W3C

Geolocation API Specification

W3C Working Draft 07 July 2009

This Version:
http://www.w3.org/TR/2009/WD-geolocation-API-20090707/
Latest Published Version:
http://www.w3.org/TR/geolocation-API/
Latest Editor's Draft:
http://dev.w3.org/geo/api/spec-source.html
Previous version:
http://www.w3.org/TR/2008/WD-geolocation-API-20081222/
Editor:
Andrei Popescu, Google, Inc

Abstract

This specification defines an API that provides scripted access to geographical location information associated with the hosting device.

Status of This Document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

This document was published by the Geolocation Working Group as a Last Call Working Draft. This document is intended to become a W3C Recommendation. If you wish to make comments regarding this document, please send them to public-geolocation@w3.org (subscribe, archives). The Last Call period ends 10 August 2009. All feedback is welcome.

Publication as a Working Draft does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

This is a Last Call Working Draft and thus the Working Group has determined that this document has satisfied the relevant technical requirements and is sufficiently stable to advance through the Technical Recommendation process. Changes made since the previous version are available.

This document was produced by a group operating under the 5 February 2004 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.

Table of Contents

1 Conformance requirements

All diagrams, examples, and notes in this specification are non-normative, as are all sections explicitly marked non-normative. Everything else in this specification is normative.

The key words "MUST", "MUST NOT", "REQUIRED", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in the normative parts of this document are to be interpreted as described in RFC2119. For readability, these words do not appear in all uppercase letters in this specification. [RFC2119]

Requirements phrased in the imperative as part of algorithms (such as "strip any leading space characters" or "return false and abort these steps") are to be interpreted with the meaning of the key word ("must", "should", "may", etc) used in introducing the algorithm.

Conformance requirements phrased as algorithms or specific steps may be implemented in any manner, so long as the end result is equivalent. (In particular, the algorithms defined in this specification are intended to be easy to follow, and not intended to be performant.)

User agents may impose implementation-specific limits on otherwise unconstrained inputs, e.g. to prevent denial of service attacks, to guard against running out of memory, or to work around platform-specific limitations.

Implementations that use ECMAScript to implement the APIs defined in this specification must implement them in a manner consistent with the ECMAScript Bindings defined in the Web IDL specification, as this specification uses that specification's terminology. [WEBIDL]

2 Introduction

This section is non-normative.

The Geolocation API defines a high-level interface to location information associated only with the device hosting the implementation, such as latitude and longitude. The API itself is agnostic of the underlying location information sources. Common sources of location information include Global Positioning System (GPS) and location inferred from network signals such as IP address, RFID, WiFi and Bluetooth MAC addresses, and GSM/CDMA cell IDs, as well as user input. No guarantee is given that the API returns the device's actual location.

The API is designed to enable both "one-shot" position requests and repeated position updates, as well as the ability to explicitly query the cached positions. Location information is represented by latitude and longitude coordinates. The Geolocation API in this specification builds upon earlier work in the industry, including [AZALOC], [GEARSLOC], and [LOCATIONAWARE].

The following code extract illustrates how to obtain basic location information:

Example of a "one-shot" position request.

    function showMap(position) {
      // Show a map centered at (position.coords.latitude, position.coords.longitude).
    }

    // One-shot position request.
    navigator.geolocation.getCurrentPosition(showMap);
    

Example of requesting repeated position updates.

    function scrollMap(position) {
      // Scrolls the map so that it is centered at (position.coords.latitude, position.coords.longitude).
    }

    // Request repeated updates.
    var watchId = navigator.geolocation.watchPosition(scrollMap);

    function buttonClickHandler() {
      // Cancel the updates when the user clicks a button.
      navigator.geolocation.clearWatch(watchId);
    }
    

Example of requesting repeated position updates and handling errors.

    function scrollMap(position) {
      // Scrolls the map so that it is centered at (position.coords.latitude, position.coords.longitude).
    }

    function handleError(error) {
      // Update a div element with error.message.
    }

    // Request repeated updates.
    var watchId = navigator.geolocation.watchPosition(scrollMap, handleError);

    function buttonClickHandler() {
      // Cancel the updates when the user clicks a button.
      navigator.geolocation.clearWatch(watchId);
    }
    

Example of requesting a potentially cached position.

    // Request a position. We accept positions whose age is not
    // greater than 10 minutes. If the User Agent does not have a
    // fresh enough cached position object, it will automatically
    // acquire a new one.
    navigator.geolocation.getCurrentPosition(successCallback,
                                             errorCallback,
                                             {maximumAge:600000});

    function successCallback(position) {
      // By using the 'maximumAge' option above, the position
      // object is guaranteed to be at most 10 minutes old.
    }

    function errorCallback(error) {
      // Update a div element with error.message.
    }

    

Forcing the User Agent to return a fresh cached position.

    // Request a position. We only accept cached positions whose age is not
    // greater than 10 minutes. If the User Agent does not have a fresh
    // enough cached position object, it will immediately invoke the error
    // callback.
    navigator.geolocation.getCurrentPosition(successCallback,
                                             errorCallback,
                                             {maximumAge:600000, timeout:0});

    function successCallback(position) {
      // By using the 'maximumAge' option above, the position
      // object is guaranteed to be at most 10 minutes old.
      // By using a 'timeout' of 0 milliseconds, if there is
      // no suitable cached position available, the User Agent 
      // will immediately invoke the error callback with code
      // TIMEOUT and will not initiate a new position
      // acquisition process.
    }

    function errorCallback(error) {
      switch(error.code) {
        case error.TIMEOUT:
          // Quick fallback when no suitable cached position exists.
          doFallback();
          // Acquire a new position object.
          navigator.geolocation.getCurrentPosition(successCallback, errorCallback);
          break;
        case ... // treat the other error cases.
      };
    }

    function doFallback() {
      // No fresh enough cached position available.
      // Fallback to a default position.
    }
    

Forcing the User Agent to return any available cached position.

    // Request a position. We only accept cached positions, no matter what 
    // their age is. If the User Agent does not have a cached position at
    // all, it will immediately invoke the error callback.
    navigator.geolocation.getCurrentPosition(successCallback,
                                             errorCallback,
                                             {maximumAge:Infinity, timeout:0});

    function successCallback(position) {
      // By setting the 'maximumAge' to Infinity, the position
      // object is guaranteed to be a cached one.
      // By using a 'timeout' of 0 milliseconds, if there is
      // no cached position available at all, the User Agent 
      // will immediately invoke the error callback with code
      // TIMEOUT and will not initiate a new position
      // acquisition process.
      if (position.timestamp < freshness_threshold && 
          position.coords.accuracy < accuracy_threshold) {
        // The position is relatively fresh and accurate.
      } else {
        // The position is quite old and/or inaccurate.
      }
    }

    function errorCallback(error) {
      switch(error.code) {
        case error.TIMEOUT:
          // Quick fallback when no cached position exists at all.
          doFallback();
          // Acquire a new position object.
          navigator.geolocation.getCurrentPosition(successCallback, errorCallback);
          break;
        case ... // treat the other error cases.
      };
    }

    function doFallback() {
      // No cached position available at all.
      // Fallback to a default position.
    }
    

3 Scope

This section is non-normative.

This specification is limited to providing a scripting API for retrieving geographic position information associated with a hosting device. The geographic position information is provided in terms of World Geodetic System coordinates [WGS84].

The scope of this specification does not include providing a markup language of any kind.

The scope of this specification does not include defining new URI schemes for building URIs that identify geographic locations.

4 Security and privacy considerations

The API defined in this specification can be used to retrieve the geographic location of a hosting device. In almost all cases, this information also discloses the location of the user of the device, thereby potentially compromising the user's privacy. A conforming implementation of this specification must provide a mechanism that protects the user's privacy and this mechanism should ensure that no location information is made available without the user's express permission.

4.1 Privacy considerations for implementors of the Geolocation API

User Agents must not send location information to Web sites without the express permission of the user. User Agents must acquire permission through a user interface, unless they have prearranged trust relationships with users, as described below. The user interface must include the URI of the document origin [DOCUMENTORIGIN]. Those permissions that are acquired through the user interface and that are preserved beyond the current browsing session (i.e. beyond the time when the browsing context [BROWSINGCONTEXT] is navigated to another URL) must be revocable and User Agents must respect revoked permissions.

Some User Agents will have prearranged trust relationships that do not require such user interfaces. For example, while a Web browser will present a user interface when a Web site performs a geolocation request, a VOIP telephone may not present any user interface when using location information to perform an E911 function.

4.2 Privacy considerations for recipients of location information

Recipients must only request location information when necessary. Recipients must only use the location information for the task for which it was provided to them. Recipients must dispose of location information once that task is completed, unless expressly permitted to retain it by the user. Recipients must also take measures to protect this information against unauthorized access. If location information is stored, users should be allowed to update and delete this information.

The recipient of location information must not retransmit the location information without the user’s express permission. Care should be taken when retransmitting and use of encryption is encouraged.

Recipients must clearly and conspicuously disclose the fact that they are collecting location data, the purpose for the collection, how long the data is retained, how the data is secured, how the data is shared if it is shared, how users may access, update and delete the data, and any other choices that users have with respect to the data. This disclosure must include an explanation of any exceptions to the guidelines listed above.

4.3 Additional implementation considerations

This section is non-normative.

Further to the requirements listed in the previous section, implementors of the Geolocation API are also advised to consider the following aspects that may negatively affect the privacy of their users: in certain cases, users may inadvertently grant permission to the User Agent to disclose their location to Web sites. In other cases, the content hosted at a certain URL changes in such a way that the previously granted location permissions no longer apply as far as the user is concerned. Or the users might simply change their minds.

Predicting or preventing these situations is inherently difficult. Mitigation and in-depth defensive measures are an implementation responsibility and not prescribed by this specification. However, in designing these measures, implementers are advised to enable user awareness of location sharing, and to provide easy access to interfaces that enable revocation of permissions.

5 API Description

5.1 Geolocation interface

The Geolocation object can be used by scripts to programmatically determine the location information associated with the hosting device. The location information is acquired by applying a user-agent specific algorithm, creating a Position object, and populating that object with appropriate data accordingly.

Objects implementing the Navigator interface (e.g. the window.navigator object) must also implement the NavigatorGeolocation interface [NAVIGATOR]. An instance of NavigatorGeolocation would be then obtained by using binding-specific casting methods on an instance of Navigator.

  [NoInterfaceObject]
  interface NavigatorGeolocation {
    readonly attribute Geolocation geolocation;
  };
  


 interface Geolocation { 
    void getCurrentPosition(in PositionCallback successCallback, [Optional] in PositionErrorCallback errorCallback, [Optional] in PositionOptions options);

    long watchPosition(in PositionCallback successCallback, [Optional] in PositionErrorCallback errorCallback, [Optional] in PositionOptions options);

    void clearWatch(in int watchId);
  };

  [Callback=FunctionOnly, NoInterfaceObject]
  interface PositionCallback {
    void handleEvent(in Position position);
  };

  [Callback=FunctionOnly, NoInterfaceObject]
  interface PositionErrorCallback {
    void handleEvent(in PositionError error);
  };
  

The getCurrentPosition() takes one, two or three arguments. When called, it must immediately return and then asynchronously acquire a new Position object. If successful, this method must invoke its associated successCallback argument with a Position object as an argument. If the attempt fails, and the method was invoked with a non-null errorCallback argument, this method must invoke the errorCallback with a PositionError object as an argument.

The watchPosition() takes one, two or three arguments. When called, it must immediately return and then asynchronously start a watch process defined as the following set of steps:

  1. Acquire a new Position object. If successful, invoke the associated successCallback with a Position object as an argument. If the attempt fails, and the method was invoked with a non-null errorCallback argument, this method must invoke the errorCallback with a PositionError object as an argument.
  2. Invoke the appropriate callback with a new Position object every time the implementation determines that the position of the hosting device has changed.

This method returns an integer value that uniquely identifies the watch process. When the clearWatch() method is called with this identifier, the watch process must stop acquiring any new position fixes and must cease invoking any callbacks.

5.2 PositionOptions interface

The getCurrentPosition() and watchPosition() methods accept PositionOptions objects as their third argument.

PositionOptions objects are regular ECMAScript objects that have the following properties:

  [Callback, NoInterfaceObject]
  interface PositionOptions {
    attribute boolean enableHighAccuracy;
    attribute long timeout;
    attribute long maximumAge;
  };

  

The enableHighAccuracy, timeout and maximumAge attributes are all optional: when creating a PositionOptions object, the developer may specify any of these attributes.

The enableHighAccuracy attribute provides a hint that the application would like to receive the best possible results. This may result in slower response times or increased power consumption. The user might also deny this capability, or the device might not be able to provide more accurate results than if the flag wasn't specified.

The timeout attribute denotes the maximum length of time (expressed in milliseconds) that is allowed to pass from the call to getCurrentPosition() or watchPosition() until the corresponding successCallback is invoked. If the implementation is unable to successfully acquire a new Position before the given timeout elapses, and no other errors have occurred in this interval, then the corresponding errorCallback must be invoked with a PositionError object whose code attribute is set to TIMEOUT.

Before executing a call to getCurrentPosition() or watchPosition(), an implementation may first need to acquire the user's permission to disclose location information to the current application origin. In such a case, the timeout interval starts immediately after the user's permission has been successfully acquired.

In case of a getCurrentPosition() call, the errorCallback would be invoked exactly once.

In case of a watchPosition(), the errorCallback could be invoked repeatedly: the first timeout is relative to the moment watchPosition() was called, while subsequent timeouts are relative to the moment when the implementation determines that the position of the hosting device has changed and a new Position object must be acquired.

The maximumAge attribute indicates that the application is willing to accept a cached position whose age is no greater than the specified time in milliseconds. If maximumAge is not specified or set to 0, the implementation must immediately attempt to acquire a new position object. Setting the maximumAge to Infinity will force the implementation to return a cached position regardless of its age. If an implementation does not have a cached position available whose age is no greater than the specified maximumAge, then it must acquire a new position object. In case of a watchPosition(), the maximumAge refers to the first position object returned by the implementation.

5.3 Position interface

The Position interface is the container for the geolocation information returned by this API. This version of the specification allows one attribute of type Coordinates and a timestamp. Future versions of the API may allow additional attributes that provide other information about this position (e.g. street addresses).

  interface Position {
    readonly attribute Coordinates coords;
    readonly attribute DOMTimeStamp timestamp;
  };
  

The coords attribute contains a set of geographic coordinates together with their associated accuracy, as well as a set of other optional attributes such as altitude and speed.

The timestamp attribute represents the time when the Position object was acquired and is represented as a DOMTimeStamp [DOMTIMESTAMP].

5.4 Coordinates interface

  interface Coordinates {
    readonly attribute double latitude;
    readonly attribute double longitude;
    readonly attribute double altitude;
    readonly attribute double accuracy;
    readonly attribute double altitudeAccuracy;
    readonly attribute double heading;
    readonly attribute double speed;
  };
  

The geographic coordinate reference system used by the attributes in this interface is the World Geodetic System (2d) [WGS84]. No other reference system is supported.

The latitude and longitude attributes are geographic coordinates specified in decimal degrees.

The altitude attribute denotes the height of the position, specified in meters above the [WGS84] ellipsoid. If the implementation cannot provide altitude information, the value of this attribute must be null.

The accuracy attribute denotes the accuracy level of the latitude and longitude coordinates. It is specified in meters and must be supported by all implementations.

The altitudeAccuracy attribute is specified in meters. If the implementation cannot provide altitude information, the value of this attribute must be null.

The accuracy and altitudeAccuracy values returned by an implementation should correspond to a 95% confidence level.

The heading attribute denotes the direction of travel of the hosting device and is specified in degrees counting clockwise relative to the true north. If the implementation cannot provide heading information, the value of this attribute must be null.

The speed attribute denotes the current ground speed of the hosting device and is specified in meters per second. If the implementation cannot provide speed information, the value of this attribute must be null.

5.5 PositionError interface

  interface PositionError {
    const unsigned short UNKNOWN_ERROR = 0;
    const unsigned short PERMISSION_DENIED = 1;
    const unsigned short POSITION_UNAVAILABLE = 2;
    const unsigned short TIMEOUT = 3;
    readonly attribute unsigned short code;
    readonly attribute DOMString message;
  };
  

The code attribute must return the appropriate code from the following list:

UNKNOWN_ERROR (numeric value 0)
The location acquisition process failed due to an error not covered by the definition of any other error code in this interface.
PERMISSION_DENIED (numeric value 1)
The location acquisition process failed because the application origin does not have permission to use the Geolocation API.
POSITION_UNAVAILABLE (numeric value 2)
The position of the device could not be determined. One or more of the location providers used in the location acquisition process reported an internal error that caused the process to fail entirely.
TIMEOUT (numeric value 3)
The specified maximum length of time has elapsed before the implementation could successfully acquire a new Position object.

The message attribute must return an error message describing the details of the error encountered. This attribute is primarily intended for debugging and developers should not use it directly in their application user interface.

6 Use-Cases and Requirements

6.1 Use-Cases

6.1.1 Find points of interest in the user's area

Someone visiting a foreign city could access a Web application that allows users to search or browse through a database of tourist attractions. Using the Geolocation API, the Web application has access to the user's approximate position and it is therefore able to rank the search results by proximity to the user's location.

6.1.2 Annotating content with location information

A group of friends is hiking through the Scottish highlands. Some of them write short notes and take pictures at various points throughout the journey and store them using a Web application that can work offline on their hand-held devices. Whenever they add new content, the application automatically tags it with location data from the Geolocation API (which, in turn, uses the on-board GPS device). Every time they reach a town or a village, and they are again within network coverage, the application automatically uploads their notes and pictures to a popular blogging Web site, which uses the geolocation data to construct links that point to a mapping service. Users who follow the group's trip can click on these links to see a satellite view of the area where the notes were written and the pictures were taken. Another example is a life blog where a user creates content (e.g. images, video, audio) that records her every day experiences. This content can be automatically annotated with information such as time, geographic position or even the user's emotional state at the time of the recording.

6.1.3 Show the user's position on a map

A user finds herself in an unfamiliar city area. She wants to check her position so she uses her hand-held device to navigate to a Web-based mapping application that can pinpoint her exact location on the city map using the Geolocation API. She then asks the Web application to provide driving directions from her current position to her desired destination.

6.1.4 Turn-by-turn route navigation

A mapping application can help the user navigate along a route by providing detailed turn-by-turn directions. The application does this by registering with the Geolocation API to receive repeated location updates of the user's position. These updates are delivered as soon as the implementing User Agent determines that the position of the user has changed, which allows the application to anticipate any changes of direction that the user might need to do.

6.1.5 Alerts when points of interest are in the user's vicinity

A tour-guide Web application can use the Geolocation API to monitor the user's position and trigger visual or audio notifications when interesting places are in the vicinity. An online task management system can trigger reminders when the user is in the proximity of landmarks that are associated with certain tasks.

6.1.6 Up-to-date local information

A widget-like Web application that shows the weather or news that are relevant to the user's current area can use the Geolocation API to register for location updates. If the user's position changes, the widget can adapt the content accordingly.

6.1.7 Location-tagged status updates in social networking applications

A social network application allows its users to automatically tag their status updates with location information. It does this by monitoring the user's position with the Geolocation API. Each user can control the granularity of the location information (e.g. city or neighbourhood level) that is shared with the other users. Any user can also track his network of friends and get real-time updates about their current location.

6.2 Requirements

6.2.1 The Geolocation API must provide location data in terms of a pair of latitude and longitude coordinates.

6.2.2 The Geolocation API must provide information about the accuracy of the retrieved location data.

6.2.3 The Geolocation API must support "one-shot" position updates.

6.2.4 The Geolocation API must allow an application to register to receive updates when the position of the hosting device changes.

6.2.5 The Geolocation API must allow an application to cheaply query the last known position.

6.2.6 The Geolocation API must provide a way for the application to receive updates about errors that may have occurred while obtaining a location fix.

6.2.7 The Geolocation API must allow an application to specify a desired accuracy level of the location information.

6.2.8 The Geolocation API must be agnostic to the underlying sources of location information.

Acknowledgments

Alec Berntson, Alissa Cooper, Steve Block, Greg Bolsinga, Aaron Boodman, Dave Burke, Chris Butler, Max Froumentin, Shyam Habarakada, Marcin Hanclik, Ian Hickson, Brad Lassey, Angel Machin, Cameron McCormack, Daniel Park, Stuart Parmenter, Olli Pettay, Chris Prince, Arun Ranganathan, Aza Raskin, Carl Reed, Thomas Roessler, Dirk Segers, Allan Thomson, Martin Thomson, Doug Turner, Erik Wilde, Mohamed Zergaoui

References

[AZALOC]
(Non-normative) Geolocation in Firefox and Beyond, Aza Raskin. See http://azarask.in/blog/post/geolocation-in-firefox-and-beyond
[BROWSINGCONTEXT]
The browsing context in HTML5, Ian Hickson, David Hyatt, Editors. World Wide Web Consortium. See http://www.w3.org/TR/2009/WD-html5-20090423/browsers.html#browsing-context
[DOCUMENTORIGIN]
The origin of a resource in HTML5, Ian Hickson, David Hyatt, Editors. World Wide Web Consortium. See http://www.w3.org/TR/2009/WD-html5-20090423/browsers.html#origin
[NAVIGATOR]
Navigator interface in HTML5, Ian Hickson, David Hyatt, Editors. World Wide Web Consortium. See http://www.w3.org/TR/2009/WD-html5-20090423/browsers.html#navigator
[DOMTIMESTAMP]
The DOMTimeStamp Type, Arnaud Le Hors, Philippe Le Hégaret, Gavin Nicol, Lauren Wood, Mike Champion, Steve Byrne, Editors. World Wide Web Consortium, 7 April 2004. See http://www.w3.org/TR/DOM-Level-3-Core/core.html#Core-DOMTimeStamp
[GEARSLOC]
(Non-normative) Gears Geolocation API. See http://code.google.com/p/gears/wiki/GeolocationAPI
[LOCATIONAWARE]
(Non-normative) LocationAware.org. See http://locationaware.org/
[RFC2119]
Key words for use in RFCs to Indicate Requirement Levels, Scott Bradner. Internet Engineering Task Force, March 1997. See http://www.ietf.org/rfc/rfc2119.txt
[RFC3066]
Tags for the Identification of Languages, Harald Tveit Alvestrand. Internet Engineering Task Force, January 2001. See http://www.ietf.org/rfc/rfc3066.txt
[WEBIDL]
Web IDL, Cameron McCormack, Editor. World Wide Web Consortium, 19 December 2008. See http://www.w3.org/TR/WebIDL/
[WGS84]
National Imagery and Mapping Agency Technical Report 8350.2, Third Edition. National Imagery and Mapping Agency, 3 January 2000. See http://earth-info.nga.mil/GandG/publications/tr8350.2/wgs84fin.pdf