W3C

ericP's notes on: PROV-DM: The PROV Data Model

notes on 24 July 2012 LC

annotated version:
http://www.w3.org/TR/2012/WD-prov-dm-20120724/

Abstract

Provenance is information about entities, activities, and people involved in producing a piece of data or thing, which can be used to form assessments about its quality, reliability or trustworthiness. PROV-DM is the conceptual data model that forms a basis for the W3C provenance (PROV) family of specifications. PROV-DM distinguishes core structures, forming the essence of provenance information, from extended structures catering for more specific uses of provenance. PROV-DM is organized in six components, respectively dealing with: (1) entities and activities, and the time at which they were created, used, or ended; (2) derivations of entities from entities; (3) agents bearing responsibility for entities that were generated and activities that happened; (4) a notion of bundle, a mechanism to support provenance of provenance; (5) properties to link entities that refer to the same thing; and, (6) collections forming a logical structure for its members.

This document introduces the provenance concepts found in PROV and defines PROV-DM types and relations. The PROV data model is domain-agnostic, but is equipped with extensibility points allowing domain-specific information to be included.

Two further documents complete the specification of PROV-DM. First, a companion document specifies the set of constraints that provenance should follow. Second, a separate document describes a provenance notation for expressing instances of provenance for human consumption; this notation is used in examples in this document.

Status of This Document

elided

PROV Family of Specifications

This document is part of the PROV family of specifications, a set of specifications defining various aspects that are necessary to achieve the vision of inter-operable interchange of provenance information in heterogeneous environments such as the Web. The specifications are:

How to read the PROV Family of Specifications

Table of Contents

1. Introduction

For the purpose of this specification, provenance is defined as a record that describes the people, institutions, entities, and activities involved in producing, influencing, or delivering a piece of data or a thing. In particular, the provenance of information is crucial in deciding whether information is to be trusted, how it should be integrated with other diverse information sources, and how to give credit to its originators when reusing it. In an open and inclusive environment such as the Web, where users find information that is often contradictory or questionable, provenance can help those users to make trust judgements.

We present the PROV data model, PROV-DM, a generic data model for provenance that allows domain and application specific representations of provenance to be translated into such a data model and interchanged between systems. Thus, heterogeneous systems can export their native provenance into such a core data model, and applications that need to make sense of provenance can then import it, process it, and reason over it.

The PROV data model distinguishes core structures from extended structures: core structures form the essence of provenance information, and are commonly found in various domain-specific vocabularies that deal with provenance or similar kinds of information [Mappings]. Extended structures enhance and refine core structures with more expressive capabilities to cater for s/for/to/ more advanced uses of provenance. The PROV data model, comprising both core and extended structures, is a domain-agnostic model, but with clear extensibility points allowing further domain-specific and application-specific extensions to be defined.

The PROV data model has a modular design and is structured according to six components covering various facets of provenance:

This specification presents the concepts of the PROV Data Model, and provenance types and relations, without specific concern for how they are applied. With these, it becomes possible to write useful provenance, and publish or embed it alongside the data it relates to.

However, if something about which provenance is expressed is subject to change, then it is challenging to express its provenance precisely (e.g. the data from which a daily weather report is derived changes from day to day). This is addressed in a companion specification [PROV-CONSTRAINTS] by proposing formal constraints on the way that provenance is related to the things it describes (such as the use of attributes, temporal information and specialization of entities), and additional conclusions that are valid to infer.

1.1 Structure of this Document

Section 2 provides an overview of the PROV Data Model, distinguishing a core set of types and relations, commonly found in provenance, from extended structures catering for more specific uses. It also introduces a modular organization of the data model in components.

Section 3 overviews the Provenance Notation used to illustrate examples of provenance.

Section 4 illustrates how the PROV data model can be used to express the provenance of a report published on the Web.

Section 5 provides the definitions of PROV concepts, structured according to six components.

Section 6 summarizes PROV-DM extensibility points.

Section 7 introduces the idea that constraints can be applied to the PROV data model to validate provenance; these are covered in the companion specification [PROV-CONSTRAINTS].

1.2 Notational Conventions

The key words "must", "must not", "required", "shall", "shall not", "should", "should not", "recommended", "may", and "optional" in this document are to be interpreted as described in [RFC2119].

Examples throughout this document use the PROV-N Provenance Notation, briefly introduced in Section 3 and specified fully in a separate document [PROV-N].

1.3 Namespaces

The following namespaces prefixes are used throughout this document.

Table 1 ◊: Prefix and Namespaces used in this specification
prefixnamespace uri definition
provhttp://www.w3.org/ns/prov#The PROV namespace (see Section 5.7.4)
xsdhttp://www.w3.org/2000/10/XMLSchema#XML Schema Namespace [XMLSCHEMA11-2]
rdfhttp://www.w3.org/1999/02/22-rdf-syntax-ns#The RDF namespace [RDF-CONCEPTS]
(others)(various)All other namespace prefixes are used in examples only.
In particular, URIs starting with "http://example.com" represent
some application-dependent URI [URI]

2. PROV Overview

This section introduces provenance concepts with informal explanations and illustrative examples. PROV distinguishes core structures, forming the essence of provenance, from extended structures catering for more specific uses of provenance. Core and extended structures are respectively presented in Section 2.1 and Section 2.2. Furthermore, the PROV data model is organized according to components, which form thematic groupings of concepts (see Section 2.3). A provenance description is an instance of a core and extended provenance structure described below.

2.1 PROV Core Structures

At its core, provenance describes the use and production of entities by activities, which may be influenced in various ways by agents. These core types and their relationships are illustrated by the UML diagram of Figure 1.

PROV Core Structures
Figure 1 ◊: PROV Core Structures

The concepts found in the core of PROV are introduced in the rest of this section. They are summarized in Table 2, where they are categorized as type or relation informed by RDF, conincidence, or is this a universal distinction?. The first column lists concepts, the second column indicates whether a concept maps to a type or a relation, whereas the third column contains the corresponding PROV Ontology name, as it appears in Figure 1. Names of relations have a verbal form in the past tense to express what happened in the past, as opposed to what may or will happen. In the core of PROV, all relations are binary.

Table 2 ◊: Mapping of PROV core concepts to types and relations
PROV ConceptsPROV-DM types or relationsNameOverview
EntityPROV-DM TypesEntitySection 2.1.1
ActivityActivitySection 2.1.1
AgentAgentSection 2.1.3
GenerationPROV-DM RelationsWasGeneratedBySection 2.1.1
UsageUsedSection 2.1.1
CommunicationWasInformedBySection 2.1.1
DerivationWasDerivedFromSection 2.1.2
AttributionWasAttributedToSection 2.1.3
AssociationWasAssociatedWithSection 2.1.3
DelegationActedOnBehalfOfSection 2.1.3

2.1.1 Entity and Activity

In PROV, things we want to describe the provenance of are called entities and have some fixed aspects. The term "things" encompasses a broad diversity of notions, including digital objects such as a file or web page, physical things such as a mountain, a building, a printed book, or a car as well as abstract concepts and ideas.

An entity is a physical, digital, conceptual, or other kind of thing with some fixed aspects; entities may be real or imaginary. [Detailed specification]

Example 1

An entity may be the document at URI http://www.bbc.co.uk/news/science-environment-17526723, a file in a file system, a car, or an idea.

An activity is something that occurs over a period of time and acts upon or with entities; it may include consuming, processing, transforming, modifying, relocating, using, or generating entities. [Detailed specification] Just as entities cover a broad range of notions, activities can cover a broad range of notions: information processing activities may for example move, copy, or duplicate digital entities; physical activities can include driving a car from Boston to Cambridge or printing a book.

Example 2

An activity may be the publishing of a document on the Web, sending a twitter message, extracting metadata embedded in a file, driving a car from Boston to Cambridge repeat of above, assembling a data set based on a set of measurements, performing a statistical analysis over a data set, sorting news items according to some criteria, running a SPARQL query over a triple store, or editing a file.

Activities and entities are associated with each other in two different ways: activities utilize entities and activities produce entities. The act of utilizing or producing an entity may have a duration. The term 'generation' refers to the completion of the act of producing; likewise, the term 'usage' refers to the beginning of the act of utilizing entities. Thus, we define the following concepts of generation and usage.

Generation is the completion of production of a new entity by an activity. This entity did not exist before generation and becomes available for usage after this generation. [Detailed specification]

Usage is the beginning of utilizing an entity by an activity. Before usage, the activity had not begun to utilize this entity and could not have been affected by the entity. [Detailed specification]

Example 3

Examples of generation are the completed creation of a file by a program, the completed creation of a linked data set, and the completed publication of a new version of a document.

One might reasonably ask what entities are used and generated by driving a car from Boston to Cambridge. This is answered by considering that a single artifact may correspond to several entities; in this case, a car in Boston may be a different entity from a car in Cambridge. Thus, among other things, an entity "car in Boston" would be used, and a new entity "car in Cambridge" would be generated by this activity of driving feels academic, but OK. I guess. The provenance trace of the car might include: designed in Japan, manufactured in Korea, shipped to Boston USA, purchased by customer, driven to Cambridge, serviced by engineer in Cambridge, etc., all of which might be important information when deciding whether or not it represents a sensible second-hand purchase. Or some of it might alternatively be relevant when trying to determine the truth of a web page reporting a traffic violation involving that car. This breadth of provenance allows descriptions of interactions between physical and digital artifacts.

Example 4

Usage examples include a procedure beginning to consume an argument, a service starting to read a value on a port, a program beginning to read a configuration file, or the point at which an ingredient, such as eggs, is being added in a baking activity. Usage may entirely consume an entity (e.g. eggs are no longer available after being added to the mix); in contrast, the same entity may be used multiple times, possibly by different activities (e.g. a file on a file system can be read indefinitely).

The generation of an entity by an activity and its subsequent usage by another activity is termed communication.

Communication is the exchange of some unspecified entity by two activities, one activity using some entity generated by the other. [Detailed specification]

Example 5

The activity of writing a celebrity article was informed by (a communication instance) the activity of intercepting voicemails.

2.1.2 Derivation

Activities utilize entities and produce entities. In some cases, utilizing an entity influences the creation of another in some way. This notion of 'influence' is captured by derivations, defined as follows.

A derivation is a transformation of an entity into another, an update of an entity resulting in a new one, or the construction of a new entity based on a pre-existing entity. [Detailed specification]

Example 6

Examples of derivation include the transformation of a relational table into a linked data set, the transformation of a canvas into a painting, the transportation of a work of art from London to New York, and a physical transformation such as the melting of ice into water.

While the basic idea is simple, the concept of derivation can be quite subtle: implicit is the notion that the generated entity was affected in some way by the used entity. If an artifact was used by an activity that also generated a new artifact, it does not always follow that the second artifact was derived from the first. In the activity of creating a painting, an artist may have mixed some paint that was never actually applied to the canvas: the painting would typically not be considered a derivation from the unused paint. PROV does not attempt to specify the conditions under which derivations exist; rather, derivation is considered to have been determined by unspecified means. Thus, while a chain of usage and generation is necessary for a derivation to hold between entities, it is not sufficient; some form of influence occurring during the activities involved is also needed.

2.1.3 Agents and Responsibility

For many purposes, a key consideration for deciding whether something is reliable and/or trustworthy is knowing who or what was reponsible for its production. Data published by a respected independent organization may be considered more trustworthy than that from a lobby organization; a claim by a well-known scientist with an established track record may be more believed than a claim by a new student; a calculation performed by an established software library may be more reliable than by a one-off program.

An agent is something that bears some form of responsibility for an activity taking place, for the existence of an entity, or for another agent's activity. [Detailed specification] An agent may be a particular type of entity or activity. This means that the model can be used to express provenance of the agents themselves.

Example 7

Software for checking the use of grammar in a document may be defined as an agent of a document preparation activity; one can also describe its provenance, including for instance the vendor and the version history. A site selling books on the Web, the services involved in the processing of orders, and the companies hosting them are also agents.

Agents can be related to entities, activities, and other agents.

Attribution is the ascribing of an entity to an agent. [Detailed specification]

Example 8

A blog post can be attributed to an author, a mobile phone to its manufacturer.

Agents are defined as having some kind of responsibility for activities.

An activity association is an assignment of responsibility to an agent for an activity, indicating that the agent had a role in the activity. [Detailed specification]

Example 9

Examples of association between an activity and an agent are:

  • creation of a web page under the guidance of a designer;
  • various forms of participation in a panel discussion, including audience member, panelist, or panel chair;
  • a public event, sponsored by a company, and hosted by a museum;

Delegation is the assignment of authority and responsibility to an agent (by itself or by another agent) to carry out a specific activity as a delegate or representative, while the agent it acts on behalf of retains some responsibility for the outcome of the delegated work. [Detailed specification] The nature of this relation is intended to be broad, including contractual relation, but also altruistic initiative by the representative agent.

Example 10

A student publishing a web page describing an academic department could result in both the student and the department being agents associated with the activity. It may not matter which actual student published a web page, but it may matter significantly that the department told the student to put up the web page.

2.2 PROV Extended Structures

While the core of PROV focuses on essential provenance structures commonly found in provenance descriptions, extended structures are designed to support more advanced uses of provenance. The purpose of this section is twofold. First, mechanisms to specify these extended structures are introduced. Second, two further kinds of provenance structures are overviewed: they cater for s/for/to/ provenance of provenance and collections, respectively.

2.2.1 Mechanisms to Define Extended Structures

Extended structures are defined by a variety of mechanisms outlined in this section: subtyping, expanded relations, optional identification, and new relations.

2.2.1.1 Subtyping

Subtyping can be applied to core types. For example, a software agent is special kind of agent, defined as follows.

A software agent is running software.

Subtyping can also be applied to core relations. For example, a revision is a special kind of derivation, defined as follows.

A revision is a derivation for which the resulting entity is a revised version of some original.

2.2.1.2 Expanded Relations

Section 2.1 shows that seven concepts are mapped to binary relations in the core of PROV. However, some advanced uses of these concepts cannot be captured by a binary relation, but require relations to be expanded to n-ary relations.

To illustrate expanded relations, we consider the concept of association, described in Section 2.1.3. Agents may adopt plans, i.e. sets of actions or steps, to achieve their goals in the context of an activity. Hence, an expanded form of association relation allows for a plan to be specified. Plan is defined by subtyping and full association what's full association? by an expanded relation, as follows.

A plan is an entity that represents a set of actions or steps intended by one or more agents to achieve some goals.

An activity association is an assignment of responsibility to an agent for an activity, indicating that the agent had a role in the activity repeated from above. It further allows for a plan to be specified, which is the plan intended by the agent to achieve some goals in the context of this activity.

There exist no prescriptive requirement on the nature of plans, their representation, the actions or steps they consist of, or their intended goals. Since plans may evolve over time, it may become necessary to track their provenance, so plans themselves are entities. Representing the plan explicitly in the provenance can be useful for various tasks: for example, to validate the execution as represented in the provenance record, to manage expectation failures, or to provide explanations.

Example 11

An example of association between an activity and an agent involving a plan is: an XSLT transform (an activity) launched by a user (an agent) based on an XSL style sheet (a plan) so plans can be machine-readable, declarative code.

2.2.1.3 Optional Identification

Some concepts exhibit both a core use, expressed as binary relation, and an extended use, expressed as n-ary relation. In some cases, mapping the concept to a relation, whether binary or n-ary, is not sufficient: instead, it may be required to identify an instance of such concept. In those cases, PROV-DM allows for an optional identifier to be expressed to identify an instance of an association between two or more elements. This optional identifier can then be used to refer to an instance as part of other concepts.

Example 12

A service may read a same configuration file on two different occasions. Each usage can be identifed by its own identifier, allowing them to be distinguished.

2.2.1.4 Further Relations

Finally, PROV-DM supports further relations that are not subtypes or expanded versions of existing relations (such as specialization, alternate).

2.2.2 Provenance of Provenance

A bundle is a named set of provenance descriptions, and is itself an entity, so allowing provenance of provenance to be expressed.

For users to decide whether they can place their trust in something, they may want to analyze its provenance, but also determine the agent its provenance is attributed to, and when it was generated. In other words, users need to be able to determine the provenance of provenance. Hence, provenance is also regarded as an entity (of type Bundle), by which provenance of provenance can then be expressed.

Example 13

In a decision making situation, decision makers may be presented with the same piece of knowledge, issued by multiple sources. In order to validate this piece of knowledge, decision makers can consider its provenance, but also the provenance of their provenance, which may help determine whether it can be trusted.

2.2.3 Collections

A collection is an entity that provides a structure to some constituents, which are themselves entities. These constituents are said to be member of the collections. Many different types of collections exist, such as sets, dictionaries, or lists. Using Collections, one can express the provenance of the collection itself in addition to that of the members.

Example 14

An example of collection is an archive of documents. Each document has its own provenance, but the archive itself also has some provenance: who maintained it, which documents it contained at which point in time, how it was assembled, etc.

2.3 Modular Organization

Besides the separation between core and extended structures, PROV-DM is further organized according to components, grouping concepts in a thematic manner.

Table 3 enumerates the six components, five of which have already been implicitly overviewed in this section. All components contain extended structures, whereas only the first three contain core structures.

Table 3 ◊: Components Overview
ComponentCore
Structures
OverviewSpecificationDescription
1Entities and Activities2.1.15.1about entities and activities, and their interrelations
2Derivation2.1.25.2about derivations and its subtypes
3Agent and Responsibility2.1.35.3about agents and concepts ascribing responsibility to them
4Bundles2.2.25.4about bundles, a mechanism to support provenance of provenance
5Alternate5.5about relations linking entities referring the same thing
6Collections2.2.35.6about collections

3. The Provenance Notation

To illustrate the application of PROV concepts to a concrete example (see Section 4) and to provide examples of concepts (see Section 5), we introduce PROV-N, a notation for writing instances of the PROV data model. For full details, the reader is referred to the companion specification [PROV-N]. PROV-N is a notation aimed at human consumption, with the following characteristics:

Example 15

An activity with identifier a1 and an attribute type with value createFile.

activity(a1, [prov:type="createFile"])
Two entities with identifiers e1 and e2.
entity(e1)
entity(e2)
The activity a1 used e1, and e2 was generated by a1.
used(a1,e1)
wasGeneratedBy(e2,a1)
The same descriptions, but with an explicit identifier u1 for the usage, and the syntactic marker '-' to mark the absence of identifier in the generation. Both are followed by ';'.
used(u1;a1,e1)
wasGeneratedBy(-;e2,a1)

4. Illustration of PROV-DM by an Example

Section 2 has introduced some provenance concepts, and how they are expressed as types or relations in the PROV data model. The purpose of this section is to put these concepts into practice in order to express the provenance of some document published on the Web. With this realistic example, PROV concepts are composed together, and a graphical illustration shows a provenance description forming a directed graph, rooted at the entity we want to explain the provenance of, and pointing to the entities, activities, and agents it depended on. This example also shows that, sometimes, multiple provenance descriptions about the same entity can co-exist, which then justifies the need for provenance of provenance.

In this example, we consider one of the many documents published by the World Wide Web Consortium, and describe its provenance. Specifically, we consider the document identified by http://www.w3.org/TR/2011/WD-prov-dm-20111215. Its provenance can be expressed from several perspectives: first, provenance can take the authors' viewpoint; second, it can be concerned with the W3C process. Then, attribution of these two provenance descriptions is provided.

4.1 Example: The Authors View

Description: A document is edited by some editor, using contributions from various contributors.

In this perspective, provenance of the document http://www.w3.org/TR/2011/WD-prov-dm-20111215 is concerned with the editing activity as perceived by authors. This kind of information could be used by authors in their CV or in a narrative about this document.

We paraphrase some PROV-DM descriptions, express them with the PROV-N notation, and depict them with a graphical illustration (see Figure 2). Full details of the provenance record can be found here Vapid link text is an impediment to accessibility; propose: See also the complete provenance record ex:author-view..

Provenance of a Document (1)
Figure 2 ◊: Provenance of a Document (1) This image does not include the namespace prefixes below (tr:, prov:)

Provenance descriptions can be illustrated graphically. The illustration is not intended to represent all the details of the model, but it is intended to show the essence of a set of provenance descriptions. Therefore, it should not be seen as an alternate notation for expressing provenance.

The s/The/This/ if this not a general statement about graphical representations of PROV. graphical illustration takes the form of a graph. Entities, activities and agents are represented as nodes, with oval, rectangular, and pentagonal shapes, respectively. Usage, Generation, Derivation, and Association are represented as directed edges.

Entities are laid out according to the ordering of their generation. We endeavor to show time progressing from left to right. This means that edges for Usage, Generation, Derivation, Association typically point leftwards

4.2 Example: The Process View

Description: The World Wide Web Consortium publishes documents according to its publication policy. Working drafts are published regularly to reflect the work accomplished by working groups. Every publication of a working draft must be preceded by a "publication request" to the Webmaster. The very first version of a document must also be preceded by a "transition request" to be approved by the W3C director. All working drafts are made available at a unique URI. In this scenario, we consider two successive versions of a given document, the policy according to which they were published, and the associated requests.

We describe the kind of provenance record that the WWW Consortium could keep for auditors to check that due processes are followed. All entities involved in this example are Web resources, with well-defined URIs (some of which refer to archived email messages, available to W3C Members).

We now paraphrase some PROV descriptions, and express them with the PROV-N notation, and depict them with a graphical illustration (see Figure 3). Full details of the provenance record can be found here propose: See also the complete provenance record ex:process-view.. The explanation for arrows anchored on other arrows is burried a ways below. Move up to here or just have a node with activity, agent and plan arcs?

Provenance of a Document (2)
Figure 3 ◊: Provenance of a Document (2)

This simple example has shown a variety of PROV concepts, such as Entity, Agent, Activity, Usage, Generation, Derivation, and Association. In this example, it happens that all entities were already Web resources, with readily available URIs, which we used. We note that some of the resources are public, whereas others have restricted access: provenance statements only make use of their identifiers. If identifiers do not pre-exist, e.g. for activities, then they can be generated, for instance ex:act2, occurring in the namespace identified by prefix ex. We note that the URI scheme developed by W3C is particularly suited for expressing provenance of these documents, since each URI denotes a specific version of a document. It then becomes easy to relate the various versions with PROV-DM relations. We note that an Association is a ternary relation (represented by a multi-edge labeled wasAssociatedWith) from an activity to an agent and a plan.

4.3 Example: Attribution of Provenance

The two previous sections offer two different perspectives on the provenance of a document. PROV allows for multiple sources to provide the provenance of a subject. For users to decide whether they can place their trust in the document, they may want to analyze its provenance, but also determine who the provenance is attributed to, and when it was generated, etc. In other words, we need to be able to express the provenance of provenance.

PROV-DM offers a construct to name a bundle of provenance descriptions (full details: ex:author-view).

bundle ex:author-view

  agent(ex:Paolo,   [ prov:type='prov:Person' ])
  agent(ex:Simon,   [ prov:type='prov:Person' ])


...

endBundle
Likewise, the process view can be expressed as a separate named bundle (full details: ex:process-view).
bundle ex:process-view

   agent(w3:Consortium, [ prov:type='prov:Organization' ])

...

endBundle

To express their respective provenance, these bundles must be seen as entities, and s/and/so that/ all PROV constructs are now s/now// available to express their provenance. In the example below, ex:author-view is attributed to the agent ex:Simon, whereas ex:process-view to w3:Consortium.

entity(ex:author-view, [prov:type='prov:Bundle' ])
wasAttributedTo(ex:author-view, ex:Simon)

entity(ex:process-view, [prov:type='prov:Bundle' ])
wasAttributedTo(ex:process-view, w3:Consortium)

5. PROV-DM Types and Relations

Provenance concepts, expressed as PROV-DM types and relations, are organized according to six components that are defined in this section. The components and their dependencies are illustrated in Figure 4. A component that relies on concepts defined in another is displayed above it in the figure. So, for example, component 5 (alternate) depends on concepts defined in component 4 (bundles), itself dependent on concepts defined in component 1 (entity and activity).

PROV-DM Components agents/responsibility agents/responsibility agents/responsibility derivations derivations alternate alternate collections activities/entities bundles
Figure 4 ◊: PROV-DM Components

While not all PROV-DM relations are binary, they all involve two primary elements. Hence, Table 4 indexes all relations according to their two primary elements (referred to as subject and object). The table adopts the same color scheme as Figure 4, allowing components to be readily identified. Note that for simplicity, this table does not include collection-oriented relations. Relation names appearing in bold correspond to the core structures introduced in Section 2.1.

Table 4 ◊: PROV-DM Relations At a Glance
Object
EntityActivityAgent
SubjectEntityWasGeneratedBy
WasInvalidatedBy
R
T
L
WasAttributedTo
ActivityUsed
WasStartedBy
WasEndedBy
R
T
L
WasInformedByWasAssociatedWithR
AgentActedOnBehalfOf

The letters 'R' and 'L' appearing in the right-hand side of some cells of Table 4 indicate that attributes prov:role (Section 5.7.2.3) and prov:location (Section 5.7.2.2) are permitted for these relations. The letter 'T' indicates an optional time is also permitted.

Table 5 is a complete index of all the types and relations of PROV-DM, color-coded according to the component they belong to. In the first column, concept names link to their informal definition, whereas, in the second column, representations link to the information used to represent the concept. Concept names appearing in bold are the core structures introduced in Section 2.1.

Table 5 ◊: PROV-DM Types and Relations
Type or Relation NameRepresentation in the PROV-N notationComponent
Entityentity(id, [ attr1=val1, ...])Component 1: Entities/Activities
Activityactivity(id, st, et, [ attr1=val1, ...])
GenerationwasGeneratedBy(id;e,a,t,attrs)
Usageused(id;a,e,t,attrs)
CommunicationwasInformedBy(id;a2,a1,attrs)
StartwasStartedBy(id;a2,e,a1,t,attrs)
EndwasEndedBy(id;a2,e,a1,t,attrs)
InvalidationwasInvalidatedBy(id;e,a,t,attrs)
DerivationwasDerivedFrom(id; e2, e1, a, g2, u1, attrs)Component 2: Derivations
Revision... prov:type='prov:Revision' ...
Quotation... prov:type='prov:Quotation' ...
Primary Source... prov:type='prov:PrimarySource' ...
Agentagent(id, [ attr1=val1, ...])Component 3: Agents, Responsibility, Influence
AttributionwasAttributedTo(id;e,ag,attr)
AssociationwasAssociatedWith(id;a,ag,pl,attrs)
DelegationactedOnBehalfOf(id;ag2,ag1,a,attrs)
Plan... prov:type='prov:Plan' ...
Person... prov:type='prov:Person' ...
Organization... prov:type='prov:Organization' ...
SoftwareAgent... prov:type='prov:SoftwareAgent' ...
InfluencewasInfluencedBy(id;e2,e1,attrs)
Bundle constructorbundle id description_1 ... description_n endBundleComponent 4: Bundles
Bundle type... prov:type='prov:Bundle' ...
AlternatealternateOf(alt1, alt2)Component 5: Alternate
SpecializationspecializationOf(infra, supra)
MentionmentionOf(infra, supra,bundle)
Collection... prov:type='prov:Collection' ...Component 6: Collections
EmptyCollection... prov:type='prov:EmptyCollection' ...
MembershiphadMember(c,e)

In the rest of the section, each type and relation is defined informally, followed by a summary of the information used to represent the concept, and illustrated with PROV-N examples.

5.1 Component 1: Entities and Activities

The first component of PROV-DM is concerned with entities and activities, and their interrelations: Usage, Generation, Start, End, Invalidation, and Communication. Figure 5 uses UML to depict the first component. Core structures are displayed in the yellow area, consisting of two classes (Entity, Activity) and three binary associations between them (Usage, Generation, and Communication). The rest of the figure displays extended structures, including UML association classes (see [UML], section 7.3.4, p. 42), represented in gray, to express expanded n-ary relations (for Usage, Generation, Invalidation, Start, End). The figure also makes explicit associations with time for these concepts (time being marked with the primitive stereotype). When not specified, cardinality is assumed to be 0..*.

entities and activities
Figure 5 ◊: Entities and Activities Component Overview

5.1.1 Entity

An entity is a physical, digital, conceptual, or other kind of thing with some fixed aspects; entities may be real or imaginary.

An entity, written entity(id, [attr1=val1, ...]) in PROV-N, has:
  • id: an identifier for an entity;
  • attributes: an optional set of attribute-value pairs ((attr1, val1), ...) representing additional information about this entity.
Example 16

The following expression

entity(tr:WD-prov-dm-20111215, [ prov:type="document", ex:version="2" ])
states the existence of an entity, denoted by identifier tr:WD-prov-dm-20111215, with type document and version number 2. The attribute ex:version is application specific, whereas the attribute type (see Section 5.7.4.4) is reserved in the PROV namespace.

5.1.2 Activity

An activity is something that occurs over a period of time and acts upon or with entities; it may include consuming, processing, transforming, modifying, relocating, using, or generating entities.

An activity, written activity(id, st, et, [attr1=val1, ...]) in PROV-N, has:
  • id: an identifier for an activity;
  • startTime: an optional time (st) for the start of the activity;
  • endTime: an optional time (et) for the end of the activity;
  • attributes: an optional set of attribute-value pairs ((attr1, val1), ...) representing additional information about this activity.
Example 17

The following expression

activity(a1,2011-11-16T16:05:00,2011-11-16T16:06:00,
        [ ex:host="server.example.org", prov:type='ex:edit' ])

states the existence of an activity with identifier a1, start time 2011-11-16T16:05:00, and end time 2011-11-16T16:06:00, running on host server.example.org, and of type edit. The attribute host is application specific (declared in some namespace with prefix ex). The attribute type is a reserved attribute of PROV-DM, allowing for sub-typing to be expressed (see Section 5.7.4.4).

Further considerations:

  • An activity is not an entity. This distinction is similar to the distinction between 'continuant' and 'occurrent' in logic [Logic].

5.1.3 Generation

Generation is the completion of production of a new entity by an activity. This entity did not exist before generation and becomes available for usage after this generation.

Generation, written wasGeneratedBy(id; e, a, t, attrs) in PROV-N, has:
  • id: an optional identifier for a generation;
  • entity: an identifier (e) for a created entity;
  • activity: an optional identifier (a) for the activity that creates the entity;
  • time: an optional "generation time" (t), the time at which the entity was completely created;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this generation.

While each of id, activity, time, and attributes is optional, at least one of them must be present.

Example 18

The following expressions

  wasGeneratedBy(e1, a1, 2001-10-26T21:32:52, [ ex:port="p1" ])
  wasGeneratedBy(e2, a1, 2001-10-26T10:00:00, [ ex:port="p2" ])

state the existence of two generations (with respective times 2001-10-26T21:32:52 and 2001-10-26T10:00:00), at which new entities, identified by e1 and e2, are created by an activity, identified by a1. The first one is available on port p1, whereas the other is available on port p2. The semantics of port are application specific.

Example 19

In some cases, we may want to record the time at which an entity was generated without having to specify the activity that generated it. To support this requirement, the activity element in generation is optional. Hence, the following expression indicates the time at which an entity is generated, without naming the activity that did it.

  wasGeneratedBy(e, -, 2001-10-26T21:32:52)

5.1.4 Usage

Usage is the beginning of utilizing an entity by an activity. Before usage, the activity had not begun to utilize this entity and could not have been affected by the entity. (Note: This definition is formulated for a given usage; it is permitted for an activity to have used a same entity multiple times.)

Usage, written used(id; a, e, t, attrs) in PROV-N, has:
  • id: an optional identifier for a usage;
  • activity: an identifier (a) for the activity that used an entity;
  • entity: an optional identifier (e) for the entity being used;
  • time: an optional "usage time" (t), the time at which the entity started to be used;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this usage.

While each of id, entity, time, and attributes is optional, at least one of them must be present.

A reference to a given entity may appear in multiple usages that share a given activity identifier.

Example 20

The following usages

  used(a1, e1, 2011-11-16T16:00:00, [ ex:parameter="p1" ])
  used(a1, e2, 2011-11-16T16:00:01, [ ex:parameter="p2" ])

state that the activity identified by a1 used two entities identified by e1 and e2, at times 2011-11-16T16:00:00 and 2011-11-16T16:00:01, respectively; the first one was found as the value of parameter p1, whereas the second was found as value of parameter p2. The semantics of parameter is application specific.

5.1.5 Communication

Communication is the exchange of some unspecified entity by two activities, one activity using some entity generated by the other.

A communication implies that activity a2 is dependent on another a1, by way of some unspecified entity that is generated by a1 and used by a2.

A communication, written as wasInformedBy(id; a2, a1, attrs) in PROV-N, has:
  • id: an optional identifier identifying the relation;
  • informed: the identifier (a2) of the informed activity;
  • informant: the identifier (a1) of the informant activity;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this communication.
Example 21

Consider two activities a1 and a2, the former performed by a government agency, and the latter by a driver caught speeding.

activity(a1, [ prov:type="traffic regulations enforcing" ])
activity(a2, [ prov:type="fine paying, check writing, and mailing" ])
wasInformedBy(a2, a1)
The last line indicates that some implicit entity was generated by a1 and used by a2; this entity may be a traffic ticket that had a notice of fine, amount, and payment mailing details.

5.1.6 Start

Start is when an activity is deemed to have started. The activity did not exist before its start. Any usage or generation involving an activity follows the activity's start. A start may refer to an entity, known as trigger, that set off the activity, or to an activity, known as starter, that generated the trigger.

An activity start, written wasStartedBy(id; a2, e, a1, t, attrs) in PROV-N, has:
  • id: an optional identifier for the activity start;
  • activity: an identifier (a2) for the started activity;
  • trigger: an optional identifier (e) for the entity triggering the activity;
  • starter: an optional identifier (a1) for the activity that generated the (possibly unspecified) entity (e);
  • time: the optional time (t) at which the activity was started;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this activity start.

While each of id, trigger, starter, time, and attributes is optional, at least one of them must be present.

Example 22

The following example contains the description of an activity a1 (a discussion), which was started at a specific time, and was triggered by an email message e1.

entity(e1, [ prov:type="email message"] )
activity(a1, [ prov:type="Discuss" ])
wasStartedBy(a1, e1, -, 2011-11-16T16:05:00)
Furthermore, if the message is also an input to the activity, this can be described as follows:
used(a1, e1, -)

Alternatively, one can also describe the activity that generated the email message.

activity(a0, [ prov:type="Write" ])
wasGeneratedBy(e1, a0)
wasStartedBy(a1, e1, a0, 2011-11-16T16:05:00)

If e1 is not known, it would also be valid to write:

wasStartedBy(a1, -, a0, 2011-11-16T16:05:00)
Example 23

In the following example, a race is started by a bang, and responsibility for this trigger is attributed to an agent ex:Bob.

activity(ex:foot_race)
entity(ex:bang)
wasStartedBy(ex:foot_race, ex:bang, -, 2012-03-09T08:05:08-05:00)
agent(ex:Bob)
wasAttributedTo(ex:bang, ex:Bob)
Example 24

In this example, filling fuel was started as a consequence of observing low fuel. The trigger entity is unspecified, it could for instance have been the low fuel warning light, the fuel tank indicator needle position, or the engine not running properly.

activity(ex:filling-fuel)
activity(ex:observing-low-fuel)

agent(ex:driver, [ prov:type='prov:Person'  )
wasAssociatedWith(ex:filling-fuel, ex:driver)
wasAssociatedWith(ex:observing-low-fuel, ex:driver)

wasStartedBy(ex:filling-fuel, -, ex:observing-low-fuel, -)

The relations wasStartedBy and used are orthogonal, and thus need to be expressed independently, according to the situation being described.

5.1.7 End

End is when an activity is deemed to have ended. The activity no longer exists after its end. Any usage, generation, or invalidation involving an activity precedes the activity's end. An end may refer to an entity, known as trigger, that terminated the activity, or to an activity, known as ender that generated the trigger.

An activity end, written wasEndedBy(id; a2, e, a1, t, attrs) in PROV-N, has:
  • id: an optional identifier for the activity end;
  • activity: an identifier (a2) for the ended activity;
  • trigger: an optional identifier (e) for the entity triggering the activity ending;
  • ender: an optional identifier (a1) for the activity that generated the (possibly unspecified) entity (e);
  • time: the optional time (t) at which the activity was ended;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this activity end.

While each of id, trigger, ender, time, and attributes is optional, at least one of them must be present.

Example 25

The following example is a description of an activity a1 (editing) that was ended following an approval document e1.

entity(e1, [ prov:type="approval document" ])
activity(a1, [ prov:type="Editing" ])
wasEndedBy(a1, e1)

5.1.8 Invalidation

Invalidation is the start of the destruction, cessation, or expiry of an existing entity by an activity. The entity is no longer available for use (or further invalidation) after invalidation. Any generation or usage of an entity precedes its invalidation.

Entities have a duration. Generation marks the beginning of an entity, whereas invalidation marks its end. An entity's lifetime can end for different reasons:

  • an entity was destroyed: e.g. a painting was destroyed by fire; a Web page is taken out of a site;
  • an entity was consumed: e.g. Bob ate all his soup, Alice ran out of gas when driving to work;
  • an entity expires: e.g. a "buy one beer, get one free" offer is valid during happy hour (7-8pm);
  • an entity is time limited: e.g. the BBC news site on April 3rd, 2012;
  • an entity attribute is changing: e.g. the traffic light changed from green to red.

In the first two cases, the entity has physically disappeared after its termination: there is no more soup, or painting. In the last three cases, there may be an "offer voucher" that still exists, but it is no longer valid; likewise, on April 4th, the BBC news site still exists but it is not the same entity as BBC news Web site on April 3rd; or the traffic light became red and therefore is regarded as a different entity to the green light.

Invalidation, written wasInvalidatedBy(id; e, a, t, attrs) in PROV-N, has:
  • id: an optional identifier for a invalidation;
  • entity: an identifier for the invalidated entity;
  • activity: an optional identifier for the activity that invalidated the entity;
  • time: an optional "invalidation time", the time at which the entity began to be invalidated;
  • attributes: an optional set of attribute-value pairs representing additional information about this invalidation.

While each of id, activity, time, and attributes is optional, at least one of them must be present.

Example 26

The Painter, a Picasso painting, is known to have been destroyed in a plane accident.

entity(ex:The-Painter)
agent(ex:Picasso)
wasAttributedTo(ex:The-Painter, ex:Picasso)
activity(ex:crash)
wasInvalidatedBy(ex:The-Painter, ex:crash, 1998-09-03T01:31:00, [ ex:circumstances="plane accident" ])
Example 27

The BBC news home page on 2012-04-03 ex:bbcNews2012-04-03 contained a reference to a given news item bbc:news/uk-17595024, but the BBC news home page on the next day did not.

entity(ex:bbcNews2012-04-03)
hadMember(ex:bbcNews2012-04-03, bbc:news/uk-17595024)
wasGeneratedBy  (ex:bbcNews2012-04-03, -, 2012-04-03T00:00:01)
wasInvalidatedBy(ex:bbcNews2012-04-03, -, 2012-04-03T23:59:59)
We refer to example Example 42 for further descriptions of the BBC Web site, and to Section 5.6.2 for a description of the relation hadMember.
Example 28

In this example, the "buy one beer, get one free" offer expired at the end of the happy hour.

entity(buy_one_beer_get_one_free_offer_during_happy_hour)
wasAttributedTo(proprietor)
wasInvalidatedBy(buy_one_beer_get_one_free_offer_during_happy_hour,
                 -,2012-03-10T18:00:00)

In contrast, in the following descriptions, Bob redeemed the offer 45 minutes before it expired, and got two beers.

entity(buy_one_beer_get_one_free_offer_during_happy_hour)
wasAttributedTo(proprietor)
activity(redeemOffer)
entity(twoBeers)

wasAssociatedWith(redeemOffer,bob)
used(buy_one_beer_get_one_free_offer_during_happy_hour,
     redeemOffer, 2012-03-10T17:15:00)
wasInvalidatedBy(buy_one_beer_get_one_free_offer_during_happy_hour,
                 redeemOffer, 2012-03-10T17:15:00)
wasGeneratedBy(twoBeers,redeemOffer)

We see that the offer was both used to be converted into twoBeers and invalidated by the redeemOffer activity: in other words, the combined usage and invalidation indicate consumption of the offer.

5.2 Component 2: Derivations

The third component of PROV-DM is concerned with: derivations of entities from other entities and derivation subtypes Revision, Quotation, and Primary Source. Figure 6 depicts the third component with PROV core structures in the yellow area, including two classes (Entity, Activity) and binary association (Derivation). PROV extended structures are found outside this area. UML association classes express expanded n-ary relations. The subclasses are marked by the UML stereotype "prov:type" to indicate that the corresponding types are valid values for the attribute prov:type.

derivation
Figure 6 ◊: Derivation Component Overview

5.2.1 Derivation

A derivation is a transformation of an entity into another, an update of an entity resulting in a new one, or the construction of a new entity based on a pre-existing entity.

According to Section 2, for an entity to be transformed from, created from, or resulting from an update to another, there must be some underpinning activities performing the necessary actions resulting in such a derivation. A derivation can be described at various levels of precision. In its simplest form, derivation relates two entities. Optionally, attributes can be added to represent further information about the derivation. If the derivation is the result of a single known activity, then this activity can also be optionally expressed. To provide a completely accurate description of the derivation, the generation and usage of the generated and used entities, respectively, can be provided, so as to make the derivation path, through usage, activity, and generation, explicit. Optional information such as activity, generation, and usage can be linked to derivations to aid analysis of provenance and to facilitate provenance-based reproducibility.

A derivation, written wasDerivedFrom(id; e2, e1, a, g2, u1, attrs) in PROV-N, has:
  • id: an optional identifier for a derivation;
  • generatedEntity: the identifier (e2) of the entity generated by the derivation;
  • usedEntity: the identifier (e1) of the entity used by the derivation;
  • activity: an optional identifier (a) for the activity using and generating the above entities;
  • generation: an optional identifier (g2) for the generation involving the generated entity (e2) and activity;
  • usage: an optional identifier (u1) for the usage involving the used entity (e1) and activity;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this derivation.
Example 29

The following descriptions are about derivations between e2 and e1, but no information is provided as to the identity of the activity (and usage and generation) underpinning the derivation. In the second line, a type attribute is also provided.

wasDerivedFrom(e2, e1)
wasDerivedFrom(e2, e1, [ prov:type="physical transform" ])

The following description expresses that activity a, using the entity e1 according to usage u1, derived the entity e2 and generated it according to generation g2. It is followed by descriptions for generation g2 and usage u1.

wasDerivedFrom(e2, e1, a, g2, u1)
wasGeneratedBy(g2; e2, a, -)
used(u1; a, e1, -)

With such a comprehensive description of derivation, a program that analyzes provenance can identify the activity underpinning the derivation, it can identify how the original entity e1 was used by the activity (e.g. for instance, which argument it was passed as, if the activity is the result of a function invocation), and which output the derived entity e2 was obtained from (say, for a function returning multiple results).

5.2.2 Revision

A revision is a derivation for which the resulting entity is a revised version of some original.

The implication here is that the resulting entity contains substantial content from the original. Revision is a particular case of derivation of an entity into its revised version. The type is of a revision derivation is denoted by: prov:Revision.

Example 30

Revisiting the example of Section 4.2, we can now state that the report tr:WD-prov-dm-20111215 was a revision of the report tr:WD-prov-dm-20111018.

entity(tr:WD-prov-dm-20111215, [ prov:type='rec54:WD'  ])
entity(tr:WD-prov-dm-20111018, [ prov:type='rec54:WD'  ])
wasDerivedFrom(tr:WD-prov-dm-20111215, 
               tr:WD-prov-dm-20111018, 
               [ prov:type='prov:Revision' ])

5.2.3 Quotation

A quotation is the repeat of (some or all of) an entity, such as text or image, by someone who may or may not be its original author.

A quotation relation is a particular case of derivation in which an entity is derived from an original entity by copying, or "quoting", some or all of it. The type is of a quotation derivation is denoted by: prov:Quotation.

Example 31

The following paragraph is a quote from one of the author's blogs.

"During the workshop, it became clear to me that the consensus based models (which are often graphical in nature) can not only be formalized but also be directly connected to these database focused formalizations. I just needed to get over the differences in syntax. This could imply that we could have nice way to trace provenance across systems and through databases and be able to understand the mathematical properties of this interconnection."

If wp:thoughts-from-the-dagstuhl-principles-of-provenance-workshop/ denotes the original blog by agent ex:Paul, and dm:bl-dagstuhl denotes the above paragraph, then the following descriptions express that the above paragraph was copied by agent ex:Luc from a part of the blog, attributed to the agent ex:Paul.

entity(wp:thoughts-from-the-dagstuhl-principles-of-provenance-workshop/)
entity(dm:bl-dagstuhl)
agent(ex:Luc)
agent(ex:Paul)
wasDerivedFrom(dm:bl-dagstuhl,
               wp:thoughts-from-the-dagstuhl-principles-of-provenance-workshop/,
               [ prov:type='prov:Quotation' ])
wasAttributedTo(dm:bl-dagstuhl, ex:Luc)
wasAttributedTo(wp:thoughts-from-the-dagstuhl-principles-of-provenance-workshop/, ex:Paul)

5.2.4 Primary Source

A primary source for a topic refers to something produced by some agent with direct experience and knowledge about the topic, at the time of the topic's study, without benefit from hindsight.

Because of the directness of primary sources, they "speak for themselves" in ways that cannot be captured through the filter of secondary sources. As such, it is important for secondary sources to reference those primary sources from which they were derived, so that their reliability can be investigated.

A primary source relation is a particular case of derivation of secondary materials from their primary sources. It is recognized that the determination of primary sources can be up to interpretation, and should be done according to conventions accepted within the application's domain. The type is of a primary source derivation is denoted by: prov:PrimarySource.

Example 32

Let us consider Charles Joseph Minard's flow map of Napoleon's March in 1812, which was published in 1869. Although the map is not a primary source, Minard probably used the journal of Pierre-Irénée Jacob, pharmacist to Napoleon's army during the Russian campaign. This primary source relation can be encoded as follows.

entity(ex:la-campagne-de-Russie-1812-1813, [ prov:type="map" ])
entity(ex:revue-d-Histoire-de-la-Pharmacie-t-XVIII, [ prov:type="journal" ])
wasDerivedFrom(ex:la-campagne-de-Russie-1812-1813,
               ex:revue-d-Histoire-de-la-Pharmacie-t-XVIII,
               [ prov:type='prov:PrimarySource' ])

5.3 Component 3: Agents, Responsibility, and Influence

The second component of PROV-DM, depicted in Figure 7, is concerned with agents and the notions of Attribution, Association, Delegation, relating agents to entities, activities, and agents, respectively. Core structures are displayed in the yellow area and include three classes and three binary associations. Outside the yellow area, extended structures comprise UML association classes to express expanded n-ary relations, and subclasses Plan, Person, SofwareAgent, and Organization. The subclasses are marked by the UML stereotype "prov:type" to indicate that that these are valid values for the attribute prov:type

agents and responsibilities
Figure 7 ◊: Agents and Responsibility Overview

Component 3 further defines a general notion of influence, as a super-relation of all relations defined so far. Figure 8 displays one new association class, generalizing previously introduced associations.

Influence
Figure 8 ◊: Influence

5.3.1 Agent

An agent is something that bears some form of responsibility for an activity taking place, for the existence of an entity, or for another agent's activity.

An agent, written agent(id, [attr1=val1, ...]) in PROV-N, has:
  • id: an identifier for an agent;
  • attributes: a set of attribute-value pairs ((attr1, val1), ...) representing additional information about this agent.

It is useful to define some basic categories of agents from an interoperability perspective. There are three types of agents that are common across most anticipated domains of use; it is acknowledged that these types do not cover all kinds of agent.

  • SoftwareAgent
    A software agent is running software.

  • Organization
    Agents of type Organization are social or legal institutions such as companies, societies, etc.

  • Person
    Agents of type Person are people.
Example 33

The following expression is about an agent identified by e1, which is a person, named Alice, with employee number 1234.

agent(e1, [ex:employee="1234", ex:name="Alice", prov:type='prov:Person' ])

It is optional to specify the type of an agent. When present, it is expressed using the prov:type attribute.

5.3.2 Attribution

Attribution is the ascribing of an entity to an agent.

When an entity e is attributed to agent ag, entity e was generated by some unspecified activity that in turn was associated to agent ag. Thus, this relation is useful when the activity is not known, or irrelevant.

An attribution relation, written wasAttributedTo(id; e, ag, attrs) in PROV-N, has:
  • id: an optional identifier for the relation;
  • entity: an entity identifier (e);
  • agent: the identifier (ag) of the agent whom the entity is ascribed to, and therefore bears some responsibility for its existence;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this attribution.
Example 34

Revisiting the example of Section 4.1, we can ascribe tr:WD-prov-dm-20111215 to some agents without an explicit activity. The reserved attribute role (see Section 5.7.2.3) allows for role of the agent in the attribution to be specified.

agent(ex:Paolo, [ prov:type='prov:Person' ])
agent(ex:Simon, [ prov:type='prov:Person' ])
entity(tr:WD-prov-dm-20111215, [ prov:type='rec54:WD' ])
wasAttributedTo(tr:WD-prov-dm-20111215, ex:Paolo, [ prov:type="editorship" ])
wasAttributedTo(tr:WD-prov-dm-20111215, ex:Simon, [ prov:type="authorship" ])

5.3.3 Association

An activity association is an assignment of responsibility to an agent for an activity, indicating that the agent had a role in the activity. It further allows for a plan to be specified, which is the plan intended by the agent to achieve some goals in the context of this activity.

A plan is an entity that represents a set of actions or steps intended by one or more agents to achieve some goals.

An activity association, written wasAssociatedWith(id; a, ag, pl, attrs) in PROV-N, has:
  • id: an optional identifier for the association between an activity and an agent;
  • activity: an identifier (a) for the activity;
  • agent: an optional identifier (ag) for the agent associated with the activity;
  • plan: an optional identifier (pl) for the plan adopted by the agent in the context of this activity;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this association of this activity with this agent.

While each of id, agent, plan, and attributes is optional, at least one of them must be present.

Example 35

In the following example, a designer agent and an operator agent are associated with an activity. The designer's goals are achieved by a workflow ex:wf, described as an an entity of type plan.

activity(ex:a, [ prov:type="workflow execution" ])
agent(ex:ag1,  [ prov:type="operator" ])
agent(ex:ag2,  [ prov:type="designer" ])
wasAssociatedWith(ex:a, ex:ag1, -,     [ prov:role="loggedInUser", ex:how="webapp" ])
wasAssociatedWith(ex:a, ex:ag2, ex:wf, [ prov:role="designer", ex:context="project1" ])
entity(ex:wf, [ prov:type='prov:Plan' , 
                ex:label="Workflow 1", 
                prov:location="http://example.org/workflow1.bpel" %% xsd:anyURI ])
Since the workflow ex:wf is itself an entity, its provenance can also be expressed in PROV-DM: it can be generated by some activity and derived from other entities, for instance.
Example 36

In some cases, one wants to indicate a plan was followed, without having to specify which agent was involved.

activity(ex:a, [ prov:type="workflow execution" ])
wasAssociatedWith(ex:a, -, ex:wf)
entity(ex:wf, [ prov:type='prov:Plan', 
                ex:label="Workflow 1", 
                ex:url="http://example.org/workflow1.bpel" %% xsd:anyURI])
In this case, it is assumed that an agent exists, but it has not been specified.

5.3.4 Delegation

Delegation is the assignment of authority and responsibility to an agent (by itself or by another agent) to carry out a specific activity as a delegate or representative, while the agent it acts on behalf of retains some responsibility for the outcome of the delegated work.

For example, a student acted on behalf of his supervisor, who acted on behalf of the department chair, who acted on behalf of the university; all those agents are responsible in some way for the activity that took place but we do not say explicitly who bears responsibility and to what degree.

A delegation link, written actedOnBehalfOf(id; ag2, ag1, a, attrs) in PROV-N, has:
  • id: an optional identifier for the delegation link between delegate and responsible;
  • delegate: an identifier (ag2) for the agent associated with an activity, acting on behalf of the responsible agent;
  • responsible: an identifier (ag1) for the agent, on behalf of which the delegate agent acted;
  • activity: an optional identifier (a) of an activity for which the delegation link holds;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this delegation link.
Example 37

The following fragment describes three agents: a programmer, a researcher, and a funder. The programmer and researcher are associated with a workflow activity. The programmer acts on behalf of the researcher (line-management) encoding the commands specified by the researcher; the researcher acts on behalf of the funder, who has a contractual agreement with the researcher. The terms 'line-management' and 'contract' used in this example are domain specific.

activity(a,[ prov:type="workflow" ])
agent(ag1, [ prov:type="programmer" ])
agent(ag2, [ prov:type="researcher" ])
agent(ag3, [ prov:type="funder" ])
wasAssociatedWith(a, ag1, [ prov:role="loggedInUser" ])
wasAssociatedWith(a, ag2)
wasAssociatedWith(a, ag3)
actedOnBehalfOf(ag1, ag2, a, [ prov:type="line-management" ])
actedOnBehalfOf(ag2, ag3, a, [ prov:type="contract" ])

5.3.5 Influence

Influence is the capacity of an entity, activity, or agent to have an effect on the character, development, or behavior of another by means of usage, start, end, generation, invalidation, communication, derivation, attribution, association, or delegation.

An influence relation between two objects o2 and o1 is a generic dependency of o2 on o1 that signifies some form of influence of o1 on o2.

A Influence relation, written wasInfluencedBy(id; o2, o1, attrs) in PROV-N, has:

  • id: an optional identifier identifying the relation;
  • influencee: an identifier (o2) for an entity, activity, or agent;
  • influencer: an identifier (o1) for an ancestor entity, activity, or agent that the former depends on;
  • attributes: an optional set (attrs) of attribute-value pairs representing additional information about this relation.

Usage, start, end, generation, invalidation, communication, derivation, attribution, association, and delegation are particular cases of influence. It is recommended to adopt these more specific relations when writing provenance descriptions. It is anticipated that the Influence relation may be useful to express queries over provenance information.

Example 38

We refer to the example of Section 4.2, and specifically to Figure 3. We could have expressed that the influence of w3:Consortium on tr:WD-prov-dm-20111215.

 wasInfluencedBy(tr:WD-prov-dm-20111215, w3:Consortium)
Instead, it is recommended to express the more specific description:
 wasAttributedTo(tr:WD-prov-dm-20111215, w3:Consortium)

5.4 Component 4: Bundles

The fourth component of PROV-DM is concerned with bundles, a mechanism to support provenance of provenance. Figure 9 depicts a UML class diagram for the fourth component. It comprises a Bundle class defined as a subclass of Entity.

bundles
Figure 9 ◊: Figure 9: Bundle Component Overview

5.4.1 Bundle constructor

A bundle is a named set of provenance descriptions, and is itself an entity, so allowing provenance of provenance to be expressed.

A bundle constructor allows the content and the name of a bundle to be specified; it is written bundle id description_1 ... description_n endBundle and consists of:
  • id: an identifier for the bundle;
  • descriptions: a set of provenance descriptions description_1, ..., description_n.

A bundle's identifier id identifies a unique set of descriptions.

There may be other kinds of bundles not directly expressible by this constructor, such as provenance descriptions handwritten on a letter or a whiteboard, etc. Whatever the means by which bundles are expressed, all can be described, as in the following section.

5.4.2 Bundle Type

A bundle is a named set of descriptions, but it is also an entity so that its provenance can be described.

PROV defines the following type for bundles:
  • prov:Bundle is the type that denotes bundles.

A bundle description is of the form entity(id,[prov:type='prov:Bundle', attr1=val1, ...]) where id is an identifier denoting a bundle, a type prov:Bundle and an optional set of attribute-value pairs ((attr1, val1), ...) representing additional information about this bundle.

The provenance of provenance can then be described using PROV constructs, as illustrated by Example 39 and Example 40.

Example 39

Let us consider two entities ex:report1 and ex:report2.

 
entity(ex:report1, [ prov:type="report", ex:version=1 ])
wasGeneratedBy(ex:report1, -, 2012-05-24T10:00:01)
entity(ex:report2, [ prov:type="report", ex:version=2])
wasGeneratedBy(ex:report2, -, 2012-05-25T11:00:01)
wasDerivedFrom(ex:report2, ex:report1)

Let us assume that Bob observed the creation of ex:report1. A first bundle can be expressed.

 
bundle bob:bundle1
  entity(ex:report1, [ prov:type="report", ex:version=1 ])
  wasGeneratedBy(ex:report1, -, 2012-05-24T10:00:01)
endBundle

In contrast, Alice observed the creation of ex:report2 and its derivation from ex:report1. A separate bundle can also be expressed.

 
bundle alice:bundle2
  entity(ex:report1)
  entity(ex:report2, [ prov:type="report", ex:version=2 ])
  wasGeneratedBy(ex:report2, -, 2012-05-25T11:00:01)
  wasDerivedFrom(ex:report2, ex:report1)
endBundle

The first bundle contains the descriptions corresponding to Bob observing the creation of ex:report1. Its provenance can be described as follows.

 
entity(bob:bundle1, [prov:type='prov:Bundle'])
wasGeneratedBy(bob:bundle1, -, 2012-05-24T10:30:00)
wasAttributedTo(bob:bundle1, ex:Bob)

In contrast, the second bundle is attributed to Alice who observed the derivation of ex:report2 from ex:report1.

 
entity(alice:bundle2, [ prov:type='prov:Bundle' ])
wasGeneratedBy(alice:bundle2, -, 2012-05-25T11:15:00)
wasAttributedTo(alice:bundle2, ex:Alice)
Example 40

A provenance aggregator could merge two bundles, resulting in a novel bundle, whose provenance is described as follows.

 
bundle agg:bundle3
  entity(ex:report1, [ prov:type="report", ex:version=1 ])
  wasGeneratedBy(ex:report1, -, 2012-05-24T10:00:01)

  entity(ex:report2, [ prov:type="report", ex:version=2 ])
  wasGeneratedBy(ex:report2, -, 2012-05-25T11:00:01)
  wasDerivedFrom(ex:report2, ex:report1)
endBundle

entity(agg:bundle3, [ prov:type='prov:Bundle' ])
agent(ex:aggregator01, [ prov:type='ex:Aggregator' ])
wasAttributedTo(agg:bundle3, ex:aggregator01)
wasDerivedFrom(agg:bundle3, bob:bundle1)
wasDerivedFrom(agg:bundle3, alice:bundle2)

The new bundle is given a new identifier agg:bundle3 and is attributed to the ex:aggregator01 agent.

5.5 Component 5: Alternate Entities

The fifth component of PROV-DM is concerned with relations specialization, alternate, and mention between entities. Figure 10 depicts the fifth component with a single class, two binary associations, and a ternary association.

alternates
Figure 10 ◊: Figure 10: Alternates Component Overview

Two provenance descriptions about the same thing may emphasize differents aspects of that thing.

Example 41

User Alice writes an article. In its provenance, she wishes to refer to the precise version of the article with a date-specific IRI, as she might edit the article later. Alternatively, user Bob refers to the article in general, independently of its variants over time.

The PROV data model introduces relations, called specialization, alternate, and mention that allow entities to be linked together. They are defined as follows.

5.5.1 Specialization

An entity that is a specialization of another shares all aspects of the latter, and additionally presents more specific aspects of the same thing as the latter. In particular, the lifetime of the entity being specialized contains that of any specialization.

Examples of aspects include a time period, an abstraction, and a context associated with the entity.

A specialization relation, written specializationOf(infra, supra) in PROV-N, has:
  • specificEntity: an identifier (infra) of the entity that is a specialization of the general entity (supra);
  • generalEntity: an identifier (supra) of the entity that is being specialized.
Example 42

The BBC news home page on 2012-03-23 ex:bbcNews2012-03-23 is a specialization of the BBC news page in general bbc:news/. This can be expressed as follows.

specializationOf(ex:bbcNews2012-03-23, bbc:news/)
We have created a new qualified name, ex:bbcNews2012-03-23, in the namespace ex, to identify the specific page carrying this day's news, which would otherwise be the generic bbc:news/ page.

5.5.2 Alternate

Two alternate entities present aspects of the same thing. These aspects may be the same or different, and the alternate entities may or may not overlap in time.

An alternate relation, written alternateOf(e1, e2) in PROV-N, has:
  • alternate1: an identifier (e1) of the first of the two entities;
  • alternate2: an identifier (e2) of the second of the two entities.
Example 43

A given news item on the BBC News site bbc:news/science-environment-17526723 for desktop is an alternate of a bbc:news/mobile/science-environment-17526723 for mobile devices.

entity(bbc:news/science-environment-17526723, 
       [ prov:type="a news item for desktop"])
entity(bbc:news/mobile/science-environment-17526723, 
       [ prov:type="a news item for mobile devices"])
alternateOf(bbc:news/science-environment-17526723, 
            bbc:news/mobile/science-environment-17526723)
Example 44

Considering again the two versions of the technical report tr:WD-prov-dm-20111215 (second working draft) and tr:WD-prov-dm-20111018 (first working draft). They are alternate of each other.

entity(tr:WD-prov-dm-20111018)
entity(tr:WD-prov-dm-20111215)
alternateOf(tr:WD-prov-dm-20111018,tr:WD-prov-dm-20111215)

They are both specialization of the page http://www.w3.org/TR/prov-dm/.

5.5.3 Mention

This feature is "at risk" and may be removed from this specification based on feedback. Please send feedback to public-prov-comments@w3.org.

The "Mention" construct might be removed from PROV if implementation experience reveals problems with supporting this construct.

An entity e1 may be mentioned in a bundle b, which contains some descriptions about this entity e1: how e1 was generated and used, which activities e1 is involved with, the agents e1 is attributed to, etc. Other bundles may contain other descriptions about the same entity e1. Some applications may want to interpret this entity e1 with respect to the descriptions found in the bundle b it occurs in. To this end, PROV allows a new entity e2 to be created, which is a specialization of the original entity e1, and which presents an additional aspect: the bundle b containing some descriptions of e1. With this relation, applications that process e2 can know that the attributes of e2 may have been computed according to the descriptions of e1 in b.

Thus, the following notion is a relation between two entities with regard to a bundle. It is a special case of specialization.

The mention of an entity in a bundle (containing a description of this entity) is another entity that is a specialization of the former and that presents the bundle as a further additional aspect.

An entity is interpreted with respect to a bundle's description in a domain specific manner. The mention of this entity with respect to this bundle offers the opportunity to specialize it according to some domain-specific interpretation.

A mention of an entity in a bundle results in a specialization of this entity with extra fixed aspects, including the bundle that it is described in.

A mention relation, written mentionOf(infra, supra, b) in PROV-N, has:
  • specificEntity: an identifier (infra) of the entity that is a mention of the general entity (supra);
  • generalEntity: an identifier (supra) of the entity that is being mentioned.
  • bundle: an identifier (b) of a bundle that contains a description of supra and further constitutes one additional aspect presented by infra.
Example 45

This example is concerned with a performance rating tool that reads and processes provenance to determine the performance of agents. To keep the example simple, an agent's performance is determined by the duration of the activities it is associated with.

As an illustration, we consider that two bundles ex:run1 and ex:run2 refer to an agent ex:Bob that controlled two activities ex:a1 and ex:a2.

bundle ex:run1
    activity(ex:a1, 2011-11-16T16:00:00, 2011-11-16T17:00:00)  //duration: 1hour
    wasAssociatedWith(ex:a1, ex:Bob, [prov:role="controller"])
endBundle

bundle ex:run2
    activity(ex:a2, 2011-11-17T10:00:00, 2011-11-17T17:00:00)  //duration: 7hours
    wasAssociatedWith(ex:a2, ex:Bob, [prov:role="controller"])
endBundle

The performance rating tool reads these bundles, and rates the performance of the agent described in these bundles. The performance rating tool creates a new bundle tool:analysis01 containing the following. A new agent tool:Bob-2011-11-16 is declared as a mention of ex:Bob as described in bundle ex:run1, and likewise for tool:Bob-2011-11-17 with respect to ex:run2. The tool adds a domain-specific performance attribute to each of these specialized entities as follows: the performance of the agent in the first bundle is judged to be good since the duration of ex:a1 is one hour, whereas it is judged to be bad in the second bundle since ex:a2's duration is seven hours.

bundle tool:analysis01
    agent(tool:Bob-2011-11-16, [perf:rating="good"])
    mentionOf(tool:Bob-2011-11-16, ex:Bob, ex:run1)

    agent(tool:Bob-2011-11-17, [perf:rating="bad"])
    mentionOf(tool:Bob-2011-11-17, ex:Bob, ex:run2)
endBundle
Example 46

Consider the following bundle of descriptions, in which derivation and generations have been identified.

 
bundle obs:bundle1
  entity(ex:report1, [prov:type="report", ex:version=1])
  wasGeneratedBy(ex:g1; ex:report1,-,2012-05-24T10:00:01)
  entity(ex:report2, [prov:type="report", ex:version=2])
  wasGeneratedBy(ex:g2; ex:report2,-,2012-05-25T11:00:01)
  wasDerivedFrom(ex:report2, ex:report1)
endBundle
entity(obs:bundle1, [ prov:type='prov:Bundle' ])
wasAttributedTo(obs:bundle1, ex:observer01)
Bundle obs:bundle1 is rendered by a visualisation tool. It may useful for the visualization layout of this bundle to be shared along with the provenance descriptions, so that other users can render provenance as it was originally rendered. The original bundle obviously cannot be changed. However, one can create a new bundle, as follows.
 
bundle tool:bundle2
  entity(tool:bundle2, [ prov:type='viz:Configuration', prov:type='prov:Bundle' ])
  wasAttributedTo(tool:bundle2, viz:Visualizer)

  entity(tool:report1, [viz:color="orange"])
  mentionOf(tool:report1, ex:report1, obs:bundle1)

  entity(tool:report2, [viz:color="blue"])              
  mentionOf(tool:report2, ex:report2, obs:bundle1)
endBundle

In bundle tool:bundle2, the prefix viz is used for naming visualisation-specific attributes, types or values.

Bundle tool:bundle2 is given type viz:Configuration to indicate that it consists of descriptions that pertain to the configuration of the visualisation tool. This type attribute can be used for searching bundles containing visualization-related descriptions.

The visualisation tool created new identifiers tool:report1 and tool:report2. They denote entities which are specializations of ex:report1 and ex:report2, described in bundle obs:bundle1, with visualization attribute for the color to be used when rendering these entities.

5.6 Component 6: Collections

The sixth component of PROV-DM is concerned with the notion of collections. A collection is an entity that has some members. The members are themselves entities, and therefore their provenance can be expressed. Some applications need to be able to express the provenance of the collection itself: e.g. who maintains the collection (attribution), which members it contains as it evolves, and how it was assembled. The purpose of Component 6 is to define the types and relations that are useful to express the provenance of collections.

Figure 11 depicts the sixth component with two new classes (Collection, Empty Collection) and one association (HadMember).

collection
Figure 11 ◊: Figure 11: Collections Component Overview

5.6.1 Collection

A collection is an entity that provides a structure to some constituents, which are themselves entities. These constituents are said to be member of the collections. An empty collection is a collection without members.

PROV-DM defines the following types related to collections:

  • prov:Collection denotes an entity of type Collection, i.e. an entity that can participate in relations amongst collections;
  • prov:EmptyCollection denotes an empty collection.
Example 47
entity(c0, [prov:type='prov:EmptyCollection' ])  // c0 is an empty collection
entity(c1, [prov:type='prov:Collection'  ])      // c1 is a collection, with unknown content

5.6.2 Membership

A membership relation is defined, to allow stating the members of a Collection.

Membership is the belonging of an entity to a collection.

A membership relation, written hadMember(c, e), has:
  • collection: an identifier (c) for the collection whose member is asserted;
  • entity: the identifier e of an entity that is member of the collection.
Example 48

In this example, c is a collection known to have e0, e1, and e2 as members, and may have other members.

entity(e0)
entity(e1)
entity(e2)

entity(c, [prov:type='prov:Collection'  ])      // c is a collection, with unknown content
hadMember(c, e0)
hadMember(c, e1)
hadMember(c, e2)

5.7 Further Elements of PROV-DM

This section introduces further elements of PROV-DM.

5.7.1 Identifier

An identifier is a qualified name.

5.7.2 Attribute

An attribute is a qualified name.

The PROV data model introduces a pre-defined set of attributes in the PROV namespace, which we define below. This specification does not provide any interpretation for any attribute declared in any other namespace.

5.7.2.1 prov:label

The attribute prov:label provides a human-readable representation of an instance of a PROV-DM type or relation. The value associated with the attribute prov:label must be a string.

Example 49

The following entity is provided with a label attribute.

 entity(ex:e1, [ prov:label="This is a human-readable label" ])

The following entity has two label attributes, in French and English.

 entity(ex:car01, [ prov:label="Voiture 01"@fr, prov:label="Car 01"@en ])
5.7.2.2 prov:location

A location can be an identifiable geographic place (ISO 19112), but it can also be a non-geographic place such as a directory, row, or column. As such, there are numerous ways in which location can be expressed, such as by a coordinate, address, landmark, and so forth. This document does not specify how to concretely express locations, but instead provide a mechanism to introduce locations, by means of a reserved attribute.

The attribute prov:location is an optional attribute of Entity, Activity, Agent, Usage, Generation, Invalidation, Start, and End. The value associated with the attribute prov:location must be a PROV-DM Value, expected to denote a location.

Example 50

The following expression describes entity Mona Lisa, a painting, with a location attribute.

 entity(ex:MonaLisa, [ prov:location="Le Louvre, Paris", prov:type="StillImage" ])

The following expression describes a cell, at coordinates (5,5), with value 10.

 entity(ex:cell, [ prov:location="(5,5)", prov:value="10" %% xsd:integer ])
5.7.2.3 prov:role

A role is the function of an entity or agent with respect to an activity, in the context of a usage, generation, invalidation, association, start, and end.

The attribute prov:role is allowed to occur multiple times in a list of attribute-value pairs. The value associated with a prov:role attribute must be a PROV-DM Value.

Example 51

The following activity is associated with an agent acting as the operator.

 wasAssociatedWith(a, ag, [ prov:role="operator" ])

In the following expression, the activity ex:div01 used entity ex:cell in the role of divisor.

used(ex:div01, ex:cell, [ prov:role="divisor" ])
5.7.2.4 prov:type

The attribute prov:type provides further typing information for any construct with an optional set of attribute-value pairs.

PROV-DM liberally defines a type as a category of things having common characteristics. PROV-DM is agnostic about the representation of types, and only states that the value associated with a prov:type attribute must be a PROV-DM Value. The attribute prov:type is allowed to occur multiple times.

Example 52

The following describes an agent of type software agent.

   agent(ag, [ prov:type='prov:SoftwareAgent' ])

The following types are pre-defined in PROV, and are valid values for the prov:type attribute.

Table 7 ◊: PROV-DM Predefined Types
TypeSpecificationCore concept
prov:BundleSection 5.4.1Entity
prov:CollectionSection 5.6.1Entity
prov:EmptyCollectionSection 5.6.1Entity
prov:OrganizationSection 5.3.1Agent
prov:PersonSection 5.3.1Agent
prov:Plan Section 5.1.1Entity
prov:PrimarySourceSection 5.2.4Derivation
prov:QuotationSection 5.2.3Derivation
prov:RevisionSection 5.2.2Derivation
prov:SoftwareAgentSection 5.3.1Agent
5.7.2.5 prov:value

The attribute prov:value provides a Value for an entity.

The attribute prov:value is an optional attribute of entity. The value associated with the attribute prov:value must be a PROV-DM Value. The attribute prov:value may occur at most once in a set of attribute-value pairs.

Example 53

The following example illustrates the provenance of the number 4 obtained by an activity that computed the length of an input string "abcd". The input and the output are expressed as entities ex:in and ex:out, respectively. They each have a prov:value attribute associated with the corresponding value.

entity(ex:in, [ prov:value="abcd" ]) 
entity(ex:out, [ prov:value=4 ]) 
activity(ex:len, [ prov:type="string-length" ])
used(ex:len, ex:in)
wasGeneratedBy(ex:out, ex:len)
wasDerivedFrom(ex:out, ex:in)

5.7.3 Value

A value is a constant such as a string, number, time, qualified name, IRI, and encoded binary data, whose interpretation is outside the scope of PROV. Values can occur in attribute-value pairs.

Each kind of such values is called a datatype. Use of the following data types is recommended.

  • The RDF-compatible [RDF-CONCEPTS] types, including those taken from the set of XML Schema Datatypes [XMLSCHEMA11-2];
  • Qualified names introduced in this specification.

The normative definitions of these datatypes are provided by their respective specifications.

Conformance to RDF Datatypes As of the publication of this document, RDF 1.1 Concepts and Abstract Syntax [RDF-CONCEPTS11] is not yet a W3C Recommendation (see http://www.w3.org/TR/rdf11-concepts/ for the latest version). Both the PROV Working Group and the RDF Working Group are confident that there will be only minor changes before it becomes a W3C Recommendation. In order to take advantage of the anticipated corrections and new features sooner, while also providing stability in case the specification does not advance as expected, conformance to PROV as it relates to RDF Datatypes is defined as follows:

  • If RDF 1.1 Concepts and Abstract Syntax becomes a W3C Recommendation, all references in PROV to RDF Concepts and Abstract Syntax will be normative references to the 1.1 Recommendation.
  • Until that time, references in PROV to RDF Concepts and Abstract Syntax features operate as follows:
    • If RDF 1.0 defines the features, then the reference is normative to the 1.0 definition [RDF-CONCEPTS];
    • otherwise, the feature is optional in PROV and the reference is informative only.

This "change in normative reference" is effective as of the publication of RDF 1.1 as a W3C Recommendation. However, W3C expects to publish a new edition of PROV once RDF 1.1 becomes a Recommendation to update the reference explicitly.

Example 54

The following examples respectively are the string "abc", the integer number 1, and the IRI "http://example.org/foo".

  "abc"
  "1" %% xsd:integer
  "http://example.org/foo" %% xsd:anyURI

The following example shows a value of type prov:QUALIFIED_NAME (see prov:QUALIFIED_NAME [PROV-N]). The prefix ex must be bound to a namespace declared in a namespace declaration.

 
  "ex:value" %% prov:QUALIFIED_NAME
Alternatively, the same value can be expressed using the following convenience notation.
 
  'ex:value'

We note that PROV-DM time instants are defined according to xsd:dateTime [XMLSCHEMA11-2].

Example 55

In the following example, the generation time of entity e1 is expressed according to xsd:dateTime [XMLSCHEMA11-2].

 
  wasGeneratedBy(e1,a1, 2001-10-26T21:32:52)

5.7.4 Namespace Declaration

A PROV-DM namespace is identified by an IRI [IRI]. In PROV-DM, attributes, identifiers, and values with qualified names as data type can be placed in a namespace using the mechanisms described in this specification.

A namespace declaration consists of a binding between a prefix and a namespace. Every qualified name with this prefix in the scope of this declaration refers to this namespace.

A default namespace declaration consists of a namespace. Every un-prefixed qualified name refers to default namespace declaration.

The PROV namespace is identified by the URI http://www.w3.org/ns/prov#.

5.7.5 Qualified Name

A qualified name is a name subject to namespace interpretation. It consists of a namespace, denoted by an optional prefix, and a local name.

PROV-DM stipulates that a qualified name can be mapped into an IRI by concatenating the IRI associated with the prefix and the local part.

A qualified name's prefix is optional. If a prefix occurs in a qualified name, it refers to a namespace declared in a namespace declaration. In the absence of prefix, the qualified name refers to the default namespace.

6. PROV-DM Extensibility Points

The PROV data model provides extensibility points that allow designers to specialize it for specific applications or domains. We summarize these extensibility points here.

The PROV namespace declares a set of reserved attributes catering for extensibility: prov:type, prov:role, prov:location.

The PROV data model is designed to be application and technology independent, but implementers are welcome and encouraged to specialize PROV-DM to specific domains and applications. To ensure interoperability, specializations of the PROV data model that exploit the extensibility points summarized in this section must preserve the semantics specified in this document and in [PROV-CONSTRAINTS].

7. Creating Valid Provenance

A. Cross-References to PROV-O and PROV-N

PROV-DM is a conceptual data model which can be serialized in various ways. The following table contains the PROV-O classes and properties, as described in [PROV-O], and PROV-N productions, as described in [PROV-N] that correspond to PROV-DM concepts.

Table 8 ◊: Cross-References to PROV-O and PROV-N
PROV-DMPROV-OPROV-NComponent
Entity Entity entityExpression Component 1:
Entities/Activities
Activity Activity activityExpression
Generation wasGeneratedBy, Generation generationExpression
Usage used, Usage usageExpression
Communication wasInformedBy, Communication communicationExpression
Start wasStartedBy, Start startExpression
End wasEndedBy, End endExpression
Invalidation wasInvalidatedBy, Invalidation invalidationExpression
Derivation wasDerivedFrom, Derivation derivationExpression Component 2:
Derivations
Revision wasRevisionOf, Revision type Revision
Quotation wasQuotedFrom, Quotation type Quotation
Primary Source hadPrimarySource, Source type PrimarySource
Agent Agent agentExpression Component 3:
Agents, Responsibility,
Influence
Attribution wasAttributedTo, Attribution attributionExpression
Association wasAssociatedWith, Association associationExpression
Delegation actedOnBehalfOf, Delegation delegationExpression
Plan Plan type Plan
Person Person type Person
Organization Organization type Organization
SoftwareAgent SoftwareAgent type SoftwareAgent
Influence wasInfluencedBy, Influence influenceExpression
Bundle constructor bundle description namedBundle Component 4:
Bundles
Bundle type Bundle type Bundle
Alternate alternateOf alternateExpression Component 5:
Alternate
Specialization specializationOf specializationExpression
Mention mentionOf, asInBundle mentionExpression
Collection Collection type Collection Component 6:
Collections
EmptyCollection EmptyCollection type EmptyCollection
Membership hadMember membershipExpression

B. Acknowledgements

This document has been produced by the PROV Working Group, and its contents reflect extensive discussion within the Working Group as a whole. The editors extend special thanks to Sandro Hawke (W3C/MIT), Ivan Herman (W3C/ERCIM), Tom Baker for their thorough reviews.

Members of the PROV Working Group at the time of publication of this document were: Ilkay Altintas (Invited expert), Reza B'Far (Oracle Corporation), Khalid Belhajjame (University of Manchester), James Cheney (University of Edinburgh, School of Informatics), Sam Coppens (IBBT), David Corsar (University of Aberdeen, Computing Science), Stephen Cresswell (The National Archives), Tom De Nies (IBBT), Helena Deus (DERI Galway at the National University of Ireland, Galway, Ireland), Simon Dobson (Invited expert), Martin Doerr (Foundation for Research and Technology - Hellas(FORTH)), Kai Eckert (Invited expert), Jean-Pierre EVAIN (European Broadcasting Union, EBU-UER), James Frew (Invited expert), Irini Fundulaki (Foundation for Research and Technology - Hellas(FORTH)), Daniel Garijo (Universidad Politécnica de Madrid), Yolanda Gil (Invited expert), Ryan Golden (Oracle Corporation), Paul Groth (Vrije Universiteit), Olaf Hartig (Invited expert), David Hau (National Cancer Institute, NCI), Sandro Hawke (W3C/MIT), Jörn Hees (German Research Center for Artificial Intelligence (DFKI) Gmbh), Ivan Herman, (W3C/ERCIM), Ralph Hodgson (TopQuadrant), Hook Hua (Invited expert), Trung Dong Huynh (University of Southampton), Graham Klyne (University of Oxford), Michael Lang (Revelytix, Inc.), Timothy Lebo (Rensselaer Polytechnic Institute), James McCusker (Rensselaer Polytechnic Institute), Deborah McGuinness (Rensselaer Polytechnic Institute), Simon Miles (Invited expert), Paolo Missier (School of Computing Science, Newcastle university), Luc Moreau (University of Southampton), James Myers (Rensselaer Polytechnic Institute), Vinh Nguyen (Wright State University), Edoardo Pignotti (University of Aberdeen, Computing Science), Paulo da Silva Pinheiro (Rensselaer Polytechnic Institute), Carl Reed (Open Geospatial Consortium), Adam Retter (Invited Expert), Christine Runnegar (Invited expert), Satya Sahoo (Invited expert), David Schaengold (Revelytix, Inc.), Daniel Schutzer (FSTC, Financial Services Technology Consortium), Yogesh Simmhan (Invited expert), Stian Soiland-Reyes (University of Manchester), Eric Stephan (Pacific Northwest National Laboratory), Linda Stewart (The National Archives), Ed Summers (Library of Congress), Maria Theodoridou (Foundation for Research and Technology - Hellas(FORTH)), Ted Thibodeau (OpenLink Software Inc.), Curt Tilmes (National Aeronautics and Space Administration), Craig Trim (IBM Corporation), Stephan Zednik (Rensselaer Polytechnic Institute), Jun Zhao (University of Oxford), Yuting Zhao (University of Aberdeen, Computing Science).

C. References

C.1 Normative references

[IRI]
M. Duerst, M. Suignard. Internationalized Resource Identifiers (IRI). January 2005. Internet RFC 3987. URL: http://www.ietf.org/rfc/rfc3987.txt
[RDF-CONCEPTS]
Graham Klyne; Jeremy J. Carroll. Resource Description Framework (RDF): Concepts and Abstract Syntax. 10 February 2004. W3C Recommendation. URL: http://www.w3.org/TR/2004/REC-rdf-concepts-20040210
[RFC2119]
S. Bradner. Key words for use in RFCs to Indicate Requirement Levels. March 1997. Internet RFC 2119. URL: http://www.ietf.org/rfc/rfc2119.txt
[UML]
Object Management Group Unified Modeling Language: Superstructure. version 2.0, 2005 URL: http://www.omg.org/spec/UML/2.0/Superstructure/PDF/
[URI]
T. Berners-Lee; R. Fielding; L. Masinter. Uniform Resource Identifiers (URI): generic syntax. January 2005. Internet RFC 3986. URL: http://www.ietf.org/rfc/rfc3986.txt
[XMLSCHEMA11-2]
Henry S. Thompson; et al. W3C XML Schema Definition Language (XSD) 1.1 Part 2: Datatypes. 5 April 2012. W3C Recommendation URL: http://www.w3.org/TR/2012/REC-xmlschema11-2-20120405/

C.2 Informative references

[Logic]
W. E. Johnson Logic: Part III.1924. URL: http://www.ditext.com/johnson/intro-3.html
[Mappings]
Satya Sahoo and Paul Groth and Olaf Hartig and Simon Miles and Sam Coppens and James Myers and Yolanda Gil and Luc Moreau and Jun Zhao and Michael Panzer and Daniel Garijo Provenance Vocabulary Mappings. August 2010 URL: http://www.w3.org/2005/Incubator/prov/wiki/Provenance_Vocabulary_Mappings
[PROV-AQ]
Graham Klyne and Paul Groth (eds.) Luc Moreau, Olaf Hartig, Yogesh Simmhan, James Meyers, Timothy Lebo, Khalid Belhajjame, and Simon Miles Provenance Access and Query. 2011, Working Draft. URL: http://www.w3.org/TR/prov-aq/
[PROV-CONSTRAINTS]
James Cheney, Paolo Missier, and Luc Moreau (eds.) Constraints of the PROV Data Model. 2011, Working Draft. URL: http://www.w3.org/TR/prov-constraints/
[PROV-N]
Luc Moreau and Paolo Missier (eds.) James Cheney, Stian Soiland-Reyes PROV-N: The Provenance Notation. 2011, Working Draft. URL: http://www.w3.org/TR/prov-n/
[PROV-O]
Timothy Lebo, Satya Sahoo and Deborah McGuinness (eds.) Khalid Belhajjame, James Cheney, David Corsar, Daniel Garijo, Stian Soiland-Reyes, and Stephan Zednik Provenance Formal Model. 2011, Working Draft. URL: http://www.w3.org/TR/prov-o/
[PROV-PRIMER]
Yolanda Gil and Simon Miles (eds.) Khalid Belhajjame, Helena Deus, Daniel Garijo, Graham Klyne, Paolo Missier, Stian Soiland-Reyes, and Stephan Zednik Prov Model Primer. 2011, Working Draft. URL: http://www.w3.org/TR/prov-primer/
[RDF-CONCEPTS11]
Richard Cyganiak and David Wood (eds.) RDF 1.1 Concepts and Abstract Syntax RDF 1.1 Concepts and Abstract Syntax. URL: http://www.w3.org/TR/rdf11-concepts/