previous   next   contents  

Appendix A. SMIL 3.0 DTDs

A zip archive of the SMIL 2.1 DTDs is also available.

Informative tables of elements content for SMIL2.1 profiles (Language Profile, Mobile Profile and Extended Mobile Profile) are provided for user convenience.

Note: This Appendix has not yet been updated. The following Module DTDs are the SMIL 2.1 DTD.
It will be updated in a future version.

This section is Normative.


Table of contents

A.1 A.1 SMIL 2.1 Module DTDs:

A.1.1 A.1.1 The SMIL Animation Module

<!-- ====================================================================== -->
<!-- SMIL Animation Module  =============================================== -->
<!-- file: SMIL-anim.mod

  This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Animation//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-anim.mod"

     ====================================================================== -->


<!-- ============================= Dependencies =========================== -->
<!-- The integrating profile is expected to define the following entities,
     Unless the defaults provided are sufficient.
 -->

<!-- SMIL.SplineAnimation.module entity:  Define as "INCLUDE" if the integrating
     profile includes the SMIL 2.1 SplineAnimation Module, "IGNORE" if not.
     The default is "IGNORE", i.e. by default SplineAnimation is not included
     in the integrating language profile.
 -->
<!ENTITY % SMIL.SplineAnimation.module "IGNORE">

<!-- Animation depends on SMIL Timing, importing the attributes listed
     in the SMIL.AnimationTime.attrib entity.  If the integrating profile does 
     include the SMIL.MinMaxTiming.module, its default value includes the 
     attributes defined in SMIL.BasicInlineTiming.attrib and 
         SMIL.MinMaxTiming.attrib.  Otherwise, it is defaulted to 
         SMIL.BasicInlineTiming.attrib, which is the minimum requirement.
     
     Note that the profile can override these defaults by redefining 
     SMIL.AnimationTime.attrib.  The profile is also expected to define 
     SMIL.fill.attrib and SMIL.fillDefault.attrib.
 -->
<!ENTITY % SMIL.MinMaxTiming.module "IGNORE">
<![%SMIL.MinMaxTiming.module;[
  <!ENTITY % SMIL.AnimationTime.attrib "
        %SMIL.BasicInlineTiming.attrib;
        %SMIL.BasicInlineTiming-deprecated.attrib;
        %SMIL.MinMaxTiming.attrib;
  ">
]]>
<!ENTITY % SMIL.AnimationTime.attrib "%SMIL.BasicInlineTiming.attrib;">
<!ENTITY % SMIL.fill.attrib "">

<!ENTITY % SMIL.animTimingAttrs "
  %SMIL.AnimationTime.attrib;             
  %SMIL.fill.attrib;            
  %SMIL.fillDefault.attrib;            
">

<!-- Language Designer chooses to integrate targetElement or xlink attributes.
     To integrate the targetElement attribute, define the entity
     animation-targetElement as "INCLUDE"; to integrate the XLink attributes,
     define animation-XLinkTarget as "INCLUDE".
     
     One or the other MUST be defined.  It is strongly recommended that only one
     of the two be defined.
-->

<!ENTITY % SMIL.animation-targetElement "IGNORE">
<![%SMIL.animation-targetElement;[
  <!ENTITY % SMIL.animTargetElementAttr
   "targetElement  IDREF  #IMPLIED"
  >
]]>
<!ENTITY % SMIL.animTargetElementAttr "">

<!ENTITY % SMIL.animation-XLinkTarget "IGNORE">
<![%SMIL.animation-XLinkTarget;[
  <!ENTITY % SMIL.animTargetElementXLink "
    actuate        (onRequest|onLoad)                  'onLoad' 
    href           %URI.datatype;                      #IMPLIED
    show           (new | embed | replace)             #FIXED 'embed'
    type           (simple | extended | locator | arc) #FIXED 'simple'
">
]]>
<!ENTITY % SMIL.animTargetElementXLink "">


<!-- ========================== Attribute Groups ========================== -->

<!-- All animation elements include these attributes -->
<!ENTITY % SMIL.animAttrsCommon
 "%Core.attrib;
  %I18n.attrib;
  %SMIL.Test.attrib;
  %SMIL.animTimingAttrs;
  %SMIL.animTargetElementAttr;
  %SMIL.animTargetElementXLink;"
>

<!-- All except animateMotion need an identified target attribute -->
<!ENTITY % SMIL.animAttrsNamedTarget
 "%SMIL.animAttrsCommon;
  attributeName  CDATA  #REQUIRED
  attributeType  CDATA  #IMPLIED"
>

<!-- All except set support the full animation-function specification,
     additive and cumulative animation.
     SplineAnimation adds the attributes keyTimes, keySplines and path,
         and the calcMode value "spline", to those of BasicAnimation.
 -->
<![%SMIL.SplineAnimation.module;[
  <!ENTITY % SMIL.splineAnimCalcModeValues "| spline">
  <!ENTITY % SMIL.splineAnimValueAttrs
   "keyTimes CDATA #IMPLIED
    keySplines CDATA #IMPLIED"
  >
  <!ENTITY % SMIL.splineAnimPathAttr
   "path CDATA #IMPLIED"
  >
]]>
<!ENTITY % SMIL.splineAnimCalcModeValues "">
<!ENTITY % SMIL.splineAnimValueAttrs "">
<!ENTITY % SMIL.splineAnimPathAttr "">

<!ENTITY % SMIL.animValueAttrs "
  %SMIL.BasicAnimation.attrib;
  calcMode   (discrete|linear|paced %SMIL.splineAnimCalcModeValues;) 'linear'
  %SMIL.splineAnimValueAttrs;
  additive   (replace | sum) 'replace'
  accumulate (none | sum) 'none'"
>


<!-- ========================== Animation Elements ======================== -->

<!ENTITY % SMIL.animate.attrib  "">
<!ENTITY % SMIL.animate.content "EMPTY">
<!ENTITY % SMIL.animate.qname   "animate">
<!ELEMENT %SMIL.animate.qname; %SMIL.animate.content;>
<!ATTLIST %SMIL.animate.qname; %SMIL.animate.attrib;
  %SMIL.animAttrsNamedTarget;
  %SMIL.animValueAttrs;
>

<!ENTITY % SMIL.set.attrib  "">
<!ENTITY % SMIL.set.content "EMPTY">
<!ENTITY % SMIL.set.qname   "set">
<!ELEMENT %SMIL.set.qname; %SMIL.set.content;>
<!ATTLIST %SMIL.set.qname; %SMIL.set.attrib;
  %SMIL.animAttrsNamedTarget;
  to  CDATA  #IMPLIED
>

<!ENTITY % SMIL.animateMotion.attrib  "">
<!ENTITY % SMIL.animateMotion.content "EMPTY">
<!ENTITY % SMIL.animateMotion.qname   "animateMotion">
<!ELEMENT %SMIL.animateMotion.qname; %SMIL.animateMotion.content;>
<!ATTLIST %SMIL.animateMotion.qname; %SMIL.animateMotion.attrib;
  %SMIL.animAttrsCommon;
  %SMIL.animValueAttrs;
  %SMIL.splineAnimPathAttr;
  origin  (default)  "default"
>


<!ENTITY % SMIL.animateColor.attrib  "">
<!ENTITY % SMIL.animateColor.content "EMPTY">
<!ENTITY % SMIL.animateColor.qname   "animateColor">
<!ELEMENT %SMIL.animateColor.qname; %SMIL.animateColor.content;>
<!ATTLIST %SMIL.animateColor.qname; %SMIL.animateColor.attrib;
  %SMIL.animAttrsNamedTarget;
  %SMIL.animValueAttrs;
>

<!-- ========================== End Animation ============================= -->
<!-- end of SMIL-anim.mod -->

A.1.2 A.1.2 The SMIL Content Control Module

<!-- ================================================================= -->
<!-- SMIL Content Control Module  ==================================== -->
<!-- file: SMIL-control.mod

      This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen, Aaron Cohen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Content Control//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-control.mod"

     ================================================================= -->

<!ENTITY % SMIL.BasicContentControl.module "INCLUDE">
<![%SMIL.BasicContentControl.module;[
  <!ENTITY % SMIL.switch.attrib "">
  <!ENTITY % SMIL.switch.content "EMPTY">
  <!ENTITY % SMIL.switch.qname "switch">
  
  <!ELEMENT %SMIL.switch.qname; %SMIL.switch.content;>
  <!ATTLIST %SMIL.switch.qname; %SMIL.switch.attrib;
        %Core.attrib;
        %I18n.attrib;
  >
]]>

<!-- ========================= CustomTest Elements ======================== -->
<!ENTITY % SMIL.CustomTestAttributes.module "IGNORE">
<![%SMIL.CustomTestAttributes.module;[

  <!ENTITY % SMIL.customTest.attrib "">
  <!ENTITY % SMIL.customTest.qname "customTest">
  <!ENTITY % SMIL.customTest.content "EMPTY">
  <!ELEMENT %SMIL.customTest.qname; %SMIL.customTest.content;>
  <!ATTLIST %SMIL.customTest.qname; %SMIL.customTest.attrib;
        defaultState (true|false)                   'false'
        override     (visible|hidden)               'hidden'
        uid          %URI.datatype;                 #IMPLIED
        %Core.attrib;
        %I18n.attrib;
  >
  <!ENTITY % SMIL.customAttributes.attrib "">
  <!ENTITY % SMIL.customAttributes.qname "customAttributes">
  <!ENTITY % SMIL.customAttributes.content "(customTest+)">
  <!ELEMENT %SMIL.customAttributes.qname; %SMIL.customAttributes.content;>
  <!ATTLIST %SMIL.customAttributes.qname; %SMIL.customAttributes.attrib;
        %Core.attrib;
        %I18n.attrib;
  >

]]> <!-- end of CustomTestAttributes -->

<!-- ========================= PrefetchControl Elements =================== -->
<!ENTITY % SMIL.PrefetchControl.module "IGNORE">
<![%SMIL.PrefetchControl.module;[
  <!ENTITY % SMIL.prefetch.attrib "">
  <!ENTITY % SMIL.prefetch.qname "prefetch">
  <!ENTITY % SMIL.prefetch.content "EMPTY">
  <!ELEMENT %SMIL.prefetch.qname; %SMIL.prefetch.content;>
  <!ATTLIST %SMIL.prefetch.qname; %SMIL.prefetch.attrib;
        src           %URI.datatype;    #IMPLIED
        mediaSize     CDATA             #IMPLIED
        mediaTime     CDATA             #IMPLIED
        bandwidth     CDATA             #IMPLIED
        %Core.attrib;
        %I18n.attrib;
  >
]]>

<!-- end of SMIL-control.mod -->



   

A.1.3 A.1.3 The SMIL Layout Module

   
<!-- ====================================================================== -->
<!-- SMIL 2.1 Layout Modules ============================================== -->
<!-- file: SMIL-layout.mod

        This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen, Aaron Cohen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

        This DTD module is identified by the PUBLIC and SYSTEM identifiers:

        PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Layout//EN"
        SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-layout.mod"

        =================================================================== -->

<!-- ================== BasicLayout ======================================= -->
<!-- ================== BasicLayout Profiling Entities ==================== -->
<!ENTITY % SMIL.layout.attrib       "">
<!ENTITY % SMIL.region.attrib       "">
<!ENTITY % SMIL.rootlayout.attrib   "">
<!ENTITY % SMIL.layout.content     "EMPTY">
<!ENTITY % SMIL.region.content     "EMPTY">
<!ENTITY % SMIL.rootlayout.content "EMPTY">

<!-- ================== BasicLayout Entities ============================== -->
<!ENTITY % SMIL.common-layout-attrs "
        height              CDATA    'auto'
        width               CDATA    'auto'
        %SMIL.backgroundColor.attrib;
">

<!ENTITY % SMIL.region-attrs "
        bottom              CDATA    'auto'
        left                CDATA    'auto'
        right               CDATA    'auto'
        top                 CDATA    'auto'
        z-index             CDATA    #IMPLIED
        showBackground      (always|whenActive) 'always'
        %SMIL.fit.attrib;
">

<!-- ================== BasicLayout Elements ============================== -->
<!--
     Layout contains the region and root-layout elements defined by
     smil-basic-layout or other elements defined by an external layout
     mechanism.
-->

<!ENTITY % SMIL.layout.qname "layout">
<!ELEMENT %SMIL.layout.qname; %SMIL.layout.content;>
<!ATTLIST %SMIL.layout.qname; %SMIL.layout.attrib;
        %Core.attrib;
        %I18n.attrib;
        type CDATA 'text/smil-basic-layout'
>

<!-- ================== Region Element ==================================== -->
<!ENTITY % SMIL.region.qname "region">
<!ELEMENT %SMIL.region.qname; %SMIL.region.content;>
<!ATTLIST %SMIL.region.qname; %SMIL.region.attrib;
        %Core.attrib;
        %I18n.attrib;
        %SMIL.backgroundColor-deprecated.attrib;
        %SMIL.common-layout-attrs;
        %SMIL.region-attrs;
        regionName CDATA #IMPLIED
>

<!-- ================== Root-layout Element =============================== -->
<!ENTITY % SMIL.root-layout.qname "root-layout">
<!ELEMENT %SMIL.root-layout.qname; %SMIL.rootlayout.content; >
<!ATTLIST %SMIL.root-layout.qname; %SMIL.rootlayout.attrib;
        %Core.attrib;
        %I18n.attrib;
        %SMIL.backgroundColor-deprecated.attrib;
        %SMIL.common-layout-attrs;
>


<!-- ================== AudioLayout ======================================= -->
<!ENTITY % SMIL.AudioLayout.module "IGNORE">
<![%SMIL.AudioLayout.module;[
  <!-- ================== AudioLayout Entities ============================ -->
  <!ENTITY % SMIL.audio-attrs "
        soundLevel                        CDATA    '100&#37;'
  ">

  <!-- ================ AudioLayout Elements ============================== -->
  <!-- ================ Add soundLevel to region element ================== -->
  <!ATTLIST %SMIL.region.qname; %SMIL.audio-attrs;>
]]> <!-- end AudioLayout.module -->


<!-- ================ MultiWindowLayout =================================== -->
<!ENTITY % SMIL.MultiWindowLayout.module "IGNORE">
<![%SMIL.MultiWindowLayout.module;[
  <!-- ============== MultiWindowLayout Profiling Entities ================ -->
  <!ENTITY % SMIL.topLayout.attrib    "">
  <!ENTITY % SMIL.topLayout.content   "EMPTY">
  
  <!-- ============== MultiWindowLayout Elements ========================== -->
  <!--================= topLayout element ================================= -->
  <!ENTITY % SMIL.topLayout.qname "topLayout">
  <!ELEMENT %SMIL.topLayout.qname; %SMIL.topLayout.content;>
  <!ATTLIST %SMIL.topLayout.qname; %SMIL.topLayout.attrib;
        %Core.attrib;
        %I18n.attrib;
        %SMIL.common-layout-attrs;
        close               (onRequest|whenNotActive) 'onRequest'
        open                (onStart|whenActive)      'onStart'
  >
]]> <!-- end MultiWindowLayout.module -->


<!-- ====================== AlignmentLayout =============================== -->
<!ENTITY % SMIL.AlignmentLayout.module "IGNORE">
<![%SMIL.AlignmentLayout.module;[
  <!-- ========== AlignmentLayout Profiling Entities ====================== -->
  <!ENTITY % SMIL.regPoint.attrib     "">
  <!ENTITY % SMIL.regPoint.content   "EMPTY">

  <!-- ============ AlignmentLayout Elements ============================== -->
  <!ENTITY % SMIL.regPoint.qname "regPoint">
  <!ELEMENT %SMIL.regPoint.qname; %SMIL.regPoint.content;>
  <!ATTLIST %SMIL.regPoint.qname; %SMIL.regPoint.attrib;
        %Core.attrib;
        %I18n.attrib;
        %SMIL.regAlign.attrib;
        bottom              CDATA    'auto'
        left                CDATA    'auto'
        right               CDATA    'auto'
        top                 CDATA    'auto'
  >
  <!ATTLIST %SMIL.region.qname;
       %SMIL.RegistrationPoint.attrib;
       %SMIL.soundAlign.attrib;
  >
]]> <!-- end AlignmentLayout.module -->

<!-- ================== BackgroundTilingLayout ============================ -->
<!ENTITY % SMIL.BackgroundTilingLayout.module "IGNORE">
<![%SMIL.BackgroundTilingLayout.module;[
  <!-- ================== BackgroundTilingLayout Entities ================= -->
  <!ENTITY % SMIL.BackgroundTiling-attrs "
    backgroundImage %URI.datatype; 'none'
    backgroundRepeat (repeat|repeatX|repeatY|noRepeat|inherit) 'repeat'
">

  <!-- ================ BackgroundTilingLayout Elements =================== -->
  <!-- ================ Add attributes to region element ================== -->
  <!ATTLIST %SMIL.region.qname; %SMIL.BackgroundTiling-attrs;>
  <!ATTLIST %SMIL.root-layout.qname; %SMIL.BackgroundTiling-attrs;>
  <![%SMIL.MultiWindowLayout.module;[
    <!ATTLIST %SMIL.topLayout.qname; %SMIL.BackgroundTiling-attrs;>
  ]]>
]]> <!-- end BackgroundTilingLayout.module -->




<!-- end of SMIL-layout.mod -->











 

A.1.4 A.1.4 The SMIL Linking Module

<!-- ====================================================================== -->
<!-- SMIL Linking Module  ================================================= -->
<!-- file: SMIL-link.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author: Jacco van Ossenbruggen, Lloyd Rutledge, Aaron Cohen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Linking//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-link.mod"

     ====================================================================== -->

<!-- ======================== LinkingAttributes Entities ================== -->
<!ENTITY % SMIL.linking-attrs "
        sourceLevel             CDATA               '100&#37;'
        destinationLevel        CDATA               '100&#37;'
        sourcePlaystate         (play|pause|stop)   #IMPLIED
        destinationPlaystate    (play|pause)        'play'
        show                    (new|pause|replace) 'replace'
        accesskey               %Character.datatype; #IMPLIED
        target                  CDATA                #IMPLIED
        external                (true|false)        'false'
        actuate                 (onRequest|onLoad)  'onRequest'
        %SMIL.tabindex.attrib;
">



<!-- ========================= BasicLinking Elements ====================== -->
<!ENTITY % SMIL.BasicLinking.module "IGNORE">
<![%SMIL.BasicLinking.module;[

  <!-- ======================= BasicLinking Entities ====================== -->
  <!ENTITY % SMIL.Shape "(rect|circle|poly|default)">
  <!ENTITY % SMIL.Coords "CDATA">
    <!-- comma separated list of lengths -->

  <!ENTITY % SMIL.a.attrib  "">
  <!ENTITY % SMIL.a.content "EMPTY">
  <!ENTITY % SMIL.a.qname   "a">
  <!ELEMENT %SMIL.a.qname; %SMIL.a.content;>
  <!ATTLIST %SMIL.a.qname; %SMIL.a.attrib;
    %SMIL.linking-attrs;
    href                      %URI.datatype;      #REQUIRED
    %Core.attrib;
    %I18n.attrib;
  >

  <!ENTITY % SMIL.area.attrib  "">
  <!ENTITY % SMIL.area.content "EMPTY">
  <!ENTITY % SMIL.area.qname   "area">
  <!ELEMENT %SMIL.area.qname; %SMIL.area.content;>
  <!ATTLIST %SMIL.area.qname; %SMIL.area.attrib;
    %SMIL.linking-attrs;
    shape                     %SMIL.Shape;             'rect'
    coords                    %SMIL.Coords;            #IMPLIED
    href                      %URI.datatype;      #IMPLIED
    nohref                    (nohref)            #IMPLIED
    %Core.attrib;
    %I18n.attrib;
  >

  <!ENTITY % SMIL.anchor.attrib  "">
  <!ENTITY % SMIL.anchor.content "EMPTY">
  <!ENTITY % SMIL.anchor.qname  "anchor">
  <!ELEMENT %SMIL.anchor.qname; %SMIL.anchor.content;>
  <!ATTLIST %SMIL.anchor.qname; %SMIL.anchor.attrib;
    %SMIL.linking-attrs;
    shape                     %SMIL.Shape;             'rect'
    coords                    %SMIL.Coords;            #IMPLIED
    href                      %URI.datatype;               #IMPLIED
    nohref                    (nohref)            #IMPLIED
    %Core.attrib;
    %I18n.attrib;
  >
]]> <!-- end of BasicLinking -->

<!-- ======================== ObjectLinking =============================== -->
<!ENTITY % SMIL.ObjectLinking.module "IGNORE">
<![%SMIL.ObjectLinking.module;[

  <!ENTITY % SMIL.Fragment "
    fragment                  CDATA               #IMPLIED
  ">

  <!-- ====================== ObjectLinking Elements ====================== -->
  <!-- add fragment attribute to area, and anchor elements -->
  <!ATTLIST %SMIL.area.qname;
      %SMIL.Fragment;
  >

  <!ATTLIST %SMIL.anchor.qname;
      %SMIL.Fragment;
  >
]]>
<!-- ======================== End ObjectLinking =========================== -->

<!-- end of SMIL-link.mod -->











  

A.1.5 A.1.5 The SMIL Media Object Module

<!-- ====================================================================== -->
<!-- SMIL 2.1 Media Objects Modules ======================================= -->
<!-- file: SMIL-media.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Rob Lanphier, Jacco van Ossenbruggen, Sjoerd Mullender
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Media Objects//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-media.mod"

     ====================================================================== -->

<!-- ================== Profiling Entities ================================ -->

<!ENTITY % SMIL.MediaClipping.module "IGNORE">
<![%SMIL.MediaClipping.module;[
  <!ENTITY % SMIL.mo-attributes-MediaClipping "
        %SMIL.MediaClip.attrib;
  ">
]]>
<!ENTITY % SMIL.mo-attributes-MediaClipping "">

<!ENTITY % SMIL.MediaClipping.deprecated.module "IGNORE">
<![%SMIL.MediaClipping.module;[
  <!ENTITY % SMIL.mo-attributes-MediaClipping-deprecated "
        %SMIL.MediaClip.attrib.deprecated;
  ">
  ]]>
<!ENTITY % SMIL.mo-attributes-MediaClipping-deprecated "">

<!ENTITY % SMIL.MediaParam.module "IGNORE">
<![%SMIL.MediaParam.module;[
  <!ENTITY % SMIL.mo-attributes-MediaParam "
        erase        (whenDone|never)   'whenDone'
        mediaRepeat  (preserve|strip)   'preserve'
        sensitivity   CDATA             'opaque'
  ">
  <!ENTITY % SMIL.param.qname "param">
  <!ELEMENT %SMIL.param.qname; EMPTY>

  <!ATTLIST %SMIL.param.qname; %SMIL.param.attrib;
    %Core.attrib;
    %I18n.attrib;
    name        CDATA          #IMPLIED
    value       CDATA          #IMPLIED
    valuetype   (data|ref|object) "data"
    type        %ContentType.datatype;  #IMPLIED
  >

  <!ENTITY % SMIL.paramGroup.content "(param*)">
  <!ENTITY % SMIL.paramGroup.attrib "">
  <!ENTITY % SMIL.paramGroup.qname "paramGroup">

  <!ELEMENT %SMIL.paramGroup.qname; %SMIL.paramGroup.content;>
  <!ATTLIST %SMIL.paramGroup.qname; %SMIL.paramGroup.attrib;
    %Core.attrib;
    %I18n.attrib;
  >
  
]]>
<!ENTITY % SMIL.mo-attributes-MediaParam "">

<!ENTITY % SMIL.MediaAccessibility.module "IGNORE">
<![%SMIL.MediaAccessibility.module;[
  <!ENTITY % SMIL.mo-attributes-MediaAccessibility "
        readIndex    CDATA           #IMPLIED
  ">
]]>
<!ENTITY % SMIL.mo-attributes-MediaAccessibility "">

<!ENTITY % SMIL.BasicMedia.module "INCLUDE">
<![%SMIL.BasicMedia.module;[
  <!ENTITY % SMIL.media-object.content "EMPTY">
  <!ENTITY % SMIL.media-object.attrib "">
  <!ENTITY % SMIL.soundAlign.attrib "">

  <!-- ================ Media Objects Entities ============================ -->

  <!ENTITY % SMIL.mo-attributes-BasicMedia "
        src             CDATA   #IMPLIED
        type            CDATA   #IMPLIED
  ">

  <!ENTITY % SMIL.mo-attributes "
        %Core.attrib;
        %I18n.attrib;
        %SMIL.Description.attrib;
        %SMIL.mo-attributes-BasicMedia;
        %SMIL.mo-attributes-MediaParam;
        %SMIL.mo-attributes-MediaAccessibility;
        %SMIL.media-object.attrib;
        %SMIL.soundAlign.attrib;
  ">

  <!--
     Most info is in the attributes, media objects are empty or
     have children defined at the language integration level:
  -->

  <!ENTITY % SMIL.mo-content "%SMIL.media-object.content;">

  <!-- ================ Media Objects Elements ============================ -->
  <!ENTITY % SMIL.ref.qname        "ref">
  <!ENTITY % SMIL.audio.qname      "audio">
  <!ENTITY % SMIL.img.qname        "img">
  <!ENTITY % SMIL.video.qname      "video">
  <!ENTITY % SMIL.text.qname       "text">
  <!ENTITY % SMIL.textstream.qname "textstream">
  <!ENTITY % SMIL.animation.qname  "animation">

  <!ENTITY % SMIL.ref.content        "%SMIL.mo-content;">
  <!ENTITY % SMIL.audio.content      "%SMIL.mo-content;">
  <!ENTITY % SMIL.img.content        "%SMIL.mo-content;">
  <!ENTITY % SMIL.video.content      "%SMIL.mo-content;">
  <!ENTITY % SMIL.text.content       "%SMIL.mo-content;">
  <!ENTITY % SMIL.textstream.content "%SMIL.mo-content;">
  <!ENTITY % SMIL.animation.content  "%SMIL.mo-content;">

  <!ELEMENT %SMIL.ref.qname;           %SMIL.ref.content;>
  <!ELEMENT %SMIL.audio.qname;         %SMIL.audio.content;>
  <!ELEMENT %SMIL.img.qname;           %SMIL.img.content;>
  <!ELEMENT %SMIL.video.qname;         %SMIL.video.content;>
  <!ELEMENT %SMIL.text.qname;          %SMIL.text.content;>
  <!ELEMENT %SMIL.textstream.qname;    %SMIL.textstream.content;>
  <!ELEMENT %SMIL.animation.qname;     %SMIL.animation.content;>

  <!ATTLIST %SMIL.img.qname;           
          %SMIL.mo-attributes-MediaClipping;
          %SMIL.mo-attributes-MediaClipping-deprecated;
          %SMIL.mo-attributes;
  >
  <!ATTLIST %SMIL.text.qname;          
          %SMIL.mo-attributes-MediaClipping;
          %SMIL.mo-attributes-MediaClipping-deprecated;
          %SMIL.mo-attributes;
  >
  <!ATTLIST %SMIL.ref.qname;           
          %SMIL.mo-attributes-MediaClipping;
          %SMIL.mo-attributes-MediaClipping-deprecated;
          %SMIL.mo-attributes;
  >
  <!ATTLIST %SMIL.audio.qname;         
          %SMIL.mo-attributes-MediaClipping;
          %SMIL.mo-attributes-MediaClipping-deprecated;
          %SMIL.mo-attributes;
  >
  <!ATTLIST %SMIL.video.qname;         
          %SMIL.mo-attributes-MediaClipping;
          %SMIL.mo-attributes-MediaClipping-deprecated;
          %SMIL.mo-attributes;
  >
  <!ATTLIST %SMIL.textstream.qname;    
          %SMIL.mo-attributes-MediaClipping;
          %SMIL.mo-attributes-MediaClipping-deprecated;
          %SMIL.mo-attributes;
  >
  <!ATTLIST %SMIL.animation.qname;     
          %SMIL.mo-attributes-MediaClipping;
          %SMIL.mo-attributes-MediaClipping-deprecated;
          %SMIL.mo-attributes;
  >
]]>
<!ENTITY % SMIL.mo-attributes-BasicMedia "">

<!-- BrushMedia -->
<!ENTITY % SMIL.BrushMedia.module "IGNORE">
<![%SMIL.BrushMedia.module;[
  <!ENTITY % SMIL.brush.attrib "">
  <!ENTITY % SMIL.brush.content "%SMIL.mo-content;">
  <!ENTITY % SMIL.brush.qname "brush">
  <!ELEMENT %SMIL.brush.qname; %SMIL.brush.content;>
  <!ATTLIST %SMIL.brush.qname; %SMIL.brush.attrib; 
        %Core.attrib;
        %I18n.attrib;
        %SMIL.Description.attrib;
        %SMIL.mo-attributes-MediaAccessibility;
        %SMIL.mo-attributes-MediaParam;
        %SMIL.media-object.attrib;
        color        CDATA            #IMPLIED
  >
]]>

<!-- end of SMIL-media.mod -->











  

A.1.6 A.1.6 The SMIL Metainformation Module

<!-- ================================================================ -->
<!-- SMIL Metainformation Module  =================================== -->
<!-- file: SMIL-metainformation.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author: Thierry Michel, Jacco van Ossenbruggen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This module declares the meta and metadata elements types and 
     its attributes, used to provide declarative document metainformation.
   
     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Metadata//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-metainformation.mod"

     ================================================================ -->


<!-- ================== Profiling Entities ========================== -->

<!ENTITY % SMIL.meta.content     "EMPTY">
<!ENTITY % SMIL.meta.attrib      "">
<!ENTITY % SMIL.meta.qname       "meta">

<!ENTITY % SMIL.metadata.content "EMPTY">
<!ENTITY % SMIL.metadata.attrib  "">
<!ENTITY % SMIL.metadata.qname   "metadata">

<!-- ================== meta element ================================ -->

<!ELEMENT %SMIL.meta.qname; %SMIL.meta.content;>
<!ATTLIST %SMIL.meta.qname; %SMIL.meta.attrib;
  %Core.attrib;
  %I18n.attrib;
  content CDATA #REQUIRED
  name CDATA #REQUIRED        
  >

<!-- ================== metadata element ============================ -->

<!ELEMENT %SMIL.metadata.qname; %SMIL.metadata.content;>
<!ATTLIST %SMIL.metadata.qname; %SMIL.metadata.attrib;
  %Core.attrib;
  %I18n.attrib;
>

<!-- end of SMIL-metadata.mod -->

A.1.7 A.1.7 The SMIL Structure Module

<!-- ====================================================================== -->
<!-- SMIL Structure Module  =============================================== -->
<!-- file: SMIL-struct.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author: Warner ten Kate, Jacco van Ossenbruggen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Structure//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-struct.mod"

     ===================================================================== -->

<!-- ================== SMIL Document Root =============================== -->
<!ENTITY % SMIL.smil.attrib  "" >
<!ENTITY % SMIL.smil.content "EMPTY" >
<!ENTITY % SMIL.smil.qname   "smil" >

<!ELEMENT %SMIL.smil.qname; %SMIL.smil.content;>
<!ATTLIST %SMIL.smil.qname; %SMIL.smil.attrib;
        %Core.attrib;
        %I18n.attrib;
        xmlns %URI.datatype; #REQUIRED 
>

<!-- ================== The Document Head ================================ -->
<!ENTITY % SMIL.head.content "EMPTY" >
<!ENTITY % SMIL.head.attrib  "" >
<!ENTITY % SMIL.head.qname   "head" >

<!ELEMENT %SMIL.head.qname; %SMIL.head.content;>
<!ATTLIST %SMIL.head.qname; %SMIL.head.attrib;
        %Core.attrib;
        %I18n.attrib;
>

<!--=================== The Document Body - Timing Root ================== -->
<!ENTITY % SMIL.body.content "EMPTY" >
<!ENTITY % SMIL.body.attrib  "" >
<!ENTITY % SMIL.body.qname   "body" >

<!ELEMENT %SMIL.body.qname; %SMIL.body.content;>
<!ATTLIST %SMIL.body.qname; %SMIL.body.attrib;
        %Core.attrib;
        %I18n.attrib;
>
<!-- end of SMIL-struct.mod -->











 

A.1.8 A.1.8 The SMIL Timing Module

<!-- ================================================================= -->
<!-- SMIL Timing and Synchronization Modules ========================= -->
<!-- file: SMIL-timing.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen.
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Timing//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-timing.mod"

     ================================================================= -->


<!-- ================== Timing Elements ============================== -->

<!ENTITY % SMIL.BasicTimeContainers.module "IGNORE">
<![%SMIL.BasicTimeContainers.module;[
  <!ENTITY % SMIL.par.content "EMPTY">
  <!ENTITY % SMIL.seq.content "EMPTY">
  <!ENTITY % SMIL.par.attrib  "">
  <!ENTITY % SMIL.seq.attrib  "">
  <!ENTITY % SMIL.seq.qname   "seq">
  <!ENTITY % SMIL.par.qname   "par">

  <!ELEMENT %SMIL.seq.qname; %SMIL.seq.content;>
  <!ATTLIST %SMIL.seq.qname; %SMIL.seq.attrib;
   %Core.attrib;
   %I18n.attrib;
   %SMIL.Description.attrib;
  >

  <!ELEMENT %SMIL.par.qname; %SMIL.par.content;>
  <!ATTLIST %SMIL.par.qname; %SMIL.par.attrib;
   %Core.attrib;
   %I18n.attrib;
   %SMIL.Description.attrib;
  >
]]>  <!-- End of BasicTimeContainers.module -->


<!ENTITY % SMIL.BasicExclTimeContainers.module "IGNORE">
<![%SMIL.BasicExclTimeContainers.module;[
  <!ENTITY % SMIL.excl.content          "EMPTY">
  <!ENTITY % SMIL.excl.attrib           "">
  <!ENTITY % SMIL.excl.qname            "excl">

  <!ELEMENT %SMIL.excl.qname; %SMIL.excl.content;>
  <!ATTLIST %SMIL.excl.qname; %SMIL.excl.attrib;
   %Core.attrib;
   %I18n.attrib;
   %SMIL.Description.attrib;
  >
]]>  <!-- End of BasicExclTimeContainers.module -->

<!ENTITY % SMIL.BasicPriorityClassContainers.module "IGNORE">
<![%SMIL.BasicPriorityClassContainers.module;[
  <!ENTITY % SMIL.priorityClass.content "EMPTY">
  <!ENTITY % SMIL.priorityClass.attrib  "">
  <!ENTITY % SMIL.priorityClass.qname   "priorityClass">

  <!ELEMENT %SMIL.priorityClass.qname; %SMIL.priorityClass.content;>
  <!ATTLIST %SMIL.priorityClass.qname; %SMIL.priorityClass.attrib;
    peers       (stop|pause|defer|never) "stop"
    higher      (stop|pause)             "pause" 
    lower       (defer|never)            "defer"
    pauseDisplay (disable|hide|show )    "show"
    %SMIL.Description.attrib;
    %Core.attrib;
    %I18n.attrib;
  >
]]>  <!-- End of BasicPriorityClassContainers.module -->

<!-- end of SMIL-timing.mod -->











 
 

A.1.9 A.1.9 The SMIL Transition Module

<!-- ====================================================================== -->
<!-- SMIL Transition Module  ============================================== -->
<!-- file: SMIL-transition.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen.
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Transition//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-transition.mod"

     ====================================================================== -->

<!ENTITY % SMIL.TransitionModifiers.module "IGNORE">
<![%SMIL.TransitionModifiers.module;[
 <!ENTITY % SMIL.transition-modifiers-attrs '
    horzRepeat   CDATA                  "1"
    vertRepeat   CDATA                  "1"
    borderWidth  CDATA                  "0"
    borderColor  CDATA                  "black"
 '>
]]> <!-- End of TransitionModifiers.module -->
<!ENTITY % SMIL.transition-modifiers-attrs "">

<!ENTITY % SMIL.BasicTransitions.module "INCLUDE">
<![%SMIL.BasicTransitions.module;[

 <!ENTITY % SMIL.transition-types "(barWipe|boxWipe|fourBoxWipe|barnDoorWipe|
  diagonalWipe|bowTieWipe|miscDiagonalWipe|veeWipe|barnVeeWipe|zigZagWipe|
  barnZigZagWipe|irisWipe|triangleWipe|arrowHeadWipe|pentagonWipe|
  hexagonWipe|ellipseWipe|eyeWipe|roundRectWipe|starWipe|miscShapeWipe|clockWipe|
  pinWheelWipe|singleSweepWipe|fanWipe|doubleFanWipe|doubleSweepWipe|
  saloonDoorWipe|windshieldWipe|snakeWipe|spiralWipe|parallelSnakesWipe|
  boxSnakesWipe|waterfallWipe|pushWipe|slideWipe|fade|audioFade|audioVisualFade)"
 >

 <!ENTITY % SMIL.transition-subtypes "(bottom
  |bottomCenter|bottomLeft|bottomLeftClockwise|bottomLeftCounterClockwise|
  bottomLeftDiagonal|bottomRight|bottomRightClockwise|
  bottomRightCounterClockwise|bottomRightDiagonal|centerRight|centerTop|
  circle|clockwiseBottom|clockwiseBottomRight|clockwiseLeft|clockwiseNine|
  clockwiseRight|clockwiseSix|clockwiseThree|clockwiseTop|clockwiseTopLeft|
  clockwiseTwelve|cornersIn|cornersOut|counterClockwiseBottomLeft|
  counterClockwiseTopRight|crossfade|diagonalBottomLeft|
  diagonalBottomLeftOpposite|diagonalTopLeft|diagonalTopLeftOpposite|
  diamond|doubleBarnDoor|doubleDiamond|down|fadeFromColor|fadeToColor|
  fanInHorizontal|fanInVertical|fanOutHorizontal|fanOutVertical|fivePoint|
  fourBlade|fourBoxHorizontal|fourBoxVertical|fourPoint|fromBottom|fromLeft|
  fromRight|fromTop|heart|horizontal|horizontalLeft|horizontalLeftSame|
  horizontalRight|horizontalRightSame|horizontalTopLeftOpposite|
  horizontalTopRightOpposite|keyhole|left|leftCenter|leftToRight|
  oppositeHorizontal|oppositeVertical|parallelDiagonal|
  parallelDiagonalBottomLeft|parallelDiagonalTopLeft|
  parallelVertical|rectangle|right|rightCenter|sixPoint|top|topCenter|
  topLeft|topLeftClockwise|topLeftCounterClockwise|topLeftDiagonal|
  topLeftHorizontal|topLeftVertical|topRight|topRightClockwise|
  topRightCounterClockwise|topRightDiagonal|topToBottom|twoBladeHorizontal|
  twoBladeVertical|twoBoxBottom|twoBoxLeft|twoBoxRight|twoBoxTop|up|
  vertical|verticalBottomLeftOpposite|verticalBottomSame|verticalLeft|
  verticalRight|verticalTopLeftOpposite|verticalTopSame)"
 >

 <!ENTITY  % SMIL.transition-attrs '
    type         %SMIL.transition-types;     #IMPLIED
    subtype      %SMIL.transition-subtypes;  #IMPLIED
    fadeColor    CDATA                  "black"
    %SMIL.transition-modifiers-attrs;
 '>

 <!ENTITY % SMIL.transition.attrib  "">
 <!ENTITY % SMIL.transition.content "EMPTY">
 <!ENTITY % SMIL.transition.qname   "transition">
 <!ELEMENT %SMIL.transition.qname; %SMIL.transition.content;>
 <!ATTLIST %SMIL.transition.qname; %SMIL.transition.attrib;
    %Core.attrib;
    %I18n.attrib;
    %SMIL.transition-attrs;
    dur           %TimeValue.datatype; #IMPLIED
    startProgress CDATA              "0.0"
    endProgress   CDATA              "1.0"
    direction     (forward|reverse)  "forward"
 >
]]> <!-- End of BasicTransitions.module -->

<!ENTITY % SMIL.InlineTransitions.module "IGNORE">
<![%SMIL.InlineTransitions.module;[

 <!ENTITY % SMIL.transitionFilter.attrib  "">
 <!ENTITY % SMIL.transitionFilter.content "EMPTY">
 <!ENTITY % SMIL.transitionFilter.qname   "transitionFilter">
 <!ELEMENT %SMIL.transitionFilter.qname; %SMIL.transitionFilter.content;>
 <!ATTLIST %SMIL.transitionFilter.qname; %SMIL.transitionFilter.attrib;
    %Core.attrib;
    %I18n.attrib;
    %SMIL.transition-attrs;
    %SMIL.BasicInlineTiming.attrib;
    %SMIL.BasicAnimation.attrib;
    calcMode   (discrete|linear|paced) 'linear'
 >
]]> <!-- End of InlineTransitions.module -->

<!-- ================== FullScreenTransitionEffects ====================== -->
<!ENTITY % SMIL.FullScreenTransitionEffects.module "IGNORE">
<![%SMIL.FullScreenTransitionEffects.module;[
  <!-- ================== FullScreenTransitionEffects Entities =========== -->
  <!ENTITY % SMIL.scope-attrs "
    scope (region|screen) 'region'
">

  <!-- ================ Add attributes to region element ================= -->
  <!ATTLIST %SMIL.transition.qname; %SMIL.scope-attrs;>
]]> <!-- end FullScreenTransitionEffects.module -->

<!-- end of SMIL-transition.mod -->











 

A.2 A.2 SMIL 2.1 Profiles:

A.2.1 A.2.1 SMIL 2.1 Language Profile model

                                                      
<!-- ====================================================================== -->
<!-- SMIL 2.1 Document Model Module ======================================= -->
<!-- file: smil-model-1.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author: Warner ten Kate, Jacco van Ossenbruggen, Aaron Cohen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        1.1.2.4
        2005/06/23 09:07:46

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/smil-language-profile-model-1.mod"

     ====================================================================== -->

<!--
        This file defines the SMIL 2.1 Language Document Model.
        All attributes and content models are defined in the second
        half of this file.  We first start with some utility definitions.
        These are mainly used to simplify the use of Modules in the
        second part of the file.

-->

<!-- ================== Util: Head ======================================== -->
<!ENTITY % SMIL.head-meta.content       "%SMIL.metadata.qname;">
<!ENTITY % SMIL.head-layout.content     "%SMIL.layout.qname; 
                                       | %SMIL.switch.qname;">
<!ENTITY % SMIL.head-control.content    "%SMIL.customAttributes.qname;">
<!ENTITY % SMIL.head-transition.content "%SMIL.transition.qname;+">
<!ENTITY % SMIL.head-media.content      "%SMIL.paramGroup.qname;+">

<!--=================== Util: Body - Content Control ====================== -->
<!ENTITY % SMIL.content-control "%SMIL.switch.qname; | %SMIL.prefetch.qname;">
<!ENTITY % SMIL.content-control-attrs "%SMIL.Test.attrib; 
                                       %SMIL.customTestAttr.attrib; 
                                       %SMIL.skip-content.attrib;">

<!--=================== Util: Body - Animation ========================= -->
<!ENTITY % SMIL.animation.elements "%SMIL.animate.qname; 
                                    | %SMIL.set.qname; 
                                    | %SMIL.animateMotion.qname; 
                                    | %SMIL.animateColor.qname;">

<!--=================== Util: Body - Media ========================= -->

<!ENTITY % SMIL.media-object "%SMIL.audio.qname; 
                              | %SMIL.video.qname; 
                              | %SMIL.animation.qname;
                              | %SMIL.text.qname;
                              | %SMIL.img.qname;
                              | %SMIL.textstream.qname;
                              | %SMIL.ref.qname;
                              | %SMIL.brush.qname;
                              | %SMIL.animation.elements;">

<!--=================== Util: Body - Timing =============================== -->
<!ENTITY % SMIL.BasicTimeContainers.class "%SMIL.par.qname; 
                                         | %SMIL.seq.qname;">

<!ENTITY % SMIL.ExclTimeContainers.class "%SMIL.excl.qname;">

<!ENTITY % SMIL.timecontainer.class   "%SMIL.BasicTimeContainers.class;
                                       |%SMIL.ExclTimeContainers.class;">

<!ENTITY % SMIL.timecontainer.content "%SMIL.timecontainer.class; 
                                     | %SMIL.media-object;
                                     | %SMIL.content-control;
                                     | %SMIL.a.qname;">

<!ENTITY % SMIL.smil-basictime.attrib "
 %SMIL.BasicInlineTiming.attrib;
 %SMIL.BasicInlineTiming-deprecated.attrib;
 %SMIL.MinMaxTiming.attrib;
">

<!ENTITY % SMIL.timecontainer.attrib "
 %SMIL.BasicInlineTiming.attrib;
 %SMIL.BasicInlineTiming-deprecated.attrib;
 %SMIL.MinMaxTiming.attrib;
 %SMIL.RestartTiming.attrib;
 %SMIL.RestartDefaultTiming.attrib;
 %SMIL.SyncBehavior.attrib;
 %SMIL.SyncBehaviorDefault.attrib;
 %SMIL.fillDefault.attrib;
">

<!-- ====================================================================== -->
<!-- ====================================================================== -->
<!-- ====================================================================== -->

<!-- 
     The actual content model and attribute definitions for each module 
     sections follow below.
-->

<!-- ================== Content Control =================================== -->
<!ENTITY % SMIL.BasicContentControl.module  "INCLUDE">
<!ENTITY % SMIL.CustomTestAttributes.module "INCLUDE">
<!ENTITY % SMIL.PrefetchControl.module      "INCLUDE">
<!ENTITY % SMIL.skip-contentControl.module   "INCLUDE">

<!ENTITY % SMIL.switch.content "((%SMIL.timecontainer.class;
                                | %SMIL.media-object;
                                | %SMIL.content-control;
                                | %SMIL.a.qname; 
                                | %SMIL.area.qname; 
                                | %SMIL.anchor.qname;)*
                                | %SMIL.layout.qname;*)">

<!ENTITY % SMIL.switch.attrib "%SMIL.Test.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.prefetch.attrib "
 %SMIL.timecontainer.attrib; 
 %SMIL.MediaClip.attrib; 
 %SMIL.MediaClip.attrib.deprecated; 
 %SMIL.Test.attrib; 
 %SMIL.customTestAttr.attrib; 
 %SMIL.skip-content.attrib; 
">

<!ENTITY % SMIL.customAttributes.attrib  "%SMIL.Test.attrib; %SMIL.skip-content.attrib;">
<!ENTITY % SMIL.customTest.attrib    "%SMIL.skip-content.attrib;">

<!-- ================== Animation ========================================= -->
<!ENTITY % SMIL.BasicAnimation.module "INCLUDE">

<!-- choose targetElement or XLink: -->
<!ENTITY % SMIL.animation-targetElement "INCLUDE">
<!ENTITY % SMIL.animation-XLinkTarget   "IGNORE">

<!ENTITY % SMIL.animate.content "EMPTY">
<!ENTITY % SMIL.animateColor.content "EMPTY">
<!ENTITY % SMIL.animateMotion.content "EMPTY">
<!ENTITY % SMIL.set.content "EMPTY">

<!ENTITY % SMIL.animate.attrib        "%SMIL.skip-content.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.animateColor.attrib   "%SMIL.skip-content.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.animateMotion.attrib  "%SMIL.skip-content.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.set.attrib            "%SMIL.skip-content.attrib; %SMIL.customTestAttr.attrib;">

<!-- ================== Layout ============================================ -->
<!ENTITY % SMIL.BasicLayout.module            "INCLUDE">
<!ENTITY % SMIL.AudioLayout.module            "INCLUDE">
<!ENTITY % SMIL.MultiWindowLayout.module      "INCLUDE">
<!ENTITY % SMIL.SubRegionLayout.module        "INCLUDE">
<!ENTITY % SMIL.AlignmentLayout.module        "INCLUDE">
<!ENTITY % SMIL.OverrideLayout.module         "INCLUDE">
<!ENTITY % SMIL.BackgroundTilingLayout.module "INCLUDE">

<!ENTITY % SMIL.layout.content "(%SMIL.region.qname;
                               | %SMIL.topLayout.qname;
                               | %SMIL.root-layout.qname; 
                               | %SMIL.regPoint.qname;)*">
<!ENTITY % SMIL.region.content "(%SMIL.region.qname;)*">
<!ENTITY % SMIL.topLayout.content "(%SMIL.region.qname;)*">
<!ENTITY % SMIL.rootlayout.content "EMPTY">
<!ENTITY % SMIL.regPoint.content "EMPTY">

<!ENTITY % SMIL.layout.attrib          "%SMIL.Test.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.rootlayout.attrib      "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.topLayout.attrib       "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.region.attrib          "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.regPoint.attrib        "%SMIL.content-control-attrs;">

<!-- ================== Linking =========================================== -->
<!ENTITY % SMIL.LinkingAttributes.module "INCLUDE">
<!ENTITY % SMIL.BasicLinking.module      "INCLUDE">
<!ENTITY % SMIL.ObjectLinking.module   "INCLUDE">

<!ENTITY % SMIL.a.content      "(%SMIL.timecontainer.class;|%SMIL.media-object;|
                                 %SMIL.content-control;)*">
<!ENTITY % SMIL.area.content   "(%SMIL.animate.qname;| %SMIL.set.qname;)*">
<!ENTITY % SMIL.anchor.content "(%SMIL.animate.qname; | %SMIL.set.qname;)*">

<!ENTITY % SMIL.a.attrib      "%SMIL.smil-basictime.attrib; %SMIL.Test.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.area.attrib   "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;"> 
<!ENTITY % SMIL.anchor.attrib "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;"> 

<!-- ================== Media  ============================================ -->
<!ENTITY % SMIL.BasicMedia.module                     "INCLUDE">
<!ENTITY % SMIL.MediaClipping.module                  "INCLUDE">
<!ENTITY % SMIL.MediaClipping.deprecated.module       "INCLUDE">
<!ENTITY % SMIL.MediaClipMarkers.module               "INCLUDE">
<!ENTITY % SMIL.MediaParam.module                     "INCLUDE">
<!ENTITY % SMIL.BrushMedia.module                     "INCLUDE">
<!ENTITY % SMIL.MediaAccessibility.module             "INCLUDE">

<!ENTITY % SMIL.media-object.content "(%SMIL.animation.elements;
                                     | %SMIL.switch.qname;
                                     | %SMIL.anchor.qname;
                                     | %SMIL.area.qname;
                                     | %SMIL.param.qname;)*">
<!ENTITY % SMIL.media-object.attrib "
  %SMIL.BasicInlineTiming.attrib;
  %SMIL.BasicInlineTiming-deprecated.attrib;
  %SMIL.MinMaxTiming.attrib;
  %SMIL.RestartTiming.attrib;
  %SMIL.RestartDefaultTiming.attrib;
  %SMIL.SyncBehavior.attrib;
  %SMIL.SyncBehaviorDefault.attrib;
  %SMIL.endsync.media.attrib;
  %SMIL.fill.attrib;
  %SMIL.fillDefault.attrib;
  %SMIL.Test.attrib;
  %SMIL.customTestAttr.attrib;
  %SMIL.regionAttr.attrib;
  %SMIL.Transition.attrib;
  %SMIL.backgroundColor.attrib;
  %SMIL.backgroundColor-deprecated.attrib;
  %SMIL.Sub-region.attrib;
  %SMIL.RegistrationPoint.attrib;
  %SMIL.fit.attrib;
  %SMIL.tabindex.attrib;
  %SMIL.MediaObject.attrib;
">

<!ENTITY % SMIL.brush.attrib        "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.param.attrib        "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.paramGroup.attrib   "%SMIL.skip-content.attrib;">

<!-- ================== Metadata ========================================== -->
<!ENTITY % SMIL.meta.content     "EMPTY">
<!ENTITY % SMIL.meta.attrib      "%SMIL.skip-content.attrib;">

<!ENTITY % SMIL.metadata.content "EMPTY">
<!ENTITY % SMIL.metadata.attrib  "%SMIL.skip-content.attrib;">

<!-- ================== Structure ========================================= -->
<!ENTITY % SMIL.Structure.module "INCLUDE">
<!ENTITY % SMIL.smil.content "(%SMIL.head.qname;?,%SMIL.body.qname;?)">
<!ENTITY % SMIL.head.content "(
         %SMIL.meta.qname;*,
         ((%SMIL.head-control.content;),   %SMIL.meta.qname;*)?,
         ((%SMIL.head-meta.content;),      %SMIL.meta.qname;*)?,
         ((%SMIL.head-layout.content;),    %SMIL.meta.qname;*)?,
         ((%SMIL.head-transition.content;),%SMIL.meta.qname;*)?,
         ((%SMIL.head-media.content;),     %SMIL.meta.qname;*)?
)">
<!ENTITY % SMIL.body.content "(%SMIL.timecontainer.class;|%SMIL.media-object;|
                          %SMIL.content-control;|a)*">

<!ENTITY % SMIL.smil.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.body.attrib "
        %SMIL.timecontainer.attrib; 
        %SMIL.Description.attrib;
        %SMIL.fill.attrib;
">

<!-- ================== Transitions ======================================= -->
<!ENTITY % SMIL.BasicTransitions.module            "INCLUDE">
<!ENTITY % SMIL.TransitionModifiers.module         "INCLUDE">
<!ENTITY % SMIL.InlineTransitions.module           "IGNORE">
<!ENTITY % SMIL.FullScreenTransitionEffects.module "INCLUDE">

<!ENTITY % SMIL.transition.content "EMPTY">
<!ENTITY % SMIL.transition.attrib "%SMIL.content-control-attrs;">

<!-- ================== Timing ============================================ -->
<!ENTITY % SMIL.BasicInlineTiming.module            "INCLUDE">
<!ENTITY % SMIL.SyncbaseTiming.module               "INCLUDE">
<!ENTITY % SMIL.EventTiming.module                  "INCLUDE">
<!ENTITY % SMIL.WallclockTiming.module              "INCLUDE">
<!ENTITY % SMIL.MultiArcTiming.module               "INCLUDE">
<!ENTITY % SMIL.MediaMarkerTiming.module            "INCLUDE">
<!ENTITY % SMIL.MinMaxTiming.module                 "INCLUDE">
<!ENTITY % SMIL.BasicTimeContainers.module          "INCLUDE">
<!ENTITY % SMIL.BasicExclTimeContainers.module      "INCLUDE">
<!ENTITY % SMIL.BasicPriorityClassContainers.module "INCLUDE">
<!ENTITY % SMIL.PrevTiming.module                   "INCLUDE">
<!ENTITY % SMIL.RestartTiming.module                "INCLUDE">
<!ENTITY % SMIL.SyncBehavior.module                 "INCLUDE">
<!ENTITY % SMIL.SyncBehaviorDefault.module          "INCLUDE">
<!ENTITY % SMIL.RestartDefault.module               "INCLUDE">
<!ENTITY % SMIL.fillDefault.module                  "INCLUDE">

<!ENTITY % SMIL.par.attrib "
        %SMIL.endsync.attrib; 
        %SMIL.fill.attrib;
        %SMIL.timecontainer.attrib; 
        %SMIL.Test.attrib; 
        %SMIL.customTestAttr.attrib; 
        %SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.seq.attrib "
        %SMIL.fill.attrib;
        %SMIL.timecontainer.attrib; 
        %SMIL.Test.attrib; 
        %SMIL.customTestAttr.attrib; 
        %SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.excl.attrib "
        %SMIL.endsync.attrib; 
        %SMIL.fill.attrib;
        %SMIL.timecontainer.attrib; 
        %SMIL.Test.attrib; 
        %SMIL.customTestAttr.attrib; 
        %SMIL.regionAttr.attrib; 
        %SMIL.skip-content.attrib;
">
<!ENTITY % SMIL.par.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.seq.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.excl.content "((%SMIL.timecontainer.content;)*
                              | %SMIL.priorityClass.qname;+)">

<!ENTITY % SMIL.priorityClass.attrib  "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.priorityClass.content "(%SMIL.timecontainer.content;)*">

<!-- end of smil-language-profile-model-1.mod -->

A.2.2 A.2.2 SMIL 2.1 Mobile Profile model

                                                      
<!-- ====================================================================== -->
<!-- SMIL 2.1 Document Model Module ======================================= -->
<!-- file: smil-model-extended-mobile-1.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author: Warner ten Kate, Jacco van Ossenbruggen, Aaron Cohen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        1.1.2.5
        2005/06/23 09:07:46

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/smil-mobile-profile-model-1.mod"

     ====================================================================== -->

<!--
        This file defines the SMIL 2.1 Mobile Profile
        Document Model.  All attributes and content models are defined
        in the second half of this file.  We first start with some
        utility definitions.  These are mainly used to simplify the
        use of Modules in the second part of the file.

-->

<!-- ================== Util: Head ======================================== -->
<!ENTITY % SMIL.head-meta.content       "%SMIL.metadata.qname;">
<!ENTITY % SMIL.head-layout.content     "%SMIL.layout.qname; 
                                       | %SMIL.switch.qname;">
<!ENTITY % SMIL.head-transition.content "%SMIL.transition.qname;+">
<!ENTITY % SMIL.head-media.content      "%SMIL.paramGroup.qname;+">

<!--=================== Util: Body - Content Control ====================== -->
<!ENTITY % SMIL.content-control "%SMIL.switch.qname; | %SMIL.prefetch.qname;">
<!ENTITY % SMIL.content-control-attrs "%SMIL.Test.attrib; 
                                       %SMIL.skip-content.attrib;">

<!--=================== Util: Body - Media ========================= -->

<!ENTITY % SMIL.media-object "%SMIL.audio.qname; 
                              | %SMIL.video.qname; 
                              | %SMIL.animation.qname;
                              | %SMIL.text.qname;
                              | %SMIL.img.qname;
                              | %SMIL.textstream.qname;
                              | %SMIL.ref.qname;">

<!--=================== Util: Body - Timing =============================== -->
<!ENTITY % SMIL.BasicTimeContainers.class "%SMIL.par.qname; 
                                         | %SMIL.seq.qname;">

<!ENTITY % SMIL.timecontainer.class   "%SMIL.BasicTimeContainers.class;">

<!ENTITY % SMIL.timecontainer.content "%SMIL.timecontainer.class; 
                                     | %SMIL.media-object;
                                     | %SMIL.content-control;
                                     | %SMIL.a.qname;">

<!ENTITY % SMIL.smil-basictime.attrib "
 %SMIL.BasicInlineTiming.attrib;
 %SMIL.BasicInlineTiming-deprecated.attrib;
 %SMIL.MinMaxTiming.attrib;
">

<!ENTITY % SMIL.timecontainer.attrib "
 %SMIL.BasicInlineTiming.attrib;
 %SMIL.BasicInlineTiming-deprecated.attrib;
 %SMIL.MinMaxTiming.attrib;
">

<!-- ====================================================================== -->
<!-- ====================================================================== -->
<!-- ====================================================================== -->

<!-- 
     The actual content model and attribute definitions for each module 
     sections follow below.
-->

<!-- ================== Content Control =================================== -->
<!ENTITY % SMIL.BasicContentControl.module  "INCLUDE">
<!ENTITY % SMIL.CustomTestAttributes.module "IGNORE">
<!ENTITY % SMIL.PrefetchControl.module      "INCLUDE">
<!ENTITY % SMIL.skip-contentControl.module  "INCLUDE">

<!ENTITY % SMIL.switch.content "((%SMIL.timecontainer.class;
                                | %SMIL.media-object;
                                | %SMIL.content-control;
                                | %SMIL.a.qname; 
                                | %SMIL.area.qname; 
                                | %SMIL.anchor.qname;)*
                                | %SMIL.layout.qname;*)">

<!ENTITY % SMIL.switch.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.prefetch.attrib "
 %SMIL.timecontainer.attrib; 
 %SMIL.MediaClip.attrib; 
 %SMIL.MediaClip.attrib.deprecated; 
 %SMIL.Test.attrib; 
 %SMIL.skip-content.attrib; 
">

<!-- ================== Layout ============================================ -->
<!ENTITY % SMIL.BasicLayout.module            "INCLUDE">
<!ENTITY % SMIL.AudioLayout.module            "INCLUDE">
<!ENTITY % SMIL.MultiWindowLayout.module      "IGNORE">
<!ENTITY % SMIL.SubRegionLayout.module        "IGNORE">
<!ENTITY % SMIL.AlignmentLayout.module        "INCLUDE">
<!ENTITY % SMIL.OverrideLayout.module         "IGNORE">
<!ENTITY % SMIL.BackgroundTilingLayout.module "INCLUDE">

<!ENTITY % SMIL.layout.content "(%SMIL.region.qname;
                               | %SMIL.root-layout.qname; 
                               | %SMIL.regPoint.qname;)*">
<!ENTITY % SMIL.region.content "(%SMIL.region.qname;)*">
<!ENTITY % SMIL.rootlayout.content "EMPTY">
<!ENTITY % SMIL.regPoint.content "EMPTY">

<!ENTITY % SMIL.layout.attrib          "%SMIL.Test.attrib;">
<!ENTITY % SMIL.rootlayout.attrib      "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.region.attrib          "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.regPoint.attrib        "%SMIL.content-control-attrs;">

<!-- ================== Linking =========================================== -->
<!ENTITY % SMIL.LinkingAttributes.module "INCLUDE">
<!ENTITY % SMIL.BasicLinking.module      "INCLUDE">
<!ENTITY % SMIL.ObjectLinking.module     "IGNORE">

<!ENTITY % SMIL.a.content      "(%SMIL.timecontainer.class;|%SMIL.media-object;|
                                 %SMIL.content-control;)*">
<!ENTITY % SMIL.area.content   "EMPTY">
<!ENTITY % SMIL.anchor.content "EMPTY">

<!ENTITY % SMIL.a.attrib      "%SMIL.smil-basictime.attrib; %SMIL.Test.attrib;">
<!ENTITY % SMIL.area.attrib   "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;"> 
<!ENTITY % SMIL.anchor.attrib "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;"> 

<!-- ================== Media  ============================================ -->
<!ENTITY % SMIL.BasicMedia.module                     "INCLUDE">
<!ENTITY % SMIL.MediaClipping.module                  "INCLUDE">
<!ENTITY % SMIL.MediaClipping.deprecated.module       "INCLUDE">
<!ENTITY % SMIL.MediaClipMarkers.module               "IGNORE">
<!ENTITY % SMIL.MediaParam.module                     "INCLUDE">
<!ENTITY % SMIL.BrushMedia.module                     "IGNORE">
<!ENTITY % SMIL.MediaAccessibility.module             "INCLUDE">

<!ENTITY % SMIL.media-object.content "(%SMIL.switch.qname;
                                     | %SMIL.anchor.qname;
                                     | %SMIL.area.qname;
                                     | %SMIL.param.qname;)*">
<!ENTITY % SMIL.media-object.attrib "
  %SMIL.BasicInlineTiming.attrib;
  %SMIL.BasicInlineTiming-deprecated.attrib;
  %SMIL.MinMaxTiming.attrib;
  %SMIL.endsync.media.attrib;
  %SMIL.fill.attrib;
  %SMIL.Test.attrib;
  %SMIL.regionAttr.attrib;
  %SMIL.Transition.attrib;
  %SMIL.backgroundColor.attrib;
  %SMIL.backgroundColor-deprecated.attrib;
  %SMIL.RegistrationPoint.attrib;
  %SMIL.fit.attrib;
  %SMIL.tabindex.attrib;
  %SMIL.MediaObject.attrib;
">

<!ENTITY % SMIL.param.attrib        "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.paramGroup.attrib   "%SMIL.skip-content.attrib;">

<!-- ================== Metadata ========================================== -->
<!ENTITY % SMIL.meta.content     "EMPTY">
<!ENTITY % SMIL.meta.attrib      "%SMIL.skip-content.attrib;">

<!ENTITY % SMIL.metadata.content "EMPTY">
<!ENTITY % SMIL.metadata.attrib  "%SMIL.skip-content.attrib;">

<!-- ================== Structure ========================================= -->
<!ENTITY % SMIL.Structure.module "INCLUDE">
<!ENTITY % SMIL.smil.content "(%SMIL.head.qname;?,%SMIL.body.qname;?)">
<!ENTITY % SMIL.head.content "(
         %SMIL.meta.qname;*,
         ((%SMIL.head-meta.content;),      %SMIL.meta.qname;*)?,
         ((%SMIL.head-layout.content;),    %SMIL.meta.qname;*)?,
         ((%SMIL.head-transition.content;),%SMIL.meta.qname;*)?,
         ((%SMIL.head-media.content;),     %SMIL.meta.qname;*)?
)">
<!ENTITY % SMIL.body.content "(%SMIL.timecontainer.class;|%SMIL.media-object;|
                          %SMIL.content-control;|a)*">

<!ENTITY % SMIL.smil.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.body.attrib "
        %SMIL.timecontainer.attrib; 
        %SMIL.Description.attrib;
        %SMIL.fill.attrib;
">

<!-- ================== Transitions ======================================= -->
<!ENTITY % SMIL.BasicTransitions.module            "INCLUDE">
<!ENTITY % SMIL.TransitionModifiers.module         "IGNORE">
<!ENTITY % SMIL.InlineTransitions.module           "IGNORE">
<!ENTITY % SMIL.FullScreenTransitionEffects.module "INCLUDE">

<!ENTITY % SMIL.transition.content "EMPTY">
<!ENTITY % SMIL.transition.attrib "%SMIL.content-control-attrs;">

<!-- ================== Timing ============================================ -->
<!ENTITY % SMIL.BasicInlineTiming.module            "INCLUDE">
<!ENTITY % SMIL.SyncbaseTiming.module               "IGNORE">
<!ENTITY % SMIL.EventTiming.module                  "INCLUDE">
<!ENTITY % SMIL.WallclockTiming.module              "IGNORE">
<!ENTITY % SMIL.MultiArcTiming.module               "IGNORE">
<!ENTITY % SMIL.MediaMarkerTiming.module            "IGNORE">
<!ENTITY % SMIL.MinMaxTiming.module                 "INCLUDE">
<!ENTITY % SMIL.BasicTimeContainers.module          "INCLUDE">
<!ENTITY % SMIL.BasicExclTimeContainers.module      "IGNORE">
<!ENTITY % SMIL.BasicPriorityClassContainers.module "IGNORE">
<!ENTITY % SMIL.PrevTiming.module                   "INCLUDE">
<!ENTITY % SMIL.RestartTiming.module                "IGNORE">
<!ENTITY % SMIL.SyncBehavior.module                 "IGNORE">
<!ENTITY % SMIL.SyncBehaviorDefault.module          "IGNORE">
<!ENTITY % SMIL.RestartDefault.module               "IGNORE">
<!ENTITY % SMIL.fillDefault.module                  "IGNORE">

<!ENTITY % SMIL.par.attrib "
        %SMIL.endsync.attrib; 
        %SMIL.fill.attrib;
        %SMIL.timecontainer.attrib; 
        %SMIL.Test.attrib; 
        %SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.seq.attrib "
        %SMIL.fill.attrib;
        %SMIL.timecontainer.attrib; 
        %SMIL.Test.attrib; 
        %SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.par.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.seq.content "(%SMIL.timecontainer.content;)*">

<!-- end of smil-mobile-profile-model-1.mod -->

A.2.3 A.2.3 SMIL 2.1 Extended Mobile Profile model

                                                      
<!-- ====================================================================== -->
<!-- SMIL 2.1 Document Model Module ======================================= -->
<!-- file: smil-model-extended-mobile-1.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author: Warner ten Kate, Jacco van Ossenbruggen, Aaron Cohen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        1.1.2.4
        2005/06/23 09:07:46

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/smil-extended-mobile-profile-model-1.mod"

     ====================================================================== -->

<!--
        This file defines the SMIL 2.1 Extended Mobile Profile
        Document Model.  All attributes and content models are defined
        in the second half of this file.  We first start with some
        utility definitions.  These are mainly used to simplify the
        use of Modules in the second part of the file.

-->

<!-- ================== Util: Head ======================================== -->
<!ENTITY % SMIL.head-meta.content       "%SMIL.metadata.qname;">
<!ENTITY % SMIL.head-layout.content     "%SMIL.layout.qname; 
                                       | %SMIL.switch.qname;">
<!ENTITY % SMIL.head-transition.content "%SMIL.transition.qname;+">
<!ENTITY % SMIL.head-media.content      "%SMIL.paramGroup.qname;+">

<!--=================== Util: Body - Content Control ====================== -->
<!ENTITY % SMIL.content-control "%SMIL.switch.qname; | %SMIL.prefetch.qname;">
<!ENTITY % SMIL.content-control-attrs "%SMIL.Test.attrib; 
                                       %SMIL.skip-content.attrib;">

<!--=================== Util: Body - Animation ========================= -->
<!ENTITY % SMIL.animation.elements "%SMIL.animate.qname; 
                                    | %SMIL.set.qname; 
                                    | %SMIL.animateMotion.qname; 
                                    | %SMIL.animateColor.qname;">

<!--=================== Util: Body - Media ========================= -->

<!ENTITY % SMIL.media-object "%SMIL.audio.qname; 
                              | %SMIL.video.qname; 
                              | %SMIL.animation.qname;
                              | %SMIL.text.qname;
                              | %SMIL.img.qname;
                              | %SMIL.textstream.qname;
                              | %SMIL.ref.qname;
                              | %SMIL.brush.qname;
                              | %SMIL.animation.elements;">

<!--=================== Util: Body - Timing =============================== -->
<!ENTITY % SMIL.BasicTimeContainers.class "%SMIL.par.qname; 
                                         | %SMIL.seq.qname;">

<!ENTITY % SMIL.ExclTimeContainers.class "%SMIL.excl.qname;">

<!ENTITY % SMIL.timecontainer.class   "%SMIL.BasicTimeContainers.class;
                                       |%SMIL.ExclTimeContainers.class;">

<!ENTITY % SMIL.timecontainer.content "%SMIL.timecontainer.class; 
                                     | %SMIL.media-object;
                                     | %SMIL.content-control;
                                     | %SMIL.a.qname;">

<!ENTITY % SMIL.smil-basictime.attrib "
 %SMIL.BasicInlineTiming.attrib;
 %SMIL.BasicInlineTiming-deprecated.attrib;
 %SMIL.MinMaxTiming.attrib;
">

<!ENTITY % SMIL.timecontainer.attrib "
 %SMIL.BasicInlineTiming.attrib;
 %SMIL.BasicInlineTiming-deprecated.attrib;
 %SMIL.MinMaxTiming.attrib;
">

<!-- ====================================================================== -->
<!-- ====================================================================== -->
<!-- ====================================================================== -->

<!-- 
     The actual content model and attribute definitions for each module 
     sections follow below.
-->

<!-- ================== Content Control =================================== -->
<!ENTITY % SMIL.BasicContentControl.module  "INCLUDE">
<!ENTITY % SMIL.CustomTestAttributes.module "IGNORE">
<!ENTITY % SMIL.PrefetchControl.module      "INCLUDE">
<!ENTITY % SMIL.skip-contentControl.module  "INCLUDE">

<!ENTITY % SMIL.switch.content "((%SMIL.timecontainer.class;
                                | %SMIL.media-object;
                                | %SMIL.content-control;
                                | %SMIL.a.qname; 
                                | %SMIL.area.qname; 
                                | %SMIL.anchor.qname;)*
                                | %SMIL.layout.qname;*)">

<!ENTITY % SMIL.switch.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.prefetch.attrib "
 %SMIL.timecontainer.attrib; 
 %SMIL.MediaClip.attrib; 
 %SMIL.MediaClip.attrib.deprecated; 
 %SMIL.Test.attrib; 
 %SMIL.skip-content.attrib; 
">

<!-- ================== Animation ========================================= -->
<!ENTITY % SMIL.BasicAnimation.module "INCLUDE">

<!-- choose targetElement or XLink: -->
<!ENTITY % SMIL.animation-targetElement "INCLUDE">
<!ENTITY % SMIL.animation-XLinkTarget   "IGNORE">

<!ENTITY % SMIL.animate.content "EMPTY">
<!ENTITY % SMIL.animateColor.content "EMPTY">
<!ENTITY % SMIL.animateMotion.content "EMPTY">
<!ENTITY % SMIL.set.content "EMPTY">

<!ENTITY % SMIL.animate.attrib        "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.animateColor.attrib   "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.animateMotion.attrib  "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.set.attrib            "%SMIL.skip-content.attrib;">

<!-- ================== Layout ============================================ -->
<!ENTITY % SMIL.BasicLayout.module            "INCLUDE">
<!ENTITY % SMIL.AudioLayout.module            "INCLUDE">
<!ENTITY % SMIL.MultiWindowLayout.module      "IGNORE">
<!ENTITY % SMIL.SubRegionLayout.module        "INCLUDE">
<!ENTITY % SMIL.AlignmentLayout.module        "INCLUDE">
<!ENTITY % SMIL.OverrideLayout.module         "INCLUDE">
<!ENTITY % SMIL.BackgroundTilingLayout.module "INCLUDE">

<!ENTITY % SMIL.layout.content "(%SMIL.region.qname;
                               | %SMIL.root-layout.qname; 
                               | %SMIL.regPoint.qname;)*">
<!ENTITY % SMIL.region.content "(%SMIL.region.qname;)*">
<!ENTITY % SMIL.rootlayout.content "EMPTY">
<!ENTITY % SMIL.regPoint.content "EMPTY">

<!ENTITY % SMIL.layout.attrib          "%SMIL.Test.attrib;">
<!ENTITY % SMIL.rootlayout.attrib      "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.region.attrib          "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.regPoint.attrib        "%SMIL.content-control-attrs;">

<!-- ================== Linking =========================================== -->
<!ENTITY % SMIL.LinkingAttributes.module "INCLUDE">
<!ENTITY % SMIL.BasicLinking.module      "INCLUDE">
<!ENTITY % SMIL.ObjectLinking.module     "IGNORE">

<!ENTITY % SMIL.a.content      "(%SMIL.timecontainer.class;|%SMIL.media-object;|
                                 %SMIL.content-control;)*">
<!ENTITY % SMIL.area.content   "(%SMIL.animate.qname;| %SMIL.set.qname;)*">
<!ENTITY % SMIL.anchor.content "(%SMIL.animate.qname; | %SMIL.set.qname;)*">

<!ENTITY % SMIL.a.attrib      "%SMIL.smil-basictime.attrib; %SMIL.Test.attrib;">
<!ENTITY % SMIL.area.attrib   "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;"> 
<!ENTITY % SMIL.anchor.attrib "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;"> 

<!-- ================== Media  ============================================ -->
<!ENTITY % SMIL.BasicMedia.module                     "INCLUDE">
<!ENTITY % SMIL.MediaClipping.module                  "INCLUDE">
<!ENTITY % SMIL.MediaClipping.deprecated.module       "INCLUDE">
<!ENTITY % SMIL.MediaClipMarkers.module               "IGNORE">
<!ENTITY % SMIL.MediaParam.module                     "INCLUDE">
<!ENTITY % SMIL.BrushMedia.module                     "INCLUDE">
<!ENTITY % SMIL.MediaAccessibility.module             "INCLUDE">

<!ENTITY % SMIL.media-object.content "(%SMIL.animation.elements;
                                     | %SMIL.switch.qname;
                                     | %SMIL.anchor.qname;
                                     | %SMIL.area.qname;
                                     | %SMIL.param.qname;)*">
<!ENTITY % SMIL.media-object.attrib "
  %SMIL.BasicInlineTiming.attrib;
  %SMIL.BasicInlineTiming-deprecated.attrib;
  %SMIL.MinMaxTiming.attrib;
  %SMIL.endsync.media.attrib;
  %SMIL.fill.attrib;
  %SMIL.Test.attrib;
  %SMIL.regionAttr.attrib;
  %SMIL.Transition.attrib;
  %SMIL.backgroundColor.attrib;
  %SMIL.backgroundColor-deprecated.attrib;
  %SMIL.Sub-region.attrib;
  %SMIL.RegistrationPoint.attrib;
  %SMIL.fit.attrib;
  %SMIL.tabindex.attrib;
  %SMIL.MediaObject.attrib;
">

<!ENTITY % SMIL.brush.attrib        "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.param.attrib        "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.paramGroup.attrib   "%SMIL.skip-content.attrib;">

<!-- ================== Metadata ========================================== -->
<!ENTITY % SMIL.meta.content     "EMPTY">
<!ENTITY % SMIL.meta.attrib      "%SMIL.skip-content.attrib;">

<!ENTITY % SMIL.metadata.content "EMPTY">
<!ENTITY % SMIL.metadata.attrib  "%SMIL.skip-content.attrib;">

<!-- ================== Structure ========================================= -->
<!ENTITY % SMIL.Structure.module "INCLUDE">
<!ENTITY % SMIL.smil.content "(%SMIL.head.qname;?,%SMIL.body.qname;?)">
<!ENTITY % SMIL.head.content "(
         %SMIL.meta.qname;*,
         ((%SMIL.head-meta.content;),      %SMIL.meta.qname;*)?,
         ((%SMIL.head-layout.content;),    %SMIL.meta.qname;*)?,
         ((%SMIL.head-transition.content;),%SMIL.meta.qname;*)?,
         ((%SMIL.head-media.content;),     %SMIL.meta.qname;*)?
)">
<!ENTITY % SMIL.body.content "(%SMIL.timecontainer.class;|%SMIL.media-object;|
                          %SMIL.content-control;|a)*">

<!ENTITY % SMIL.smil.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.body.attrib "
        %SMIL.timecontainer.attrib; 
        %SMIL.Description.attrib;
        %SMIL.fill.attrib;
">

<!-- ================== Transitions ======================================= -->
<!ENTITY % SMIL.BasicTransitions.module            "INCLUDE">
<!ENTITY % SMIL.TransitionModifiers.module         "IGNORE">
<!ENTITY % SMIL.InlineTransitions.module           "IGNORE">
<!ENTITY % SMIL.FullScreenTransitionEffects.module "INCLUDE">

<!ENTITY % SMIL.transition.content "EMPTY">
<!ENTITY % SMIL.transition.attrib "%SMIL.content-control-attrs;">

<!-- ================== Timing ============================================ -->
<!ENTITY % SMIL.BasicInlineTiming.module            "INCLUDE">
<!ENTITY % SMIL.SyncbaseTiming.module               "IGNORE">
<!ENTITY % SMIL.EventTiming.module                  "INCLUDE">
<!ENTITY % SMIL.WallclockTiming.module              "IGNORE">
<!ENTITY % SMIL.MultiArcTiming.module               "INCLUDE">
<!ENTITY % SMIL.MediaMarkerTiming.module            "IGNORE">
<!ENTITY % SMIL.MinMaxTiming.module                 "INCLUDE">
<!ENTITY % SMIL.BasicTimeContainers.module          "INCLUDE">
<!ENTITY % SMIL.BasicExclTimeContainers.module      "INCLUDE">
<!ENTITY % SMIL.BasicPriorityClassContainers.module "IGNORE">
<!ENTITY % SMIL.PrevTiming.module                   "INCLUDE">
<!ENTITY % SMIL.RestartTiming.module                "IGNORE">
<!ENTITY % SMIL.SyncBehavior.module                 "IGNORE">
<!ENTITY % SMIL.SyncBehaviorDefault.module          "IGNORE">
<!ENTITY % SMIL.RestartDefault.module               "IGNORE">
<!ENTITY % SMIL.fillDefault.module                  "IGNORE">

<!ENTITY % SMIL.par.attrib "
        %SMIL.endsync.attrib; 
        %SMIL.fill.attrib;
        %SMIL.timecontainer.attrib; 
        %SMIL.Test.attrib; 
        %SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.seq.attrib "
        %SMIL.fill.attrib;
        %SMIL.timecontainer.attrib; 
        %SMIL.Test.attrib; 
        %SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.excl.attrib "
        %SMIL.endsync.attrib; 
        %SMIL.fill.attrib;
        %SMIL.timecontainer.attrib; 
        %SMIL.Test.attrib; 
        %SMIL.regionAttr.attrib; 
        %SMIL.skip-content.attrib;
">
<!ENTITY % SMIL.par.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.seq.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.excl.content "(%SMIL.timecontainer.content;)*">

<!-- end of smil-extended-mobile-profile-model-1.mod -->

A.2.4 A.2.4 SMIL 2.1 Language Profile DTD driver

                                                      
<!-- ....................................................................... -->
<!-- SMIL 2.1 DTD  ......................................................... -->
<!-- file: SMIL21.dtd                                                         
-->
<!-- SMIL 2.1 DTD

        This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

 This is the driver file for the SMIL 2.1 DTD.

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//DTD SMIL 2.1//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL21.dtd"

-->

<!ENTITY % NS.prefixed "IGNORE" >
<!ENTITY % SMIL.prefix "" >

<!-- Define the Content Model -->
<!ENTITY % smil-model.mod
    PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
           "smil-language-profile-model-1.mod" >

<!-- Modular Framework Module  ................................... -->
<!ENTITY % smil-framework.module "INCLUDE" >
<![%smil-framework.module;[
<!ENTITY % smil-framework.mod
     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Modular Framework 1.0//EN"
            "smil-framework-1.mod" >
%smil-framework.mod;]]>

<!-- The SMIL 2.1 Language Profile includes the following sections:
             C. The SMIL Animation Module 
             D. The SMIL Content Control Module 
             G. The SMIL Layout Module 
             H. The SMIL Linking Module 
             I. The SMIL Media Object Module 
             J. The SMIL Metainformation Module 
             K. The SMIL Structure Module 
             L. The SMIL Timing and Synchronization Module 
             M. Integrating SMIL Timing into other XML-Based Languages 
             P. The SMIL Transition effects Module 
-->

<!ENTITY % SMIL.anim-mod   
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Animation//EN"  
  "SMIL-anim.mod">
<!ENTITY % SMIL.control-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Content Control//EN" 
  "SMIL-control.mod">
<!ENTITY % SMIL.layout-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Layout//EN"  
  "SMIL-layout.mod">
<!ENTITY % SMIL.link-mod   
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Linking//EN"  
  "SMIL-link.mod">
<!ENTITY % SMIL.media-mod  
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Media Objects//EN" 
  "SMIL-media.mod">
<!ENTITY % SMIL.meta-mod   
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Metainformation//EN" 
  "SMIL-metainformation.mod">
<!ENTITY % SMIL.struct-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Structure//EN" 
  "SMIL-struct.mod">
<!ENTITY % SMIL.timing-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Timing//EN" 
  "SMIL-timing.mod">
<!ENTITY % SMIL.transition-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Transition//EN"
  "SMIL-transition.mod">

%SMIL.struct-mod;
%SMIL.anim-mod;
%SMIL.control-mod;
%SMIL.meta-mod;
%SMIL.layout-mod;
%SMIL.link-mod;
%SMIL.media-mod;
%SMIL.timing-mod;
%SMIL.transition-mod;

<!-- end of SMIL21.dtd -->

A.2.5 A.2.5 SMIL 2.1 Mobile Profile DTD driver

                                                      
<!-- ...................................................................... -->
<!-- SMIL 2.1 Mobile Profile DTD  ......................................... -->
<!-- file: SMIL21Mobile.dtd                                                 -->
<!-- SMIL 2.1 Mobile Profile DTD

        This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

 This is the driver file for the SMIL 2.1 Mobile Profile DTD.

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//DTD SMIL 2.1 Mobile//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL21Mobile.dtd"

-->

<!ENTITY % NS.prefixed "IGNORE" >
<!ENTITY % SMIL.prefix "" >

<!-- Define the Content Model -->
<!ENTITY % smil-model.mod
    PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
           "smil-mobile-profile-model-1.mod" >

<!-- Modular Framework Module  ................................... -->
<!ENTITY % smil-framework.module "INCLUDE" >
<![%smil-framework.module;[
<!ENTITY % smil-framework.mod
     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Modular Framework 1.0//EN"
            "smil-framework-1.mod" >
%smil-framework.mod;]]>

<!-- The SMIL 2.1 Mobile Profile includes the following sections:
             D. The SMIL Content Control Module 
             G. The SMIL Layout Module 
             H. The SMIL Linking Module 
             I. The SMIL Media Object Module 
             J. The SMIL Metainformation Module 
             K. The SMIL Structure Module 
             L. The SMIL Timing and Synchronization Module 
             M. Integrating SMIL Timing into other XML-Based Languages 
             P. The SMIL Transition effects Module 
-->

<!ENTITY % SMIL.control-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Content Control//EN" 
  "SMIL-control.mod">
<!ENTITY % SMIL.layout-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Layout//EN"  
  "SMIL-layout.mod">
<!ENTITY % SMIL.link-mod   
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Linking//EN"  
  "SMIL-link.mod">
<!ENTITY % SMIL.media-mod  
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Media Objects//EN" 
  "SMIL-media.mod">
<!ENTITY % SMIL.meta-mod   
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Metainformation//EN" 
  "SMIL-metainformation.mod">
<!ENTITY % SMIL.struct-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Structure//EN" 
  "SMIL-struct.mod">
<!ENTITY % SMIL.timing-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Timing//EN" 
  "SMIL-timing.mod">
<!ENTITY % SMIL.transition-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Transition//EN"
  "SMIL-transition.mod">

%SMIL.struct-mod;
%SMIL.control-mod;
%SMIL.meta-mod;
%SMIL.layout-mod;
%SMIL.link-mod;
%SMIL.media-mod;
%SMIL.timing-mod;
%SMIL.transition-mod;

<!-- end of SMIL21Mobile.dtd -->

A.2.6 A.2.6 SMIL 2.1 Extended Mobile Profile DTD driver

                                                      
<!-- ...................................................................... -->
<!-- SMIL 2.1 Extended Mobile Profile DTD  ................................ -->
<!-- file: SMIL21ExtendedMobile.dtd                                         -->
<!-- SMIL 2.1 Extended Mobile Profile DTD

        This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

 This is the driver file for the SMIL 2.1 Extended Mobile Profile DTD.

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//DTD SMIL 2.1 Extended Mobile//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/SMIL21ExtendedMobile.dtd"

-->

<!ENTITY % NS.prefixed "IGNORE" >
<!ENTITY % SMIL.prefix "" >

<!-- Define the Content Model -->
<!ENTITY % smil-model.mod
    PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
           "smil-extended-mobile-profile-model-1.mod" >

<!-- Modular Framework Module  ................................... -->
<!ENTITY % smil-framework.module "INCLUDE" >
<![%smil-framework.module;[
<!ENTITY % smil-framework.mod
     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Modular Framework 1.0//EN"
            "smil-framework-1.mod" >
%smil-framework.mod;]]>

<!-- The SMIL 2.1 Extended Mobile Profile includes the following sections:
             C. The SMIL Animation Module 
             D. The SMIL Content Control Module 
             G. The SMIL Layout Module 
             H. The SMIL Linking Module 
             I. The SMIL Media Object Module 
             J. The SMIL Metainformation Module 
             K. The SMIL Structure Module 
             L. The SMIL Timing and Synchronization Module 
             M. Integrating SMIL Timing into other XML-Based Languages 
             P. The SMIL Transition effects Module 
-->

<!ENTITY % SMIL.anim-mod   
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Animation//EN"  
  "SMIL-anim.mod">
<!ENTITY % SMIL.control-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Content Control//EN" 
  "SMIL-control.mod">
<!ENTITY % SMIL.layout-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Layout//EN"  
  "SMIL-layout.mod">
<!ENTITY % SMIL.link-mod   
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Linking//EN"  
  "SMIL-link.mod">
<!ENTITY % SMIL.media-mod  
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Media Objects//EN" 
  "SMIL-media.mod">
<!ENTITY % SMIL.meta-mod   
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Metainformation//EN" 
  "SMIL-metainformation.mod">
<!ENTITY % SMIL.struct-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Structure//EN" 
  "SMIL-struct.mod">
<!ENTITY % SMIL.timing-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Timing//EN" 
  "SMIL-timing.mod">
<!ENTITY % SMIL.transition-mod 
  PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Transition//EN"
  "SMIL-transition.mod">

%SMIL.struct-mod;
%SMIL.anim-mod;
%SMIL.control-mod;
%SMIL.meta-mod;
%SMIL.layout-mod;
%SMIL.link-mod;
%SMIL.media-mod;
%SMIL.timing-mod;
%SMIL.transition-mod;

<!-- end of SMIL21ExtendedMobile.dtd -->

A.3 A.3 General modularization framework:

A.3.1 A.3.1 SMIL 2.1 common datatypes

<!-- ...................................................................... -->
<!-- SMIL 2.1 Datatypes Module  ........................................... -->
<!-- file: smil-datatypes-1.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Datatypes 1.0//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/smil-datatypes-1.mod"

     ....................................................................... -->

<!-- Datatypes

     defines containers for the following datatypes, many of
     these imported from other specifications and standards.
-->

<!ENTITY % Character.datatype "CDATA">
    <!-- a single character from [ISO10646] -->
<!ENTITY % ContentType.datatype "CDATA">
    <!-- media type, as per [RFC2045] -->
<!ENTITY % LanguageCode.datatype "CDATA">
    <!-- a language code, as per [RFC3066] -->
<!ENTITY % LanguageCodes.datatype "CDATA">
    <!-- comma-separated list of language codes, as per [RFC3066] -->
<!ENTITY % Number.datatype "CDATA">
    <!-- one or more digits -->
<!ENTITY % Script.datatype "CDATA">
    <!-- script expression -->
<!ENTITY % Text.datatype "CDATA">
    <!-- used for titles etc. -->
<!ENTITY % TimeValue.datatype "CDATA">
    <!-- a Number, possibly with its dimension, or a reserved 
         word like 'indefinite' -->
<!ENTITY % URI.datatype "CDATA" >
    <!-- used for URI references -->

<!-- end of smil-datatypes-1.mod -->











    

A.3.2 A.3.2 SMIL 2.1 common attributes

<!-- ...................................................................... -->
<!-- SMIL 2.1 Common Attributes Module  ................................... -->
<!-- file: smil-attribs-1.mod

      This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Common Attributes 1.0//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/smil-attribs-1.mod"

     ...................................................................... -->

<!-- Common Attributes

     This module declares the common attributes for the SMIL DTD Modules.
-->

<!ENTITY % SMIL.pfx "">

<!ENTITY % id.attrib
 "%SMIL.pfx;id           ID                       #IMPLIED"
>

<!ENTITY % class.attrib
 "%SMIL.pfx;class        CDATA                    #IMPLIED"
>

<!ENTITY % title.attrib
 "%SMIL.pfx;title        %Text.datatype;                   #IMPLIED"
>

<!ENTITY % longdesc.attrib
 "%SMIL.pfx;longdesc     %URI.datatype;                    #IMPLIED"
>

<!ENTITY % alt.attrib
 "%SMIL.pfx;alt          %Text.datatype;                   #IMPLIED"
>

<!ENTITY % SMIL.Accessibility.attrib "
 %longdesc.attrib;
 %alt.attrib;
">

<!ENTITY % Core.extra.attrib "" >
<!ENTITY % Core.attrib "
  xml:base %URI.datatype; #IMPLIED
  %id.attrib;
  %class.attrib;
  %title.attrib;
  %SMIL.Accessibility.attrib;
  %Core.extra.attrib;
">

<!ENTITY % I18n.extra.attrib "" >
<!ENTITY % I18n.attrib "
  xml:lang %LanguageCode.datatype; #IMPLIED
  %I18n.extra.attrib;"
>

<!ENTITY % SMIL.Description.attrib "
 %SMIL.pfx;abstract        %Text.datatype;   #IMPLIED
 %SMIL.pfx;author          %Text.datatype;   #IMPLIED
 %SMIL.pfx;copyright       %Text.datatype;   #IMPLIED
">

<!ENTITY % SMIL.tabindex.attrib "
 %SMIL.pfx;tabindex        %Number.datatype;   #IMPLIED
">

<!-- ================== BasicLayout ======================================= -->
<!ENTITY % SMIL.regionAttr.attrib "
 %SMIL.pfx;region         CDATA #IMPLIED
">

<!-- ================== OverrideLayout ==================================== -->
<!ENTITY % SMIL.backgroundColor.attrib "
 %SMIL.pfx;backgroundColor     CDATA    #IMPLIED
">
<!ENTITY % SMIL.backgroundColor-deprecated.attrib "
 %SMIL.pfx;background-color     CDATA    #IMPLIED
">

<!ENTITY % SMIL.Sub-region.attrib "
 %SMIL.pfx;top     CDATA    'auto'
 %SMIL.pfx;bottom  CDATA    'auto'
 %SMIL.pfx;left    CDATA    'auto'
 %SMIL.pfx;right   CDATA    'auto'
 %SMIL.pfx;height  CDATA    'auto'
 %SMIL.pfx;width   CDATA    'auto'
 %SMIL.pfx;z-index CDATA    #IMPLIED
">

<!ENTITY % SMIL.fit.attrib "
 %SMIL.pfx;fit            (hidden|fill|meet|meetBest|scroll|slice)   #IMPLIED 
">

<!-- ================== BackgroundTilingLayout ============================ -->
<!ENTITY % SMIL.backgroundImage.attrib "
  %SMIL.pfx;backgroundImage %URI.datatype; 'none'
">
<!ENTITY % SMIL.backgroundRepeat.attrib "
  %SMIL.pfx;backgroundRepeat (repeat|repeatX|repeatY|noRepeat|inherit) 'repeat'
">

<!-- ================ Registration Point attribute for media elements ===== -->
<!-- integrating language using AlignmentLayout must include regPoint   -->
<!-- attribute on media elements for regPoint elements to be useful        -->

<!ENTITY % SMIL.regPointAttr.attrib "
 %SMIL.pfx;regPoint  CDATA    #IMPLIED
">

<!ENTITY % SMIL.regAlign.attrib "
 %SMIL.pfx;regAlign  (topLeft|topMid|topRight|midLeft|center|
                     midRight|bottomLeft|bottomMid|bottomRight) #IMPLIED
">

<!ENTITY % SMIL.mediaAlign.attrib "
 %SMIL.pfx;mediaAlign (topLeft|topMid|topRight|midLeft|center|
                     midRight|bottomLeft|bottomMid|bottomRight) #IMPLIED
">

<!ENTITY % SMIL.soundAlign.attrib "
 %SMIL.pfx;soundAlign (left|both|right) #IMPLIED
">

<!ENTITY % SMIL.RegistrationPoint.attrib "
 %SMIL.regPointAttr.attrib;
 %SMIL.regAlign.attrib;
 %SMIL.mediaAlign.attrib;
">

<!--=================== Content Control =======================-->
<!-- customTest Attribute, do not confuse with customTest element! -->
<!ENTITY % SMIL.customTestAttr.attrib "
        %SMIL.pfx;customTest              CDATA          #IMPLIED
">

<!-- ========================= SkipContentControl Module ================== -->
<!ENTITY % SMIL.skip-content.attrib "
        %SMIL.pfx;skip-content          (true|false)    'true'
">

<!-- Content Control Test Attributes --> 

<!ENTITY % SMIL.Test.attrib "
        %SMIL.pfx;systemBitrate                 CDATA           #IMPLIED
        %SMIL.pfx;systemCaptions                (on|off)        #IMPLIED
        %SMIL.pfx;systemLanguage                CDATA           #IMPLIED
        %SMIL.pfx;systemOverdubOrSubtitle       (overdub|subtitle) #IMPLIED
        %SMIL.pfx;systemRequired                CDATA           #IMPLIED
        %SMIL.pfx;systemScreenSize              CDATA           #IMPLIED
        %SMIL.pfx;systemScreenDepth             CDATA           #IMPLIED
        %SMIL.pfx;systemAudioDesc               (on|off)        #IMPLIED
        %SMIL.pfx;systemOperatingSystem         NMTOKEN         #IMPLIED
        %SMIL.pfx;systemCPU                     NMTOKEN         #IMPLIED
        %SMIL.pfx;systemComponent               CDATA           #IMPLIED

        %SMIL.pfx;system-bitrate                CDATA           #IMPLIED
        %SMIL.pfx;system-captions               (on|off)        #IMPLIED
        %SMIL.pfx;system-language               CDATA           #IMPLIED
        %SMIL.pfx;system-overdub-or-caption     (overdub|caption) #IMPLIED
        %SMIL.pfx;system-required               CDATA           #IMPLIED
        %SMIL.pfx;system-screen-size            CDATA           #IMPLIED
        %SMIL.pfx;system-screen-depth           CDATA           #IMPLIED
">

<!-- SMIL Animation Module  =============================================== -->
<!ENTITY % SMIL.BasicAnimation.attrib "
  %SMIL.pfx;values     CDATA #IMPLIED
  %SMIL.pfx;from       CDATA #IMPLIED
  %SMIL.pfx;to         CDATA #IMPLIED
  %SMIL.pfx;by         CDATA #IMPLIED
">

<!-- SMIL Timing Module  ================================================== -->
<!ENTITY % SMIL.BasicInlineTiming.attrib "
  %SMIL.pfx;dur                       %TimeValue.datatype; #IMPLIED
  %SMIL.pfx;repeatCount               %TimeValue.datatype; #IMPLIED
  %SMIL.pfx;repeatDur                 %TimeValue.datatype; #IMPLIED
  %SMIL.pfx;begin                     %TimeValue.datatype; #IMPLIED
  %SMIL.pfx;end                       %TimeValue.datatype; #IMPLIED
">

<!ENTITY % SMIL.MinMaxTiming.attrib "
  %SMIL.pfx;min                       %TimeValue.datatype; '0'
  %SMIL.pfx;max                       %TimeValue.datatype; 'indefinite'
">

<!ENTITY % SMIL.BasicInlineTiming-deprecated.attrib "
  %SMIL.pfx;repeat                   %TimeValue.datatype; #IMPLIED
">

<!ENTITY % SMIL.fill.attrib "
 %SMIL.pfx;fill (remove|freeze|hold|transition|auto|default) 'default'
">

<!ENTITY % SMIL.fillDefault.attrib "
 %SMIL.pfx;fillDefault (remove|freeze|hold|transition|auto|inherit) 'inherit'
">

<!ENTITY % SMIL.endsync.attrib "
  %SMIL.pfx;endsync               CDATA 'last'
">

<!-- endsync has a different default when applied to media elements -->
<!ENTITY % SMIL.endsync.media.attrib "
  %SMIL.pfx;endsync               CDATA 'media'
">

<!ENTITY % SMIL.TimeContainerAttributes.attrib "
  %SMIL.pfx;timeAction            CDATA #IMPLIED
  %SMIL.pfx;timeContainer         CDATA #IMPLIED
">

<!ENTITY % SMIL.RestartTiming.attrib "
  %SMIL.pfx;restart (always|whenNotActive|never|default) 'default'
">

<!ENTITY % SMIL.RestartDefaultTiming.attrib "
  %SMIL.pfx;restartDefault (inherit|always|never|whenNotActive) 'inherit'
">

<!ENTITY % SMIL.SyncBehavior.attrib "
  %SMIL.pfx;syncBehavior (canSlip|locked|independent|default) 'default'
  %SMIL.pfx;syncTolerance %TimeValue.datatype;                'default'
">

<!ENTITY % SMIL.SyncBehaviorDefault.attrib "
  %SMIL.pfx;syncBehaviorDefault (canSlip|locked|independent|inherit) 'inherit'
  %SMIL.pfx;syncToleranceDefault  %TimeValue.datatype;               'inherit'
">

<!ENTITY % SMIL.SyncMaster.attrib "
  %SMIL.pfx;syncMaster    (true|false)                 'false'
">

<!-- ================== Time Manipulations ================================ -->
<!ENTITY % SMIL.TimeManipulations.attrib "
  %SMIL.pfx;accelerate          %Number.datatype; '0'
  %SMIL.pfx;decelerate          %Number.datatype; '0'
  %SMIL.pfx;speed               %Number.datatype; '1.0'
  %SMIL.pfx;autoReverse         (true|false)      'false'
">

<!-- ================== Media Objects ===================================== -->
<!ENTITY % SMIL.MediaClip.attrib "
  %SMIL.pfx;clipBegin      CDATA   #IMPLIED
  %SMIL.pfx;clipEnd        CDATA   #IMPLIED
">
<!ENTITY % SMIL.MediaClip.attrib.deprecated "
  %SMIL.pfx;clip-begin     CDATA   #IMPLIED
  %SMIL.pfx;clip-end       CDATA   #IMPLIED
">
<!ENTITY % SMIL.MediaObject.attrib "
  %SMIL.pfx;paramGroup     NMTOKEN #IMPLIED
">

<!-- ================== Streaming Media =================================== -->
<!ENTITY % SMIL.Streaming-media.attrib "
  %SMIL.pfx;port                  CDATA   #IMPLIED
  %SMIL.pfx;rtpformat             CDATA   #IMPLIED
  %SMIL.pfx;transport             CDATA   #IMPLIED
">

<!ENTITY % SMIL.Streaming-timecontainer.attrib "
  %SMIL.pfx;control               CDATA   #IMPLIED
">

<!-- ================== Transitions Media ================================= -->
<!ENTITY % SMIL.Transition.attrib "
 %SMIL.pfx;transIn                CDATA        #IMPLIED
 %SMIL.pfx;transOut               CDATA        #IMPLIED
">

<!-- end of smil-attribs-1.mod -->











  

A.3.3 A.3.3 SMIL 2.1 qualified names module

<!-- ....................................................................... -->
<!-- SMIL Qualified Names Module  .......................................... -->
<!-- file: smil-qname-1.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.
        
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

       PUBLIC "-//W3C//ENTITIES SMIL Qualified Names 1.0//EN"
       SYSTEM "http://www.w3.org/2005/SMIL21/smil-qname-1.mod"

     ....................................................................... -->

<!-- SMIL Qualified Names

     This module is contained in two parts, labeled Section 'A' and 'B':

       Section A declares parameter entities to support namespace-
       qualified names, namespace declarations, and name prefixing 
       for SMIL and extensions.
    
       Section B declares parameter entities used to provide
       namespace-qualified names for all SMIL element types:

         %SMIL.animation.qname; the xmlns-qualified name for <animation>
         %SMIL.video.qname;     the xmlns-qualified name for <video>
         ...

     SMIL extensions would create a module similar to this one, 
     using the '%smil-qname-extra.mod;' parameter entity to insert 
     it within Section A.  A template module suitable for this purpose 
     ('template-qname-1.mod') is included in the XHTML distribution.
-->

<!-- Section A: SMIL XML Namespace Framework :::::::::::::::::::: -->

<!-- 1. Declare the two parameter entities used to support XLink,
        first the parameter entity container for the URI used to
        identify the XLink namespace:
-->
<!ENTITY % XLINK.xmlns "http://www.w3.org/1999/xlink" >

<!-- This contains the XLink namespace declaration attribute.
-->
<!ENTITY % XLINK.xmlns.attrib
     "xmlns:xlink  %URI.datatype;           #FIXED '%XLINK.xmlns;'"
>

<!-- 2. Declare parameter entities (e.g., %SMIL.xmlns;) containing 
        the namespace URI for the SMIL namespace, and any namespaces
        included by SMIL:
-->

<!ENTITY % SMIL.xmlns  "http://www.w3.org/2005/SMIL21/" >

<!-- 3. Declare parameter entities (e.g., %SMIL.prefix;) containing
        the default namespace prefix string(s) to use when prefixing 
        is enabled. This may be overridden in the DTD driver or the
        internal subset of a document instance.

     NOTE: As specified in [XMLNAMES], the namespace prefix serves 
     as a proxy for the URI reference, and is not in itself significant.
-->
<!ENTITY % SMIL.prefix  "" >

<!-- 4. Declare a %SMIL.prefixed; conditional section keyword, used
        to activate namespace prefixing. The default value should 
        inherit '%NS.prefixed;' from the DTD driver, so that unless 
        overridden, the default behaviour follows the overall DTD 
        prefixing scheme.
-->
<!ENTITY % NS.prefixed "IGNORE" >
<!ENTITY % SMIL.prefixed "%NS.prefixed;" >

<!-- 5. Declare parameter entities (e.g., %SMIL.pfx;) containing the 
        colonized prefix(es) (e.g., '%SMIL.prefix;:') used when 
        prefixing is active, an empty string when it is not.
-->
<![%SMIL.prefixed;[
<!ENTITY % SMIL.pfx  "%SMIL.prefix;:" >
<!ENTITY % SMIL.xmlns.extra.attrib
        "xmlns:%SMIL.prefix;    %URI.datatype;  #FIXED  '%SMIL.xmlns;'" >

]]>
<!ENTITY % SMIL.pfx  "" >
<!ENTITY % SMIL.xmlns.extra.attrib "" >


<!-- declare qualified name extensions here -->
<!ENTITY % smil-qname-extra.mod "" >
%smil-qname-extra.mod;

<!-- 6. The parameter entity %SMIL.xmlns.extra.attrib; may be
        redeclared to contain any non-SMIL namespace declaration 
        attributes for namespaces embedded in SMIL. The default 
        is an empty string.  XLink should be included here if used 
        in the DTD and not already included by a previously-declared 
        %*.xmlns.extra.attrib;.
-->

<!-- 7. The parameter entity %NS.prefixed.attrib; is defined to be
        the prefix for SMIL elements if any and whatever is in
                SMIL.xmlns.extra.attrib.
-->
<!ENTITY % XHTML.xmlns.extra.attrib "%SMIL.xmlns.extra.attrib;" >


<!-- Section B: SMIL Qualified Names ::::::::::::::::::::::::::::: -->

<!-- This section declares parameter entities used to provide
     namespace-qualified names for all SMIL element types.
-->

<!ENTITY % SMIL.animate.qname "%SMIL.pfx;animate" >
<!ENTITY % SMIL.set.qname "%SMIL.pfx;set" >
<!ENTITY % SMIL.animateMotion.qname "%SMIL.pfx;animateMotion" >
<!ENTITY % SMIL.animateColor.qname "%SMIL.pfx;animateColor" >

<!ENTITY % SMIL.switch.qname "%SMIL.pfx;switch" >
<!ENTITY % SMIL.customTest.qname "%SMIL.pfx;customTest" >
<!ENTITY % SMIL.customAttributes.qname "%SMIL.pfx;customAttributes" >
<!ENTITY % SMIL.prefetch.qname "%SMIL.pfx;prefetch" >

<!ENTITY % SMIL.layout.qname "%SMIL.pfx;layout" >
<!ENTITY % SMIL.region.qname "%SMIL.pfx;region" >
<!ENTITY % SMIL.root-layout.qname "%SMIL.pfx;root-layout" >
<!ENTITY % SMIL.topLayout.qname "%SMIL.pfx;topLayout" >
<!ENTITY % SMIL.regPoint.qname "%SMIL.pfx;regPoint" >

<!ENTITY % SMIL.a.qname "%SMIL.pfx;a" >
<!ENTITY % SMIL.area.qname "%SMIL.pfx;area" >
<!ENTITY % SMIL.anchor.qname "%SMIL.pfx;anchor" >

<!ENTITY % SMIL.ref.qname "%SMIL.pfx;ref" >
<!ENTITY % SMIL.audio.qname "%SMIL.pfx;audio" >
<!ENTITY % SMIL.img.qname "%SMIL.pfx;img" >
<!ENTITY % SMIL.video.qname "%SMIL.pfx;video" >
<!ENTITY % SMIL.text.qname "%SMIL.pfx;text" >
<!ENTITY % SMIL.textstream.qname "%SMIL.pfx;textstream" >
<!ENTITY % SMIL.animation.qname "%SMIL.pfx;animation" >
<!ENTITY % SMIL.param.qname "%SMIL.pfx;param" >
<!ENTITY % SMIL.paramGroup.qname "%SMIL.pfx;paramGroup" >
<!ENTITY % SMIL.brush.qname "%SMIL.pfx;brush" >

<!ENTITY % SMIL.meta.qname "%SMIL.pfx;meta" >
<!ENTITY % SMIL.metadata.qname "%SMIL.pfx;metadata" >

<!ENTITY % SMIL.smil.qname "%SMIL.pfx;smil" >
<!ENTITY % SMIL.head.qname "%SMIL.pfx;head" >
<!ENTITY % SMIL.body.qname "%SMIL.pfx;body" >

<!ENTITY % SMIL.seq.qname "%SMIL.pfx;seq" >
<!ENTITY % SMIL.par.qname "%SMIL.pfx;par" >
<!ENTITY % SMIL.excl.qname "%SMIL.pfx;excl" >
<!ENTITY % SMIL.priorityClass.qname   "%SMIL.pfx;priorityClass">

<!ENTITY % SMIL.transition.qname "%SMIL.pfx;transition" >
<!ENTITY % SMIL.transitionFilter.qname "%SMIL.pfx;transitionFilter" >

<!-- end of smil-qname-1.mod -->











  

A.3.4 A.3.4 SMIL 2.1 framework module

<!-- ...................................................................... -->
<!-- SMIL 2.1 Modular Framework Module  ................................... -->
<!-- file: smil-framework-1.mod

     This is SMIL 2.1.

        Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
        Reserved.  See http://www.w3.org/Consortium/Legal/.

        Author:     Jacco van Ossenbruggen
        Editor for SMIL 2.1: Sjoerd Mullender, CWI
        $Revision: 1.7 $
        $Date: 2007/07/12 16:02:10 $

     This DTD module is identified by the PUBLIC and SYSTEM identifiers:

     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Modular Framework 1.0//EN"
     SYSTEM "http://www.w3.org/2005/SMIL21/smil-framework-1.mod"

         ....................................................................... -->

<!-- Modular Framework

     This required module instantiates the modules needed
     to support the SMIL 2.1 modularization model, including:

        +  datatypes
        +  namespace-qualified names
        +  common attributes
        +  document model
-->

<!ENTITY % smil-datatypes.module "INCLUDE" >
<![%smil-datatypes.module;[
<!ENTITY % smil-datatypes.mod
     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Datatypes 1.0//EN"
            "smil-datatypes-1.mod" >
%smil-datatypes.mod;]]>

<!ENTITY % smil-qname.module "INCLUDE" >
<![%smil-qname.module;[
<!ENTITY % smil-qname.mod
     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Qualified Names 1.0//EN"
            "smil-qname-1.mod" >
%smil-qname.mod;]]>

<!ENTITY % smil-attribs.module "INCLUDE" >
<![%smil-attribs.module;[
<!ENTITY % smil-attribs.mod
     PUBLIC "-//W3C//ENTITIES SMIL 2.1 Common Attributes 1.0//EN"
            "smil-attribs-1.mod" >
%smil-attribs.mod;]]>

<!ENTITY % smil-model.module "INCLUDE" >
<![%smil-model.module;[
<!-- A content model MUST be defined by the driver file -->
%smil-model.mod;]]>

<!-- end of smil-framework-1.mod -->











  

previous   next   contents