Techniques for WCAG 2.0

Skip to Content (Press Enter)

-

G145: Ensuring that a contrast ratio of at least 3:1 exists between text (and images of text) and background behind the text

Applicability

Any technology that produces visual output.

This technique relates to:

Description

The objective of this technique is to make sure that users can read text that is presented over a background. This technique relaxes the 4.5:1 contrast ratio requirement for text that is at least 18 point (if not bold) or at least 14 point (if bold).

If the background is a solid color (or all black or all white) then the contrast ratio of the larger-scale text can be maintained by making sure that each of the text letters have a 3:1 contrast ratio with the background.

If the background or the letters vary in relative luminance (or are patterned), then the background around the letters can be chosen or shaded so that the letters maintain a 3:1contrast ratio with the background behind them even if they do not have that contrast ratio with the entire background.

The contrast ratio can sometimes be maintained by changing the relative luminance of the letters as the relative luminance of the background changes across the page.

Another method is to provide a halo around the text that provides the necessary contrast ratio if the background image or color would not normally be sufficiently different in relative luminance.

Examples

Resources

Resources are for information purposes only, no endorsement implied.

(none currently listed)

Tests

Procedure

  1. Measure the relative luminance of each letter (unless they are all uniform) using the formula:

    • L = 0.2126 * R + 0.7152 * G + 0.0722 * B where R, G and B are defined as:

      • if R sRGB <= 0.03928 then R = R sRGB /12.92 else R = ((R sRGB +0.055)/1.055) ^ 2.4

      • if G sRGB <= 0.03928 then G = G sRGB /12.92 else G = ((G sRGB +0.055)/1.055) ^ 2.4

      • if B sRGB <= 0.03928 then B = B sRGB /12.92 else B = ((B sRGB +0.055)/1.055) ^ 2.4

      and R sRGB, G sRGB, and B sRGB are defined as:

      • R sRGB = R 8bit /255

      • G sRGB = G 8bit /255

      • B sRGB = B 8bit /255

      The "^" character is the exponentiation operator.

    Note: For aliased letters, use the relative luminance value found two pixels in from the edge of the letter.

  2. Measure the relative luminance of the background pixels immediately next to the letter using same formula.

  3. Calculate the contrast ratio using the following formula.

    • (L1 + 0.05) / (L2 + 0.05), where

  4. Check that the contrast ratio is equal to or greater than 3:1

Expected Results

If this is a sufficient technique for a success criterion, failing this test procedure does not necessarily mean that the success criterion has not been satisfied in some other way, only that this technique has not been successfully implemented and can not be used to claim conformance.