13 Paged media

Contents

13.1 Introduction to paged media

Paged media (e.g., paper, transparencies, pages that are displayed on computer screens, etc.) differ from continuous media in that the content of the document is split into one or more discrete pages. To handle page breaks, CSS2 extends the visual rendering model as follows:

  1. The page box extends the box model to allow authors to specify the size of a page, its margins, etc.
  2. The page model extends the visual rendering layout model to account for page breaks.

The CSS2 page model specifies how a document is formatted within a rectangular area -- the page box -- that has a finite width and height. The page box does not necessarily correspond to the real sheet where the document will ultimately be rendered (paper, transparency, screen, etc.). The CSS page model specifies formatting in the page box, but it is the user agent's responsibility to transfer the page box to the sheet. Some transfer possibilities include:

Although CSS2 does not specify how user agents transfer page boxes to sheets, it does include certain mechanisms for telling user agents about the target sheet size and orientation.

13.2 Page boxes: the @page rule

The page box is a rectangular region that contains two embedded areas:

Note. In CSS2, the border properties and padding properties do not apply to pages; they may in the future.

Authors specify the dimensions, orientation, margins, etc. of a page box within an @page rule. An @page rule consists of the keyword "@page", a page selector, and a block of declarations (said to be in the page context).

The page selector specifies for which pages the declarations apply. In CSS2, page selectors may designate the first page, all left pages, all right pages, or a page with a specific name.

The dimensions of the page box are set with the 'size' property. The 'marks' property specifies crop and cross marks.

For example, the following @page rule sets the margins of the page to 2cm.

@page { margin: 2cm }

13.2.1 Page margins

The margin properties ('margin-top', 'margin-right', 'margin-bottom', 'margin-left', and 'margin') apply within the page context. The following diagram shows the relationships between the sheet, page box, and page margins:

Illustration of sheet, page box, and margin.

The actual value of element margins that fall at the top or bottom of a page is set to 0.

The page context has no notion of fonts, so 'em' and 'ex' units are not allowed. Percentage values on the margin properties are relative to the dimensions of the page box. All other units associated with the respective CSS2 properties are allowed.

Due to negative margin values (either on the page box or on elements) or absolute positioning content may end up outside the page box, but this content may be "cut" -- by the user agent, the printer, or ultimately, the paper cutter.

13.2.2 Page size: the 'size' property

'size'
Value:  <length>{1,2} | auto | portrait | landscape | inherit
Initial:  auto
Applies to:  page context
Inherited:  N/A
Percentages:  N/A
Media:  visual, paged

This property specifies the size and orientation of a page box.

The size of a page box may either be "absolute" (fixed size) or "relative" (scalable, i.e., fitting available sheet sizes). Relative page boxes allow user agents to scale a document and make optimal use of the target size.

Three values for the 'size' property create a relative page box:

auto
The page box will be set to the size and orientation of the target sheet.
landscape
Overrides the target's orientation. The page box is the same size as the target, and the longer sides are horizontal.
portrait
Overrides the target's orientation. The page box is the same size as the target, and the shorter sides are horizontal.

In the following example, the outer edges of the page box will align with the target. The percentage value on the 'margin' property is relative to the target size so if the target sheet dimensions are 21.0cm x 29.7cm (i.e., A4), the margins are 2.10cm and 2.97cm.

@page {
  size: auto;   /* auto is the initial value */
  margin: 10%;
}

Length values for the 'size' property create an absolute page box. If only one length value is specified, it sets both the width and height of the page box (i.e., the box is a square). Since the page box is the initial containing block, percentage values are not allowed for the 'size' property.

For example:

@page {
  size: 8.5in 11in;  /* width height */
}

The above example set the width of the page box to be 8.5in and the height to be 11in. The page box in this example requires a target sheet size of 8.5"x11" or larger.

User agents may allow users to control the transfer of the page box to the sheet (e.g., rotating an absolute page box that's being printed).

Rendering page boxes that do not fit a target sheet

If the page box does not fit the target sheet dimensions, the user agent may choose to:

The user agent should consult the user before performing these operations.

Positioning the page box on the sheet

When the page box is smaller than the target size, the user agent is free to place the page box anywhere on the sheet. However, it is recommended that the page box be centered on the sheet since this will align double-sided pages and avoid accidental loss of information that is printed near the edge of the sheet.

13.2.3 Crop marks: the 'marks' property

'marks'
Value:  [ crop || cross ] | none | inherit
Initial:  none
Applies to:  page context
Inherited:  N/A
Percentages:  N/A
Media:  visual, paged

In high-quality printing, marks are often added outside the page box. This property specifies whether cross marks or crop marks or both should be rendered just outside the page box edge.

Crop marks indicate where the page should be cut. Cross marks (also known as register marks or registration marks) are used to align sheets.

Marks are visible only on absolute page boxes (see the 'size' property). In relative page boxes, the page box will be aligned with the target and the marks will be outside the printable area.

The size, style, and position of cross marks depend on the user agent.

13.2.4 Left, right, and first pages

When printing double-sided documents, the page boxes on left and right pages should be different. This can be expressed through two CSS pseudo-classes that may be defined in the page context.

All pages are automatically classified by user agents into either the :left or :right pseudo-class.

@page :left {
  margin-left: 4cm;
  margin-right: 3cm;
}

@page :right {
  margin-left: 3cm;
  margin-right: 4cm;
}

If different declarations have been given for left and right pages, the user agent must honor these declarations even if the user agent does not transfer the page boxes to left and right sheets (e.g., a printer that only prints single-sided).

Authors may also specify style for the first page of a document with the :first pseudo-class:

@page { margin: 2cm } /* All margins set to 2cm */

@page :first {
  margin-top: 10cm    /* Top margin on first page 10cm */
}

Whether the first page of a document is :left or :right depends on the major writing direction of the document and is outside the scope of this document. However, to force a :left or :right first page, authors may insert a page break before the first generated box (e.g., in HTML, specify this for the BODY element).

Properties specified in a :left (or :right) @page rule override those specified in an @page rule that has no pseudo-class specified. Properties specified in a :first @page rule override those specified in :left (or :right) @page rules.

Note. Adding declarations to the :left or :right pseudo-class does not influence whether the document comes out of the printer double- or single-sided (which is outside the scope of this specification).

Note. Future versions of CSS may include other page pseudo-classes.

13.2.5 Content outside the page box

When formatting content in the page model, some content may end up outside the page box. For example, an element whose 'white-space' property has the value 'pre' may generate a box that is wider than the page box. Also, when boxes are positioned absolutely, they may end up in "inconvenient" locations. For example, images may be placed on the edge of the page box or 100,000 inches below the page box.

A specification for the exact formatting of such elements lies outside the scope of this document. However, we recommend that authors and user agents observe the following general principles concerning content outside the page box:

13.3 Page breaks

The following sections explain page formatting in CSS2. Five properties indicate where the user agent may or should break pages, and on what page (left or right) the subsequent content should resume. Each page break ends layout in the current page box and causes remaining pieces of the document tree to be laid out in a new page box.

13.3.1 Break before/after elements: 'page-break-before', 'page-break-after', 'page-break-inside'

'page-break-before'
Value:  auto | always | avoid | left | right | inherit
Initial:  auto
Applies to:  block-level elements
Inherited:  no
Percentages:  N/A
Media:  visual, paged
'page-break-after'
Value:  auto | always | avoid | left | right | inherit
Initial:  auto
Applies to:  block-level elements
Inherited:  no
Percentages:  N/A
Media:  visual, paged
'page-break-inside'
Value:  avoid | auto | inherit
Initial:  auto
Applies to:  block-level elements
Inherited:  yes
Percentages:  N/A
Media:  visual, paged

Values for these properties have the following meanings:

auto
Neither force nor forbid a page break before (after, inside) the generated box.
always
Always force a page break before (after) the generated box.
avoid
Avoid a page break before (after, inside) the generated box.
left
Force one or two page breaks before (after) the generated box so that the next page is formatted as a left page.
right
Force one or two page breaks before (after) the generated box so that the next page is formatted as a right page.

A potential page break location is typically under the influence of the parent element's 'page-break-inside' property, the 'page-break-after' property of the preceding element, and the 'page-break-before' property of the following element. When these properties have values other than 'auto', the values 'always', 'left', and 'right' take precedence over 'avoid'. See the section on allowed page breaks for the exact rules on how these properties may force or suppress a page break.

13.3.2 Using named pages: 'page'

'page'
Value:  <identifier> [ :left | :right ]? | auto
Initial:  auto
Applies to:  block-level elements
Inherited:  yes
Percentages:  N/A
Media:  visual, paged

The 'page' property can be used to specify a particular type of page where an element should be displayed.

By adding ':left' or ':right' the element can be forced to fall on a left or right page as well.

This example will put all tables on a right-hand side landscape page (named "rotated"):

@page rotated {size: landscape}
TABLE {page: rotated:right}

The 'page' property works as follows: If a block box with inline content has a 'page' property that is different from the preceding block box with inline content, then one or two page breaks are inserted between them, and the boxes after the break are rendered onto a page box of the named type. See "Forced page breaks" below.

In this example, the two tables are rendered on landscape pages (indeed, on the same page, if they fit), and the page type "narrow" is not used at all, despite having been set on the DIV:

@page narrow {size: 9cm 18cm}
@page rotated {size: landscape}
DIV {page: narrow}
TABLE {page: rotated}
with this document::
<DIV>
<TABLE>...</TABLE>
<TABLE>...</TABLE>
</DIV>

13.3.3 Breaks inside elements: 'orphans', 'widows', and 'page-break-inside'

'orphans'
Value:  <integer> | inherit
Initial:  2
Applies to:  block-level elements
Inherited:  yes
Percentages:  N/A
Media:  visual, paged
'widows'
Value:  <integer> | inherit
Initial:  2
Applies to:  block-level elements
Inherited:  yes
Percentages:  N/A
Media:  visual, paged

The 'orphans' property specifies the minimum number of lines of a paragraph that must be left at the bottom of a page. The 'widows' property specifies the minimum number of lines of a paragraph that must be left at the top of a page. Examples of how they are used to control page breaks are given below.

The 'page-break-inside' property can be used to turn off page breaking inside an element completely, i.e., keep the whole element on one page. The 'widows' and 'orphans' properties are not used if 'page-break-inside' is 'avoid'. However, if the element is larger than the page, so that it has to be broken, then the 'page-break-inside' property is ignored (treated as if it were 'auto') and page breaks are determined using the 'widows' and 'orphans' properties.

For information about paragraph formatting, please consult the section on line boxes.

13.3.4 Allowed page breaks

In the normal flow, page breaks can occur at the following places:

  1. In the vertical margin between block boxes. When a page break occurs here, the actual values of the relevant 'margin-top' and 'margin-bottom' properties are set to '0'.
  2. Between line boxes inside a block box.

These breaks are subject to the following rules:

If the above doesn't provide enough break points to keep content from overflowing the page boxes, then rules B and D are dropped in order to find additional breakpoints.

If that still does not lead to sufficient break points, rules A and C are dropped as well, to find still more break points.

Page breaks cannot occur inside boxes that are absolutely-positioned.

13.3.5 Forced page breaks

A page break must occur at (1) if, among the 'page-break-after' and 'page-break-before' properties of all the elements generating boxes that meet at this margin, there is at least one with the value 'always', 'left', or 'right'.

A page break must also occur at (1) if the last line box above this margin and the first one below it do not have the same value for 'page'.

13.3.6 "Best" page breaks

CSS2 does not define which of a set of allowed page breaks must be used; CSS2 does not forbid a user agent from breaking at every possible break point, or not to break at all. But CSS2 does recommend that user agents observe the following heuristics (while recognizing that they are sometimes contradictory):

Suppose, for example, that the style sheet contains 'orphans : 4', 'widows : 2', and there are 20 lines (line boxes) available at the bottom of the current page:

Now suppose that 'orphans' is '10', 'widows' is '20', and there are 8 lines available at the bottom of the current page:

13.4 Cascading in the page context

Declarations in the page context obey the cascade just like normal CSS2 declarations.

Consider the following example:

@page {
  margin-left: 3cm;
}

@page :left {
  margin-left: 4cm;
}

Due to the higher specificity of the pseudo-class selector, the left margin on left pages will be '4cm' and all other pages (i.e., the right pages) will have a left margin of '3cm'.