W3C

RIF Framework for Logic Dialects

W3C Editor's Draft 5 June 2009

This version:
http://www.w3.org/2005/rules/wg/draft/ED-rif-fld-20090605/
Latest editor's draft:
http://www.w3.org/2005/rules/wg/draft/rif-fld/
Editors:
Harold Boley, National Research Council, Canada
Michael Kifer, State University of New York at Stony Brook, USA

This document is also available in these non-normative formats: PDF version.



Abstract

This document, developed by the Rule Interchange Format (RIF) Working Group, defines a general RIF Framework for Logic Dialects (RIF-FLD). The framework describes mechanisms for specifying the syntax and semantics of logic RIF dialects through a number of generic concepts such as signatures, symbol spaces, semantic structures, and so on. The actual dialects should specialize this framework to produce their syntaxes and semantics.

Status of this Document

May Be Superseded

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

Summary of Changes

@@TDB

Last Call

The Working Group believes it has completed its design work for the technologies specified this document, so this is a "Last Call" draft. The design is not expected to change significantly, going forward, and now is the key time for external review, before the implementation phase.

Please Comment By 3 July 2009

The Rule Interchange Format (RIF) Working Group seeks public feedback on this Working Draft. Please send your comments to public-rif-comments@w3.org (public archive). If possible, please offer specific changes to the text that would address your concern. You may also wish to check the Wiki Version of this document and see if the relevant text has already been updated.

No Endorsement

Publication as a Working Draft does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

Patents

This document was produced by a group operating under the 5 February 2004 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.


Table of Contents

1 Overview of RIF-FLD

The RIF Framework for Logic Dialects (RIF-FLD) is a formalism for specifying all logic dialects of RIF, including the RIF Basic Logic Dialect [RIF-BLD] and [RIF-Core] (albeit not [RIF-PRD], as the latter is not a logic-based RIF dialect). RIF-FLD is a formalism in which both syntax and semantics are described through a number of mechanisms that are commonly used for various logic languages, but are rarely brought all together. Amalgamation of several different mechanisms is required because the framework must be broad enough to accommodate several different types of logic languages and because various advanced mechanisms are needed to facilitate translation into a common framework. RIF-FLD gives precise definitions to these mechanisms, but allows well-defined aspects to vary. The design of RIF envisions that future standard logic dialects will be based on RIF-FLD. Therefore, for any RIF dialect to become a standard, its development should start as a specialization of FLD and extensions to (or, deviations from) FLD should be justified.

The framework described in this document is very general and captures most of the popular logic rule languages found in Databases, Logic Programming, and on the Semantic Web. However, it is anticipated that the needs of future dialects might stimulate further evolution of RIF-FLD. In particular, future extensions might include a logic rendering of actions as found in production and reactive rule languages. This would support Semantic Web services languages such as [SWSL-Rules] and [WSML-Rules].

This document is mostly intended for the designers of future RIF dialects. All logic RIF dialects should be derived from RIF-FLD by specialization, as explained in Sections Syntax of a RIF Dialect as a Specialization of RIF-FLD and Semantics of a RIF Dialect as a Specialization of RIF-FLD. In addition to specialization, to lower the barrier of entry for their intended audiences, a dialect designer may choose to also specify the syntax and semantics in a direct, but equivalent, way, which does not require familiarity with RIF-FLD. For instance, the RIF Basic Logic Dialect [RIF-BLD] is specified by specialization from RIF-FLD and also directly, without relying on the framework. Thus, the reader who is only interested in RIF-BLD can proceed directly to that document.

RIF-FLD has the following main components:

Syntactic framework. The syntactic framework defines eleven types of RIF terms:

Terms are then used to define several types of RIF-FLD formulas. RIF dialects can choose to permit all or some of the aforesaid categories of terms. In addition, RIF-FLD introduces extension points, one of which allows the introduction of new kinds of terms. An extension point is a keyword that is not a syntactic construct per se, but a placeholder that is supposed to be replaced by specific syntactic constructs of an appropriate kind. RIF-FLD defines several types of extension points: symbols (NEWSYMBOL), connectives (NEWCONNECTIVE), quantifiers (NEWQUANTIFIER), aggregate functions (NEWAGGRFUNC), and terms (NEWTERM).

The syntactic framework also defines the following specialization mechanisms:

Semantic framework. This framework defines the notion of a semantic structure (also knows as interpretation in the literature [Enderton01, Mendelson97]). Semantic structures are used to interpret formulas and to define logical entailment. As with the syntax, this framework includes a number of mechanisms that RIF logic dialects can specialize to suit their needs. These mechanisms include:

XML serialization framework. This framework defines the general principles for mapping the presentation syntax of RIF-FLD to the concrete XML interchange format. This includes:

This specification is the latest draft of the RIF-FLD definition. Each RIF dialect that is derived from RIF-FLD will be described in its own document. The first such dialect, the RIF Basic Logic Dialect, is described in [RIF-BLD]. A core dialect, which is defined by further specializing RIF-BLD, is specified in [RIF-Core].

2 Syntactic Framework

The next subsection explains how to derive the presentation syntax of a RIF dialect from the presentation syntax of the RIF framework. The actual syntax of the RIF framework is given in subsequent subsections.

In the (normative) subsections 2 to 9, the presentation syntax is defined using "mathematical English," a special form of English for communicating mathematical definitions, examples, etc. In the non-normative final subsection EBNF Grammar for the Presentation Syntax of RIF-FLD, a grammar for a superset of the presentation syntax is given using Extended Backus–Naur Form (EBNF).


2.1 Syntax of a RIF Dialect as a Specialization of RIF-FLD

The presentation syntax for a RIF dialect can be obtained from the general syntactic framework of RIF by specializing the following parameters, which are defined later in this document:

  1. The alphabet of RIF-FLD can be restricted by omitting symbols; it can also be expanded by actualizing the extension points NEWSYMBOL, NEWCONNECTIVE, NEWQUANTIFIER, and NEWAGGRFUNC, i.e., by replacing them with zero or more actual symbols of the appropriate kind.
  2. An assignment of signatures to each constant and variable symbol.

    Signatures determine which terms in the dialect are well-formed and which are not.

    The exact way signatures are assigned depends on the dialect. An assignment can be explicit or implicit (for instance, derived from the context in which each symbol is used).

  3. The choice of the types of terms supported by the dialect.

    The RIF logic framework introduces the following types of terms:

    • constant
    • variable
    • positional
    • with named arguments
    • lists
    • equality
    • frame
    • class membership
    • subclass
    • aggregates
    • remote term reference
    • external
    • formulas

    A dialect might support all of these terms or just a subset. For instance, some dialects might not support terms with named arguments or frame terms or certain forms of external terms (e.g., external frames). A dialect might even support additional kinds of terms that are not listed above (for instance, typing terms of F-logic [KLW95]). This is done by actualizing the extension point NEWTERM, i.e., by replacing it with zero or more new kinds of terms.

  4. The choice of symbol spaces supported by the dialect.

    Symbol spaces determine the syntax of the constant symbols that are allowed in the dialect.

  5. The choice of the formulas supported by the dialect.

    RIF-FLD offers the following kinds of formula terms "out of the box":

    A dialect might support all of these formulas or it might impose various restrictions. For instance, the formulas allowed in the conclusion and/or premises of implications might be restricted (e.g., [RIF-BLD] essentially allows Horn rules only), certain types of quantification might be prohibited (e.g., [RIF-BLD] disallows existential quantification in the rule head), symmetric or default negation (or both) might not be allowed (as in RIF-BLD), etc. The Core subdialect of RIF-BLD disallows equality formulas in the conclusions of rules.

    More interestingly, dialects can introduce additional types of formulas by adding new connectives (e.g., classical implication or bi-implication) and quantifiers through actualizing the extension points NEWCONNECTIVE and NEWQUANTIFIER.

Note that although the presentation syntax of a RIF logic dialect is normative, since semantics is defined in terms of that syntax, the presentation syntax is not intended as a concrete syntax, and conformant systems are not required to implement it.


2.2 Alphabet

Definition (Alphabet). The alphabet of the presentation syntax of RIF-FLD consists of the following disjoint subsets of symbols:

The symbol Naf represents default negation, which is used in rule languages with logic programming and deductive database semantics. Examples of default negation include Clark's negation-as-failure [Clark87], the well-founded negation [GRS91], and stable-model negation [GL88]. The name of the symbol Naf used here comes from negation-as-failure but in RIF-FLD this can refer to any kind of default negation.

The symbol Neg represents symmetric negation (as opposed to default negation, which is asymmetric because completely different inference rules are used to derive p and Naf p). Examples of symmetric negation include classical first-order negation, explicit negation, and strong negation [APP96].

The symbols =, #, and ## are used in formulas that define equality, class membership, and subclass relationships, respectively. The symbol -> is used in terms that have named arguments and in frame terms. The symbol External indicates that an atomic formula or a function term is defined externally (e.g., a built-in), Dialect is a directive used to indicate the dialect of a RIF document (for those dialects that require this), the symbols Base and Prefix enable abridged representations of IRIs, and the symbol Import is an import directive. The Module directive is used to connect remote terms with the actual remote RIF documents.

Finally, the symbol Document is used for specifying RIF-FLD documents and the symbol Group is used to organize RIF-FLD formulas into collections.   ☐



2.3 Symbol Spaces

Throughout this document, we will be using the following abbreviations:

These and other abbreviations will be used as prefixes in the compact URI-like notation [CURIE], a notation for succinct representation of IRIs [RFC-3987]. The precise meaning of this notation in RIF is defined in [RIF-DTB].

The set of all constant symbols in a RIF dialect is partitioned into a number of subsets, called symbol spaces, which are used to represent XML Schema datatypes, datatypes defined in other W3C specifications, such as rdf:XMLLiteral, and to distinguish other sets of constants. All constant symbols have a syntax (and sometimes also semantics) imposed by the symbol space to which they belong.

Definition (Symbol space). A symbol space is a named subset of the set of all constants, Const. The semantic aspects of symbol spaces will be described in Section Semantic Framework. Each symbol in Const belongs to exactly one symbol space.

Each symbol space has an associated lexical space and a unique identifier. More precisely,

The identifiers for symbol spaces are not themselves constant symbols in RIF.   ☐

To simplify the language, we will often use symbol space identifiers to refer to the actual symbol spaces (for instance, we may use "symbol space xs:string" instead of "symbol space identified by xs:string").

To refer to a constant in a particular RIF symbol space, we use the following presentation syntax:

     "literal"^^symspace

where literal is called the lexical part of the symbol, and symspace is the identifier of the symbol space. Here literal is a sequence of Unicode characters that must be an element in the lexical space of the symbol space symspace. For instance, "1.2"^^xs:decimal and "1"^^xs:decimal are syntactically valid constants because 1.2 and 1 are members of the lexical space of the XML Schema datatype xs:decimal. On the other hand, "a+2"^^xs:decimal is not a syntactically valid symbol, since a+2 is not part of the lexical space of xs:decimal.

The set of all symbol spaces that partition Const is considered to be part of the logic language of RIF-FLD.

RIF requires that all dialects include the symbol spaces listed and described in Section Constants and Symbol Spaces of [RIF-DTB] as part of their language. These symbol spaces include constants that belong to several important XML Schema datatypes, certain RDF datatypes, and constant symbols specific to RIF. The latter include the symbol spaces rif:iri and rif:local, which are used to represent internationalized resource identifiers (IRIs [RFC-3987]) and constant symbols that are not visible outside of the RIF document in which they occur, respectively. Documents that are exchanged through RIF can use additional symbol spaces.

We will often refer to constant symbols that come from a particular symbol space, X, as X constants. For instance the constants in the symbol space rif:iri will be referred to as IRI constants or rif:iri constants and the constants found in the symbol space rif:local as local constants or rif:local constants.


2.4 Terms

The most basic construct of a logic language is a term. RIF-FLD supports many kinds of terms: constants, variables, the regular positional terms, plus terms with named arguments, equality, classification terms, frames, and more. The word "term" will be used to refer to any kind of term.

Definition (Term). A term can have one of the following forms:

  1. Constants and variables. If tConst or tVar then t is a simple term.
  2. Positional terms. If t and t1, ..., tn are terms then t(t1 ... tn) is a positional term.

    Positional terms in RIF-FLD generalize the regular notion of a term used in first-order logic. For instance, the above definition allows variables everywhere, as in ?X(?Y ?Z(?V "12"^^xs:integer)), where ?X, ?Y, ?Z, and ?V are variables. Even ?X("abc"^^xs:string ?W)(?Y ?Z(?V "33"^^xs:integer)) is a positional term (as in HiLog [CKW93]).

  3. Terms with named arguments. A term with named arguments is of the form t(s1->v1 ... sn->vn), where t, v1, ..., vn are terms, and s1, ..., sn are (not necessarily distinct) symbols from the set ArgNames.

    The term t here represents a predicate or a function; s1, ..., sn represent argument names; and v1, ..., vn represent argument values. Terms with named arguments are like regular positional terms except that the arguments are named and their order is immaterial. Note that a term with no arguments, like f(), is, trivially, both a positional term and a term with named arguments.

    For instance, "person"^^xs:string("http://example.com/name"^^rif:iri->?Y "http://example.com/address"^^rif:iri->?Z), ?X("123"^^xs:integer ?W)(arg->?Y arg2->?Z(?V)), and "Closure"^^rif:local("http://example.com/relation"^^rif:iri->"http://example.com/Flight"^^rif:iri)("from"^^rif:local->?X "to"^^rif:local->?Y) are terms with named arguments. The second of these named-argument terms uses a positional term, ?X("123"^^xs:integer ?W), in the role of the function, and the third term's function is itself represented by a named-argument term.

  4. List terms. There are two kinds of list terms: open and closed.

    A closed list of the form List() (i.e., a list in which m=0) is called the empty list.

  5. Equality terms. An equality term has the form t = s, where t and s are terms.
  6. Classification terms. There are two kinds of classification terms: class membership terms (or just membership terms) and subclass terms.

    Classification terms are used to describe class hierarchies.

  7. Frame terms. t[p1->v1 ... pn->vn] is a frame term (or simply a frame) if t, p1, ..., pn, v1, ..., vn, n ≥ 0, are terms.

    Frame terms are used to describe properties of objects. As in the case of the terms with named arguments, the order of the properties pi->vi in a frame is immaterial.

  8. Externally defined terms. If t is a constant, positional term, a term with named arguments, an equality, a classification, or a frame term then External(t loc) is an externally defined term.

    Such terms are used for representing built-in functions and predicates as well as "procedurally attached" terms or predicates, which might exist in various rule-based systems, but are not specified by RIF. The loc part in an external term is intended to play the role of a locator of the source that defines the external term t. It must uniquely identify the external source. The exact form of the locator loc, the protocol that associates locators with external sources, and the type of the imported documents is left to dialects to specify. However, all dialects must support the form <IRI>, where IRI is a sequence of Unicode characters that forms an IRI.

    This syntax enables very flexible representations for externally defined information sources: not only predicates and functions, but also frames, classification, and equality terms can be used. In this way, external sources can be modeled in an object-oriented way. For instance, External("http://example.com/acme"^^rif:iri["http://example.com/mycompany/president"^^rif:iri(?Year) -> ?Pres]   <http://example.com/acme>) could be a representation for an external method "http://example.com/mycompany/president"^^rif:iri in an external object identified by the IRI http://example.com/acme.

    Since, in most cases, external terms are expected to be based on predicates, RIF-FLD also permits a shorthand notation: If t is a positional or a named-argument term of the form p(...), then External(t) is considered to be a shorthand for External(t <p*>), where p* is the IRI corresponding to p (for instance, if p is "http://example.com/foobar"^^rif:iri then p* is http://example.com/foobar).

  9. Formula term. If S is a connective or a quantifier symbol and t1, ..., tn are terms then S(t1 ... tn) is a formula term.

    Formula terms correspond to compound formulas in logic, i.e., formulas that are constructed from atomic formulas by combining them with connectives and quantifiers. For better visual appeal, some connectives (e.g., rule implication, :-, and default negation, Naf) may be written in infix or prefix form (e.g., a :- b and Naf a), but the above function application form is considered to be canonical.

    Let φ be a formula term of the form S(t1 ... tn), where S is a quantifier, and let ?X1,...,?Xn be a list of variables bound by S. We say that all occurrences of these variables are bound in the formula term φ. In general, if τ is a term and ψ a formula term that occurs in τ then all occurrences of the variables that are bound in φ are also said to be bound in τ. The occurrences of variables in a term that are not bound are said to be free. A term that has no free occurrences of variables is closed.

  10. Aggregate term. An aggregate term has the form sym ?V[?X1 ... ?Xn](τ), where sym ?V[?X1 ... ?Xn] is an aggregate symbol, n≥0, and τ is a term. For readability, we will usually write aggregate terms as sym{?V [?X1 ... ?Xn] | τ}. If n=0, we will omit the [...] part. Note that aggregates can be nested, i.e., τ can contain aggregate terms.

    In addition, it is required that the variables ?V, ?X1, ..., ?Xn have free occurrences in τ, and all occurrences of other variables in τ are bound.

    The comprehension variable ?V and the grouping variables ?X1, ..., ?Xn of the symbol sym ?V[?X1 ... ?Xn] are also said to be the comprehension and grouping variables of the above aggregate term. The comprehension variable ?V is considered bound by the aggregation term, but the grouping variables ?X1, ..., ?Xn remain free.

    As a practical convenience, dialects may allow more general terms in place of the comprehension variable, similarly to Prolog's findall/3 built-in. In this case, sym{Term [?X1 ... ?Xn] | τ} is treated as a shorthand for sym{?V [?X1 ... ?Xn] | And(τ ?V=Term)}.

  11. Remote term reference. A remote term reference (also called remote term) is a term of the form φ@r where φ is a term other than a remote term; r is a constant, variable, a positional, or a named-argument term.

    Remote terms are used to query remote RIF documents, called remote modules. Here φ is the actual query and r is a reference used to identify the remote module. Remote terms should be contrasted with external terms, which are used to query external sources that are not RIF documents. Since remote terms refer to remote RIF documents, their semantics is defined by RIF-FLD. In contrast, external terms are used to query external opaque sources, which are not RIF documents. So, their semantics is opaque in RIF.

  12. NEWTERM. This is not a specific kind of term, but an extension point; dialects are supposed to replace it with zero or more new types of terms.   ☐

The above definitions are very general. They make no distinction between constant symbols that represent individuals, predicates, and function symbols. The same symbol can occur in multiple contexts at the same time. For instance, if p, a, and b are symbols then p(p(a) p(a p c)) is a term. Even variables and general terms are allowed to occur in the position of predicates and function symbols, so p(a)(?v(a c) p) is also a term.

Furthermore, the extensible set of quantifiers and connectives allows dialects to introduce additional features, which could include modal operators, bounded quantification, rule labels, and so on. For instance, to add labels to formulas, as required by some rule languages, a dialect could introduce a new connective, Label, and formulas of the form Label(t φ), where t could be a positional term and φ a formula term. (Note that RIF-FLD also supports a very general form of annotations, which can be used to assign identifiers to rules. However, annotations do not affect the semantics of RIF dialects, so they cannot be used to label rules in dialects where rule labels do affect the semantics. It is in those cases that RIF dialect designers might choose to introduce a special connective, like Label above.)

Frame, classification, and other terms can be freely nested, as exemplified by p(?X  q#r[p(1,2)->s](d->e f->g)). Some language environments, like FLORA-2 [FL2], OO jDREW [OOjD], NxBRE [NxBRE], and CycL [CycL] support fairly large (partially overlapping) subsets of RIF-FLD terms, but most languages support much smaller subsets. RIF dialects are expected to carve out the appropriate subsets of RIF-FLD terms, and the general form of the RIF logic framework allows a considerable degree of freedom.

Observe that the argument names of frame terms, p1, ..., pn, are terms and, as a special case, can be variables. In contrast, terms with named arguments can use only the symbols from ArgNames to represent their argument names. They cannot be constants from Const or variables from Var. The reason for this restriction has to do with the complexity of unification, which is integral part of many inference rules underlying first-order logic. We are not aware of any rule language where terms with named arguments use anything more general than what is defined here.

Dialects can restrict the contexts in which the various terms are allowed by using the mechanism of signatures. The RIF-FLD language associates a signature with each symbol (both constant and variable symbols) and uses signatures to define well-formed terms. Each RIF dialect is expected to select appropriate signatures for the symbols in its alphabet, and only the terms that are well-formed according to the selected signatures are allowed in that particular dialect.


Example 1 (Terms)


2.5 Schemas for Externally Defined Terms

This section introduces the notion of external schemas, which serve as templates for externally defined terms. These schemas determine which externally defined terms are acceptable in a RIF dialect. Externally defined terms include RIF built-ins, which are specified in [RIF-DTB], but are more general. They are designed to accommodate the ideas of procedural attachments and querying of external data sources. Because of the need to accommodate many different possibilities, the RIF logical framework supports a very general notion of an externally defined term. Such a term is not necessarily a function or a predicate -- it can be a frame, a classification term, and so on.

Definition (Schema for external term). An external schema has the form (?X1 ... ?Xn; τ;  loc) where

The names of the variables in an external schema are immaterial, but their order is important. For instance, (?X ?Y;  ?X["foo"^^xs:string->?Y]; loc) and (?V ?W;  ?V["foo"^^xs:string->?W]; loc) are considered to be indistinguishable, but (?X ?Y;  ?X["foo"^^xs:string->?Y]; loc) and (?Y ?X;  ?X["foo"^^xs:string->?Y]; loc) are viewed as different schemas.

An external term External(t loc1) is an instance of an external schema (?X1 ... ?Xn; τ; loc) iff loc1=loc and t can be obtained from τ by a simultaneous substitution ?X1/s1 ... ?Xn/sn of the variables ?X1 ... ?Xn with terms s1 ... sn, respectively. Some of the terms si can be variables themselves. For example, External(?Z["foo"^^xs:string->f("a"^^rif:local ?P)] loc) is an instance of (?X ?Y; ?X["foo"^^xs:string->?Y]; loc) by the substitution ?X/?Z  ?Y/f("a"^^rif:local ?P).    ☐

Observe that a variable cannot be an instance of an external schema, since τ in the above definition cannot be a variable. It will be seen later that this implies that a term of the form External(?X loc) is not well-formed in RIF.

The intuition behind the notion of an external schema, such as (?X ?Y;  ?X["foo"^^xs:string->?Y]  <http://example.com/acme>) and (?V;  pred:isTime(?V)"  <pred:isTime>), is that ?X["foo"^^xs:string->?Y] or pred:isTime(?V) are invocation patterns for querying external sources, and instances of those schemas correspond to concrete invocations. Thus, External("http://foo.bar.com"^^rif:iri["foo"^^xs:string->"123"^^xs:integer]"   <http://example.com/acme>) and External(pred:isTime("22:33:44"^^xs:time)"   <pred:isTime>) are examples of invocations of external terms -- one querying the external source identified by the IRI http://example.com/acme and the other invoking the built-in identified by the IRI pred:isTime.

Recall that one-argument externals, such as External(t) are shortcuts of two-argument externals. So, we define a one-argument external to be an instance of an external schema iff its corresponding two-argument form is an instance of that schema.

Definition (Coherent set of external schemas). A set Ε of external schemas is coherent if there is no term, t, that is an instance of two distinct schemas in Ε.    ☐

The intuition behind this notion is to ensure that any use of an external term is associated with at most one external schema. This assumption is relied upon in the definition of the semantics of externally defined terms. Note that the coherence condition is easy to verify syntactically and that it implies that schemas like (?X ?Y;  ?X["foo"^^xs:string->?Y]; loc) and (?Y ?X;  ?X["foo"^^xs:string->?Y]; loc), which differ only in the order of their variables, cannot be in the same coherent set.

It is important to keep in mind that external schemas are not part of the language in RIF, since they do not appear anywhere in RIF expressions. Instead, like signatures, which are defined below, they are best thought of as part of the grammar of the language. In particular, they will be used to determine which external terms, i.e., the terms of the form External(t loc) are well-formed.


2.6 Signatures

In this section we introduce the concept of a signature, which is a key mechanism that allows RIF-FLD to control the context in which the various symbols are allowed to occur. For instance, a symbol f with signature {(term term) => term, (term) => term} can occur in terms like f(a b), f(f(a b) a), f(f(a)), etc., if a and b have signature term. But f is not allowed to appear in the context f(a b a) because there is no =>-expression in the signature of f to support such a context.

The above example provides intuition behind the use of signatures in RIF-FLD. Much of the development, below, is inspired by [CK95]. It should be kept in mind that signatures are not part of the logic language in RIF, since they do not appear anywhere in RIF-FLD formulas. Instead they are part of the grammar: they are used to determine which sequences of tokens are in the language and which are not. The actual way by which signatures are assigned to the symbols of the language may vary from dialect to dialect. In some dialects (for example [RIF-BLD]), this assignment is derived from the context in which each symbol occurs and no separate language for signatures is used. Other dialects may choose to assign signatures explicitly. In that case, they would require a concrete language for signatures (which would be separate from the language for specifying the logic formulas of the dialect).

Definition (Signature name). Let SigNames be a non-empty, partially-ordered finite or countably infinite set of symbols, called signature names. Since signatures are not part of the logic language, their names do not have to be disjoint from Const, Var, and ArgNames. We require that this set includes at least the following reserved signature names:

Dialects may introduce additional signature names. For instance, RIF Basic Logic Dialect [RIF-BLD] introduces the signature name individual. The partial order on SigNames is dialect-specific; it is used in the definition of well-formed terms below.

We use the symbol < to represent the partial order on SigNames. Informally, α < β means that terms with signature α can be used wherever terms with signature β are allowed. We will write α ≤ β if either α = β or α < β.

Definition (Signature). A signature has the form η{e1, ..., en, ...} where ηSigNames is the name of the signature and {e1, ..., en, ...} is a countable set of arrow expressions. Such a set can thus be infinite, finite, or even empty. In RIF-BLD, signatures can have at most one arrow expression. Other dialects (such as one for HiLog [CKW93] and Relfun [RF99], for example) may require polymorphic symbols and thus allow signatures with more than one arrow expression in them.

An arrow expression is defined as follows:

RIF dialects are always associated with sets of coherent signatures, defined next. The overall idea is that a coherent set of signatures must include all the predefined signatures (such as signatures for equality and classification terms) and the signatures included in a coherent set must not conflict with each other. For instance, two different signatures should not have identical names and if one signature is said to extend another then the arrow expressions of the supersignature should be included among the arrow expressions of the subsignature (a kind of an arrow expression "inheritance").

Definition (Coherent signature set). A set Σ of signatures is coherent iff

  1. Σ contains the special signatures atomic{ } and formula{ }, which represent the context of atomic formulas and more generally, composite formulas, respectively. Furthermore, it is required that atomic < formula.
  2. Σ contains the special signature ∞-connective{e1, ..., en, ...}, where each en has the form (formula ... formula) ⇒ formula (the left-hand side of this signature is a sequence of n symbols formula). This signature is assigned to the connectives And and Or.
  3. Σ contains the special signature 2-connective{(formula formula) ⇒ formula}. This signature is assigned to the rule implication connective.
  4. Σ contains the signature 1-connective{(formula) ⇒ formula}. This signature is assigned to the negation connectives Naf and Neg, and to the reserved quantifiers of RIF-FLD, Exists?X1,...,?Xn and Forall?X1,...,?Xn, for all variable sequences ?X1,...,?Xn and n ≥ 0.
  5. Σ contains the signature ={e1, ..., en, ...} for the equality symbol.

    All arrow expressions ei here have the form (κ κ) ⇒ γ (the arguments in an equation must be compatible) and at least one of these expressions must have the form (κ κ) ⇒ atomic (i.e., equation terms are also atomic formulas). Dialects may further specialize this signature.

  6. Σ contains the signature #{e1, ..., en...} for membership terms.

    Here all arrow expressions ei are binary (have two arguments) and at least one has the form (κ γ) ⇒ atomic. Dialects may further specialize this signature.

  7. Σ contains the signature ##{e1, ..., en...} for subclass terms.

    Here all arrow expressions ei have the form (κ κ) ⇒ γ (the arguments must be compatible) and at least one of these arrow expressions has the form (κ κ) ⇒ atomic. Dialects may further specialize this signature.

  8. Σ contains the signature ->{e1, ..., en...} for frames.
  9. Σ contains the signatures list and openlist for representing list terms.
  10. Σ contains the signature aggregate{e1, e2, ...} for aggregate terms.

    Here each arrow expression ei has the form (formula) ⇒ κi, for some signatures κ1, κ2, ....

  11. Σ contains the signature remote{e1, e2, ...}, where at least one of the ei is an arrow expression of the form (formula κ) ⇒ formula for some signature κ. This signature is assigned to the remote term symbol @.
  12. Σ has at most one signature for any given signature name.
  13. Whenever Σ contains a pair of signatures, ηA and κB, such that η<κ then BA.

    Here ηA denotes a signature with the name η and the associated set of arrow expressions A; similarly κB is a signature named κ with the set of expressions B. The requirement that BA ensures that symbols that have signature η can be used wherever the symbols with signature κ are allowed.   ☐


The requirement that coherent sets of signatures must include the signatures for =, #, ->, and so on is just a technicality that simplifies definitions. Some of these signatures may go "unused" in a dialect even though, technically speaking, they must be present in the signature set associated with that dialect. If a dialect disallows equality, classification terms, or frames in its syntax then the corresponding signatures will remain unused. Such restrictions can be imposed by specializing RIF-FLD -- see Section Syntax of a RIF Dialect as a Specialization of RIF-FLD.

An incoherent set of signatures would be exemplified by one that includes signatures mysig{() ⇒ atomic} and mysig{(atomic) ⇒ atomic} because it has two different signatures with the same name. Likewise, if a set contains mysig1{() ⇒ atomic} and mysig2{(atomic) ⇒ atomic} and mysig1 < mysig1 then it is incoherent because the set of arrow expressions of mysig1 does not contain the set of arrow expressions of mysig2.


2.7 Presentation Syntax of a RIF Dialect

The presentation syntax of a RIF dialect is a set of well-formed formulas, as defined in the next section. The language is determined by the following parameters (see Syntax of a RIF Dialect as a Specialization of RIF-FLD):

We have already seen how the alphabet and the symbol spaces are used to define RIF terms. The next section shows how signatures and external schemas are used to further specialize this notion to define well-formed RIF-FLD terms.


2.8 Well-formed Terms and Formulas

Since signature names uniquely identify signatures in coherent signature sets, we will often refer to signatures simply by their names. For instance, if one of f's signatures is atomic{ }, we may simply say that symbol f has signature atomic.


Definition (Well-formed term).

  1. A constant or variable symbol with signature η is a well-formed term with signature η.
  2. A positional term t(t1 ... tn), 0≤n, is well-formed and has a signature σ iff
    • t is a well-formed term that has a signature that contains an arrow expression of the form 1 ... σn) ⇒ σ; and
    • Each ti is a well-formed term whose signature is γi such that γi, ≤ σi.

    As a special case, when n=0 we obtain that t() is a well-formed term with signature σ, if t's signature contains the arrow expression () ⇒ σ.

  3. A term with named arguments t(p1->t1 ... pn->tn), 0≤n, is well-formed and has a signature σ iff
    • t is a well-formed term that has a signature that contains an arrow expression with named arguments of the form (p1->σ1 ... pn->σn) ⇒ σ; and
    • Each ti is a well-formed term whose signature is γi, such that γi ≤ σi.

    As a special case, when n=0 we obtain that t() is a well-formed term with signature σ, if t's signature contains the arrow expression () ⇒ σ.

  4. An equality term of the form t1=t2 is well-formed and has a signature κ iff
    • The signature = has an arrow expression (σ σ) ⇒ κ
    • ti and t2 are well-formed terms with signatures γ1 and γ2, respectively, such that γi ≤ σ, i=1,2.
  5. A membership term of the form t1#t2 is well-formed and has a signature κ iff
    • The signature # has an arrow expression 1 σ2) ⇒ κ
    • t1 and t2 are well-formed terms with signatures γ1 and γ2, respectively, such that γi ≤ σi, i=1,2.
  6. A subclass term of the form t1##t2 is well-formed and has a signature κ iff
    • The signature ## has an arrow expression (σ σ) ⇒ κ
    • t1 and t2 are well-formed terms with signatures γ1 and γ2, respectively, such that γi ≤ σ, i=1,2.
  7. A frame term of the form t[s1->v1 ... sn->vn] is well-formed and has a signature κ iff
    • The signature -> has arrow expressions (σ σ11 σ12) ⇒ κ, ..., (σ σn1 σn2) ⇒ κ (these n expressions need not be distinct).
    • t, sj, and vj are well-formed terms with signatures γ, γj1, and γj2, respectively, such that γ ≤ σ and γji ≤ σji, where j=1,...,n and i=1,2.
  8. An externally defined term, External(t loc), is well-formed and has signature κ iff
  9. A formula term of the form S(t1 ... tn), 0≤n is well-formed if S is a connective or a quantifier whose signature has an arrow expression 1 ... σn) ⇒ formula and each ti is a well-formed term whose signature is ≤ σi.

    In the special case of our reserved connectives and quantifiers, t1, ..., tn must have signatures that are below formula (i.e., ≤ formula). Also, if S is :- then n must be equal 2 and if S is Neg, Naf, Forall, or Exists then n=1.

  10. An aggregate term of the form sym{?V [?X1 ... ?Xn] | τ} is well formed if the aggregate symbol sym ?V[?X1 ... ?Xn] is assigned signature aggregate and the term sym ?V[?X1 ... ?Xn](τ) is well-formed (as a positional term).

    This implies that τ must have the signature formula or < formula. Unless a dialect introduces additional signatures, this also means that τ must be a formula term (i.e., a compound formula) or an atomic formula (see below).

  11. A remote term of the form φ@r is well-formed if the positional term @(φ r) is well-formed. This implies that φ must be well-formed and have the signature formula, that r must a well-formed term, and that the term φ@r itself has the signature formula (and, possibly, others).

Note that, like the constant symbols, well-formed terms can have more than one signature. Also note that, according to the above definition, f() and f are distinct terms.


Definition (Well-formed formula). A well-formed atomic formula is a well-formed term one of whose signatures is atomic or < atomic. Note that equality, membership, subclass, and frame terms are atomic formulas, since atomic is one of their signatures. A well-formed formula is

Group and document formulas are defined below. For clarity, we will also give explicit definitions of conjunctive, disjunctive, rule, and other formulas even though they were already defined as special cases of the definition of well-formed formula terms (the first of the above bullets). Recall that all terms have a canonical function application form, but some are also written in a more familiar infix or prefix forms. For instance, rule implication, a :- b, has the canonical form :-(a b) and the canonical form for negation, Naf p and Neg p, is Naf(p) and Neg(p).

  1. Atomic: If φ is a well-formed atomic formula then it is also a well-formed formula.
  2. Remote: A well-formed remote term φ@r is also a well-formed formula.
  3. Conjunction: If φ1, ..., φn, n ≥ 0, are well-formed formula terms then so is And(φ1 ... φn).

    As a special case, And() is allowed and is treated as a tautology, i.e., a formula that is always true.

  4. Disjunction: If φ1, ..., φn, n ≥ 0, are well-formed formula terms then so is Or(φ1 ... φn).

    As a special case, Or() is treated as a contradiction, i.e., a formula that is always false.

  5. Symmetric negation: If φ is a well-formed formula term then so is Neg φ.
  6. Default negation: If φ is a well-formed formula term then so is Naf φ.
  7. Rule implication: If φ and ψ are well-formed formula terms then so is φ :- ψ.
  8. Universal and existential quantification: If φ is a well-formed formula term then

    are well-formed formula terms. Recall that Forall?V1,...,?Vn and Exists?V1,...,?Vn are the reserved universal and existential quantifiers, respectively. The notation Forall ?V1 ... ?Vn(φ) is an alternative for Forall?V1,...,?Vn(φ), and similarly for Exists.

  9. Group: If φ1, ..., φn are well-formed formula terms or Group-formulas then Group(φ1 ... φn) is a well-formed group formula.

    Group formulas are intended to represent sets of formulas. Note that some of the φi's can themselves be group formulas, which means that groups can be nested.

  10. Document: An expression of the form Document(directive1 ... directiven Γ) is a well-formed document formula, if

In the definition of a formula, the component formulas φ, φi, ψi, and Γ are said to be subformulas of the respective formulas (conjunction, disjunction, negation, implication, group, etc.) that are built using these components.   ☐

Observe that the restrictions in (1) -- (8) above imply that groups and documents cannot be nested inside formula terms and documents cannot be nested inside groups.


Example 2 (Signatures, well-formed terms and formulas).

We illustrate the above definitions with the following examples. In addition to atomic, let there be another signature, term{ }, which is intended here to represent the context of the arguments to positional function or atomic formulas.

Consider the term p(p(a) p(a b c)). If p has the (polymorphic) signature mysig{(term)⇒term, (term term)⇒term, (term term term)⇒term} and a, b, c each has the signature term{ } then p(p(a) p(a b c)) is a well-formed term with signature term{ }. If instead p had the signature mysig2{(term term)⇒term, (term term term)⇒term} then p(p(a) p(a b c)) would not be a well-formed term since then p(a) would not be well-formed (in this case, p would have no arrow expression which allows p to take just one argument).

For a more complex example, let r have the signature mysig3{(term)⇒atomic, (atomic term)⇒term, (term term term)⇒term}. Then r(r(a) r(a b c)) is well-formed. The interesting twist here is that r(a) is an atomic formula that occurs as an argument to a function symbol. However, this is allowed by the arrow expression (atomic term)⇒ term, which is part of r's signature. If r's signature were mysig4{(term)⇒atomic, (atomic term)⇒atomic, (term term term)⇒term} instead, then r(r(a) r(a b c)) would be not only a well-formed term, but also a well-formed atomic formula.

An even more interesting example arises when the right-hand side of an arrow expression is something other than term or atomic. For instance, let John, Mary, NewYork, and Boston have signatures term{ }; flight and parent have signature h2{(term term)⇒atomic}; and closure has signature hh1{(h2)⇒p2}, where p2 is the name of the signature p2{(term term)⇒atomic}. Then flight(NewYork Boston), closure(flight)(NewYork Boston), parent(John Mary), and closure(parent)(John Mary) would be well-formed formulas. Such formulas are allowed in languages like HiLog [CKW93], which support predicate constructors like closure in the above example.   ☐


2.9 Annotations in the Presentation Syntax

RIF-FLD allows every term and formula (including terms and formulas that occur inside other terms and formulas) to be optionally preceded by an annotation of the form (* id φ *) where id is a constant and φ is a RIF formula that is not a document-formula. Both items inside the annotation are optional. The id part represents the identifier of the term (or formula) to which the annotation is attached and φ is the rest of the annotation. RIF-FLD does not impose any restrictions on φ apart from what is stated above. This means that φ may include variables, function symbols, rif:local constants, and so on.

Document formulas with and without annotations will be referred to as RIF-FLD documents.

A convention is used to avoid a syntactic ambiguity in the above definition. For instance, in (* id φ *) t[w -> v] the annotation can be attributed to the term t or to the entire frame t[w -> v]. Similarly, for an annotated HiLog-like term of the form (* id φ *) f(a)(b,c), the annotation can be attributed to the entire term f(a)(b,c) or to just f(a). The convention adopted in RIF-FLD is that any annotation is syntactically associated with the largest RIF-FLD term or formula that appears to the right of that annotation. Therefore, in our examples the annotation (* id φ *) is considered to be attached to the entire frame t[w -> v] and to the entire term f(a)(b,c). Yet, since φ can be a conjunction, some conjuncts can be used to provide metadata targeted to the object part, t, of the frame. For instance, (* And(_foo[meta_for_frame->"this is an annotation for the entire frame"] _bar[meta_for_object->"this is an annotation for t" meta_for_property->"this is an annotation for w"] *) t[w -> v]. Generally, the convention associates each annotation to the largest term or formula it precedes.

We suggest to use Dublin Core, RDFS, and OWL properties for metadata, along the lines of Section 7.1 of [OWL-Reference]-- specifically owl:versionInfo, rdfs:label, rdfs:comment, rdfs:seeAlso, rdfs:isDefinedBy, dc:creator, dc:description, dc:date, and foaf:maker.


Example 3 (A RIF-FLD document with nested groups and annotations).

We illustrate formulas, including documents and groups, with the following complete example (with apologies to Shakespeare for the imperfect rendering of the intended meaning in logic). For better readability, we use the shortcut notation defined in [RIF-DTB]. The example also illustrates attachment of annotations.

 Document(
   Prefix(dc     <http://http://purl.org/dc/terms/>)
   Prefix(ex     <http://example.org/ontology#>)
   Prefix(hamlet <http://www.shakespeare-literature.com/Hamlet/>)
   
   (* hamlet:assertions hamlet:assertions[dc:title->"Hamlet" dc:creator->"Shakespeare"] *)
   Group(
      Exists ?X (And(?X # ex:RottenThing
                     ex:partof(?X <http://www.denmark.dk>)))
      Forall ?X (Or(hamlet:tobe(?X)  Naf hamlet:tobe(?X)))
      Forall ?X (And(Exists ?B (And(ex:has(?X ?B) ?B # ex:business))
                     Exists ?D (And(ex:has(?X ?D) ?D # ex:desire)))
                   :- ?X # ex:man)
      (* hamlet:facts *)
      Group(
         hamlet:Yorick # ex:poor
         hamlet:Hamlet # ex:prince
      )
   )
 )

Observe that the above set of formulas has a nested subset with its own annotation, hamlet:facts, which contains only a global IRI.   ☐

The following example illustrates the use of imported RIF documents and of remote terms.

Example 4 (A RIF-FLD document with imports, remote module references, and aggregation).

The first document, below, imports the second document, which is assumed to be located at the IRI http://example.org/universityontology. In addition, the first document has references to two remote modules, which are located at http://example.org/university#1 and http://example.org/university#2, respectively. These modules are assumed to be knowledge bases that provide the usual information about university enrollment, courses offered in different semesters, and so on. The rules corresponding to the remote modules are not shown, as they do not illustrate new features. In the simplest case, these knowledge bases can simply be sets of facts for the predicates/frames that supply the requisite information.

 Document(
   Prefix(u    <http://example.org/universityontology#>)
   Prefix(pred <http://www.w3.org/2007/rif-builtin-predicate#>)
   Import(<http://example.org/universityontology>)
   Module(univ(1) <http://example.org/university#1>)
   Module(univ(2) <http://example.org/university#2>)
 
   Group(
     Forall ?Stud ?Crs ?Semester ?U (u:takes(?Stud ?Crs ?Semester) :-
                                        ?Stud[u:takes(?Semester)->?Crs]@univ(?U))
     Forall ?Prof ?Crs ?Semester ?U (u:teaches(?Prof ?Crs ?Semester) :-
                                        u:teaches(?Prof ?Crs ?Semester)@univ(?U))
     Forall ?Crs (u:popular_course(?Crs) :-
                      And(?Crs#Course
                          pred:numeric-less-than(500
                                                 count{?Stud[?Crs]|Exists ?Semester (u:takes(?Stud ?Crs ?Semester))})))
   )
 )

The imported document located at http://example.org/universityontology has the following form:

 Document(
   Group(
     Forall ?Stud ?Prof ?Sem
               (u:studentOf(?Stud ?Prof) :-
                       And(u:takes(?Stud ?Crs ?Sem) u:teaches(?Prof ?Crs ?Sem)))
   )
 )

In this example, the main document contains three rules, which define the predicates u:takes, u:teaches and u:popular_course. The information for the first two predicates is obtained by querying the remote modules corresponding to Universities 1 and 2. Inside the document, these modules are refered to via the terms univ(1) and univ(2). The Module directives tie these references to the actual locations. Note that the remote modules use frames to represent the enrollment information and predicates to represent course offerings. The rules in the main document convert both of these representations to predicates. The third rule illustrates a use of aggregation. The comprehension variable here is ?Stud and ?Crs is a grouping variable. Note that these are the only free variables in the formula over which aggregation is computed. For each course, the aggregate counts the number of students in that course over all semesters, and if the number exceeds 500 then the course is declared popular. Note also that the comprehension variable ?Stud is bound by the aggregate, so it is not quantified in the Forall-prefix of the rule.

The imported document has only one rule, which defines a new concept, u:studentOf. Since the main document imports the second document, it can answer queries about u:studentOf as if this concept were defined directly within the main document.   ☐


2.10 EBNF Grammar for the Presentation Syntax of RIF-FLD

Until now, to specify the syntax of RIF-FLD we relied on "mathematical English," a special form of English for communicating mathematical definitions, examples, etc. We will now specify the syntax using the familiar EBNF notation. The following points about the EBNF notation should be kept in mind:

Keeping the above in mind, the EBNF grammar can be seen as just an intermediary between the mathematical English and the XML. However, it also gives a succinct view of the syntax of RIF-FLD and as such can be useful for dialect designers and users alike.


  Document       ::= IRIMETA? 'Document' '(' Dialect? Base? Prefix* Import* Module* Group? ')'
  Dialect        ::= 'Dialect' '(' Name ')'
  Base           ::= 'Base' '(' ANGLEBRACKIRI ')'  
  Prefix         ::= 'Prefix' '(' Name ANGLEBRACKIRI ')'
  Import         ::= IRIMETA? 'Import' '(' LOCATOR PROFILE? ')'
  Module         ::= IRIMETA? 'Module' '(' (Const | Expr) LOCATOR ')'
  Group          ::= IRIMETA? 'Group' '(' (FORMULA | Group)* ')'
  Implies        ::= IRIMETA? FORMULA ':-' FORMULA
  FORMULA        ::= Implies |
                     IRIMETA? CONNECTIVE '(' FORMULA* ')' |
                     IRIMETA? QUANTIFIER '(' FORMULA ')' |
                     IRIMETA? 'Neg' FORMULA |
                     IRIMETA? 'Naf' FORMULA |
                     IRIMETA?  FORMULA '@' MODULEREF |
                     FORM
  PROFILE        ::= ANGLEBRACKIRI
  FORM           ::= IRIMETA? (Var | ATOMIC |
                               'External' '(' ATOMIC LOCATOR? ')')
  ATOMIC         ::= Const | Atom | Equal | Member | Subclass | Frame
  Atom           ::= UNITERM
  UNITERM        ::= TERMULA '(' (TERMULA* | (Name '->' TERMULA)*) ')'
  Equal          ::= TERMULA '=' TERMULA
  Member         ::= TERMULA '#' TERMULA
  Subclass       ::= TERMULA '##' TERMULA
  Frame          ::= TERMULA '[' (TERMULA '->' TERMULA)* ']'
  TERMULA        ::= Implies |
                     IRIMETA? CONNECTIVE '(' TERMULA* ')' |
                     IRIMETA? QUANTIFIER '(' TERMULA ')' |
                     IRIMETA? 'Neg' TERMULA |
                     IRIMETA? 'Naf' TERMULA |
                     IRIMETA? TERMULA '@' MODULEREF |
                     TERM
  TERM           ::= IRIMETA? (Var | EXPRIC | List |
                               'External' '(' EXPRIC LOCATOR? ')' |
                               AGGREGATE | NEWTERM)
  EXPRIC         ::= Const | Expr | Equal | Member | Subclass | Frame
  Expr           ::= UNITERM
  List           ::= 'List' '(' TERM* ')' | 'List' '(' TERM+ '|' TERM ')'
  AGGREGATE      ::= AGGRFUNC '{' Var ('[' Var+ ']')? '|' FORMULA '}'
  Const          ::= '"' UNICODESTRING '"^^' SYMSPACE | CONSTSHORT
  MODULEREF      ::= Var | Const | Expr
  CONNECTIVE     ::= 'And' | 'Or' | NEWCONNECTIVE
  QUANTIFIER     ::= ('Exists' | 'Forall' | NEWQUANTIFIER) Var*
  AGGRFUNC       ::= 'Min' | 'Max' | 'Sum' | 'Prod' | 'Avg' | 'Count' |
                     'Set' | 'Bag' | NEWAGGRFUNC
  Name           ::= UNICODESTRING
  Var            ::= '?' UNICODESTRING
  SYMSPACE       ::= ANGLEBRACKIRI | CURIE
  
  IRIMETA        ::= '(*' Const? (Frame | 'And' '(' Frame* ')')? '*)'

The RIF-FLD presentation syntax does not commit to any particular vocabulary and permits arbitrary sequences of Unicode characters in constant symbols, argument names, and variables. Such sequences are denoted with UNICODESTRING in the above syntax. Constant symbols have this form: "UNICODESTRING"^^SYMSPACE, where SYMSPACE is a ANGLEBRACKIRI or CURIE that represents the identifier of the symbol space of the constant, and UNICODESTRING is a Unicode string from the lexical space of that symbol space. ANGLEBRACKIRI and CURIE are defined in Section Shortcuts for Constants in RIF's Presentation Syntax of [RIF-DTB]. Constant symbols can also have several shortcut forms, which are represented by the non-terminal CONSTSHORT. These shortcuts are also defined in the same section of [RIF-DTB]. One of them is the CURIE shortcut, which is used in the examples in this document. Names are Unicode character sequences. Variables are composed of UNICODESTRING symbols prefixed with a ?-sign.

LOCATOR, which is used in several places in the grammar, is a non-terminal whose definition is left to the dialects. It is intended to specify the protocol by which external sources, remote modules, and imported RIF documents are located. This must include the basic form <IRI>, where IRI is a Unicode string in the form of an absolute IRI.

The symbols NEWCONNECTIVE, NEWQUANTIFIER, NEWAGGRFUNC, and NEWTERM are RIF-FLD extension points. They are not actual symbols in the alphabet. Instead, dialects are supposed to replace NEWCONNECTIVE, NEWQUANTIFIER, and NEWAGGRFUNC, by zero or more actual new symbols, while NEWTERM is to be replaced by zero or more new kinds of terms. Note that the extension point NEWSYMBOL is not shown in the EBNF grammar, since the grammar completely avoids mentioning the alphabet of the language (which is infinite).


RIF-FLD formulas and terms can be prefixed with optional annotations, IRIMETA, for identification and metadata. IRIMETA is represented using (*...*)-brackets that contain an optional rif:iri constant as identifier followed by an optional Frame or conjunction of Frames as metadata. One such specialization is '"' IRI '"^^' 'rif:iri' from the Const production, where IRI is a sequence of Unicode characters that forms an internationalized resource identifier as defined by [RFC-3987].

Note that the RIF-FLD presentation syntax (as reflected in the above EBNF grammar) strives to have a more familiar look by avoiding some of the formal parts of the syntax defined in Sections Alphabet and Terms. For instance, as mentioned in those sections, the quantifier symbols Exists?X1,...,?Xn and Forall?X1,...,?Xn are linearized as Exists ?X1,...,?Xn and Forall ?X1,...,?Xn. Likewise, the symbol OpenList is not used. Instead, open lists are written using the more familiar form LIST(Head|Tail). Also, some connectives, such as :-, are written in infix form. Other connectives, such as Neg and Naf, are written in prefix form without parentheses.


3 Semantic Framework

Recall that the presentation syntax of RIF-FLD allows the use of shorthand notation, which is specified via the Prefix and Base directives, and various shortcuts for integers, strings, and rif:local symbols. The semantics, below, is described using the full syntax, i.e., we assume that all shortcuts have already been expanded, as defined in [RIF-DTB], Section Constants and Symbol Spaces.

3.1 Semantics of a RIF Dialect as a Specialization of RIF-FLD

The RIF-FLD semantic framework defines the notions of semantic structures and of models for RIF-FLD formulas. The semantics of a dialect is derived from these notions by specializing the following parameters.

  1. The effect of the syntax.
  2. Truth values.

    The RIF-FLD semantic framework allows formulas to have truth values from an arbitrary partially ordered set of truth values, TV. A concrete dialect must select a concrete partially or totally ordered set of truth values.

  3. Datatypes.

    A datatype is a symbol space whose symbols have a fixed interpretation in any semantic structure. RIF-FLD defines a set of core datatypes that each dialect is required to include as part of its syntax and semantics. However, RIF-FLD does not limit dialects to just the core types: they can introduce additional datatypes, and each dialect must define the exact set of datatypes that it includes.

  4. Logical entailment.

    Logical entailment in RIF-FLD is defined with respect to an unspecified set of intended semantic structures. A RIF dialect must define which semantic structures should considered intended. For instance, one dialect might specify that all semantic structures are intended (which leads to classical first-order entailment), another may consider only the minimal models as intended structures, while a third one might only use well-founded or stable models [GRS91, GL88].

These notions are defined in the remainder of this specification.


3.2 Truth Values

Definition (Set of truth values). Each RIF dialect must define the set of truth values, denoted by TV. This set must have a partial order, called the truth order, denoted <t. In some dialects, <t can be a total order. We write at b if either a <t b or a and b are the same element of TV. In addition,

RIF dialects can have additional truth values. For instance, the semantics of some versions of NAF, such as well-founded negation, requires three truth values: t, f, and u (undefined), where f <t u <t t. Handling of contradictions and uncertainty usually requires at least four truth values: t, u, f, and i (inconsistent). In this case, the truth order is partial: f <t u <t t and f <t i <t t. The negation operator ~ is then defined to be the identity on the new truth values u and i.


3.3 Datatypes

Definition (Datatype). A datatype is a symbol space that has

Semantic structures are always defined with respect to a particular set of datatypes, denoted by DTS. In a concrete dialect, DTS always includes the datatypes supported by that dialect. All RIF dialects must support the datatypes that are listed in Section Datatypes of [RIF-DTB]. Their value spaces and the lexical-to-value-space mappings for these datatypes are described in the same section.


Although the lexical and the value spaces might sometimes look similar, one should not confuse them. Lexical spaces define the syntax of the constant symbols in the RIF language. Value spaces define the meaning of the constants. The lexical and the value spaces are often not even isomorphic. For example, 1.2^^xs:decimal and 1.20^^xs:decimal are two legal -- and distinct -- constants in RIF because 1.2 and 1.20 belong to the lexical space of xs:decimal. However, these two constants are interpreted by the same element of the value space of the xs:decimal type. Therefore, 1.2^^xs:decimal = 1.20^^xs:decimal is a RIF tautology. Likewise, RIF semantics for datatypes implies certain inequalities. For instance, abc^^xs:stringabcd^^xs:string is a tautology, since the lexical-to-value-space mapping of the xs:string type maps these two constants into distinct elements in the value space of xs:string.


3.4 Semantic Structures

The central step in specifying a model-theoretic semantics for a logic-based language is defining the notion of a semantic structure. Semantic structures are used to assign truth values to RIF-FLD formulas.

Definition (Semantic structure). A semantic structure, I, is a tuple of the form <TV, DTS, D, IC, IV, IF, INF, Ilist, Itail, Iframe, Isub, Iisa, I=, Iexternal, Iconnective, Itruth>. Here D is a non-empty set of elements called the domain of I. We will continue to use Const to refer to the set of all constant symbols and Var to refer to the set of all variable symbols. TV denotes the set of truth values that the semantic structure uses and DTS is a set of identifiers for datatypes.

The other components of I are total mappings defined as follows:

  1. IC maps Const to elements of D.

    This mapping interprets constant symbols.

  2. IV maps Var to elements of D.

    This mapping interprets variable symbols.

  3. IF maps D to functions D*D (here D* is a set of all finite sequences over the domain D).

    This mapping interprets positional terms.

  4. INF interprets terms with named arguments. It is a total mapping from D to the set of total functions of the form SetOfFiniteBags(ArgNames × D) → D.

    This is analogous to the interpretation of positional terms with two differences:

  5. Ilist and Itail are used to interpret lists. They are mappings of the following form:

    In addition, these mappings are required to satisfy the following conditions:

    Note that the last condition above restricts Itail only when its last argument is in Dlist. If the last argument of Itail is not in Dlist, then the list is a general open one and there are no restrictions on the value of Itail except that it must be in D.

  6. Iframe is a total mapping from D to total functions of the form SetOfFiniteBags(D × D) → D.

    This mapping interprets frame terms. An argument, dD, to Iframe represents an object and a finite bag {<a1,v1>, ..., <ak,vk>} represents a bag (multiset) of attribute-value pairs for d. We will see shortly how Iframe is used to determine the truth valuation of frame terms.

    Bags are employed here because the order of the attribute/value pairs in a frame is immaterial and the pairs may repeat. For instance, o[a->b a->b]. Such repetitions arise naturally when variables are instantiated with constants. For instance, o[?A->?B ?C->?D] becomes o[a->b a->b] if variables ?A and ?C are instantiated with the symbol a and ?B, ?D with b. (We shall see later that o[a->b a->b] is equivalent to o[a->b].)

  7. Isub gives meaning to the subclass relationship. It is a total function D × DD.

    The operator ## is required to be transitive, i.e., c1 ## c2 and c2 ## c3 must imply c1 ## c3. This is ensured by a restriction in Section Interpretation of Formulas.

  8. Iisa gives meaning to class membership. It is a total function D × DD.

    The relationships # and ## are required to have the usual property that all members of a subclass are also members of the superclass, i.e., o # cl and cl ## scl must imply o # scl. This is ensured by a restriction in Section Interpretation of Formulas.

  9. I= is a total function D × DD.

    It gives meaning to the equality operator.

  10. Itruth is a total mapping DTV.

    It is used to define truth valuation for formulas.

  11. Iexternal is a mapping from the coherent set of schemas for externally defined terms to total functions D* → D. For each external schema σ = (?X1 ... ?Xn; τ; loc) in the coherent set of such schemas associated with the language, Iexternal(σ) is a function of the form DnD.

    For every external schema, σ, associated with the language, Iexternal(σ) is assumed to be specified externally in some document (hence the name external schema). In particular, if σ is a schema of a RIF built-in predicate or function, Iexternal(σ) is specified in [RIF-DTB] so that:

  12. Iconnective is a mapping that assigns every connective, quantifier, or aggregate symbol a function D*D.

    Further restrictions on the interaction of this function with Itruth will be imposed in order to ensure the intended semantics for each connective and quantifier. For aggregates, Iconnective maps them to functions DD and additional restrictions are imposed on the mapping I defined below.

We also define the following term-interpreting mapping on well-formed terms, which we denote using the same symbol I that is used for the semantic structure itself. This overloading is convenient and does not lead to ambiguity.

  1. I(k) = IC(k), if k is a symbol in Const
  2. I(?v) = IV(?v), if ?v is a variable in Var
  3. I(f(t1 ... tn)) = IF(I(f))(I(t1),...,I(tn))
  4. I(f(s1->v1 ... sn->vn)) = INF(I(f))({<s1,I(v1)>,...,<sn,I(vn)>})

    Here we use {...} to denote a bag of argument/value pairs.

  5. For list terms, the mapping is defined as follows:
  6. I(o[a1->v1 ... an->vn]) = Iframe(I(o))({<I(a1),I(v1)>, ..., <I(an),I(vn)>})

    Here {...} denotes a bag of attribute/value pairs. Jumping ahead, we note that duplicate elements in such a bag do not affect the value of Iframe(I(o)) -- see Section Interpretation of Non-document Formulas. For instance, I(o[a->b a->b]) = I(o[a->b]).

  7. I(c1##c2) = Isub(I(c1), I(c2))
  8. I(o#c) = Iisa(I(o), I(c))
  9. I(x=y) = I=(I(x), I(y))
  10. I(External(t loc)) = Iexternal(σ)(I(s1), ..., I(sn)), if External(t loc) is an instance of the external schema σ = (?X1 ... ?Xn; τ; loc) by substitution ?X1/s1 ... ?Xn/sn.

    Note that, by definition, External(t loc) is well-formed only if it is an instance of an external schema. Furthermore, by the definition of coherent sets of external schemas, it can be an instance of at most one such schema, so I(External(t loc)) is well-defined.

  11. If S is a connective, a quantifier, or an aggregate and S(t1 ... tn) is a well-formed formula term (for an aggregate, n=1) then

    I(S(t1 ... tn)) = Iconnective(S)(I(t1) ... I(tn))

  12. For standard aggregates, the mapping I is defined as follows.

    Let aggr{?X [?X1 ... ?Xn] | τ} be an aggregate and let S be the following set:

    S = {(IV*(?X),IV*(?X1), ..., IV*(?Xn)) | for all semantic structures I* such that I*(τ) = t and I* is exactly like I except that IV*(?X) can be different from IV(?X)}.

    In addition, let Sset denote the set of all elements x such that (x,x1, ..., xn) ∈ S and Sbag denote the bag of all such elements x (i.e., Sbag can have repeated occurrences of the same element).

    1. Set aggregate:
      • I(set{?X [?X1 ... ?Xn] | τ}) = Ilist(L)

        where L is a sorted list of the elements in Sset. Since sorting requires an ordering, the above is well-defined only for semantic structures with totally ordered domains. If L is infinite then the value of the aggregate in I is indeterminate (i.e., it can be any element of the domain D).

        The requirement that the list L must be sorted comes from the fact that there can be many ways to represent Sset as a list, while I(set{?X [?X1 ... ?Xn] | τ}) must be defined as one concrete element of the domain D. Sorting a set is a standard way of providing the requisite unique representation.

    2. Bag aggregate:
      • I(bag{?X [?X1 ... ?Xn] | τ}) = Ilist(L)

        where L is a sorted list of the elements in Sbag. This is well-defined only for semantic structures with totally ordered domains. If L is infinite then the value of the aggregate in I is indeterminate (i.e., it can be any element of the domain D).

        The reason for sorting L is the same as in the case of the set aggregate.

    3. Min aggregate:
      • I(min{?X [?X1 ... ?Xn] | τ}) = min(Sbag), if the function min is defined for Sbag in the dialect. If not, the value of the aggregate in I is indeterminate. The bag Sbag must have a well-defined total order and min must compute the minimum elements of finite totally ordered bags.
    4. Max aggregate:
      • I(max{?X [?X1 ... ?Xn] | τ}) = max(Sbag), if the function max is defined for Sbag in the dialect. If not, the value of the aggregate in I is indeterminate. The bag Sbag must have a well-defined total order and max must compute the maximum elements of finite totally ordered bags.
    5. Count aggregate:
      • I(count{?X [?X1 ... ?Xn] | τ}) = count(Sbag), if the function count is defined for Sbag in the dialect. If not, the value of the aggregate in I is indeterminate. The function count must compute the cardinality of finite bags.
    6. Sum aggregate:
      • I(sum{?X [?X1 ... ?Xn] | τ}) = sum(Sbag), if the function sum is defined for Sbag in the dialect. If not, the value of the aggregate in I is indeterminate. The function sum must compute summations of the elements of finite bags. (For decimals, integers, floats, etc., summation must coincide with the usual notion. However, this function might also be defined for other domains in some dialects.)
    7. Prod aggregate:
      • I(prod{?X [?X1 ... ?Xn] | τ}) = prod(Sbag), if the function prod is defined for Sbag in the dialect. If not, the value of the aggregate in I is indeterminate. The function prod must compute products of the elements of finite bags. (For decimals, integers, floats, etc., product must coincide with the usual notion. However, this function might also be defined for other domains.)
    8. Avg aggregate:
      • I(avg{?X [?X1 ... ?Xn] | τ}) = avg(Sbag), if the function avg is defined for Sbag in the dialect. If not, the value of the aggregate in I is indeterminate. The function avg must compute averages (arithmetic means) of the elements of finite bags. (For decimals, integers, floats, etc., average must coincide with the usual notion. However, this function might also be defined for other domains.)
  13. For remote terms of the form φ@r, the mapping I is defined in Section Interpretation of Documents.

The effect of signatures. For every signature, sg, supported by a dialect, there is a subset DsgD, called the domain of the signature. Terms that have a given signature, sg, must be mapped by I to Dsg, and if a term has more than one signature it must be mapped into the intersection of the corresponding signature domains. To ensure this, the following is required:

  1. If sg < sg' then DsgDsg'.
  2. If k is a constant that has signature sg then IC(k) ∈ Dsg.
  3. If ?v is a variable that has signature sg then IV(?v) ∈ Dsg.
  4. If sg has an arrow expression of the form (s1 ... sn)⇒s then, for every dDsg, IF(d) must map Ds1× ... ×Dsn to Ds.
  5. If sg has an arrow expression of the form (p1->s1 ... pn->sn)⇒s then, for every dDsg, INF(d) must map the set {<p1,Ds1>, ..., <pn,Dsn>} to Ds.
  6. If the signature -> has arrow expressions (sg,s1,r1)⇒k, ..., (sg,sn,rn)⇒k, then, for every dDsg, Iframe(d) must map {<Ds1,Dr1>, ..., <Dsn,Drn>} to Dk.
  7. If the signature # has an arrow expression (s r)⇒k then Iisa must map Ds×Dr to Dk.
  8. If the signature ## has an arrow expression (s s)⇒k then Isub must map Ds×Ds to Dk.
  9. If the signature = has an arrow expression (s s)⇒k then I= must map Ds×Ds to Dk.

The effect of datatypes. The datatype identifiers in DTS impose the following restrictions. If dtDTS, let LSdt denote the lexical space of dt, VSdt denote its value space, and Ldt: LSdtVSdt the lexical-to-value-space mapping. Then the following must hold:

That is, IC must map the constants of a datatype dt in accordance with Ldt.   ☐

RIF-FLD does not impose special requirements on IC for constants in the symbol spaces that do not correspond to the identifiers of the datatypes in DTS. Dialects may have such requirements, however. An example of such a restriction could be a requirement that no constant in a particular symbol space (such as rif:local) can be mapped to VSdt of a datatype dt.


3.5 Annotations and the Formal Semantics

RIF-FLD annotations are stripped before the mappings that constitute RIF-FLD semantic structures are applied. Likewise, they are stripped before applying the truth valuation, TValI, defined in the next section. Thus, identifiers and metadata have no effect on the formal semantics.

Note that although annotations associated with RIF-FLD formulas are ignored by the semantics, they can be extracted by XML tools. Since annotations are represented by frame terms, they can be reasoned with by the rules. The frame terms used to represent metadata can then be fed to other formulas, thus enabling reasoning about metadata. However, RIF does not define any concrete semantics for metadata.


3.6 Interpretation of Non-document Formulas

This section defines how a semantic structure, I, determines the truth value TValI(φ) of a RIF-FLD formula, φ, where φ is any formula other than a document formula or a remote formula. Truth valuation of document formulas is defined in the next section.

To this end, we define a mapping, TValI, from the set of all non-document formulas to TV. Note that the definition implies that TValI(φ) is defined only if the set DTS of the datatypes of I includes all the datatypes mentioned in φ.


Definition (Truth valuation). Truth valuation for well-formed formulas in RIF-FLD is determined using the following function, denoted TValI:

  1. Constants: TValI(k) = Itruth(I(k)), if kConst.
  2. Variables: TValI(?v) = Itruth(I(?v)), if ?vVar.
  3. Positional atomic formulas: TValI(r(t1 ... tn)) = Itruth(I(r(t1 ... tn))).
  4. Atomic formulas with named arguments: TValI(p(s1->v1 ... sk->vk)) = Itruth(I(p(s1-> v1 ... sk->vk))).
  5. Equality: TValI(x = y) = Itruth(I(x = y)).

    To ensure that equality has precisely the expected properties, it is required that

    • Itruth(I(x = y)) = t if I(x) = I(y) and that Itruth(I(x = y)) = f otherwise.
  6. Subclass: TValI(sc ## cl) = Itruth(I(sc ## cl)).

    To ensure that the operator ## is transitive, i.e., c1 ## c2 and c2 ## c3 imply c1 ## c3, the following is required:

    • For all c1, c2, c3D,   glbt(TValI(c1 ## c2), TValI(c2 ## c3))  ≤t  TValI(c1 ## c3).

    Note that this is a restriction on Itruth and the mapping I, which is expressed in a more succinct form using TValI.

  7. Membership: TValI(o # cl) = Itruth(I(o # cl)).

    To ensure that all members of a subclass are also members of the superclass, i.e., o # cl and cl ## scl imply o # scl, the following is required:

    • For all o, cl, sclD,   glbt(TValI(o # cl), TValI(cl ## scl))  ≤t  TValI(o # scl).

    Note that this is a restriction on Itruth and the mapping I, which is expressed in a more succinct form using TValI.

  8. Frame: TValI(o[a1->v1 ... ak->vk]) = Itruth(I(o[a1->v1 ... ak->vk])).

    Since the bag of attribute/value pairs represents the conjunction of all the pairs, the following is required:

    • TValI(o[a1->v1 ... ak->vk]) = glbt(TValI(o[a1->v1]), ..., TValI(o[ak->vk])).

    Observe that this is a restriction on Itruth and the mapping I. For brevity, it is expressed in a more succinct form using TValI.

  9. Externally defined atomic formula: TValI(External(t loc)) = Itruth(Iexternal(σ)(I(s1), ..., I(sn))), if External(t loc) is an atomic formula that is an instance of the external schema σ = (?X1 ... ?Xn; τ; loc) by substitution ?X1/s1 ... ?Xn/sn.

    Note that, by definition, External(t loc) is well-formed only if it is an instance of an external schema. Furthermore, by the definition of coherent sets of external schemas, it can be an instance of at most one external schema, so I(External(t loc)) is well-defined.

  10. Connectives and quantifiers: if S is a connective or a quantifier and S(t1 ... tn) is a well-formed formula term then TValI(S(t1 ... tn)) = Itruth(I(S(t1 ... tn))).

    To ensure the intended semantics for the RIF-FLD reserved connectives and quantifiers, the following restrictions are imposed (observe that all these are restrictions on Itruth and the mapping I, which are expressed via TValI, for brevity):

    1. Conjunction: TValI(And(c1 ... cn)) = glbt(TValI(c1), ..., TValI(cn)).

      The empty conjunction is treated as a tautology, so TValI(And()) = t.

    2. Disjunction: TValI(Or(c1 ... cn)) = lubt(TValI(c1), ..., TValI(cn)).

      The empty disjunction is treated as a contradiction, so TValI(Or()) = f.

    3. Negation: TValI(Neg Neg φ) = TValI(φ) and TValI(Naf φ) = ~TValI(φ).

      The symbol ~ here is the self-inverse operator of negation on TV introduced in Section Truth Values.

      The symmetric negation, Neg, is sufficiently general to capture many different kinds of such negation. For instance, classical negation would, in addition, require TValI(Neg φ) = ~TValI(φ); strong negation (analogous to the one in [APP96]) can be characterized by TValI(Neg φ) ≤t ~TValI(φ); and explicit negation (analogous to [APP96]) would require no additional constraints.

      Note that both classical and default negation are interpreted the same way in any concrete semantic structure. The difference between the two kinds of negation comes into play when logical entailment is defined.

    4. Quantification:
      • TValI(Exists ?v1 ... ?vn (φ)) = lubt(TValI*(φ)).
      • TValI(Forall ?v1 ... ?vn (φ)) = glbt(TValI*(φ)).

      Here lubt (respectively, glbt) is taken over all interpretations I* of the form <TV, DTS, D, IC, I*V, IF, INF, Ilist, Itail, Iframe, Isub, Iisa, I=, Iexternal, Iconnective, Itruth>, which are exactly like I, except that the mapping I*V, is used instead of IV.   I*V is defined to coincide with IV on all variables except, possibly, on ?v1,... ,?vn.

    5. Rule implication:
      • TValI(head :- body)=t, if TValI(head) ≥t TValI(body).
      • TValI(head :- body)=f   otherwise.
    6. Dialects that introduce additional connectives and quantifiers should define appropriate restrictions on TValI to give those new elements desired semantics.
  11. Groups of formulas:

    If Γ is a group formula of the form Group(φ1 ... φn) then

    This means that a group of formulas is treated as a conjunction.   ☐

Note that rule implications and equality formulas are always two-valued, even if TV has more than two values.


3.7 Interpretation of Documents

Document formulas are interpreted using semantic multi-structures, which are sets of semantic structures. Their purpose is to provide a semantics to RIF multi-documents, i.e., RIF documents that import other RIF documents and/or contain references to other RIF documents (via remote module refererence formulas). One interesting feature of the multi-document semantics is that rif:local symbols that belong to different documents can have different meanings.

Definition (Semantic multi-structures). A semantic multi-structure, Î, is a set of semantic structures of the form {J, K; Ii1, Ii2, ...; Mj1, Mj2, ...}, where

The locators used in Î must be of the kinds allowed in the Import and Module directives.

The first semantic structure, J, is used to interpret non-document formulas, as we shall see shortly. The structure K is used for document formulas. The structures in the middle group, Iik, are optional; they are used to interpret imported documents. All the structures in that group must be adorned with the locators of distinct documents. The structures in the last group, Mjk, are also optional; they are used to interpret documents that are linked as remote modules to other documents (via the Module directive). The structures in that group must also be adorned with locators of distinct documents. However, the same locator can adorn a structure in the import group and a structure in the module group.

The semantic structures J, K, and all the structures Iik in the import group are required to be identical in all respects except that

The semantic structures Mjk in the last group have many more degrees of freedom: they are required to agree with the other structures in Î only to the extent that the mappings MCjk must coincide with JC, KC, and ICik on all constants in Const except the ones in the rif:local symbol space.     ☐

This definition makes the intent behind the rif:local constants clear: occurrences of these constants in different documents can be interpreted differently even if they have the same name. Therefore, each document can choose the names for the rif:local constants freely and without regard to the names of such constants used in the imported documents.


Definition (Imported document). Let Δ be a document formula and Import(loc) be one of its import directives, where loc is a locator of another document formula, Δ'. In this case, we say that Δ' is directly imported into Δ.

A document formula Δ' is said to be imported into Δ if it is either directly imported into Δ or it is imported (directly or not) into another document, which itself is directly imported into Δ.     ☐

The above definition deals only with one-argument import directives, since two-argument directives are expected to be defined on a case-by-case basis by other specifications that need to be integrated with RIF.

Definition (Remote module). Let Δ be a document formula and let Module(n loc) be one of its remote module directives, where loc is a locator for another document formula, Δ'. In this case, we say that Δ' is a directly linked remote module of Δ.

A document formula Δ' is said to be a linked remote module for Δ if it is either directly linked to Δ or it is linked (directly or not) to another document, which is directly linked to Δ.     ☐

Next, we extend the term-interpreting mapping associated with each semantic structure to the case of remote term references.

Definition (Term-interpreting mapping for remote term references). Let Δ be a document formula and Î = {J, K; Ii1, Ii2, ...; Mj1, Mj2, ...} be a semantic multi-structure that contains semantic structures for all the documents that are imported into Δ or linked to it as remote modules (directly or indirectly). Let φ@r be a remote term that appears in one of those documents, say Δ' and let LÎ be a semantic structure.

If there is a unique remote module directive Module(n jk) in Δ' such that L(r) = L(n) then

If no such remote module directive exists or if such a directive is not unique, then L(φ@r) is indeterminate, i.e., it can be any element in the domain of L.

Having extended the term-interpreting mapping to remote terms we can now extend the truth valuation to such terms:

Note that although the above definition is very general, in practice the terms that are used as remote module references (i.e., r in ...@r) make sense only if they are interpreted by fixed and well-defined domain elements, and dialects are expected to impose the appropriate restrictions. Examples of such fixed interpretations include data types and Herbrand domains [Lloyd87].


We now use the notion of semantic multi-structures to define a semantics for RIF documents.

Definition (Truth valuation of document formulas). Let Δ be a document formula and let Δ1, ..., Δn be all the RIF-FLD document formulas that are imported (directly or indirectly, according to the previous definition) into Δ. Let Γ, Γ1, ..., Γn denote the respective group formulas associated with these documents. Let Î = {J, K; Ii1, Ii2, ...; Mj1, Mj2, ...} be a semantic multi-structure whose import group contains semantic structures adorned with the locators i1, ..., in of the documents Δ1, ..., Δn. Then we define:

Note that this definition considers only those document formulas that are reachable via the one-argument import directives. Two-argument import directives are not covered by RIF-FLD. Their semantics is supposed to be defined by other documents, such as [RIF-RDF+OWL].

Also note that some of the Γi above may be missing since all parts in a document formula are optional. In this case, we assume that Γi is a tautology, such as And(), and every TVal function maps such a Γi to the truth value t.

For non-document formulas, we extend TValI(φ) from regular semantic structures to multi-structures as follows: if Î is a multi-structure {J, K; ...} then TValÎ(φ) = TValJ(φ).

Definition (Models). Let I be a semantic structure or multi-structure. We say that I is a model of a formula, φ, written as I|=φ, iff TValI(φ) = t. Here φ can be a document or a non-document formula.     ☐


3.8 Intended Semantic Structures

The semantics of a set of formulas, Γ, is the set of its intended semantic multi-structures. RIF-FLD does not specify what these intended multi-structures are, leaving this to RIF dialects. Different logic theories may have different criteria for what is considered an intended semantic multi-structure.

For the classical first-order logic, every model is an intended semantic multi-structure. For [RIF-BLD], which is based on Horn rules, intended multi-structures are defined only for sets of rules: an intended semantic multi-structure of a RIF-BLD set of formulas, Γ, is the unique minimal Herbrand model [Lloyd87] of Γ. For the dialects in which rule bodies may contain literals negated with the default negation connective Naf, only some of the minimal Herbrand models of a set of rules are intended. Each logic dialect of RIF must define the set of intended semantic multi-structures precisely. The two most common such theories are the well-founded models [GRS91] and stable models [GL88].

The following example illustrates the notion of intended semantic structures. Suppose Γ consists of a single rule formula p :- Naf q. If Naf were interpreted as classical negation, then this rule would be simply equivalent to Or(p q), and so it would have two kinds of models: those where p is true and those where q is true. In contrast to first-order logic, most rule-based systems do not consider p and q symmetrically. Instead, they view the rule p :- Naf q as a statement that p must be true if it is not possible to establish the truth of q. Since it is, indeed, impossible to establish the truth of q, such theories would derive p even though it does not logically follow from Or(p q). The logic underlying rule-based systems also assumes that only the minimal Herbrand models are intended (minimality here is with respect to the set of true facts). Furthermore, although our example has two minimal Herbrand models -- one where p is true and q is false, and the other where p is false, but q is true, only the first model is considered to be intended.

The above concept of intended semantic multi-structures and the corresponding notion of logical entailment with respect to these intended semantic multi-structures, defined below, is due to [Shoham87].


3.9 Logical Entailment

We will now define what it means for one RIF-FLD formula to entail another. This notion is typically used for defining queries to knowledge bases and for other tasks, such as testing subsumption of concepts (e.g., in OWL). We assume that each set of formulas has an associated set of intended semantic structures (which depend on RIF dialects).


Definition (Logical entailment). Let φ and ψ be (document or non-document) RIF-FLD formulas. We say that φ entails ψ, written as φ |= ψ, if and only if for every intended semantic multi-structure Î of φ for which both TValÎ(φ) and TValÎ(ψ) are defined, it is the case that TValÎ(φ) ≤t TValÎ(ψ).   ☐

This general notion of entailment covers both first-order logic and the non-monotonic logics that underlie many rule-based languages [Shoham87].


Note that one consequence of the multi-document semantics is that local constants specified in one document cannot be queried from another document. For instance, if one document, Δ', has the fact "http://example.com/ppp"^^rif:iri("abc"^^rif:local) while another document formula, Δ, imports Δ' and has the rule "http://example.com/qqq"^^rif:iri(?X) :- "http://example.com/ppp"^^rif:iri(?X) , then Δ |= "http://example.com/qqq"^^rif:iri("abc"^^rif:local) does not hold. This is because the symbol "abc"^^rif:local in Δ' and Δ is treated as different constants by semantic multi-structures.

The behavior of local symbols should be contrasted with the behavior of rif:iri symbols. Suppose, in the above scenario, Δ' also has the fact "http://example.com/ppp"^^rif:iri("http://cde"^^rif:iri). Then Δ |= "http://example.com/qqq"^^rif:iri("http:cde"^^rif:iri) does hold.

4 XML Serialization Framework

The RIF-FLD XML serialization framework defines

As explained in the overview section, the design of RIF envisions that the presentation syntaxes of future logic RIF dialects will be specializations of the presentation syntax of RIF-FLD. This means that every well-formed formula in the presentation syntax of a standard logic RIF dialect must also be well-formed in a specialization of RIF-FLD, which includes actualizing the RIF-FLD extension points (see overview section). The goal of the XML serialization framework is to provide a similar yardstick for the RIF XML syntax. This amounts to the requirement that any admissible XML document for a logic RIF dialect must also be an admissible XML document for a specialized RIF-FLD (admissibility is defined below). In terms of the presentation-to-XML syntax mappings, this means that each mapping for a logic RIF dialect must be a restriction of the corresponding mapping for RIF-FLD. For instance, the mapping from the presentation syntax of RIF-BLD to XML in [RIF-BLD] is a restriction of the presentation-syntax-to-XML mapping for RIF-FLD. In this way, RIF-FLD provides a framework for extensibility and mutual compatibility between XML syntaxes of RIF dialects.

Recall that the syntax of RIF-FLD is not context-free and thus cannot be fully captured by EBNF or XML Schema. Still, validity with respect to XML Schema can be a useful test. To reflect this state of affairs, we define two notions of syntactic correctness. The weaker notion checks correctness only with respect to XML Schema, while the stricter notion represents "true" syntactic correctness.

Definition (Specialization of RIF-FLD schema to a dialect schema). If a dialect, D, specializes RIF-FLD then its XML schema must be a specialization of the XML schema of RIF-FLD. This includes elimination of some elements and attributes, restriction of the XML types of the others, and replacement of the extension points with appropriate concrete elements of the specified (possibly restricted) types.   ☐

Definition (Valid XML document in RIF-FLD). A valid RIF-FLD document in the XML syntax is an XML document that is valid with respect to the XML schema in Appendix XML Schema for RIF-FLD, where the extension points NEWCONNECTIVE, NEWQUANTIFIER, NEWAGGRFUNC, and NEWTERM are specialized as concrete elements of the types prescribed by the RIF-FLD XML schema.

If a dialect, D, specializes RIF-FLD then a valid XML document in dialect D is one that is valid with respect to the specialized XML schema of D.   ☐

Definition (Admissible XML document in a logic dialect). An admissible RIF-FLD document in the XML syntax is a valid FLD document in that syntax that is the image of a well-formed RIF-FLD document in the presentation syntax (see Definition Well-formed formula) under the presentation-to-XML syntax mapping χfld defined in Section Mapping from the RIF-FLD Presentation Syntax to the XML Syntax.

If a dialect, D, specializes RIF-FLD then an XML document is admissible with respect to D if and only if it is a valid document in D and it is an image under χD of a well-formed document in the presentation syntax of D, where χD is the presentation-to-XML mapping defined by the dialect D.

Note that if D requires the directive Dialect(D) as part of its syntax then this implies that any D-admissible document must have this directive.   ☐

A round-tripping of an admissible document in a dialect, D, is a semantics-preserving mapping to a document in any language L followed by a semantics-preserving mapping from the L-document back to an admissible D-document. While semantically equivalent, the original and the round-tripped D-documents need not be identical.


4.1 XML for the RIF-FLD Language

RIF-FLD uses [XML1.0] for its XML syntax. The XML serialization for RIF-FLD is alternating or fully striped [ANF01]. A fully striped serialization views XML documents as objects and divides all XML tags into class descriptors, called type tags, and property descriptors, called role tags [TRT03]. We follow the tradition of using capitalized names for type tags and lowercase names for role tags.

The all-uppercase classes in the EBNF of the presentation syntax, such as FORMULA, become XML Schema groups in Appendix XML Schema for FLD. They are not visible in instance markup. The other classes as well as non-terminals and symbols (such as Exists or =) become XML elements with optional attributes, as shown below.


The RIF serialization framework for the syntax of Section EBNF Grammar for the Presentation Syntax of RIF-FLD uses the following XML tags. While there is a RIF-FLD element tag for the Import directive and an attribute for the Dialect directive, there are none for the Base and Prefix directives: they are handled as discussed in Section Mapping from the RIF-FLD Presentation Syntax to the XML Syntax.

- Document  (document, with optional 'dialect' attribute, containing optional directive and payload roles)
- directive (directive role, containing Import)
- payload   (payload role, containing Group)
- Import    (importation, containing location and optional profile)
- Module    (remote module, associating internal name with location)
- location  (location role, containing ANYURICONST)
- internal  (internal role, containing ground term as remote module name) 
- profile   (profile role, containing PROFILE)
- Group     (nested collection of sentences)
- sentence  (sentence role, containing FORMULA or Group)
- Forall    (quantified formula for 'Forall', containing declare and formula roles)
- Exists    (quantified formula for 'Exists', containing declare and formula roles)
- declare   (declare role, containing a Var)
- formula   (formula role, containing a FORMULA)
- termula   (termula role, containing a TERMULA)
- Implies   (implication, containing if and then roles)
- if        (antecedent role, containing FORMULA)
- then      (consequent role, containing FORMULA)
- And       (conjunction)
- Or        (disjunction)
- Neg       (strong negation, containing a formula role)
- Naf       (default negation, containing a formula role)
- Atom      (atom formula, positional or with named arguments)
- Remote    (prefix version of remote term '@', containing a formula/termula and an internal role)
- External  (external call, containing a content role)
- content   (content role, containing an Atom, for predicates, or Expr, for functions)
- Member    (member formula)
- Subclass  (subclass formula)
- Frame     (Frame formula)
- object    (Member/Frame role containing a TERM or an object description)
- op        (Atom/Expr role for predicates/functions as operations)
- args      (Atom/Expr positional arguments role, with fixed 'ordered' attribute, containing n TERMs)
- instance  (Member instance role)
- class     (Member class role)
- sub       (Subclass sub-class role)
- super     (Subclass super-class role)
- slot      (Atom/Expr or Frame slot role, with fixed 'ordered' attribute, containing a Name or TERM followed by a TERM)
- Equal     (prefix version of term equation '=')
- left      (Equal left-hand side role)
- right     (Equal right-hand side role)
- Expr      (expression formula, positional or with named arguments)
- List      (list term, closed or open)
- rest      (list rest role, corresponding to '|')
- Min       (aggregate function)
- Max       (aggregate function)
- Sum       (aggregate function)
- Prod      (aggregate function)
- Avg       (aggregate function)
- Count     (aggregate function)
- Set       (aggregate function)
- Bag       (aggregate function)
- Const     (individual, function, or predicate symbol, with optional 'type' attribute)
- Name      (name of named argument)
- Var       (logic variable)
 
- id        (identifier role, containing CONST)
- meta      (meta role, containing metadata as a Frame or Frame conjunction)

The name of a prefix is not associated with an XML element, since it is handled via preprocessing as discussed in Section Mapping of the Non-annotated RIF-FLD Language.

The id and meta elements, which are expansions of the IRIMETA element, can occur optionally as the initial children of any Class element.

The XML Schema Definition of RIF-FLD is given in Appendix XML Schema for FLD.

The XML syntax for symbol spaces uses the type attribute associated with the XML element Const. For instance, a literal in the xs:dateTime datatype is represented as <Const type="&xs;dateTime">2007-11-23T03:55:44-02:30</Const>. RIF-FLD also uses the ordered attribute to indicate that the children of args and slot elements are ordered.

Example 5 (Serialization of a nested RIF-FLD group with annotations).

This example shows an XML serialization for the formulas in Example 3. For convenience of reference, the original formulas are included at the top. For better readability, we again use the shortcut syntax defined in [RIF-DTB].

Presentation syntax:

  Document(
   Dialect(FOL)
   Prefix(dc     <http://http://purl.org/dc/terms/>)
   Prefix(ex     <http://example.org/ontology#>)
   Prefix(hamlet <http://www.shakespeare-literature.com/Hamlet/>)

  (* hamlet:assertions hamlet:assertions[dc:title->"Hamlet" dc:creator->"Shakespeare"] *)      
   Group(
      Exists ?X (And(?X # ex:RottenThing
                     ex:partof(?X <http://www.denmark.dk>)))
      Forall ?X (Or(hamlet:tobe(?X)  Naf hamlet:tobe(?X)))
      Forall ?X (And(Exists ?B (And(ex:has(?X ?B) ?B # ex:business))
                     Exists ?D (And(ex:has(?X ?D) ?D # ex:desire)))
                   :- ?X # ex:man)
     (* hamlet:facts *)
     Group(
         hamlet:Yorick # ex:poor
         hamlet:Hamlet # ex:prince
      )
   )
  )


XML serialization:

<!DOCTYPE Document [
  <!ENTITY dc     "http://purl.org/dc/terms/">
  <!ENTITY ex     "http://example.org/ontology#">
  <!ENTITY hamlet "http://www.shakespeare-literature.com/Hamlet/">
  <!ENTITY rif    "http://www.w3.org/2007/rif#">
  <!ENTITY xs     "http://www.w3.org/2001/XMLSchema#">
]>

<Document dialect="FOL">
  <payload>
   <Group>
    <meta>
      <Frame>
        <object>
          <Const type="&rif;iri">hamlet:assertions</Const>
        </object>
        <slot ordered="yes">
          <Const type="&rif;iri">&dc;title</Const>
          <Const type="&xs;string">Hamlet</Const>
        </slot>
        <slot ordered="yes">
          <Const type="&rif;iri">&dc;creator</Const>
          <Const type="&xs;string">Shakespeare</Const>
        </slot>
      </Frame>
    </meta>
    <sentence>
     <Exists>
       <declare><Var>X</Var></declare>
       <formula>
         <And>
           <formula>
             <Member>
               <instance><Var>X</Var></instance>
               <class><Const type="&rif;iri">ex:RottenThing</Const></class>
             </Member>
           </formula>
           <formula>
             <Atom>
               <op><Const type="&rif;iri">ex:partof</Const></op>
               <args ordered="yes">
                 <Var>X</Var>
                 <Const type="&rif;iri">http://www.denmark.dk</Const>
               </args>
             </Atom>
           </formula>
         </And>
       </formula>
     </Exists>
    </sentence>
    <sentence>
     <Forall>
       <declare><Var>X</Var></declare>
       <formula>
         <Or>
           <formula>
             <Atom>
               <op><Const type="&rif;iri">hamlet:tobe</Const></op>
               <args ordered="yes"><Var>X</Var></args>
             </Atom>
           </formula>
           <formula>
             <Naf>
               <formula>
                 <Atom>
                   <op><Const type="&rif;iri">hamlet:tobe</Const></op>
                   <args ordered="yes"><Var>X</Var></args>
                 </Atom>
               </formula>
             </Naf>
           </formula>
         </Or>
       </formula>
     </Forall>
    </sentence>
    <sentence>
     <Forall>
       <declare><Var>X</Var></declare>
       <formula>
         <Implies>
           <if>
             <Member>
               <instance><Var>X</Var></instance>
               <class><Const type="&rif;iri">ex:man</Const></class>
             </Member>
           </if>
           <then>
             <And>
               <formula>
                 <Exists>
                   <declare><Var>B</Var></declare>
                   <formula>
                    <And>
                     <formula>
                       <Atom>
                         <op><Const type="&rif;iri">ex:has</Const></op>
                         <args>
                           <Var>X</Var>
                           <Var>B</Var>
                         </args>
                       </Atom>
                     </formula>
                     <formula>
                       <Member>
                         <instance><Var>B</Var></instance>
                         <class><Const type="&rif;iri">ex:business</Const></class>
                       </Member>
                     </formula>
                   </And>
                  </formula>
                 </Exists>
               </formula>
               <formula>
                 <Exists>
                   <declare><Var>D</Var></declare>
                   <formula>
                    <And>
                     <formula>
                       <Atom>
                         <op><Const type="&rif;iri">ex:has</Const></op>
                         <args>
                           <Var>X</Var>
                           <Var>D</Var>
                         </args>
                       </Atom>
                     </formula>
                     <formula>
                       <Member>
                         <instance><Var>D</Var></instance>
                         <class><Const type="&rif;iri">ex:desire</Const></class>
                       </Member>
                     </formula>
                   </And>
                  </formula>
                 </Exists>
               </formula>
             </And>
           </then>
         </Implies>
       </formula>
     </Forall>
   </sentence>
   <sentence>
     <Group>
       <meta>
         <Frame>
           <object>
             <Const type="&rif;iri">hamlet:facts</Const>
           </object>
         </Frame>
       </meta>
       <sentence>
         <Member>
           <instance><Const type="&rif;iri">hamlet:Yorick</Const></instance>
           <class><Const type="&rif;iri">ex:poor</Const></class>
         </Member>
       </sentence>
       <sentence>
         <Member>
           <instance><Const type="&rif;iri">hamlet:Hamlet</Const></instance>
           <class><Const type="&rif;iri">ex:prince</Const></class>
         </Member>
       </sentence>
     </Group>
    </sentence>
   </Group>
  </payload>
 </Document>


4.2 Mapping from the RIF-FLD Presentation Syntax to the XML Syntax

This section defines a normative mapping, χfld, from the presentation syntax of Section EBNF Grammar for the Presentation Syntax of RIF-FLD to the XML syntax of RIF-FLD. The mapping is given via tables where each row specifies the mapping of a particular syntactic pattern in the presentation syntax. These patterns appear in the first column of the tables and the bold-italic symbols represent metavariables. The second column represents the corresponding XML patterns, which may contain applications of the mapping χfld to these metavariables. When an expression χfld(metavar) occurs in an XML pattern in the right column of a translation table, it should be understood as a recursive application of χfld to the presentation syntax represented by the metavariable. The XML syntax result of such an application is substituted for the expression χfld(metavar). A sequence of terms containing metavariables with subscripts is indicated by an ellipsis. A metavariable or a well-formed XML subelement is marked as optional by appending a bold-italic question mark, ?, to its right.


4.2.1 Mapping of the Non-annotated RIF-FLD Language

The χfld mapping from the presentation syntax to the XML syntax of the non-annotated RIF-FLD Language is given by the table below. Each row indicates a translation χfld(Presentation) = XML. Since the presentation syntax of RIF-FLD is context sensitive, the mapping must differentiate between the terms that occur in the position of the individuals and the terms that occur as atomic formulas. To this end, in the translation table, the positional and named-argument terms that occur in the context of atomic formulas are denoted by the expressions of the form pred(...) and the terms that occur as individuals are denoted by expressions of the form func(...). In the table, each metavariable for an (unnamed) positional argumenti is assumed to be instantiated to values unequal to the instantiations of named arguments unicodestringj -> fillerj. Regarding the last but first row, we assume that shortcuts for constants [RIF-DTB] have already been expanded to their full form ("..."^^symspace). The AGGRFUNC metavariable stands for any of the aggregation functions Min, Max, Count, Avg, Sum, Prod, Set, Bag, or NEWAGGRFUNC.

Thus, the mapping of the extension point for aggregate functions (NEWAGGRFUNC) is handled by the AGGRFUNC metavariable, along with the mapping of the specific aggregate functions (Min etc.). The mapping of the extension points for quantifiers (NEWQUANTIFIER) and connectives (NEWCONNECTIVE) generalizes the mapping for the specific quantifiers (Forall, Exists) and connectives (And, Or), respectively. The mapping of the extension point for terms (NEWTERM) keeps NEWTERM entirely unconstrained in the presentation syntax and uses a wildcard content model (indicated by ellipses) in the XML syntax. This is because the content of NEWTERM is left entirely up to RIF dialects. Recall that the extension point for symbols (NEWSYMBOL) is part of the alphabet and is not dealt with in the EBNF and XML grammars.

Also recall that OpenList(t1 ... tm t) is just an alternative form for List(t1 ... tm | t), so its mapping is not represented separately.

Note that the Import and Dialect directives are handled by the presentation-to-XML syntax mapping, using an XML attribute for dialect names (values: FOL, BLD, Core, etc.). On the other hand, the Prefix and Base directives are not handled by this mapping but by expanding the associated shortcuts (compact URIs). Namely, a prefix name declared in a Prefix directive is expanded into the associated IRI, while relative IRIs are completed using the IRI declared in the Base directive. The mapping χfld applies only to such expanded documents. RIF-FLD also allows other treatments of Prefix and Base provided that they produce equivalent XML documents. One such treatment is employed in the examples in this document, especially Example 5. It replaces prefix names with definitions of XML entities as follows. Each Prefix declaration becomes an ENTITY declaration [XML1.0] within a DOCTYPE DTD attached to the RIF-FLD Document. The Base directive is mapped to the xml:base attribute [XML-Base] in the XML Document tag. Compact URIs of the form prefix:suffix are then mapped to &prefix;suffix.

Presentation Syntax XML Syntax
Document(
  Dialect(name)?
  Import(iloc1 prfl1?)
   . . .
  Import(ilocn prfln?)
  Module(name1 mloc1)
   . . .
  Module(namek mlock)
  group
        )
<Document dialect="name"?>
  <directive>
    <Import>
      <location>χfld(iloc1)</location>
      <profile>χfld(prfl1)</profile>?
    </Import>
  </directive>
   . . .
  <directive>
    <Import>
      <location>χfld(ilocn)</location>
      <profile>χfld(prfln)</profile>?
    </Import>
  </directive>
  <directive>
    <Module>
      <internal>χfld(name1)</internal>
      <location>χfld(mloc1)</location>
    </Module>
  </directive>
   . . .
  <directive>
    <Module>
      <internal>χfld(namek)</internal>
      <location>χfld(mlock)</location>
    </Module>
  </directive>
  <payload>χfld(group)</payload>
</Document>
Group(
  clause1
   . . .
  clausen
     )
<Group>
  <sentence>χfld(clause1)</sentence>
   . . .
  <sentence>χfld(clausen)</sentence>
</Group>
Forall
  variable1
   . . .
  variablen (
             body
            )
<Forall>
  <declare>χfld(variable1)</declare>
   . . .
  <declare>χfld(variablen)</declare>
  <formula>χfld(body)</formula>
</Forall>
Exists
  variable1
  . . .
  variablen (
             body
            )
<Exists>
  <declare>χfld(variable1)</declare>
   . . .
  <declare>χfld(variablen)</declare>
  <formula>χfld(body)</formula>
</Exists>
NEWQUANTIFIER
  variable1
  . . .
  variablen (
             body
            )
<NEWQUANTIFIER>
  <declare>χfld(variable1)</declare>
   . . .
  <declare>χfld(variablen)</declare>
  <formula>χfld(body)</formula>
</NEWQUANTIFIER>
conclusion :- condition
<Implies>
  <if>χfld(condition)</if>
  <then>χfld(conclusion)</then>
</Implies>
And (
  conjunct1
  . . .
  conjunctn
    )
<And>
  <formula>χfld(conjunct1)</formula>
   . . .
  <formula>χfld(conjunctn)</formula>
</And>
Or (
  disjunct1
  . . .
  disjunctn
   )
<Or>
  <formula>χfld(disjunct1)</formula>
   . . .
  <formula>χfld(disjunctn)</formula>
</Or>
NEWCONNECTIVE (
  argument1
  . . .
  argumentn
              )
<NEWCONNECTIVE>
  <formula>χfld(argument1)</formula>
   . . .
  <formula>χfld(argumentn)</formula>
</NEWCONNECTIVE>
Neg form
<Neg>
  <formula>χfld(form)</formula>
</Neg>
Naf form
<Naf>
  <formula>χfld(form)</formula>
</Naf>
query @ modref
<Remote>
  <formula>χfld(query)</formula>
  <internal>χfld(modref)</internal>
</Remote>
External (
  atomframexpr
         )
<External>
  <content>χfld(atomframexpr)</content>
</External>
pred (
  argument1
  . . .
  argumentn
     )
<Atom>
  <op>χfld(pred)</op>
  <args ordered="yes">
    χfld(argument1)
    . . .
    χfld(argumentn)
  </args>
</Atom>
func (
  argument1
  . . .
  argumentn
     )
<Expr>
  <op>χfld(func)</op>
  <args ordered="yes">
    χfld(argument1)
    . . .
    χfld(argumentn)
  </args>
</Expr>
List (
  element1
  . . .
  elementn
    )
<List>
  χfld(element1)
  . . .
  χfld(elementn)
</List>
List (
  element1
  . . .
  elementm
  |
  remainder
    )
<List>
  χfld(element1)
  . . .
  χfld(elementm)
  <rest>χfld(remainder)</rest>
</List>
pred (
  unicodestring1 -> filler1
  . . .
  unicodestringn -> fillern
     )
<Atom>
  <op>χfld(pred)</op>
  <slot ordered="yes">
    <Name>unicodestring1</Name>
    χfld(filler1)
  </slot>
   . . .
  <slot ordered="yes">
    <Name>unicodestringn</Name>
    χfld(fillern)
  </slot>
</Atom>
func (
  unicodestring1 -> filler1
  . . .
  unicodestringn -> fillern
     )
<Expr>
  <op>χfld(func)</op>
  <slot ordered="yes">
    <Name>unicodestring1</Name>
    χfld(filler1)
  </slot>
   . . .
  <slot ordered="yes">
    <Name>unicodestringn</Name>
    χfld(fillern)
  </slot>
</Expr>
inst [
  key1 -> filler1
  . . .
  keyn -> fillern
     ]
<Frame>
  <object>χfld(inst)</object>
  <slot ordered="yes">
    χfld(key1)
    χfld(filler1)
  </slot>
   . . .
  <slot ordered="yes">
    χfld(keyn)
    χfld(fillern)
  </slot>
</Frame>
inst # class
<Member>
  <instance>χfld(inst)</instance>
  <class>χfld(class)</class>
</Member>
sub ## super
<Subclass>
  <sub>χfld(sub)</sub>
  <super>χfld(super)</super>
</Subclass>
left = right
<Equal>
  <left>χfld(left)</left>
  <right>χfld(right)</right>
</Equal>
AGGRFUNC {
  variable
  variable1
  . . .
  variablem
         |
     compform
         }
<AGGRFUNC>
  <declare>χfld(variable)</declare>
  <declare>χfld(variable1)</declare>
   . . .
  <declare>χfld(variablem)</declare>
  <formula>χfld(compform)</formula>
</AGGRFUNC>
"unicodestring"^^space
<Const type="space">unicodestring</Const>
?unicodestring
<Var>unicodestring</Var>
NEWTERM
<NEWTERM>...</NEWTERM>

4.2.2 Mapping of RIF-FLD Annotations

The χfld mapping from RIF-FLD annotations in the presentation syntax to the XML syntax is specified by the table below. It extends the translation table of Section Mapping of the Non-annotated RIF-FLD Language. The metavariable Typetag in the presentation and XML syntaxes stands for any of the class names And, Or, External, Document, or Group, Quantifier for Exists or Forall, and Negation for Neg or Naf. The dollar sign, $, stands for any of the binary infix operator names #, ##, =, or :-, while Binop stands for their respective class names Member, Subclass, Equal, or Implies. The metavariable attr? is used with Typetag to capture the optional dialect attribute (with its value) of Document. Again, each metavariable for an (unnamed) positional argumenti is assumed to be instantiated to values unequal to the instantiations of named arguments unicodestringj -> fillerj.

Presentation Syntax XML Syntax
(* const? frameconj? *)
Typetag ( e1 . . . en )
<Typetag attr?>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  e1' . . . en'
</Typetag>

where attr, e1', . . ., en' are defined by the equation
χfld(Typetag(e1 . . . en)) = <Typetag attr?>e1' . . . en'</Typetag>
(* const? frameconj? *)
Quantifier variable1 . . . variablen ( body )
<Quantifier>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  <declare>χfld(variable1)</declare>
  . . .
  <declare>χfld(variablen)</declare>
  <formula>χfld(body)</formula>
</Quantifier>
(* const? frameconj? *)
Negation e
<Negation>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  χfld(e)
</Negation>
(* const? frameconj? *)
pred (
  argument1
  . . .
  argumentn
     )
<Atom>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  <op>χfld(pred)</op>
  <args ordered="yes">
    χfld(argument1)
    . . .
    χfld(argumentn)
  </args>
</Atom>
(* const? frameconj? *)
func (
  argument1
  . . .
  argumentn
     )
<Expr>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  <op>χfld(func)</op>
  <args ordered="yes">
    χfld(argument1)
    . . .
    χfld(argumentn)
  </args>
</Expr>
(* const? frameconj? *)
pred (
  unicodestring1 -> filler1
  . . .
  unicodestringn -> fillern
     )
<Atom>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  <op>χfld(pred)</op>
  <slot ordered="yes">
    <Name>unicodestring1</Name>
    χfld(filler1)
  </slot>
   . . .
  <slot ordered="yes">
    <Name>unicodestringn</Name>
    χfld(fillern)
  </slot>
</Atom>
(* const? frameconj? *)
func (
  unicodestring1 -> filler1
  . . .
  unicodestringn -> fillern
     )
<Expr>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  <op>χfld(func)</op>
  <slot ordered="yes">
    <Name>unicodestring1</Name>
    χfld(filler1)
  </slot>
   . . .
  <slot ordered="yes">
    <Name>unicodestringn</Name>
    χfld(fillern)
  </slot>
</Expr>
(* const? frameconj? *)
inst [
  key1 -> filler1
  . . .
  keyn -> fillern
     ]
<Frame>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  <object>χfld(inst)</object>
  <slot ordered="yes">
    χfld(key1)
    χfld(filler1)
  </slot>
   . . .
  <slot ordered="yes">
    χfld(keyn)
    χfld(fillern)
  </slot>
</Frame>
(* const? frameconj? *)
e1 $ e2
<Binop>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  e1' e2'
</Binop>

where Binop, e1', e2' are defined by the equation
χfld(e1 $ e2) = <Binop>e1' e2'</Binop>
(* const? frameconj? *)
unicodestring^^symspace
<Const type="symspace">
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  unicodestring
</Const>
(* const? frameconj? *)
?unicodestring
<Var>
  <id>χfld(const)</id>?
  <meta>χfld(frameconj)</meta>?
  unicodestring
</Var>


5 Conformance of RIF Processors with RIF Dialects

RIF does not require or expect conformant systems to implement the presentation syntax of a RIF dialect. Instead, conformance is described in terms of semantics-preserving transformations between the native syntax of a compliant system and the XML syntax of RIF-BLD.

Let Τ be a set of datatypes and symbol spaces that includes the datatypes specified in [RIF-DTB] and the symbol spaces rif:iri and rif:local. Suppose also that Ε is a coherent set of external schemas that includes the built-ins listed in [RIF-DTB]. Let D be a RIF dialect (e.g., [RIF-BLD]). We say that a formula φ is a DΤ,Ε formula iff

A RIF processor is a conformant DΤ,Ε consumer iff it implements a semantics-preserving mapping, μ, from the set of all DΤ,Ε formulas to the language L of the processor.

Formally, this means that for any pair φ, ψ of DΤ,Ε formulas for which φ |=D ψ is defined, φ |=D ψ iff μ(φ) |=L μ(ψ). Here |=D denotes the logical entailment in the RIF dialect D and |=L is the logical entailment in the language L of the RIF processor.

A RIF processor is a conformant DΤ,Ε producer iff it implements a semantics-preserving mapping, ν, from the language L of the processor to the set of all DΤ,Ε formulas.

Formally, this means that for any pair φ, ψ of formulas in L for which φ |=L ψ is defined, φ |=L ψ iff ν(φ) |=D ν(ψ).


An admissible document in a logic RIF dialect D is one which conforms to all the syntactic constraints of D, including the ones that cannot be checked by an XML Schema validator (see Definition Admissible XML document in a logic dialect).

6 References

6.1 Normative References

[OWL-Reference]
OWL Web Ontology Language Reference, M. Dean, G. Schreiber, Editors, W3C Recommendation, 10 February 2004. Latest version available at http://www.w3.org/TR/owl-ref/.
[RDF-CONCEPTS]
Resource Description Framework (RDF): Concepts and Abstract Syntax, Klyne G., Carroll J. (Editors), W3C Recommendation, 10 February 2004, http://www.w3.org/TR/2004/REC-rdf-concepts-20040210/. Latest version available at http://www.w3.org/TR/rdf-concepts/.

[RDF-SEMANTICS]
RDF Semantics, Patrick Hayes, Editor, W3C Recommendation, 10 February 2004, http://www.w3.org/TR/2004/REC-rdf-mt-20040210/. Latest version available at http://www.w3.org/TR/rdf-mt/.

[RDF-SCHEMA]
RDF Vocabulary Description Language 1.0: RDF Schema, Brian McBride, Editor, W3C Recommendation 10 February 2004, http://www.w3.org/TR/rdf-schema/.

[RFC-3066]
RFC 3066 - Tags for the Identification of Languages, H. Alvestrand, IETF, January 2001. This document is at http://www.isi.edu/in-notes/rfc3066.txt.

[RFC-3987]
RFC 3987 - Internationalized Resource Identifiers (IRIs), M. Duerst and M. Suignard, IETF, January 2005. This document is at http://www.ietf.org/rfc/rfc3987.txt.

[RIF-BLD]
RIF Basic Logic Dialect, Boley H. and Kifer M. (Editors), W3C Rule Interchange Format Working Group Draft. Latest Version available at http://www.w3.org/2005/rules/wiki/BLD.

[RIF-Core]
RIF Core Dialect, Boley H., Hallmark G., Kifer M., Paschke A., Polleres A., Reynolds, D. (Editors), W3C Rule Interchange Format Working Group Draft. Latest Version available at http://www.w3.org/2005/rules/wiki/Core.

[RIF-DTB]
RIF Datatypes and Built-Ins 1.0, Polleres A., Boley H. and Kifer M. (Editors), W3C Rule Interchange Format Working Group Draft. Latest Version available at http://www.w3.org/2005/rules/wiki/DTB.

[RIF-PRD]
RIF Production Rule Dialect, de Saint Marie C., Paschke A. and Hallmark G. (Editors), W3C Rule Interchange Format Working Group Draft. Latest Version available at http://www.w3.org/2005/rules/wiki/PRD.

[RIF-RDF+OWL]
RIF RDF and OWL Compatibility, de Bruijn, J. (Editor), W3C Rule Interchange Format Working Group Draft. Latest Version available at http://www.w3.org/2005/rules/wiki/SWC.

[XML1.0]
Extensible Markup Language (XML) 1.0 (Fourth Edition), W3C Recommendation, World Wide Web Consortium, 16 August 2006, edited in place 29 September 2006. This version is http://www.w3.org/TR/2006/REC-xml-20060816/.

[XML-Base]
XML Base, W3C Recommendation, World Wide Web Consortium, 27 June 2001. This version is http://www.w3.org/TR/2001/REC-xmlbase-20010627/. The latest version is available at http://www.w3.org/TR/xmlbase/.

6.2 Informational References

[ANF01]
Normal Form Conventions for XML Representations of Structured Data, Henry S. Thompson. October 2001.

[APP96]
Strong and Explicit Negation in Non-Monotonic Reasoning and Logic Programming, J.J. Alferes, L.M. Pereira, and T.C. Przymusinski. Lecture Notes In Computer Science, vol. 1126. Proceedings of the European Workshop on Logics in Artificial Intelligence, 1996.

[Clark87]
Negation as failure, K. Clark. Readings in nonmonotonic reasoning, Morgan Kaufmann Publishers, pages 311 - 325, 1987. (Originally published in 1978.)

[CK95]
Sorted HiLog: Sorts in Higher-Order Logic Data Languages, W. Chen, M. Kifer. Sixth Intl. Conference on Database Theory, Prague, Czech Republic, January 1995, Lecture Notes in Computer Science 893, Springer Verlag, pp. 252--265.

[CKW93]
HiLog: A Foundation for higher-order logic programming, W. Chen, M. Kifer, D.S. Warren. Journal of Logic Programming, vol. 15, no. 3, February 1993, pp. 187--230.

[CURIE]
CURIE Syntax 1.0: A syntax for expressing Compact URIs, Mark Birbeck, Shane McCarron. W3C Working Draft 2 April 2008. Available at http://www.w3.org/TR/curie/.

[CycL]
The Syntax of CycL, Web site. Available at http://www.cyc.com/cycdoc/ref/cycl-syntax.html.

[Enderton01]
A Mathematical Introduction to Logic, Second Edition, H. B. Enderton. Academic Press, 2001.

[FL2]
FLORA-2: An Object-Oriented Knowledge Base Language, M. Kifer. Web site. Available at http://flora.sourceforge.net.

[GL88]
The Stable Model Semantics for Logic Programming, M. Gelfond and V. Lifschitz. Logic Programming: Proceedings of the Fifth Conference and Symposium, pages 1070-1080, 1988.

[GRS91]
The Well-Founded Semantics for General Logic Programs, A. Van Gelder, K.A. Ross, J.S. Schlipf. Journal of ACM, 38:3, pages 620-650, 1991.

[KLW95]
Logical foundations of object-oriented and frame-based languages, M. Kifer, G. Lausen, J. Wu. Journal of ACM, July 1995, pp. 741--843.

[Lloyd87]
Foundations of Logic Programming (Second Edition), J.W. Lloyd, Springer-Verlag, 1987.

[Mendelson97]
Introduction to Mathematical Logic, Fourth Edition, E. Mendelson. Chapman & Hall, 1997.

[NxBRE]
.NET Business Rule Engine, Web site. Available at http://nxbre.wiki.sourceforge.net/.

[OOjD]
Object-Oriented jDREW, Web site. Available at http://www.jdrew.org/oojdrew/.

[RDFSYN04]
RDF/XML Syntax Specification (Revised), Dave Beckett, Editor, W3C Recommendation, 10 February 2004, http://www.w3.org/TR/2004/REC-rdf-syntax-grammar-20040210/. Latest version available at http://www.w3.org/TR/rdf-syntax-grammar/.

[RF99]
A Tight, Practical Integration of Relations and Functions, H. Boley, Springer-Verlag, 1999.

[Shoham87]
Nonmonotonic logics: meaning and utility, Y. Shoham. Proc. 10th International Joint Conference on Artificial Intelligence, Morgan Kaufmann, pp. 388--393, 1987.

[Steele90]
Common LISP: The Language, Second Edition, G. L. Steele Jr. Digital Press, 1990.

[SWSL-Rules]
Semantic Web Services Language (SWSL), S. Battle, A. Bernstein, H. Boley, B. Grosof, M. Gruninger, R. Hull, M. Kifer, D. Martin, S. McIlraith, D. McGuinness, J. Su, S. Tabet. W3C Member Submission, September 2005. Available at http://www.w3.org/Submission/SWSF-SWSL/.

[TRT03]
Object-Oriented RuleML: User-Level Roles, URI-Grounded Clauses, and Order-Sorted Terms, H. Boley. Springer LNCS 2876, Oct. 2003, pp. 1-16. Preprint at http://iit-iti.nrc-cnrc.gc.ca/publications/nrc-46502_e.html.

[vEK76]
The semantics of predicate logic as a programming language, M. van Emden and R. Kowalski. Journal of the ACM 23 (1976), 733-742.

[WSML-Rules]
Web Service Modeling Language (WSML), J. de Bruijn, D. Fensel, U. Keller, M. Kifer, H. Lausen, R. Krummenacher, A. Polleres, L. Predoiu. W3C Member Submission, June 2005. Available at http://www.w3.org/Submission/WSML/.

7 Appendix: XML Schema for RIF-FLD

The namespace of RIF is http://www.w3.org/2007/rif#.

XML schemas for the RIF-FLD language are defined below and are also available here with additional examples. For modularity, we define a Baseline schema and a Skyline schema. Baseline is the schema module that provides the foundation up to FORMULAs without Implies. Skyline provides the full schema by augmenting Baseline with the Implies FORMULA as well as with Group and Document.


7.1 Baseline Schema Module

 <?xml version="1.0" encoding="UTF-8"?>
 
 <xs:schema 
  xmlns:xs="http://www.w3.org/2001/XMLSchema"
  xmlns="http://www.w3.org/2007/rif#"
  targetNamespace="http://www.w3.org/2007/rif#"
  elementFormDefault="qualified"
  version="Id: FLDBaseline.xsd, v. 1.0, 2009-06-01, hboley/dhirtle">
 
  <xs:annotation>
    <xs:documentation>

    This is the Baseline module of FLD. It is the foundation of the full schema
    defined through the Skyline module. The Baseline XML schema is based on the
    following EBNF (compared to the full EBNF of RIF-FLD, Group and Document are
    omitted, and 'Implies' is missing from the productions for FORMULA and TERMULA).
    
    The nonterminals starting with NEW provide extensions points for FLD
    (cf. Section 4 XML Serialization Framework).
 
  FORMULA        ::= IRIMETA? CONNECTIVE '(' FORMULA* ')' |
                     IRIMETA? QUANTIFIER '(' FORMULA ')' |
                     IRIMETA? 'Neg' FORMULA |
                     IRIMETA? 'Naf' FORMULA |
                     IRIMETA?  FORMULA '@' MODULEREF |
                     FORM
  FORM           ::= IRIMETA? (Var | ATOMIC |
                               'External' '(' ATOMIC LOCATOR? ')')
  ATOMIC         ::= Const | Atom | Equal | Member | Subclass | Frame
  Atom           ::= UNITERM
  UNITERM        ::= TERMULA '(' (TERMULA* | (Name '->' TERMULA)*) ')'
  Equal          ::= TERMULA '=' TERMULA
  Member         ::= TERMULA '#' TERMULA
  Subclass       ::= TERMULA '##' TERMULA
  Frame          ::= TERMULA '[' (TERMULA '->' TERMULA)* ']'
  TERMULA        ::= IRIMETA? CONNECTIVE '(' TERMULA* ')' |
                     IRIMETA? QUANTIFIER '(' TERMULA ')' |
                     IRIMETA? 'Neg' TERMULA |
                     IRIMETA? 'Naf' TERMULA |
                     IRIMETA? TERMULA '@' MODULEREF |
                     TERM
  TERM           ::= IRIMETA? (Var | EXPRIC | List |
                               'External' '(' EXPRIC LOCATOR? ')' |
                               AGGREGATE | NEWTERM)
  EXPRIC         ::= Const | Expr | Equal | Member | Subclass | Frame
  Expr           ::= UNITERM
  List           ::= 'List' '(' TERM* ')' | 'List' '(' TERM+ '|' TERM ')'
  AGGREGATE      ::= AGGRFUNC '{' Var ('[' Var+ ']')? '|' FORMULA '}'
  Const          ::= '"' UNICODESTRING '"^^' SYMSPACE | CONSTSHORT
  MODULEREF      ::= Var | Const | Expr
  CONNECTIVE     ::= 'And' | 'Or' | NEWCONNECTIVE
  QUANTIFIER     ::= ('Exists' | 'Forall' | NEWQUANTIFIER) Var*
  AGGRFUNC       ::= 'Min' | 'Max' | 'Sum' | 'Prod' | 'Avg' | 'Count' |
                     'Set' | 'Bag' | NEWAGGRFUNC
  Name           ::= UNICODESTRING
  Var            ::= '?' UNICODESTRING
  SYMSPACE       ::= ANGLEBRACKIRI | CURIE
  LOCATOR        ::= ANGLEBRACKIRI
  
  IRIMETA        ::= '(*' Const? (Frame | 'And' '(' Frame* ')')? '*)'


    </xs:documentation>
  </xs:annotation>
  
  <xs:group name="FORMULA">  
    <!--
                              'Implies' omitted from Baseline schema, allowing its modular use 
  FORMULA        ::= IRIMETA? CONNECTIVE '(' FORMULA* ')' |
                     IRIMETA? QUANTIFIER '(' FORMULA ')' |
                     IRIMETA? 'Neg' FORMULA |
                     IRIMETA? 'Naf' FORMULA |
                     IRIMETA?  FORMULA '@' MODULEREF
                     FORM
  CONNECTIVE     ::= 'And' | 'Or' | NEWCONNECTIVE
  QUANTIFIER     ::= ('Exists' | 'Forall' | NEWQUANTIFIER) Var* 
             rewritten as
  FORMULA        ::= IRIMETA? 'And' '(' FORMULA* ')' |
                     IRIMETA? 'Or' '(' FORMULA* ')' |
                     IRIMETA? 'NEWCONNECTIVE' '(' FORMULA* ')' |
                     IRIMETA? 'Exists' Var* '(' FORMULA ')' |
                     IRIMETA? 'Forall' Var* '(' FORMULA ')' |
                     IRIMETA? 'NEWQUANTIFIER' Var* '(' FORMULA ')' |
                     IRIMETA? 'Neg' FORMULA |
                     IRIMETA? 'Naf' FORMULA |
                     IRIMETA? 'Remote' '(' FORMULA MODULEREF ')'
                     FORM
    -->
    <xs:choice>
      <xs:element name="And" type="And-FORMULA.type"/>
      <xs:element name="Or" type="Or-FORMULA.type"/>
      <xs:element name="NEWCONNECTIVE" type="NEWCONNECTIVE-FORMULA.type"/>
      <xs:element name="Exists" type="Exists-FORMULA.type"/>
      <xs:element name="Forall" type="Forall-FORMULA.type"/>
      <xs:element name="NEWQUANTIFIER" type="NEWQUANTIFIER-FORMULA.type"/>    
      <xs:element name="Neg" type="Neg-FORMULA.type"/>
      <xs:element name="Naf" type="Naf-FORMULA.type"/>
      <xs:element name="Remote" type="Remote-FORMULA.type"/>
      <xs:group ref="FORM"/>
    </xs:choice>
  </xs:group>

  <xs:complexType name="And-FORMULA.type">
  <!-- sensitive to FORMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element name="formula" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Or-FORMULA.type">
  <!-- sensitive to FORMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element name="formula" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="NEWCONNECTIVE-FORMULA.type">
  <!-- sensitive to FORMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element name="formula" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
  </xs:complexType>
  
  <xs:complexType name="Exists-FORMULA.type">
  <!-- sensitive to FORMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="declare" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="formula"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Forall-FORMULA.type">
  <!-- sensitive to FORMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="declare" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="formula"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="NEWQUANTIFIER-FORMULA.type">
  <!-- sensitive to FORMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="declare" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="formula"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Neg-FORMULA.type">
    <!-- sensitive to FORMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="formula" minOccurs="1" maxOccurs="1"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Naf-FORMULA.type">
    <!-- sensitive to FORMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="formula" minOccurs="1" maxOccurs="1"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Remote-FORMULA.type">
    <!-- sensitive to FORMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="formula"/>
      <xs:element ref="internal"/>
    </xs:sequence>
  </xs:complexType>

  <xs:element name="internal">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERM"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:complexType name="External-FORMULA.type">
    <!-- sensitive to FORMULA (Atom | Frame) context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element name="content" type="content-FORMULA.type"/>
    </xs:sequence>
  </xs:complexType>
  
  <xs:complexType name="content-FORMULA.type">
    <!-- sensitive to FORMULA (Atom | Frame) context-->
    <xs:sequence>
      <xs:choice>
        <xs:element ref="Atom"/>
        <xs:element ref="Frame"/>
      </xs:choice>
    </xs:sequence>
  </xs:complexType>
  
  <xs:element name="formula">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="FORMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="declare">
    <xs:complexType>
      <xs:sequence>
        <xs:element ref="Var"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:group name="FORM">  
    <!--
  FORM           ::= IRIMETA? (Var | ATOMIC |
                               'External' '(' ATOMIC LOCATOR? ')')
    -->
    <xs:choice>
      <xs:element ref="Var"/>
      <xs:group ref="ATOMIC"/>
      <xs:element name="External" type="External-FORM.type"/>
    </xs:choice>
  </xs:group>
 
  <xs:complexType name="External-FORM.type">
    <!-- sensitive to FORM (ATOMIC) context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element name="content" type="content-FORM.type"/>
      <xs:element ref="location" minOccurs="0" maxOccurs="1"/>
    </xs:sequence>
  </xs:complexType>
  
  <xs:complexType name="content-FORM.type">
    <!-- sensitive to FORM (ATOMIC) context-->
    <xs:sequence>
      <xs:group ref="ATOMIC"/>
    </xs:sequence>
  </xs:complexType>
 
  <xs:group name="ATOMIC">
    <!--
  ATOMIC         ::= Const | Atom | Equal | Member | Subclass | Frame
    -->
    <xs:choice>
      <xs:element ref="Const"/>
      <xs:element ref="Atom"/>
      <xs:element ref="Equal"/>
      <xs:element ref="Member"/>
      <xs:element ref="Subclass"/>
      <xs:element ref="Frame"/>
    </xs:choice>
  </xs:group>
  
  <xs:element name="Atom">
    <!--
  Atom           ::= UNITERM
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="UNITERM"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>  
  
  <xs:group name="UNITERM">
    <!--
  UNITERM        ::= TERMULA '(' (TERMULA* | (Name '->' TERMULA)*) ')'
    -->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="op"/>
      <xs:choice>
        <xs:element ref="args" minOccurs="0" maxOccurs="1"/>
        <xs:element name="slot" type="slot-UNITERM.type" minOccurs="0" maxOccurs="unbounded"/>
      </xs:choice>
    </xs:sequence>
  </xs:group>
 
  <xs:element name="op">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="args">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA" minOccurs="0" maxOccurs="unbounded"/>
      </xs:sequence>
      <xs:attribute name="ordered" type="xs:string" fixed="yes"/>
    </xs:complexType>
  </xs:element>
 
  <xs:complexType name="slot-UNITERM.type">
    <!-- sensitive to UNITERM (Name) context-->
    <xs:sequence>
      <xs:element ref="Name"/>
      <xs:group ref="TERMULA"/>
    </xs:sequence>
    <xs:attribute name="ordered" type="xs:string" fixed="yes"/>
  </xs:complexType>
 
  <xs:element name="Equal">
    <!--
  Equal          ::= TERMULA '=' TERMULA
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
        <xs:element ref="left"/>
        <xs:element ref="right"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="left">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="right">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="Member">
    <!--
  Member         ::= TERMULA '#' TERMULA
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
        <xs:element ref="instance"/>
        <xs:element ref="class"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="Subclass">
    <!--
  Subclass       ::= TERMULA '##' TERMULA
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
        <xs:element ref="sub"/>
        <xs:element ref="super"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="instance">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="class">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="sub">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="super">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
    
  <xs:element name="Frame">
    <!--
  Frame          ::= TERMULA '[' (TERMULA '->' TERMULA)* ']'
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
        <xs:element ref="object"/>
        <xs:element name="slot" type="slot-Frame.type" minOccurs="0" maxOccurs="unbounded"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="object">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:complexType name="slot-Frame.type">
    <!-- sensitive to Frame (TERMULA) context-->
    <xs:sequence>
      <xs:group ref="TERMULA"/>
      <xs:group ref="TERMULA"/>
    </xs:sequence>
    <xs:attribute name="ordered" type="xs:string" fixed="yes"/>
  </xs:complexType>

  <xs:group name="TERMULA">  
    <!--
                              'Implies' omitted from Baseline schema, allowing its modular use
  TERMULA        ::= IRIMETA? CONNECTIVE '(' TERMULA* ')' |
                     IRIMETA? QUANTIFIER '(' TERMULA ')' |
                     IRIMETA? 'Neg' TERMULA |
                     IRIMETA? 'Naf' TERMULA |
                     IRIMETA? TERMULA '@' MODULEREF |
                     TERM
  CONNECTIVE     ::= 'And' | 'Or' | NEWCONNECTIVE
  QUANTIFIER     ::= ('Exists' | 'Forall' | NEWQUANTIFIER) Var* 
             rewritten as
  TERMULA        ::= IRIMETA? 'And' '(' TERMULA* ')' |
                     IRIMETA? 'Or' '(' TERMULA* ')' |
                     IRIMETA? 'NEWCONNECTIVE' '(' TERMULA* ')' |
                     IRIMETA? 'Exists' Var* '(' TERMULA ')' |
                     IRIMETA? 'Forall' Var* '(' TERMULA ')' |
                     IRIMETA? 'NEWQUANTIFIER' Var* '(' TERMULA ')' |
                     IRIMETA? 'Neg' TERMULA |
                     IRIMETA? 'Naf' TERMULA |
                     IRIMETA? 'Remote' '(' TERMULA MODULEREF ')'
                     TERM
    -->
    <xs:choice>
      <xs:element name="And" type="And-TERMULA.type"/>
      <xs:element name="Or" type="Or-TERMULA.type"/>
      <xs:element name="NEWCONNECTIVE" type="NEWCONNECTIVE-TERMULA.type"/>
      <xs:element name="Exists" type="Exists-TERMULA.type"/>
      <xs:element name="Forall" type="Forall-TERMULA.type"/>
      <xs:element name="NEWQUANTIFIER" type="NEWQUANTIFIER-TERMULA.type"/>    
      <xs:element name="Neg" type="Neg-TERMULA.type"/>
      <xs:element name="Naf" type="Naf-TERMULA.type"/>
      <xs:element name="Remote" type="Remote-TERMULA.type"/>
      <xs:group ref="TERM"/>
    </xs:choice>
  </xs:group>

  <xs:complexType name="And-TERMULA.type">
  <!-- sensitive to TERMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element name="termula" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Or-TERMULA.type">
  <!-- sensitive to TERMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element name="termula" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="NEWCONNECTIVE-TERMULA.type">
  <!-- sensitive to TERMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element name="termula" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
  </xs:complexType>
  
  <xs:complexType name="Exists-TERMULA.type">
  <!-- sensitive to TERMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="declare" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="termula"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Forall-TERMULA.type">
  <!-- sensitive to TERMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="declare" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="termula"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="NEWQUANTIFIER-TERMULA.type">
  <!-- sensitive to TERMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="declare" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="termula"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Neg-TERMULA.type">
    <!-- sensitive to TERMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="termula" minOccurs="1" maxOccurs="1"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Naf-TERMULA.type">
    <!-- sensitive to TERMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="termula" minOccurs="1" maxOccurs="1"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Remote-TERMULA.type">
    <!-- sensitive to TERMULA context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="termula"/>
      <xs:element ref="internal"/>
    </xs:sequence>
  </xs:complexType>

  <xs:element name="termula">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:group name="TERM">  
    <!--
  TERM           ::= IRIMETA? (Var | EXPRIC | List |
                               'External' '(' EXPRIC LOCATOR? ')' |
                               AGGREGATE | NEWTERM)
    -->
    <xs:choice>
      <xs:element ref="Var"/>
      <xs:group ref="EXPRIC"/>
      <xs:element ref="List"/>
      <xs:element name="External" type="External-TERM.type"/>
      <xs:element ref="AGGREGATE"/>
      <xs:element ref="NEWTERM"/>
    </xs:choice>
  </xs:group>

  <xs:element name="List">  
    <!--
  List           ::= 'List' '(' TERM* ')' | 'List' '(' TERM+ '|' TERM ')'
             rewritten as
  List           ::= 'List' '(' LISTELEMENTS? ')'
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="LISTELEMENTS" minOccurs="0" maxOccurs="1"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:group name="LISTELEMENTS">
    <!--
  LISTELEMENTS   ::= TERM+ ('|' TERM)?
    -->
    <xs:sequence>
      <xs:group ref="TERM" minOccurs="1" maxOccurs="unbounded"/>
      <xs:element ref="rest" minOccurs="0" maxOccurs="1"/>
    </xs:sequence>
  </xs:group>

  <xs:element name="rest">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="TERM"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:complexType name="External-TERM.type">
    <!-- sensitive to TERM (EXPRIC) context-->
    <xs:sequence>
      <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      <xs:element name="content" type="content-TERM.type"/>
      <xs:element ref="location" minOccurs="0" maxOccurs="1"/>
    </xs:sequence>
  </xs:complexType>
  
  <xs:complexType name="content-TERM.type">
    <!-- sensitive to TERM (EXPRIC) context-->
    <xs:sequence>
      <xs:group ref="EXPRIC"/>
    </xs:sequence>
  </xs:complexType>
 
  <xs:group name="EXPRIC">
    <!--
  EXPRIC         ::= Const | Expr | Equal | Member | Subclass | Frame
    -->
    <xs:choice>
      <xs:element ref="Const"/>
      <xs:element ref="Expr"/>
      <xs:element ref="Equal"/>
      <xs:element ref="Member"/>
      <xs:element ref="Subclass"/>
      <xs:element ref="Frame"/>
    </xs:choice>
  </xs:group>
 
  <xs:element name="Expr">
    <!--
  Expr           ::= UNITERM
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="UNITERM"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:element name="AGGREGATE" abstract="true">
    <!--
  AGGREGATE      ::= AGGRFUNC '{' Var ('[' Var+ ']')? '|' FORMULA '}'
  AGGRFUNC       ::= 'Min' | 'Max' | 'Sum' | 'Prod' | 'Avg' | 'Count' |
                     'Set' | 'Bag' | NEWAGGRFUNC
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
        <xs:element ref="declare" minOccurs="2" maxOccurs="unbounded"/>
        <xs:element ref="formula"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  <xs:element name="Min" substitutionGroup="AGGREGATE"/>
  <xs:element name="Max" substitutionGroup="AGGREGATE"/>
  <xs:element name="Sum" substitutionGroup="AGGREGATE"/>
  <xs:element name="Prod" substitutionGroup="AGGREGATE"/>
  <xs:element name="Avg" substitutionGroup="AGGREGATE"/>
  <xs:element name="Count" substitutionGroup="AGGREGATE"/>
  <xs:element name="Set" substitutionGroup="AGGREGATE"/>
  <xs:element name="Bag" substitutionGroup="AGGREGATE"/>
  <xs:element name="NEWAGGRFUNC" substitutionGroup="AGGREGATE"/>
 
  <xs:element name="NEWTERM">
    <!--
    This uses the XSD wildcard schema component, any, allowing a NEWTERM
    to have zero or more child elements (role tags).
    -->
    <xs:complexType>
     <xs:sequence>
      <xs:any processContents="skip" minOccurs="0" maxOccurs="unbounded"/>
     </xs:sequence>
    </xs:complexType>
  </xs:element> 
 
  <xs:element name="Const">
    <!--
  Const          ::= '"' UNICODESTRING '"^^' SYMSPACE | CONSTSHORT
    -->
    <xs:complexType mixed="true">
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      </xs:sequence>
      <xs:attribute name="type" type="xs:anyURI" use="required"/>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="Name" type="xs:string">
    <!--
  Name           ::= UNICODESTRING
    -->
  </xs:element>
 
  <xs:element name="Var">
    <!--
  Var            ::= '?' UNICODESTRING
    -->
    <xs:complexType mixed="true">
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:group name="IRIMETA">
    <!--
  IRIMETA   ::= '(*' Const? (Frame | 'And' '(' Frame* ')')? '*)'
    -->
    <xs:sequence>
      <xs:element ref="id" minOccurs="0" maxOccurs="1"/>
      <xs:element ref="meta" minOccurs="0" maxOccurs="1"/>
    </xs:sequence>
  </xs:group>
 
  <xs:element name="id">
    <xs:complexType>
      <xs:sequence>
        <xs:element ref="Const"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="meta">
    <xs:complexType>
     <xs:choice>
       <xs:element ref="Frame"/>
       <xs:element name="And" type="And-meta.type"/>
     </xs:choice>
    </xs:complexType>
  </xs:element>
  
  <xs:complexType name="And-meta.type">
  <!-- sensitive to meta (Frame) context-->
    <xs:sequence>
      <xs:element name="formula" type="formula-meta.type" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
  </xs:complexType>
 
  <xs:complexType name="formula-meta.type">
    <!-- sensitive to meta (Frame) context-->
    <xs:sequence>
      <xs:element ref="Frame"/>
    </xs:sequence>
  </xs:complexType>
  
  <xs:complexType name="IRICONST.type" mixed="true">
    <!-- sensitive to location/id context-->
    <xs:sequence/>
    <xs:attribute name="type" type="xs:anyURI" use="required" fixed="http://www.w3.org/2007/rif#iri"/>
  </xs:complexType>

  <xs:element name="location">  
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="LOCATOR"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:group name="LOCATOR">
    <xs:sequence>
      <xs:element name="Const" type="ANYURICONST.type"/>   <!-- type="&xs;anyURI" -->
    </xs:sequence>
  </xs:group>

  <xs:complexType name="ANYURICONST.type" mixed="true">
    <!-- sensitive to location/profile context-->
    <xs:sequence/>
    <xs:attribute name="type" type="xs:anyURI" use="required" fixed="http://www.w3.org/2001/XMLSchema#anyURI"/>
  </xs:complexType>
 
 </xs:schema>

7.2 Skyline Schema Module

 <?xml version="1.0" encoding="UTF-8"?>
 
 <xs:schema 
  xmlns:xs="http://www.w3.org/2001/XMLSchema"
  xmlns="http://www.w3.org/2007/rif#"
  targetNamespace="http://www.w3.org/2007/rif#"
  elementFormDefault="qualified"
  version="Id: FLDSkyline.xsd, v. 1.0, 2009-06-01, hboley/dhirtle">
 
  <xs:annotation>
    <xs:documentation>
 
    This is the Skyline schema module of FLD. It is split off from the Baseline
    schema for modularity. The Skyline XML schema is based on the following EBNF
    (which adds Group and Document, and brings 'Implies' into FORMULA and TERMULA):
 
  Document       ::= IRIMETA? 'Document' '(' Dialect? Base? Prefix* Import* Module* Group? ')'
  Dialect        ::= 'Dialect' '(' Name ')'
  Base           ::= 'Base' '(' ANGLEBRACKIRI ')'  
  Prefix         ::= 'Prefix' '(' Name ANGLEBRACKIRI ')'
  Import         ::= IRIMETA? 'Import' '(' LOCATOR PROFILE? ')'
  Module         ::= IRIMETA? 'Module' '(' (Const | Expr) LOCATOR ')'
  Group          ::= IRIMETA? 'Group' '(' (FORMULA | Group)* ')'
  Implies        ::= IRIMETA? FORMULA ':-' FORMULA
  FORMULA        ::= Implies |
                     IRIMETA? CONNECTIVE '(' FORMULA* ')' |
                     IRIMETA? QUANTIFIER '(' FORMULA ')' |
                     IRIMETA? 'Neg' FORMULA |
                     IRIMETA? 'Naf' FORMULA |
                     IRIMETA?  FORMULA '@' MODULEREF |
                     FORM
  TERMULA        ::= Implies |
                     IRIMETA? CONNECTIVE '(' TERMULA* ')' |
                     IRIMETA? QUANTIFIER '(' TERMULA ')' |
                     IRIMETA? 'Neg' TERMULA |
                     IRIMETA? 'Naf' TERMULA |
                     IRIMETA? TERMULA '@' MODULEREF |
                     TERM
  PROFILE        ::= ANGLEBRACKIRI
      
    Note that this is an extension of the syntax for the Baseline schema (FLDBaseline.xsd).
    </xs:documentation>
  </xs:annotation>
 
  <!-- The Skyline schema includes the Baseline schema from the same directory -->
  <xs:include schemaLocation="FLDBaseline.xsd"/>
 
  <!-- The Skyline schema extends, with Implies, the FORMULA group of the Baseline schema -->
  <xs:redefine schemaLocation="FLDBaseline.xsd">
    <!--
  FORMULA        ::= Implies |
                     IRIMETA? CONNECTIVE '(' FORMULA* ')' |
                     IRIMETA? QUANTIFIER '(' FORMULA ')' |
                     IRIMETA? 'Neg' FORMULA |
                     IRIMETA? 'Naf' FORMULA |
                     IRIMETA?  FORMULA '@' MODULEREF |
                     FORM
    -->
    <xs:group name="FORMULA">
      <xs:choice>
        <xs:group ref="FORMULA"/>
        <xs:element ref="Implies"/>
      </xs:choice>
    </xs:group>
  </xs:redefine>
 
  <!-- The Skyline schema extends, with Implies, the TERMULA group of the Baseline schema -->
  <xs:redefine schemaLocation="FLDBaseline.xsd">
    <!--
  TERMULA        ::= Implies |
                     IRIMETA? CONNECTIVE '(' TERMULA* ')' |
                     IRIMETA? QUANTIFIER '(' TERMULA ')' |
                     IRIMETA? 'Neg' TERMULA |
                     IRIMETA? 'Naf' TERMULA |
                     IRIMETA? TERMULA '@' MODULEREF |
                     TERM
    -->
    <xs:group name="TERMULA">
      <xs:choice>
        <xs:group ref="TERMULA"/>
        <xs:element ref="Implies"/>
      </xs:choice>
    </xs:group>
  </xs:redefine> 

  <xs:element name="Document">
    <!--
  Document       ::= IRIMETA? 'Document' '(' Dialect? Base? Prefix* Import* Module* Group? ')'
  Dialect        ::= 'Dialect' '(' Name ')'  represented with a dialect attribute.
  Base and Prefix represented directly in XML.
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
	<xs:element ref="directive" minOccurs="0" maxOccurs="unbounded"/>
        <xs:element ref="payload" minOccurs="0" maxOccurs="1"/>
      </xs:sequence>
      <xs:attribute name="dialect" type="xs:string"/>
    </xs:complexType>
  </xs:element>

  <xs:element name="directive">
   <xs:complexType>
     <xs:choice>
       <xs:element ref="DIRECTIVE-IMPORT"/>
       <xs:element ref="DIRECTIVE-MODULE"/>
     </xs:choice>
   </xs:complexType>
 </xs:element>

 <xs:element name="DIRECTIVE-IMPORT">
   <xs:complexType>
    <xs:sequence>
      <xs:element ref="Import"/>
    </xs:sequence>
   </xs:complexType>
 </xs:element>

 <xs:element name="DIRECTIVE-MODULE">
   <xs:complexType>
    <xs:sequence>
      <xs:element ref="Module"/>
    </xs:sequence>
   </xs:complexType>
 </xs:element>

  <xs:element name="payload">
    <xs:complexType>
      <xs:sequence>
        <xs:element ref="Group"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="Import">
    <!--
  Import    ::= IRIMETA? 'Import' '(' LOCATOR PROFILE? ')'
  LOCATOR   ::= ANGLEBRACKIRI
  PROFILE   ::= ANGLEBRACKIRI
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/> 
        <xs:element ref="location"/>
        <xs:element ref="profile" minOccurs="0" maxOccurs="1"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="Module">
    <!--
  Module         ::= IRIMETA? 'Module' '(' (Const | Expr) LOCATOR ')'
  LOCATOR   ::= ANGLEBRACKIRI
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/> 
        <xs:choice>
          <xs:element ref="Const"/>
          <xs:element ref="Expr"/>
        </xs:choice>
        <xs:element ref="location"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="profile">
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Const" type="ANYURICONST.type"/>   <!-- type="&xs;anyURI" -->
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="Group">
    <!--
  Group          ::= IRIMETA? 'Group' '(' (FORMULA | Group)* ')'
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
        <xs:element ref="sentence" minOccurs="0" maxOccurs="unbounded"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="sentence">
   <xs:complexType>
     <xs:choice>
       <xs:group ref="FORMULA"/>
       <xs:element ref="Group"/>
     </xs:choice>
   </xs:complexType>
 </xs:element>
    
 <xs:element name="Implies">
    <!--
  Implies        ::= IRIMETA? FORMULA ':-' FORMULA
    -->
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="IRIMETA" minOccurs="0" maxOccurs="1"/>
        <xs:element ref="if"/>
        <xs:element ref="then"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
 
  <xs:element name="if">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="FORMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  
  <xs:element name="then">
    <xs:complexType>
      <xs:sequence>
        <xs:group ref="FORMULA"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
   
 </xs:schema>