The presentation of this document has been augmented to identify changes from a previous version. Three kinds of changes are highlighted: new, added text, changed text, and deleted text.


W3C

XQueryX 3.0

W3C Working Draft 14 December 2010

This version:
http://www.w3.org/TR/2010/WD-xqueryx-30-20101214/
Latest version:
http://www.w3.org/TR/xqueryx-30/
Editor:
Jim Melton, Oracle <jim.melton@oracle.com>

See also translations.

This document is also available in these non-normative formats: XML and Change markings relative to previous Working Draft.


Abstract

This document defines an XML Syntax for [XQuery 3.0: An XML Query Language] .

Status of this Document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

This is one document in a set of seven documents that are being progressed to Recommendation together (XQuery 3.0, XQueryX 3.0, XSLT 3.0, Data Model 3.0, Functions and Operators 3.0, Serialization 3.0, XPath 3.0).

This is a Working Draft as described in the Process Document. It has been developed by the W3C XML Query Working Group, which is part of the XML Activity. The Working Group expects to advance this specification to Recommendation Status.

This public Working Draft differs from the previous Working Draft in two important ways. First, the version number of the document has changed from "1.1" to "3.0"; this was done in order to align the version numbers of the entire suite of documents of which this WD is a part. Second, a number of substantive technical changes (as well as many editorial changes) have been made in this WD. Please note that this Working Draft of XQueryX 3.0 represents the second version of a previous W3C Recommendation.

No implementation report currently exists. However, a Test Suite for XQueryX 3.0 is under development.

This document incorporates changes made against the previous publication of the Working Draft of 14 December 2010. Changes to this document since the previous publication of the Working Draft are detailed in D Change log.

Please report errors in this document using W3C's public Bugzilla system (instructions can be found at http://www.w3.org/XML/2005/04/qt-bugzilla). If access to that system is not feasible, you may send your comments to the W3C XSLT/XPath/XQuery public comments mailing list, public-qt-comments@w3.org. It will be very helpful if you include the string “[XQueryX30]” in the subject line of your report, whether made in Bugzilla or in email. Please use multiple Bugzilla entries (or, if necessary, multiple email messages) if you have more than one comment to make. Archives of the comments and responses are available at http://lists.w3.org/Archives/Public/public-qt-comments/.

Publication as a Working Draft does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

This document was produced by a group operating under the 5 February 2004 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.

Table of Contents

1 Introduction
2 Mapping the XQuery Syntax
3 Examples from the XML Query Use Cases in XML Syntax
    3.1 Example 1
        3.1.1 XQuery solution in XQuery Use Cases:
        3.1.2 A Solution in XQueryX:
        3.1.3 Transformation of XQueryX Solution into XQuery
        3.1.4 Corresponding Grammar Abstract Parse Tree
    3.2 Example 2
        3.2.1 XQuery solution in XQuery Use Cases:
        3.2.2 A solution in XQueryX:
        3.2.3 Transformation of XQueryX Solution into XQuery
    3.3 Example 3
        3.3.1 XQuery solution in XQuery Use Cases:
        3.3.2 A solution in XQueryX:
        3.3.3 Transformation of XQueryX Solution into XQuery
    3.4 Example 4
        3.4.1 XQuery solution in XQuery Use Cases:
        3.4.2 A solution in XQueryX:
        3.4.3 Transformation of XQueryX Solution into XQuery
4 An XML Schema for the XQuery XML Syntax
5 Conformance

Appendices

A References
B Transforming XQueryX to XQuery
C The application/xquery+xml Media Type
    C.1 Introduction
    C.2 Registration of MIME Media Type application/xquery+xml
        C.2.1 Encoding Considerations
        C.2.2 Security Considerations
        C.2.3 Interoperability Considerations
        C.2.4 Published specification
        C.2.5 Applications That Use This Media Type
        C.2.6 Additional Information
            C.2.6.1 Recognizing XQuery Files ("Magic Numbers")
            C.2.6.2 File Extensions
            C.2.6.3 Macintosh File Type Code(s)
        C.2.7 Person and Email Address to Contact For Further Information
        C.2.8 Intended Usage
        C.2.9 Restrictions on usage
        C.2.10 Author/Change Controller
        C.2.11 Fragment Identifiers
D Change log (Non-Normative)
    D.1 Substantive changes
    D.2 Incompatibilities
    D.3 Editorial changes


1 Introduction

The [XQuery 3.0 Requirements] states that "The XML Query Language MAY have more than one syntax binding. One query language syntax MUST be convenient for humans to read and write. One query language syntax MUST be expressed in XML in a way that reflects the underlying structure of the query."

XQueryX is an XML representation of an XQuery. It was created by mapping the productions of the XQuery grammar into XML productions. The result is not particularly convenient for humans to read and write, but it is easy for programs to parse, and because XQueryX is represented in XML, standard XML tools can be used to create, interpret, or modify queries.

In this document, examples and material labeled as "Note" are provided for explanatory purposes and are not normative.

Note:

Because the two syntaxes are merely different grammars that express the same query semantics, they share all aspects of an XQuery processing system except for the component that recognizes and translates the source representation of a query (that is, the parser). The aspects that are shared include both the static context and the dynamic context that are defined in [XQuery 3.0: An XML Query Language] .

There are several environments in which XQueryX may be useful:

This version of XQueryX is fully compatible with [XML Syntax for XQuery 3.0 (XQueryX)]. It differs from that earlier version of the language by the addition of new XML Schema definitions and XSLT stylesheet templates. All queries expressed in the syntax defined by [XML Syntax for XQuery 3.0 (XQueryX)] continue to be valid, with the same meaning, when processed by an implementation of this version of XQueryX.

The most recent versions of the XQueryX XML Schema and the XQueryX XSLT stylesheet are available at http://www.w3.org/2010/12/XQueryX/xqueryx.xsd and http://www.w3.org/2010/12/XQueryX/xqueryx.xsl, respectively.

Note:

The locations at which the current versions of the XML Schema and XSLT stylesheet are located during development of this specification will vary with each Working Draft and Candidate Recommendation of the spec that is published. The namespace target URI is identical to that used for XQueryX 1.0.

2 Mapping the XQuery Syntax

XQueryX is an XML representation of the abstract syntax found in Appendix A of [XQuery 3.0: An XML Query Language] . The XQueryX syntax is defined by the XQueryX Schema, which is specified in 4 An XML Schema for the XQuery XML Syntax. The XQueryX semantics are defined by a stylesheet that maps an instance of XQueryX to an instance of XQuery; see B Transforming XQueryX to XQuery.

The main data structure in the XQueryX Schema is the set of types that describe expressions. We have chosen to model expressions using substitution groups, with an "expr" abstract base class and a number of intermediate abstract classes.

Consider the following productions from the abstract syntax:

FLWORExpr          ::= InitialClause IntermediateClause* ReturnClause
InitialClause      ::= ForClause | LetClause | WindowClause
IntermediateClause ::= InitialClause | WhereClause | GroupByClause | OrderByClause | CountClause
ForClause          ::= "outer"? "for" "$" VarName TypeDeclaration? PositionalVar? "in" ExprSingle
                         ("," "$" VarName TypeDeclaration? PositionalVar? "in" ExprSingle)*
PositionalVar      ::= "at" "$" VarName
LetClause          ::= "let" "$" VarName TypeDeclaration? ":=" ExprSingle
                         ("," "$" VarName TypeDeclaration? ":=" ExprSingle)*
WhereClause        ::= "where" ExprSingle

Note:

Those productions do not represent the entire FLWOR expression, so some of the BNF non-terminal names are not resolved in the example abstract syntax.

The following XQueryX Schema definitions reflect the structure of those productions from that abstract syntax:

  
<!-- The base class -->
  <xsd:complexType name="expr"/>
  <xsd:element name="expr" type="expr" abstract="true"/>
  
  <!-- Simple wrapper class -->
  <xsd:complexType name="exprWrapper">
    <xsd:sequence>
      <xsd:element ref="expr"/>
    </xsd:sequence>
  </xsd:complexType>
  
  <xsd:complexType name="flworExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:choice>
            <xsd:element ref="forClause"/>
            <xsd:element ref="letClause"/>
            <xsd:element ref="windowClause"/>
          </xsd:choice>
          <xsd:sequence>
            <xsd:choice minOccurs="0" maxOccurs="unbounded">
              <xsd:element ref="forClause"/>
              <xsd:element ref="letClause"/>
              <xsd:element ref="windowClause"/>
              <xsd:element ref="countClause"/>
              <xsd:element ref="whereClause"/>
              <xsd:element ref="groupByClause"/>
              <xsd:element ref="orderByClause"/>
            </xsd:choice>
          <xsd:element ref="returnClause"/>
        </xsd:sequence>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="flworExpr" type="flworExpr" substitutionGroup="expr"/>

  <xsd:complexType name="forClause">
    <xsd:sequence>
      <xsd:element ref="forClauseItem" minOccurs="1" maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="outer" type="xsd:boolean" default="false"/>
  </xsd:complexType>

  <xsd:element name="forClause" type="forClause"/>

  <xsd:complexType name="forClauseItem">
    <xsd:sequence>
  	  <xsd:element ref="typedVariableBinding"/>
	    <xsd:element ref="positionalVariableBinding" minOccurs="0" maxOccurs="1"/>
      <xsd:element ref="forLetClauseItemExtensions" minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="forExpr" type="exprWrapper"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="forClauseItem" type="forClauseItem"/>

  <xsd:element name="forLetClauseItemExtensions" abstract="true"/>

  <xsd:complexType name="letClause">
    <xsd:sequence>
      <xsd:element ref="letClauseItem" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="letClause" type="letClause"/>

  <xsd:complexType name="letClauseItem">
    <xsd:sequence>
      <xsd:choice>
        <xsd:sequence>
          <xsd:element ref="typedVariableBinding"/>
          <xsd:element ref="forLetClauseItemExtensions"
                       minOccurs="0" maxOccurs="unbounded"/>
        </xsd:sequence>
        <xsd:element ref="forLetClauseItemExtensions"
                     minOccurs="0" maxOccurs="unbounded"/>
      </xsd:choice>
      <xsd:element name="letExpr" type="exprWrapper"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="letClauseItem" type="letClauseItem"/>

  <xsd:element name="whereClause" type="exprWrapper"/>

Since XQuery uses the expression production liberally to allow expressions to be flexibly combined, XQueryX uses the exprWrapper type in embedded contexts to allow all expression types to occur.

3 Examples from the XML Query Use Cases in XML Syntax

Three of following examples are based on the data and queries in the XMP (Experiences and Exemplars) use case in [XQuery 3.0 Use Cases] , while a fourth example is based on the data and queries in the NS (Queries Using Namespaces) use case. For each example, we show the English description of the query, the XQuery solution given in [XQuery 3.0 Use Cases] , an XQueryX solution, and the XQuery that results from applying the XQueryX-to-XQuery transformation defined by the stylesheet in B Transforming XQueryX to XQuery to the XQueryX solution. That produced XQuery is presented only as a sanity-check — the intent of the stylesheet is not to create the identical XQuery expression given in [XQuery 3.0 Use Cases] , but to produce a valid XQuery expression with the same semantics. The semantics of the XQueryX solution are determined by the semantics of the XQuery expression that results from that transformation. The "correctness" of that transformation is determined by asking the following the question: Can some XQueryX processor QX process some XQueryX document D1 to produce results R1, after which the stylesheet is used to translate D1 into an XQuery expression E1 that, when processed by some XQuery processor Q, produces results R2 that are equivalent (under some meaningful definition of "equivalent") to results R1?

Comparison of the results of the XQueryX-to-XQuery transformation given in this document with the XQuery solutions in the [XQuery 3.0 Use Cases] may be helpful in evaluating the correctness of the XQueryX solution in each example.

The XQuery Use Cases solution given for each example is provided only to assist readers of this document in understanding the XQueryX solution. There is no intent to imply that this document specifies a "compilation" or "transformation" of XQuery syntax into XQueryX syntax.

In the following examples, note that path expressions are expanded to show their structure. Also, note that the prefix syntax for binary operators like "and" makes the precedence explicit. In general, humans find it easier to read an XML representation that does not expand path expressions, but it is less convenient for programmatic representation and manipulation. XQueryX is designed as a language that is convenient for production and modification by software, and not as a convenient syntax for humans to read and write.

Finally, please note that white space, including new lines, have been added to some of the XQueryX documents and XQuery expressions for readability. That additional white space is not produced by the XQueryX-to-XQuery transformation.

3.1 Example 1

Here is Q1 from the [XQuery 3.0 Use Cases] , use case XMP (Experiences and Exemplars): "List books published by Addison-Wesley after 1991, including their year and title."

3.1.2 A Solution in XQueryX:

<?xml version="1.0"?>
<xqx:module xmlns:xqx="http://www.w3.org/2005/XQueryX"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xsi:schemaLocation="http://www.w3.org/2005/XQueryX
                                http://www.w3.org/2005/XQueryX/xqueryx.xsd">
  <xqx:mainModule>
    <xqx:queryBody>
      <xqx:elementConstructor>
        <xqx:tagName>bib</xqx:tagName>
        <xqx:elementContent>
          <xqx:flworExpr>
            <xqx:forClause>
              <xqx:forClauseItem>
                <xqx:typedVariableBinding>
                  <xqx:varName>b</xqx:varName>
                </xqx:typedVariableBinding>
                <xqx:forExpr>
                  <xqx:pathExpr>
                    <xqx:stepExpr>
                      <xqx:filterExpr>
                        <xqx:functionCallExpr>
                          <xqx:functionName>doc</xqx:functionName>
                          <xqx:arguments>
                            <xqx:stringConstantExpr>
                              <xqx:value>http://bstore1.example.com/bib.xml</xqx:value>
                            </xqx:stringConstantExpr>
                          </xqx:arguments>
                        </xqx:functionCallExpr>
                      </xqx:filterExpr>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:xpathAxis>child</xqx:xpathAxis>
                      <xqx:nameTest>bib</xqx:nameTest>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:xpathAxis>child</xqx:xpathAxis>
                      <xqx:nameTest>book</xqx:nameTest>
                    </xqx:stepExpr>
                  </xqx:pathExpr>
                </xqx:forExpr>
              </xqx:forClauseItem>
            </xqx:forClause>
            <xqx:whereClause>
              <xqx:andOp>
                <xqx:firstOperand>
                  <xqx:equalOp>
                    <xqx:firstOperand>
                      <xqx:pathExpr>
                        <xqx:stepExpr>
                          <xqx:filterExpr>
                            <xqx:varRef>
                              <xqx:name>b</xqx:name>
                            </xqx:varRef>
                          </xqx:filterExpr>
                        </xqx:stepExpr>
                        <xqx:stepExpr>
                          <xqx:xpathAxis>child</xqx:xpathAxis>
                          <xqx:nameTest>publisher</xqx:nameTest>
                        </xqx:stepExpr>
                      </xqx:pathExpr>
                    </xqx:firstOperand>
                    <xqx:secondOperand>
                      <xqx:stringConstantExpr>
                        <xqx:value>Addison-Wesley</xqx:value>
                      </xqx:stringConstantExpr>
                    </xqx:secondOperand>
                  </xqx:equalOp>
                </xqx:firstOperand>
                <xqx:secondOperand>
                  <xqx:greaterThanOp>
                    <xqx:firstOperand>
                      <xqx:pathExpr>
                        <xqx:stepExpr>
                          <xqx:filterExpr>
                            <xqx:varRef>
                              <xqx:name>b</xqx:name>
                            </xqx:varRef>
                          </xqx:filterExpr>
                        </xqx:stepExpr>
                        <xqx:stepExpr>
                          <xqx:xpathAxis>attribute</xqx:xpathAxis>
                          <xqx:nameTest>year</xqx:nameTest>
                        </xqx:stepExpr>
                      </xqx:pathExpr>
                    </xqx:firstOperand>
                    <xqx:secondOperand>
                      <xqx:integerConstantExpr>
                        <xqx:value>1991</xqx:value>
                      </xqx:integerConstantExpr>
                    </xqx:secondOperand>
                  </xqx:greaterThanOp>
                </xqx:secondOperand>
              </xqx:andOp>
            </xqx:whereClause>
            <xqx:returnClause>
              <xqx:elementConstructor>
                <xqx:tagName>book</xqx:tagName>
                <xqx:attributeList>
                  <xqx:attributeConstructor>
                    <xqx:attributeName>year</xqx:attributeName>
                    <xqx:attributeValueExpr>
                      <xqx:pathExpr>
                        <xqx:stepExpr>
                          <xqx:filterExpr>
                            <xqx:varRef>
                              <xqx:name>b</xqx:name>
                            </xqx:varRef>
                          </xqx:filterExpr>
                        </xqx:stepExpr>
                        <xqx:stepExpr>
                          <xqx:xpathAxis>attribute</xqx:xpathAxis>
                          <xqx:nameTest>year</xqx:nameTest>
                        </xqx:stepExpr>
                      </xqx:pathExpr>
                    </xqx:attributeValueExpr>
                  </xqx:attributeConstructor>
                </xqx:attributeList>
                <xqx:elementContent>
                  <xqx:pathExpr>
                    <xqx:stepExpr>
                      <xqx:filterExpr>
                        <xqx:varRef>
                          <xqx:name>b</xqx:name>
                        </xqx:varRef>
                      </xqx:filterExpr>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:xpathAxis>child</xqx:xpathAxis>
                      <xqx:nameTest>title</xqx:nameTest>
                    </xqx:stepExpr>
                  </xqx:pathExpr>
                </xqx:elementContent>
              </xqx:elementConstructor>
            </xqx:returnClause>
          </xqx:flworExpr>
        </xqx:elementContent>
      </xqx:elementConstructor>
    </xqx:queryBody>
  </xqx:mainModule>
</xqx:module>

3.1.3 Transformation of XQueryX Solution into XQuery

Application of the stylesheet in B Transforming XQueryX to XQuery to the XQueryX solution results in:

  
<bib>{
 for $b in doc("http://bstore1.example.com/bib.xml")/child::bib/child::book
 where (($b/child::publisher = "Addison-Wesley") and ($b/attribute::year > 1991))
 return <book year="{$b/attribute::year}">{$b/child::title}</book>
}</bib>

3.1.4 Corresponding Grammar Abstract Parse Tree

For comparison, here is the abstract parse tree corresponding to the XQuery for Example 1, as produced by the XQuery grammar applets found at http://www.w3.org/2007/01/applets/.

XPath2
  QueryList
    Module
      MainModule
        Prolog
        QueryBody
          Expr
            PathExpr
              Constructor
                DirectConstructor
                  DirElemConstructor >
                    LessThanOpOrTagO <
                    TagQName bib
                    DirAttributeList
                    StartTagClose >
                    DirElemContent
                      ElementContentChar 
                    DirElemContent
                      ElementContentChar  
                    DirElemContent
                      CommonContent
                        EnclosedExpr
                          Lbrace {
                          Expr
                            FLWORExpr
                              ForClause
                                VarName
                                  QName b
                                PathExpr
                                  FunctionCall
                                    FunctionQName doc
                                    PathExpr
                                      StringLiteral "http://bstore1.example.com/bib.xml"
                                  StepExpr
                                    AbbrevForwardStep
                                      NodeTest
                                        NameTest
                                          QName bib
                                  StepExpr
                                    AbbrevForwardStep
                                      NodeTest
                                        NameTest
                                          QName book
                              WhereClause
                                AndExpr and
                                  ComparisonExpr =
                                    PathExpr
                                      VarName
                                        QName b
                                      StepExpr
                                        AbbrevForwardStep
                                          NodeTest
                                            NameTest
                                              QName publisher
                                    PathExpr
                                      StringLiteral "Addison-Wesley"
                                  ComparisonExpr >
                                    PathExpr
                                      VarName
                                        QName b
                                      StepExpr
                                        AbbrevForwardStep @
                                          NodeTest
                                            NameTest
                                              QName year
                                    PathExpr
                                      IntegerLiteral 1991
                              PathExpr
                                Constructor
                                  DirectConstructor
                                    DirElemConstructor >
                                      LessThanOpOrTagO <
                                      TagQName book
                                      DirAttributeList
                                        S  
                                        TagQName year
                                        ValueIndicator =
                                        DirAttributeValue
                                          OpenQuot "
                                          QuotAttrValueContent
                                            CommonContent
                                              EnclosedExpr
                                                Lbrace {
                                                Expr
                                                  PathExpr
                                                    VarName
                                                      QName b
                                                    StepExpr
                                                      AbbrevForwardStep @
                                                        NodeTest
                                                          NameTest
                                                            QName year
                                                Rbrace }
                                          CloseQuot "
                                      StartTagClose >
                                      DirElemContent
                                        ElementContentChar 
                                      DirElemContent
                                        ElementContentChar  
                                      DirElemContent
                                        ElementContentChar  
                                      DirElemContent
                                        ElementContentChar  
                                      DirElemContent
                                        ElementContentChar  
                                      DirElemContent
                                        ElementContentChar  
                                      DirElemContent
                                        CommonContent
                                          EnclosedExpr
                                            Lbrace {
                                            Expr
                                              PathExpr
                                                VarName
                                                  QName b
                                                StepExpr
                                                  AbbrevForwardStep
                                                    NodeTest
                                                      NameTest
                                                        QName title
                                            Rbrace }
                                      DirElemContent
                                        ElementContentChar 
                                      DirElemContent
                                        ElementContentChar  
                                      DirElemContent
                                        ElementContentChar  
                                      DirElemContent
                                        ElementContentChar  
                                      DirElemContent </
                                        ElementContentChar  
                          Rbrace }
                    DirElemContent </
                      ElementContentChar 

3.2 Example 2

Here is Q4 from the [XQuery 3.0 Use Cases] , use case XMP (Experiences and Exemplars): "For each author in the bibliography, list the author's name and the titles of all books by that author, grouped inside a "result" element."

3.2.2 A solution in XQueryX:

<?xml version="1.0"?>
<xqx:module xmlns:xqx="http://www.w3.org/2005/XQueryX"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xsi:schemaLocation="http://www.w3.org/2005/XQueryX
                          http://www.w3.org/2005/XQueryX/xqueryx.xsd">
  <xqx:mainModule>
    <xqx:queryBody>
      <xqx:elementConstructor>
        <xqx:tagName>results</xqx:tagName>
        <xqx:elementContent>
          <xqx:flworExpr>
            <xqx:letClause>
              <xqx:letClauseItem>
                <xqx:typedVariableBinding>
                  <xqx:varName>a</xqx:varName>
                </xqx:typedVariableBinding>
                <xqx:letExpr>
                 <xqx:pathExpr>
                   <xqx:stepExpr>
                     <xqx:filterExpr>
                       <xqx:functionCallExpr>
                         <xqx:functionName>doc</xqx:functionName>
                         <xqx:arguments>
                           <xqx:stringConstantExpr>
                             <xqx:value>http://bstore1.example.com/bib.xml</xqx:value>
                           </xqx:stringConstantExpr>
                         </xqx:arguments>
                       </xqx:functionCallExpr>
                     </xqx:filterExpr>
                   </xqx:stepExpr>
                   <xqx:stepExpr>
                     <xqx:xpathAxis>descendant-or-self</xqx:xpathAxis>
                     <xqx:anyKindTest/>
                   </xqx:stepExpr>
                   <xqx:stepExpr>
                     <xqx:xpathAxis>child</xqx:xpathAxis>
                     <xqx:nameTest>author</xqx:nameTest>
                   </xqx:stepExpr>
                 </xqx:pathExpr>
                </xqx:letExpr>
              </xqx:letClauseItem>
            </xqx:letClause>
            <xqx:forClause>
              <xqx:forClauseItem>
                <xqx:typedVariableBinding>
                  <xqx:varName>last</xqx:varName>
                </xqx:typedVariableBinding>
                <xqx:forExpr>
                  <xqx:functionCallExpr>
                    <xqx:functionName>distinct-values</xqx:functionName>
                    <xqx:arguments>
                      <xqx:pathExpr>
                        <xqx:stepExpr>
                          <xqx:filterExpr>
                            <xqx:varRef>
                              <xqx:name>a</xqx:name>
                            </xqx:varRef>
                          </xqx:filterExpr>
                        </xqx:stepExpr>
                        <xqx:stepExpr>
                          <xqx:xpathAxis>child</xqx:xpathAxis>
                          <xqx:nameTest>last</xqx:nameTest>
                        </xqx:stepExpr>
                      </xqx:pathExpr>
                    </xqx:arguments>
                  </xqx:functionCallExpr>
                </xqx:forExpr>
              </xqx:forClauseItem>
              <xqx:forClauseItem>
                <xqx:typedVariableBinding>
                  <xqx:varName>first</xqx:varName>
                </xqx:typedVariableBinding>
                <xqx:forExpr>
                  <xqx:functionCallExpr>
                    <xqx:functionName>distinct-values</xqx:functionName>
                    <xqx:arguments>
                      <xqx:pathExpr>
                        <xqx:stepExpr>
                          <xqx:filterExpr>
                            <xqx:varRef>
                              <xqx:name>a</xqx:name>
                            </xqx:varRef>
                          </xqx:filterExpr>
                          <xqx:predicates>
                            <xqx:equalOp>
                              <xqx:firstOperand>
                                <xqx:pathExpr>
                                  <xqx:stepExpr>
                                    <xqx:filterExpr>
                                      <xqx:contextItemExpr/>
                                    </xqx:filterExpr>
                                  </xqx:stepExpr>
                                  <xqx:stepExpr>
                                    <xqx:xpathAxis>child</xqx:xpathAxis>
                                    <xqx:nameTest>last</xqx:nameTest>
                                  </xqx:stepExpr>
                                </xqx:pathExpr>
                              </xqx:firstOperand>
                              <xqx:secondOperand>
                                <xqx:varRef>
                                  <xqx:name>last</xqx:name>
                                </xqx:varRef>
                              </xqx:secondOperand>
                            </xqx:equalOp>
                          </xqx:predicates>
                        </xqx:stepExpr>
                        <xqx:stepExpr>
                          <xqx:xpathAxis>child</xqx:xpathAxis>
                          <xqx:nameTest>first</xqx:nameTest>
                        </xqx:stepExpr>
                      </xqx:pathExpr>
                    </xqx:arguments>
                  </xqx:functionCallExpr>
                </xqx:forExpr>
              </xqx:forClauseItem>
            </xqx:forClause>
            <xqx:orderByClause>
              <xqx:orderBySpec>
                <xqx:orderByExpr>
                  <xqx:varRef>
                    <xqx:name>last</xqx:name>
                  </xqx:varRef>
                </xqx:orderByExpr>
              </xqx:orderBySpec>
              <xqx:orderBySpec>
                <xqx:orderByExpr>
                  <xqx:varRef>
                    <xqx:name>first</xqx:name>
                  </xqx:varRef>
                </xqx:orderByExpr>
              </xqx:orderBySpec>
            </xqx:orderByClause>
            <xqx:returnClause>
              <xqx:elementConstructor>
                <xqx:tagName>result</xqx:tagName>
                <xqx:elementContent>
                  <xqx:elementConstructor>
                    <xqx:tagName>author</xqx:tagName>
                    <xqx:elementContent>
                      <xqx:elementConstructor>
                        <xqx:tagName>last</xqx:tagName>
                        <xqx:elementContent>
                          <xqx:varRef>
                            <xqx:name>last</xqx:name>
                          </xqx:varRef>
                        </xqx:elementContent>
                      </xqx:elementConstructor>
                      <xqx:elementConstructor>
                        <xqx:tagName>first</xqx:tagName>
                        <xqx:elementContent>
                          <xqx:varRef>
                            <xqx:name>first</xqx:name>
                          </xqx:varRef>
                        </xqx:elementContent>
                      </xqx:elementConstructor>
                    </xqx:elementContent>
                  </xqx:elementConstructor>
                    <xqx:flworExpr>
                      <xqx:forClause>
                        <xqx:forClauseItem>
                          <xqx:typedVariableBinding>
                            <xqx:varName>b</xqx:varName>
                          </xqx:typedVariableBinding>
                          <xqx:forExpr>
                            <xqx:pathExpr>
                              <xqx:stepExpr>
                                <xqx:filterExpr>
                                  <xqx:functionCallExpr>
                                    <xqx:functionName>doc</xqx:functionName>
                                    <xqx:arguments>
                                      <xqx:stringConstantExpr>
                                        <xqx:value>http://bstore1.example.com/bib.xml</xqx:value>
                                      </xqx:stringConstantExpr>
                                    </xqx:arguments>
                                  </xqx:functionCallExpr>
                                </xqx:filterExpr>
                              </xqx:stepExpr>
                              <xqx:stepExpr>
                                <xqx:xpathAxis>child</xqx:xpathAxis>
                                <xqx:nameTest>bib</xqx:nameTest>
                              </xqx:stepExpr>
                              <xqx:stepExpr>
                                <xqx:xpathAxis>child</xqx:xpathAxis>
                                <xqx:nameTest>book</xqx:nameTest>
                              </xqx:stepExpr>
                            </xqx:pathExpr>
                          </xqx:forExpr>
                        </xqx:forClauseItem>
                      </xqx:forClause>
                      <xqx:whereClause>
                        <xqx:quantifiedExpr>
                          <xqx:quantifier>some</xqx:quantifier>
                          <xqx:quantifiedExprInClause>
                            <xqx:typedVariableBinding>
                              <xqx:varName>ba</xqx:varName>
                            </xqx:typedVariableBinding>
                            <xqx:sourceExpr>
                              <xqx:pathExpr>
                                <xqx:stepExpr>
                                  <xqx:filterExpr>
                                    <xqx:varRef>
                                      <xqx:name>b</xqx:name>
                                    </xqx:varRef>
                                  </xqx:filterExpr>
                                </xqx:stepExpr>
                                <xqx:stepExpr>
                                  <xqx:xpathAxis>child</xqx:xpathAxis>
                                  <xqx:nameTest>author</xqx:nameTest>
                                </xqx:stepExpr>
                              </xqx:pathExpr>
                            </xqx:sourceExpr>
                          </xqx:quantifiedExprInClause>
                          <xqx:predicateExpr>
                            <xqx:andOp>
                              <xqx:firstOperand>
                                <xqx:equalOp>
                                  <xqx:firstOperand>
                                    <xqx:pathExpr>
                                      <xqx:stepExpr>
                                        <xqx:filterExpr>
                                          <xqx:varRef>
                                            <xqx:name>ba</xqx:name>
                                          </xqx:varRef>
                                        </xqx:filterExpr>
                                      </xqx:stepExpr>
                                      <xqx:stepExpr>
                                        <xqx:xpathAxis>child</xqx:xpathAxis>
                                        <xqx:nameTest>last</xqx:nameTest>
                                      </xqx:stepExpr>
                                    </xqx:pathExpr>
                                  </xqx:firstOperand>
                                  <xqx:secondOperand>
                                    <xqx:varRef>
                                      <xqx:name>last</xqx:name>
                                    </xqx:varRef>
                                  </xqx:secondOperand>
                                </xqx:equalOp>
                              </xqx:firstOperand>
                              <xqx:secondOperand>
                                <xqx:equalOp>
                                  <xqx:firstOperand>
                                    <xqx:pathExpr>
                                      <xqx:stepExpr>
                                        <xqx:filterExpr>
                                          <xqx:varRef>
                                            <xqx:name>ba</xqx:name>
                                          </xqx:varRef>
                                        </xqx:filterExpr>
                                      </xqx:stepExpr>
                                      <xqx:stepExpr>
                                        <xqx:xpathAxis>child</xqx:xpathAxis>
                                        <xqx:nameTest>first</xqx:nameTest>
                                      </xqx:stepExpr>
                                    </xqx:pathExpr>
                                  </xqx:firstOperand>
                                  <xqx:secondOperand>
                                    <xqx:varRef>
                                      <xqx:name>first</xqx:name>
                                    </xqx:varRef>
                                  </xqx:secondOperand>
                                </xqx:equalOp>
                              </xqx:secondOperand>
                            </xqx:andOp>
                          </xqx:predicateExpr>
                        </xqx:quantifiedExpr>
                      </xqx:whereClause>
                      <xqx:returnClause>
                        <xqx:pathExpr>
                          <xqx:stepExpr>
                            <xqx:filterExpr>
                              <xqx:varRef>
                                <xqx:name>b</xqx:name>
                              </xqx:varRef>
                            </xqx:filterExpr>
                          </xqx:stepExpr>
                          <xqx:stepExpr>
                            <xqx:xpathAxis>child</xqx:xpathAxis>
                            <xqx:nameTest>title</xqx:nameTest>
                          </xqx:stepExpr>
                        </xqx:pathExpr>
                      </xqx:returnClause>
                    </xqx:flworExpr>
                </xqx:elementContent>
              </xqx:elementConstructor>
            </xqx:returnClause>
          </xqx:flworExpr>
        </xqx:elementContent>
      </xqx:elementConstructor>
    </xqx:queryBody>
  </xqx:mainModule>
</xqx:module>

3.2.3 Transformation of XQueryX Solution into XQuery

Application of the stylesheet in B Transforming XQueryX to XQuery to the XQueryX solution results in:

  
<results>{
 let $a:=doc("http://bstore1.example.com/bib.xml")/descendant-or-self::node()/child::author
 for $last in distinct-values($a/child::last), $first in distinct-values($a[(./child::last = $last)]/child::first)
 order by $last , $first 
 return <result><author><last>{$last}</last><first>{$first}</first></author>{
 for $b in doc("http://bstore1.example.com/bib.xml")/child::bib/child::book
 where (some $ba in $b/child::author satisfies (($ba/child::last = $last) and ($ba/child::first = $first)))
 return $b/child::title
}</result>
}</results>

3.3 Example 3

Here is Q7 from the [XQuery 3.0 Use Cases] , use case XMP (Experiences and Exemplars): "List the titles and years of all books published by Addison-Wesley after 1991, in alphabetic order."

3.3.2 A solution in XQueryX:

<?xml version="1.0"?>
<xqx:module xmlns:xqx="http://www.w3.org/2005/XQueryX"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xsi:schemaLocation="http://www.w3.org/2005/XQueryX
                                http://www.w3.org/2005/XQueryX/xqueryx.xsd">
  <xqx:mainModule>
    <xqx:queryBody>
      <xqx:elementConstructor>
        <xqx:tagName>bib</xqx:tagName>
        <xqx:elementContent>
          <xqx:flworExpr>
            <xqx:forClause>
              <xqx:forClauseItem>
                <xqx:typedVariableBinding>
                  <xqx:varName>b</xqx:varName>
                </xqx:typedVariableBinding>
                <xqx:forExpr>
                  <xqx:pathExpr>
                    <xqx:stepExpr>
                      <xqx:filterExpr>
                        <xqx:functionCallExpr>
                          <xqx:functionName>doc</xqx:functionName>
                          <xqx:arguments>
                            <xqx:stringConstantExpr>
                              <xqx:value>http://bstore1.example.com/bib.xml</xqx:value>
                            </xqx:stringConstantExpr>
                          </xqx:arguments>
                        </xqx:functionCallExpr>
                      </xqx:filterExpr>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:xpathAxis>descendant-or-self</xqx:xpathAxis>
                      <xqx:anyKindTest/>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:xpathAxis>child</xqx:xpathAxis>
                      <xqx:nameTest>book</xqx:nameTest>
                    </xqx:stepExpr>
                  </xqx:pathExpr>
                </xqx:forExpr>
              </xqx:forClauseItem>
            </xqx:forClause>
            <xqx:whereClause>
              <xqx:andOp>
                <xqx:firstOperand>
                  <xqx:equalOp>
                    <xqx:firstOperand>
                      <xqx:pathExpr>
                        <xqx:stepExpr>
                          <xqx:filterExpr>
                            <xqx:varRef>
                              <xqx:name>b</xqx:name>
                            </xqx:varRef>
                          </xqx:filterExpr>
                        </xqx:stepExpr>
                        <xqx:stepExpr>
                          <xqx:xpathAxis>child</xqx:xpathAxis>
                          <xqx:nameTest>publisher</xqx:nameTest>
                        </xqx:stepExpr>
                      </xqx:pathExpr>
                    </xqx:firstOperand>
                    <xqx:secondOperand>
                      <xqx:stringConstantExpr>
                        <xqx:value>Addison-Wesley</xqx:value>
                      </xqx:stringConstantExpr>
                    </xqx:secondOperand>
                  </xqx:equalOp>
                </xqx:firstOperand>
                <xqx:secondOperand>
                  <xqx:greaterThanOp>
                    <xqx:firstOperand>
                      <xqx:pathExpr>
                        <xqx:stepExpr>
                          <xqx:filterExpr>
                            <xqx:varRef>
                              <xqx:name>b</xqx:name>
                            </xqx:varRef>
                          </xqx:filterExpr>
                        </xqx:stepExpr>
                        <xqx:stepExpr>
                          <xqx:xpathAxis>attribute</xqx:xpathAxis>
                          <xqx:nameTest>year</xqx:nameTest>
                        </xqx:stepExpr>
                      </xqx:pathExpr>
                    </xqx:firstOperand>
                    <xqx:secondOperand>
                      <xqx:integerConstantExpr>
                        <xqx:value>1991</xqx:value>
                      </xqx:integerConstantExpr>
                    </xqx:secondOperand>
                  </xqx:greaterThanOp>
                </xqx:secondOperand>
              </xqx:andOp>
            </xqx:whereClause>
            <xqx:orderByClause>
              <xqx:orderBySpec>
                <xqx:orderByExpr>
                  <xqx:pathExpr>
                    <xqx:stepExpr>
                      <xqx:filterExpr>
                        <xqx:varRef>
                          <xqx:name>b</xqx:name>
                        </xqx:varRef>
                      </xqx:filterExpr>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:xpathAxis>child</xqx:xpathAxis>
                      <xqx:nameTest>title</xqx:nameTest>
                    </xqx:stepExpr>
                  </xqx:pathExpr>
                </xqx:orderByExpr>
              </xqx:orderBySpec>
            </xqx:orderByClause>
            <xqx:returnClause>
             <xqx:elementConstructor>
               <xqx:tagName>book</xqx:tagName>
               <xqx:elementContent>
                 <xqx:pathExpr>
                   <xqx:stepExpr>
                     <xqx:filterExpr>
                       <xqx:varRef>
                         <xqx:name>b</xqx:name>
                       </xqx:varRef>
                     </xqx:filterExpr>
                   </xqx:stepExpr>
                   <xqx:stepExpr>
                     <xqx:xpathAxis>attribute</xqx:xpathAxis>
                     <xqx:nameTest>year</xqx:nameTest>
                   </xqx:stepExpr>
                 </xqx:pathExpr>
                 <xqx:pathExpr>
                   <xqx:stepExpr>
                     <xqx:filterExpr>
                       <xqx:varRef>
                         <xqx:name>b</xqx:name>
                       </xqx:varRef>
                     </xqx:filterExpr>
                   </xqx:stepExpr>
                   <xqx:stepExpr>
                     <xqx:xpathAxis>child</xqx:xpathAxis>
                     <xqx:nameTest>title</xqx:nameTest>
                   </xqx:stepExpr>
                 </xqx:pathExpr>
               </xqx:elementContent>
             </xqx:elementConstructor>
            </xqx:returnClause>
          </xqx:flworExpr>
        </xqx:elementContent>
      </xqx:elementConstructor>
    </xqx:queryBody>
  </xqx:mainModule>
</xqx:module>

3.3.3 Transformation of XQueryX Solution into XQuery

Application of the stylesheet in B Transforming XQueryX to XQuery to the XQueryX solution results in:

  
<bib>{
 for $b in doc("http://bstore1.example.com/bib.xml")/descendant-or-self::node()/child::book
 where (($b/child::publisher = "Addison-Wesley") and ($b/attribute::year > 1991))
 order by $b/child::title 
 return <book>{$b/attribute::year}{$b/child::title}</book>
}</bib>

3.4 Example 4

Here is Q8 from the [XQuery 3.0 Use Cases] , use case NS (Queries Using Namespaces): "Select all traders (either seller or high bidder) without negative comments."

3.4.2 A solution in XQueryX:

<?xml version="1.0"?>
<!--  ================================================================================  -->
<!--  Errata applied:                                                                   -->
<!--    XQX.E2 - Editorial (Bugzilla Bug 4963)                                          -->
<!--  ================================================================================  -->
<xqx:module xmlns:xqx="http://www.w3.org/2005/XQueryX"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xsi:schemaLocation="http://www.w3.org/2005/XQueryX
                          http://www.w3.org/2005/XQueryX/xqueryx.xsd">
  <xqx:mainModule>
    <xqx:prolog>
      <xqx:namespaceDecl>
        <xqx:prefix>ma</xqx:prefix>
        <xqx:uri>http://www.example.com/AuctionWatch</xqx:uri>
      </xqx:namespaceDecl>
    </xqx:prolog>
    <xqx:queryBody>
      <xqx:elementConstructor>
        <xqx:tagName>Q8</xqx:tagName>
        <xqx:attributeList>
          <xqx:namespaceDeclaration>
            <xqx:prefix>ma</xqx:prefix>
            <xqx:uri>http://www.example.com/AuctionWatch</xqx:uri>
          </xqx:namespaceDeclaration>
          <xqx:namespaceDeclaration>
            <xqx:prefix>eachbay</xqx:prefix>
            <xqx:uri>http://www.example.com/auctioneers#eachbay</xqx:uri>
          </xqx:namespaceDeclaration>
          <xqx:namespaceDeclaration>
            <xqx:prefix>xlink</xqx:prefix>
            <xqx:uri>http://www.w3.org/1999/xlink</xqx:uri>
          </xqx:namespaceDeclaration>
        </xqx:attributeList>
        <xqx:elementContent>
          <xqx:flworExpr>
            <xqx:forClause>
              <xqx:forClauseItem>
                <xqx:typedVariableBinding>
                  <xqx:varName>s</xqx:varName>
                </xqx:typedVariableBinding>
                <xqx:forExpr>
                  <xqx:pathExpr>
                    <xqx:stepExpr>
                      <xqx:filterExpr>
                        <xqx:functionCallExpr>
                          <xqx:functionName xqx:prefix="fn">doc</xqx:functionName>
                          <xqx:arguments>
                            <xqx:stringConstantExpr>
                              <xqx:value>auction.xml</xqx:value>
                            </xqx:stringConstantExpr>
                          </xqx:arguments>
                        </xqx:functionCallExpr>
                      </xqx:filterExpr>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:xpathAxis>descendant-or-self</xqx:xpathAxis>
                      <xqx:anyKindTest/>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:xpathAxis>child</xqx:xpathAxis>
                      <xqx:nameTest xqx:prefix="ma">Trading_Partners</xqx:nameTest>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:filterExpr>
                        <xqx:sequenceExpr>
                          <xqx:unionOp>
                            <xqx:firstOperand>
                              <xqx:pathExpr>
                                <xqx:stepExpr>
                                  <xqx:xpathAxis>child</xqx:xpathAxis>
                                  <xqx:nameTest xqx:prefix="ma">Seller</xqx:nameTest>
                                </xqx:stepExpr>
                              </xqx:pathExpr>
                            </xqx:firstOperand>
                            <xqx:secondOperand>
                              <xqx:pathExpr>
                                <xqx:stepExpr>
                                  <xqx:xpathAxis>child</xqx:xpathAxis>
                                  <xqx:nameTest xqx:prefix="ma">High_Bidder</xqx:nameTest>
                                </xqx:stepExpr>
                              </xqx:pathExpr>
                            </xqx:secondOperand>
                          </xqx:unionOp>
                        </xqx:sequenceExpr>
                      </xqx:filterExpr>
                    </xqx:stepExpr>
                  </xqx:pathExpr>
                </xqx:forExpr>
              </xqx:forClauseItem>
            </xqx:forClause>
            <xqx:whereClause>
              <xqx:equalOp>
                <xqx:firstOperand>
                  <xqx:pathExpr>
                    <xqx:stepExpr>
                      <xqx:filterExpr>
                        <xqx:varRef>
                          <xqx:name>s</xqx:name>
                        </xqx:varRef>
                      </xqx:filterExpr>
                    </xqx:stepExpr>
                    <xqx:stepExpr>
                      <xqx:xpathAxis>child</xqx:xpathAxis>
                      <xqx:Wildcard>
                        <xqx:star/>
                        <xqx:NCName>NegativeComments</xqx:NCName>
                      </xqx:Wildcard>
                    </xqx:stepExpr>
                  </xqx:pathExpr>
                </xqx:firstOperand>
                <xqx:secondOperand>
                  <xqx:integerConstantExpr>
                    <xqx:value>0</xqx:value>
                  </xqx:integerConstantExpr>
                </xqx:secondOperand>
              </xqx:equalOp>
            </xqx:whereClause>
            <xqx:returnClause>
              <xqx:varRef>
                <xqx:name>s</xqx:name>
              </xqx:varRef>
            </xqx:returnClause>
          </xqx:flworExpr>
        </xqx:elementContent>
      </xqx:elementConstructor>
    </xqx:queryBody>
  </xqx:mainModule>
</xqx:module>

3.4.3 Transformation of XQueryX Solution into XQuery

Application of the stylesheet in B Transforming XQueryX to XQuery to the XQueryX solution results in:

  
declare namespace ma="http://www.example.com/AuctionWatch";
<Q8 xmlns:ma="http://www.example.com/AuctionWatch"
    xmlns:eachbay="http://www.example.com/auctioneers#eachbay"
    xmlns:xlink="http://www.w3.org/1999/xlink">{
 for $s in fn:doc("auction.xml")/descendant-or-self::node()/
                                 child::ma:Trading_Partners/
                                 ((child::ma:Seller union child::ma:High_Bidder))
 where ($s/child::*:NegativeComments = 0)
 return $s
}</Q8>

4 An XML Schema for the XQuery XML Syntax

Here is the XML Schema against which XQueryX documents must be valid.

<?xml version="1.0"?>
<!--  ================================================================================  -->
<!--  NOTES TO READERS OF THIS SCHEMA:                                                  -->
<!--  The default value for both minOccurs and maxOccurs is "1".                        -->
<!--  The XQueryX schema has been designed to provide the ability to extend definitions -->
<!--    of top-level elements in extensions such as Full-Text and the Update Facility.  -->
<!--    The nature of the modification is to define named complex types and redefine    -->
<!--    those top-level elements in terms of the named complex types.                   -->
<!--  ================================================================================  -->
<!--  Changes from Recommendation (edition 1):                                          -->
<!--  * Element defs using anon complex types changed to use named types (bug #4924)    -->
<!--  * In Example 4, replaced xqx:parentheziedExpr with xqx:sequenceExpr (bug #4963)   -->
<!--  * In XSLT stylesheet, deleted template for xqx:parenthesizedExpr (bug #4963)      -->
<!--  * Replaced link to grammar applet with correct link (bug #5323)                   -->
<!--  * In XSLT stylesheet, corrected template for xqx:namespaceDeclaration (bug #5343) -->
<!--  Changes from Recommendation (edition 2):                                          -->
<!--  * Added support for new Windowing clause in FLWOR expression                      -->
<!--  * Added support for new Group By Clause in FLWOR expression                       -->
<!--  * Added support for new Count Clause in FLWOR expression                          -->
<!--  * Added support for keyword "outer" on for expression                             -->
<!--  * Modified structure of FLWOR clause per "simplified FLWOR expressions"           -->
<!--  * Modified validation syntax per Bugzilla Bug 5472                                -->
<!--  * Modified function declaration so that external functions can be nondeterminstic -->
<!--  * Modified variable declaration so external variables can have an initial value   -->
<!--  * Added support for new try-catch expression                                      -->
<!--  * Added support for new decimal formatting declaration                            -->
<!--  * Added support for encoding in the version declaration                           -->
<!--  * Added support for new context item declaration                                  -->
<!--  * Added support for computed namespace constructor                                -->
<!--  * Made changes triggered by Bugzilla Bugs 6309, 6310, and 6311                    -->
<!--  * Modified errlist syntax per Bugzilla Bug 7053                                   -->
<!--  * Added support for public/private functions                                      -->
<!--  * Replaced "outer for" support with support for "allowing empty"                  -->
<!--  * Added support for higher-order functions                                        -->
<!--  * Added support for value-based "switch" expression                               -->
<!--  * Use pattern to prohibit "#)" in pragma contents per Bugzilla Bug 2711           -->
<!--  * Changed functionItemExpr child element QName to be functionName for consistency -->
<!--  * Replaced "public", "private", and "[non]deterministic" with %-annotations       -->
<!--  ================================================================================  -->
<!--  Errata applied:                                                                   -->
<!--    XQX.E1 - Editorial (Bugzilla Bug 4924)                                          -->
<!--    XQX.E7 - Substantive (Bugzilla Bug 2711)                                        -->
<!--  ================================================================================  -->
<!--  Modifications:                                                                    -->
<!--    2008-07-30 - Add XQuery 1.1 grouping and windowing support                      -->
<!--    2008-09-18 - Add XQuery 1.1 count and outer-for support, simplified FLWOR       -->
<!--    2008-09-27 - Add validation type, nondeterministic function declarations,       -->
<!--                 initial values for external variables, try-catch expression        -->
<!--    2008-11-25 - Add support for number formatting, Snelson's version declaration   -->
<!--                 proposal, context item declaration, computed namespace constructor,-->
<!--                 fixes for validate expression, and change to allow the count       -->
<!--                 clause to only be an intermediate expression                       -->
<!--    2009-01-13 - Bugs 6309 and 6310 (fixes to details of certain windowing clauses  -->
<!--    2009-03-03 - tumblingWindowClause syntax now matches slidingWindowClause syntax -->
<!--    2009-09-06 - Modified errlist syntax per Bugzilla Bug 7053                      -->
<!--    2009-10-09 - Added support for private/public functions                         -->
<!--                 Replace "outer for" with "allowing empty"                          -->
<!--    2009-10-22 - Add support for higher-order functions & switch expression         -->
<!--    2010-04-06 - Changed functionItemExpr child QName -> functionName (consistency) -->
<!--    2010-05-10 - Added %-annotation support for varDecl and functionDecl            -->
<!--    2010-06-23 - Added support for partial function application                     -->
<!--  ================================================================================  -->

<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns="http://www.w3.org/2005/XQueryX"
            targetNamespace="http://www.w3.org/2005/XQueryX"
            elementFormDefault="qualified" attributeFormDefault="qualified">


<!-- A few helper declarations                                                          -->
  <xsd:complexType name="emptyContent"/>

  <xsd:element name="NCName" type="xsd:NCName"/>

  <xsd:complexType name="QName">
    <xsd:simpleContent>
      <xsd:extension base="xsd:NCName">
        <xsd:attribute name="prefix" type="xsd:NCName" use="optional"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- The base expression class                                                          -->
  <xsd:complexType name="expr"/>

  <xsd:element name="expr" type="expr" abstract="true"/>


<!-- A list of expressions                                                              -->
  <xsd:complexType name="exprList">
    <xsd:sequence>
      <xsd:element ref="expr" minOccurs="0" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

<!-- A list of expressions or placeholders                                              -->
<!-- 2010-06-23 - Added support for partial function application                        -->
  <xsd:complexType name="exprOrPlaceholderList">
    <xsd:sequence>
      <xsd:choice minOccurs="0" maxOccurs="unbounded">
        <xsd:element ref="expr"/>
        <xsd:element name="argumentPlaceholder" type="emptyContent"/>
      </xsd:choice>
    </xsd:sequence>
  </xsd:complexType>

<!-- A type to be used by elements that comprise an optional expr                       -->
  <xsd:complexType name="exprWrapperOptional">
    <xsd:sequence>
      <xsd:element ref="expr" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

<!-- Simple wrapper class                                                               -->
  <xsd:complexType name="exprWrapper">
    <xsd:sequence>
      <xsd:element ref="expr"/>
    </xsd:sequence>
  </xsd:complexType>

<!-- constant expressions. We have 4 different subclasses for this                      -->
  <xsd:complexType name="constantExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="value" type="xsd:anyType"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="constantExpr" type="constantExpr" abstract="true"
               substitutionGroup="expr"/>


  <xsd:complexType name="integerConstantExpr">
    <xsd:complexContent>
      <xsd:restriction base="constantExpr">
        <xsd:sequence>
          <xsd:element name="value" type="xsd:integer"/>
        </xsd:sequence>
      </xsd:restriction>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="integerConstantExpr" type="integerConstantExpr"
               substitutionGroup="constantExpr"/>


  <xsd:complexType name="decimalConstantExpr">
    <xsd:complexContent>
      <xsd:restriction base="constantExpr">
        <xsd:sequence>
          <xsd:element name="value" type="xsd:decimal"/>
        </xsd:sequence>
      </xsd:restriction>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="decimalConstantExpr" type="decimalConstantExpr"
               substitutionGroup="constantExpr"/>


  <xsd:complexType name="doubleConstantExpr">
    <xsd:complexContent>
      <xsd:restriction base="constantExpr">
        <xsd:sequence>
          <xsd:element name="value" type="xsd:double"/>
        </xsd:sequence>
      </xsd:restriction>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="doubleConstantExpr" type="doubleConstantExpr"
               substitutionGroup="constantExpr"/>


  <xsd:complexType name="stringConstantExpr">
    <xsd:complexContent>
      <xsd:restriction base="constantExpr">
        <xsd:sequence>
          <xsd:element name="value" type="xsd:string"/>
        </xsd:sequence>
      </xsd:restriction>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="stringConstantExpr" type="stringConstantExpr"
               substitutionGroup="constantExpr"/>


<!-- Variables                                                                          -->
  <xsd:complexType name="varRef">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="name" type="QName"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="varRef" type="varRef" substitutionGroup="expr"/>


<!-- root and context-item expressions                                                  -->
<!-- rootExpr deleted per Bugzilla Bug #2523                                            -->
  <xsd:complexType name="contextItemExpr">
    <xsd:complexContent>
      <xsd:extension base="expr"/>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="contextItemExpr" type="contextItemExpr"
               substitutionGroup="expr"/>


<!-- Pragmas and extension expressions                                                  -->
<!--   2010-01-01, JM replaced pragmaContents elem def'n with one that has a pattern    -->
  <xsd:complexType name="pragma">
    <xsd:sequence>
      <xsd:element name="pragmaName" type="QName"/>
      <xsd:element name="pragmaContents">
        <xsd:simpleType>
          <xsd:restriction base="xsd:string">
            <xsd:pattern value="(([^#]|#+[^\)#])*#*)"/>
          </xsd:restriction>
        </xsd:simpleType>
      </xsd:element>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="pragma" type="pragma"/>


  <xsd:complexType name="extensionExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element ref="pragma" maxOccurs="unbounded"/>
          <xsd:element name="argExpr" type="exprWrapper" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="extensionExpr" type="extensionExpr"
               substitutionGroup="expr"/>


<!-- Function call expressions                                                          -->
<!-- 2010-06-23 - Added support for partial function application                        -->
  <xsd:complexType name="functionCallExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="functionName" type="QName"/>
          <xsd:element name="arguments" type="exprOrPlaceholderList" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="functionCallExpr" type="functionCallExpr"
               substitutionGroup="expr"/>


<!-- Constructor functions                                                              -->
  <xsd:complexType name="constructorFunctionExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="typeName" type="QName"/>
          <xsd:element name="argExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="constructorFunctionExpr" type="constructorFunctionExpr"
               substitutionGroup="expr"/>


<!-- Sequence expressions                                                               -->
  <xsd:complexType name="sequenceExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element ref="expr" minOccurs="0" maxOccurs="unbounded"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="sequenceExpr" type="sequenceExpr" substitutionGroup="expr"/>


  <xsd:complexType name="rangeSequenceExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="startExpr" type="exprWrapper"/>
          <xsd:element name="endExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="rangeSequenceExpr" type="rangeSequenceExpr"
               substitutionGroup="expr"/>


<!-- Builtin operator expressions                                                       -->
  <xsd:complexType name="operatorExpr">
    <xsd:complexContent>
      <xsd:extension base="expr"/>
    </xsd:complexContent>
  </xsd:complexType>


  <xsd:complexType name="unaryOperatorExpr">
    <xsd:complexContent>
      <xsd:extension base="operatorExpr">
        <xsd:sequence>
          <xsd:element name="operand" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>


  <xsd:complexType name="binaryOperatorExpr">
    <xsd:complexContent>
      <xsd:extension base="operatorExpr">
        <xsd:sequence>
          <xsd:element name="firstOperand" type="exprWrapper"/>
          <xsd:element name="secondOperand" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>


  <xsd:element name="operatorExpr" type="operatorExpr"
               abstract="true" substitutionGroup="expr"/>

  <xsd:element name="arithmeticOp" type="operatorExpr"
               abstract="true" substitutionGroup="operatorExpr"/>

  <xsd:element name="addOp" type="binaryOperatorExpr"
               substitutionGroup="arithmeticOp"/>

  <xsd:element name="subtractOp" type="binaryOperatorExpr"
               substitutionGroup="arithmeticOp"/>

  <xsd:element name="multiplyOp" type="binaryOperatorExpr"
               substitutionGroup="arithmeticOp"/>

  <xsd:element name="divOp" type="binaryOperatorExpr"
               substitutionGroup="arithmeticOp"/>

  <xsd:element name="idivOp" type="binaryOperatorExpr"
               substitutionGroup="arithmeticOp"/>

  <xsd:element name="modOp" type="binaryOperatorExpr"
               substitutionGroup="arithmeticOp"/>

  <xsd:element name="unaryMinusOp" type="unaryOperatorExpr"
               substitutionGroup="arithmeticOp"/>

  <xsd:element name="unaryPlusOp" type="unaryOperatorExpr"
               substitutionGroup="arithmeticOp"/>

  <xsd:element name="comparisonOp" type="binaryOperatorExpr" abstract="true"
               substitutionGroup="operatorExpr"/>

  <xsd:element name="valueComparisonOp" type="binaryOperatorExpr" abstract="true"
               substitutionGroup="operatorExpr"/>

  <xsd:element name="eqOp" type="binaryOperatorExpr"
               substitutionGroup="valueComparisonOp"/>

  <xsd:element name="neOp" type="binaryOperatorExpr"
               substitutionGroup="valueComparisonOp"/>

  <xsd:element name="gtOp" type="binaryOperatorExpr"
               substitutionGroup="valueComparisonOp"/>

  <xsd:element name="geOp" type="binaryOperatorExpr"
               substitutionGroup="valueComparisonOp"/>

  <xsd:element name="ltOp" type="binaryOperatorExpr"
               substitutionGroup="valueComparisonOp"/>

  <xsd:element name="leOp" type="binaryOperatorExpr"
               substitutionGroup="valueComparisonOp"/>

  <xsd:element name="generalComparisonOp" type="binaryOperatorExpr" abstract="true"
               substitutionGroup="operatorExpr"/>

  <xsd:element name="equalOp" type="binaryOperatorExpr"
               substitutionGroup="generalComparisonOp"/>

  <xsd:element name="notEqualOp" type="binaryOperatorExpr"
               substitutionGroup="generalComparisonOp"/>

  <xsd:element name="lessThanOp" type="binaryOperatorExpr"
               substitutionGroup="generalComparisonOp"/>

  <xsd:element name="lessThanOrEqualOp" type="binaryOperatorExpr"
               substitutionGroup="generalComparisonOp"/>

  <xsd:element name="greaterThanOp" type="binaryOperatorExpr"
               substitutionGroup="generalComparisonOp"/>

  <xsd:element name="greaterThanOrEqualOp" type="binaryOperatorExpr"
               substitutionGroup="generalComparisonOp"/>

  <xsd:element name="nodeComparisonOp" type="binaryOperatorExpr" abstract="true"
               substitutionGroup="operatorExpr"/>

  <xsd:element name="isOp" type="binaryOperatorExpr"
               substitutionGroup="nodeComparisonOp"/>

  <xsd:element name="orderComparisonOp" type="binaryOperatorExpr" abstract="true"
               substitutionGroup="operatorExpr"/>

  <xsd:element name="nodeBeforeOp" type="binaryOperatorExpr"
               substitutionGroup="orderComparisonOp"/>

  <xsd:element name="nodeAfterOp" type="binaryOperatorExpr"
               substitutionGroup="orderComparisonOp"/>

  <xsd:element name="logicalOp" type="binaryOperatorExpr" abstract="true"
               substitutionGroup="operatorExpr"/>

  <xsd:element name="andOp" type="binaryOperatorExpr"
               substitutionGroup="logicalOp"/>

  <xsd:element name="orOp" type="binaryOperatorExpr"
               substitutionGroup="logicalOp"/>

  <xsd:element name="setOp" type="binaryOperatorExpr"
               abstract="true" substitutionGroup="operatorExpr"/>

  <xsd:element name="unionOp" type="binaryOperatorExpr"
               substitutionGroup="setOp"/>

  <xsd:element name="intersectOp" type="binaryOperatorExpr"
               substitutionGroup="setOp"/>

  <xsd:element name="exceptOp" type="binaryOperatorExpr"
               substitutionGroup="setOp"/>


<!-- Basic typenames                                                                    -->
  <xsd:element name="atomicType" type="QName" substitutionGroup="itemType"/>


<!-- Used in castable expression and cast expression                                    -->
  <xsd:complexType name="singleType">
    <xsd:sequence>
      <xsd:element ref="atomicType"/>
      <xsd:element name="optional" type="emptyContent" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="singleType" type="singleType"/>


<!-- Item type schema types and elements                                                -->
  <xsd:element name="itemType" abstract="true"/>


  <xsd:complexType name="emptyItemTypeContent"/>

  <xsd:element name="anyItemType" type="emptyItemTypeContent"
               substitutionGroup="itemType"/>


  <xsd:simpleType name="occurrenceIndicator">
    <xsd:restriction base="xsd:string">
      <xsd:enumeration value="?"/>
      <xsd:enumeration value="*"/>
      <xsd:enumeration value="+"/>
    </xsd:restriction>
  </xsd:simpleType>


<!-- Sequence type                                                                      -->
  <xsd:complexType name="sequenceType">
    <xsd:choice>
      <xsd:element name="voidSequenceType" type="emptyContent"/>
      <xsd:sequence>
        <xsd:element ref="itemType"/>
        <xsd:element name="occurrenceIndicator" type="occurrenceIndicator"
                     minOccurs="0"/>
      </xsd:sequence>
    </xsd:choice>
  </xsd:complexType>

  <xsd:element name="sequenceType" type="sequenceType"/>

  <xsd:element name="typeDeclaration" type="sequenceType"/>


<!-- Represents a "typed" variable (for clause, let clause etc)                         -->
  <xsd:complexType name="typedVariableBinding">
    <xsd:sequence>
      <xsd:element name="varName" type="QName"/>
      <xsd:element ref="typeDeclaration" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="typedVariableBinding" type="typedVariableBinding"/>


<!-- Represents an untyped variable for the "at" clause in a for clause                 -->
  <xsd:element name="positionalVariableBinding" type="QName"/>

  <xsd:element name="variableBinding" type="QName"/>


<!-- Represents all variable bindings in a for or let clause except typed and           -->
<!--   positional variable bindings                                                     -->
  <xsd:element name="forLetClauseItemExtensions" abstract="true"/>


<!-- Major syntax productions: FLWOR clause components                                  -->
<!-- for clause                                                                         -->
  <xsd:complexType name="forClauseItem">
    <xsd:sequence>
      <xsd:element ref="typedVariableBinding"/>
      <xsd:element name="allowingEmpty" type="emptyContent"
                   minOccurs="0"/>
      <xsd:element ref="positionalVariableBinding" minOccurs="0" maxOccurs="1"/>
      <xsd:element ref="forLetClauseItemExtensions" minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="forExpr" type="exprWrapper"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="forClauseItem" type="forClauseItem"/>


  <xsd:complexType name="forClause">
    <xsd:sequence>
      <xsd:element ref="forClauseItem" minOccurs="1" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="forClause" type="forClause"/>


<!-- let clause                                                                         -->
  <xsd:complexType name="letClauseItem">
    <xsd:sequence>
      <xsd:choice>
        <xsd:sequence>
          <xsd:element ref="typedVariableBinding"/>
          <xsd:element ref="forLetClauseItemExtensions"
                       minOccurs="0" maxOccurs="unbounded"/>
        </xsd:sequence>
        <xsd:element ref="forLetClauseItemExtensions"
                     minOccurs="0" maxOccurs="unbounded"/>
      </xsd:choice>
      <xsd:element name="letExpr" type="exprWrapper"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="letClauseItem" type="letClauseItem"/>


  <xsd:complexType name="letClause">
    <xsd:sequence>
      <xsd:element ref="letClauseItem" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="letClause" type="letClause"/>


<!-- This is the windowClause (part of FLWOR expression)                                -->
<!-- It corresponds to the following XQuery grammar                                     -->
<!--	WindowClause ::= "for" (TumblingWindowClause | SlidingWindowClause)               -->
  <xsd:complexType name="windowClause">
    <xsd:choice>
      <xsd:element ref="tumblingWindowClause"/>
      <xsd:element ref="slidingWindowClause"/>
    </xsd:choice>
  </xsd:complexType>

  <xsd:element name="windowClause" type="windowClause"/>


<!-- This is the tumblingWindowClause                                                   -->
<!-- It corresponds to the following XQuery grammar                                     -->
<!-- TumblingWindowClause ::= "tumbling" "window" "$" VarName TypeDeclaration?          -->
<!--                           "in" ExprSingle WindowStartCondition WindowEndCondition? -->
  <xsd:complexType name="tumblingWindowClause">
    <xsd:sequence>
      <xsd:element ref="typedVariableBinding"/>
      <xsd:element name="bindingSequence" type="exprWrapper"/>
      <xsd:element ref="windowStartCondition"/>
      <xsd:element ref="windowEndCondition" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="tumblingWindowClause" type="tumblingWindowClause"/>


<!-- This is the slidingWindowClause                                                    -->
<!-- It corresponds to the following XQuery grammar                                     -->
<!-- SlidingWindowClause ::= "sliding" "window" "$" VarName TypeDeclaration?            -->
<!--                         "in" ExprSingle WindowStartCondition WindowEndCondition    -->
  <xsd:complexType name="slidingWindowClause">
    <xsd:sequence>
      <xsd:element ref="typedVariableBinding"/>
      <xsd:element name="bindingSequence" type="exprWrapper"/>
      <xsd:element ref="windowStartCondition"/>
      <xsd:element ref="windowEndCondition"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="slidingWindowClause" type="slidingWindowClause"/>


<!-- windowStartCondition                                                               -->
<!-- Corresponds to the following XQuery grammar                                        -->
<!-- WindowStartCondition ::= "start" WindowVars "when" ExprSingle                      -->
  <xsd:complexType name="windowStartCondition">
    <xsd:sequence>
      <xsd:element ref="windowVars" minOccurs="0"/>
      <xsd:element name="winStartExpr" type="exprWrapper"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="windowStartCondition" type="windowStartCondition"/>


<!-- windowEndCondition                                                                 -->
<!-- Corresponds to the following XQuery grammar                                        -->
<!-- WindowEndCondition 	   ::=    	"only"? "end" WindowVars "when" ExprSingle        -->
  <xsd:complexType name="windowEndCondition">
    <xsd:sequence>
      <xsd:element ref="windowVars" minOccurs="0"/>
      <xsd:element name="winEndExpr" type="exprWrapper"/>
    </xsd:sequence>
    <xsd:attribute name="onlyEnd" type="xsd:boolean" default="false"/>
  </xsd:complexType>

  <xsd:element name="windowEndCondition" type="windowEndCondition"/>


<!-- windowVars                                                                         -->
<!-- Corresponds to the following XQuery grammar                                        -->
<!-- WindowVars ::= ("$" CurrentItem)? PositionalVar? ("previous" "$" PreviousItem)?    -->
<!--                ("next" "$" NextItem)?                                              -->
  <xsd:complexType name="windowVars">
    <xsd:sequence>
      <xsd:element name="currentItem" type="QName" minOccurs="0"/>
      <xsd:element ref="positionalVariableBinding" minOccurs="0"/>
      <xsd:element name="previousItem" type="QName" minOccurs="0"/>
      <xsd:element name="nextItem" type="QName" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="windowVars" type="windowVars"/>


<!-- countClause (part of FLWOR expression)                                             -->
  <xsd:complexType name="countClause">
    <xsd:sequence>
      <xsd:element ref="varRef"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="countClause" type="countClause"/>


<!-- whereClause (part of FLWOR expression)                                             -->
  <xsd:element name="whereClause" type="exprWrapper"/>


<!-- groupByClause (part of FLWOR expression)                                           -->
<!-- Corresponds to the following XQuery syntax                                         -->
<!-- GroupByClause ::= "group" "by" GroupingSpecList                                    -->
<!-- GroupingSpecList ::= GroupingSpec ("," GroupingSpec)*                              -->
  <xsd:complexType name="groupByClause">
    <xsd:sequence maxOccurs="unbounded">
      <xsd:element ref="groupingSpec"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="groupByClause" type="groupByClause"/>


<!-- Corresponds to the following XQuery syntax                                         -->
<!-- GroupingSpec ::= "$" VarName ("collation" URILiteral)?                             -->
  <xsd:complexType name="groupingSpec">
    <xsd:sequence>
      <xsd:element name="varName" type="QName"/>
      <xsd:element name="collation" type="xsd:string" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="groupingSpec" type="groupingSpec"/>


<!-- order by clause                                                                    -->
  <xsd:simpleType name="emptyOrderingMode">
    <xsd:restriction base="xsd:string">
      <xsd:enumeration value="empty greatest"/>
      <xsd:enumeration value="empty least"/>
    </xsd:restriction>
  </xsd:simpleType>

  <xsd:simpleType name="orderingKind">
    <xsd:restriction base="xsd:string">
      <xsd:enumeration value="ascending"/>
      <xsd:enumeration value="descending"/>
    </xsd:restriction>
  </xsd:simpleType>


  <xsd:complexType name="orderModifier">
    <xsd:sequence>
      <xsd:element name="orderingKind" type="orderingKind" minOccurs="0"/>
      <xsd:element name="emptyOrderingMode" type="emptyOrderingMode" minOccurs="0"/>
      <xsd:element name="collation" type="xsd:string" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="orderModifier" type="orderModifier"/>


  <xsd:complexType name="orderBySpec">
    <xsd:sequence>
      <xsd:element name="orderByExpr" type="exprWrapper"/>
      <xsd:element ref="orderModifier" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="orderBySpec" type="orderBySpec"/>


  <xsd:complexType name="orderByClause">
    <xsd:sequence>
      <xsd:element name="stable" type="emptyContent" minOccurs="0"/>
      <xsd:element ref="orderBySpec" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="orderByClause" type="orderByClause"/>


<!-- return clause                                                                      -->
  <xsd:element name="returnClause" type="exprWrapper"/>


<!-- This is the XQuery 1.1 flwor expression                                            -->
<!-- Corresponds to the following XQuery syntax:                                        -->
<!-- 1.1 FLWORExpr ::= (ForClause | LetClause | WindowClause)                           -->
<!--                   (ForClause | LetClause | WindowClause | CountClause |            -->
<!--                    WhereClause | GroupByClause | OrderByClause)*                   -->
<!--                   ReturnClause                                                     -->
  <xsd:complexType name="flworExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:choice>
            <xsd:element ref="forClause"/>
            <xsd:element ref="letClause"/>
            <xsd:element ref="windowClause"/>
          </xsd:choice>
          <xsd:sequence>
            <xsd:choice minOccurs="0" maxOccurs="unbounded">
              <xsd:element ref="forClause"/>
              <xsd:element ref="letClause"/>
              <xsd:element ref="windowClause"/>
              <xsd:element ref="countClause"/>
              <xsd:element ref="whereClause"/>
              <xsd:element ref="groupByClause"/>
              <xsd:element ref="orderByClause"/>
            </xsd:choice>
          <xsd:element ref="returnClause"/>
        </xsd:sequence>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="flworExpr" type="flworExpr" substitutionGroup="expr"/>


<!-- conditional expressions                                                            -->
  <xsd:complexType name="ifThenElseExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="ifClause" type="exprWrapper"/>
          <xsd:element name="thenClause" type="exprWrapper"/>
          <xsd:element name="elseClause" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="ifThenElseExpr" type="ifThenElseExpr" 
               substitutionGroup="expr"/>


<!-- The following clauses describe quantified expressions                              -->
  <xsd:simpleType name="quantifier">
    <xsd:restriction base="xsd:NMTOKEN">
      <xsd:enumeration value="some"/>
      <xsd:enumeration value="every"/>
    </xsd:restriction>
  </xsd:simpleType>


  <xsd:complexType name="quantifiedExprInClause">
    <xsd:sequence>
      <xsd:element ref="typedVariableBinding"/>
      <xsd:element name="sourceExpr" type="exprWrapper"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="quantifiedExprInClause" type="quantifiedExprInClause"/>


  <xsd:complexType name="quantifiedExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="quantifier" type="quantifier"/>
          <xsd:element ref="quantifiedExprInClause" maxOccurs="unbounded"/>
          <xsd:element name="predicateExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="quantifiedExpr" type="quantifiedExpr"
               substitutionGroup="expr"/>


<!-- handle the switch expression                                                       -->
<!-- Note: no substitutionGroup as we cannot use this anywhere except within switch     -->
  <xsd:complexType name="switchExprCaseClause">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="switchCaseExpr" type="exprWrapper" maxOccurs="unbounded"/>
          <xsd:element name="resultExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="switchExprCaseClause"
               type="switchExprCaseClause"/>


<!-- Note: no substitutionGroup as we cannot use this anywhere except within switch     -->
  <xsd:complexType name="switchExprDefaultClause">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="resultExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="switchExprDefaultClause"
               type="switchExprDefaultClause"/>


  <xsd:complexType name="switchExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
          <xsd:element ref="switchExprCaseClause" maxOccurs="unbounded"/>
          <xsd:element ref="switchExprDefaultClause"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="switchExpr" type="switchExpr"
               substitutionGroup="expr"/>


<!-- handle the typeswitch expression                                                   -->
<!-- Note: no substitutionGroup as we cannot use this anywhere except within typeswitch -->
  <xsd:complexType name="typeswitchExprCaseClause">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element ref="variableBinding" minOccurs="0"/>
          <xsd:element ref="sequenceType"/>
          <xsd:element name="resultExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="typeswitchExprCaseClause"
               type="typeswitchExprCaseClause"/>


<!-- Note: no substitutionGroup as we cannot use this anywhere except within typeswitch -->
  <xsd:complexType name="typeswitchExprDefaultClause">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element ref="variableBinding" minOccurs="0"/>
          <xsd:element name="resultExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="typeswitchExprDefaultClause"
               type="typeswitchExprDefaultClause"/>


  <xsd:complexType name="typeswitchExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
          <xsd:element ref="typeswitchExprCaseClause" maxOccurs="unbounded"/>
          <xsd:element ref="typeswitchExprDefaultClause"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="typeswitchExpr" type="typeswitchExpr"
               substitutionGroup="expr"/>


<!-- TryCatchExpression                                                                 -->
<!-- Corresponds to the following XQuery syntax                                         -->
<!-- TryCatchExpression ::= TryClause CatchClause+                                      -->
<!-- TryClause ::= "{" TryTargetExpr "}"                                                -->
<!-- TryTargetExpr ::= Expr                                                             -->
  <xsd:complexType name="tryCatchExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="tryClause" type="exprWrapper"/>
          <xsd:element ref="catchClause" maxOccurs="unbounded"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="tryCatchExpr" type="tryCatchExpr"
               substitutionGroup="expr"/>


<!-- CatchClause (part of the TryCatchExpression)                                       -->
<!-- Corresponds to the following XQuery syntax                                         -->
<!-- CatchClause ::= "catch" CatchErrorList CatchVars* "{" Expr "}"                     -->
  <xsd:complexType name="catchClause">
    <xsd:sequence>
      <xsd:element ref="catchErrorList"/>
      <xsd:element ref="catchVars" minOccurs="0"/>
      <xsd:element name="catchExpr" type="exprWrapper"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="catchClause" type="catchClause"/>


<!-- CatchErrorList (part of the TryCatchExpression)                                    -->
<!-- Corresponds to the following XQuery syntax                                         -->
<!-- CatchErrorList ::= NameTest ( "|" NameTest )*                                      -->
<!-- (remembering that NameTest is either QName or Wildcard)                            -->
  <xsd:complexType name="catchErrorList">
    <xsd:sequence maxOccurs="unbounded">
      <xsd:choice>
        <xsd:element ref="nameTest"/>
        <xsd:element ref="Wildcard"/>
      </xsd:choice>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="catchErrorList" type="catchErrorList"/>


<!-- CatchVars (part of the TryCatchExpression)                                         -->
<!-- Corresponds to the following XQuery syntax                                         -->
<!-- CatchVars ::= "(" CatchErrorCode ( "," CatchErrorDesc ( "," CatchErrorVal )? )? ")"-->
<!-- CatchErrorCode ::= "$" VarName                                                     -->
<!-- CatchErrorDesc ::= "$" VarName                                                     -->
<!-- CatchErrorVal ::= "$" VarName                                                      -->
  <xsd:complexType name="catchVars">
    <xsd:sequence>
      <xsd:element name="catchErrorCode">
        <xsd:complexType>
          <xsd:sequence>
            <xsd:element ref="varRef"/>
          </xsd:sequence>
        </xsd:complexType>
      </xsd:element>
      <xsd:sequence minOccurs="0">
        <xsd:element name="catchErrorDesc">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element ref="varRef"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
        <xsd:sequence minOccurs="0">
          <xsd:element name="catchErrorVal">
            <xsd:complexType>
              <xsd:sequence>
                <xsd:element ref="varRef"/>
              </xsd:sequence>
            </xsd:complexType>
          </xsd:element>
        </xsd:sequence>
      </xsd:sequence>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="catchVars" type="catchVars"/>


<!-- instance-of expressions                                                            -->
  <xsd:complexType name="instanceOfExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
          <xsd:element ref="sequenceType"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="instanceOfExpr" type="instanceOfExpr"
               substitutionGroup="expr"/>


<!-- treat-as expressions                                                               -->
  <xsd:complexType name="treatExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
          <xsd:element ref="sequenceType"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="treatExpr" type="treatExpr"
               substitutionGroup="expr"/>


<!-- castable and cast expressions                                                      -->
  <xsd:complexType name="castableExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
          <xsd:element ref="singleType"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="castableExpr" type="castableExpr"
               substitutionGroup="expr"/>


  <xsd:complexType name="castExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
          <xsd:element ref="singleType"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="castExpr" type="castExpr"
               substitutionGroup="expr"/>


<!-- Validate expressions                                                               -->
  <xsd:simpleType name="validationMode">
    <xsd:restriction base="xsd:NMTOKEN">
      <xsd:enumeration value="lax"/>
      <xsd:enumeration value="strict"/>
    </xsd:restriction>
  </xsd:simpleType>

  <xsd:complexType name="validateExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:choice>
            <xsd:element name="validationMode" type="validationMode" minOccurs="0"/>
            <xsd:element ref="sequenceType" minOccurs="0"/>
          </xsd:choice>
          <xsd:element name="argExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="validateExpr" type="validateExpr"
               substitutionGroup="expr"/>


<!-- Direct constructors. Only elementConstructor for now                               -->
<!-- Note the absence of constructors corresponding to                                  -->
<!-- the directCommentConstructor and the directPIConstructor                           -->
<!-- productions in the XQuery grammar. This is because they are                        -->
<!-- trivially identical to the computed variants                                       -->

<!-- attributeConstructor is no longer a subclass of expr                               -->
  <xsd:complexType name="attributeConstructor">
    <xsd:sequence>
      <xsd:element name="attributeName" type="QName"/>
      <xsd:choice>
        <xsd:element name="attributeValueExpr" type="exprList"/>
        <xsd:element name="attributeValue" type="xsd:string"/>
      </xsd:choice>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:complexType name="namespaceDeclaration">
    <xsd:sequence>
      <xsd:element name="prefix" type="xsd:NCName" minOccurs="0"/>
      <xsd:element name="uri" type="xsd:string"/>
    </xsd:sequence>
  </xsd:complexType>


<!-- element constructors                                                               -->
  <xsd:complexType name="attributeList">
    <xsd:sequence>
      <xsd:choice maxOccurs="unbounded">
        <xsd:element name="attributeConstructor" type="attributeConstructor"/>
        <xsd:element name="namespaceDeclaration" type="namespaceDeclaration"/>
      </xsd:choice>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="attributeList" type="attributeList"/>


  <xsd:element name="elementContent" type="exprList"/>


  <xsd:complexType name="elementConstructor">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="tagName" type="QName"/>
          <xsd:element ref="attributeList" minOccurs="0"/>
          <xsd:element ref="elementContent" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="elementConstructor" type="elementConstructor"
               substitutionGroup="expr"/>


<!-- computed constructors                                                              -->
<!-- computed element constructor                                                       -->
  <xsd:complexType name="computedElementConstructor">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:choice>
            <xsd:element name="tagName" type="QName"/>
            <xsd:element name="tagNameExpr" type="exprWrapper"/>
          </xsd:choice>
          <xsd:element name="contentExpr" type="exprWrapper" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="computedElementConstructor" type="computedElementConstructor"
               substitutionGroup="expr"/>


<!-- computed attribute constructor                                                     -->
  <xsd:complexType name="computedAttributeConstructor">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:choice>
            <xsd:element name="tagName" type="QName"/>
            <xsd:element name="tagNameExpr" type="exprWrapper"/>
          </xsd:choice>
          <xsd:element name="valueExpr" type="exprWrapper" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="computedAttributeConstructor" type="computedAttributeConstructor"
               substitutionGroup="expr"/>


<!-- computed document constructor                                                      -->
  <xsd:complexType name="computedDocumentConstructor">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="computedDocumentConstructor" type="computedDocumentConstructor"
               substitutionGroup="expr"/>


<!-- computed text constructor                                                          -->
  <xsd:complexType name="computedTextConstructor">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="computedTextConstructor" type="computedTextConstructor"
               substitutionGroup="expr"/>


<!-- computed comment constructor                                                       -->
  <xsd:complexType name="computedCommentConstructor">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="computedCommentConstructor" type="computedCommentConstructor"
               substitutionGroup="expr"/>


<!-- computed namespace constructor                                                     -->
  <xsd:complexType name="computedNamespaceConstructor">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:choice>
            <xsd:element name="prefix" type="xsd:NCName"/>
            <xsd:element name="prefixExpr" type="exprWrapper"/>
          </xsd:choice>
          <xsd:element name="URIExpr" type="exprWrapper" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="computedNamespaceConstructor" type="computedNamespaceConstructor"
               substitutionGroup="expr"/>


<!-- computed processing instruction constructor                                        -->
  <xsd:complexType name="computedPIConstructor">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:choice>
            <xsd:element name="piTarget" type="xsd:NCName"/>
            <xsd:element name="piTargetExpr" type="exprWrapper"/>
          </xsd:choice>
          <xsd:element name="piValueExpr" type="exprWrapper" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="computedPIConstructor" type="computedPIConstructor"
               substitutionGroup="expr"/>


<!-- ordered and unordered expressions                                                  -->
  <xsd:complexType name="unorderedExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="unorderedExpr" type="unorderedExpr" substitutionGroup="expr"/>


  <xsd:complexType name="orderedExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="argExpr" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="orderedExpr" type="orderedExpr" substitutionGroup="expr"/>


<!-- function item expressions                                                          -->
<!-- literal function item expression                                                   -->
<!-- 2010-04-06: Jim changed child element QName to be functionName for consistency     -->
  <xsd:complexType name="literalFunctionItemExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="functionName" type="QName"/>
          <xsd:element name="integerConstantExpr" type="integerConstantExpr"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="literalFunctionItemExpr" type="literalFunctionItemExpr" substitutionGroup="expr"/>


<!-- inline function item expression                                                    -->
  <xsd:complexType name="inlineFunctionItemExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element ref="paramList"/>
          <xsd:element ref="typeDeclaration" minOccurs="0"/>
          <xsd:element name="functionBody" type="exprWrapper"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="inlineFunctionItemExpr" type="inlineFunctionItemExpr" substitutionGroup="expr"/>


<!-- dynamic function invocations                                                       -->
<!-- 2010-06-23 - Added support for partial function application                        -->
  <xsd:complexType name="dynamicFunctionInvocationExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:sequence>
          <xsd:element name="functionItem">
            <xsd:complexType>
              <xsd:sequence>
                <xsd:group ref="filterExpr"/>
              </xsd:sequence>
            </xsd:complexType>
          </xsd:element>
          <xsd:element name="predicates" type="exprList" minOccurs="0"/>
          <xsd:element name="arguments" type="exprOrPlaceholderList" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="dynamicFunctionInvocationExpr" type="dynamicFunctionInvocationExpr" substitutionGroup="expr"/>


<!-- wildcards                                                                          -->
  <xsd:complexType name="simpleWildcard">
    <xsd:choice>
      <xsd:element name="QName" type="QName"/>
      <xsd:element name="star" type="emptyContent"/>
    </xsd:choice>
  </xsd:complexType>


  <xsd:complexType name="Wildcard">
    <xsd:all>
      <xsd:element name="star" type="emptyContent" minOccurs="0"/>
      <xsd:element ref="NCName" minOccurs="0"/>
    </xsd:all>
  </xsd:complexType>

  <xsd:element name="Wildcard" type="Wildcard"/>


<!-- tests (name and/or type)                                                           -->
  <xsd:element name="schemaAttributeTest" type="QName"
               substitutionGroup="kindTest"/>


  <xsd:complexType name="attributeTest">
    <xsd:complexContent>
      <xsd:extension base="emptyItemTypeContent">
        <xsd:sequence minOccurs="0">
          <xsd:element name="attributeName" type="simpleWildcard"/>
          <xsd:element name="typeName" type="QName" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="attributeTest" type="attributeTest"
               substitutionGroup="kindTest"/>


  <xsd:element name="anyElementTest" abstract="true"
               substitutionGroup="kindTest"/>


  <xsd:element name="schemaElementTest" type="QName"
               substitutionGroup="anyElementTest"/>


  <xsd:complexType name="elementTest">
    <xsd:complexContent>
      <xsd:extension base="emptyItemTypeContent">
        <xsd:sequence minOccurs="0">
          <xsd:element name="elementName" type="simpleWildcard"/>
          <xsd:sequence minOccurs="0">
            <xsd:element name="typeName" type="QName"/>
            <xsd:element name="nillable" type="emptyContent" minOccurs="0"/>
          </xsd:sequence>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="elementTest" type="elementTest"
               substitutionGroup="anyElementTest"/>


  <xsd:complexType name="documentTest">
    <xsd:complexContent>
      <xsd:extension base="emptyItemTypeContent">
        <xsd:sequence>
           <xsd:element ref="anyElementTest" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="documentTest" type="documentTest"
               substitutionGroup="kindTest"/>


  <xsd:complexType name="piTest">
    <xsd:complexContent>
      <xsd:extension base="emptyItemTypeContent">
        <xsd:sequence>
          <xsd:element name="piTarget" type="xsd:NCName" minOccurs="0"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="piTest" type="piTest" substitutionGroup="kindTest"/>


  <xsd:element name="nameTest" type="QName"/>

  <xsd:element name="kindTest" substitutionGroup="itemType"/>

  <xsd:element name="textTest" type="emptyItemTypeContent"
               substitutionGroup="kindTest"/>

  <xsd:element name="commentTest" type="emptyItemTypeContent"
               substitutionGroup="kindTest"/>

  <xsd:element name="namespaceTest" type="emptyItemTypeContent"
               substitutionGroup="kindTest"/>

  <xsd:element name="anyKindTest" type="emptyItemTypeContent"
               substitutionGroup="kindTest"/>


<!-- functionTest variations -->
  <xsd:element name="anyFunctionTest" type="emptyItemTypeContent" substitutionGroup="itemType"/>

  <xsd:complexType name="typedFunctionTest">
    <xsd:complexContent>
      <xsd:extension base="emptyItemTypeContent">
        <xsd:sequence>
          <xsd:element ref="paramTypeList" minOccurs="0"/>
          <xsd:element ref="sequenceType"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="typedFunctionTest" type="typedFunctionTest" substitutionGroup="itemType"/>


  <xsd:complexType name="paramTypeList">
    <xsd:sequence>
      <xsd:element ref="sequenceType" minOccurs="0" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="paramTypeList" type="paramTypeList"/>


  <xsd:complexType name="parenthesizedItemType">
    <xsd:complexContent>
      <xsd:extension base="emptyItemTypeContent">
        <xsd:sequence>
          <xsd:element ref="itemType"/>
        </xsd:sequence>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="parenthesizedItemType" type="parenthesizedItemType" substitutionGroup="itemType"/>


<!-- XPath axes                                                                         -->
  <xsd:simpleType name="xpathAxis">
    <xsd:restriction base="xsd:NMTOKEN">
      <xsd:enumeration value="child"/>
      <xsd:enumeration value="attribute"/>
      <xsd:enumeration value="self"/>
      <xsd:enumeration value="parent"/>
      <xsd:enumeration value="descendant-or-self"/>
      <xsd:enumeration value="descendant"/>
      <xsd:enumeration value="following"/>
      <xsd:enumeration value="following-sibling"/>
      <xsd:enumeration value="ancestor"/>
      <xsd:enumeration value="ancestor-or-self"/>
      <xsd:enumeration value="preceding"/>
      <xsd:enumeration value="preceding-sibling"/>
    </xsd:restriction>
  </xsd:simpleType>

  <xsd:element name="xpathAxis" type="xpathAxis"/>


<!-- filter expressions                                                                 -->
<!-- added literalFunctionItemExpr, inlineFunctionItemExpr, and                         -->
<!--   dynamicFunctionInvocation for higher-order functions                             -->
  <xsd:group name="filterExpr">
    <xsd:choice>
      <xsd:element ref="constantExpr"/>
      <xsd:element ref="varRef"/>
      <xsd:element ref="contextItemExpr"/>
      <xsd:element ref="functionCallExpr"/>
      <xsd:element ref="sequenceExpr"/>
      <xsd:element ref="elementConstructor"/>
      <xsd:element ref="computedElementConstructor"/>
      <xsd:element ref="computedAttributeConstructor"/>
      <xsd:element ref="computedDocumentConstructor"/>
      <xsd:element ref="computedTextConstructor"/>
      <xsd:element ref="computedCommentConstructor"/>
      <xsd:element ref="computedNamespaceConstructor"/>
      <xsd:element ref="computedPIConstructor"/>
      <xsd:element ref="orderedExpr"/>
      <xsd:element ref="unorderedExpr"/>
      <xsd:element ref="literalFunctionItemExpr"/>
      <xsd:element ref="inlineFunctionItemExpr"/>
      <xsd:element ref="dynamicFunctionInvocationExpr"/>
    </xsd:choice>
  </xsd:group>


<!-- step expression                                                                    -->
<!-- removed nameTest and Wildcard outer choices per Bugzilla Bug #2523                 -->
<!-- replaced element "predicates" with choice of "predicates" & "dynamicfunctioninv'n" -->
  <xsd:complexType name="stepExpr">
    <xsd:sequence>
      <xsd:choice>
        <xsd:sequence>
          <xsd:element ref="xpathAxis"/>
          <xsd:choice>
            <xsd:element ref="kindTest"/>
            <xsd:element ref="nameTest"/>
            <xsd:element ref="Wildcard"/>
          </xsd:choice>
        </xsd:sequence>
        <xsd:element name="filterExpr">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:group ref="filterExpr"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:choice>
      <xsd:element name="predicates" type="exprList" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="stepExpr" type="stepExpr"/>


<!-- path expression                                                                    -->
<!-- rewrote pathExpr definition per Bugzilla Bug #2523                                 -->
  <xsd:complexType name="pathExpr">
    <xsd:complexContent>
      <xsd:extension base="expr">
        <xsd:choice>
          <xsd:sequence>
            <xsd:element name="rootExpr" type="emptyContent"/>
            <xsd:element ref="stepExpr" minOccurs="0" maxOccurs="unbounded"/>
          </xsd:sequence>
          <xsd:element ref="stepExpr" maxOccurs="unbounded"/>
        </xsd:choice>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:element name="pathExpr" type="pathExpr" substitutionGroup="expr"/>


<!-- The following constructs deal with the query prolog                                -->
  <xsd:complexType name="module">
    <xsd:sequence>
      <xsd:element ref="versionDecl" minOccurs="0"/>
      <xsd:choice>
        <xsd:element ref="mainModule"/>
        <xsd:element ref="libraryModule"/>
      </xsd:choice>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="module" type="module"/>


  <xsd:complexType name="mainModule">
    <xsd:sequence>
      <xsd:element ref="prolog" minOccurs="0"/>
      <xsd:element name="queryBody" type="exprWrapper"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="mainModule" type="mainModule"/>


  <xsd:complexType name="libraryModule">
    <xsd:sequence>
      <xsd:element ref="moduleDecl"/>
      <xsd:element ref="prolog" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="libraryModule" type="libraryModule"/>


  <xsd:complexType name="versionDecl">
    <xsd:sequence>
      <xsd:element name="version" type="xsd:string" minOccurs="0"/>
      <xsd:element name="encoding" type="xsd:string" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="versionDecl" type="versionDecl"/>


  <xsd:complexType name="prolog">
    <xsd:sequence>
	    <xsd:element ref="prologPartOneItem" minOccurs="0" maxOccurs="unbounded"/>
	    <xsd:element ref="prologPartTwoItem" minOccurs="0" maxOccurs="unbounded"/>
	  </xsd:sequence>
	</xsd:complexType>

  <xsd:element name="prolog" type="prolog"/>


  <xsd:element name="prologPartOneItem" abstract="true"/>


  <xsd:element name="prologPartTwoItem" abstract="true"/>


  <xsd:simpleType name="boundarySpaceDecl">
    <xsd:restriction base="xsd:NMTOKEN">
      <xsd:enumeration value="strip"/>
      <xsd:enumeration value="preserve"/>
    </xsd:restriction>
  </xsd:simpleType>

  <xsd:element name="boundarySpaceDecl" type="boundarySpaceDecl"
               substitutionGroup="prologPartOneItem"/>


  <xsd:element name="defaultCollationDecl" type="xsd:string"
               substitutionGroup="prologPartOneItem"/>


  <xsd:element name="baseUriDecl" type="xsd:string"
               substitutionGroup="prologPartOneItem"/>


  <xsd:simpleType name="constructionDecl">
    <xsd:restriction base="xsd:NMTOKEN">
      <xsd:enumeration value="strip"/>
      <xsd:enumeration value="preserve"/>
    </xsd:restriction>
  </xsd:simpleType>

  <xsd:element name="constructionDecl" type="constructionDecl"
               substitutionGroup="prologPartOneItem"/>


  <xsd:simpleType name="orderingModeDecl">
    <xsd:restriction base="xsd:NMTOKEN">
      <xsd:enumeration value="ordered"/>
      <xsd:enumeration value="unordered"/>
    </xsd:restriction>
  </xsd:simpleType>

  <xsd:element name="orderingModeDecl" type="orderingModeDecl"
               substitutionGroup="prologPartOneItem"/>


  <xsd:element name="emptyOrderingDecl" type="emptyOrderingMode"
               substitutionGroup="prologPartOneItem"/>


  <xsd:complexType name="copyNamespacesDecl">
    <xsd:sequence>
      <xsd:element name="preserveMode">
        <xsd:simpleType>
          <xsd:restriction base="xsd:NMTOKEN">
            <xsd:enumeration value="preserve"/>
            <xsd:enumeration value="no-preserve"/>
          </xsd:restriction>
        </xsd:simpleType>
      </xsd:element>
      <xsd:element name="inheritMode">
        <xsd:simpleType>
          <xsd:restriction base="xsd:NMTOKEN">
            <xsd:enumeration value="inherit"/>
            <xsd:enumeration value="no-inherit"/>
          </xsd:restriction>
        </xsd:simpleType>
      </xsd:element>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="copyNamespacesDecl" type="copyNamespacesDecl"
               substitutionGroup="prologPartOneItem"/>


  <xsd:simpleType name="defaultNamespaceCategory">
    <xsd:restriction base="xsd:NMTOKEN">
      <xsd:enumeration value="function"/>
      <xsd:enumeration value="element"/>
    </xsd:restriction>
  </xsd:simpleType>

  <xsd:complexType name="defaultNamespaceDecl">
    <xsd:sequence>
      <xsd:element name="defaultNamespaceCategory" type="defaultNamespaceCategory"/>
      <xsd:element name="uri" type="xsd:string"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="defaultNamespaceDecl" type="defaultNamespaceDecl"
               substitutionGroup="prologPartOneItem"/>


  <xsd:complexType name="namespaceDeclType">
    <xsd:sequence>
      <xsd:element name="prefix" type="xsd:NCName"/>
      <xsd:element name="uri" type="xsd:string"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="namespaceDecl" type="namespaceDeclType"
               substitutionGroup="prologPartOneItem"/>


  <xsd:element name="moduleDecl" type="namespaceDeclType"/>


  <xsd:complexType name="decimalFormatDeclType">
        <xsd:sequence>
          <xsd:element name="decimalFormatName" type="xsd:QName" minOccurs="0"/>
          <xsd:element name="decimalFormatParam" minOccurs="0" maxOccurs="unbounded">
            <xsd:complexType>
              <xsd:sequence>
                <xsd:element name="decimalFormatParamName">
                  <xsd:simpleType>
                    <xsd:restriction base="xsd:NMTOKEN">
                      <xsd:enumeration value="decimal-separator"/>
                      <xsd:enumeration value="grouping-separator"/>
                      <xsd:enumeration value="infinity"/>
                      <xsd:enumeration value="minus-sign"/>
                      <xsd:enumeration value="NaN"/>
                      <xsd:enumeration value="percent"/>
                      <xsd:enumeration value="per-mille"/>
                      <xsd:enumeration value="zero-digit"/>
                      <xsd:enumeration value="digit"/>
                      <xsd:enumeration value="pattern-separator"/>
                    </xsd:restriction>
                  </xsd:simpleType>
                </xsd:element>
                <xsd:element name="decimalFormatParamValue" type="xsd:string"/>
              </xsd:sequence>
            </xsd:complexType>
          </xsd:element>
        </xsd:sequence>
        <xsd:attribute name="default" default="false">
          <xsd:simpleType>
            <xsd:restriction base="xsd:NMTOKEN">
              <xsd:enumeration value="true"/>
              <xsd:enumeration value="false"/>
            </xsd:restriction>
          </xsd:simpleType>
        </xsd:attribute>
  </xsd:complexType>

  <xsd:element name="decimalFormatDecl" type="decimalFormatDeclType"
               substitutionGroup="prologPartOneItem"/>


  <xsd:complexType name="schemaImport">
    <xsd:sequence>
      <xsd:choice minOccurs="0">
        <xsd:element name="namespacePrefix" type="xsd:NCName"/>
        <xsd:element name="defaultElementNamespace" type="emptyContent"/>
      </xsd:choice>
      <xsd:element name="targetNamespace" type="xsd:string"/>
      <xsd:element name="targetLocation" type="xsd:string"
                   minOccurs="0" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="schemaImport" type="schemaImport"
               substitutionGroup="prologPartOneItem"/>


  <xsd:complexType name="moduleImport">
    <xsd:sequence>
      <xsd:element name="namespacePrefix" type="xsd:NCName" minOccurs="0"/>
      <xsd:element name="targetNamespace" type="xsd:string"/>
      <xsd:element name="targetLocation" type="xsd:string"
                   minOccurs="0" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="moduleImport" type="moduleImport"
               substitutionGroup="prologPartOneItem"/>


  <xsd:complexType name="contextItemDecl">
    <xsd:sequence>
      <xsd:element ref="typeDeclaration" minOccurs="0"/>
      <xsd:choice>
        <xsd:element name="varValue" type="exprWrapper"/>
        <xsd:sequence>
          <xsd:element name="external">
            <xsd:complexType>
              <xsd:sequence>
                <xsd:element name="varValue" type="exprWrapper" minOccurs="0"/>
              </xsd:sequence>
            </xsd:complexType>
          </xsd:element>
        </xsd:sequence>
      </xsd:choice>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="contextItemDecl" type="contextItemDecl"
               substitutionGroup="prologPartTwoItem"/>


<!-- For %-annotations                                                                  -->
  <xsd:complexType name="annotation">
    <xsd:sequence>
      <xsd:element name="annotationName" type="QName"/>
      <xsd:element name="arguments" type="exprList" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>


  <xsd:complexType name="varDecl">
    <xsd:sequence>
      <xsd:element name="annotation" type="annotation"
                   minOccurs="0" maxOccurs="unbounded"/>
      <xsd:element name="varName" type="QName"/>
      <xsd:element ref="typeDeclaration" minOccurs="0"/>
      <xsd:choice>
        <xsd:element name="varValue" type="exprWrapper"/>
        <xsd:sequence>
          <xsd:element name="external">
            <xsd:complexType>
              <xsd:sequence>
                <xsd:element name="varValue" type="exprWrapper" minOccurs="0"/>
              </xsd:sequence>
            </xsd:complexType>
          </xsd:element>
        </xsd:sequence>
      </xsd:choice>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="varDecl" type="varDecl"
               substitutionGroup="prologPartTwoItem"/>


  <xsd:complexType name="optionDecl">
    <xsd:sequence>
      <xsd:element name="optionName" type="QName"/>
      <xsd:element name="optionContents" type="xsd:string"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="optionDecl" type="optionDecl"
               substitutionGroup="prologPartTwoItem"/>


  <xsd:complexType name="functionDecl">
    <xsd:sequence>
      <xsd:element name="annotation" type="annotation"
                   minOccurs="0" maxOccurs="unbounded"/>
      <xsd:element name="functionName" type="QName"/>
      <xsd:element ref="paramList"/>
      <xsd:element ref="typeDeclaration" minOccurs="0"/>
      <xsd:choice>
        <xsd:element name="functionBody" type="exprWrapper"/>
        <xsd:element name="externalDefinition" type="emptyContent"/>
      </xsd:choice>
    </xsd:sequence>
    <xsd:attribute name="nondeterministic" use="optional"
                   type="xsd:boolean" default="false"/>
    <xsd:attribute name="private" use="optional"
                   type="xsd:boolean" default="false"/>
  </xsd:complexType>

  <xsd:element name="functionDecl" type="functionDecl"
               substitutionGroup="prologPartTwoItem"/>


  <xsd:complexType name="param">
    <xsd:sequence>
      <xsd:element name="varName" type="QName"/>
      <xsd:element ref="typeDeclaration" minOccurs="0"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="param" type="param"/>


  <xsd:complexType name="paramList">
    <xsd:sequence>
      <xsd:element ref="param" minOccurs="0" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="paramList" type="paramList"/>


</xsd:schema>

5 Conformance

This section defines the conformance criteria for an XQueryX processor (see Figure 1, "Processing Model Overview", in [XQuery 3.0: An XML Query Language] , Section Processing ModelXQ30.

In this section, the following terms are used to indicate the requirement levels defined in [RFC 2119]. [Definition: MUST means that the item is an absolute requirement of the specification.] [Definition: SHOULD means that there may exist valid reasons in particular circumstances to ignore a particular item, but the full implications must be understood and carefully weighed before choosing a different course.] [Definition: MAY means that an item is truly optional.]

An XQueryX processor that claims to conform to this specification MUST implement the XQueryX syntax as defined in 4 An XML Schema for the XQuery XML Syntax of this specification and include a claim of Minimal Conformance as defined in [XQuery 3.0: An XML Query Language] , Section Minimal ConformanceXQ30. In addition to a claim of Minimal Conformance, it MAY claim conformance to one or more optional features defined in [XQuery 3.0: An XML Query Language] , Section Optional FeaturesXQ30.

A References

XQuery 3.0 Requirements
XQuery 3.0 Requirements, Daniel Engovatov, Jonathan Robie, Editors. World Wide Web Consortium, 16 September 2010. This version is http://www.w3.org/TR/2010/WD-xquery-30-requirements-20100916/. The latest version is available at http://www.w3.org/TR/xquery-30-requirements/.
XQuery 3.0: An XML Query Language
XQuery 3.0: An XML Query Language, Jonathan Robie, Don Chamberlin, Michael Dyck, John Snelson, Editors. World Wide Web Consortium, 14 December 2010. This version is http://www.w3.org/TR/2010/WD-xquery-30-20101214/. The latest version is available at http://www.w3.org/TR/xquery-30/.
XQuery 3.0 Use Cases
XQuery 3.0 Use Cases, Tim Kraska, Editor. World Wide Web Consortium, 14 December 2010. This version is http://www.w3.org/TR/2010/WD-xquery-30-use-cases-20101214/. The latest version is available at http://www.w3.org/TR/xquery-30-use-cases/.
XQuery 1.0 and XPath 2.0 Formal Semantics
XQuery 1.0 and XPath 2.0 Formal Semantics (Second Edition), Jérôme Siméon, Denise Draper, Peter Frankhauser, et. al., Editors. World Wide Web Consortium, 23 January 2007. This version is http://www.w3.org/TR/2007/REC-xquery-semantics-20070123/. The latest version is available at http://www.w3.org/TR/xquery-semantics/.
XML Syntax for XQuery 3.0 (XQueryX)
XQueryX 3.0, Jim Melton, Editor. World Wide Web Consortium, 14 December 2010. This version is http://www.w3.org/TR/2010/WD-xqueryx-30-20101214/. The latest version is available at http://www.w3.org/TR/xqueryx-30/.
RFC 2119
S. Bradner. Key Words for use in RFCs to Indicate Requirement Levels. IETF RFC 2119. See http://www.ietf.org/rfc/rfc2119.txt.
RFC 3023
M. Murata, S. St. Laurent, and D. Kohn. XML Media Types IETF RFC 3023 or its successors. See http://www.ietf.org/rfc/rfc3023.txt.

B Transforming XQueryX to XQuery

The following stylesheet converts from XQueryX syntax to XML Query syntax. Note the intent of the stylesheet is to produce a valid XQuery with the same semantics (see [XQuery 1.0 and XPath 2.0 Formal Semantics]) as the input XQueryX.

<?xml version="1.0"?>
<!--  ================================================================================  -->
<!--  Changes from Recommendation (edition 1):                                          -->
<!--  * In XSLT stylesheet, deleted template for xqx:parenthesizedExpr (bug #4963)      -->
<!--  * In XSLT stylesheet, corrected template for xqx:namespaceDeclaration (bug #5343) -->
<!--  Changes from Recommendation (edition 2):                                          -->
<!--  * Added support for new Windowing clause in FLWOR expression                      -->
<!--  * Added support for new Group By Clause in FLWOR expression                       -->
<!--  * Added support for new Count Clause in FLWOR expression                          -->
<!--  * Added support for keyword "outer" on for expression                             -->
<!--  * Modified structure of FLWOR clause per "simplified FLWOR expressions"           -->
<!--  * Modified validation syntax per Bugzilla Bug 5472                                -->
<!--  * Modified function declaration so that external functions can be nondeterminstic -->
<!--  * Modified variable declaration so external variables can have an initial value   -->
<!--  * Added support for new try-catch expression                                      -->
<!--  * Made changes triggered by Bugzilla Bugs 6309, 6310, and 6311                    -->
<!--  * Modified errlist syntax per Bugzilla Bug 7053                                   -->
<!--  * Added support for public/private functions                                      -->
<!--  * Replaced "outer for" support with support for "allowing empty"                  -->
<!--  * Added support for higher-order functions                                        -->
<!--  * Added support for value-based "switch" expression                               -->
<!--  * Changed functionItemExpr child element QName to be functionName for consistency -->
<!--  ================================================================================  -->
<!--  Errata applied:                                                                   -->
<!--    XQX.E3  - Editorial (Bugzilla Bug 4963)                                         -->
<!--    XQX.E5  - Editorial (Bugzilla Bug 5343)                                         -->
<!--    XQX.E9  - Minor technical (Bugzilla Bug 6733)                                   -->
<!--  ================================================================================  -->
<!--  Modifications:                                                                    -->
<!--    2008-07-30 - Add XQuery 1.1 grouping and windowing support                      -->
<!--    2008-09-18 - Add XQuery 1.1 count and outer-for support, simplified FLWOR       -->
<!--    2008-09-27 - Add validation type, nondeterministic function declarations,       -->
<!--                 initial values for external variables, try-catch expressions       -->
<!--    2008-11-14 - Add decimal formatting decl, encoding for version decl,            -->
<!--                 context item decl, computed namespace constructor                  -->
<!--    2008-11-25 - Add support for fixes for validate expression, and change to allow -->
<!--                 the count clause to only be an intermediate expression             -->
<!--    2009-01-13 - Bugs 6309 and 6310 (fixes to details of certain windowing clauses  -->
<!--    2009-03-03 - tumblingWindowClause syntax now matches slidingWindowClause syntax -->
<!--    2009-09-06 - Modified errlist syntax per Bugzilla Bug 7053                      -->
<!--    2009-10-09 - Added support for private/public functions                         -->
<!--                 Replace "outer for" with "allowing empty"                          -->
<!--    2009-10-22 - Add support for higher-order functions & switch expression         -->
<!--    2010-01-06 - Omit parens when following-sibling of rootExpr is stepExpr         -->
<!--    2010-04-06 - Changed functionItemExpr child QName -> functionName (consistency) -->
<!--    2010-06-23 - Added support for partial function application                     -->
<!--  ================================================================================  -->
<xsl:stylesheet version="1.0"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:xqx="http://www.w3.org/2005/XQueryX">

<!-- Note that this stylesheet frequently invokes templates for
     specified elements, even when there are no templates in the
     stylesheet whose match="" attribute identifies those elements.
     In such case, the default template's element matching template
     is invoked, which merely invokes xsl:apply-templates -->

  <xsl:output method="text"/>
  <xsl:strip-space elements="*"/>
  <xsl:preserve-space elements="xqx:value xqx:attributeValue xqx:pragmaContents
                                xqx:optionContents xqx:xquery"/>

  <xsl:variable name="DOT" select="'.'"/>
  <xsl:variable name="SPACE" select="' '"/>
  <xsl:variable name="SLASH" select="'/'"/>
  <xsl:variable name="SLASH_SLASH" select="'//'"/>
  <xsl:variable name="LESSTHAN" select="'&lt;'"/>
  <xsl:variable name="GREATERTHAN" select="'&gt;'"/>
  <xsl:variable name="LPAREN" select="'('"/>
  <xsl:variable name="RPAREN" select="')'"/>
  <xsl:variable name="NEWLINE"><xsl:text>
</xsl:text></xsl:variable>
  <xsl:variable name="COMMA" select="','"/>
  <xsl:variable name="COMMA_SPACE" select="', '"/>
  <xsl:variable name="COMMA_NEWLINE"><xsl:text>,
</xsl:text></xsl:variable>
  <xsl:variable name="QUOTE"><xsl:text>'</xsl:text></xsl:variable>
  <xsl:variable name="DOUBLEQUOTE"><xsl:text>"</xsl:text></xsl:variable>
  <xsl:variable name="TO" select="' to '"/>
  <xsl:variable name="LBRACE" select="'{'"/>
  <xsl:variable name="RBRACE" select="'}'"/>
  <xsl:variable name="LBRACKET" select="'['"/>
  <xsl:variable name="RBRACKET" select="']'"/>
  <xsl:variable name="DOLLAR" select="'$'"/>
  <xsl:variable name="MINUS" select="'-'"/>
  <xsl:variable name="PLUS" select="'+'"/>
  <xsl:variable name="EQUAL" select="'='"/>
  <xsl:variable name="COLON" select="':'"/>
  <xsl:variable name="DOUBLE_COLON" select="'::'"/>
  <xsl:variable name="SEMICOLON" select="';'"/>
  <xsl:variable name="AT" select="'@'"/>
  <xsl:variable name="STAR" select="'*'"/>
  <xsl:variable name="QUESTIONMARK" select="'?'"/>
  <xsl:variable name="PERCENT" select="'%'"/>
  <xsl:variable name="ASSIGN" select="':='"/>
  <xsl:variable name="SEPARATOR" select="';'"/>
  <xsl:variable name="PRAGMA_BEGIN" select="'(# '"/>
  <xsl:variable name="PRAGMA_END" select="' #)'"/>


  <xsl:template name="delimitedList">
    <xsl:param name="delimiter" />
    <xsl:param name="leftEncloser"/>
    <xsl:param name="rightEncloser" />
    <xsl:param name="selector"/>

    <xsl:value-of select="$leftEncloser"/>
    <xsl:for-each select="*">
      <xsl:apply-templates select="."/>
      <xsl:if test="not (position()=last())">        
        <xsl:value-of select="$delimiter"/>
      </xsl:if>       
    </xsl:for-each>
    <xsl:value-of select="$rightEncloser"/>
  </xsl:template>   


  <xsl:template name="parenthesizedList">
    <xsl:param name="delimiter" select="$COMMA_SPACE"/>
    <xsl:call-template name="delimitedList">
      <xsl:with-param name="delimiter" select="$delimiter" />
      <xsl:with-param name="leftEncloser" select="$LPAREN"/>
      <xsl:with-param name="rightEncloser" select="$RPAREN"/>
    </xsl:call-template>
  </xsl:template>


  <xsl:template name="commaSeparatedList">
    <xsl:call-template name="delimitedList">
      <xsl:with-param name="delimiter">
        <xsl:value-of select="$COMMA_SPACE"/>
      </xsl:with-param>
    </xsl:call-template>
  </xsl:template>


  <!-- To resolve Bugzilla bug #3446, we now escape CR (#xD), NEL (#x85),
       and LINE SEPARATOR (#x2028) characters in text nodes and attribute values.
         Note that this template is invoked for a number of other purposes (e.g.,
       xqx:collation, xqx:namespaceDeclaration) where the presence of such
       characters would be invalid and thus are highly unlikely to appear. 
       If they do, then this template will happily escape them, deferring the
       error until the resulting XQuery expression is processed. -->
  <xsl:template name="quote">
    <xsl:param name="item"/>
    <xsl:value-of select="$DOUBLEQUOTE"/>
    <xsl:call-template name="globalReplace">
      <xsl:with-param name="stringToBeFixed">
        <xsl:call-template name="globalReplace">
          <xsl:with-param name="stringToBeFixed">
            <xsl:call-template name="globalReplace">
              <xsl:with-param name="stringToBeFixed">
                <xsl:call-template name="globalReplace">
                  <xsl:with-param name="stringToBeFixed">
                    <xsl:call-template name="globalReplace">
                      <xsl:with-param name="stringToBeFixed">
                        <xsl:call-template name="globalReplace">
                          <xsl:with-param name="stringToBeFixed">
                            <xsl:value-of select="$item"/>
                          </xsl:with-param>
                          <xsl:with-param name="toBeReplaced">&amp;</xsl:with-param>
                          <xsl:with-param name="replacement">&amp;amp;</xsl:with-param>
                        </xsl:call-template>
                                      </xsl:with-param>
                      <xsl:with-param name="toBeReplaced">&lt;</xsl:with-param>
                      <xsl:with-param name="replacement">&amp;lt;</xsl:with-param>
                    </xsl:call-template>
                  </xsl:with-param>
                  <xsl:with-param name="toBeReplaced" select="'&#x85;'"/>
                  <xsl:with-param name="replacement">&amp;#x85;</xsl:with-param>
                </xsl:call-template>
              </xsl:with-param>
              <xsl:with-param name="toBeReplaced" select="'&#xD;'"/>
              <xsl:with-param name="replacement">&amp;#xD;</xsl:with-param>
            </xsl:call-template>
          </xsl:with-param>
          <xsl:with-param name="toBeReplaced" select="'&#x2028;'"/>
          <xsl:with-param name="replacement">&amp;#x2028;</xsl:with-param>
        </xsl:call-template>
      </xsl:with-param>
      <xsl:with-param name="toBeReplaced"><xsl:text>"</xsl:text></xsl:with-param>
      <xsl:with-param name="replacement"><xsl:text>""</xsl:text></xsl:with-param>
    </xsl:call-template>
    <xsl:value-of select="$DOUBLEQUOTE"/>
  </xsl:template>


  <xsl:template name="globalReplace">
    <xsl:param name="stringToBeFixed"/>
    <xsl:param name="toBeReplaced"/>
    <xsl:param name="replacement"/>
    <xsl:choose>
      <xsl:when test="contains($stringToBeFixed, $toBeReplaced)">
        <xsl:value-of select="concat(substring-before($stringToBeFixed, $toBeReplaced), $replacement)"/>
        <xsl:call-template name="globalReplace">
          <xsl:with-param name="stringToBeFixed" select="substring-after($stringToBeFixed, $toBeReplaced)"/>
          <xsl:with-param name="toBeReplaced" select="$toBeReplaced"/>
          <xsl:with-param name="replacement" select="$replacement"/>
        </xsl:call-template>
      </xsl:when>
      <xsl:otherwise>
        <xsl:value-of select="$stringToBeFixed"/>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:template>

<!-- ????                       xqx:catchErrorCode | xqx:catchErrorDesc | xqx:catchErrorVal | -->
  <xsl:template name="renderQName"
                match="xqx:QName | xqx:pragmaName | xqx:typeName | xqx:varName |
                       xqx:functionName | xqx:optionName | xqx:annotationName |
                       xqx:atomicType | xqx:tagName">
    <xsl:if test="@xqx:prefix">
      <xsl:value-of select="@xqx:prefix"/>
      <xsl:value-of select="$COLON"/>
    </xsl:if>
    <xsl:value-of select="."/>
  </xsl:template>


  <xsl:template match="xqx:attributeName">
    <xsl:choose>
      <xsl:when test="@xqx:prefix='xmlns'">
        <xsl:message terminate="yes">Incorrect XQueryX: Attribute names are not permitted to have prefix 'xmlns'; use xqx:namespaceDeclaration to declare namespaces</xsl:message>
      </xsl:when>
      <xsl:when test="@xqx:prefix">
        <xsl:value-of select="@xqx:prefix"/>
        <xsl:value-of select="$COLON"/>
        <xsl:value-of select="."/>
      </xsl:when>
      <xsl:when test=". = 'xmlns'">
        <xsl:message terminate="yes">Incorrect XQueryX: Attribute names are not permitted to be 'xmlns'; use xqx:namespaceDeclaration to declare namespaces</xsl:message>
      </xsl:when>
      <xsl:otherwise>
        <xsl:value-of select="."/>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:template>


  <xsl:template match="xqx:NCName">
    <xsl:value-of select="."/>
  </xsl:template>


  <xsl:template match="xqx:rootExpr">
    <xsl:value-of select="$SLASH"/>
  </xsl:template>


<!-- 2010-06-23 - Added support for partial function application                        -->
  <xsl:template match="xqx:argumentPlaceholder">
    <xsl:value-of select="$QUESTIONMARK"/>
  </xsl:template>


  <!-- To resolve Bugzilla bug #6733, we now treat a
       rootExpr child of pathExpr distinctly from a
       rootExpr that occurs in other contexts,
       transforming it to "(/)" as proper
       XQuery grammar.  There is an additional consideration
       on this: If the immediately following sibling of
       rootExpr is a stepExpr, then the parens must be
       omitted. -->
  <xsl:template match="xqx:pathExpr/xqx:rootExpr">
    <xsl:if test="not(following-sibling::xqx:stepExpr)">
      <xsl:value-of select="$LPAREN"/>
    </xsl:if>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$SLASH"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:if test="not(following-sibling::xqx:stepExpr)">
      <xsl:value-of select="$RPAREN"/>
    </xsl:if>
  </xsl:template>


  <xsl:template match="xqx:contextItemExpr">
    <xsl:value-of select="$DOT"/>
  </xsl:template>


  <xsl:template match="xqx:stringConstantExpr">
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="xqx:value"/>
    </xsl:call-template>
  </xsl:template>


  <xsl:template match="xqx:integerConstantExpr |
                       xqx:decimalConstantExpr |
                       xqx:doubleConstantExpr">
    <xsl:value-of select="xqx:value"/>
  </xsl:template>


  <xsl:template match="xqx:varRef">
    <xsl:value-of select="$DOLLAR"/>
    <xsl:if test="xqx:name/@xqx:prefix">
      <xsl:value-of select="xqx:name/@xqx:prefix"/>
      <xsl:value-of select="$COLON"/>
    </xsl:if>
    <xsl:value-of select="xqx:name"/>
  </xsl:template>


  <xsl:template match="xqx:pragma">
    <xsl:value-of select="$PRAGMA_BEGIN"/>
    <xsl:apply-templates select="xqx:pragmaName"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="xqx:pragmaContents"/>
    <xsl:value-of select="$PRAGMA_END"/>
  </xsl:template>


  <xsl:template match="xqx:extensionExpr">
    <xsl:apply-templates select="xqx:pragma"/>
    <xsl:value-of select="$LBRACE"/>
    <xsl:apply-templates select="xqx:argExpr"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>

<!-- Response to Bugzilla bug #2528 -->
  <xsl:template match="xqx:functionCallExpr">
    <xsl:choose>
      <xsl:when test="xqx:functionName/@xqx:prefix">
        <xsl:value-of select="xqx:functionName/@xqx:prefix"/>
        <xsl:value-of select="$COLON"/>
      </xsl:when>
      <xsl:otherwise>
        <xsl:if test="xqx:functionName = 'node' or
                      xqx:functionName = 'document-node' or
                      xqx:functionName = 'element' or
                      xqx:functionName = 'attribute' or
                      xqx:functionName = 'schema-element' or
                      xqx:functionName = 'schema-attribute' or
                      xqx:functionName = 'processing-instruction' or
                      xqx:functionName = 'comment' or
                      xqx:functionName = 'text' or
                      xqx:functionName = 'function' or
                      xqx:functionName = 'namespace-node' or
                      xqx:functionName = 'item' or
                      xqx:functionName = 'if' or
                      xqx:functionName = 'switch' or
                      xqx:functionName = 'typeswitch' or
                      xqx:functionName = 'empty-sequence'">
          <xsl:variable name="message"><xsl:text>Incorrect XQueryX: function calls must not use unqualified "reserved" name "</xsl:text><xsl:value-of select="xqx:functionName"/><xsl:text>"</xsl:text></xsl:variable>
          <xsl:message terminate="yes"><xsl:value-of select="$message"/></xsl:message>
        </xsl:if>
      </xsl:otherwise>
    </xsl:choose>
    <xsl:value-of select="xqx:functionName"/>
    <xsl:choose>
      <xsl:when test="xqx:arguments">
        <xsl:for-each select="xqx:arguments">
          <xsl:call-template name="parenthesizedList"/>
        </xsl:for-each>
      </xsl:when>
      <xsl:otherwise>
        <xsl:value-of select="$LPAREN"/>
        <xsl:value-of select="$RPAREN"/>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:template>


  <xsl:template match="xqx:constructorFunctionExpr">
    <xsl:apply-templates select="xqx:typeName"/>
    <xsl:for-each select="xqx:argExpr">
      <xsl:call-template name="parenthesizedList"/>
    </xsl:for-each>
  </xsl:template>


  <xsl:template match="xqx:unaryMinusOp | xqx:unaryPlusOp">
    <xsl:value-of select="$LPAREN"/>
     <xsl:choose>
       <xsl:when test="self::xqx:unaryPlusOp"><xsl:value-of select="$PLUS"/></xsl:when>
       <xsl:when test="self::xqx:unaryMinusOp"><xsl:value-of select="$MINUS"/></xsl:when>
     </xsl:choose>
    <xsl:apply-templates select="xqx:operand"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:addOp | xqx:subtractOp | xqx:multiplyOp
                     | xqx:divOp | xqx:idivOp | xqx:modOp">
    <xsl:value-of select="$LPAREN"/>
     <xsl:apply-templates select="xqx:firstOperand"/>
     <xsl:choose>
       <xsl:when test="self::xqx:addOp"><xsl:value-of select="$PLUS"/></xsl:when>
       <xsl:when test="self::xqx:subtractOp"><xsl:text> </xsl:text><xsl:value-of select="$MINUS"/><xsl:text> </xsl:text></xsl:when>
       <xsl:when test="self::xqx:multiplyOp"><xsl:value-of select="$STAR"/></xsl:when>
       <xsl:when test="self::xqx:divOp"><xsl:text> div </xsl:text></xsl:when>
       <xsl:when test="self::xqx:idivOp"><xsl:text> idiv </xsl:text></xsl:when>
       <xsl:when test="self::xqx:modOp"><xsl:text> mod </xsl:text></xsl:when>
     </xsl:choose>
    <xsl:apply-templates select="xqx:secondOperand"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:eqOp | xqx:neOp | xqx:ltOp
                     | xqx:gtOp | xqx:leOp | xqx:geOp">
    <xsl:value-of select="$LPAREN"/>
     <xsl:apply-templates select="xqx:firstOperand"/>
     <xsl:choose>
       <xsl:when test="self::xqx:eqOp"><xsl:text> eq </xsl:text></xsl:when>
       <xsl:when test="self::xqx:neOp"><xsl:text> ne </xsl:text></xsl:when>
       <xsl:when test="self::xqx:ltOp"><xsl:text> lt </xsl:text></xsl:when>
       <xsl:when test="self::xqx:gtOp"><xsl:text> gt </xsl:text></xsl:when>
       <xsl:when test="self::xqx:leOp"><xsl:text> le </xsl:text></xsl:when>
       <xsl:when test="self::xqx:geOp"><xsl:text> ge </xsl:text></xsl:when>
     </xsl:choose>
    <xsl:apply-templates select="xqx:secondOperand"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:equalOp | xqx:notEqualOp | xqx:lessThanOp
                     | xqx:greaterThanOp | xqx:lessThanOrEqualOp | xqx:greaterThanOrEqualOp">
    <xsl:value-of select="$LPAREN"/>
     <xsl:apply-templates select="xqx:firstOperand"/>
     <xsl:choose>
       <xsl:when test="self::xqx:equalOp">
         <xsl:text> </xsl:text><xsl:value-of select="$EQUAL"/><xsl:text> </xsl:text>
       </xsl:when>
       <xsl:when test="self::xqx:notEqualOp">
         <xsl:text> !</xsl:text><xsl:value-of select="$EQUAL"/><xsl:text> </xsl:text>
       </xsl:when>
       <xsl:when test="self::xqx:lessThanOp">
         <xsl:text> </xsl:text><xsl:value-of select="$LESSTHAN"/><xsl:text> </xsl:text>
       </xsl:when>
       <xsl:when test="self::xqx:greaterThanOp">
         <xsl:text> </xsl:text><xsl:value-of select="$GREATERTHAN"/><xsl:text> </xsl:text>
       </xsl:when>
       <xsl:when test="self::xqx:lessThanOrEqualOp">
         <xsl:text> </xsl:text><xsl:value-of select="$LESSTHAN"/>
         <xsl:value-of select="$EQUAL"/><xsl:text> </xsl:text>
       </xsl:when>
       <xsl:when test="self::xqx:greaterThanOrEqualOp">
         <xsl:text> </xsl:text><xsl:value-of select="$GREATERTHAN"/>
         <xsl:value-of select="$EQUAL"/><xsl:text> </xsl:text>
       </xsl:when>
     </xsl:choose>
    <xsl:apply-templates select="xqx:secondOperand"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:isOp | xqx:nodeBeforeOp | xqx:nodeAfterOp">
    <xsl:value-of select="$LPAREN"/>
     <xsl:apply-templates select="xqx:firstOperand"/>
     <xsl:choose>
       <xsl:when test="self::xqx:isOp"><xsl:text> is </xsl:text></xsl:when>
       <xsl:when test="self::xqx:nodeBeforeOp"><xsl:text> </xsl:text>
         <xsl:value-of select="$LESSTHAN"/><xsl:value-of select="$LESSTHAN"/>
         <xsl:text> </xsl:text></xsl:when>
       <xsl:when test="self::xqx:nodeAfterOp"><xsl:text> </xsl:text>
         <xsl:value-of select="$GREATERTHAN"/><xsl:value-of select="$GREATERTHAN"/>
         <xsl:text> </xsl:text></xsl:when>
     </xsl:choose>
    <xsl:apply-templates select="xqx:secondOperand"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:andOp | xqx:orOp">
    <xsl:value-of select="$LPAREN"/>
     <xsl:apply-templates select="xqx:firstOperand"/>
     <xsl:choose>
       <xsl:when test="self::xqx:andOp"><xsl:text> and </xsl:text></xsl:when>
       <xsl:when test="self::xqx:orOp"><xsl:text> or </xsl:text></xsl:when>
     </xsl:choose>
    <xsl:apply-templates select="xqx:secondOperand"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:unionOp | xqx:intersectOp | xqx:exceptOp">
    <xsl:value-of select="$LPAREN"/>
     <xsl:apply-templates select="xqx:firstOperand"/>
     <xsl:choose>
       <xsl:when test="self::xqx:unionOp"><xsl:text> union </xsl:text></xsl:when>
       <xsl:when test="self::xqx:intersectOp"><xsl:text> intersect </xsl:text></xsl:when>
       <xsl:when test="self::xqx:exceptOp"><xsl:text> except </xsl:text></xsl:when>
     </xsl:choose>
    <xsl:apply-templates select="xqx:secondOperand"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:sequenceExpr">
    <xsl:for-each select=".">
      <xsl:call-template name="parenthesizedList">
        <xsl:with-param name="delimiter" select="$COMMA_NEWLINE"/>
      </xsl:call-template>
    </xsl:for-each>
  </xsl:template>


  <xsl:template match="xqx:rangeSequenceExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="xqx:startExpr"/>
    <xsl:value-of select="$TO"/>
    <xsl:apply-templates select="xqx:endExpr"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:forClause">
    <xsl:text> for </xsl:text>
    <xsl:call-template name="commaSeparatedList"/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>

  <xsl:template match="xqx:forClauseItem">
    <xsl:apply-templates/>
  </xsl:template>

  <xsl:template match="xqx:allowingEmpty">
    <xsl:text> allowing empty </xsl:text>
  </xsl:template>

  <xsl:template match="xqx:forExpr">
    <xsl:value-of select="$NEWLINE"/>
    <xsl:text>    in </xsl:text>
        <xsl:apply-templates/>
  </xsl:template>


  <xsl:template match="xqx:letClause">
    <xsl:text> let </xsl:text>
    <xsl:call-template name="commaSeparatedList"/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>

  <xsl:template match="xqx:letClauseItem">
    <xsl:apply-templates/>
  </xsl:template>

  <xsl:template match="xqx:letExpr">
    <xsl:value-of select="$ASSIGN"/>
    <xsl:apply-templates/>
  </xsl:template>


  <xsl:template match="xqx:windowClause">
    <xsl:text> for </xsl:text>
    <xsl:apply-templates/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>

  <xsl:template match="xqx:tumblingWindowClause">
    <xsl:text>   tumbling window </xsl:text>
    <xsl:apply-templates select="xqx:typedVariableBinding"/>
    <xsl:text> in </xsl:text>
    <xsl:apply-templates select="xqx:bindingSequence"/>
    <xsl:value-of select="$NEWLINE"/>
    <xsl:text>      </xsl:text>
    <xsl:apply-templates select="xqx:windowStartCondition"/>
    <xsl:value-of select="$NEWLINE"/>
    <xsl:text>      </xsl:text>
    <xsl:apply-templates select="xqx:windowEndCondition"/>
  </xsl:template>

  <xsl:template match="xqx:slidingWindowClause">
    <xsl:text>   sliding window </xsl:text>
    <xsl:apply-templates select="xqx:typedVariableBinding"/>
    <xsl:text> in </xsl:text>
    <xsl:apply-templates select="xqx:bindingSequence"/>
    <xsl:value-of select="$NEWLINE"/>
    <xsl:text>      </xsl:text>
    <xsl:apply-templates select="xqx:windowStartCondition"/>
    <xsl:value-of select="$NEWLINE"/>
    <xsl:text>      </xsl:text>
    <xsl:apply-templates select="xqx:windowEndCondition"/>
  </xsl:template>

  <xsl:template match="xqx:bindingSequence">
    <xsl:apply-templates/>
  </xsl:template>

  <xsl:template match="xqx:windowStartCondition">
    <xsl:text>start </xsl:text>
    <xsl:apply-templates select="xqx:windowVars"/>
    <xsl:text> when </xsl:text>
    <xsl:apply-templates select="xqx:winStartExpr"/>
  </xsl:template>

  <xsl:template match="xqx:windowEndCondition">
    <xsl:if test="@onlyEnd='true'">
      <xsl:text>only </xsl:text>
    </xsl:if>
    <xsl:text>end </xsl:text>
    <xsl:apply-templates select="xqx:windowVars"/>
    <xsl:text> when </xsl:text>
    <xsl:apply-templates select="xqx:winEndExpr"/>
  </xsl:template>

  <xsl:template match="xqx:windowVars">
    <xsl:apply-templates select="xqx:currentItem"/>
    <xsl:apply-templates select="xqx:positionalVariableBinding"/>
    <xsl:apply-templates select="xqx:previousItem"/>
    <xsl:apply-templates select="xqx:nextItem"/>
  </xsl:template>

  <xsl:template match="xqx:currentItem">
    <xsl:value-of select="$DOLLAR"/>
    <xsl:call-template name="renderQName"/>
  </xsl:template>

  <xsl:template match="xqx:previousItem">
    <xsl:text> previous </xsl:text>
    <xsl:value-of select="$DOLLAR"/>
    <xsl:call-template name="renderQName"/>
  </xsl:template>

  <xsl:template match="xqx:nextItem">
    <xsl:text> next </xsl:text>
    <xsl:value-of select="$DOLLAR"/>
    <xsl:call-template name="renderQName"/>
  </xsl:template>


  <xsl:template match="xqx:countClause">
    <xsl:text> count </xsl:text>
    <xsl:apply-templates/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>


  <xsl:template match="xqx:whereClause">
    <xsl:text> where </xsl:text>
    <xsl:apply-templates select="*"/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>


  <xsl:template match="xqx:groupByClause">
    <xsl:text>  group by </xsl:text>
    <xsl:call-template name="commaSeparatedList"/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>


  <xsl:template match="xqx:groupingSpec">
    <xsl:value-of select="$DOLLAR"/>
    <xsl:apply-templates/>
  </xsl:template>


  <xsl:template match="xqx:collation">
    <xsl:text> collation </xsl:text>
    <xsl:call-template name="quote">
      <xsl:with-param name="item">
        <xsl:value-of select="."/>
      </xsl:with-param>
    </xsl:call-template>
  </xsl:template>


  <xsl:template match="xqx:emptyOrderingMode">
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="."/>
  </xsl:template>


  <xsl:template match="xqx:orderingKind">
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="."/>
  </xsl:template>


  <xsl:template match="xqx:orderModifier">
    <xsl:apply-templates select="*"/>
  </xsl:template>


  <xsl:template match="xqx:orderBySpec">
    <xsl:apply-templates select="xqx:orderByExpr"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:apply-templates select="xqx:orderModifier"/>
  </xsl:template>


  <xsl:template match="xqx:orderByClause">
    <xsl:if test="xqx:stable">
      <xsl:text> stable</xsl:text>
    </xsl:if>
    <xsl:text> order by </xsl:text>
    <xsl:apply-templates select="xqx:orderBySpec[1]"/>
    <xsl:for-each select="xqx:orderBySpec[position() > 1]">
      <xsl:value-of select="$COMMA_SPACE"/>
      <xsl:apply-templates select="."/>
    </xsl:for-each>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>


  <xsl:template match="xqx:returnClause">
    <xsl:text> return </xsl:text>
    <xsl:apply-templates select="*"/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>


<!-- Surrounding FLWOR expressions with parentheses completes the set -->
  <xsl:template match="xqx:flworExpr">
    <xsl:value-of select="$NEWLINE"/>
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="*"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:ifThenElseExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:text> if </xsl:text>
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="xqx:ifClause"/>
    <xsl:value-of select="$RPAREN"/>
    <xsl:text> then </xsl:text>
    <xsl:apply-templates select="xqx:thenClause"/>
    <xsl:text> else </xsl:text>
    <xsl:apply-templates select="xqx:elseClause"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:positionalVariableBinding">
    <xsl:text> at </xsl:text>
    <xsl:value-of select="$DOLLAR"/>
    <xsl:call-template name="renderQName"/>
  </xsl:template>


  <xsl:template match="xqx:variableBinding">
    <xsl:value-of select="$DOLLAR"/>
    <xsl:call-template name="renderQName"/>
    <xsl:if test="parent::xqx:typeswitchExprCaseClause">
      <xsl:text> as </xsl:text>
    </xsl:if>
  </xsl:template>


  <xsl:template match="xqx:typedVariableBinding" name="typedVariableBinding">
    <xsl:value-of select="$DOLLAR"/>
    <xsl:apply-templates select="xqx:varName"/>
    <xsl:apply-templates select="xqx:typeDeclaration"/>
  </xsl:template>


  <xsl:template match="xqx:quantifiedExprInClause">
    <xsl:apply-templates select="xqx:typedVariableBinding"/>
    <xsl:text> in </xsl:text>
    <xsl:apply-templates select="xqx:sourceExpr"/>
  </xsl:template>


  <xsl:template match="xqx:quantifiedExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:value-of select="xqx:quantifier"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:apply-templates select="xqx:quantifiedExprInClause[1]"/>
    <xsl:for-each select="xqx:quantifiedExprInClause[position() > 1]">
      <xsl:value-of select="$COMMA_SPACE"/>
      <xsl:apply-templates select="."/>
    </xsl:for-each>
    <xsl:text> satisfies </xsl:text>
    <xsl:apply-templates select="xqx:predicateExpr"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:instanceOfExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="xqx:argExpr"/>
    <xsl:text> instance of </xsl:text>
    <xsl:apply-templates select="xqx:sequenceType"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:castExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="xqx:argExpr"/>
    <xsl:text> cast as </xsl:text>
    <xsl:apply-templates select="xqx:singleType"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:castableExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="xqx:argExpr"/>
    <xsl:text> castable as </xsl:text>
    <xsl:apply-templates select="xqx:singleType"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:treatExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="xqx:argExpr"/>
    <xsl:text> treat as </xsl:text>
    <xsl:apply-templates select="xqx:sequenceType"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:switchExprCaseClause">
    <xsl:for-each select="xqx:switchCaseExpr">
      <xsl:value-of select="$NEWLINE"/>
      <xsl:text>   case (</xsl:text>
      <xsl:apply-templates select="."/>
      <xsl:text>) </xsl:text>
    </xsl:for-each>
    <xsl:value-of select="$NEWLINE"/>
    <xsl:text>     return </xsl:text>
    <xsl:apply-templates select="xqx:resultExpr"/>
  </xsl:template>

  <xsl:template match="xqx:switchExprDefaultClause">
    <xsl:value-of select="$NEWLINE"/>
    <xsl:text>   default return </xsl:text>
    <xsl:apply-templates select="xqx:resultExpr"/>
  </xsl:template>


  <xsl:template match="xqx:switchExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:text>switch</xsl:text>
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="xqx:argExpr"/>
    <xsl:value-of select="$RPAREN"/>
    <xsl:apply-templates select="xqx:switchExprCaseClause"/>
    <xsl:apply-templates select="xqx:switchExprDefaultClause"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:typeswitchExprCaseClause">
    <xsl:text> case </xsl:text>
    <xsl:apply-templates select="xqx:variableBinding"/>
    <xsl:apply-templates select="xqx:sequenceType"/>
    <xsl:text> return </xsl:text>
    <xsl:apply-templates select="xqx:resultExpr"/>
  </xsl:template>


  <xsl:template match="xqx:typeswitchExprDefaultClause">
    <xsl:text> default </xsl:text>
    <xsl:apply-templates select="xqx:variableBinding"/>
    <xsl:text> return </xsl:text>
    <xsl:apply-templates select="xqx:resultExpr"/>
  </xsl:template>


  <xsl:template match="xqx:typeswitchExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:text>typeswitch</xsl:text>
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="xqx:argExpr"/>
    <xsl:value-of select="$RPAREN"/>
    <xsl:apply-templates select="xqx:typeswitchExprCaseClause"/>
    <xsl:apply-templates select="xqx:typeswitchExprDefaultClause"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:tryCatchExpr">
    <xsl:value-of select="$NEWLINE"/>
    <xsl:text>try </xsl:text>
    <xsl:apply-templates select="xqx:tryClause"/>
    <xsl:apply-templates select="xqx:catchClause"/>
  </xsl:template>


  <xsl:template match="xqx:tryClause">
    <xsl:value-of select="$LBRACE"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:apply-templates/>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:catchClause">
    <xsl:value-of select="$NEWLINE"/>
    <xsl:text>  catch </xsl:text>
    <xsl:apply-templates select="xqx:catchErrorList"/>
    <xsl:apply-templates select="xqx:catchVars"/>
    <xsl:apply-templates select="xqx:catchExpr"/>
  </xsl:template>


  <xsl:template match="xqx:catchErrorList">
    <xsl:for-each select="xqx:nameTest | xqx:Wildcard">
      <xsl:if test="(position() mod 5) = 0">
        <xsl:value-of select="$NEWLINE"/>
        <xsl:text>      </xsl:text>
      </xsl:if>
      <xsl:if test="position() > 1">
        <xsl:text>| </xsl:text>
      </xsl:if>
      <xsl:apply-templates select="."/>
      <xsl:value-of select="$SPACE"/>
    </xsl:for-each>
  </xsl:template>


  <xsl:template match="xqx:catchVars">
    <xsl:value-of select="$NEWLINE"/>
    <xsl:value-of select="$LPAREN"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:apply-templates select="xqx:catchErrorCode"/>
    <xsl:apply-templates select="xqx:catchErrorDesc"/>
    <xsl:apply-templates select="xqx:catchErrorVal"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:catchErrorCode">
    <xsl:apply-templates/>
  </xsl:template>


  <xsl:template match="xqx:catchErrorDesc">
    <xsl:value-of select="$COMMA_SPACE"/>
    <xsl:apply-templates/>
  </xsl:template>


  <xsl:template match="xqx:catchErrorVal">
    <xsl:value-of select="$COMMA_SPACE"/>
    <xsl:apply-templates/>
  </xsl:template>


  <xsl:template match="xqx:catchExpr">
    <xsl:value-of select="$NEWLINE"/>
    <xsl:value-of select="$LBRACE"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:apply-templates/>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:validateExpr">
    <xsl:value-of select="$LPAREN"/>
    <xsl:text> validate </xsl:text>
    <xsl:if test="xqx:validationMode">
      <xsl:value-of select="xqx:validationMode"/>
      <xsl:value-of select="$SPACE"/>
    </xsl:if>
    <xsl:if test="xqx:sequenceType">
      <xsl:text>as </xsl:text>
      <xsl:value-of select="xqx:sequenceType"/>
      <xsl:value-of select="$SPACE"/>
    </xsl:if>
    <xsl:value-of select="$LBRACE"/>
    <xsl:apply-templates select="xqx:argExpr"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$RBRACE"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:xpathAxis">
    <xsl:value-of select="."/>
    <xsl:value-of select="$DOUBLE_COLON"/>
  </xsl:template>


  <xsl:template match="xqx:predicates">
    <xsl:for-each select="*">
      <xsl:value-of select="$LBRACKET"/>
      <xsl:apply-templates select="."/>
      <xsl:value-of select="$RBRACKET"/>
    </xsl:for-each>
  </xsl:template>


  <!-- part of higher-order functions -->
  <xsl:template match="xqx:dynamicFunctionInvocationExpr">
    <xsl:apply-templates select="xqx:functionItem"/>
    <xsl:apply-templates select="xqx:predicates"/>
    <xsl:choose>
      <xsl:when test="xqx:arguments">
        <xsl:for-each select="xqx:arguments">
          <xsl:call-template name="parenthesizedList"/>
        </xsl:for-each>
      </xsl:when>
      <xsl:otherwise>
        <xsl:value-of select="$LPAREN"/>
        <xsl:value-of select="$RPAREN"/>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:template>


  <!-- part of higher-order functions -->
  <xsl:template match="xqx:functionItem">
    <xsl:apply-templates/>
  </xsl:template>


  <xsl:template match="xqx:star">
    <xsl:value-of select="$STAR"/>
  </xsl:template>


  <xsl:template match="xqx:Wildcard[*]">
    <xsl:apply-templates select="*[1]"/>
    <xsl:if test="*[2]">
      <xsl:value-of select="$COLON"/>
      <xsl:apply-templates select="*[2]"/>
    </xsl:if>
  </xsl:template>


  <xsl:template match="xqx:Wildcard[not(*)]">
    <xsl:value-of select="$STAR"/>
  </xsl:template>


  <xsl:template name="simpleWildcard" match="xqx:simpleWildcard">
    <xsl:apply-templates select="xqx:star"/>
    <xsl:apply-templates select="xqx:QName"/>
  </xsl:template>


  <xsl:template match="xqx:textTest">
    <xsl:text>text()</xsl:text>
  </xsl:template>


  <xsl:template match="xqx:commentTest">
    <xsl:text>comment()</xsl:text>
  </xsl:template>


  <xsl:template match="xqx:namespaceTest">
    <xsl:text>namespace-node()</xsl:text>
  </xsl:template>


  <xsl:template match="xqx:anyKindTest">
    <xsl:text>node()</xsl:text>
  </xsl:template>


  <xsl:template match="xqx:piTest">
    <xsl:text>processing-instruction</xsl:text>
    <xsl:value-of select="$LPAREN"/>
    <xsl:value-of select="*"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:documentTest">
    <xsl:text>document-node</xsl:text>
    <xsl:value-of select="$LPAREN"/>
    <xsl:apply-templates select="*"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>

<!-- // THIS IS WRONG!! A nameText is a QName *OR* a Wildcard!!! -->
  <xsl:template match="xqx:nameTest">
    <xsl:call-template name="renderQName"/>
  </xsl:template>


  <xsl:template match="xqx:attributeTest">
    <xsl:text>attribute</xsl:text>
    <xsl:value-of select="$LPAREN"/>
    <xsl:for-each select="xqx:attributeName">
      <xsl:call-template name="simpleWildcard"/>
    </xsl:for-each>
    <xsl:if test="xqx:typeName">
      <xsl:value-of select="$COMMA"/>
      <xsl:apply-templates select="xqx:typeName"/>
    </xsl:if>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:elementTest">
    <xsl:text>element</xsl:text>
    <xsl:value-of select="$LPAREN"/>
    <xsl:for-each select="xqx:elementName">
      <xsl:call-template name="simpleWildcard"/>
    </xsl:for-each>
    <xsl:if test="xqx:typeName">
      <xsl:value-of select="$COMMA"/>
      <xsl:apply-templates select="xqx:typeName"/>
    </xsl:if>
    <xsl:if test="xqx:nillable">
      <xsl:value-of select="$QUESTIONMARK"/>
    </xsl:if>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:schemaElementTest">
    <xsl:text>schema-element</xsl:text>
    <xsl:value-of select="$LPAREN"/>
    <xsl:call-template name="renderQName"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <xsl:template match="xqx:schemaAttributeTest">
    <xsl:text>schema-attribute</xsl:text>
    <xsl:value-of select="$LPAREN"/>
    <xsl:call-template name="renderQName"/>
    <xsl:value-of select="$RPAREN"/>
  </xsl:template>


  <!-- anyFunctionTest, part of higher-order functions -->
  <xsl:template match="xqx:anyFunctionTest">
    <xsl:text> function(*)</xsl:text>
  </xsl:template>


  <!-- typedFunctionTest, part of higher-order functions -->
  <xsl:template match="xqx:typedFunctionTest">
    <xsl:text> function</xsl:text>
    <xsl:apply-templates select="xqx:paramTypeList"/>
    <xsl:text> as </xsl:text>
    <xsl:apply-templates select="xqx:sequenceType"/>
  </xsl:template>


  <xsl:template match="xqx:paramTypeList">
    <xsl:call-template name="parenthesizedList"/>
  </xsl:template>


  <!-- parenthesizedItemType, part of higher-order functions -->
  <xsl:template match="xqx:parenthesizedItemType">
    <xsl:text> ( </xsl:text>
    <xsl:apply-templates/>
    <xsl:text> ) </xsl:text>
  </xsl:template>


  <!-- rewrote test expression per Bugzilla Bug #2523 -->
  <xsl:template match="xqx:stepExpr">
    <xsl:if test="preceding-sibling::xqx:stepExpr">
      <xsl:value-of select="$SLASH"/>
    </xsl:if>
    <xsl:apply-templates select="*"/>
  </xsl:template>


  <!-- deleted xqx:parenthesizedExpr per Bugzilla Bug #4963 -->
  <xsl:template match="xqx:filterExpr">
    <xsl:apply-templates/>
  </xsl:template>


  <!-- part of higher-order functions -->
  <xsl:template match="xqx:literalFunctionItemExpr">
    <xsl:choose>
      <xsl:when test="xqx:functionName/@xqx:prefix">
        <xsl:value-of select="xqx:functionName/@xqx:prefix"/>
        <xsl:value-of select="$COLON"/>
      </xsl:when>
      <xsl:otherwise>
        <xsl:if test="xqx:functionName = 'node' or
                      xqx:functionName = 'document-node' or
                      xqx:functionName = 'element' or
                      xqx:functionName = 'attribute' or
                      xqx:functionName = 'schema-element' or
                      xqx:functionName = 'schema-attribute' or
                      xqx:functionName = 'processing-instruction' or
                      xqx:functionName = 'comment' or
                      xqx:functionName = 'text' or
                      xqx:functionName = 'function' or
                      xqx:functionName = 'namespace-node' or
                      xqx:functionName = 'item' or
                      xqx:functionName = 'if' or
                      xqx:functionName = 'switch' or
                      xqx:functionName = 'typeswitch' or
                      xqx:functionName = 'empty-sequence'">
          <xsl:variable name="message"><xsl:text>Incorrect XQueryX: function calls must not use unqualified "reserved" name "</xsl:text><xsl:value-of select="xqx:functionName"/><xsl:text>"</xsl:text></xsl:variable>
          <xsl:message terminate="yes"><xsl:value-of select="$message"/></xsl:message>
        </xsl:if>
      </xsl:otherwise>
    </xsl:choose>
    <xsl:value-of select="xqx:functionName"/>
    <xsl:text>#</xsl:text>
    <xsl:apply-templates select="xqx:integerConstantExpr"/>
  </xsl:template>

  <!-- part of higher-order functions -->
  <xsl:template match="xqx:inlineFunctionItemExpr">
    <xsl:text> function </xsl:text>
    <xsl:apply-templates select="xqx:paramList"/>
    <xsl:apply-templates select="xqx:typeDeclaration"/>
    <xsl:apply-templates select="xqx:functionBody"/>
  </xsl:template>

  <!-- rewrote pathExpr template per Bugzilla Bug #2523 -->
  <xsl:template match="xqx:pathExpr">
    <xsl:apply-templates select="xqx:rootExpr | xqx:stepExpr"/>
  </xsl:template>


  <!-- To resolve Bugzilla bug #3446, we now escape NL (#xA) and TAB (#x9)
       characters in attribute values -->
  <xsl:template match="xqx:attributeConstructor">
    <xsl:value-of select="$SPACE"/>
    <xsl:apply-templates select="xqx:attributeName"/>
    <xsl:value-of select="$EQUAL"/>
    <xsl:choose>
      <xsl:when test="xqx:attributeValue">
        <xsl:call-template name="globalReplace">
          <xsl:with-param name="stringToBeFixed">
            <xsl:call-template name="globalReplace">
              <xsl:with-param name="stringToBeFixed">
                <xsl:call-template name="quote">
                  <xsl:with-param name="item">
                    <xsl:call-template name="globalReplace">
                      <xsl:with-param name="stringToBeFixed">
                        <xsl:call-template name="globalReplace">
                          <xsl:with-param name="stringToBeFixed">
                            <xsl:value-of select="xqx:attributeValue"/>
                          </xsl:with-param>
                          <xsl:with-param name="toBeReplaced"><xsl:text>{</xsl:text></xsl:with-param>
                          <xsl:with-param name="replacement"><xsl:text>{{</xsl:text></xsl:with-param>
                        </xsl:call-template>
                      </xsl:with-param>
                      <xsl:with-param name="toBeReplaced"><xsl:text>}</xsl:text></xsl:with-param>
                      <xsl:with-param name="replacement"><xsl:text>}}</xsl:text></xsl:with-param>
                    </xsl:call-template>
                  </xsl:with-param>
                </xsl:call-template>
              </xsl:with-param>
              <xsl:with-param name="toBeReplaced" select="'&#xA;'"/>
              <xsl:with-param name="replacement">&amp;#xA;</xsl:with-param>
            </xsl:call-template>
          </xsl:with-param>
          <xsl:with-param name="toBeReplaced" select="'&#x9;'"/>
          <xsl:with-param name="replacement">&amp;#x9;</xsl:with-param>
        </xsl:call-template>
      </xsl:when>
      <xsl:otherwise>
        <xsl:value-of select="$DOUBLEQUOTE"/>
        <xsl:for-each select="./xqx:attributeValueExpr/xqx:*">
          <xsl:value-of select="$LBRACE"/>
            <xsl:apply-templates select="."/>
          <xsl:value-of select="$RBRACE"/>
        </xsl:for-each>
        <xsl:value-of select="$DOUBLEQUOTE"/>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:template>


  <!-- replaced xqx:namespaceDeclaration per Bugzilla Bug #5343 -->
  <xsl:template match="xqx:namespaceDeclaration">
    <xsl:text> xmlns</xsl:text>
    <xsl:if test="xqx:prefix">
      <xsl:text>:</xsl:text>
      <xsl:value-of select="xqx:prefix"/>
    </xsl:if>
    <xsl:value-of select="$EQUAL"/>
    <xsl:call-template name="quote">
       <xsl:with-param name="item">
         <xsl:call-template name="globalReplace">
           <xsl:with-param name="stringToBeFixed">
             <xsl:call-template name="globalReplace">
               <xsl:with-param name="stringToBeFixed">
                 <xsl:value-of select="xqx:uri"/>
               </xsl:with-param>
               <xsl:with-param name="toBeReplaced">
                 <xsl:text>{</xsl:text>
               </xsl:with-param>
               <xsl:with-param name="replacement">
                 <xsl:text>{{</xsl:text>
               </xsl:with-param>
             </xsl:call-template>
           </xsl:with-param>
           <xsl:with-param name="toBeReplaced">
             <xsl:text>}</xsl:text>
           </xsl:with-param>
           <xsl:with-param name="replacement">
             <xsl:text>}}</xsl:text>
           </xsl:with-param>
         </xsl:call-template>
       </xsl:with-param>
    </xsl:call-template>
  </xsl:template>


  <xsl:template match="xqx:attributeList">
    <xsl:apply-templates select="*"/>
  </xsl:template>


  <xsl:template match="xqx:elementContent">
    <xsl:for-each select="*">
      <xsl:if test="not(self::xqx:elementConstructor)">
        <xsl:value-of select="$SPACE"/>
        <xsl:value-of select="$LBRACE"/>
      </xsl:if>
      <xsl:apply-templates select="."/>
      <xsl:if test="not(self::xqx:elementConstructor)">
        <xsl:value-of select="$SPACE"/>
        <xsl:value-of select="$RBRACE"/>
      </xsl:if>
    </xsl:for-each>
  </xsl:template>


  <xsl:template match="xqx:elementConstructor">
    <xsl:value-of select="$LESSTHAN"/>
    <xsl:apply-templates select="xqx:tagName"/>
    <xsl:apply-templates select="xqx:attributeList"/>
    <xsl:value-of select="$GREATERTHAN"/>
    <xsl:apply-templates select="xqx:elementContent"/>
    <xsl:value-of select="$LESSTHAN"/>
    <xsl:value-of select="$SLASH"/>
    <xsl:apply-templates select="xqx:tagName"/>
    <xsl:value-of select="$GREATERTHAN"/>
  </xsl:template>


  <xsl:template match="xqx:tagNameExpr">
    <xsl:value-of select="$LBRACE"/>
    <xsl:apply-templates select="*"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:computedElementConstructor">
    <xsl:text> element </xsl:text>
    <xsl:apply-templates select="xqx:tagName"/>
    <xsl:apply-templates select="xqx:tagNameExpr"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$LBRACE"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:apply-templates select="xqx:contentExpr"/>     
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:contentExpr">
    <xsl:apply-templates/>
  </xsl:template>

  <xsl:template match="xqx:computedAttributeConstructor">
    <xsl:text> attribute </xsl:text>
    <xsl:apply-templates select="xqx:tagName"/>
    <xsl:apply-templates select="xqx:tagNameExpr"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$LBRACE"/>
    <xsl:apply-templates select="xqx:valueExpr"/>     
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:computedDocumentConstructor">
    <xsl:text> document {</xsl:text>
    <xsl:apply-templates select="*"/>
    <xsl:text> }</xsl:text>
  </xsl:template>


  <xsl:template match="xqx:computedTextConstructor">
    <xsl:text> text</xsl:text>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$LBRACE"/>
    <xsl:apply-templates select="*"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:computedCommentConstructor">
    <xsl:text> comment</xsl:text>
    <xsl:value-of select="$LBRACE"/>
    <xsl:apply-templates select="*"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:computedNamespaceConstructor">
    <xsl:text> namespace </xsl:text>
    <xsl:choose>
      <xsl:when test="xqx:prefix">
        <xsl:value-of select="xqx:prefix"/>
      </xsl:when>
      <xsl:otherwise>
        <xsl:value-of select="$LBRACE"/>
        <xsl:apply-templates select="xqx:prefixExpr"/>
        <xsl:value-of select="$RBRACE"/>
      </xsl:otherwise>
    </xsl:choose>
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$LBRACE"/>
    <xsl:apply-templates select="xqx:URIExpr"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:piTargetExpr">
    <xsl:value-of select="$LBRACE"/>
    <xsl:apply-templates select="*"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


<!-- Move value braces into computedPIConstructor template from this template, Bugzilla bug #3442 -->
  <xsl:template match="xqx:piValueExpr">
    <xsl:apply-templates select="*"/>
  </xsl:template>


<!-- Move value braces into this template from piValueExpr template, Bugzilla bug #3442 -->
  <xsl:template match="xqx:computedPIConstructor">
    <xsl:text> processing-instruction </xsl:text>
    <xsl:value-of select="xqx:piTarget"/>
    <xsl:apply-templates select="xqx:piTargetExpr"/>
    <xsl:value-of select="$LBRACE"/>
    <xsl:apply-templates select="xqx:piValueExpr"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:unorderedExpr">
    <xsl:text> unordered</xsl:text>
        <xsl:value-of select="$LBRACE"/>
    <xsl:text> </xsl:text>
    <xsl:apply-templates select="*"/>
    <xsl:text> </xsl:text>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:orderedExpr">
    <xsl:text> ordered</xsl:text>
        <xsl:value-of select="$LBRACE"/>
    <xsl:text> </xsl:text>
    <xsl:apply-templates select="*"/>
    <xsl:text> </xsl:text>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:versionDecl">
    <xsl:text>xquery </xsl:text>
    <xsl:if test="xqx:version">
      <xsl:text>version </xsl:text>
      <xsl:call-template name="quote">
        <xsl:with-param name="item" select="xqx:version"/>
      </xsl:call-template>
    </xsl:if>
    <xsl:if test="xqx:encoding and xqx:version">
      <xsl:value-of select="$SPACE"/>
    </xsl:if>
    <xsl:if test="xqx:encoding">
      <xsl:text>encoding </xsl:text>
      <xsl:call-template name="quote">
        <xsl:with-param name="item" select="xqx:encoding"/>
      </xsl:call-template>
    </xsl:if>
    <xsl:value-of select="$SEPARATOR"/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>


  <xsl:template match="xqx:namespaceDecl">
    <xsl:text>declare namespace </xsl:text>
    <xsl:value-of select="xqx:prefix"/>
    <xsl:value-of select="$EQUAL"/>
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="xqx:uri"/>
    </xsl:call-template>
  </xsl:template>


  <xsl:template match="xqx:defaultNamespaceDecl">
    <xsl:text>declare default </xsl:text>
    <xsl:value-of select="xqx:defaultNamespaceCategory"/>
    <xsl:text> namespace </xsl:text>
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="xqx:uri"/>
    </xsl:call-template>
  </xsl:template>


  <xsl:template match="xqx:boundarySpaceDecl">
    <xsl:text>declare boundary-space </xsl:text>
    <xsl:value-of select="."/>
  </xsl:template>


  <xsl:template match="xqx:defaultCollationDecl">
    <xsl:text>declare default collation </xsl:text>
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="."/>
    </xsl:call-template>
  </xsl:template>


  <xsl:template match="xqx:baseUriDecl">
    <xsl:text>declare base-uri </xsl:text>
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="."/>
    </xsl:call-template>
  </xsl:template>

  <xsl:template match="xqx:constructionDecl">
    <xsl:text>declare construction </xsl:text>
    <xsl:value-of select="."/>
  </xsl:template>


  <xsl:template match="xqx:orderingModeDecl">
    <xsl:text>declare ordering </xsl:text>
    <xsl:value-of select="."/>
  </xsl:template>


  <xsl:template match="xqx:emptyOrderingDecl">
    <xsl:text>declare default order </xsl:text>
    <xsl:value-of select="."/>
  </xsl:template>


  <xsl:template match="xqx:copyNamespacesDecl">
    <xsl:text>declare copy-namespaces </xsl:text>
    <xsl:value-of select="xqx:preserveMode"/>
    <xsl:value-of select="$COMMA"/>
    <xsl:value-of select="xqx:inheritMode"/>
  </xsl:template>


  <xsl:template match="xqx:optionDecl">
    <xsl:text>declare option </xsl:text>
    <xsl:apply-templates select="xqx:optionName"/>
    <xsl:value-of select="$SPACE"/>
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="xqx:optionContents"/>
    </xsl:call-template>
  </xsl:template>


  <xsl:template match="xqx:decimalFormatDecl">
    <xsl:if test="@xqx:default = 'true' and xqx:decimalFormatName">
      <xsl:message terminate="yes">Incorrect XQueryX:
          xqx:decimalFormatDecl does not allow both @default=true and xqx:decimalFormatName</xsl:message>
    </xsl:if>
    <xsl:text>declare </xsl:text>
    <xsl:if test="@xqx:default = 'true'">
      <xsl:text>default </xsl:text>
    </xsl:if>
    <xsl:text>decimal-format </xsl:text>
    <xsl:if test="xqx:decimalFormatName">
      <xsl:apply-templates select="xqx:decimalFormatName"/>
      <xsl:text> </xsl:text>
    </xsl:if>
    <xsl:apply-templates select="xqx:decimalFormatParam"/>
  </xsl:template>


  <xsl:template match="xqx:decimalFormatParam">
    <xsl:value-of select="xqx:decimalFormatParamName"/>
    <xsl:text> = </xsl:text>

    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="xqx:decimalFormatParamValue"/>
    </xsl:call-template>

    <xsl:text> </xsl:text>
  </xsl:template>


  <xsl:template match="xqx:voidSequenceType">
    <xsl:text>empty-sequence()</xsl:text>
  </xsl:template>


  <xsl:template match="xqx:occurrenceIndicator">
    <xsl:value-of select="."/>
  </xsl:template>


  <xsl:template match="xqx:anyItemType">
    <xsl:text>item()</xsl:text>
  </xsl:template>


  <xsl:template match="xqx:sequenceType">
    <xsl:apply-templates select="*"/>
  </xsl:template>


  <xsl:template match="xqx:singleType">
    <xsl:apply-templates select="xqx:atomicType"/>
    <xsl:if test="xqx:optional">
      <xsl:text>?</xsl:text>
    </xsl:if>
  </xsl:template>


  <xsl:template match="xqx:typeDeclaration">
    <xsl:text> as </xsl:text>
    <xsl:apply-templates select="*"/>
  </xsl:template>


  <xsl:template match="xqx:contextItemDecl">
    <xsl:text>declare context item </xsl:text>
    <xsl:apply-templates select="xqx:typeDeclaration"/>
    <xsl:if test="xqx:varValue">
      <xsl:value-of select="$ASSIGN"/>
      <xsl:apply-templates select="xqx:varValue"/>
    </xsl:if>
    <xsl:if test="xqx:external">
      <xsl:text> external </xsl:text>
      <xsl:if test="xqx:external/xqx:varValue">
        <xsl:text>:= </xsl:text>
        <xsl:apply-templates select="xqx:external/xqx:varValue"/>
      </xsl:if>
    </xsl:if>
  </xsl:template>


  <xsl:template match="xqx:annotation">
    <xsl:value-of select="$SPACE"/>
    <xsl:value-of select="$PERCENT"/>
    <xsl:apply-templates select="xqx:annotationName"/>
    <xsl:if test="xqx:arguments">
      <xsl:for-each select="xqx:arguments">
         <xsl:call-template name="parenthesizedList"/>
      </xsl:for-each>
    </xsl:if>
  </xsl:template>


  <xsl:template match="xqx:varDecl">
    <xsl:text>declare</xsl:text>
    <xsl:apply-templates select="xqx:annotation"/>
    <xsl:text> variable </xsl:text>
    <xsl:value-of select="$DOLLAR"/>
    <xsl:apply-templates select="xqx:varName"/>
    <xsl:apply-templates select="xqx:typeDeclaration"/>
    <xsl:if test="xqx:varValue">
      <xsl:value-of select="$ASSIGN"/>
      <xsl:apply-templates select="xqx:varValue"/>
    </xsl:if>
    <xsl:if test="xqx:external">
      <xsl:text> external </xsl:text>
      <xsl:if test="xqx:external/xqx:varValue">
        <xsl:text>:= </xsl:text>
        <xsl:apply-templates select="xqx:external/xqx:varValue"/>
      </xsl:if>
    </xsl:if>
  </xsl:template>


<!-- Part of fix for Bugzilla bug #3520 -->
  <xsl:template match="xqx:targetLocation">
    <xsl:choose>
      <xsl:when test="position()=1"> at </xsl:when>
      <xsl:otherwise>,&#xD;  </xsl:otherwise>
    </xsl:choose>
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="."/>
    </xsl:call-template>
  </xsl:template>


<!-- Modified to fix Bugzilla bug #3520 -->
  <xsl:template match="xqx:schemaImport">
    <xsl:text> import schema </xsl:text>
    <xsl:if test="xqx:defaultElementNamespace">
      <xsl:text> default element namespace </xsl:text>
    </xsl:if>
    <xsl:if test="xqx:namespacePrefix">
      <xsl:text> namespace </xsl:text>
      <xsl:value-of select="xqx:namespacePrefix"/>
      <xsl:value-of select="$EQUAL"/>
    </xsl:if>
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="xqx:targetNamespace"/>
    </xsl:call-template>
    <xsl:apply-templates select="xqx:targetLocation"/>
  </xsl:template>


<!-- Modified to fix Bugzilla bug #3520 -->
  <xsl:template match="xqx:moduleImport">
    <xsl:text> import module </xsl:text>
    <xsl:if test="xqx:namespacePrefix">
      <xsl:text> namespace </xsl:text>
      <xsl:value-of select="xqx:namespacePrefix"/>
      <xsl:value-of select="$EQUAL"/>
    </xsl:if>
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="xqx:targetNamespace"/>
    </xsl:call-template>
    <xsl:apply-templates select="xqx:targetLocation"/>
  </xsl:template>


  <xsl:template match="xqx:param">
    <xsl:value-of select="$DOLLAR"/>
    <xsl:apply-templates select="xqx:varName"/>
    <xsl:apply-templates select="xqx:typeDeclaration"/>
  </xsl:template>


  <xsl:template match="xqx:paramList">
    <xsl:call-template name="parenthesizedList"/>
  </xsl:template>


  <xsl:template match="xqx:functionBody">
    <xsl:value-of select="$NEWLINE"/>
    <xsl:value-of select="$LBRACE"/>
    <xsl:value-of select="$NEWLINE"/>
    <xsl:apply-templates/>
    <xsl:value-of select="$NEWLINE"/>
    <xsl:value-of select="$RBRACE"/>
  </xsl:template>


  <xsl:template match="xqx:functionDecl">
    <xsl:text>declare</xsl:text>
    <xsl:apply-templates select="xqx:annotation"/>
    <xsl:text> function </xsl:text>
    <xsl:apply-templates select="xqx:functionName"/>
    <xsl:apply-templates select="xqx:paramList"/>
    <xsl:apply-templates select="xqx:typeDeclaration"/>
    <xsl:choose>
      <xsl:when test="xqx:externalDefinition">
        <xsl:text> external </xsl:text>
      </xsl:when>
      <xsl:otherwise>
        <xsl:apply-templates select="xqx:functionBody"/>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:template>


  <xsl:template match="xqx:queryBody">
    <xsl:apply-templates select="*"/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>

  <xsl:template match="xqx:moduleDecl">
    <xsl:text> module namespace </xsl:text>
    <xsl:value-of select="xqx:prefix"/>
    <xsl:value-of select="$EQUAL"/>
    <xsl:call-template name="quote">
      <xsl:with-param name="item" select="xqx:uri" />
    </xsl:call-template>
    <xsl:value-of select="$SEPARATOR"/>
    <xsl:value-of select="$NEWLINE"/>
  </xsl:template>


  <xsl:template match="xqx:prolog">
    <xsl:for-each select="*">
      <xsl:apply-templates select="."/>
      <xsl:value-of select="$SEPARATOR"/>
      <xsl:value-of select="$NEWLINE"/>
    </xsl:for-each>
  </xsl:template>


  <xsl:template match="xqx:libraryModule">
    <xsl:apply-templates select="xqx:moduleDecl"/>
    <xsl:apply-templates select="xqx:prolog"/>
  </xsl:template>


  <xsl:template match="xqx:mainModule">
    <xsl:apply-templates select="xqx:prolog"/>
    <xsl:apply-templates select="xqx:queryBody"/>
  </xsl:template>


  <xsl:template match="xqx:module" priority="2">
    <xsl:apply-templates select="*"/>
  </xsl:template>


  <xsl:template match="/xqx:*">
   <xsl:message terminate="yes">Incorrect XQueryX: The only top-level element permitted is xqx:module</xsl:message>
  </xsl:template>


</xsl:stylesheet>

C The application/xquery+xml Media Type

This Appendix specifies the media type for XQueryX Version 3.0. XQueryX is the XML syntax of a language, XQuery, for querying over data from XML data sources, as specified in [XQuery 3.0: An XML Query Language].

Note:

Specification of media types is described in [RFC 3023].

C.2 Registration of MIME Media Type application/xquery+xml

MIME media type name: application

MIME subtype name: xquery+xml

Required parameters: none

Optional parameters: charset

This parameter has identical semantics to the charset parameter of the application/xml media type as specified in [RFC 3023].

C.2.5 Applications That Use This Media Type

The public XQuery Web page lists more than two dozen implementations of the XQuery language, both proprietary and open source. Some of these are known to support XQueryX.

This new media type is being registered to allow for deployment of XQueryX on the World Wide Web.

There is no experimental, vendor specific, or personal tree predecessor to "application/xquery+xml", reflecting the fact that no applications currently recognize it. This new type is being registered in order to allow for the expected deployment of XQueryX 3.0 on the World Wide Web, as a first class XML application.

D Change log (Non-Normative)

This appendix lists the changes that have been made to this specification since the publication of the XQueryX 1.0 Recommendation on 23 January 2007.

D.1 Substantive changes

In the Working Draft of 14 December 2010, the following substantive changes have been made relative to XQueryX 1.0. The changes made to this document are described below. The rationale for each change is explained in the corresponding Bugzilla database entry (if any). The following table summarizes the errata that have been applied.

ChangeBugzillaCategoryDescription
Group By clause in FLWOR expression. None. Substantive. A new clause was added to the FLWOR expression to allow query writers to cause groups of tuples to be created based on the values of some expression.
Window clause in FLWOR expression. None. Substantive. A new clause was added to the FLWOR expression to allow query writers to create sliding and tumbling windows of tuples based on a number of criteria.
Simplification of FLWOR expression. None. Substantive. The syntax of the FLWOR expression was considerably relaxed, permitting most clauses (other than the return clause) to be used at almost any position (only a few clauses are allowed to be the first clause) within a FLWOR expression.
Outer for supported in FLWOR expressions. None. Substantive. The syntax of the for clause in FLWOR expressions was extended to allow the use of "outer for".
Count clause in FLWOR expression. None. Substantive. A new clause was added to the FLWOR expression to allow query writers to capture the total number of items that are returned by a (portion of a) FLWOR expression.
Declaration of decimal number formats. None. Substantive. A new option was added to the query prologue, allowing query authors to specify a named (or an unnamed default) format for decimal numbers. This allows the specification of such items as the decimal separator, the minus sign, the percent and per mille signs, and even the class of Unicode digits.
Query version and encoding declaration. None. Substantive. Allows specification of either or both of the version of XQuery to which a query adheres and the encoding of the query (e.g., UTF8, ISO8859-1).
Enhanced validation expression. [XQuery 1.1] Requirement: validation by type Substantive. Permits query authors to validate an expression against a specified XML Schema type.
Nondeterministic external functions. None. Substantive. Functions declared to be external functions can also be specified to be deterministic or nondeterministic.
Syntax used to provide default value for external variables. None. Minor. The declaration of external variables now uses ":=" to indicate the default value given to such variables, instead of the keyword "default".
Try/catch for error handling. None. Substantive. A try/catch facility is provided that allows query authors to control how errors are handled when raised by evaluation of queries.
Context item declaration. None. Substantive. It is now possible to declare both the type of and the default initial value of the context item of a query, and to specify whether its value may be provided by the external environment.
Computed namespace constructor. None. Substantive. Added new complex type and element to XQueryX schema, and new template to XQueryX stylesheet, in support of computed namespace constructors in XQuery 1.1.
Generate proper syntax for variable names in positional variable bindings. [XQX30] template for positionalVariableBinding Substantive. Modified XQueryX stylesheet template to correctly generate a "$" preceding the variable name.
Allow positional variable bindings to be optional in window variables. [XQX30] positionalVariableBinding should be optional in windowVars Substantive. Modified XQueryX schema to add minOccurs="0" on element positionalVariableBinding in windowVars complex type definition.
XQueryX syntax must allow wildcards in the try/catch error list. [XQX30] cannot represent a catchErrorList wildcard in XQueryX Substantive. In XQueryX schema, modified catchErrorList complex type definition to allow a choice between a nameText (essentially a QName) and a Wildcard. In XQueryX stylesheet, modified catchErrorList template to support Wildcard as well as nameText.
Private functions. None. Substantive. In XQueryX schema, added new attribute "private" in functionDecl complex type. In XQUeryX stylesheet, template for functionDecl, added support for @private (generate "private" for private functions and "public" for others)
Replace "outer for" with "allowing empty". None. Substantive. In XQueryX schema, forClause complex type, delete attribute "outer"; in forClauseItem complex type, add new element allowingEmpty. In XQueryX stylesheet template for forClause, remove generation of "outer"; in template for forClauseItem, generate "allowing empty".
Higher-order functions. None. Substantive. Made changes to XQueryX schema and stylesheet corresponding to new higher-order function syntax in XQuery 1.1.
New "switch" expression ("value switch", analogous to typeswitch). None. Substantive. Made changes to XQueryX schema and stylesheet corresponding to new switch syntax in XQuery 3.0.
Support for partial function application. None. Substantive. Made changes to XQueryX schema and stylesheet to support the partial function application capability of XQuery 3.0.

D.3 Editorial changes

In the Working Draft of 14 December 2010, the following editorial changes have been made relative to XQueryX 1.0. The changes made to this document are described below. The rationale for each change is explained in the corresponding Bugzilla database entry (if any). The following table summarizes the errata that have been applied.

ChangeBugzillaCategoryDescription
Erratum XQX.E1 Arguably incorrect element definition in XQueryX's Schema. Editorial. The published XQueryX 1.0 schema defined many elements using anonymous complex types. That made it infeasible to extend the content model of those elements in other specifications that define XQueryX extensions corresponding perhaps to XQuery extensions. While conceptually simple, a number of changes were required to ensure that all elements are defined using named complex types.
Erratum XQX.E2 and Erratum XQX.E3 Removed element xqx:parenthesizedExpr used in example. Editorial. The XQueryX solution to Example 4 incorrectly contained an <xqx:parenthesizedExpr> element. That element was changed to an <xqx:sequenceExpr> element. The XSLT stylesheet in Appendix B contained a template for the transformation of <xqx:parenthesizedExpr> elements that was unnecessary and confusing; that template was deleted.
Erratum XQX.E4 Bug in XQueryX applet Editorial. The XQueryX 1.0 Recommendation linked to an obsolete version of the XQuery 1.0 grammar applet. The proper link has now been used.
Erratum XQX.E5 Problem with {{ and }} in a Namespace Declaration Attribute Editorial. The XSLT stylsheet in Appendix B contained a template for the transformation of <xqx:namespaceDeclaration> elements that failed to correctly "escape" curly braces in the same manner as does the template for the transformation of <xqx:attributeConstructor> elements. That template has been corrected.
Introduction. [XQX] non-normative notes Editorial. Added text in 1 Introduction to clarify that Notes are non-normative.
This appendix. None. Editorial. Reorganized this appendix to more clearly distinguish between substantive and editorial changes and to clearly identify incompatibilities with the previous Recommendation.
Version number. None. Editorial. Changed the version number of the spec from 1.1 to 3.0.