6. XHTML Attribute Collections


This section is normative.

Many of the abstract modules in this document define the required attributes for their elements. The table below defines some collections of attributes that are referenced throughout the modules. These expressions should in no way be considered normative or mandatory. They are an editorial convenience for this document. When used in the remainder of this section, it is the expansion of the term that is normative, not the term itself.

The following basic attribute sets are used on many elements. In each case where they are used, their use is identified via their collection name.

6.1. Core Attribute Collection

class = ClassName
This attribute assigns one or more class names to an element; the element may be said to belong to these classes. A class name may be shared by several element instances.

The class attribute can be used for different purposes in XHTML, for instance as a style sheet selector (when an author wishes to assign style information to a set of elements), and for general purpose processing by user agents.

For instance in the following example, the p element is used in conjunction with the class attribute to identify a particular type of paragraph.

<p class="note">
These programs are only available if you have purchased
the advanced professional suite.

Style sheet rules can then be used to render the paragraph appropriately, for instance by putting a border around it, giving it a different background colour, or where necessary by not displaying it at all.

id = ID
The id attribute assigns an identifier to an element. The id of an element must be unique within a document.

The id attribute has several roles in XHTML:

As an example, the following headings are distinguished by their id values:

<h id="introduction">Introduction</h>
<h id="events">The Events Module</h>
title = Text
This attribute offers advisory information about the element for which it is set.

Values of the title attribute may be rendered by user agents in a variety of ways. For instance, visual browsers should display the title as a "tool tip" (a short message that appears when the pointing device pauses over an object). Audio user agents may speak the title information in a similar context.

Example of the use of title:

<a href="/Jakob/" title="Author biography">Jakob Nielsen</a>'s
Alertbox for January 11, 1998

The title attribute has an additional role when used with the link element to designate an external style sheet. See the section on links and style sheets for details.


A 'root of word' attribute for common

6.2. I18N Attribute Collection

xml:lang = LanguageCode
This attribute specifies the base language of an element's attribute values and text content. It is defined normatively in [XML] section 2.12. The default value of this attribute is unspecified.

An element inherits language code information according to the following order of precedence (highest to lowest):

In this example, the primary language of the document is French ("fr"). One paragraph is declared to be in US English ("en-us"), after which the primary language returns to French. The following paragraph includes an embedded Japanese ("ja") phrase, after which the primary language returns to French.

<html xmlns="http://www.w3.org/2002/06/xhtml2" xml:lang="fr">
   <title>Un document multilingue</title>
<p>...Interpreted as French...</p>
<p xml:lang="en-us">...Interpreted as US English...</p>
<p>...Interpreted as French again...</p>
<p>...French text interrupted by<em xml:lang="ja">some
         Japanese</em>French begins here again...</p>

6.3. Bi-directional Text Collection

dir = "ltr|rtl|lro|rlo"
This attribute specifies the base direction of the element's text content. This direction overrides the inherent directionality of characters as defined in [UNICODE], and defines directional properties of text as defined by CSS2 [CSS2]. Possible values:


improve bidi example

<p dir="ltr">
I received the following email:
<l dir="lro">english werbeh english</l>
<l dir="lro">werbeh english werbeh</l>

6.4. Edit Collection

This collection allows elements to carry information indicating how, when and why content has changed.

edit = "inserted|deleted|changed|moved"
This attribute allows elements to carry information indicating how content has changed. Possible values:

The default presentation for an element with edit="deleted" is display: none (in other words, it is not displayed) although an alternate style might display it as crossed through. The other three values cause no special presentation by default, though an alternate style might use background colors or other text decoration to indicate the changed text.


I will do it next weekmonth.

datetime = Datetime
The value of this attribute specifies the date and time when a change was made.


cite = URI
The value of this attribute is a URI that designates a source document or message. This attribute is intended to give further information about the element's contents (e.g., the source from which a quotation was borrowed, or the reason text was inserted or deleted). User Agents should provide a means for the user to access the further information.



6.5. Hypertext Attribute Collection

This collection allows an element to be the start point of a hypertext link to a remote resource.


<abbr href="http://www.w3.org/" title="World Wide Web">WWW</abbr>
<li href="contents.xhtml">contents</li>
<span href="http://www.cwi.nl/~steven/amsterdam.html">Amsterdam</span>
<quote href="hamlet.xhtml#p2435">To be or not to be</quote>
<var href="#index_ninc">ninc</var>
href = URI
This attribute specifies a URL that is actuated when the element is activated.


<abbr title="World Wide Web" href="http://www.w3.org/">WWW</abbr>
target = HrefTarget
This attribute identifies an environment that will act as the destination for a resource identified by a hyperlink when it is activated.

This specification does not define how this attribute gets used, since that is defined by the environment that the hyperlink is actuated in. See for instance XFrames [XFRAMES].


<a href="home.html" target="main">Home</a>
rel = LinkTypes
This attribute describes the relationship from the current document to the URI referred to by the element. The value of this attribute is a space-separated list of link types.
rev = LinkTypes
This attribute is used to describe a reverse link from the anchor specified by the href attribute to the current document. The value of this attribute is a space-separated list of link types.
accesskey = Character
This attribute assigns an access key to an element. An access key is a single character from the document character set. Note. Authors should consider the input method of the expected reader when specifying an accesskey.

Pressing an access key assigned to an element gives focus to the element. The action that occurs when an element receives focus depends on the element. For example, when a user activates a link defined by the a element, the user agent generally follows the link. When a user activates a radio button, the user agent changes the value of the radio button. When the user activates a text field, it allows input, etc.

In this example, we assign the access key "C" to a link. Typing this access key takes the user to another document, in this case, a table of contents.

<p accesskey="C" 
  Table of Contents

The invocation of access keys depends on the underlying system. For instance, on machines running MS Windows, one generally has to press the "alt" key in addition to the access key. On Apple systems, one generally has to press the "cmd" key in addition to the access key.

The rendering of access keys depends on the user agent. We recommend that authors include the access key in label text or wherever the access key is to apply. User agents should render the value of an access key in such a way as to emphasize its role and to distinguish it from other characters (e.g., by underlining it).


Actuation of elements with accesskey
navindex = Number
This attribute specifies the position of the current element in the navigation order for the current document. This value must be a number between 0 and 32767. User agents must ignore leading zeros.

The navigation order defines the order in which elements will receive focus when navigated by the user via the keyboard. The navigation order may include elements nested within other elements.

Elements that may receive focus should be navigated by user agents according to the following rules:

  1. Those elements that support the navindex attribute and assign a positive value to it are navigated first. Navigation proceeds from the element with the lowest navindex value to the element with the highest value. Values need not be sequential nor need they begin with any particular value. Elements that have identical navindex values should be navigated in the order they appear in the character stream.
  2. Those elements that do not support the navindex attribute or support it and assign it a value of "0" are navigated next. These elements are navigated in the order they appear in the character stream.

When a document is loaded using a URL that includes a fragment reference (such as book.html#chapter5) navigation begins at the point the fragment begins. If the user has moved away from that point (for instance using page up or page down), the navigation starting point is undefined.

The following example would allow the links to be navigated in column order (without the use of navindex they would be navigated in document, i.e. row, order):

<tr><td href="a" navindex="1">NW</td>
    <td href="c" navindex="3">NE</td></tr>
<tr><td href="b" navindex="2">SW</td>
    <td href="d" navindex="4">SE</td></tr>

Navigation keys. The actual key sequence that causes navigation or element activation depends on the configuration of the user agent (e.g., the "tab" key might be used for navigation and the "enter" key or "space" key used to activate a selected element).

User agents may also define key sequences to navigate the navigation order in reverse. When the end (or beginning) of the navigation order is reached, user agents may circle back to the beginning (or end).

xml:base = URI
This attribute specifies the base URI from which to resolve relative URIs. It is normatively defined in [XMLBASE]. Any relative URI used on an element that uses this attribute, or on an element contained within an element that uses this attribute, shall be resolved relative to the base URI defined by this attribute.

An element inherits URI base information according to the following order of precedence (highest to lowest):


<ul xml:base="http://www.w3.org">
<li href="/">The W3C home page</li>
<li href="/TR">The W3C Technical Reports page</li>
<li href="/Markup">The HTML home page</li>
<li href="/Markup/Forms">The XForms home page</li>

6.6. Embedding Attribute Collection

This collection causes the contents of a remote resource to be embedded in the document in place of the element's content. If accessing the remote resource fails, for whatever reason (network unavailable, no resource available at the URI given, inability of the user agent to process the type of resource) the content of the element must be processed instead.


<p src="holiday.png" type="image/png">
    <span src="holiday.gif" type="image.gif">
        An image of us on holiday.
src = URI
This attribute specifies the location of an external source for the contents of the element.
type = ContentType

This attribute specifies the allowable content types of the relevant src URI. At its most general, it is a comma-separated list of media ranges with optional accept parameters, as defined in section 14.1 of [RFC2616] as the field value of the accept request header.

In its simplest case, this is just a media type, such as "image/png" or "application/xml", but it may also contain asterisks, such as "image/*" or "*/*", or lists of acceptable media types, such as "image/png, image/gif, image/jpeg".

The user agent must take this list, and combine it with its own list of acceptable media types by taking the intersection, and then use the resulting list as the field value of the accept request header when requesting the resource.

For instance, if the attribute specifies the value "image/png, image/gif, image/jpeg", but the user agent does not accept images of type "image/gif" then the resultant accept header would contain "image/png, image/jpeg".

If this attribute is not present, "*/*" is used for its value.

For the current list of registered content types, please consult [MIMETYPES].


<script src="pop" type="application/x-javascript, text/x-newspeak"/>

<style src="midnight" type="text/css, text/x-mystyle"/>

<p src="w3c-logo" type="image/png, image/jpeg;q=0.2">W3C logo</p>

<span src="logo.png">Our logo</span>

6.7. Image Map Attribute Collection

This collection adds attributes that specify that an embedded image may be used as an image map, so that clicking on different parts of the image causes different hyperlinks to be activated.

usemap = URI
This attribute associates an image map with an element. The image map is defined by a map element. The value of usemap must match the value of the id attribute of the associated map element.
ismap = "ismap"
This attribute indicates that the associated image is to be treated as a "server-side image map". When selected, the coordinates within the element that the user selected are sent to the server where the document resides. Screen coordinates are expressed as screen pixel values relative to the image, and start at (0,0) at the top left corner.

In the following example, the active region defines a server-side link. Thus, a click anywhere on the image will cause the click's coordinates to be sent to the server.

<p href="http://www.example.com/cgi-bin/map"
      src="map.png" ismap="ismap">
   Our location.

The location clicked is passed to the server as follows. The user agent derives a new URI from the URI specified by the href attribute of the a element, by appending `?' followed by the x and y coordinates, separated by a comma. The link is then followed using the new URI. For instance, in the given example, if the user clicks at the location x=10, y=27 then the derived URI is "http://www.example.com/cgi-bin/competition?10,27".

User agents that do not offer the user a means to select specific coordinates (e.g., non-graphical user agents that rely on keyboard input, speech-based user agents, etc.) should send the coordinates "0,0" to the server when the link is activated.

shape = "default|rect|circle|poly"
This attribute specifies the shape of a region. Possible values:
coords = Coordinates
This attribute specifies the position and shape of the area. The number and order of values depends on the shape being defined. Possible combinations:

Coordinates are relative to the top, left corner of the object. All values are of type Length. All values are separated by commas.

Note that in the following example, if the image is unavailable for any reason, the fallback properties of the href attribute mean that the <nl> will be displayed instead of the image, thus making the page still useful:

<html xmlns="http://www.w3.org/2002/06/xhtml2">
      <title>The cool site!</title>
     <p src="navbar1.png" type="image/png" usemap="#map1"> 
       <map id="map1">
           <label>Navigate the site:</label>
           <li href="guide.html" shape="rect" coords="0,0,118,28">
           Access Guide</li> 
           <li href="shortcut.html" shape="rect" coords="118,0,184,28">
           <li href="search.html" shape="circle" coords="184,200,60">
           <li href="top10.html" shape="poly" coords="276,0,276,28,100,200,50,50,276,0">
           Top Ten</li>

Note that an li in an nl is not required to have an href attribute. In that case, the relevant region of the image is inactive:

<p href="image.png" type="image/png" usemap="#map1">
   <nl id="map1">
   <li shape="circle" coords="100,200,50">I'm inactive.</li>
   <li href="outer-ring-link.html" shape="circle" coords="100,200,250">I'm active.</li>

Allow any element to be an image map?

Should we allow any element (such as <p>) that contains a number of hyperlinks to be an image map?


Can we define ismap better?

Require UA to give feedback on regions

Should a UA be required to give feedback on the regions when hovering?

6.8. Events

The global attributes from [XMLEVENTS] are included in the Events attribute collection. The normative definition of those attributes and their semantics is included in that specification. They are described briefly below:

defaultAction = cancel|perform
This attribute defines whether or not the default action associated with the event should be processed. The default value is perform
event = CDATA
This attribute defines the event type that is being listened for. The set of legal names for XHTML 2 is to be defined.

List of XHTML 2 Events Needed

We need to define the list of XHTML 2 events and map them into the XHTML DOM. activate, load, focusIn, focusOut, ...
handler = IDREF
This attribute specifies the ID of a handler element that defines the action that should be performed if the event reaches the observer.
observer = IDREF
This attribute specifies an ID for an observer element for which the listener is to be registered.
phase = capture|default
This attribute specifies the phase of event propagation in which to process the event. If not specified, the default value of this attribute is default.
propagate = stop|continue
This attribute specifies whether an event should stop propagating after this observer processes it, or continue for possible further processing. The default value of this attribute is continue.
target = IDREF
This attribute specifies the id of the target element of the event (i.e., the node that caused the event). If not specified, the default value of this attribute is the element on which the event attribute is specified.

Note that these attributes are not in the XHTML namespace. Instead, they are in the XML Events namespace. The XHTML namespace is the default namespace for XHTML documents, so XHTML elements and attributes do not require namespace prefixes (although they are permitted). XML Events attributes MUST use a prefix, since they are not in the default namespace of the document.

6.9. Common Attribute Collection

This collection assembles the Core, I18N, Events, Edit, Embedding, Bi-directional, and Hypertext attribute collections defined above.