W3C

RDF/A Syntax

A collection of attributes for layering RDF on XML languages

Editor's Draft 27 October 2005

This version:
http://www.w3.org/2001/sw/BestPractices/HTML/2005-rdfa-syntax
Latest version:
http://www.w3.org/2006/07/SWD/RDFa/syntax
Previous version:
http://www.w3.org/MarkUp/2004/rdf-a.html
Editors:
Mark Birbeck, x-port.net Ltd. <Mark.Birbeck@x-port.net>
Steven Pemberton, CWI
Ben Adida, Creative Commons <ben@creativecommons.org>

Abstract

The aim of this document is to outline a syntax for layering RDF information on any XML document, via attributes.

Status of this Document

This is an internal draft produced by the RDF-in-HTML task force [RDFHTML], a joint task force of the Semantic Web Best Practices and Deployment Working Group [SWBPD-WG] and HTML Working Group [HTML-WG].

Last Modified: 2005-10-27

Table of Contents

1 Motivation
2 Terms and Abbrevations
    2.1 Namespaces
    2.2 RDF Terminology
        2.2.1 N-Triples
    2.3 Using xml:base
    2.4 Using CURIEs
3 Introduction to the structure of RDF/A
    3.1 General Approach
    3.2 Qualifying document components
    3.3 Relating document components
    3.4 Global RDF statements
4 RDF/A in detail
    4.1 Processing
    4.2 Establishing the predicate
        4.2.1 Using the property attribute
        4.2.2 Using the rel attribute
        4.2.3 Using the rev attribute
        4.2.4 Using both rel and rev attribute
    4.3 Establishing the subject
        4.3.1 The about attribute
        4.3.2 Inheriting the about attribute
        4.3.3 meta and link elements
            4.3.3.1 meta or link inside the head in XHTML2
    4.4 Establishing the object
        4.4.1 Literal object resolution using the content attribute
        4.4.2 URI object resolution using the href attribute
    4.5 Summary
5 RDF Concepts
    5.1 Literals as Objects
        5.1.1 Without datatype
            5.1.1.1 XML Literals
            5.1.1.2 Language Tags
        5.1.2 With datatype
            5.1.2.1 Literal from string value of meta
    5.2 Blank nodes
    5.3 Reification
6 Examples
    6.1 Creative Commons
    6.2 FOAF
7 Rules
8 Bibliography
9 Change History


1 Motivation

RDF/XML [RDF-SYNTAX] provides sufficient flexibility to represent all of the abstract concepts in RDF [RDF-CONCEPTS]. However, it presents two challenges; first it is difficult or impossible to validate documents that contain RDF/XML using XML Schemas or DTD's, which makes it difficult to import RDF/XML into other markup languages. Whilst newer schema languages such as RELAX NG [RELAXNG] do provide a way to validate documents that contain arbitrary RDF/XML, it will be a while before they gain wide support.

Second, even if one could add RDF/XML directly into an XML dialect like XHTML, there would be significant data duplication between the actual data and the RDF/XML metadata. It would be far better to add RDF to a document without repeating the document's existing data. For example, an XHTML document that explicitly renders its author's name "Mark Birbeck" should not need to repeat this name for RDF expression of the same concept: the existing markup should be augmentable to RDF with minimal data repetition.

In the past, some attributes were 'hard-wired' directly into the markup language to represent specific concepts. For example, in XHTML 1.1 and HTML there is a cite attribute. The attribute allows an author to add information to a document to indicate the origin of a quote. The following example comes from [HTML], although it has been reformatted as XHTML [XHTML]:

<blockquote cite="http://www.example.com/tolkien/twotowers.html">
    <p>They went in single file, running like hounds on a strong scent,
    and an eager light was in their eyes. Nearly due west the broad
    swath of the marching Orcs tramped its ugly slot; the sweet grass
    of Rohan had been bruised and blackened as they passed.</p>
</blockquote>
        

The problem here is that we have had to add a specific attribute to designate citation, and further, both the browser and some metadata processor need to have knowledge of this attribute, and its position within the mark-up.

The RDF/XML solution is to take the citation out as a specific statement about the quote. Our source document may now look like this:

<blockquote id="q1">
    <p>They went in single file, running like hounds on a strong scent,
    and an eager light was in their eyes. Nearly due west the broad
    swath of the marching Orcs tramped its ugly slot; the sweet grass
    of Rohan had been bruised and blackened as they passed.</p>
</blockquote>
        

and the RDF/XML looks like this:

<rdf:Description about="#q1">
  <xh11:cite href="http://www.example.com/tolkien/twotowers.html" />
</rdf:Description>
        

Whilst this approach gives unlimited flexibility, it has not been widely adopted outside the RDF community. Part of the reason is the complexity of RDF/XML. A more fundamental problem is that RDF/XML often requires duplicating data already expressed in the original XML dialect. The motivation of RDF/A was to devise a means by which documents could be augmented with metadata, using property values from the growing range of available taxonomies, reusing existing content from the host language. In RDF/A, one way that the example given above could be marked-up is as follows:

<blockquote>
    <link rel="dc:source" href="http://www.example.com/tolkien/twotowers.html" />
    <p>They went in single file, running like hounds on a strong scent,
    and an eager light was in their eyes. Nearly due west the broad
    swath of the marching Orcs tramped its ugly slot; the sweet grass
    of Rohan had been bruised and blackened as they passed.</p>
</blockquote>
        

Or, if the publisher wishes to give the user a clickable link with the same embedded RDF:

<blockquote>
    taken from <a rel="dc:source"
		  href="http://www.example.com/tolkien/twotowers.html">
      Tolkien's Two Towers</a>.
    <p>They went in single file, running like hounds on a strong scent,
    and an eager light was in their eyes. Nearly due west the broad
    swath of the marching Orcs tramped its ugly slot; the sweet grass
    of Rohan had been bruised and blackened as they passed.</p>
</blockquote>
        

We feel this proposal contributes to standardisation, and takes the pressure off language authors to anticipate all the metadata requirements users of their language might have -- in this example we have used "source" from the Dublin Core [DC] list, rather than inventing our own citation attribute which would be unknown to other languages. For example, the source could still be determined if the same quote were marked-up in SVG:

<svg:text>
    <link rel="dc:source" href="http://www.example.com/tolkien/twotowers.html" />
    They went in single file, running like hounds on a strong scent,
    and an eager light was in their eyes. Nearly due west the broad
    swath of the marching Orcs tramped its ugly slot; the sweet grass
    of Rohan had been bruised and blackened as they passed.
</svg:text>
        

We feel these aspects of our proposal are crucial to the future of the Semantic Web, and the place of mark-up documents within it.

This proposal therefore outlines a new XML syntax for RDF that relies only on XML attributes, and so can be easily imported into other markup languages allowing them to carry arbitrary RDF.

2 Terms and Abbrevations

2.1 Namespaces

In the following examples, for brevity assume that the following namespace prefixes are defined:
cc:http://web.resource.org/cc/
dc:http://purl.org/dc/elements/1.1/
ex:http://example.org/
foaf:http://xmlns.com/foaf/0.1/
rdf:http://www.w3.org/1999/02/22-rdf-syntax-ns#
rdfs:http://www.w3.org/2000/01/rdf-schema#
svg:http://www.w3.org/2000/svg
xh11:http://www.w3.org/1999/xhtml
xsd:http://www.w3.org/2001/XMLSchema#

2.2 RDF Terminology

This document uses the following terminology defined in [RDF-CONCEPTS]:

  • URI reference

  • literal

  • plain literal

  • typed literal

  • XML literal

  • XML value

  • node

  • blank node

  • triple

  • RDF graph

We also add two further concepts, an [RDF/A element] and the [context statement] both of which are explained in the processing section.

The aim of RDF/A is to allow [RDF graph]s to be carried in XML documents of any type. An [RDF graph] comprises [node]s linked by relationships. The basic unit of a graph is a [triple], in which a subject [node] is linked to an object [node] via a [predicate]. The subject [node] is always either an [RDF URI reference] or a [blank node], the predicate is always an [RDF URI reference], and the object of a statement can be an [RDF URI reference], a [literal], or a [blank node].

In RDF/A, a subject [RDF URI reference] is indicated using the attribute about and predicates are represented using one of the attributes property, rel, or rev. Objects which are [RDF URI reference]s are represented using the attribute href, whilst objects that are [literal]s are represented either with the attribute content, or the content of the element in question.

2.2.1 N-Triples

Most of the examples in this document are shown translated into N-Triples [N-TRIPLES] syntax, with a slight variation in that QNames can be used to replace a URI reference. To tell them apart, the QName will have no angle brackets, e.g. the triple:

<http://internet-apps.blogspot.com/> dc:creator "Mark Birbeck" .
                    

should be read as an abbreviation for the N-Triples syntax:

<http://internet-apps.blogspot.com/>
  <http://purl.org/dc/elements/1.1/creator>
  "Mark Birbeck" .
                     

Datatypes can also be abbreviated, so the following:

<> dc:title
   "E = mc<sup>2</sup>: The Most Urgent Problem of Our Time"^^rdf:XMLLiteral .
                    

should be read as an abbreviation for this N-Triples statement:

<> <http://purl.org/dc/elements/1.1/creator>
   "E = mc<sup>2</sup>: The Most Urgent Problem of Our Time"^^<http://www.w3.org/1999/02/22-rdf-syntax-ns#XMLLiteral> .
                     

2.3 Using xml:base

All [RDF URI references] are subject to xml:base [XML-BASE]. Note that this means that in the absence of an xml:base attribute, the document containing the RDF statements is itself the base.

An example follows to show how xml:base affects the subject:

<span xml:base="http://internet-apps.blogspot.com/">
    <link about="" rel="dc:creator" href="http://www.blogger.com/profile/1109404" />
    <meta property="dc:title" content="Internet Applications" />
</span>
                

The triples generated would be as follows:

<http://internet-apps.blogspot.com/>
   dc:creator 
   <http://www.blogger.com/profile/1109404> .
<http://internet-apps.blogspot.com/>
   dc:title
   "Internet Applications" .
                

2.4 Using CURIEs

In order to allow for the compact expression of RDF statements, RDF/A uses CURIEs (Compact URIs) [CURIE]. The rel, rev, and property attributes accept CURIE-only datatypes, while href and about accept mixed CURIE/URI data. In particular, the following notation is a valid RDF/A statement:

This document is licensed under a 
<a xmlns:cclicenses="http://creativecommons.org/licenses/"
   rel="cc:license"
   href="[cclicenses:by/nc-nd/2.5/]">
  Creative Commons License
</a>.
              

which generates the following triple, as expected:

<> cc:license <http://creativecommons.org/licenses/by/nc-nd/2.5/> .
              

3 Introduction to the structure of RDF/A

3.1 General Approach

The main idea behind the syntax for RDF/A is that existing data should be easy to update to convey RDF triples. Thus, the bulk of RDF/A can be expressed using only attributes applied to existing elements within the XML document, specifically about, rel, rev, property, and content. In addition, it should be possible to represent a [triple] using only one XML element. In this way it owes more to 'flat' syntaxes like RDF/N3 [N3-PRIMER] than it does to RDF/XML [RDF-SYNTAX], despite its use of XML.

For example, given an XHTML chunk as follows:

This photo was taken by
<span class="author">Mark Birbeck</span>.
          

a simple attribute augmentation can yield an RDF triple:

This photo was taken by
<span class="author" about="photo1.jpg" property="dc:creator">Mark Birbeck</span>.
          

which yields:

<photo1.jpg> dc:creator "Mark Birbeck"^^rdf:XMLLiteral .
          

Note that, in the above example, had "Mark Birbeck" not been enclosed in an existing span element, a new one could have simply been used with about and property as its only two attributes.

Similarly, links can be augmented to express RDF triples. Consider an XHTML chunk:

This photo was taken by
<a href="http://www.blogger.com/profile/1109404">Mark Birbeck</a>.
          

When the RDF object is a URI, the RDF predicate is designated using rel:

This photo was taken by
<a about="photo1.jpg" rel="dc:creator" 
   href="http://www.blogger.com/profile/1109404">Mark Birbeck</a>.
          

which yields:

<photo1.jpg> dc:creator <http://www.blogger.com/profile/1109404> .
          

It's important to note that the various RDF/A attributes can be used on any existing element of the XML dialect. Note also that one can express a reverse relationship using the rev attribute. For example, if the photo in question is actually a depiction of Mark, one could write:

This photo was taken by
<a about="photo1.jpg" rev="foaf:img" 
   href="http://www.blogger.com/profile/1109404">Mark Birbeck</a>.
          

which would yield:

<http://www.blogger.com/profile/1109404> foaf:img <photo1.jpg> .
          

Both relations can be expressed simultaneously:

This photo was taken by
<a about="photo1.jpg" rel="dc:creator" rev="foaf:img"
   href="http://www.blogger.com/profile/1109404">Mark Birbeck</a>.
           

which then yields both triples:

<photo1.jpg> dc:creator <http://www.blogger.com/profile/1109404> .
<http://www.blogger.com/profile/1109404> foaf:img <photo1.jpg> .
           

And it's also possible to go further and add the attributes used for denoting statements in which the object is a [literal]:

This photo was taken by
<a about="photo1.jpg" property="dc:title"
   content="Portrait of Mark" rel="dc:creator"
   rev="foaf:img" href="http://www.blogger.com/profile/1109404">Mark Birbeck</a>.
           

which would then yield:

<photo1.jpg> dc:creator <http://www.blogger.com/profile/1109404> .
<http://www.blogger.com/profile/1109404> foaf:img <photo1.jpg> .
<photo1.jpg> dc:title "Portrait of Mark" .
           

It's possible to do all of this without ambiguity, since the property attribute always denotes a predicate in a statement in which the object is a [literal], whilst the rel and rev attributes always denote a predicate in a statement in which the object is a [URI reference]. Put a different way, property always works with content, whilst rel and rev work with href.

Of course, the more natural way to express the three above triples is to strive to make all metadata literals and URIs meaningful within the host XML dialect. Specifically, in the case of XHTML2, it makes sense to render as much of the useful metadata as possible and use RDF/A to mark up this rendered data. The following XHTML thus generates the same triples shown above.

This photo, entitled 
<span about="photo1.jpg" property="dc:title">Portrait of Mark</span>
was taken by
<a about="photo1.jpg" rel="dc:creator" rev="foaf:img"
   href="http://www.blogger.com/profile/1109404">Mark himself</a>.
           

As expected, an empty string in the about attribute designates the current URI. In addition, the value of the about attribute is inherited from parent elements. The following XHTML thus generates the very same triples as the XHTML above.

<div about="photo1.jpg">
  This photo, entitled
  <span property="dc:title">Portrait of Mark</span>
  was taken by
  <a rel="dc:creator" rev="foaf:img" 
     href="http://www.blogger.com/profile/1109404">Mark himself</a>.
</div>
           

3.2 Qualifying document components

A second feature of RDF/A is that it is possible to use parts of the host document to provide the [subject] of a [triple]. This marks RDF/A from other approaches to serialising RDF, in that the the same syntax can now be used to make statements about parts of a document, and external documents.

It is possible to make such statements using the syntax introduced in the examples above:

<html xmlns:dc="http://purl.org/dc/elements/1.1/">
    <head>
        <title>On <em>Crime and Punishment</em></title>
    </head>
    <body>
        <blockquote id="q1" about="#q1" rel="dc:source" href="urn:isbn:0140449132" >
            <p>
                Rodion Romanovitch! My dear friend! If you go on in this way
                you will go mad, I am positive! Drink, pray, if only a few drops!
            </p>
        </blockquote>
    </body>
</html>
           

However, two problems arise: the href causes the entire quotation to become a clickable link, which may not be the desired visual effect, and only one triple can be expressed. Thus, RDF/A provides another mechanism, using the special link or meta element without a specified [subject]. In such cases, the [triple] concerns the parent element. This allows the example above to be recast as follows:

<html xmlns:dc="http://purl.org/dc/elements/1.1/">
    <head>
        <title>On <em>Crime and Punishment</em></title>
    </head>
    <body>
        <blockquote id="q1">
            <link rel="dc:source" href="urn:isbn:0140449132" />
            <p>
                Rodion Romanovitch! My dear friend! If you go on in this way
                you will go mad, I am positive! Drink, pray, if only a few drops!
            </p>
        </blockquote>
    </body>
</html>
          

This syntax (omitting the about attribute to refer to the parent element) only applies to the elements link and meta, which means that even without an id attribute, the following statement is still 'about' the blockquote element, and not the document as a whole:

<blockquote>
    <link rel="dc:source" href="urn:isbn:0140449132" />
    <p>
        Rodion Romanovitch! My dear friend! If you go on in this way
        you will go mad, I am positive! Drink, pray, if only a few drops!
    </p>
</blockquote>
          

If more than one piece of metadata needs to be attached to the same element, then additional link or meta elements can be added:

<blockquote>
       <link rel="dc:source" href="urn:isbn:0140449132" />
       <meta property="dc:creator" content="Fyodor Dostoevsky" />
       <p>
            Rodion Romanovitch! My dear friend! If you go on in this way
            you will go mad, I am positive! Drink, pray, if only a few drops!
       </p>
</blockquote>
          

Now we have attached two pieces of metadata to the blockquote element -- the source of the quote, and its author.

Note:

We say nothing here about how this metadata is used. In the previous example, the information may be of use to an RDF/A-aware browser, and it could be made available to the user accessing the page via a mechanism such as tooltips. But it may also be the case that the document is parsed by some external processor and the output stored as a set of [triple]s. In the latter case the [triple]s generated by the previous example would have a [unique anonymous ID] as the subject of each statement, as follows:

_:a dc:source <urn:isbn:0140449132> .
_:a dc:creator "Fyodor Dostoevsky" .
            

If one wishes a non-anonymous node to represent the blockquote, one only needs to add an additional attribute to the blockquote, namely the usual XML id attribute:

<blockquote id="q1">
       <link rel="dc:source" href="urn:isbn:0140449132" />
       <meta property="dc:creator" content="Fyodor Dostoevsky" />
       <p>
            Rodion Romanovitch! My dear friend! If you go on in this way
            you will go mad, I am positive! Drink, pray, if only a few drops!
       </p>
</blockquote>
            

which then yields:

<#q1> dc:source <urn:isbn:0140449132> .
<#q1> dc:creator "Fyodor Dostoevsky" .
            

3.3 Relating document components

Using qualifying statements, RDF/A allows a single XML dialect document to include multiple RDF entities. Relations between the various entities of a given page can also be defined using RDF/A notation.

Consider the following XHTML, which defines two RDF entities of type taxo:topic, two RDF entities of type biblio:Publication, metadata pertinent to each publication, including dc:title and dc:creator, and relations of type taxo:topics between the publications and tags:

<html xmlns:dc="http://purl.org/dc/elements/1.1/">
    <head>
        <title>Mark's Publications</title>
    </head>
    <body>

       <h2>Tags</h2>
       <div id="tag_standards">
          <link rel="rdf:type" href="[taxo:topic]" />
          Standards
       </div>
       <div id="tag_xforms">
          <link rel="rdf:type" href="[taxo:topic]" />
          XForms
       </div>

       <h2>Publications</h2>
       <div id="publication_1">
         <link rel="rdf:type" href="biblio:Publication" />
         <link rel="dc:creator" href="http://www.blogger.com/profile/1109404" />
         <meta property="dc:title">A Standards-Based Virtual Machine</meta>
         <link rel="taxo:topics" href="#tag_standards" />
       </div>
       <div id="publication_2">
         <link rel="rdf:type" href="biblio:Publication" />
         <link rel="dc:creator" href="http://www.blogger.com/profile/1109404" />
         <meta property="dc:title">XForms and Internet Applications</meta>
         <link rel="taxo:topics" href="#tag_standards" />
         <link rel="taxo:topics" href="#tag_xforms" />
       </div>
    </body>
</html>
          

This yields the expected triples:

<#tag_standards> rdf:type taxo:topic .
<#tag_xforms> rdf:type taxo:topic .

<#publication_1> rdf:type biblio:Publication .
<#publication_1> dc:creator <http://www.blogger.com/profile/1109404>
<#publication_1> dc:title "A Standards-Based Virtual Machine" .
<#publication_1> taxo:topics <#tag_standards> .

<#publication_2> rdf:type biblio:Publication .
<#publication_2> dc:creator <http://www.blogger.com/profile/1109404>
<#publication_2> dc:title "XForms and Internet Applications" .
<#publication_2> taxo:topics <#tag_standards> .
<#publication_2> taxo:topics <#tag_xforms> .
          

Beyond this theoretical example, this application of RDF/A is particularly useful for formats like FOAF. (See examples.)

3.4 Global RDF statements

The previous series of examples may mislead one to think that RDF/A statements are only contextual, only meant to qualify existing elements. However, as the first examples implied, a fixed about attribute can be used to specify a global subject. It is actually quite easy to make independent, global RDF statements. Statements like:

This document is licensed under a 
<a about="" rel="cc:license" 
   href="http://creativecommons.org/licenses/by-nc-nd/2.5/">
  Creative Commons
</a>.
          

will produce the same triple no matter where they're located in the document:

<> cc:license <http://creativecommons.org/licenses/by-nc-nd/2.5/> .
          

4 RDF/A in detail

In this section we look in more detail at the [triple]s that are generated when using RDF/A attributes and elements. We've already said that the aim is to make it possible to generate a [triple] with one element. However, we also saw that parent elements may have an effect on the triple represented by their children elements. We therefore need to understand how the subject, predicate and object parts of a [triple] are established from our syntax.

4.1 Processing

An [RDF/A element] is defined as any XML element that contains one or more RDF/A attributes: about, property, rel, rev, href, content. Processing proceeds by examining each [RDF/A element] in turn. The [RDF/A element] under consideration at any time is the [current statement], and its parent element is the [context statement]. Note that the [context statement] does not need to be an [RDF/A element]. RDF/A also includes a datatype attribute. The presence of that attribute does not by itself designate an [RDF/A element].

As each [RDF/A element] is examined, the processor tries to establish the RDF triples it generates. There is exactly one triple generated per rel, rev, or property attribute. Thus, an [RDF/A element] can generate at most 3 RDF triples, one for each of those three attributes. (For now, we do not consider the effects of reification.) It makes sense, then, for the processor to start with identifying the predicate of a triple, then to figure out the triple's subject and object.

4.2 Establishing the predicate

The predicate of a statement is specified using a property, rel or rev attribute. These attributes can be placed on any element in a document, and -- although readability may suffer -- can even co-exist on the same element. The processor rule is simple: each of these attributes generates exactly one triple. The specific type of predicate indicates the type of resolution to use for the subject and object of the triple.

4.2.1 Using the property attribute

A property attribute indicates a new statement whose predicate is the value of that attribute. The subject of the triple will be decided using subject resolution (Section 4.3). The object of the triple will be decided using [literal] object resolution (Section 4.4). The following example indicates the name of the author responsible for the text being quoted:

<blockquote>
    <meta property="dc:creator" content="Fyodor Dostoevsky" />
    <p>
        Rodion Romanovitch! My dear friend! If you go on in this way
        you will go mad, I am positive! Drink, pray, if only a few drops!
    </p>
</blockquote>
            

4.2.2 Using the rel attribute

A rel attribute indicates a new statement whose predicate is the value of that attribute. The subject of the triple will be decided using subject resolution (Section 4.3). The object of the triple will be decided using [URI reference] object resolution (Section 4.4). The following example indicates that one 'FOAF person' knows another:

<link about="mailto:daniel.brickley@bristol.ac.uk"
      rel="foaf:knows" href="mailto:libby.miller@bristol.ac.uk" />
            

The triple generated is:

<mailto:daniel.brickley@bristol.ac.uk>
  foaf:knows
  <mailto:libby.miller@bristol.ac.uk> .
            

4.2.3 Using the rev attribute

A rev attribute indicates a new statement whose predicate is the value of that attribute. The subject of the triple will be decided using [URI reference] object resolution (Section 4.4). The object of the triple will be decided using subject resolution (Section 4.3). Note that resolution is effectively the same as if the rev attribute had been a rel attribute with object and subject reversed. The following example indicates that one 'FOAF person' knows another:

<link about="mailto:daniel.brickley@bristol.ac.uk"
      rev="foaf:knows" href="mailto:libby.miller@bristol.ac.uk" />
            

and the [triple] generated is essentially a reversal of our previous example:

<mailto:libby.miller@bristol.ac.uk>
  foaf:knows
  <mailto:daniel.brickley@bristol.ac.uk> .
            

4.2.4 Using both rel and rev attribute

It is perfectly acceptable to use both rel and rev attributes within the same element. According to the rule that every predicate generates a triple, this approach predictably yields two triples. For example:

<link about="mailto:daniel.brickley@bristol.ac.uk" 
      rel="foaf:knowns" rev="foaf:knows" href="mailto:libby.miller@bristol.ac.uk" />
            

generates:

<mailto:libby.miller@bristol.ac.uk>
  foaf:knows 
  <mailto:daniel.brickley@bristol.ac.uk> .
<mailto:daniel.brickley@bristol.ac.uk> 
  foaf:knows
  <mailto:libby.miller@bristol.ac.uk> .
            

The predicates need not be the same, of course.

4.3 Establishing the subject

Once a predicate has been established, subject resolution can begin, using as a basis the [RDF/A element] that contains the predicate-generating attribute. The [context statement] may also be relevant in determining the subject. If the predicate was established using the property or rel attribute, then the subject is determined by the about attribute, including inheritance and some exceptions for meta and link elements, as detailed in this section. If the predicate was established using the rev attribute, then the subject is determined using object resolution in the next section.

4.3.1 The about attribute

The subject of a triple is usually indicated using the about attribute, as follows:

<link about="mailto:daniel.brickley@bristol.ac.uk"
      rel="foaf:knows" href="mailto:libby.miller@bristol.ac.uk" />
<link about="mailto:libby.miller@bristol.ac.uk"
      rel="foaf:knows" href="mailto:ian.sealy@bristol.ac.uk" />
            

The value of the about attribute is of type CURIE/URI [REF], meaning it can either be a URI, absolute or relative, or a CURIE in square brackets. Some example values of an about attribute include:

  • #person : the base URI with #person appended to it. Refers to the XML element with id="person", if such an element exists.
  • http://creativecommons.org/licenses/by-nc-nd/2.5/ : the absolute URI as indicated.
  • [finance:GOOG] : the CURIE finance:GOOG.

4.3.2 Inheriting the about attribute

Note that this section does not apply to [RDF/A statement]s whose predicates are defined in meta or link elements. Section 4.3.3 deals with meta and link specifically.

If the [RDF/A element] that includes the predicate attribute does not have an about attribute, then the subject of the [triple] is determined by the [context statement]'s about attribute. The resolution of the about attribute is recursive: if the [context statement] has no such attribute, then the processor must continue up the DOM tree to find the closest ancestor with an about attribute.

For example, the following XHTML:

<div about="photo1.jpg">
  <span class="attribution-line">this photo was taken by
    <span property="dc:creator">Mark Birbeck</span>
  </span>
</div>
              

will inherit the about attribute from the enclosing div and yield the expected triple:

<photo1.jpg> dc:creator "Mark Birbeck"^^rdf:XMLLiteral .
              

If no such parent is ever found all the way up the DOM tree, then the default value for the about attribute is the empty string, which effectively indicates the current document.

4.3.3 meta and link elements

@@TODO: make sure the treatment of the id attribute is precise here. In particular, what happens with an id attribute on a meta or link.

If an [RDF/A statement] is generated by a predicate attribute of a meta or link element, and this element does not contain an explicit about attribute, subject resolution is slightly different. Only the immediate [context statement] is considered, whether or not it has its own about attribute.

If the [context statement] is a meta or link element itself, the [RDF/A statement] represented by the [context statement] is reified as the subject of this new [RDF/A statement]. More details on reification in RDF/A are found in Section 5.3.

Otherwise, if the [context statement] is neither a meta nor a link, two cases should be considered. The [context statement] may have an about attribute, in which case the [RDF/A statement]'s subject is resolved as the value of this attribute (exactly as if the current [RDF/A statement] weren't a link or meta.) However, if the [context statement] does not have an about attribute, the subject of the current [RDF/A statement] is the parent element itself. If this parent element is not identified with xml:id, it is treated as a [unique anonymous ID].

For example, the following XHTML:

<div about="photo1.jpg">
  This photo was taken by <meta property="dc:creator">Mark Birbeck</meta>.
</div>
              

will generate one triple corresponding to the property attribute of the meta element, whose subject is resolved as the value of the about attribute of the immediate parent element (div).

<photo1.jpg> dc:creator "Mark Birbeck" .
              

However, the following, slightly different, XHTML:

<div about="photo1.jpg">
  <span class="attribution-line">
    This photo was taken by
    <meta property="dc:creator">Mark Birbeck</meta>
  </span>.
</div>
              

will yield the possibly unexpected:

_:span0 dc:creator "Mark Birbeck" .
              

The meta and link elements should be thought of as mechanisms for applying metadata to any existing element in the XML document. Thus, to recover the previous triple, one could simply switch the meta to a span, which will trigger the recursive search up the DOM tree for the closest about attribute (this is exactly the same example as that of the previous section):

<div about="photo1.jpg">
  <span class="attribution-line">
    This photo was taken by
    <span property="dc:creator">Mark Birbeck</span>
  </span>.
</div>
              
4.3.3.1 meta or link inside the head in XHTML2

A meta or link without its own about attribute and positioned directly within the head of a document will automatically apply to the document itself. Effectively, the head of an XHTML2 document contains an implicit about="".

Note also that this isn't exactly the same thing as having the subject eventually default -- all the way up the DOM tree -- to the current document. A meta or link element applies to the parent element, never inheriting further up the tree than the head element, in this case. Thus, this additional detail about the head element is not redundant with any other instruction in this document.

4.4 Establishing the object

The object of the statement can be set using one of the attributes content or href. Which attribute is used depends on how the predicate was set. If the predicate was set using property then the object will be a [literal], and its value will come from the content attribute or the element content. If the predicate was set with the rel attribute, then the object will be a CURIE/URI whose value is obtained from the href attribute. If the predicate was set with the rev attribute, then the object will be obtained using subject resolution as defined in the previous section.

4.4.1 Literal object resolution using the content attribute

The content attribute can be used to indicate a [plain literal] as follows:

<meta about="http://internet-apps.blogspot.com/"
      property="dc:creator" content="Mark Birbeck" />
              

or, alternatively, using the content of the element (meta or other) as an [XMLliteral]:

<span about="http://internet-apps.blogspot.com/"
      property="dc:creator">Mark Birbeck</span>
              

If the element that carries the property attribute also carries a content attribute and is non-empty, the value of the content attribute takes precedence and is taken to be the object of the triple.

More details on determining the type of a literal object are provided in Section 5.1.

4.4.2 URI object resolution using the href attribute

The href attribute on the [RDF/A statement]'s element is used to indicate the object as a [URI reference]. Its type, just like that of the about attribute, is CURIE/URI:

<link about="mailto:daniel.brickley@bristol.ac.uk"
      rel="foaf:knows" href="mailto:libby.miller@bristol.ac.uk" />
              

There is no other way to specify a triple's URI object in RDF/A.

4.5 Summary

This section will contain a summary of the syntax.

5 RDF Concepts

Having established the different parts of the syntax of RDF/A, we will now look at the various aspects of the RDF Abstract Syntax, and see how they can be represented in RDF/A.

5.1 Literals as Objects

When a property predicate is used in RDF/A, the object is expected to be a literal. This literal can be optionally typed by a datatype attribute within the same RDF/A element. The absence or presence of this attribute has a significant impact on the interpretation of the literal.

5.1.1 Without datatype

Without a datatype attribute, the object literal will either be a plain literal or an XML literal, depending on whether the content attribute is used. For example, consider the following XHTML with RDF/A which designates the author of a web page:

<html xmlns="http://www.w3.org/1999/xhtml">
    <head property="dc:creator" content="Mark Birbeck">
        <title>Internet Applications</title>
    </head>
...
              

In this case, with the use of the content attribute indicates that the object is a plain literal:

<> dc:creator "Mark Birbeck" .
              

On the other hand, the following RDF/A will yield a slightly different triple:

<html xmlns="http://www.w3.org/1999/xhtml">
    <head>
        <title>Internet Applications</title>
    </head>
    <body>
	<span property="dc:creator">Mark Birbeck</span>
    </body>
...
              

which yields an XML literal object:

<> dc:creator "Mark Birbeck"^^rdf:XMLLiteral .
              
5.1.1.1 XML Literals

The default rdf:XMLLiteral type plays a significant role. XML documents cannot contain XML mark-up in their attributes, which means it is not possible to represent XML within the content attribute. The following would cause an XML parser to generate an error:

<head about="">
    Author: <span property="dc:creator">Albert Einstein</span><br />
    <meta property="dc:title"
	  content="E = mc<sup>2</sup>: The Most Urgent Problem of Our Time" />
</head>
                

It does not help to escape the content, since the output would simply be a string of text containing numerous ampersands:

<> dc:title
   "E = mc&amp;lt;sup&amp;gt;2&amp;lt;/sup&amp;gt;: The Most Urgent Problem of Our Time" .
                

RDF does, however, provide a datatype for indicating [XML literal]s. RDF/A therefore adds this datatype to any [literal] that is indicated using child text nodes on the [RDF/A statement]. For example:

<head about="">
    Author: <span property="dc:creator">Albert Einstein</span>
    <h2 property="dc:title">
      E = mc<sup>2</sup>: The Most Urgent Problem of Our Time
    </h2>
</head>
                

would generate the expected triple:

<> dc:title
   "E = mc<sup>2</sup>: The Most Urgent Problem of Our Time"^^rdf:XMLLiteral .
                

Note that the value of this [XML Literal] is the exclusive canonicalization of the RDF/A element's value.

5.1.1.2 Language Tags

RDF allows [plain literal]s to have a language tag, as illustrated by the following example from [RDFTESTS-RDFMS-XMLLANG-TEST006]:

<http://example.org/node> <http://example.org/property> "chat"@fr .
    

In RDF/A the XML language attribute -- xml:lang -- is used to add this information, whether the plain literal is designated by the content attribute, or by a datatype value of plaintext:

<meta about="http://example.org/node"
      property="ex:property" xml:lang="fr" content="chat" />
              

Note that the value can be inherited as defined in [XML-LANG], so the following syntax will give the same triple as above:

<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="fr">
  <head>
    <title xml:lang="en">Example</title>
    <meta about="http://example.org/node"
	  property="ex:property" content="chat" />
  </head>
  ...
</html>

5.1.2 With datatype

RDF allows [literal]s to be given a data type, as illustrated by the following example from [RDFTESTS-DATATYPES-TEST001]:

<http://example.org/foo>
  <http://example.org/bar>
  "10"^^<http://www.w3.org/2001/XMLSchema#integer> .
              

This can be represented in RDF/A as follows:

<span about="http://example.org/foo"
      property="ex:bar" content="10" datatype="xsd:integer">ten</span>
              
5.1.2.1 Literal from string value of meta

If the datatype is specified, but no content attribute exists, then the typed literal's value is determined as the concatenation of all textual child elements. For example, the following RDF/A:

<span about="http://example.org/foo"
      property="dc:creator" datatype="xsd:string">
  <b>M</b>ark <b>B</b>irbeck
</span>.
   

will yield the following triple:

<http://example.org/foo> dc:creator "Mark Birbeck"^^xsd:string .
   

5.2 Blank nodes

A [blank node] is generated explicitly when an [RDF/A statement] uses a bnode CURIE as its subject. A [blank node] can be generated more implicitly when an XML element without an about attribute has meta or link children elements, also without about attributes of their own. In the latter case, the [unique anonymous ID] generated to identify the [blank node] is associated with the [context statement] of the meta and link elements. This allows a number of statements to be made about the same [blank node].

For example, to establish relationships between a [blank node] and literals or URIs, one can use the implicit [blank node] construction of our earlier exapmle, repeated here:

<blockquote>
    <link rel="dc:source" href="urn:isbn:0140449132" />
    <meta property="dc:creator" content="Fyodor Dostoevsky" />
    <p>
        Rodion Romanovitch! My dear friend! If you go on in this way
        you will go mad, I am positive! Drink, pray, if only a few drops!
    </p>
</blockquote>
            

This would generate the following [triple]s:

_:a dc:source <urn:isbn:0140449132> .
_:a dc:creator "Fyodor Dostoevsky" .
            

One could also use the more explicit declaration:

<blockquote about="[_:a]">
    <p>
        Rodion Romanovitch! My dear friend! If you go on in this way
        you will go mad, I am positive! Drink, pray, if only a few drops!
    </p>
</blockquote>

<link about="[_:a]" 
      rel="dc:source" href="urn:isbn:0140449132" />
<meta about="[_:a]"
      property="dc:creator" content="Fyodor Dostoevsky" />
            

To establish relationships between [blank node]s, the [unique anonymous ID] must be set explicity using a CURIE bnode as subject or object. For example, if our desired output is the following [triple]s:

_:a foaf:mbox mailto:daniel.brickley@bristol.ac.uk .
_:b foaf:mbox mailto:libby.miller@bristol.ac.uk .
_:a foaf:knows _:b .
            

we could use the following XHTML:

<link about="[_:a]" rel="foaf:mbox"
      href="mailto:daniel.brickley@bristol.ac.uk" />
<link about="[_:b]" rel="foaf:mbox"
      href="mailto:libby.miller@bristol.ac.uk" />
<link about="[_:a]" rel="foaf:knows"
      href="[_:b]" />
            

or, alternatively, if we wish to partly render the information in XHTML:

<div about="[_:a]">
   DanBri can be reached via
   <a rel="foaf:mbox" 
      href="mailto:daniel.brickley@bristol.ac.uk">
     email
   </a>.
   He knows Libby.
   <link rel="foaf:knows" href="[_:b]" />
</div>

<div about="[_:b]">
   Libby can be reached via
   <a rel="foaf:mbox"
      href="mailto:libby.miller@bristol.ac.uk">
     email
   </a>
</div>
           

5.3 Reification

RDF/A partially supports reification.

During subject resolution (which could be triggered by object resolution for a rev attribute), the processor may traverse up the DOM tree in search of an about attribute. If a link or meta element is encountered before an about attribute is found, and if this link or meta element itself does not have an about attribute, then the subject (or, again in the case of rev, object) is resolved as the [RDF/A statement] represented by this link or meta element.

For example, the following XHTML:

<div about="">
  <link rel="cc:license"
	href="http://creativecommons.org/licenses/by-nc-nd/2.5/">
     <meta property="dc:creator" content="Ben Adida" />
  </link>
  <meta property="dc:creator" content="Mark Birbeck" />
</div>
            

will yield the following triples:

 <> cc:license <http://creativecommons.org/licenses/by-nc-nd/2.5/> .
 <> dc:creator "Mark Birbeck."  
 _:a rdf:type rdf:Statement .
 _:a rdf:subject <> .
 _:a rdf:predicate cc:license .
 _:a rdf:object <http://creativecommons.org/licenses/by-nc-nd/2.5/> .
 _:a dc:creator "Ben Adida" .
            

which means that "Mark Birbeck" is the creator of the current document, that this document is licensed under a Creative Commons license, and that "Ben Adida" is the creator of that licensing statement, not of the document itself.

6 Examples

6.1 Creative Commons

One of the advantages of using the same syntax to make general statements as well as statements about a document is that in many cases a document can carry its own metadata. For example, if an XHTML document contains a navigable link to the Creative Commons license, this link can also be used to express metadata:

<div about="">
    This document is licensed under a
    <a rel="cc:license" 
       href="http://creativecommons.org/licenses/by-sa/2.0/">
        Creative Commons License
    </a>
    which, among other things, requires that you provide 
    attribution to the author,
    <a rel="dc:creator" href="http://ben.adida.net">Ben Adida</a>.
</div>
            

This chunk of XHTML will generate the same triples, no matter what other XHTML contains it:

<> cc:license <http://creativecommons.org/licenses/by-sa/2.0/>
<> dc:creator <http://ben.adida.net>
            

6.2 FOAF

FOAF requires the definition of at least two RDF entities: the FOAF person, and the FOAF homepage, which cannot be the same. Thus, the following XHTML can be used to represent a FOAF record:

<html xmlns...>
    <head>
      <title property="dc:title">Dan's home page</title>
    </head>
    <body>
      <section id="person">
        <span about="[_:geolocation]">
          Dan is located at latitude
          <meta property="geo:lat">51.47026</meta>
          and longitude
          <meta property="geo:long">-2.59466</meta>
        </span>
        <link rel="rdf:type" href="[foaf:Person]" />
        <link rel="foaf:homepage" href="" />
        <link rel="foaf:based_near" href="[_:geolocation]" />
        <h1 property="foaf:name">Dan Brickley</h1>
      </section>
    </body>
</html>
            

which yields the correct FOAF triples:

<> dc:title "Dan's home page" .
_:geolocation geo:lat "51.47026" .
_:geolocation geo:long "-2.59466" .
<#person> rdf:type foaf:Person .
<#person> foaf:homepage <> .
<#person> foaf:based_near _:geolocation .
<#person> foaf:name "Dan Brickley" .
            

If one wants to make the foaf:Person a blank node, then the only change required is taking out the id="person" from the span element, which then yields the following triples:

<> dc:title "Dan's home page" .
_:geolocation geo:lat "51.47026" .
_:geolocation geo:long "-2.59466" .
_:span0 rdf:type foaf:Person .
_:span0 foaf:homepage <> .
_:span0 foaf:based_near _:geolocation .
_:span0 foaf:name "Dan Brickley" .
            

7 Rules

(not updated yet.)

8 Bibliography

DC
Dublin Core Metadata Initiative (DCMI) (See http://dublincore.org/.)
FOAF-PROJECT
The FOAF Project (See http://www.foaf-project.org.)
HTML
HTML 4.01 Specification (See http://www.w3.org/TR/html401/.)
N-TRIPLES
RDF Test Cases, N-Triples (See http://www.w3.org/TR/rdf-testcases/#ntriples.)
N3-PRIMER
N3 Primer (See http://www.w3.org/2000/10/swap/Primer.)
RDF-CONCEPTS
Resource Description Framework (RDF): Concepts and Abstract Syntax (See http://www.w3.org/TR/rdf-concepts/.)
RDF-SYNTAX
RDF/XML Syntax and Grammar (See http://www.w3.org/TR/rdf-syntax-grammar/.)
RDFTESTS-DATATYPES-TEST001
datatypes/test001.nt (See http://www.w3.org/2000/10/rdf-tests/rdfcore/datatypes/test001.nt.)
RDFTESTS-RDFMS-XMLLANG-TEST006
rdfms-xmllang/test006.nt (See http://www.w3.org/2000/10/rdf-tests/rdfcore/rdfms-xmllang/test006.nt.)
RELAXNG
RELAX NG Home Page (See http://www.relaxng.org/.)
XHTML
XHTML 1.0 (See http://www.w3.org/TR/xhtml1.)
XHTML-2.0-LINKTYPES
XHTML 2.0 Link Types (See http://www.w3.org/MarkUp/Group/2003/WD-xhtml2-20031029/abstraction.html#dt_LinkTypes.)
XML-BASE
XML Base (See http://www.w3.org/TR/xmlbase/.)
XML-LANG
Extensible Markup Language (XML) 1.0 (Third Edition), Language Identification (See http://www.w3.org/TR/REC-xml/#sec-lang-tag.)
XPOINTER-FRAMEWORK
XPointer Framework (See http://www.w3.org/TR/xptr-framework/.)
RDFHTML
RDF-in-HTML Task Force (See http://w3.org/2001/sw/BestPractices/HTML/.)
SWBPD-WG
Semantic Web Best Practices and Deployment Working Group (See http://w3.org/2001/sw/BestPractices/.)
HTML-WG
HTML Working Group (See http://w3.org/MarkUp/Group/.)
CURIE
CURIEs (See http://w3.org/2001/sw/BestPractices/HTML/2005-10-27-CURIE.)

9 Change History

2006-01-16: made the use of CURIE type for rel,rev,property consistent across document (particularly section 2.4 was erroneous). [BenAdida]