High Resolution Time

Abstract

This specification defines an API that provides the time origin, and current time in sub-millisecond resolution, such that it is not subject to system clock skew or adjustments.

Status of This Document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at https://www.w3.org/TR/.

This document was published by the Web Performance Working Group as a Working Draft. This document is intended to become a W3C Recommendation.

GitHub Issues are preferred for discussion of this specification.

Publication as a Working Draft does not imply endorsement by the W3C Membership.

This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

This document was produced by a group operating under the 1 August 2017 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.

This document is governed by the 15 September 2020 W3C Process Document.

1. Introduction

This section is non-normative.

The ECMAScript Language specification [ECMA-262] defines the Date object as a time value representing time in milliseconds since 01 January, 1970 UTC. For most purposes, this definition of time is sufficient as these values represent time to millisecond precision for any instant that is within approximately 285,616 years from 01 January, 1970 UTC. The DOMTimeStamp is defined similarly [WEBIDL].

In practice, these definitions of time are subject to both clock skew and adjustment of the system clock. The value of time may not always be monotonically increasing and subsequent values may either decrease or remain the same.

For example, the following script may record a positive number, negative number, or zero for computed duration:

Example 1

var mark_start = Date.now();
doTask(); // Some task
var duration = Date.now() - mark_start;

For certain tasks this definition of time may not be sufficient as it does not allow for sub-millisecond resolution and is subject to system clock skew. For example:

When attempting to accurately measure the elapsed time of navigating to a Document, fetching of resources or execution of script, a monotonically increasing clock with sub-millisecond resolution is desired.
When calculating the animation state from script, developers will need to accurately know the amount of time that has elapsed in the animation in order to properly update the next scene of the animation.
When calculating the frame rate of a script based animation, developers will need sub-millisecond resolution in order to determine if an animation is drawing at 60 FPS. Without sub-millisecond resolution, a developer can only determine if an animation is drawing at 58.8 FPS or 62.5 FPS.
When attempting to cue audio to a specific point in an animation or ensure that the audio is synchronized with the animation, developers will need to accurately know the amount of time elapsed in the animation and audio.
When multiple contexts need to synchronize work with sub-millisecond resolution (e.g. when using Worker or SharedWorker workers to drive animation, audio, etc., in a renderer context), or to create a unified view of the event timeline.

This specification does not propose changing the behavior of Date.now() [ECMA-262] as it is genuinely useful in determining the current value of the calendar time and has a long history of usage. The DOMHighResTimeStamp type, performance.now method, and performance.timeOrigin attributes of the Performance interface resolve the above issues by providing monotonically increasing time values with sub-millisecond resolution.

1.1 Examples

This section is non-normative.

A developer may wish to construct a timeline of their entire application, including events from Worker or SharedWorker, which have different time origins. To display such events on the same timeline, the application can translate the DOMHighResTimeStamps with the help of the performance.timeOrigin attribute.

Example 2

// ---- worker.js -----------------------------
// Shared worker script
onconnect = function(e) {
  var port = e.ports[0];
  port.onmessage = function(e) {
    // Time execution in worker
    var task_start = performance.now();
    result = runSomeWorkerTask();
    var task_end = performance.now();
  }

  // Send results and epoch-relative timestamps to another context
  port.postMessage({
    'task': 'Some worker task',
    'start_time': task_start + performance.timeOrigin,
    'end_time': task_end + performance.timeOrigin,
    'result': result
  });
}

// ---- application.js ------------------------
// Timing tasks in the document
var task_start = performance.now();
runSomeApplicationTask();
var task_end = performance.now();

// developer provided method to upload runtime performance data
reportEventToAnalytics({
  'task': 'Some document task',
  'start_time': task_start,
  'duration': task_end - task_start
});

// Translating worker timestamps into document's time origin
var worker = new SharedWorker('worker.js');
worker.port.onmessage = function (event) {
  var msg = event.data;

  // translate epoch-relative timestamps into document's time origin
  msg.start_time = msg.start_time - performance.timeOrigin;
  msg.end_time = msg.end_time - performance.timeOrigin;

  reportEventToAnalytics(msg);
}

2. Time Origin

The time origin is the time value from which time is measured:

If the global object is a Window object, the time origin MUST be equal to:
- the time when the browsing context is first created if there is no previous document;
- otherwise, the time of the user confirming the navigation during the previous document's prompt to unload algorithm, if a previous document exists and if the confirmation dialog was displayed;
- otherwise, the time of starting the navigation responsible for loading the Window object's newest Document object.
If the global object is a WorkerGlobalScope object, the time origin MUST be equal to the official moment of creation of the worker.
Otherwise, the time origin is undefined.

The time origin timestamp is the high resolution time value at which time origin is zero. To obtain the time origin timestamp given a global object (global):

Assert that global's time origin is not undefined.
Let t1 be the DOMHighResTimeStamp representing the high resolution time at which the global monotonic clock is zero.
Let t2 be the DOMHighResTimeStamp representing the high resolution time value of the global monotonic clock at global's time origin.
Return the sum of t1 and t2.

Note

The time origin timestamp and the value returned by Date.now() executed at "zero time" can differ because the former is recorded with respect to a global monotonic clock that is not subject to system and user clock adjustments, clock skew, and so on—see § 6. Monotonic Clock.

The relative high resolution time given a DOMHighResTimeStamp time and a global object global, runs the following steps:

Let diff be the difference between time and the global's time origin.
Return diff.

The current high resolution time given a global object current global returns the result of relative high resolution time where time is the present time and global is current global.

3. The `DOMHighResTimeStamp` typedef

The DOMHighResTimeStamp type is used to store a time value in milliseconds, measured relative from the time origin, global monotonic clock, or a time value that represents a duration between two DOMHighResTimeStamps.

WebIDLtypedef double DOMHighResTimeStamp;

A DOMHighResTimeStamp SHOULD represent a time in milliseconds accurate enough to allow measurement while preventing timing attacks - see § 7.1 Clock resolution for additional considerations.

4. The `Performance` interface

WebIDL[Exposed=(Window,Worker)]
interface Performance : EventTarget {
    DOMHighResTimeStamp now();
    readonly attribute DOMHighResTimeStamp timeOrigin;
    [Default] object toJSON();
};

4.1 `now()` method

The now() method MUST return the current high resolution time.

4.2 `timeOrigin` attribute

The timeOrigin attribute MUST return a DOMHighResTimeStamp representing the high resolution time of the time origin timestamp for the relevant global object of the Performance object.

4.3 `toJSON()` method

When toJSON() is called, run [WEBIDL]'s default toJSON steps.

6. Monotonic Clock

The time values returned when calling the now() method on Performance objects with the same time origin MUST use the same monotonic clock that is monotonically increasing and not subject to system clock adjustments or system clock skew. The difference between any two chronologically recorded time values returned from the Performance.now() method MUST never be negative if the two time values have the same time origin.

The time values returned when getting performance.timeOrigin MUST use the same global monotonic clock that is shared by time origins, is monotonically increasing and not subject to system clock adjustments or system clock skew, and whose reference point is the [ECMA-262] time definition - see § 7. Privacy and Security.

Note

The user agent can reset its global monotonic clock across browser restarts, or whenever starting an isolated browsing session—e.g. incognito or similar browsing mode. As a result, developers should not use global timestamps as absolute time that holds its monotonic properties across all past, present, and future contexts; in practice, the monotonic properties only apply for contexts that can reach each other by exchanging messages via one of the provided messaging mechanisms - e.g. postMessage, BroadcastChannel, etc.

Note

In certain scenarios (e.g. when a tab is backgrounded), the user agent may choose to throttle timers and periodic callbacks run in that context or even freeze them entirely. Any such throttling should not affect the resolution or accuracy of the time returned by the monotonic clock.

7. Privacy and Security

7.1 Clock resolution

Access to accurate timing information, both for measurement and scheduling purposes, is a common requirement for many applications. For example, coordinating animations, sound, and other activity on the page requires access to high-resolution time to provide a good user experience. Similarly, measurement enables developers to track the performance of critical code components, detect regressions, and so on.

However, access to the same accurate timing information can sometimes be also used for malicious purposes by an attacker to guess and infer data that they can't see or access otherwise. For example, cache attacks, statistical fingerprinting and microarchitectural attacks are a privacy and security concern where a malicious web site may use high resolution timing data of various browser or application-initiated operations to differentiate between subset of users, identify a particular user or reveal unrelated but same-process user data - see [CACHE-ATTACKS] and [SPECTRE] for more background.

This specification defines an API that provides sub-millisecond time resolution, which is more accurate than the previously available millisecond resolution exposed by DOMTimeStamp. However, even without this new API an attacker may be able to obtain high-resolution estimates through repeat execution and statistical analysis. To ensure that the new API does not significantly improve the accuracy or speed of such attacks, the minimum resolution of the DOMHighResTimeStamp type should be inaccurate enough to prevent attacks: the current minimum recommended resolution is no less than 5 microseconds and, where necessary, should be set higher by the User Agent to address privacy and security concerns due to architecture or software constraints, or other considerations.

In order to mitigate such attacks user agents may deploy any technique they deem necessary. Deployment of those techniques may vary based on the browser's architecture, the user's device, the content and its ability to maliciously read cross-origin data, or other practical considerations.

These techniques may include:

Resolution reduction.
Added jitter.
Abuse detection and/or API call throttling.

Mitigating such timing side-channel attacks entirely is practically impossible: either all operations would have to execute in a time that does not vary based on the value of any confidential information, or the application would need to be isolated from any time-related primitives (clock, timers, counters, etc). Neither is practical due to the associated complexity for the browser and application developers and the associated negative effects on performance and responsiveness of applications.

Note

Clock resolution is an unsolved and evolving area of research, with no existing industry consensus or definitive set of recommendations that applies to all browsers. To track the discussion, refer to Issue 79.

7.2 Clock drift

This specification also defines an API that provides sub-millisecond time resolution of the zero time of the time origin, which requires and exposes a global monotonic clock to the application, and that must be shared across all the browser contexts. The global monotonic clock does not need to be tied to physical time, but is recommended to be set with respect to the [ECMA-262] definition of time to avoid exposing new fingerprint entropy about the user — e.g. this time can already be easily obtained by the application, whereas exposing a new logical clock provides new information.

However, even with the above mechanism in place, the global monotonic clock may provide additional clock drift resolution. Today, the application can timestamp the time-of-day and monotonic time values (via Date.now() and Performance.now()) at multiple points within the same context and observe drift between them—e.g. due to automatic or user clock adjustments. With the Performance.timeOrigin attribute, the attacker can also compare the time at which time origin is zero, as reported by the global monotonic clock, against the current time-of-day estimate of when it is zero (i.e. the difference between Date.now()-performance.now() and performance.timeOrigin) and potentially observe clock drift between these clocks over a longer time period.

In practice, the same time drift can be observed by an application across multiple navigations: the application can record the logical time in each context and use a client or server time synchronization mechanism to infer changes in the user's clock. Similarly, lower-layer mechanisms such as TCP timestamps may reveal the same high-resolution information to the server without the need for multiple visits. As such, the information provided by this API should not expose any significant or previously unavailable entropy about the user.

Chrome	6+
Chrome Android	18+
Edge	12+
Edge Mobile	?
Firefox	7+
Firefox Android	15+
Internet Explorer	9+
Opera	15+
Opera Android	14+
Safari	8+
Safari iOS	9+
Samsung Internet	1.0+
WebView Android	Yes

Chrome	6+
Chrome Android	18+
Edge	12+
Edge Mobile	?
Firefox	7+
Firefox Android	7+
Internet Explorer	9+
Opera	15+
Opera Android	14+
Safari	8+
Safari iOS	9+
Samsung Internet	1.0+
WebView Android	1+

Chrome	?
Chrome Android	25+
Edge	12+
Edge Mobile	?
Firefox	15+
Firefox Android	15+
Internet Explorer	10+
Opera	15+
Opera Android	14+
Safari	8+
Safari iOS	9+
Samsung Internet	1.5+
WebView Android	Yes

Chrome	62+
Chrome Android	62+
Edge	16+
Edge Mobile	?
Firefox	53+
Firefox Android	53+
Internet Explorer	No
Opera	49+
Opera Android	46+
Safari	No
Safari iOS	No
Samsung Internet	8.0+
WebView Android	62+

Chrome	56+
Chrome Android	56+
Edge	12+
Edge Mobile	?
Firefox	25+
Firefox Android	25+
Internet Explorer	?
Opera	No
Opera Android	No
Safari	No
Safari iOS	No
Samsung Internet	6.0+
WebView Android	56+

High Resolution Time

W3C Working Draft 01 October 2020

Abstract

Status of This Document

1. Introduction

1.1 Examples

2. Time Origin

3. The `DOMHighResTimeStamp` typedef

4. The `Performance` interface

4.1 `now()` method

4.2 `timeOrigin` attribute

4.3 `toJSON()` method

5. Extensions to `WindowOrWorkerGlobalScope` mixin

5.1 The `performance` attribute

6. Monotonic Clock

7. Privacy and Security

7.1 Clock resolution

7.2 Clock drift

8. Conformance

9. IDL Index

A. Acknowledgments

B. References

B.1 Normative references

B.2 Informative references

High Resolution Time

W3C Working Draft 01 October 2020

Abstract

Status of This Document

1. Introduction

1.1 Examples

2. Time Origin

3. The DOMHighResTimeStamp typedef

4. The Performance interface

4.1 now() method

4.2 timeOrigin attribute

4.3 toJSON() method

5. Extensions to WindowOrWorkerGlobalScope mixin

5.1 The performance attribute

6. Monotonic Clock

7. Privacy and Security

7.1 Clock resolution

7.2 Clock drift

8. Conformance

9. IDL Index

A. Acknowledgments

B. References

B.1 Normative references

B.2 Informative references

3. The `DOMHighResTimeStamp` typedef

4. The `Performance` interface

4.1 `now()` method

4.2 `timeOrigin` attribute

4.3 `toJSON()` method

5. Extensions to `WindowOrWorkerGlobalScope` mixin

5.1 The `performance` attribute