResponseMessage'>
    <wsdl:part name='Body' element='tns:CreateResponse'/>
  </wsdl:message>
 
  <wsdl:portType name='Resource'>
    <wsdl:documentation>
      This port type defines a resource that can be read, 
      written, and deleted.
    </wsdl:documentation>
    <wsdl:operation name='Get'>
      <wsdl:input 
        message='tns:GetMessage'
        wsam:Action='http://www.w3.org/2011/03/ws-tra/Get'/>
      <wsdl:output 
        message='tns:GetResponseMessage'
        wsam:Action='http://www.w3.org/2011/03/ws-tra/GetResponse' />
    </wsdl:operation>
    <wsdl:operation name='Put'>
      <wsdl:input 
        message='tns:PutMessage'
        wsam:Action='http://www.w3.org/2011/03/ws-tra/Put' />
      <wsdl:output 
        message='tns:PutResponseMessage'
        wsam:Action='http://www.w3.org/2011/03/ws-tra/PutResponse' />
    </wsdl:operation>
    <wsdl:operation name='Delete'>
      <wsdl:input 
        message='tns:DeleteMessage'
        wsam:Action='http://www.w3.org/2011/03/ws-tra/Delete' />
      <wsdl:output 
        message='tns:DeleteResponseMessage'
        wsam:Action='http://www.w3.org/2011/03/ws-tra/DeleteResponse' />
    </wsdl:operation>
  </wsdl:portType>
 
  <wsdl:portType name='ResourceFactory'>
    <wsdl:documentation>
      This port type defines a Web service that can create new 
      resources.
    </wsdl:documentation>
    <wsdl:operation name='Create'>
      <wsdl:input 
        message='tns:CreateMessage'
        wsam:Action='http://www.w3.org/2011/03/ws-tra/Create' />
      <wsdl:output 
        message='tns:CreateResponseMessage'
        wsam:Action='http://www.w3.org/2011/03/ws-tra/CreateResponse' />
    </wsdl:operation>
  </wsdl:portType>
   
</wsdl:definitions>

C Change Log

Data Author Description
2009/03/04 DD Added resolution of issue 6391
2009/03/04 DD Added resolution of issue 6588
2009/03/04 DD Added resolution of issue 6519
2009/03/09 DD Added resolution of issue 6398
2009/03/11 DD Added change log
2009/03/11 DD Added resolution of issue 6641
2009/03/11 DD Added resolution of issue 6425
2009/03/23 DD Added resolution of issue 6666
2009/03/24 DD Added resolution of issue 6648
2009/04/20 DD Added resolution of issue 6730
2009/04/22 KW Added resolution of issue 6739
2009/05/12 DD Added resolution of issue 6433
2009/05/13 DD Added resolution of issues 6672, 6673, 6594
2009/05/19 DD Added resolution of issue 6849
2009/05/19 DD Added resolution of issue 6907
2009/05/21 DD Added resolution of issue 6674
2009/05/27 DD Added resolution of issue 6906
2009/06/10 DD Added resolution of issue 6712
2009/06/10 DD Added resolution of issue 6924
2009/07/07 DD Added resolution of issues 7014, 6975, 6413
2009/08/05 DD Added resolution of issue 7159
2009/08/18 DD Added resolution of issue 7206
2009/08/18 DD Added resolution of issue 7191
2009/08/25 DD Added resolution of issue 7365
2009/08/25 DD Added resolution of issue 7270
2009/09/01 DD Added resolution of issue 6704
2009/09/02 DD Added resolution of issue 6694
2009/09/02 DD Added resolution of issue 6533
2009/09/16 DD Added resolution of issue 7486
2009/09/23 DD Added resolution of issue 6572
2009/10/02 DD Added resolution of issue 7426
2009/10/05 DD Added resolution of issue 7731, 6721
2009/10/13 DD Added resolution of issue 7812
2009/10/13 DD Added resolution of issue 7827
2009/10/20 DD Added resolution of issue 7068
2009/10/20 DD Added resolution of issue 7968
2009/10/20 DD Added resolution of issue 7207
2009/11/05 DD Added resolution of issue 7912
2009/11/06 DD Added resolution of issue 8177
2009/11/06 DD Added resolution of issue 8186
2009/11/06 DD Added resolution of issue 8184
2009/11/06 DD Added resolution of issue 8124
2009/11/06 DD Added resolution of issue 8179
2009/11/17 DD Added resolution of issue 8280
2009/12/01 DD Added resolution of issue 8201
2010/01/05 DD Added resolution of issue 8183
2010/01/12 DD Added resolution of issue 8300
2010/01/12 DD Added resolution of issue 8303
2010/01/12 DD Added resolution of issue 8176
2010/01/19 DD Added resolution of issue 8301
2010/01/19 DD Added resolution of issue 8283
2010/01/26 DD Added resolution of issue 7774
2010/01/28 DD Added resolution of issues 8302, 8180, 8299
2010/02/09 DD Added resolution of issue 8160
2010/02/09 DD Added resolution of issue 8298
2010/02/16 DD Added resolution of issue 9032
2010/03/09 DD Added resolution of issue 6463, 8031, 8198
2010/03/30 DD Added resolution of issue 9266
2010/05/04 DD Added resolution of issue 9588
2010/05/04 DD Added resolution of issue 9087
2010/05/11 DD Added resolution of issue 9569
2010/05/11 DD Added resolution of issue 9699
2010/08/17 DD Added resolution of issue 10339
2010/11/16 DD Added resolution of issue 11202
2010/11/16 DD Added resolution of issue 11210
2010/11/19 DD Added resolution of issue 8284
2011/02/01 DD Added resolution of issue 11882
2011/02/07 DD Added resolution of issue 11899
2011/02/15 DD Added resolution of issue 11766
2011/02/15 DD Added resolution of issue 12063