W3C Web Services Description Language (WSDL) Version 2.0 Part 2: Adjuncts W3C Candidate Recommendation 6 January 2006 This version: http://www.w3.org/TR/2006/CR-wsdl20-adjuncts-20060106 Latest version: http://www.w3.org/TR/wsdl20-adjuncts Previous versions: http://www.w3.org/TR/2005/WD-wsdl20-adjuncts-20050803 Editors: Roberto Chinnici, Sun Microsystems Hugo Haas, W3C Amelia A. Lewis, TIBCO Software Jean-Jacques Moreau, Canon David Orchard, BEA Systems Sanjiva Weerawarana, WSO2 This document is also available in these non-normative formats: PDF, PostScript , XML, and plain text. Copyright © 2006 W3C^® (MIT, ERCIM, Keio), All Rights Reserved. W3C liability, trademark and document use rules apply. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Abstract WSDL is an XML format for describing network services as a set of endpoints operating on messages containing either document-oriented or procedure-oriented information. Web Services Description Language (WSDL) Version 2.0 Part 2: Adjuncts defines predefined extensions for use in WSDL 2.0: • Message exchange patterns • Operation styles • Binding Extensions This specification depends on WSDL Version 2.0 [WSDL 2.0 Core Language]. Status of this Document This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/. This is the W3C Candidate Recommendation of Web Services Description Language (WSDL) Version 2.0 Part 2: Adjuncts for review by W3C Members and other interested parties. It has been produced by the Web Services Description Working Group, which is part of the W3C Web Services Activity. The publication of this document signifies a call for implementations of this specification. This specification will remain a Candidate Recommendation at least until 15 March 2006. This Working Draft addresses all the comments received during the second Last Call review period on the WSDL 2.0 drafts. The detailed disposition of the comments received can be found in the Last Call issues list. A diff-marked version against the previous version of this document is available. For a detailed list of changes since the last publication of this document, please refer to appendix C. Part 2 Change Log. The Working Group plans to submit this specification for consideration as a W3C Proposed Recommendation if the following exit criteria have been met: • Two interoperable implementations of all the features, both mandatory and optional, of the specifications have been produced. • The Working Group releases a test suite along with an implementation report . The following features defined in this specification are considered at risk: • Serialization of the instance data in parts of the HTTP request IRI (section 6.8.1 Serialization of the instance data in parts of the HTTP request IRI): feedback is sought on this topic • Definition of the Robust In-Only, In-Optional-Out, Out-Only, Robust Out-Only, Out-In, Out-Optional-In message exchange pattern (in section 2.3 Message Exchange Patterns): the Working Group is intending to remove those definitions from the specification if it does not have evidence of their use Implementers are encouraged to provide feedback by 15 March 2006. Comments on this document are to be sent to the public public-ws-desc-comments@w3.org mailing list (public archive). Issues about this document are recorded in the Candidate Recommendation issues list maintained by the Working Group. A list of formal objections against the set of WSDL 2.0 Working Drafts is also available. Publication as a Candidate Recommendation does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress. This document has been produced under the 24 January 2002 Current Patent Practice as amended by the W3C Patent Policy Transition Procedure. Patent disclosures relevant to this specification may be found on the Working Group's patent disclosure page. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) with respect to this specification should disclose the information in accordance with section 6 of the W3C Patent Policy. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Short Table of Contents 1. Introduction 2. Predefined Message Exchange Patterns 3. Predefined Extensions 4. Predefined Operation Styles 5. WSDL SOAP Binding Extension 6. WSDL HTTP Binding Extension 7. References A. Acknowledgements (Non-Normative) B. Component Summary (Non-Normative) C. Part 2 Change Log (Non-Normative) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Table of Contents 1. Introduction 1.1 Notational Conventions 2. Predefined Message Exchange Patterns 2.1 Template for Message Exchange Patterns 2.1.1 Pattern Name 2.2 Fault Propagation Rules 2.2.1 Fault Replaces Message 2.2.2 Message Triggers Fault 2.2.3 No Faults 2.3 Message Exchange Patterns 2.3.1 In-Only 2.3.2 Robust In-Only 2.3.3 In-Out 2.3.4 In-Optional-Out 2.3.5 Out-Only 2.3.6 Robust Out-Only 2.3.7 Out-In 2.3.8 Out-Optional-In 2.4 Security Considerations 3. Predefined Extensions 3.1 Operation safety 3.1.1 Relationship to WSDL Component Model 3.1.2 XML Representation 3.1.3 Mapping from XML Representation to Component Properties 4. Predefined Operation Styles 4.1 RPC Style 4.1.1 wrpc:signature Extension 4.1.2 XML Representation of the wrpc:signature Extension 4.1.3 wrpc:signature Extension Mapping To Properties of an Interface Operation component 4.2 IRI Style 4.3 Multipart style 5. WSDL SOAP Binding Extension 5.1 XML Syntax Summary (Non-Normative) 5.2 Identifying the use of the SOAP Binding 5.3 SOAP Binding Rules 5.4 Specifying the SOAP Version 5.4.1 Description 5.4.2 Relationship to WSDL Component Model 5.4.3 XML Representation 5.4.4 Mapping from XML Representation to Component properties 5.5 Specifying the SOAP Underlying Protocol 5.5.1 Description 5.5.2 Relationship to WSDL Component Model 5.5.3 XML Representation 5.5.4 Mapping from XML Representation to Component Properties 5.6 Binding Faults 5.6.1 Description 5.6.2 Relationship to WSDL Component Model 5.6.3 XML Representation 5.6.4 Mapping XML Representation to Component Properties 5.7 Binding Operations 5.7.1 Description 5.7.2 Relationship to WSDL Component Model 5.7.3 XML Representation 5.7.4 Mapping from XML Representation to Component Properties 5.8 Declaring SOAP Modules 5.8.1 Description 5.8.2 Relationship to WSDL Component Model 5.8.3 SOAP Module component 5.8.4 XML Representation 5.8.5 Mapping from XML Representation to Component Properties 5.8.6 IRI Identification Of A SOAP Module component 5.9 Declaring SOAP Header Blocks 5.9.1 Description 5.9.2 Relationship to WSDL Component Model 5.9.3 SOAP Header Block component 5.9.4 XML Representation 5.9.5 Mapping XML Representation to Component Properties 5.9.6 IRI Identification Of A SOAP Header Block component 5.10 WSDL SOAP 1.2 Binding 5.10.1 Identifying a WSDL SOAP 1.2 Binding 5.10.2 Description 5.10.3 SOAP 1.2 Binding Rules 5.10.4 Binding WSDL 2.0 MEPs to SOAP 1.2 MEPs 5.10.4.1 Using SOAP Request-Response 5.10.4.1.1 The Client 5.10.4.1.2 The Service 5.10.4.2 Using SOAP-Response 5.10.4.2.1 The Client 5.10.4.2.2 The Service 5.11 Conformance 6. WSDL HTTP Binding Extension 6.1 Identifying the use of the HTTP Binding 6.2 HTTP Syntax Summary (Non-Normative) 6.3 HTTP Binding Rules 6.3.1 HTTP Method Selection 6.3.2 Payload Construction And Serialization Format 6.3.2.1 Serialization rules for XML messages 6.3.3 Default input and output serialization format 6.3.4 HTTP Header Construction 6.4 Specifying the HTTP Version 6.4.1 Description 6.4.2 Relationship to WSDL Component Model 6.4.3 XML Representation 6.4.4 Mapping from XML Representation to Component Properties 6.5 Binding Operations 6.5.1 Description 6.5.2 Relationship to WSDL Component Model 6.5.3 Specification of serialization rules allowed 6.5.4 XML Representation 6.5.5 Mapping from XML Representation to Component Properties 6.6 Declaring HTTP Headers 6.6.1 Description 6.6.2 Relationship to WSDL Component Model 6.6.3 HTTP Header component 6.6.4 XML Representation 6.6.5 Mapping from XML Representation to Component Properties 6.6.6 IRI Identification Of A HTTP Header component 6.7 Specifying HTTP Error Code for Faults 6.7.1 Description 6.7.2 Relationship to WSDL Component Model 6.7.3 XML Representation 6.7.4 Mapping from XML Representation to Component Properties 6.8 Serialization Format of Instance Data 6.8.1 Serialization of the instance data in parts of the HTTP request IRI 6.8.1.1 Construction of the request IRI using the {http location} property 6.8.2 Serialization as application/x-www-form-urlencoded 6.8.2.1 Case of elements cited in the {http location} property 6.8.2.2 Serialization of content of the instance data not cited in the {http location} property 6.8.2.2.1 Construction of the query string 6.8.2.2.2 Controlling the serialization of the query string in the request IRI 6.8.2.2.3 Serialization in the request IRI 6.8.2.2.4 Serialization in the message body 6.8.3 Serialization as application/xml 6.8.4 Serialization as multipart/form-data 6.9 Specifying the Transfer Coding 6.9.1 Description 6.9.2 Relationship to WSDL Component Model 6.9.3 XML Representation 6.9.4 Mapping from XML Representation to Component Properties 6.10 Specifying the Use of HTTP Cookies 6.10.1 Description 6.10.2 Relationship to WSDL Component Model 6.10.3 XML Representation 6.10.4 Mapping from XML Representation to Component Properties 6.11 Specifying HTTP Access Authentication 6.11.1 Description 6.11.2 Relationship to WSDL Component Model 6.11.3 XML Representation 6.11.4 Mapping from XML Representation to Component Properties 6.12 Conformance 7. References 7.1 Normative References 7.2 Informative References Appendices A. Acknowledgements (Non-Normative) B. Component Summary (Non-Normative) C. Part 2 Change Log (Non-Normative) C.1 WSDL 2.0 Extensions Change Log C.2 WSDL 2.0 Bindings Change Log ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1. Introduction The Web Services Description Language WSDL Version 2.0 (WSDL) [WSDL 2.0 Core Language] defines an XML language for describing network services as collections of communication endpoints capable of exchanging messages. WSDL service definitions provide documentation for distributed systems and serve as a recipe for automating the details involved in applications communication. This document defines extensions for the WSDL 2.0 language: • Message exchange patterns: 2. Predefined Message Exchange Patterns • Operation safety declaration: 3. Predefined Extensions • Operation styles: 4. Predefined Operation Styles • Binding extensions: □ A SOAP 1.2 [SOAP 1.2 Part 1: Messaging Framework] binding extension: 5. WSDL SOAP Binding Extension □ An HTTP/1.1 [IETF RFC 2616] binding extension: 6. WSDL HTTP Binding Extension WSDL 2.0 Primer [WSDL 2.0 Primer] is a non-normative document intended to provide an easily understandable tutorial on the features of the WSDL Version 2.0 specifications. The Core Language [WSDL 2.0 Core Language] of the WSDL 2.0 specification describes the core elements of the WSDL language. 1.1 Notational Conventions The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119 [IETF RFC 2119]. This specification uses a number of namespace prefixes throughout; they are listed in Table 1-1. Note that the choice of any namespace prefix is arbitrary and not semantically significant (see [XML Information Set]). Table 1-1. Prefixes and Namespaces used in this specification ┌──────┬────────────────┬─────────────────────────────────────────────────────┐ │Prefix│ Namespace │ Notes │ ├──────┼────────────────┼─────────────────────────────────────────────────────┤ │ │ │This namespace is defined in [WSDL 2.0 Core Language │ │ │ │]. A normative XML Schema [XML Schema Structures], [ │ │ │"http:// │XML Schema Datatypes] document for the "http:// │ │wsdl │www.w3.org/2006/│www.w3.org/2006/01/wsdl" namespace can be found at │ │ │01/wsdl" │http://www.w3.org/2006/01/wsdl. This namespace is │ │ │ │used as the default namespace throughout this │ │ │ │specification. │ ├──────┼────────────────┼─────────────────────────────────────────────────────┤ │ │ │This specification extends in section 3. Predefined │ │ │ │Extensions the "http://www.w3.org/2006/01/ │ │ │"http:// │wsdl-extensions" namespace defined in [WSDL 2.0 Core │ │wsdlx │www.w3.org/2006/│Language]. A normative XML Schema [XML Schema │ │ │01/ │Structures], [XML Schema Datatypes] document for the │ │ │wsdl-extensions"│"http://www.w3.org/2006/01/wsdl-extensions" namespace│ │ │ │can be found at http://www.w3.org/2006/01/ │ │ │ │wsdl-extensions. │ ├──────┼────────────────┼─────────────────────────────────────────────────────┤ │ │ │Defined by this specification. A normative XML Schema│ │ │"http:// │[XML Schema Structures], [XML Schema Datatypes] │ │wsoap │www.w3.org/2006/│document for the "http://www.w3.org/2006/01/wsdl/ │ │ │01/wsdl/soap" │soap" namespace can be found at http://www.w3.org/ │ │ │ │2006/01/wsdl/soap. │ ├──────┼────────────────┼─────────────────────────────────────────────────────┤ │ │ │Defined by this specification. A normative XML Schema│ │ │"http:// │[XML Schema Structures], [XML Schema Datatypes] │ │whttp │www.w3.org/2006/│document for the "http://www.w3.org/2006/01/wsdl/ │ │ │01/wsdl/http" │http" namespace can be found at http://www.w3.org/ │ │ │ │2006/01/wsdl/http. │ ├──────┼────────────────┼─────────────────────────────────────────────────────┤ │ │ │Defined by this specification. A normative XML Schema│ │ │"http:// │[XML Schema Structures], [XML Schema Datatypes] │ │wrpc │www.w3.org/2006/│document for the "http://www.w3.org/2006/01/wsdl/rpc"│ │ │01/wsdl/rpc" │namespace can be found at http://www.w3.org/2006/01/ │ │ │ │wsdl/rpc. │ ├──────┼────────────────┼─────────────────────────────────────────────────────┤ │ │"http:// │Defined in the W3C XML Schema specification [XML │ │xs │www.w3.org/2001/│Schema Structures], [XML Schema Datatypes]. │ │ │XMLSchema" │ │ └──────┴────────────────┴─────────────────────────────────────────────────────┘ Namespace names of the general form "http://example.org/..." and "http:// example.com/..." represent application or context-dependent URIs [IETF RFC 3986 ]. All parts of this specification are normative, with the EXCEPTION of pseudo-schemas, examples, and sections explicitly marked as "Non-Normative". Pseudo-schemas are provided for each component, before the description of this component. They provide visual help for the XML [XML 1.0] serialization. The syntax of BNF pseudo-schemas is the same as the one used in [WSDL 2.0 Core Language]. 2. Predefined Message Exchange Patterns Web Services Description Language (WSDL) message exchange patterns (hereafter simply 'patterns') define the sequence and cardinality of abstract messages listed in an operation. Message exchange patterns also define which other nodes send messages to, and receive messages from, the service implementing the operation. A node is an agent (section 2.3.2.2 Agent of the Web Services Architecture [Web Services Architecture]) that can transmit and/or receive message(s) described in WSDL description(s) and process them. Note: A node may be accessible via more than one physical address or transport. WSDL message exchange patterns describe the interaction at the abstract (interface) level, which may be distinct from the pattern used by the underlying protocol binding (e.g. SOAP Message Exchange Patterns; section 5.10.3 SOAP 1.2 Binding Rules contains the binding rules for the selection of a SOAP 1.2 message exchange pattern based on the WSDL message exchange pattern in use for the SOAP binding extension defined in this specification in section 5. WSDL SOAP Binding Extension). By design, WSDL message exchange patterns abstract out specific message types. Patterns identify placeholders for messages, and placeholders are associated with specific message types by the operation using the pattern. Unless explicitly stated otherwise, WSDL message exchange patterns also abstract out binding-specific information like timing between messages, whether the pattern is synchronous or asynchronous, and whether the message are sent over a single or multiple channels. Like interfaces and operations, WSDL message exchange patterns do not exhaustively describe the set of messages exchanged between a service and other nodes; by some prior agreement, another node and/or the service may send other messages (to each other or to other nodes) that are not described by the pattern. For instance, even though a pattern may define a single message sent from a service to one other node, the Web Service may multicast that message to other nodes. To maximize reuse, WSDL message exchange patterns identify a minimal contract between other parties and Web Services, and contain only information that is relevant to both the Web Service and another party. This specification defines several message exchange patterns for use with WSDL Version 2.0 Part 1: Core Language [WSDL 2.0 Core Language]. 2.1 Template for Message Exchange Patterns New Message Exchange Patterns may be defined by any organization able and willing to do so. It is recommended that the patterns use the general template provided here, after examination of existing predefined patterns. 2.1.1 Pattern Name This pattern consists of [number] message[s, in order] as follows: [enumeration, specifying, for each message] A[n optional] message: 1. indicated by a Interface Message Reference component whose {message label} is "[label]" and {direction} is "[direction]" 2. [received from|sent to] ['some' if first mention] node [node identifier] This pattern uses the rule [fault ruleset reference]. An operation using this message exchange pattern has a {message exchange pattern} property with the value "[pattern IRI]". Note: In the template, the bracketed items indicate a replacement operation. Substitute the correct terms for each bracketed item. Note: the "received from" and "sent to" are always from the point of view of the service, and participating nodes other than the service are implicitly identified as the originators of or destinations for messages in the exchange. 2.2 Fault Propagation Rules WSDL patterns specify their fault propagation model using standard rulesets to indicate where faults may occur. The most common patterns for fault propagation are defined here, and referenced by patterns later in the document. "Propagation" is defined as a best-effort attempt to transmit the fault message to its designated recipient. WSDL patterns specify propagation of faults, not their generation. Nodes which generate a fault MUST attempt to propagate the faults in accordance with the governing ruleset, but it is understood that any delivery of a network message is best effort, not guaranteed. The rulesets establish the direction of the fault message and the fault recipient, they do not provide reliability or other delivery guarantees. When a fault is generated, the generating node MUST attempt to propagate the fault, and MUST do so in the direction and to the recipient specified by the ruleset. However, extensions or binding extensions MAY modify these rulesets. For example, WS-Addressing [WSA 1.0 Core] defines a "FaultTo" address for messages, which is used in lieu of the recipient nominated by the ruleset. Generation of a fault, regardless of ruleset, terminates the exchange. Binding extensions, features, or extension specifications may override the semantics of a fault propagation ruleset, but this practice is strongly discouraged. 2.2.1 Fault Replaces Message Any message after the first in the pattern MAY be replaced with a fault message, which MUST have identical direction. The fault message MUST be delivered to the same target node as the message it replaces, unless otherwise specified by an extension or binding extension. If there is no path to this node, the fault MUST be discarded. This fault propagation rule is identified by the following URI: http:// www.w3.org/2006/01/wsdl/fault-replaces-message 2.2.2 Message Triggers Fault Any message, including the first in the pattern, MAY trigger a fault message, which MUST have opposite direction. The fault message MUST be delivered to the originator of the triggering message, unless otherwise specified by an extension of binding extension. Any node MAY propagate a fault message, and MUST not do so more than once for each triggering message. If there is no path to the originator, the fault MUST be discarded. This fault propagation rule is identified by the following URI: http:// www.w3.org/2006/01/wsdl/message-triggers-fault 2.2.3 No Faults Faults MUST NOT be propagated. This fault propagation rule is identified by the following URI: http:// www.w3.org/2006/01/wsdl/no-faults 2.3 Message Exchange Patterns WSDL patterns are described in terms of the WSDL component model, specifically the Interface Message Reference and Interface Fault Reference components. 2.3.1 In-Only This pattern consists of exactly one message as follows: 1. A message: □ indicated by a Interface Message Reference component whose {message label} is "In" and {direction} is "in" □ received from some node N This pattern uses the rule 2.2.3 No Faults. An operation using this message exchange pattern has a {message exchange pattern} property with the value "http://www.w3.org/2006/01/wsdl/in-only". 2.3.2 Robust In-Only This pattern consists of exactly one message as follows: 1. A message: □ indicated by a Interface Message Reference component whose {message label} is "In" and {direction} is "in" □ received from some node N This pattern uses the rule 2.2.2 Message Triggers Fault. An operation using this message exchange pattern has a {message exchange pattern} property with the value "http://www.w3.org/2006/01/wsdl/ robust-in-only". 2.3.3 In-Out This pattern consists of exactly two messages, in order, as follows: 1. A message: □ indicated by a Interface Message Reference component whose {message label} is "In" and {direction} is "in" □ received from some node N 2. A message: □ indicated by a Interface Message Reference component whose {message label} is "Out" and {direction} is "out" □ sent to node N This pattern uses the rule 2.2.1 Fault Replaces Message. An operation using this message exchange pattern has a {message exchange pattern} property with the value "http://www.w3.org/2006/01/wsdl/in-out". 2.3.4 In-Optional-Out This pattern consists of one or two messages, in order, as follows: 1. A message: □ indicated by a Interface Message Reference component whose {message label} is "In" and {direction} is "in" □ received from some node N 2. An optional message: □ indicated by a Interface Message Reference component whose {message label} is "Out" and {direction} is "out" □ sent to node N This pattern uses the rule 2.2.2 Message Triggers Fault. An operation using this message exchange pattern has a {message exchange pattern} property with the value "http://www.w3.org/2006/01/wsdl/in-opt-out". 2.3.5 Out-Only This pattern consists of exactly one message as follows: 1. A message: □ indicated by a Interface Message Reference component whose {message label} is "Out " and {direction} is "out" □ sent to some node N This pattern uses the rule 2.2.3 No Faults. An operation using this message exchange pattern has a {message exchange pattern} property with the value "http://www.w3.org/2006/01/wsdl/out-only". 2.3.6 Robust Out-Only This pattern consists of exactly one message as follows: 1. message: □ indicated by a Interface Message Reference component whose {message label} is "Out" and {direction} is "out" □ sent to some node N This pattern uses the rule 2.2.2 Message Triggers Fault. An operation using this message exchange pattern has a {message exchange pattern} property with the value "http://www.w3.org/2006/01/wsdl/ robust-out-only". 2.3.7 Out-In This pattern consists of exactly two messages, in order, as follows: 1. A message: □ indicated by a Interface Message Reference component whose {message label} is "Out" and {direction} is "out" □ sent to some node N 2. A message: □ indicated by a Interface Message Reference component whose {message label} is "In" and {direction} is "in" □ sent from node N This pattern uses the rule 2.2.1 Fault Replaces Message. An operation using this message exchange pattern has a {message exchange pattern} property with the value "http://www.w3.org/2006/01/wsdl/out-in". 2.3.8 Out-Optional-In This pattern consists of one or two messages, in order, as follows: 1. A message: □ indicated by a Interface Message Reference component whose {message label} is "Out" and {direction} is "out" □ sent to some node N 2. An optional message: □ indicated by a Interface Message Reference component whose {message label} is "In" and {direction} is "in" □ sent from node N This pattern uses the rule 2.2.2 Message Triggers Fault. An operation using this message exchange pattern has a {message exchange pattern} property with the value "http://www.w3.org/2006/01/wsdl/out-opt-in". 2.4 Security Considerations Note that many of the message exchange patterns defined above describe responses to an initial message (either a normal response message or a fault.) Such responses may be used in attempts to disrupt, attack, or map a network, host, or services. When such responses are directed to an address other than that originating the initial message, the source of an attack may be obscured, or blame laid on a third party, or may enable or exacerbate denial-of-service attacks. Security mechanisms addressing such attacks may prevent the delivery of response messages to the receiving node. Conformance to the message exchange pattern is measured prior to the application of these security mechanisms. 3. Predefined Extensions 3.1 Operation safety This section defines an extension to WSDL 2.0 [WSDL 2.0 Core Language] which allows to mark an operation as a safe interaction, as defined in section 3.4. Safe Interactions of [Web Architecture]. This extension MAY be used for setting defaults in bindings, such as in an HTTP binding per this specification (see 6.5.5 Mapping from XML Representation to Component Properties). 3.1.1 Relationship to WSDL Component Model The safety extension adds the following property to the Interface Operation component model (as defined in [WSDL 2.0 Core Language]): • {safety} REQUIRED. An xs:boolean indicating whether the operation is asserted to be safe for users of the described service to invoke. If this property is "false", then no assertion has been made about the safety of the operation, thus the operation MAY or MAY NOT be safe. However, an operation SHOULD be marked safe if it meets the criteria for a safe interaction defined in Section 3.5 of [Web Architecture]. 3.1.2 XML Representation The XML representation for the safety extension is an attribute information item with the following Infoset properties: • An OPTIONAL safe attribute information item with the following Infoset properties: □ A [local name] of safe □ A [namespace name] of "http://www.w3.org/2006/01/wsdl-extensions" □ A type of xs:boolean 3.1.3 Mapping from XML Representation to Component Properties See Table 3-1. Table 3-1. Mapping from XML Representation to Interface Operation component Extension Properties ┌────────┬────────────────────────────────────────────────────────────────────┐ │Property│ Value │ ├────────┼────────────────────────────────────────────────────────────────────┤ │{safety}│The actual value of the safe attribute information item, if present,│ │ │otherwise the value "false". │ └────────┴────────────────────────────────────────────────────────────────────┘ 4. Predefined Operation Styles This section defines operation styles that can be used to place constraints on Interface Operation components, in particular with respect to the format of the messages they refer to. The serialization formats defined in section 6.8 Serialization Format of Instance Data require bound Interface Operation components to have one or more of the styles defined in this section. 4.1 RPC Style The RPC style is selected by assigning to an Interface Operation component's { style} property the value "http://www.w3.org/2006/01/wsdl/style/rpc". In order to conform with the specification for the RPC style, an Interface Operation component MUST obey the constraints listed below. Furthermore, if the wrpc:signature extension is used, the corresponding attribute information item MUST be valid according to the schema for the extension and additionally MUST obey the constraints listed in 4.1.1 wrpc:signature Extension and 4.1.2 XML Representation of the wrpc:signature Extension. The RPC style MUST NOT be used for Interface Operation components whose { message exchange pattern} property has a value other than "http://www.w3.org/ 2006/01/wsdl/in-only" or "http://www.w3.org/2006/01/wsdl/in-out". The RPC style places restrictions for Remote Procedure Call-types of interactions. When this value is used, the associated messages MUST conform to the rules below, described using XML Schema [XML Schema Structures]. Note that operations containing messages described by other type systems may also indicate use of the RPC style, as long as they are constructed in such a way as to follow these rules. If the Interface Operation component uses a {message exchange pattern} for which there is no output element, i.e. "http://www.w3.org/2006/01/wsdl/ in-only", then the conditions stated below that refer to output elements MUST be considered to be implicitly satisfied. • The value of the {message content model} property for the Interface Message Reference components of the {interface message references} property MUST be "#element". • The content model of input and output {element declaration} elements MUST be defined using a complex type that contains a sequence from XML Schema. • The input sequence MUST only contain elements and element wildcards. It MUST NOT contain other structures such as xs:choice. The input sequence MUST NOT contain more than one element wildcard. The element wildcard, if present, MUST appear after any elements. • The output sequence MUST only contain elements. It MUST NOT contain other structures such as xs:choice. • The sequence MUST contain only local element children. Note that these child elements MAY contain the following attributes: nillable, minOccurs and maxOccurs. • The local name of input element's QName MUST be the same as the Interface Operation component's name. • Input and output elements MUST both be in the same namespace. • The complex type that defines the body of an input or an output element MUST NOT contain any local attributes. Extension attributes are allowed for purposes of managing the message infrastructure (e.g. adding identifiers to facilitate digitally signing the contents of the message). They must not be considered as part of the application data that is conveyed by the message. Therefore, they are never included in an RPC signature (see 4.1.1 wrpc:signature Extension). • If elements with the same qualified name appear as children of both the input and output elements, then they MUST both be declared using the same named type. • The input or output sequence MUST NOT contain multiple children elements declared with the same name. 4.1.1 wrpc:signature Extension The wrpc:signature extension attribute information item MAY be used in conjunction with the RPC style to describe the exact signature of the function represented by an operation that uses the RPC style. When present, the wrpc:signature extension contributes the following property to the Interface Operation component it is applied to: • {rpc signature} REQUIRED. A list of pairs (q, t) whose first component is of type xs:QName and whose second component is of type xs:token. Values for the second component MUST be chosen among the following four: "#in", "# out", "#inout" "#return". The value of the {rpc signature} property MUST satisfy the following conditions: • The value of the first component of each pair (q, t) MUST be unique within the list. • For each child element of the input and output messages of the operation, a pair (q, t) whose first component q is equal to the qualified name of that element MUST be present in the list, with the caveat that elements that appear with cardinality greater than one MUST be treated as a single element. • For each pair (q, #in), there MUST be a child element of the input element with a name of q and there MUST NOT be a child element of the output element with the same name. • For each pair (q, #out), there MUST be a child element of the output element with a name of q and there MUST NOT be a child element of the input element with the same name. • For each pair (q, #inout), there MUST be a child element of the input element with a name of q and there MUST be a child element of the output element with the same name. Furthermore, those two elements MUST have the same type. • For each pair (q, #return), there MUST be a child element of the output element with a name of q and there MUST NOT be a child element of the input element with the same name. The function signature defined by a wrpc:signature extension is determined as follows: 1. Start with the value of the {rpc signature} property, a (possibly empty) list of pairs of this form: [(q0, t0), (q1, t1), ...] 2. Filter the elements of this list into two lists, the first one (L1) comprising pairs whose t component is one of {#in, #out, #inout}, the second (L2) pairs whose t component is #return. During the composition of L1 and L2, the relative order of members in the original list MUST be preserved. For ease of visualization, let's denote the two lists as (L1) [(a0, u0), (a1, u1),...] and (L2) [(r0, #return), (r1, #return),...] respectively. 3. Then, if the input sequence ends with an element wildcard, the formal signature of the function is f([d0] a0, [d1] a1, ..., rest) => (r0, r1, ...) where rest is a formal parameter representing the elements in the input message matched by the element wildcard. Otherwise the formal signature of the function is f([d0] a0, [d1] a1, ...) => (r0, r1, ...) i.e. □ the list of formal arguments to the function is [a0, a1, ...]; □ the direction d of each formal argument a is one of [in], [out], [inout], determined according to the value of its corresponding u token; □ the list of formal return parameters of the function is [r0, r1, ...]; □ each formal argument and formal return parameter is typed according to the type of the child element identified by it (unique per the conditions given above). Note: The wrpc:signature extension allows the specification of multiple return values for an operation. Several popular programming languages support multiple return values for a function. Moreover, for languages which do not, the burden on implementors should be small, as typically multiple return values will be mapped to a single return value of a structure type (or its closest language-specific equivalent). 4.1.2 XML Representation of the wrpc:signature Extension The XML representation for the RPC signature extension is an attribute information item with the following Infoset properties: • A [local name] of signature • A [namespace name] of "http://www.w3.org/2006/01/wsdl/rpc" The type of the name attribute information item is a list type whose item type is the union of the xs:QName type and the subtype of the xs:token type restricted to the following four values: "#in", "#out", "#inout", "#return". See Example 4-1 for an excerpt from the normative schema definition of this type. Additionally, each even-numbered item (0, 2, 4, ...) in the list MUST be of type xs:QName and each odd-numbered item (1, 3, 5, ...) in the list MUST be of the subtype of xs:token described in the previous paragraph. Example 4-1. Definition of the wrpc:signature extension 4.1.3 wrpc:signature Extension Mapping To Properties of an Interface Operation component A wrpc:signature extension attribute information item is mapped to the following property of the Interface Operation component defined by its [owner]. Table 4-1. Mapping of a wrpc:signature Extension to Interface Operation component Properties ┌──────────┬──────────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├──────────┼──────────────────────────────────────────────────────────────────┤ │{rpc │A list of (xs:QName, xs:token) pairs formed by grouping the items │ │signature}│present in the actual value of the wrpc:signature attribute │ │ │information item in the order in which they appear there. │ └──────────┴──────────────────────────────────────────────────────────────────┘ 4.2 IRI Style The IRI style is selected by assigning the Interface Operation component's { style} property the value "http://www.w3.org/2006/01/wsdl/style/iri". When using this style, the value of the {message content model} property of the Interface Message Reference component corresponding to the initial message of the message exchange pattern MUST be "#element". Use of this value indicates that XML Schema [XML Schema Structures] was used to define the schema of the {element declaration} property of the Interface Message Reference component of the Interface Operation component corresponding to the initial message of the message exchange pattern. This schema MUST adhere to the rules below: • The content model of this element is defined using a complex type that contains a sequence from XML Schema. • The sequence MUST only contain elements. It MUST NOT contain other structures such as xs:choice. • The sequence MUST contain only local element children. These child elements MAY contain the nillable attribute, and the attributes minOccurs and maxOccurs MUST have a value 0 or 1. • The localPart of the element's QName MUST be the same as the Interface Operation component's {name}. • The complex type that defines the body of the element or its children elements MUST NOT contain any attributes. • The sequence MUST NOT contain multiple children elements declared with the same local name. • If the children elements of the sequence are defined using an XML Schema type, they MUST derive from xs:simpleType, and MUST NOT be of the type or derive from xs:QName, xs:NOTATION, xs:hexBinary or xs:base64Binary. 4.3 Multipart style The Multipart style is selected by assigning the Interface Operation component's {style} property the value "http://www.w3.org/2006/01/wsdl/style/ multipart". When using this style, the value of the {message content model} property of the Interface Message Reference component corresponding to the initial message of the message exchange pattern MUST be "#element". Use of this value indicates that XML Schema [XML Schema Structures] was used to define the schema of the {element declaration} property of the Interface Message Reference component of the Interface Operation component corresponding to the initial message of the message exchange pattern. This schema MUST adhere to the rules below: • The content model of this element is defined using a complex type that contains a sequence from XML Schema. • The sequence MUST only contain elements. It MUST NOT contain other structures such as xs:choice. • The sequence MUST contain only local element children. These child elements MAY contain the nillable attribute, and the attributes minOccurs and maxOccurs MUST have a value 1. • The localPart of the element's QName MUST be the same as the Interface Operation component's {name}. • The complex type that defines the body of the element or its children elements MUST NOT contain any attributes. • The sequence MUST NOT contain multiple children element declared with the same local name. 5. WSDL SOAP Binding Extension The SOAP binding extension described in this section is SOAP version independent ("1.2" as well as other versions) and an extension for [WSDL 2.0 Core Language] to enable Web Services applications to use SOAP. This binding extension extends WSDL 2.0 by adding properties to the Binding component as defined in [WSDL 2.0 Core Language]. In addition, an XML Infoset representation for these additional properties is provided, along with a mapping from that representation to the various component properties. As allowed in [WSDL 2.0 Core Language], a Binding component MAY exist without indicating a specific Interface component that it applies to. In this case, there MUST NOT be any Binding Operation or Binding Fault components present in the Binding component. The SOAP binding extension is designed with the objective of minimizing what needs to be explicitly declared for common cases. This is achieved by defining a set of default rules which apply for all Interface Operation components of an Interface component, unless specifically overridden on a per Interface Operation basis. Thus, if a given Interface Operation component is not referred to specifically, then all the default rules apply for that component. That is, per the requirements of [WSDL 2.0 Core Language], all operations of an Interface component are bound according to this binding extension. A subset of the HTTP properties specified in the HTTP binding extension defined in section 6. WSDL HTTP Binding Extension may be expressed in a SOAP binding when the SOAP binding uses HTTP as the underlying protocol, for example, when the value of the {soap underlying protocol} property of the Binding component is "http://www.w3.org/2003/05/soap/bindings/HTTP/". The properties that are allowed are the ones that describe the underlying protocol: • {http version} on Binding components, as defined in 6.4 Specifying the HTTP Version • {http location} on Binding Operation components, as defined in 6.5 Binding Operations • {http headers} on Binding Message Reference and Binding Fault components, as defined in 6.6 Declaring HTTP Headers • {http transfer coding default} on Binding and Binding Operation components, {http transfer coding} on Binding Message Reference and Binding Fault components, as defined in 6.9 Specifying the Transfer Coding • {http cookies} on Binding components, as defined in 6.10 Specifying the Use of HTTP Cookies • {http authentication scheme} and {http authentication realm} on Endpoint components, as defined in 6.11 Specifying HTTP Access Authentication 5.1 XML Syntax Summary (Non-Normative) * * * * * * * *?? [ | ]* * wsoap:mep="xs:anyURI"? wsoap:action="xs:anyURI"? > * * * * * *?? [ | ]* * * * * *?? [ | ]* * * * [ | ]* * * * [ | ]* * [ | ]* * [ | ]* * [ | ]* [ | ]* Note: The double question marks ("??") after the attributes in the whttp namespace indicates that those optional attributes only make sense when the SOAP binding uses HTTP as the underlying protocol, for example, when the value of the wsoap:protocol attribute is "http://www.w3.org/2003/05/soap/bindings/HTTP/". 5.2 Identifying the use of the SOAP Binding A Binding component (defined in [WSDL 2.0 Core Language]) is identified as a SOAP binding by assigning the value "http://www.w3.org/2006/01/wsdl/soap" to the {type} property of the Binding component. 5.3 SOAP Binding Rules • Payload Construction. When formulating the SOAP envelope to be transmitted, the contents of the payload (i.e., the contents of the SOAP Body element information item of the SOAP envelope) MUST be what is defined by the corresponding Interface Message Reference component. This is subject to optimization by a feature that is in use which may affect serialization, such as MTOM [SOAP Message Transmission Optimization Mechanism]. The following binding rules MUST be adhered to: □ If the value of the {message content model} property of the Interface Message Reference component is "#any" then the payload MAY be any one XML element. □ If the value is "#none" then the payload MUST be empty. □ If the value is "#element" then the payload will be the element information item identified by the {element declaration} property of the Interface Message Reference component. □ If the Interface Message Reference component is declared using a non-XML type system (as considered in the Types section of [WSDL 2.0 Core Language]) then additional binding rules MUST be defined to indicate how to map those components into the SOAP envelope. Note: This SOAP binding extension only allows one single element in SOAP body. • SOAP Header Construction. If the {soap headers} property as defined in section 5.9 Declaring SOAP Header Blocks exists and is not empty in a Binding Message Reference or Binding Fault component, element information item conforming to the element declaration of a SOAP Header Block component's {element declaration} property, in the {soap headers} property, MAY be turned into a SOAP header block for the corresponding message. If the value of the SOAP Header Block component's {required} property is "true", the inclusion of this SOAP header block is REQUIRED, otherwise it is OPTIONAL. And, if the SOAP Header Block component's {mustUnderstand} property is present and its value is "true", that particular SOAP header block should be marked with a mustUnderstand attribute information item with a value of "true" or "1" as per the SOAP specification. SOAP header blocks other than the ones declared in the {soap headers} property may be present at run-time, such as the SOAP header blocks resulting from SOAP modules declared as explained in section 5.8 Declaring SOAP Modules. 5.4 Specifying the SOAP Version 5.4.1 Description Every SOAP binding MUST indicate what version of SOAP is in use for the operations of the interface that this binding applies to. By default, SOAP 1.2 [SOAP 1.2 Part 1: Messaging Framework] is used. 5.4.2 Relationship to WSDL Component Model The SOAP protocol specification adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {soap version} REQUIRED. A xs:string, to the Binding component. 5.4.3 XML Representation ... The XML representation for specifying the SOAP version is an optional attribute information item with the following Infoset properties: • A [local name] of version • A [namespace name] of "http://www.w3.org/2006/01/wsdl/soap" • A type of xs:string 5.4.4 Mapping from XML Representation to Component properties See Table 5-1. Table 5-1. Mapping from XML Representation to Binding component Extension Properties ┌──────────┬──────────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├──────────┼──────────────────────────────────────────────────────────────────┤ │{soap │The actual value of the wsoap:version attribute information item │ │version} │if present, otherwise "1.2". │ └──────────┴──────────────────────────────────────────────────────────────────┘ 5.5 Specifying the SOAP Underlying Protocol 5.5.1 Description Every SOAP binding MUST indicate what underlying protocol is in use. 5.5.2 Relationship to WSDL Component Model The SOAP protocol specification adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {soap underlying protocol} REQUIRED. A xs:anyURI, which is an absolute IRI as defined by [IETF RFC 3987], to the Binding component. 5.5.3 XML Representation ... The XML representation for specifying the SOAP protocol is a REQUIRED attribute information item with the following Infoset properties: • A [local name] of protocol • A [namespace name] of "http://www.w3.org/2006/01/wsdl/soap" • A type of xs:anyURI 5.5.4 Mapping from XML Representation to Component Properties See Table 5-2. Table 5-2. Mapping from XML Representation to Binding component Extension Properties ┌─────────────────────┬───────────────────────────────────────────────────────┐ │ Property │ Value │ ├─────────────────────┼───────────────────────────────────────────────────────┤ │{soap underlying │The actual value of the wsoap:protocol attribute │ │protocol} │information item. │ └─────────────────────┴───────────────────────────────────────────────────────┘ 5.6 Binding Faults 5.6.1 Description For every Interface Fault component contained in an Interface component, a mapping to a SOAP Fault must be described. This binding extension specification allows the user to indicate the SOAP fault code and subcodes that are transmitted for a given Interface Fault component. 5.6.2 Relationship to WSDL Component Model The SOAP Fault binding extension adds the following properties to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {soap fault code} REQUIRED. A union of xs:QName and xs:token where the allowed token value is "#any", to the Binding Fault component. The value of this property identifies a possible SOAP fault for the operations in scope. If the value of this property is "#any", no assertion is made about the value of the SOAP fault code. • {soap fault subcodes} REQUIRED. A union of list of xs:QName, and xs:token where the allowed token value is "#any", to the Binding Fault component. The value of this property identifies one or more subcodes for this SOAP fault. If the value of this property is "#any", no assertion is made about the value of the SOAP fault subcode. 5.6.3 XML Representation * [ | ]* * The XML representation for binding a SOAP Fault are two attribute information items with the following Infoset properties: • wsoap:code OPTIONAL attribute information item □ A [local name] of code □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/soap" □ A type of union of xs:QName and xs:token where the allowed token value is "#any" • wsoap:subcodes OPTIONAL attribute information item □ A [local name] of subcodes □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/soap" □ A type of union of list of xs:QName, and xs:token where the allowed token value is "#any" 5.6.4 Mapping XML Representation to Component Properties See Table 5-3. Table 5-3. Mapping from XML Representation to SOAP Fault component Properties ┌──────────────┬──────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │{soap fault │The actual value of the code attribute information item if │ │code} │present; otherwise "#any". │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │{soap fault │The actual value of the subcodes attribute information item, │ │subcodes} │if present; otherwise "#any". │ └──────────────┴──────────────────────────────────────────────────────────────┘ 5.7 Binding Operations 5.7.1 Description For every Interface Operation component contained in an Interface component, in addition to the binding rules (for SOAP 1.2, see 5.10.3 SOAP 1.2 Binding Rules ), there may be additional binding information to be specified. This binding extension specification allows the user to indicate the SOAP Message Exchange Pattern (MEP) and a value for the SOAP Action Feature on a per-operation basis. 5.7.2 Relationship to WSDL Component Model The SOAP Operation binding extension specification adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {soap mep default} OPTIONAL. A xs:anyURI, which is an absolute IRI as defined by [IETF RFC 3987], to the Binding component. The value of this property identifies the default SOAP Message Exchange Pattern (MEP) for all the Interface Operation components of any Interface component that uses this Binding component. • {soap mep} OPTIONAL. A xs:anyURI, which is an absolute IRI as defined by [ IETF RFC 3987], to the Binding Operation component. The value of this property identifies the SOAP Message Exchange Pattern (MEP) for this specific operation. • {soap action} OPTIONAL. A xs:anyURI, which is an absolute IRI as defined by [IETF RFC 3987], to the Binding Operation component. The value of this property identifies the value of the SOAP Action Feature for the initial message of the message exchange pattern of the Interface Operation bound, as specified in the binding rules of bindings to specific versions of SOAP (see 5.10.3 SOAP 1.2 Binding Rules for the SOAP 1.2 binding when the value of the {soap version} property of the Binding component is "1.2"). 5.7.3 XML Representation The XML representation for binding an Operation are two attribute information items with the following Infoset properties: • wsoap:mep OPTIONAL attribute information item □ A [local name] of mep □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/soap" □ A type of xs:anyURI • wsoap:action OPTIONAL attribute information item □ A [local name] of action □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/soap" □ A type of xs:anyURI The following attribute information item for the binding element information item is defined: • A [local name] of mepDefault • A [namespace name] of "http://www.w3.org/2006/01/wsdl/soap" • A type of xs:anyURI 5.7.4 Mapping from XML Representation to Component Properties See Table 5-4. Table 5-4. Mapping from XML Representation to SOAP Operation Component Properties ┌──────────────┬──────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │{soap mep │The actual value of the wsoap:mepDefault attribute information│ │default} │item, if present. │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │{soap mep} │The actual value of the wsoap:mep attribute information item, │ │ │if present. │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │{soap action} │The actual value of the action attribute information item, if │ │ │any. │ └──────────────┴──────────────────────────────────────────────────────────────┘ 5.8 Declaring SOAP Modules 5.8.1 Description The SOAP messaging framework allows to engage one or more additional features (typically implemented as one or more SOAP header blocks), as defined by SOAP Modules (see [SOAP 1.2 Part 1: Messaging Framework]). This binding extension specification allows users to indicate which SOAP Modules are in use across an entire binding, on a per operation basis or on a per message basis. 5.8.2 Relationship to WSDL Component Model The SOAP Module component adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {soap modules} OPTIONAL. A set of SOAP Module components as defined in 5.8.3 SOAP Module component to the Binding component • Similarly, {soap modules} OPTIONAL, to the Binding Operation component • Similarly, {soap modules} OPTIONAL, to the Binding Message Reference component • Similarly, {soap modules} OPTIONAL, to the Binding Fault component • Similarly, {soap modules} OPTIONAL, to the Binding Fault Reference component The SOAP modules applicable for a particular operation of any service consists of all modules specified in the input or output Binding Message Reference components, the infault or outfault Binding Fault Reference components, those specified within the Binding Fault components, those specified within the Binding Operation components and those specified within the Binding component. If any module is declared in multiple components, then the requiredness of that module is defined by the closest declaration, where closeness is defined by whether it is specified directly at the Binding Message Reference component or Binding Fault Reference component level, the Binding Fault level or the Binding Operation component level or the Binding component level, respectively. 5.8.3 SOAP Module component The SOAP Module component identifies a SOAP module that is in use. The properties of the SOAP Module component are as follows: • {ref} REQUIRED. A xs:anyURI, which is an absolute IRI as defined by [IETF RFC 3987]. The value of this property identifies the specific SOAP module that is in use. • {required} REQUIRED. A xs:boolean indicating if the SOAP module is required. • {parent} REQUIRED. The Binding, Binding Operation, Binding Message Reference, Binding Fault or Binding Fault Reference component component that contains this component in its {soap modules} property. 5.8.4 XML Representation * * * * * * * The XML representation for a SOAP Module component is an element information item with the following Infoset properties: • A [local name] of module • A [namespace name] of "http://www.w3.org/2006/01/wsdl/soap" • One or more attribute information items amongst its [attributes] as follows: □ A REQUIRED ref attribute information item with the following Infoset properties: ☆ A [local name] of ref ☆ A [namespace name] which has no value ☆ A type of xs:anyURI □ An OPTIONAL required attribute information item with the following Infoset properties: ☆ A [local name] of required ☆ A [namespace name] which has no value ☆ A type of xs:boolean □ Zero or more namespace qualified attribute information items. The [namespace name] of such attribute information items MUST NOT be "http: //www.w3.org/2006/01/wsdl" and MUST NOT be "http://www.w3.org/2006/01/ wsdl/soap". • Zero or more element information item amongst its [children], in order, as follows: 1. Zero or more documentation element information items as defined in [ WSDL 2.0 Core Language]. 2. Zero or more namespace-qualified element information items amongst its [children]. The [namespace name] of such element information items MUST NOT be "http://www.w3.org/2006/01/wsdl" and MUST NOT be "http:// www.w3.org/2006/01/wsdl/soap". 5.8.5 Mapping from XML Representation to Component Properties See Table 5-5. Table 5-5. Mapping from XML Representation to SOAP Module component-related Properties ┌──────────┬──────────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├──────────┼──────────────────────────────────────────────────────────────────┤ │ │The set of SOAP Module components corresponding to all the module │ │{soap │element information item in the [children] of the binding , │ │modules} │operation , fault , input , output , infault , outfault element │ │ │information items, if any. │ ├──────────┼──────────────────────────────────────────────────────────────────┤ │{ref} │The actual value of the ref attribute information item. │ ├──────────┼──────────────────────────────────────────────────────────────────┤ │{required}│The actual value of the required attribute information item if │ │ │present, otherwise "false". │ ├──────────┼──────────────────────────────────────────────────────────────────┤ │ │The Binding, Binding Operation, Binding Message Reference, Binding│ │{parent} │Fault or Binding Fault Reference component corresponding to the │ │ │binding , operation , fault , input , output , infault or outfault│ │ │element information item in [parent]. │ └──────────┴──────────────────────────────────────────────────────────────────┘ 5.8.6 IRI Identification Of A SOAP Module component WSDL Version 2.0 Part 1: Core Language [WSDL 2.0 Core Language] defines a fragment identifier syntax for identifying components of a WSDL 2.0 document. A SOAP Module component can be identified using the wsdl.extension XPointer Framework scheme: wsdl.extension(http://www.w3.org/2006/01/wsdl/soap, wsoap.module(parent/ref)) 1. parent is the pointer part of the {parent} component, as specified in WSDL Version 2.0 Part 1: Core Language. 2. ref is the value of the {ref} property of the component. 5.9 Declaring SOAP Header Blocks 5.9.1 Description SOAP allows the use of header blocks in the header part of the message. This binding extension allows users to declare the SOAP header blocks in use on a per message and on a per fault basis. 5.9.2 Relationship to WSDL Component Model The SOAP Header Blocks binding extension specification adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {soap headers} OPTIONAL. A set of SOAP Header Block components as defined in 5.9.3 SOAP Header Block component, to the Binding Message Reference component. • Similarly, {soap headers} OPTIONAL, to the Binding Fault component. 5.9.3 SOAP Header Block component A SOAP Header Block component describes an abstract piece of header data (SOAP header block) that is associated with the exchange of messages between the communicating parties. The presence of a SOAP Header Block component in a WSDL description indicates that the service supports headers and MAY require a Web service consumer/client that interacts with the service to use the described header block. Zero or one such header block may be used. The properties of the SOAP Header Block component are as follows: • {element declaration} REQUIRED. A xs:QName, a reference to an XML element declaration in the {element declarations} property of the Description component. This XML element declaration represents a SOAP header block. • {mustUnderstand} REQUIRED. A xs:boolean. When its value is "true", the SOAP header block MUST be decorated with a SOAP mustUnderstand attribute information item with a value of "true"; if so, it is an error for the XML element declaration referenced by the {element declaration} property not to allow this SOAP mustUnderstand attribute information item. Otherwise, no additional constraint is placed on the presence and value of a SOAP mustUnderstand attribute information item. • {required} REQUIRED. A xs:boolean indicating if the SOAP header block is required. If the value is "true", then the SOAP header block MUST be included in the message. If it is "false", then the SOAP header block MAY be included. • {parent} REQUIRED. The Binding Fault or Binding Message Reference component component that contains this component in its {soap headers} property. 5.9.4 XML Representation * * ... * * ... * * ... * * The XML representation for a SOAP Header Block component is an element information item with the following Infoset properties: • A [local name] of header • A [namespace name] of "http://www.w3.org/2006/01/wsdl/soap" • One or more attribute information items amongst its [attributes] as follows: □ A REQUIRED element attribute information item with the following Infoset properties: ☆ A [local name] of element ☆ A [namespace name] which has no value ☆ A type of xs:QName □ An OPTIONAL mustUnderstand attribute information item with the following Infoset properties: ☆ A [local name] of mustUnderstand ☆ A [namespace name] which has no value ☆ A type of xs:boolean □ An OPTIONAL required attribute information item with the following Infoset properties: ☆ A [local name] of required ☆ A [namespace name] which has no value ☆ A type of xs:boolean □ Zero or more namespace qualified attribute information items. The [namespace name] of such attribute information items MUST NOT be "http: //www.w3.org/2006/01/wsdl" and MUST NOT be "http://www.w3.org/2006/01/ wsdl/soap". • Zero or more element information item amongst its [children], in order, as follows: 1. Zero or more documentation element information items as defined in [ WSDL 2.0 Core Language]. 2. Zero or more namespace-qualified element information items amongst its [children]. The [namespace name] of such element information items MUST NOT be "http://www.w3.org/2006/01/wsdl" and MUST NOT be "http:// www.w3.org/2006/01/wsdl/soap". 5.9.5 Mapping XML Representation to Component Properties See Table 5-6. Table 5-6. Mapping from XML Representation to SOAP Header Block component-related Properties ┌────────────────┬────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├────────────────┼────────────────────────────────────────────────────────────┤ │ │The set of SOAP Header Block components corresponding to all│ │{soap headers} │the header element information item in the [children] of the│ │ │fault , input or output element information item, if any. │ ├────────────────┼────────────────────────────────────────────────────────────┤ │ │The element declaration from the {element declarations} │ │ │resolved to by the value of the element attribute │ │{element │information item. It is an error for the element attribute │ │declaration} │information item to have a value and that value does not │ │ │resolve to a global element declaration from the {element │ │ │declarations} property of the Description component. │ ├────────────────┼────────────────────────────────────────────────────────────┤ │{mustUnderstand}│The actual value of the mustUnderstand attribute information│ │ │item if present, otherwise "false". │ ├────────────────┼────────────────────────────────────────────────────────────┤ │{required} │The actual value of the required attribute information item │ │ │if present, otherwise "false". │ ├────────────────┼────────────────────────────────────────────────────────────┤ │ │The Binding Fault or Binding Message Reference component │ │{parent} │corresponding to the fault , input or output element │ │ │information item in [parent]. │ └────────────────┴────────────────────────────────────────────────────────────┘ 5.9.6 IRI Identification Of A SOAP Header Block component WSDL Version 2.0 Part 1: Core Language [WSDL 2.0 Core Language] defines a fragment identifier syntax for identifying components of a WSDL 2.0 document. A SOAP Header Block component can be identified using the wsdl.extension XPointer Framework scheme: wsdl.extension(http://www.w3.org/2006/01/wsdl/soap, wsoap.header(parent/ namespace#name)) 1. parent is the pointer part of the {parent} component, as specified in WSDL Version 2.0 Part 1: Core Language. 2. namespace is the {element declaration} property value's namespace URI. 3. name is the {element declaration} property value's local name. 5.10 WSDL SOAP 1.2 Binding 5.10.1 Identifying a WSDL SOAP 1.2 Binding A WSDL SOAP Binding is identified as a SOAP 1.2 binding by assigning the value "1.2" to the {soap version} property of the Binding component. 5.10.2 Description The WSDL SOAP 1.2 binding extension defined in this section is an extension of the SOAP binding defined in section 5. WSDL SOAP Binding Extension to enable Web Service applications to use SOAP 1.2 [SOAP 1.2 Part 1: Messaging Framework ]. The WSDL SOAP 1.2 binding extension supports the SOAP 1.2 HTTP binding defined by the [SOAP 1.2 Part 2: Adjuncts] specification. This is indicated by assigning the URI "http://www.w3.org/2003/05/soap/bindings/HTTP/" (as defined by [SOAP 1.2 Part 2: Adjuncts]) to the {soap underlying protocol} property. Other values MAY be used for this property in conjunction with the SOAP 1.2 binding extension defined by this specification provided that the semantics of such protocols are consistent with this binding extension. Default rules in section 5.10.3 SOAP 1.2 Binding Rules define the relationship between SOAP message exchange patterns defined in [SOAP 1.2 Part 2: Adjuncts] and WSDL message exchange patterns defined in section 2. Predefined Message Exchange Patterns. When the SOAP Message Exchange Pattern is the SOAP 1.2 Response MEP and the underlying protocol is HTTP, the Binding Operation may use the {http location} property defined in section 6.5 Binding Operations. When this property is present on the Binding Operation component, the Endpoint component also follows the rules for constructing the address from the {address} property and the { http location} property values. 5.10.3 SOAP 1.2 Binding Rules These binding rules are applicable to SOAP 1.2 bindings. • SOAP Action Feature. The value of the SOAP Action Feature for the initial message of the message exchange pattern of the Interface Operation bound is specified by the {soap action} property of this Binding Operation component. If the Binding Operation component does NOT have a {soap action} property defined, then the SOAP Action Feature (see [SOAP 1.2 Part 2: Adjuncts]) has NO value. Otherwise, its value is the value of the SOAP Action Feature for the initial message of the message exchange pattern. • SOAP MEP Selection. For a given Interface Operation component, if there is a Binding Operation component whose {interface operation} property matches the component in question and its {soap mep} property has a value, then SOAP MEP is the value of the {soap mep} property. Otherwise, the SOAP MEP is the value of the Binding component's {soap mep default}, if any. Otherwise, if the Interface Operation component's {message exchange pattern } property has the value "http://www.w3.org/2006/01/wsdl/in-out", then the SOAP MEP is the URI "http://www.w3.org/2003/05/soap/mep/request-response/" identifying the SOAP Request-Response Message Exchange Pattern as defined in [SOAP 1.2 Part 2: Adjuncts]. Otherwise (i.e. if the Interface Operation component has any other value for the {message exchange pattern} property), it is an ERROR. ┌──────────────────────────────────────────────────────────────────────┬──┐ │Editorial note: One-way MEP defaulting │ │ ├──────────────────────────────────────────────────────────────────────┴──┤ │The Web Services Description Working Group would like to add a rule here │ │defaulting to a standardized SOAP 1.2 one-way MEP for one-way operations │ │if one becomes available. Feedback is sought on this topic. │ └─────────────────────────────────────────────────────────────────────────┘ • HTTP Method Selection. This default binding rule is applicable when the value of the {soap underlying protocol} property of the Binding component is "http://www.w3.org/2003/05/soap/bindings/HTTP/". If the SOAP MEP selected as specified above has the value "http://www.w3.org/2003/05/soap/ mep/request-response/" then the HTTP method used is "POST". If the SOAP MEP selected has the value "http://www.w3.org/2003/05/soap/mep/soap-response/" then the HTTP method used is "GET". • HTTP IRI Generation. This default binding rule is applicable when the value of the {soap underlying protocol} property of the Binding component is "http://www.w3.org/2003/05/soap/bindings/HTTP/". If the SOAP MEP selected is "http://www.w3.org/2003/05/soap/mep/soap-response/" then the value of the SOAP "http://www.w3.org/2003/05/soap/mep/ImmediateDestination" property MUST be generated using the HTTP binding extension's rules for generating a IRI for HTTP GET (see 6.8.2 Serialization as application/ x-www-form-urlencoded ). The input serialization format of application/ x-www-form-urlencoded is the only supported serialization format for HTTP GET in the SOAP Response Message Exchange Pattern. 5.10.4 Binding WSDL 2.0 MEPs to SOAP 1.2 MEPs This section describes the relationship between WSDL components and SOAP 1.2 MEP properties as described in [SOAP 1.2 Part 2: Adjuncts]. 5.10.4.1 Using SOAP Request-Response When using the WSDL "http://www.w3.org/2006/01/wsdl/in-out" message exchange pattern bound to a SOAP "http://www.w3.org/2003/05/soap/mep/request-response/" MEP (as would be the case for a usual SOAP-over-HTTP In-Out operation), this section describes the relationships. Extensions (such as [WSA 1.0 Core]) MAY alter these mappings. 5.10.4.1.1 The Client As the client, the property "http://www.w3.org/2003/05/soap/bindingFramework/ ExchangeContext/Role" takes the value "RequestingSOAPNode". The SOAP "http://www.w3.org/2003/05/soap/mep/ImmediateDestination" property takes the value of the WSDL {address} property of the Endpoint component. The WSDL "In" message is mapped to the SOAP "http://www.w3.org/2003/05/soap/mep /OutboundMessage" property. The WSDL "Out" message maps to the SOAP "http://www.w3.org/2003/05/soap/mep/ InboundMessage" property. 5.10.4.1.2 The Service As the service, the property "http://www.w3.org/2003/05/soap/bindingFramework/ ExchangeContext/Role" takes the value "RespondingSOAPNode". The WSDL "In" message is mapped to the SOAP "http://www.w3.org/2003/05/soap/mep /InboundMessage" property. The WSDL "Out" message maps to the SOAP "http://www.w3.org/2003/05/soap/mep/ OutboundMessage" property. 5.10.4.2 Using SOAP-Response When using the WSDL "http://www.w3.org/2006/01/wsdl/in-out" message exchange pattern bound to a "http://www.w3.org/2003/05/soap/mep/soap-response/" SOAP MEP, this section describes the relationships. 5.10.4.2.1 The Client As the client, the property "http://www.w3.org/2003/05/soap/bindingFramework/ ExchangeContext/Role" takes the value "RequestingSOAPNode". The SOAP "http://www.w3.org/2003/05/soap/mep/ImmediateDestination" property takes the value of the WSDL {address} property, modified by the {http location} property following the rules described in section 6.8.2 Serialization as application/x-www-form-urlencoded . The SOAP "http://www.w3.org/2003/05/soap/mep/OutboundMessage" property has no value. The WSDL "Out" message maps to the SOAP "http://www.w3.org/2003/05/soap/mep/ InboundMessage" property. 5.10.4.2.2 The Service As the service, the property "http://www.w3.org/2003/05/soap/bindingFramework/ ExchangeContext/Role" takes the value "RespondingSOAPNode". The WSDL "In" message is constructed from the destination URI as per the rules in section 6.8.2 Serialization as application/x-www-form-urlencoded . The WSDL "Out" message maps to the SOAP "http://www.w3.org/2003/05/soap/mep/ OutboundMessage" property. 5.11 Conformance An element information item whose namespace name is "http://www.w3.org/2006/01/ wsdl" and whose local part is description conforms to this binding extension specification if the element information items and attribute information items whose namespace is http://www.w3.org/2006/01/wsdl/soap conform to the XML Schema for that element or attribute as defined by this specification and additionally adheres to all the constraints contained in this specification. 6. WSDL HTTP Binding Extension The HTTP binding extension described in this section is an extension for [WSDL 2.0 Core Language] to enable Web Services applications to use HTTP 1.1 [IETF RFC 2616] (as well as other versions of HTTP) and HTTPS [IETF RFC 2818]. This binding extension extends WSDL 2.0 by adding properties to the component model defined in [WSDL 2.0 Core Language]. In addition an XML Infoset representation for these additional properties is provided, along with a mapping from that representation to the various component properties. As allowed in [WSDL 2.0 Core Language], a Binding component MAY exist without indicating a specific Interface component that it applies to. In this case there MUST NOT be any Binding Operation or Binding Fault components present in the Binding component. The HTTP binding extension is designed with the objective of minimizing what needs to be explicitly declared for common cases. This is achieved by defining a set of default rules which apply for all Interface Operation components of an Interface component, unless specifically overridden on a per Interface Operation basis. Thus, if a given Interface Operation component is not referred to specifically, then all the default rules apply for that component. That is, per the requirements of [WSDL 2.0 Core Language] all operations of an Interface component are bound by an HTTP binding. [Definition: The internal tree representation of an input, output or fault message is called an instance data, and is constrained by the schema definition associated the message: the XML element referenced in the {element declaration} property of the Interface Message Reference component for input and output messages (unless the {message content model} is "#any"), and in the {element declaration} property of an Interface Fault component for faults.] 6.1 Identifying the use of the HTTP Binding A Binding component (defined in [WSDL 2.0 Core Language]) is identified as an HTTP binding by assigning the value "http://www.w3.org/2006/01/wsdl/http" to the {type} property of the Binding component. 6.2 HTTP Syntax Summary (Non-Normative) ? * * * [ | ]* * * * [ | ]* * * [ | ]* * [ | ]* * [ | ]* * [ | ]* [ | ]* 6.3 HTTP Binding Rules 6.3.1 HTTP Method Selection When formulating the HTTP message to be transmitted, the HTTP request method used MUST be the following: • For a given Interface Operation component, if there is a Binding Operation component whose {interface operation} property matches the component in question and its {http method} property has a value, then the value of the {http method} property. • Otherwise, the value of the Binding component's {http method default}, if any. • Otherwise, if a {safety} property as defined in 3.1 Operation safety is present on the bound Interface Operation component and has a value of "true", the value "GET". • Otherwise, it is an ERROR. 6.3.2 Payload Construction And Serialization Format When formulating the HTTP message to be transmitted, the contents of the payload (i.e. the contents of the HTTP message body) MUST be what is defined by the corresponding Interface Message Reference or Interface Fault components, serialized as specified by the serialization format used. [Definition: The serialization format is a media type token ("type/subtype"). It identifies rules to serialize a message in an HTTP message. Its value follows the following rules. The HTTP request serialization format MUST be in the media type range specified by the {http input serialization} property. The HTTP response serialization format MUST be in the media type range specified by the {http output serialization} property. The HTTP serialization format of a fault MUST be in the media type range specified by the {http fault serialization} property. The concept of media type range is defined in Section 14.1 of [IETF RFC 2616]. The serialization format MAY have associated media type parameters (specified with the parameter production of media-range in Section 14.1 of [IETF RFC 2616]. ] Section 6.8 Serialization Format of Instance Data defines serialization formats supported by this binding extension along with their constraints. • Interface Message Reference component: □ If the value of the {message content model} property of the Interface Message Reference bound is "#any" or "#element", the serialization of the instance data is specified as defined in section 6.3.2.1 Serialization rules for XML messages. □ If the value is "#none" then the payload MUST be empty and the value of the corresponding serialization property ({http input serialization} or {http output serialization}) is ignored. □ If the value is "#other" then the serialization format and its associated media type parameters, if any specifies the value of the HTTP Content-Type entity-header field as defined in section 14.17 of [ IETF RFC 2616]. The serialization of the payload is undefined. • Interface Fault component: the serialization of the instance data is specified as defined in section 6.3.2.1 Serialization rules for XML messages. If the Interface Message Reference component or the Interface Fault component is declared using a non-XML type system (as considered in the Types section of [WSDL 2.0 Core Language]) then additional binding rules MUST be defined to indicate how to map those components into the HTTP envelope. 6.3.2.1 Serialization rules for XML messages The serialization rules for messages whose {message content model} is either "# element" or "#any" and for fault messages are as follows: • If the serialization format is "application/x-www-form-urlencoded", then the serialization of the instance data is defined by section 6.8.2 Serialization as application/x-www-form-urlencoded . • If the serialization format is "multipart/form-data", then the serialization of the instance data is defined by section 6.8.4 Serialization as multipart/form-data . • If the serialization format is "application/xml", then the serialization of the instance data is defined by section 6.8.3 Serialization as application/ xml . • Otherwise, then the serialization of the instance data is defined by section 6.8.3 Serialization as application/xml with the following additional rule: the value of the HTTP Content-Type entity-header field is the value of the serialization format and its associated media type parameters, if any. 6.3.3 Default input and output serialization format Section Table 6-1 defines the default values for the GET, POST, PUT and DELETE values of the HTTP method as selected in section 6.3.1 HTTP Method Selection. Table 6-1. Default values for GET, POST, PUT and DELETE ┌─────────────────────────────┬─────────────────────────┬─────────────────────┐ │ HTTP Method │ Default Input │ Default Output │ │ │ Serialization │ Serialization │ ├─────────────────────────────┼─────────────────────────┼─────────────────────┤ │Selected in 6.3.1 HTTP Method│{http input serialization│ {http output │ │ Selection │ } │ serialization} │ ├─────────────────────────────┼─────────────────────────┼─────────────────────┤ │GET │application/ │application/xml │ │ │x-www-form-urlencoded │ │ ├─────────────────────────────┼─────────────────────────┼─────────────────────┤ │POST │application/xml │application/xml │ ├─────────────────────────────┼─────────────────────────┼─────────────────────┤ │PUT │application/xml │application/xml │ ├─────────────────────────────┼─────────────────────────┼─────────────────────┤ │DELETE │application/ │application/xml │ │ │x-www-form-urlencoded │ │ └─────────────────────────────┴─────────────────────────┴─────────────────────┘ Note: The application/x-www-form-urlencoded serialization format places constraints on the XML Schema definition of the {element declaration} property of the Interface Message Reference components of the Interface Operation component bound (see 6.8.2 Serialization as application/x-www-form-urlencoded ). The default value for the {http input serialization} and {http output serialization} properties for any other HTTP method selected is application/ xml. Mechanisms other than setting the serialization properties MAY modify the serialization format of the instance data corresponding to the message. An example of such modification is the WSDL SOAP Binding HTTP IRI Serialization rules specified in 5.3 SOAP Binding Rules. This binding extension specifies that the SOAP-Response Message Exchange Pattern ([SOAP 1.2 Part 2: Adjuncts], Section 6.3) only supports input message serialization as application/ x-www-form-urlencoded. Other examples of such mechanisms are other message exchange patterns or binding extensions. 6.3.4 HTTP Header Construction If the {http headers} property as defined in section 6.6 Declaring HTTP Headers exists and is not empty in a Binding Message Reference or Binding Fault component, HTTP headers conforming to each HTTP Header component contained in this {http headers} property MAY be serialized as follows: • The HTTP header field name used is the value of the {name} property of the HTTP Header component. If an HTTP header field corresponding to the value of the {name} property is set by a mechanism other than the HTTP binding, such as the HTTP stack or another feature, then an error MUST be raised. • The HTTP header field value, whose XML Schema type is declared by the {type definition} property of the HTTP Header component, is serialized following the rules of the field-value production of section 4.2 of [IETF RFC 2616]. If the value of an HTTP Header component's {required} property is "true", the inclusion of this HTTP header field is REQUIRED, otherwise it is OPTIONAL. 6.4 Specifying the HTTP Version 6.4.1 Description Every Binding component MUST indicate what version of HTTP is in use for the operations of the interface that this binding applies to. By default, HTTP/1.1 [IETF RFC 2616] is used. 6.4.2 Relationship to WSDL Component Model The HTTP binding extension specification adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {http version} REQUIRED. A xs:string to the Binding component. The value of this property follows the "." numbering scheme defined in section 3.1 of Hypertext Transfer Protocol -- HTTP/1.1 [IETF RFC 2616]. 6.4.3 XML Representation The XML representation for specifying the HTTP version is an optional attribute information item with the following Infoset properties: • A [local name] of version • A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" • A type of xs:string whose pattern facet is "[0-9]+\.[0-9]+". 6.4.4 Mapping from XML Representation to Component Properties See Table 6-2. Table 6-2. Mapping from XML Representation to Binding component Extension Properties ┌──────────┬──────────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├──────────┼──────────────────────────────────────────────────────────────────┤ │{http │The actual value of the whttp:version attribute information item, │ │version} │if present, otherwise "1.1". │ └──────────┴──────────────────────────────────────────────────────────────────┘ 6.5 Binding Operations 6.5.1 Description This binding extension specification provides a binding to HTTP of Interface Operation components whose {message exchange pattern} property has the value "http://www.w3.org/2006/01/wsdl/in-only", "http://www.w3.org/2006/01/wsdl/ robust-in-only" or "http://www.w3.org/2006/01/wsdl/in-out". This HTTP binding extension MAY be used with other message exchange patterns such as outbound message exchange patterns, provided that additional semantics are defined, such as with an extension or with a Feature. Each of the supported message exchange patterns involves one to two messages or faults being exchanged. The first is transmitted using an HTTP request, and the second is transmitted using the corresponding HTTP response. In cases where only one message is being sent, the message body of the HTTP response MUST be empty. For every Binding Operation component corresponding to such Interface Operation components, this binding extension specification allows the user to indicate the HTTP method to use, the input, output and fault serialization, and the location of the bound operation. 6.5.2 Relationship to WSDL Component Model The HTTP binding extension adds the following properties to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {http location} OPTIONAL. A xs:anyURI, to the Binding Operation component. This IRI is combined with the base IRI specified in the {address} property of the Endpoint component to form the full IRI for the HTTP request to invoke the operation. It MUST contain an absolute or a relative IRI, i.e. it MUST NOT include a fragment identifier in the IRI. Input serializations may define additional processing rules to be applied to the value of {http location} before combining it with the {address} property of the endpoint element to form the HTTP request IRI. For example, the three serialization formats defined in section 6.8 Serialization Format of Instance Data define a syntax to use the {http location} as a template using elements of the instance data. If the resulting IRI uses the https scheme, then HTTP over TLS [IETF RFC 2818] is used to send the HTTP request. • {http method default} OPTIONAL. A xs:string, to the Binding component, indicating the default value for the HTTP Request Method for all the Interface Operation components of any Interface component that uses this Binding component. • {http method} OPTIONAL. A xs:string, to the Binding Operation component, indicating the value for the HTTP Request Method for this specific Binding Operation. • {http input serialization} REQUIRED. A xs:string, to the Binding Operation component, indicating allowed serialization rules of the HTTP Request message for this specific operation, as described in section 6.5.3 Specification of serialization rules allowed. • {http output serialization} REQUIRED. A xs:string, to the Binding Operation component, indicating allowed serialization rules of the HTTP Response message for this specific operation, as described in section 6.5.3 Specification of serialization rules allowed. • {http fault serialization} REQUIRED. A xs:string, to the Binding Operation component, indicating allowed serialization rules of the HTTP Response message for this specific operation in case a fault is returned, as described in section 6.5.3 Specification of serialization rules allowed. • {http query parameter separator default} REQUIRED. A xs:string, to the Binding component, indicating the default query parameter separator character for all the Interface Operation components of any Interface component that uses this Binding component. • {http query parameter separator} OPTIONAL. A xs:string, to the Binding Operation component, indicating the query parameter separator character for this Binding Operation component. 6.5.3 Specification of serialization rules allowed The value of the {http input serialization}, {http output serialization} and { http fault serialization} properties is similar to the value allowed for the Accept HTTP header defined by the HTTP 1.1 specification, Section 14.1 (see [ IETF RFC 2616]) and MUST follow the production rules defined in that section except for the following: 1. The prefix "Accept:" MUST NOT be used. 2. The rule qdtext is changed from: qdtext = > to: qdtext = > This change is made to disallow non-US-ASCII OCTETs. These properties allow to indicate the range of media types and/or associated parameters with which an instance MAY be serialized. The value of the serialization format used for a message is a media type which MUST be covered by this range. Users of this attribute information item are urged to avoid using wild cards (for example, "application/*") as it may lead to interoperability problems. The use of {http input serialization}, {http output serialization} and {http fault serialization} is specified in section 6.3.2 Payload Construction And Serialization Format. 6.5.4 XML Representation The XML representation for binding an Operation are six attribute information items with the following Infoset properties: • An OPTIONAL location attribute information item with the following Infoset properties: □ A [local name] of location □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:anyURI • An OPTIONAL method attribute information item with the following Infoset properties: □ A [local name] of method □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:string • An OPTIONAL inputSerialization attribute information item with the following Infoset properties: □ A [local name] of inputSerialization □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:string • An OPTIONAL outputSerialization attribute information item with the following Infoset properties: □ A [local name] of outputSerialization □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:string • An OPTIONAL faultSerialization attribute information item with the following Infoset properties: □ A [local name] of faultSerialization □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:string • An OPTIONAL queryParameterSeparator attribute information item with the following Infoset properties: □ A [local name] of queryParameterSeparator □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:string whose length facet value is "1" The following attribute information items for the binding element information item are defined: • An OPTIONAL methodDefault attribute information item with the following Infoset properties: □ A [local name] of methodDefault □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:string • An OPTIONAL queryParameterSeparatorDefault attribute information item with the following Infoset properties: □ A [local name] of queryParameterSeparatorDefault □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:string whose length facet value is "1" 6.5.5 Mapping from XML Representation to Component Properties See Table 6-3. Table 6-3. Mapping from XML Representation to Binding Operation component Extension Properties ┌──────────────────┬──────────────────────────────────────────────────────────┐ │ Property │ Value │ ├──────────────────┼──────────────────────────────────────────────────────────┤ │{http location} │The actual value of the whttp:location attribute │ │ │information item, if present. │ ├──────────────────┼──────────────────────────────────────────────────────────┤ │{http method │The actual value of the whttp:methodDefault attribute │ │default} │information item, if present. │ ├──────────────────┼──────────────────────────────────────────────────────────┤ │{http method} │The actual value of the whttp:method attribute information│ │ │item, if present. │ ├──────────────────┼──────────────────────────────────────────────────────────┤ │{http input │The actual value of the whttp:inputSerialization attribute│ │serialization} │information item, if present; otherwise, the default value│ │ │as defined in 6.3 HTTP Binding Rules. │ ├──────────────────┼──────────────────────────────────────────────────────────┤ │{http output │The actual value of the whttp:outputSerialization │ │serialization} │attribute information item, if present; otherwise, the │ │ │default value as defined in 6.3 HTTP Binding Rules. │ ├──────────────────┼──────────────────────────────────────────────────────────┤ │{http fault │The actual value of the whttp:faultSerialization attribute│ │serialization} │information item, if present; otherwise "application/xml".│ ├──────────────────┼──────────────────────────────────────────────────────────┤ │{http query │The actual value of the │ │parameter │whttp:queryParameterSeparatorDefault attribute information│ │separator default}│item, if present; otherwise, "&". │ ├──────────────────┼──────────────────────────────────────────────────────────┤ │{http query │The actual value of the whttp:queryParameterSeparator │ │parameter │attribute information item, if present. │ │separator} │ │ └──────────────────┴──────────────────────────────────────────────────────────┘ 6.6 Declaring HTTP Headers 6.6.1 Description HTTP allows the use of headers in messages. This binding extension allows users to declare the HTTP headers in use on a per message and on a per fault basis. 6.6.2 Relationship to WSDL Component Model The HTTP Header binding extension specification adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {http headers} OPTIONAL. A set of HTTP Header components as defined in 6.6.3 HTTP Header component, to the Binding Message Reference component. • Similarly, {http headers} OPTIONAL, to the Binding Fault component. It is an ERROR for a Binding Message Reference or a Binding Fault component's { http headers} property to contain multiple HTTP Header components with the same {name} property. 6.6.3 HTTP Header component A HTTP Header component describes an abstract piece of header data (HTTP header field) that is associated with the exchange of messages between the communicating parties. The presence of a HTTP Header component in a WSDL description indicates that the service support headers and MAY require a Web service consumer/client that interacts with the service to use the described header field. Zero or one such header field may be used. The properties of the HTTP Header component are as follows: • {name} REQUIRED. A xs:string whose pattern facet is "[!#-'*+\-.0-9A-Z^-z|~] +", the name of the HTTP header field. The value of this property follows the field-name production rules as specified in section 4.2 of [IETF RFC 2616]. • {type definition} REQUIRED. A xs:QName, being a reference to a Type Definition component in the {type definitions} property of the Description component constraining the value of the HTTP header field. This type MUST be a simple type. • {required} REQUIRED. A xs:boolean indicating if the HTTP header field is required. If the value is "true", then the HTTP header field MUST be included in the message. If it is "false", then the HTTP header field MAY be included. • {parent} REQUIRED. The Binding Fault or Binding Message Reference component component that contains this component in its {http headers} property. 6.6.4 XML Representation * * ... * * ... * * ... * * The XML representation for a HTTP Header component is an element information item with the following Infoset properties: • A [local name] of header • A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" • One or more attribute information items amongst its [attributes] as follows: □ A REQUIRED name attribute information item with the following Infoset properties: ☆ A [local name] of name ☆ A [namespace name] which has no value ☆ A type of xs:string whose pattern facet is "[!#-'*+\-.0-9A-Z^-z|~] +". □ A REQUIRED type attribute information item with the following Infoset properties: ☆ A [local name] of type ☆ A [namespace name] which has no value ☆ A type of xs:QName □ An OPTIONAL required attribute information item with the following Infoset properties: ☆ A [local name] of required ☆ A [namespace name] which has no value ☆ A type of xs:boolean □ Zero or more namespace qualified attribute information items. The [namespace name] of such attribute information items MUST NOT be "http: //www.w3.org/2006/01/wsdl" and MUST NOT be "http://www.w3.org/2006/01/ wsdl/http". • Zero or more element information item amongst its [children], in order, as follows: 1. Zero or more documentation element information items as defined in [ WSDL 2.0 Core Language]. 2. Zero or more namespace-qualified element information items amongst its [children]. The [namespace name] of such element information items MUST NOT be "http://www.w3.org/2006/01/wsdl" and MUST NOT be "http:// www.w3.org/2006/01/wsdl/http". 6.6.5 Mapping from XML Representation to Component Properties See Table 6-4. Table 6-4. Mapping from XML Representation to HTTP Header component-related Properties ┌───────────┬─────────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├───────────┼─────────────────────────────────────────────────────────────────┤ │{http │The set of HTTP Header components corresponding to all the header│ │headers} │element information item in the [children] of the fault , input │ │ │or output element information item, if any. │ ├───────────┼─────────────────────────────────────────────────────────────────┤ │{name} │The value of the name attribute information item. │ ├───────────┼─────────────────────────────────────────────────────────────────┤ │{type │The Type Definition component from the {type definitions} │ │definition}│property of the Description component resolved to by the value of│ │ │the type attribute information item. │ ├───────────┼─────────────────────────────────────────────────────────────────┤ │{required} │The actual value of the required attribute information item if │ │ │present, otherwise "false". │ ├───────────┼─────────────────────────────────────────────────────────────────┤ │ │The Binding Fault or Binding Message Reference component │ │{parent} │corresponding to the fault , input or output element information │ │ │item in [parent]. │ └───────────┴─────────────────────────────────────────────────────────────────┘ 6.6.6 IRI Identification Of A HTTP Header component WSDL Version 2.0 Part 1: Core Language [WSDL 2.0 Core Language] defines a fragment identifier syntax for identifying components of a WSDL 2.0 document. An HTTP Header component can be identified using the wsdl.extension XPointer Framework scheme: wsdl.extension(http://www.w3.org/2006/01/wsdl/http, whttp.header(parent/name)) 1. parent is the pointer part of the {parent} component, as specified in WSDL Version 2.0 Part 1: Core Language. 2. name is the {name} property value. 6.7 Specifying HTTP Error Code for Faults 6.7.1 Description For every Interface Fault component contained in an Interface component, an HTTP error code MAY be defined. It represents the error code that will be used by the service in case the fault needs to be returned. The fault definition SHOULD NOT go against the definition of the HTTP error codes, as specified in section 8 of [IETF RFC 3205]. 6.7.2 Relationship to WSDL Component Model The HTTP Fault binding extension adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {http error status code} REQUIRED. A union of xs:int and xs:token where the allowed token value is "#any", to the Binding Fault component. An integer value of this property identifies the error Status-Code as defined by [IETF RFC 2616] that the service will use in case the fault is returned. If the value of this property is "#any", no claim is made by the service. 6.7.3 XML Representation * The XML representation for binding an HTTP Fault are two attribute information items with the following Infoset properties: • a code OPTIONAL attribute information item □ A [local name] of code □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of union of xs:int and xs:token where the allowed token value is "#any" 6.7.4 Mapping from XML Representation to Component Properties See Table 6-5. Table 6-5. Mapping from XML Representation to Binding Fault component Extension Properties ┌────────────────┬────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├────────────────┼────────────────────────────────────────────────────────────┤ │{http error │The actual value of the whttp:code attribute information │ │status code} │item, if present; otherwise "#any". │ └────────────────┴────────────────────────────────────────────────────────────┘ 6.8 Serialization Format of Instance Data This section specifies three serialization formats defining rules to encode an instance data corresponding to an input and output message as an HTTP message. Table 6-6 and Table 6-7 give an overview of those serialization formats and their constraints. All of them allow serialization of parts of the instance data in the HTTP Request IRI, as defined in section 6.8.1 Serialization of the instance data in parts of the HTTP request IRI. Other serialization formats may be defined. Those MAY place restrictions on the style of the Interface Operation bound. Table 6-6. Applicability of the serialization formats defined in this section for this HTTP binding ┌─────────────────────────┬───────────────────────────────────────────────────┐ │ │ Serialization of the instance data in parts of an │ │ │ HTTP message │ │ ├───────┬───────────────────────────────────────────┤ │ - │ │ In the message body │ │ │In the ├─────────────────────┬─────────┬───────────┤ │ │request│ application/ │multipart│application│ │ │ URI │x-www-form-urlencoded│ / │ /xml │ │ │ │ │form-data│ │ ├──────────┬──────────────┼───────┼─────────────────────┼─────────┼───────────┤ │ │ Without │ All, │ │ │ │ │ HTTP │message body: │some or│ - │ - │ - │ │ request │GET, DELETE, …│ none │ │ │ │ │ (input ├──────────────┼───────┼─────────────────────┼─────────┼───────────┤ │ message) │ With message │ All, │ │ │ │ │ │ body: POST, │some or│ Remainder │ All │ All │ │ │ PUT, … │ none │ │ │ │ ├──────────┴──────────────┼───────┼─────────────────────┼─────────┼───────────┤ │ HTTP response (output │ - │ - │ - │ All │ │ message) │ │ │ │ │ └─────────────────────────┴───────┴─────────────────────┴─────────┴───────────┘ Table 6-7. Operation styles required for using serialization formats defined below as input serialization ┌──────────┬──────────────────────────────────────────────────────────────────┐ │ │ Request │ │ ├──────────────────────┬───────────────────────────────────────────┤ │ HTTP │ │ Input serialization │ │ Method │ Request URI: query ├─────────────────────┬─────────┬───────────┤ │ │ parameters or path │ application/ │multipart│application│ │ │ components │x-www-form-urlencoded│ / │ /xml │ │ │ │ │form-data│ │ ├──────────┼──────────────────────┼─────────────────────┼─────────┼───────────┤ │ Without │ │ │ │ │ │ message │ IRI style │ IRI style │ - │ - │ │body: GET,│ │ │ │ │ │DELETE, … │ │ │ │ │ ├──────────┼──────────────────────┼─────────────────────┼─────────┼───────────┤ │ With │IRI style, if any data│ │ │ │ │ message │is serialized as path │ │Multipart│ None │ │ body: │ components or query │ IRI style │ style │ required │ │POST, PUT,│ parameters │ │ │ │ │ … │ │ │ │ │ └──────────┴──────────────────────┴─────────────────────┴─────────┴───────────┘ 6.8.1 Serialization of the instance data in parts of the HTTP request IRI ┌─────────────────────────────────────────────────────────────────────────┬───┐ │Editorial note: URIPath Feedback Requested │ │ ├─────────────────────────────────────────────────────────────────────────┴───┤ │The inclusion of elements of the instance data in the path of the request │ │URI, whilst supported by WSDL 1.1, is not supported by XForms 1.0. Hence this│ │mechanism MAY be removed in a future version of this specification. Feedback │ │on this issue from users and implementers is highly encouraged. │ └─────────────────────────────────────────────────────────────────────────────┘ This section defines templating rules for the {http location} property of the Binding Operation component. It is used by the serialization formats defined in section 6.8 Serialization Format of Instance Data, and MAY be reused by other serialization formats. With this HTTP binding, part of the instance data for HTTP requests MAY be serialized in the HTTP request IRI, and another part MAY be serialized in the HTTP message body. If the {style} property of the Interface Operation bound has a value of "http:/ /www.w3.org/2006/01/wsdl/style/iri" as defined in 4.2 IRI Style, and if the { http location} property of the Binding Operation component is present, the value of the {http location} property component is used as a template which is combined with the {address} property of the endpoint element to form the full IRI to be used in an HTTP request, as specified in section 6.5.2 Relationship to WSDL Component Model. The resulting IRI MUST be mapped to an URI for use in the HTTP Request as per section 3.1 "Mapping of IRIs to URIs" of the IRI specification [IETF RFC 3987]. Additional rules for the serialization of the HTTP request IRI MAY be defined by a serialization format. 6.8.1.1 Construction of the request IRI using the {http location} property The {http location} property, if present, MAY cite local names of elements from the instance data of the message to be serialized in request IRI by enclosing the element name within curly braces (e.g. "temperature/{town}"): • When constructing the request IRI, each pair of curly braces (and enclosed element name) is replaced by the possibly empty single value of the corresponding element. It is an error for this element to carry an xs:nil attribute whose value is "true". • A double curly brace (i.e. "{{" or "}}") MAY be used to include a single, literal curly brace in the request IRI. An element MUST NOT be cited more than once within the {http location} property. Strings enclosed within single curly braces MUST be element names from the instance data of the input message, possibly followed by a slash; any other strings enclosed within single curly braces are a fatal error. 6.8.2 Serialization as "application/x-www-form-urlencoded" This serialization format is designed to allow a client or Web service to produce an IRI based on the instance data of a message and serialize a query string in the HTTP message body as application/x-www-form-urlencoded. It may only be used when binding Interface Operation whose {style} property has a value of "http://www.w3.org/2006/01/wsdl/style/iri" as defined in 4.2 IRI Style, i.e. this serialization format may only be used to serialize the HTTP request corresponding to the initial message of an interface operation. Because the IRI Style constrains the instance data not to contain multiple children elements declared with the same local name, elements can be serialized in the request IRI with their local names unambiguously. For the HTTP binding defined in this section (6. WSDL HTTP Binding Extension), "application/x-www-form-urlencoded" MAY be used as a serialization format for an input message (HTTP Request), but MUST NOT be used as a serialization format for an output or fault message (HTTP Response). 6.8.2.1 Case of elements cited in the {http location} property In this serialization, the rules for constructing the HTTP request IRI using elements cited in the {http location} property defined in 6.8.1 Serialization of the instance data in parts of the HTTP request IRI apply. Additional rules for constructing the HTTP request IRI follow. 6.8.2.2 Serialization of content of the instance data not cited in the {http location} property If not all elements from the instance data are cited in the {http location} property, or if the property is not present on the Binding Operation component, then additional serialization rules apply. The remainder of the instance data is formatted as a query string as defined in 6.8.2.2.1 Construction of the query string. If the HTTP method used for the request does not allow a message body, then this query string is serialized as parameters in the request IRI (see 6.8.2.2.3 Serialization in the request IRI), otherwise it is serialized in the message body (see 6.8.2.2.4 Serialization in the message body). 6.8.2.2.1 Construction of the query string For elements of the instance data not cited in the {http location} property, a query string is constructed as follows. Non-nil elements with a possibly empty single value of the instance data not cited are serialized as query parameters in the order they appear in the instance data. It is an error for the instance data to contain elements with an xs:nil attribute whose value is "true". Each parameter pair is separated by the value of the {http query parameter separator} property, if present, or the value of the {http query parameter separator default} property. • Uncited elements with single values (non-list) are serialized as a single name-value parameter pair. The name of the parameter is the local name of the uncited element, and the value of the parameter is the value of the uncited element. • Uncited elements with list values are serialized as one name-value parameter pair per list value. The name of each parameter is the local name of the uncited element, and the value of each parameter is the corresponding value in the list. The order of the list values is preserved. Example 6-1. Query string generation The following instance data of an input message Fréjus 2006-01-06 C with the following value of the {http location} property: 'temperature/{town}' and the following value of the {http query parameter separator default} property: '&' will produce the following query string: date=2006-01-06&unit=C 6.8.2.2.2 Controlling the serialization of the query string in the request IRI This serialization format adds the following property to the WSDL component model: • {http location ignore uncited} MANDATORY. A xs:boolean. This boolean indicates whether elements not cited in the {http location} property MUST be appended to the request IRI or ignored. If the value of this property is "false", the rules defined in section 6.8.2.2.3 Serialization in the request IRI dictate how to serialize elements not cited in {http location} in the request IRI. Otherwise, those are NOT serialized in the request IRI. The XML representation for this property is an attribute information item with the following Infoset properties: • An OPTIONAL ignoreUncited attribute information item with the following Infoset properties: □ A [local name] of ignoreUncited □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:boolean The mapping from the XML representation to component properties is as follows: Table 6-8. Mapping from XML Representation to Binding Operation component Extension Properties ┌──────────────────┬──────────────────────────────────────────────────────────┐ │ Property │ Value │ ├──────────────────┼──────────────────────────────────────────────────────────┤ │{http location │The actual value of the whttp:ignoreUncited attribute │ │ignore uncited} │information item, if present. Otherwise, "false". │ └──────────────────┴──────────────────────────────────────────────────────────┘ 6.8.2.2.3 Serialization in the request IRI If the HTTP request method used does not allow HTTP message body (e.g. "GET" and "DELETE"), and if the value of the {http location ignore uncited} property is "false", then the following rules apply. If the {http location} property is not present, or if it is present and its value does not contain a "?" (question mark) character, one is appended to the request IRI. If it does already contain a question mark character, then the value of the {http query parameter separator} property, if present, or the value of the {http query parameter separator default} property otherwise, is appended. Finally, the query string computed in 6.8.2.2.1 Construction of the query string is appended. Example 6-2. Instance data serialized in a IRI The instance data defined in Example 6-1 with the following operation declaration: and the following endpoint declaration: will serialize the message in the HTTP request as follows: GET http://ws.example.com/service1/ temperature/Fr%C3%A9jus?date=2006-01-06&unit=C HTTP/1.1 Host: ws.example.com 6.8.2.2.4 Serialization in the message body If the HTTP request method used does allow an HTTP message body (e.g. "POST" and "PUT"), then the following rules apply. Finally, the query string computed in 6.8.2.2.1 Construction of the query string is used as the value of the HTTP message body. The Content-Type HTTP header field must have the value application/ x-www-form-urlencoded. Example 6-3. Instance data serialized in the HTTP Request IRI and message body The instance data defined in Example 6-1 with the following operation declaration: and the following endpoint declaration: will serialize the message in the HTTP request as follow: POST http://ws.example.com/service1/temperature/Fr%C3%A9jus HTTP/1.1 Host: ws.example.com Content-Type: application/x-www-form-urlencoded Content-Length: … date=2006-01-06&unit=C 6.8.3 Serialization as "application/xml" In this serialization, for HTTP requests, the rules for constructing the HTTP request IRI defined in 6.8.1 Serialization of the instance data in parts of the HTTP request IRI apply if the {style} property of the Interface Operation bound has a value of "http://www.w3.org/2006/01/wsdl/style/iri" as defined in 4.2 IRI Style. The instance data of the input, output or fault message is serialized as an XML document in the message body of the HTTP message, following the serialization defined in [Canonical XML]. Therefore, it is only suitable for HTTP requests using methods allowing message bodies (i.e., for the HTTP binding defined in this specification, input messages where the HTTP method selected has a body), and for HTTP responses (i.e. output and fault messages for the HTTP binding defined in this specification). The Content-Type HTTP header MUST have the value application/xml, or a media type compatible with application/xml as specified in section 6.3.2.1 Serialization rules for XML messages. Other HTTP headers, such as Content-Encoding or Transfer-Encoding, MAY be used. 6.8.4 Serialization as "multipart/form-data" In this serialization, for HTTP requests, the rules for constructing the HTTP request IRI defined in 6.8.1 Serialization of the instance data in parts of the HTTP request IRI apply if the {style} property of the Interface Operation bound has a value of "http://www.w3.org/2006/01/wsdl/style/iri" as defined in 4.2 IRI Style. This format is for legacy compatibility to permit the use of XForms clients with [IETF RFC 2388] servers. This serialization format may only be used when binding Interface Operation whose {style} property has a value of "http:// www.w3.org/2006/01/wsdl/style/multipart" as defined in 4.3 Multipart style, i.e. this serialization format may only be used to serialize the HTTP request corresponding to the initial message of an interface operation. Specifically, for the HTTP binding defined in this section (6. WSDL HTTP Binding Extension), "multipart/form-data" MAY be used as a serialization format for an input message (HTTP Request), but MUST NOT be used as a serialization format for an output or fault message (HTTP Response). This format serializes the instance data in the HTTP message body, making it only suitable for HTTP requests using methods allowing message bodies. Each element in the sequence is serialized into a part as follow: 1. The Content-Disposition header MUST have the value form-data, and its name parameter is the local name of the element. 2. The Content-Type header MUST have the value: □ application/xml (or a media type compatible with application/xml) if the element has a complex type; □ application/octet-stream if the element is of type xs:base64Binary, xs:hexBinary, or a derived type; □ text/plain if the element has a simple type; The charset MUST be set appropriately. UTF-8 or UTF-16 MUST be at least supported. 3. If the type is xs:base64Binary, xs:hexBinary, xs:anySimpleType or a derived type, the content of the part is the content of the element. If the type is a complex type, the element is serialized following the rules defined in the 6.8.3 Serialization as application/xml . It is an error for the instance data to contain elements with an xs:nil attribute whose value is "true". Example 6-4. Example of multipart/form-data The following instance data of an input message: Fréjus France 2006-01-06 with the following operation element will serialize the message as follow: Content-Type: multipart/form-data; boundary=AaB03x Content-Length: xxx --AaB03x Content-Disposition: form-data; name="town" Content-Type: application/xml Fréjus France --AaB03x Content-Disposition: form-data; name="date" Content-Type: text/plain; charset=utf-8 2006-01-06 --AaB03x-- 6.9 Specifying the Transfer Coding 6.9.1 Description Every Binding Message Reference and Interface Fault Reference component MAY indicate which transfer codings, as defined in section 3.6 of [IETF RFC 2616], are available for this particular message. The HTTP binding extension provides a mechanism for indicating a default value at the Binding component and Binding Operation levels. If no value is specified, no claim is being made. 6.9.2 Relationship to WSDL Component Model The HTTP binding extension specification adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {http transfer coding default} OPTIONAL. A xs:string to the Binding component. This property indicates the default transfer codings available for all Interface Message Reference and Interface Fault Reference components of any Interface component that uses this Binding component. Its value is ignored when the value of the {http version} property is "1.0". • {http transfer coding default} OPTIONAL. A xs:string to the Binding Operation component. This property indicates the default transfer codings available for all Binding Message Reference and Binding Fault components of this Binding Operation component. Its value is ignored when the value of the {http version} property is "1.0". • {http transfer coding} OPTIONAL. A xs:string to the Binding Message Reference component. This property indicates the transfer codings available for this Binding Message Reference component. Its value is ignored when the value of the {http version} property is "1.0". • Similarly, {http transfer coding} OPTIONAL, to the Binding Fault component 6.9.3 XML Representation * The XML representation for specifying the transfer coding is an OPTIONAL attribute information item for the input , output , and fault element information items with the following Infoset properties: • A [local name] of transferCoding • A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" • A type of xs:string The XML representation for specifying the default transfer coding is an OPTIONAL attribute information item for the binding element information item or binding 's child operation element information items with the following Infoset properties: • A [local name] of transferCodingDefault • A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" • A type of xs:string 6.9.4 Mapping from XML Representation to Component Properties See Table 6-9. Table 6-9. Mapping from XML Representation to Interface Message Reference component Extension Properties ┌───────────────────────────┬─────────────────────────────────────────────────┐ │ Property │ Value │ ├───────────────────────────┼─────────────────────────────────────────────────┤ │{http transfer coding │The actual value of the │ │default} of the Binding │whttp:transferCodingDefault attribute information│ │component │item of the binding element information item, if │ │ │present. │ ├───────────────────────────┼─────────────────────────────────────────────────┤ │{http transfer coding │The actual value of the │ │default} of the Binding │whttp:transferCodingDefault attribute information│ │Operation component │item of the operation element information item, │ │ │if present. │ ├───────────────────────────┼─────────────────────────────────────────────────┤ │{http transfer coding} of │The actual value of the whttp:transferCoding │ │the Binding Message │attribute information item of the input or output│ │Reference component │element information item, if present. │ ├───────────────────────────┼─────────────────────────────────────────────────┤ │{http transfer coding} of │The actual value of the whttp:transferCoding │ │the Binding Fault component│attribute information item of the fault element │ │ │information item, if present. │ └───────────────────────────┴─────────────────────────────────────────────────┘ 6.10 Specifying the Use of HTTP Cookies 6.10.1 Description Every Binding component MAY indicate whether HTTP cookies (as defined by [IETF RFC 2965]) are used for some or all of operations of the interface that this binding applies to. 6.10.2 Relationship to WSDL Component Model The HTTP binding extension specification adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {http cookies} REQUIRED. A xs:boolean to the Binding component. 6.10.3 XML Representation The XML representation for specifying the use of HTTP cookies is an OPTIONAL attribute information item with the following Infoset properties: • A [local name] of cookies • A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" • A type of xs:boolean 6.10.4 Mapping from XML Representation to Component Properties See Table 6-10. Table 6-10. Mapping from XML Representation to Binding component Extension Properties ┌───────────┬─────────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├───────────┼─────────────────────────────────────────────────────────────────┤ │{http │The actual value of the whttp:cookies attribute information item;│ │cookies} │otherwise, "false". │ └───────────┴─────────────────────────────────────────────────────────────────┘ 6.11 Specifying HTTP Access Authentication 6.11.1 Description Every Endpoint component MAY indicate the use of an HTTP access authentication mechanism (as defined by [IETF RFC 2616]) for the endpoint described. This binding extension specification allows the authentication scheme and realm to be specified. 6.11.2 Relationship to WSDL Component Model The HTTP binding extension specification adds the following property to the WSDL component model (as defined in [WSDL 2.0 Core Language]): • {http authentication scheme} OPTIONAL. A xs:token with one of the values "basic" or "digest", to the Endpoint component, corresponding to the HTTP authentication scheme used. When present, this property indicates the authentication scheme in use: "basic" indicates the Basic Access Authentication scheme defined in [IETF RFC 2617], and "digest" indicates the Digest Access Authentication scheme as defined in [IETF RFC 2617]. • {http authentication realm} OPTIONAL. A xs:string to the Endpoint component. It corresponds to the realm authentication parameter defined in [IETF RFC 2617]. If the {http authentication scheme} property is present, then this property MUST be present. 6.11.3 XML Representation whttp:authenticationType="xs:token"? whttp:authenticationRealm="xs:string"? /> The XML representation for specifying the use of HTTP access authentication is two OPTIONAL attribute information items with the following Infoset properties: • An OPTIONAL authenticationType attribute information item with the following Infoset properties: □ A [local name] of authenticationType □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:token where the allowed token values are "basic" and "digest". • An OPTIONAL authenticationRealm attribute information item with the following Infoset properties: □ A [local name] of authenticationRealm □ A [namespace name] of "http://www.w3.org/2006/01/wsdl/http" □ A type of xs:string 6.11.4 Mapping from XML Representation to Component Properties See Table 6-11. Table 6-11. Mapping from XML Representation to Endpoint component Extension Properties ┌──────────────┬──────────────────────────────────────────────────────────────┐ │ Property │ Value │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │{http │The actual value of the whttp:authenticationType attribute │ │authentication│information item, if present. │ │scheme} │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │{http │The actual value of the whttp:authenticationRealm attribute │ │authentication│information item, if present; otherwise, if the │ │realm} │whttp:authenticationType attribute information item is │ │ │present, "" (the empty value). │ └──────────────┴──────────────────────────────────────────────────────────────┘ 6.12 Conformance An element information item whose namespace name is "http://www.w3.org/2006/01/ wsdl" and whose local part is description conforms to this binding extension specification if the element information items and attribute information items whose namespace is http://www.w3.org/2006/01/wsdl/http conform to the XML Schema for that element or attribute as defined by this specification and additionally adheres to all the constraints contained in this specification. 7. References 7.1 Normative References [Canonical XML] Canonical XML, J. Boyer, Author. World Wide Web Consortium, 15 March 2001. This version of the Canonical XML Recommendation is http://www.w3.org/TR/ 2001/REC-xml-c14n-20010315. The latest version of Canonical XML is available at http://www.w3.org/TR/xml-c14n. [IETF RFC 2119] Key words for use in RFCs to Indicate Requirement Levels, S. Bradner, Author. Internet Engineering Task Force, June 1999. Available at http:// www.ietf.org/rfc/rfc2119.txt. [IETF RFC 2388] Returning Values from Forms: multipart/form-data, L. Masinter, Author. Internet Engineering Task Force, August 1998. Available at http:// www.ietf.org/rfc/rfc2388.txt. [IETF RFC 2616] Hypertext Transfer Protocol -- HTTP/1.1, R. Fielding, J. Gettys, J. Mogul, H. Frystyk, L. Masinter, P. Leach, T. Berners-Lee, Authors. Internet Engineering Task Force, June 1999. Available at http://www.ietf.org/rfc/ rfc2616.txt. [IETF RFC 2617] HTTP Authentication: Basic and Digest Access Authentication, J. Franks, P. Hallam-Baker, J. Hostetler, S. Lawrence, P. Leach, A. Luotonen, L. Stewart, June 1999. Available at http://www.ietf.org/rfc/rfc2616.txt. [IETF RFC 2818] HTTP Over TLS, E. Rescorla, Author. Internet Engineering Task Force, May 2000. Available at http://www.ietf.org/rfc/rfc2818.txt. [IETF RFC 2965] HTTP State Management Mechanism, D. Kristol, L. Montulli Authors. Internet Engineering Task Force, October 2000. Available at http://www.ietf.org/rfc/ rfc2965.txt. [IETF RFC 3023] XML Media Types, M. Murata, S. St. Laurent, D. Kohn, Authors. Internet Engineering Task Force, January 2001. Available at http://www.ietf.org/rfc/ rfc3023.txt. [IETF RFC 3205] On the use of HTTP as a Substrate, K. Moore, Authors. Internet Engineering Task Force, February 2002. Available at http://www.ietf.org/rfc/ rfc3205.txt. [IETF RFC 3986] Uniform Resource Identifiers (URI): Generic Syntax, T. Berners-Lee, R. Fielding, L. Masinter, Authors. Internet Engineering Task Force, January 2005. Available at http://www.ietf.org/rfc/rfc3986.txt. [IETF RFC 3987] Internationalized Resource Identifiers (IRIs), M. Duerst, M. Suignard, Authors. Internet Engineering Task Force, January 2005. Available at http:/ /www.ietf.org/rfc/rfc3987.txt. [XForms 1.0] XForms 1.0, M. Dubinko, et al., Editors. World Wide Web Consortium, 14 October 2003. This version of the XForms 1.0 Recommendation is http:// www.w3.org/TR/2003/REC-xforms-20031014/. The latest version of XForms 1.0 is available at http://www.w3.org/TR/xforms/. [SOAP 1.2 Part 1: Messaging Framework] SOAP Version 1.2 Part 1: Messaging Framework, M. Gudgin, M. Hadley, N. Mendelsohn, J-J. Moreau, H. Frystyk Nielsen, Editors. World Wide Web Consortium, 24 June 2003. This version of the "SOAP Version 1.2 Part 1: Messaging Framework" Recommendation is http://www.w3.org/TR/2003/ REC-soap12-part1-20030624/. The latest version of "SOAP Version 1.2 Part 1: Messaging Framework" is available at http://www.w3.org/TR/soap12-part1/. [SOAP 1.2 Part 2: Adjuncts] SOAP Version 1.2 Part 2: Adjuncts, M. Gudgin, M. Hadley, N. Mendelsohn, J-J. Moreau, and H. Frystyk Nielsen, Editors. World Wide Web Consortium, 7 May 2003. This version of the "SOAP Version 1.2 Part 2: Adjuncts" Recommendation is http://www.w3.org/TR/2003/REC-soap12-part2-20030624/. The latest version of "SOAP Version 1.2 Part 2: Adjuncts" is available at http: //www.w3.org/TR/soap12-part2/. [Web Architecture] Architecture of the World Wide Web, Volume One, I. Jacobs, and N. Walsh, Editors. World Wide Web Consortium, 15 December 2004. This version of the "Architecture of the World Wide Web, Volume One" Recommendation is http:// www.w3.org/TR/2004/REC-webarch-20041215/. The latest version of "Architecture of the World Wide Web, Volume One" is available at http:// www.w3.org/TR/webarch/. [Web Services Architecture] Web Services Architecture, David Booth, Hugo Haas, Francis McCabe, Eric Newcomer, Michael Champion, Chris Ferris, David Orchard, Editors. World Wide Web Consortium, 11 February 2004. This version of the "Web Services Architecture" Working Group Note is http://www.w3.org/TR/2004/ NOTE-ws-arch-20040211/. The latest version of "Web Services Architecture" is available at http://www.w3.org/TR/ws-arch/. [WSDL 2.0 Core Language] Web Services Description Language (WSDL) Version 2.0 Part 1: Core Language, R. Chinnici, M. Gudgin, J-J. Moreau, S. Weerawarana, Editors. World Wide Web Consortium, 6 January 2006. This version of the "Web Services Description Language (WSDL) Version 2.0 Part 1: Core Language" Specification is available is available at http://www.w3.org/TR/2006/ CR-wsdl20-20060106. The latest version of "Web Services Description Language (WSDL) Version 2.0 Part 1: Core Language" is available at http:// www.w3.org/TR/wsdl20. [XML 1.0] Extensible Markup Language (XML) 1.0 (Third Edition), T. Bray, J. Paoli, C. M. Sperberg-McQueen, E. Maler, and F. Yergeau, Editors. World Wide Web Consortium, 4 February 2004. This version of the XML 1.0 Recommendation is http://www.w3.org/TR/2004/REC-xml-20040204/. The latest version of "Extensible Markup Language (XML) 1.0" is available at http://www.w3.org/TR /REC-xml. [XML Information Set] XML Information Set (Second Edition), J. Cowan and R. Tobin, Editors. World Wide Web Consortium, 4 February 2004. This version of the XML Information Set Recommendation is http://www.w3.org/TR/2004/REC-xml-infoset-20040204. The latest version of XML Information Set is available at http://www.w3.org /TR/xml-infoset. [XML Schema Structures] XML Schema Part 1: Structures Second Edition, H. Thompson, D. Beech, M. Maloney, and N. Mendelsohn, Editors. World Wide Web Consortium, 28 October 2004. This version of the XML Schema Part 1 Recommendation is http:// www.w3.org/TR/2004/REC-xmlschema-1-20041028. The latest version of XML Schema Part 1 is available at http://www.w3.org/TR/xmlschema-1. [XML Schema Datatypes] XML Schema Part 2: Datatypes Second Edition, P. Byron and A. Malhotra, Editors. World Wide Web Consortium, 28 October 2004. This version of the XML Schema Part 2 Recommendation is http://www.w3.org/TR/2004/ REC-xmlschema-2-20041028. The latest version of XML Schema Part 2 is available at http://www.w3.org/TR/xmlschema-2. 7.2 Informative References [SOAP Message Transmission Optimization Mechanism] SOAP Message Transmission Optimization Mechanism, N. Mendelsohn, M. Nottingham, and H. Ruellan, Editors. World Wide Web Consortium, W3C Recommendation, 25 January 2005. This version of SOAP Message Transmission Optimization Mechanism is http://www.w3.org/TR/2005/ REC-soap12-mtom-20050125/. The latest version of the "SOAP Message Transmission Optimization Mechanism" document is available from http:// www.w3.org/TR/soap12-mtom/. [WSA 1.0 Core] Web Services Addressing 1.0 - Core , M. Gudgin, M. Hadley, Editors. World Wide Web Consortium, 17 August 2005. This version of Web Services Addressing 1.0 - Core is http://www.w3.org/TR/2005/CR-ws-addr-core-20050817 / The latest version of the "Web Services Addressing 1.0 - Core" document is available from http://www.w3.org/TR/ws-addr-core. [WSDL 2.0 Primer] Web Services Description Language (WSDL) Version 2.0 Part 0: Primer , D.Booth, C.K. Liu , Editors. World Wide Web Consortium, 6 January 2006. This version of the "Web Services Description Language (WSDL) Version 2.0 Part 0: Primer" Specification is available at http://www.w3.org/TR/2006/ CR-wsdl20-primer-20060106. The latest version of "Web Services Description Language (WSDL) Version 2.0 Part 0: Primer" is available at http:// www.w3.org/TR/wsdl20-primer. A. Acknowledgements (Non-Normative) This document is the work of the W3C Web Service Description Working Group. Members of the Working Group are (at the time of writing, and by alphabetical order): Charlton Barreto (Adobe Systems Inc.), Allen Brookes (Rogue Wave Softwave), Dave Chappell (Sonic Software), Helen Chen (Agfa-Gevaert N. V.), Roberto Chinnici (Sun Microsystems), Kendall Clark (University of Maryland), Glen Daniels (Sonic Software), Paul Downey (British Telecommunications), Youenn Fablet (Canon), Hugo Haas (W3C), Tom Jordahl (Macromedia), Anish Karmarkar (Oracle Corporation), Jacek Kopecky (DERI Innsbruck at the Leopold-Franzens-Universität Innsbruck, Austria), Amelia Lewis (TIBCO Software, Inc.), Michael Liddy (Education.au Ltd.), Kevin Canyang Liu (SAP AG), Jonathan Marsh (Microsoft Corporation), Josephine Micallef (SAIC - Telcordia Technologies), Jeff Mischkinsky (Oracle Corporation), Dale Moberg (Cyclone Commerce), Jean-Jacques Moreau (Canon), Mark Nottingham (BEA Systems, Inc.), David Orchard (BEA Systems, Inc.), Vivek Pandey (Sun Microsystems), Bijan Parsia (University of Maryland), Gilbert Pilz (BEA Systems, Inc.), Tony Rogers (Computer Associates), Arthur Ryman (IBM), Adi Sakala (IONA Technologies), Asir Vedamuthu (Microsoft Corporation), Sanjiva Weerawarana (WSO2), Ümit Yalçınalp (SAP AG). Previous members were: Lily Liu (webMethods, Inc.), Don Wright (Lexmark), Joyce Yang (Oracle Corporation), Daniel Schutzer (Citigroup), Dave Solo (Citigroup), Stefano Pogliani (Sun Microsystems), William Stumbo (Xerox), Stephen White (SeeBeyond), Barbara Zengler (DaimlerChrysler Research and Technology), Tim Finin (University of Maryland), Laurent De Teneuille (L'Echangeur), Johan Pauhlsson (L'Echangeur), Mark Jones (AT&T), Steve Lind (AT&T), Sandra Swearingen (U.S. Department of Defense, U.S. Air Force), Philippe Le Hégaret (W3C), Jim Hendler (University of Maryland), Dietmar Gaertner (Software AG), Michael Champion (Software AG), Don Mullen (TIBCO Software, Inc.), Steve Graham (Global Grid Forum), Steve Tuecke (Global Grid Forum), Michael Mahan (Nokia), Bryan Thompson (Hicks & Associates), Ingo Melzer (DaimlerChrysler Research and Technology), Sandeep Kumar (Cisco Systems), Alan Davies (SeeBeyond), Jacek Kopecky (Systinet), Mike Ballantyne (Electronic Data Systems), Mike Davoren (W. W. Grainger), Dan Kulp (IONA Technologies), Mike McHugh (W. W. Grainger), Michael Mealling (Verisign), Waqar Sadiq (Electronic Data Systems), Yaron Goland (BEA Systems, Inc.), Ümit Yalçınalp (Oracle Corporation), Peter Madziak (Agfa-Gevaert N. V.), Jeffrey Schlimmer (Microsoft Corporation), Hao He (The Thomson Corporation), Erik Ackerman (Lexmark), Jerry Thrasher (Lexmark), Prasad Yendluri (webMethods, Inc.), William Vambenepe (Hewlett-Packard Company), David Booth (W3C), Sanjiva Weerawarana (IBM), Charlton Barreto (webMethods, Inc.), Asir Vedamuthu (webMethods, Inc.), Igor Sedukhin (Computer Associates), Martin Gudgin (Microsoft Corporation), Rebecca Bergersen (IONA Technologies), Ugo Corda (SeeBeyond). The people who have contributed to discussions on www-ws-desc@w3.org are also gratefully acknowledged. B. Component Summary (Non-Normative) Table B-1 lists all the components in the WSDL 2.0 Adjuncts abstract Component Model, and all their properties. Table B-1. Summary of WSDL 2.0 Adjuncts Components and their Properties ┌──────────────┬──────────────────────────────────────────────────────────────┐ │ Component │ Defined Properties │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │ │{http transfer coding default}, {http cookies}, {http method │ │Binding │default}, {http query parameter separator default}, {http │ │ │version}, {soap mep default}, {soap modules}, {soap underlying│ │ │protocol}, {soap version} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │ │{http error status code}, {http headers}, {http transfer │ │Binding Fault │coding}, {soap fault code}, {soap fault subcodes}, {soap │ │ │headers}, {soap modules} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │Binding Fault │{soap modules} │ │Reference │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │Binding │{http headers}, {http transfer coding}, {soap headers}, {soap │ │Message │modules} │ │Reference │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │ │{http location}, {http transfer coding default}, {http fault │ │Binding │serialization}, {http input serialization}, {http location │ │Operation │ignore uncited}, {http method}, {http output serialization}, {│ │ │http query parameter separator}, {soap action}, {soap mep}, { │ │ │soap modules} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │Endpoint │{http authentication realm}, {http authentication scheme} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │HTTP Header │{name}, {parent}, {required}, {type definition} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │Interface │{rpc signature}, {safety} │ │Operation │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │SOAP Header │{element declaration}, {mustUnderstand}, {parent}, {required} │ │Block │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │SOAP Module │{parent}, {ref}, {required} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │ Property │ Where Defined │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │element │SOAP Header Block.{element declaration} │ │declaration │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http │ │ │authentication│Endpoint.{http authentication realm} │ │realm │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http │ │ │authentication│Endpoint.{http authentication scheme} │ │scheme │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http cookies │Binding.{http cookies} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http error │Binding Fault.{http error status code} │ │status code │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http fault │Binding Operation.{http fault serialization} │ │serialization │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http headers │Binding Fault.{http headers}, Binding Message Reference.{http │ │ │headers} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http location │Binding Operation.{http location ignore uncited} │ │ignore uncited│ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http method │Binding Operation.{http method} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http method │Binding.{http method default} │ │default │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http output │Binding Operation.{http output serialization} │ │serialization │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http query │ │ │parameter │Binding Operation.{http query parameter separator} │ │separator │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http transfer │Binding Fault.{http transfer coding}, Binding Message │ │coding │Reference.{http transfer coding} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │http version │Binding.{http version} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │mustUnderstand│SOAP Header Block.{mustUnderstand} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │name │HTTP Header.{name} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │parent │HTTP Header.{parent}, SOAP Header Block.{parent}, SOAP Module.│ │ │{parent} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │ref │SOAP Module.{ref} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │required │HTTP Header.{required}, SOAP Header Block.{required}, SOAP │ │ │Module.{required} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │rpc signature │Interface Operation.{rpc signature} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │safety │Interface Operation.{safety} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │soap action │Binding Operation.{soap action} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │soap fault │Binding Fault.{soap fault code} │ │code │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │soap fault │Binding Fault.{soap fault subcodes} │ │subcodes │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │soap headers │Binding Fault.{soap headers}, Binding Message Reference.{soap │ │ │headers} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │soap mep │Binding Operation.{soap mep} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │ │Binding.{soap modules}, Binding Fault.{soap modules}, Binding │ │soap modules │Fault Reference.{soap modules}, Binding Message Reference.{ │ │ │soap modules}, Binding Operation.{soap modules} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │soap │ │ │underlying │Binding.{soap underlying protocol} │ │protocol │ │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │soap version │Binding.{soap version} │ ├──────────────┼──────────────────────────────────────────────────────────────┤ │type │HTTP Header.{type definition} │ │definition │ │ └──────────────┴──────────────────────────────────────────────────────────────┘ C. Part 2 Change Log (Non-Normative) ┌────────┬──────┬─────────────────────────────────────────────────────────────┐ │ Date │Author│ Description │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051122│HH │LC359: moved transfer coding from binding fault ref to │ │ │ │binding fault in XML representations │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051117│JJM │LC358: fixed formatting in some examples. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051113│HH │LC359: moved transfer coding from binding fault ref to │ │ │ │binding fault │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051111│HH │Added SOAP MEP / WSDL MEP mapping as per resolution │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051111│HH │LC333: implemented resolution to accommodate interfaceless │ │ │ │bindings │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051111│HH │LC362: added URI to fault propagation rules │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051111│HH │LC337: added media type range │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051111│HH │LC305: added reference to BNF pseudo-schemas in Part 1 │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051111│AGR │Added assertion tables. Added Fault Propagation Rule │ │ │ │assertions. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051110│HH │LC304: implemented proposal │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051110│HH │LC345: allowed POST as application/x-www-form-urlencoded and │ │ │ │reorganized HTTP binding serializations │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051109│HH │LC301: specified that {soap action} is for the initial │ │ │ │message of an operation │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051027│HH │LC339: added required attribute to wsoap:header and │ │ │ │whttp:header │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051027│HH │LC340: clarified cardinality of headers │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │LC331: if the {message content model} property is "#any" in │ │20051027│HH │the HTTP binding, then the payload MUST be any one XML │ │ │ │element. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051027│HH │LC330: operation styles mandate that the {message content │ │ │ │model} of the operation's messages is "#element" │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051027│HH │LC329: we do now have default rules for binding faults │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051027│HH │LC327: made both HTTP authentication properties optional │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051027│HH │LC326: changed type of {http authentication scheme} │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051027│HH │LC315: fixed HTTP header serialization and IRI │ │ │ │identification. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051020│HH │LC319: implemented detailed resolution. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051020│HH │LC342: fixed typos │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051020│HH │LC349: improved section 2's introduction │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051013│HH │LC334: removed HTTP error reason phrase │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051013│HH │Fixed mark-up for declaring {soap modules}, {soap headers} │ │ │ │and {http headers} │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051013│HH │LC323: removed text on HTTP Accept headers. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051013│HH │LC321: clarified {soap mep} error. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20051012│RRC │LC344(5): changed order of union member types in the schema │ │ │ │for the wrpc:signature extension │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC341: renamed {element} into {element declaration} and fixed│ │ │ │typo │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC318: reorganized default declarations in bindings │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC320: added {parent} property to nested components │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC317: clarified applicability of application/ │ │ │ │x-www-url-encoded and multipart/form-data │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC314: completed introduction │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC306: wsdlx declaration clarification. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC322: section 6.3 Default Binding Rules clarification. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC324: fixed queryParameterSeparatorDefault and │ │ │ │queryParameterSeparator definitions. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC325: fixed typo in transferCodingDefault definition. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │LC313: made {soap action}, {http location}, {http error │ │20050923│HH │reason phrase}, {http transfer coding} properties optional; │ │ │ │did not do {soap fault subcodes} because of LC319. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050923│HH │LC312: fixed typo in Section 2. Predefined Message Exchange │ │ │ │Patterns. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050902│RRC │LC316: Added definition of wrpc namespace in section 1.1 and │ │ │ │changed wording of reference to example 4-1 in section 4.1. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050728│HH │LC76d: spelled out conflict between mustUnderstand use and │ │ │ │schema definition; clarified mustUnderstand definition. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050728│HH │Clarified {soap action} scope for SOAP 1.2 binding. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050728│HH │LC76c: added security consideration section. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050725│RRC │LC75f: allowed extension attributes on RPC-style input/output│ │ │ │elements. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050707│aal │Modified 2.2.2 per text supplied by Jean-Jacques. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050616│AGR │Fixed component table. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Added markup to list all the components and properties used │ │20050616│JJM │in Part 2 (although this currently [wrongly] shows those of │ │ │ │Part 1). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050616│JJM │Fixed wrong component names for properties. Renamed HTTP │ │ │ │Header Block to HTTP Header. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050614│RRC │LC76a: Added comment requested by reviewer. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050615│JJM │Further pass at adding markup for properties. Fixed issues │ │ │ │with entities preventing validation. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050615│JJM │Added and markup around properties. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050614│JJM │Finished adding markup around components. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050613│JJM │Started adding markup around components. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050613│JJM │LC122: replaced "binding" by "binding extension" where │ │ │ │appropriate. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050613│JJM │LC98: {soap mep} only applies to SOAP 1.2. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050613│RRC │LC74c: changed documentation element cardinality to zero or │ │ │ │more. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050606│HH │LC79 & LC102: added editors note about one-way MEP defaulting│ │ │ │for SOAP 1.2 │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050606│HH │LC130: wsoap:code is now optional, and aligned whttp:code │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050602│HH │LC75c: introduced wsdlx namespace, moved safety to Part 2. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050527│HH │LC74a: switched to IRIs │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050527│HH │LC80: defined fragment identifiers for defined components as │ │ │ │proposed │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050520│JJM │LC97: Fixed specifying default values throughout the spec. │ │ │ │Resolved incoherencies along the way. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050519│aal │added template to guide readers when defining new message │ │ │ │exchange patterns. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050512│HH │LC110: referenced RFC2616 for whttp:version │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050512│HH │LC77a: clarified namespace and local name serialization in │ │ │ │application/x-www-url-encoded serialization │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │LC118: Added clarification to step 2 of the algorithm to │ │20050509│RRC │compute the function signature for an operation that uses the│ │ │ │wrpc:signature extension. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050509│RRC │LC89a: Added conformance requirement for RPC style. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050505│aal │LC52c: state that soap faults have no reasonable default. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050505│aal │LC76a: allow extensions to override faults in rulesets; │ │ │ │LC76b: define "propagate" in rulesets. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050429│RRC │LC97: Made the setting of default values for properties more │ │ │ │consistent. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050429│RRC │LC75g: RPC should allows element wildcards │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050422│HH │LC75d: RPC style; same input and output elements need named │ │ │ │type │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050420│JJM │Fixed typos in RPC section (part of LC78). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050413│AV │LC76d: made changes to wsoap:header and whttp:header (removed│ │ │ │required and changed default binding rules) │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050412│RRC │LC75h: added note on multiple return values in rpc style │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050415│HH │LC28: ignoring transfer coding for HTTP/1.0 │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050408│HH │LC17: added order preservation in application/ │ │ │ │x-www-url-encoded serialization │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050408│HH │LC69a: added whttp:queryParameterSeparator │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050408│HH │LC47: added whttp:reasonPhrase │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050408│HH │LC76d: added whttp:header │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050408│HH │Added wsoap:module at the Binding Fault component model as │ │ │ │per 2005-04-07 telcon │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050407│HH │LC7: fixed RPC style glitches │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050406│HH │LC76d: added wsoap:header │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050331│HH │LC106: URI and Multipart styles are placing restrictions on │ │ │ │the initial message of the MEP │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050331│HH │LC111: added reference to section 8 of RFC3205 for use of │ │ │ │HTTP error codes │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050321│HH │LC48b: added link between WSDL and SOAP 1.2 MEPs in │ │ │ │predefined MEPs section │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050321│HH │LC74d: removed constraint on LocalPart of the output element │ │ │ │in RPC style │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050321│HH │LC108: fixed typo and added missing {soap modules} XML │ │ │ │mapping │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050321│HH │LC88: fixed typo │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050317│HH │LC61a: Incorporated RPC style │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050316│HH │LC61a: Merged the old part 2 and part 3 documents │ └────────┴──────┴─────────────────────────────────────────────────────────────┘ C.1 WSDL 2.0 Extensions Change Log ┌────────┬──────┬─────────────────────────────────────────────────────────────┐ │ Date │Author│ Description │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050613│JJM │LC122: Replaced "binding" by "binding extension" where │ │ │ │appropriate. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050222│aal │Implement editorial changes for LC39, LC40, LC48c. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050220│AGR │LC50: Adopt proposal for definition of "node", adding "Note:"│ │ │ │before second sentence. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041209│aal │add clarifying language for fault propagation, per LC54/76. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040713│aal │implement editorial changes requested after review by GlenD, │ │ │ │in application data feature and module. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │address issues 233 & 112 all at once, by increasing level of │ │20040713│aal │all divs, adding new intro div, adding new div to contain │ │ │ │features, renaming spec. Lotsa changes, what fun. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040713│aal │s/Label/Message Label/g and s/{label}/{message label}/g. │ │ │ │issue 230. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │replace "fault generation" with "fault propagation" (in │ │20040713│aal │almost all cases; one case of "generate" remains to indicate │ │ │ │that it ends an exchange). issue 234. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │add language to introduction describing relationship between │ │20040713│aal │these MEPs and the MEPs defined by SOAP 1.2 (issue 232). This│ │ │ │replaces the language found two items down (issue 191). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040713│aal │add (hereafter, simply 'patterns') to intro (issue 231). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040610│aal │add language to introduction describing relationship between │ │ │ │these MEPs and the MEPs defined by SOAP 1.2 (issue 191). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040225│aal │add in-optional-out per minutes of 20 feb 2004 telecon │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040212│aal │change {messageReference} to {label} and "Message Reference │ │ │ │component" to "Label component" per 20040212 teleconference │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040205│aal │change all 'A' and 'B' message labels into 'Out' or 'In', │ │ │ │depending upon direction. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040205│aal │s/message pattern/message exchange pattern/gi │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031204│jcs │Removed change marks; note that some were on div2 tag and did│ │ │ │not show when transformed into HTML. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031204│jcs │Per 4 Dec 2003 telecon, decided to rename 'Asynchronous │ │ │ │Out-In' pattern to 'Output-Optional-Input'. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031105│aal │Fix titles of added patterns. Move them to be in conjunction │ │ │ │with similar patterns. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Per action item from October 16 teleconference, added the │ │20031022│aal │three patterns using message-triggers-fault as published on │ │ │ │the mailing list (robust-in-only, robust-out-only, │ │ │ │asynch-out-in). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031022│aal │Added internal linkage (using specref) from patterns to the │ │ │ │fault rulesets which they use. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031022│aal │Per 9 and 16 Oct 2003 teleconferences, marked in-multi-out │ │ │ │and out-multi-in patterns deleted. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031022│aal │Per 16 Oct 2003 teleconference, added a paragraph/sentence │ │ │ │stating that generation of a fault terminates an exchange. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031007│JCS │Per 2 Oct 2003 teleconference, changed "broadcast" to │ │ │ │"multicast" in the introduction. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Per 22 Sep 2003 meeting in Palo Alto, CA, removed "Pattern │ │20030922│JCS │Review" editorial note; added specific editorial notes for │ │ │ │In-Multi-Out and Out-Multi-In. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030911│RRC │Changed the "name" property of the message reference │ │ │ │component to "messageReference". │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030904│JCS │Incorporated clarifications suggested by W3C\David Booth. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030801│JCS │Per 30 July meeting, added recommendations from patterns task│ │ │ │force. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030612│AAL │Added fault generation rulesets and references to them from │ │ │ │patterns. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030313│MJG │Changed to Part 2 ( from Part 3 ) │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030306│JCS │Proposed name for MEP7. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Per 4 Mar 03 meeting, renamed 'message exchange pattern' to │ │20030305│JCS │'message pattern' or 'pattern', added pattern for │ │ │ │request-response, added ednote about review of patterns. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030217│MJG │Fixed some issues with entities and validity errors WRT │ │ │ │ulists │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030212│JCS │Initial draft │ └────────┴──────┴─────────────────────────────────────────────────────────────┘ C.2 WSDL 2.0 Bindings Change Log ┌────────┬──────┬─────────────────────────────────────────────────────────────┐ │ Date │Author│ Description │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050310│JJM │Replaced with . │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050310│JJM │Fixed missing fault pseudo-schema. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050301│RRC │LC55: enabled use of whttp:transferCoding on Binding Fault │ │ │ │Reference components. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050301│RRC │LC55: enabled use of wsoap:module on Binding Fault Reference │ │ │ │components. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050221│HH │LC48b: highlighted relationship between SOAP and WSDL MEPs │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050211│HH │LC49: added conformance section to each of the bindings │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050120│HH │LC75q: removed wsdls namespace and XML 1.1 reference; │ │ │ │limiting to XML 1.0 │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20050120│HH │LC21: implemented resolution from 16 Dec 2004 WS Description │ │ │ │WG telcon │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041209│HH │LC86: completed pseudo-schemas with missing F&P occurrences │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041209│HH │LC85: clarified mapping of messages in an operation to HTTP │ │ │ │request/response │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041209│HH │LC30: removed instances of provider/requester agents and │ │ │ │replaced them by HTTP server/client │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041209│HH │LC29d: clarified modification of default of SOAP │ │ │ │serialization rules │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Introduced SOAP version independent WSDL SOAP Binding. Added │ │20041208│AV │two new sections, "Specifying the SOAP Version" and "SOAP 1.2│ │ │ │Binding". Plus, lots of shuffling. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041027│HH │LC57 &LC58: fixed typos │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041027│HH │LC51 │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041027│HH │LC45: {http location} may or may not be a template │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041027│HH │LC44: URL serialization expressed in terms of the component │ │ │ │model │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041027│HH │LC29e: URL serialization: disallowing nil elements in certain│ │ │ │cases; clarifying that empty elements are OK │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041001│HH │LC29g: switched 3.8 (serializations) and 3.9 (styles) │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041001│HH │LC29f: it is an error to have nil elements in an instance │ │ │ │data for multipart/form-data │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041001│HH │LC29a & LC29c: indicated that there is no suitable default │ │ │ │fault code │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20041001│HH │LC15: moved {http location} under bulleted list in section 2 │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040920│HH │LC36 & LC2: added wsdls:* and xs:* in SOAP binding │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040920│HH │LC32: fixed errors due to operation name restriction in │ │ │ │serialization examples │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040920│HH │LC36: added wsdls:* and xs:* in HTTP binding │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040920│HH │LC37: corrected rules to set operation properties values in │ │ │ │HTTP binding │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040920│HH │LC33: removed "default" in SOAP binding's HTTP method │ │ │ │selection │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040920│HH │LC13: removed remaining mentions of HTTP Operation Component │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040920│HH │LC12: added whttp:location in SOAP XML summary │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040909│HH │LC10: fixed typo in example 3.3 │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040909│HH │LC11: made default attributes consistent with the following │ │ │ │form: wbinding:fooDefault │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040730│HH │Removed property on wsoap:module in pseudo-schema. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040730│HH │Removed AD Feature HTTP serialization. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040729│HH │Added AD Feature support in HTTP binding. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040727│HH │Clarified interaction between SOAP binding and HTTP binding │ │ │ │properties │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040727│HH │Renamed http prefix whttp │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040727│SW │Implemented Umit's proposal to mark MTOM as one optimization │ │ │ │mechanism. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040726│HH │Restricted URI style with regards to QNames and added │ │ │ │trailing / in URL-encoded syntax │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040723│HH │Addressed issue 246: limited MEP to In-Out, In-Only and │ │ │ │Robust In-Only │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040723│HH │Addressed issue 226. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Addressed 249: major reorganization of the HTTP binding to be│ │20040723│HH │presented in a functional way like the SOAP binding rather │ │ │ │than in a syntactical way. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Moved SOAP binding syntax summary to the top per request. │ │20040722│SW │Also fixed the value of the binding/@type property in the │ │ │ │pseudo-schema to show that its a SOAP binding. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Added HTTP error code attribute on fault binding. Added │ │20040722│HH │relationship between instance data and properties in the │ │ │ │component model. Addresses issue 166. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040722│HH │Renamed SOAP protocol into underlying protocol. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040721│HH │Set the {type} property of binding for HTTP binding. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040721│HH │Fixes for issue 177. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040720│HH │Cross-referenced Part 1 properties. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Specified default serialization format for HTTP binding, as │ │20040720│HH │well as made clear how the defined serialization formats │ │ │ │apply constraints on interface operation styles │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040705│JJM │Added note to indicate only one element per SOAP body. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040702│SW │Corrected how the SOAP binding is indicated .. I had │ │ │ │forgotten about binding/@type! │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040625│SW │Made pseudo-syntax consistent with part1 │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040624│SW │Update the rest of the SOAP binding stuff and consistified │ │ │ │everything. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040624│SW │Cleaned up how SOAP modules were described. Added default │ │ │ │SOAP MEP stuff. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040623│SW │Added default binding rules about HTTP URI generation. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040623│SW │Added default binding rules about SOAP MEP selection and HTTP│ │ │ │Method selection. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040623│SW │Fixed up soapaction default rules │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040623│SW │Allowed use of MTOM for payload serialization │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040623│SW │Fixed up the wsoap:protocol section │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040618│SW │Re-introduced AII and EII entity refs. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040618│SW │Made soap:module compose with nearest-wins rule. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040606│DO │Cleanup on http binding section - had missed some properties.│ │ │ │completed removal of @separator │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Major rewrite of http binding. Moved to component model, │ │20040604│DO │added http properties, added input/output serialization, │ │ │ │removed @separator, added self as editor │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040526│SW │Removed wsoap:address │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040526│SW │Editorial/small corrections per F2F decisions │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040526│SW │Made soap binding be mostly attribute based per F2F decision │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│SW │removed spurious fault element inside binding/operation/ │ │ │ │{in,out}put from syntax summary │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│SW │Put in wsoap:module at operation level in the syntax summary │ │ │ │(was missing) │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│SW │Removed old SOAP binding text │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│SW │Removed wsoap:header │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│JJM │Added SOAP Address section │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│JJM │Added SOAP Operation section │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│JJM │Replace reference to "XML" by "XML1.0" │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│JJM │Added SOAP Fault section │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│JJM │Added SOAP Header section │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040519│JJM │Added SOAP Module section │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040516│SW │Finished writing up soap:binding │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040516│SW │Added myself as an editor. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040514│SW │Added default binding rules. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040514│SW │Commented out old totally out of date SOAP binding. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040514│JJM │Rework the binding and module sections. Reindent to match the│ │ │ │structure of the HTTP binding. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040511│JJM │Updated SOAP binding pseudo-schema, according to telcon │ │ │ │20040506. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040511│JJM │Updated SOAP binding introduction. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040401│JJM │Fixed one remaining occurrence of "verb" (instead of │ │ │ │"method"). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040326│JJM │Sanitized ednotes. Added new ednotes indicating the SOAP │ │ │ │binding needs work and the HTTP binding is (mostly) OK. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040326│JJM │Added Philippe's note on URIPath, as per telcon 20040325. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040305│JJM │Removed the archaic MIME binding, now superseded by the HTTP │ │ │ │binding anyway. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20040305│JJM │Included Philippe's changes to the HTTP binding. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031103│JJM │Fix new non-normative SOAP binding pseudo-schema. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031102│SW │Updated SOAP binding. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20031102│SW │Change 1.2 to 2.0 per WG decision to rename. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030606│JJM │Replaced by . Indicated that pseudo-schemas are not│ │ │ │normative │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030604│JJM │Reformated pseudo-syntax elements to match Part 1 layout │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030529│JCS │Incorporated text to resolve Issue 6e │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030523│JJM │Commented out MIME binding example; this is primer stuff. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030523│JJM │Added pseudo-syntax to all sections. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030523│JJM │Started converting the fault and headerfault sections to │ │ │ │component model. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030523│JJM │Complete the Multipart and x-www-form-urlencoded sections. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030523│JJM │Fixed typos in HTTP binding (in particular added NOT in some │ │ │ │section headers). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030522│JCS │Added rules for serializing HTTP response │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030522│JCS │Added cardinality to pseudo schema for HTTP binding │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030522│JCS │Changes @transport to @protocol for SOAP binding │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030522│JJM │Incorporated remaining text from Philippe into the HTTP │ │ │ │binding. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030522│JJM │Polished the HTTP binding, split into subsections, added │ │ │ │double curly brace escape mechanism, removed pseudo-schema. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030521│JCS │Added rules for @verbDefault/@verb and @location. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Start converting the HTTP binding to the component model. The│ │20030514│JJM │next thing to do will be to remove http:urlReplacement, etc. │ │ │ │and incorporate instead Philippe's text. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030313│MJG │Changed to Part 3 ( from Part 2 ) │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030117│JCS │Incorporated resolution for Issue 5 (@encodingStyle). │ │ │ │Referenced (rather than in-lined XML Schema). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030117│JJM │Various editorial fixes. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030116│JCS │Updated pseudo and XML Schema. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030116│JJM │Added propertyConstraint section. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030116│JJM │Added soap:module section. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Incorporated resolutions for Issue 25 (drop @use and │ │ │ │@encoding), Issue 51 (headers reference element/type), and │ │ │ │attribute roll up into text and schema. Began reworking SOAP │ │20030115│JCS │HTTP binding to use Infoset model. Removed informative │ │ │ │appendices 'Notes on URIs' and example WSDL documents; expect│ │ │ │them to appear in the primer. Updated SOAP 1.2 references to │ │ │ │CR. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030114│JJM │Removed ednote saying Part 2 is out of synch with Part 1. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030111│JJM │Incorporated resolution for issue 17 (role AII). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20030109│JJM │Incorporated resolution for issue 4 (Namespaces). │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020702│JJM │Added summary to prefix table. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020628│JJM │Added out-of-synch-with-Part2 and not-soap12-yet ednote. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020621│JJM │Commented out the link to the previous version. There is no │ │ │ │previous version for 1.2 right now. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020621│JJM │Rewrote the Notation Conventions section. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020621│JJM │Added reference to part 0 in introduction. Renumbered │ │ │ │references. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020621│JJM │Simplified abstract and introduction. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020621│JJM │Obtain the list of WG members from a separate file. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020621│JJM │Updated stylesheet and DTDs to latest XMLP stylesheet and │ │ │ │DTDs. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Deleted placeholder for appendix C "Location of Extensibility│ │20020621│JJM │Elements", since this is part 1 stuff and extensibility has │ │ │ │been reworked anyway. │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020621│JJM │Corrected link to issues lists │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │ │ │Updated title from "WSDL" to "Web Services Description │ │20020621│JJM │Language". Now refer to part 1 as "Web Services... Part 1: │ │ │ │Framework │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020621│JJM │Added Jeffrey as an editor :-). Removed Gudge (now on Part 2)│ │ │ │:-( │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020411│JJM │Fixed typos noticed by Kevin Liu │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020301│JJM │Converted the "Schemas" sections │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020301│JJM │Converted the "Wire WSDL examples" sections │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020301│JJM │Converted the "Notes on URIs" sections │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020301│JJM │Converted the "Notational Conventions" sections │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020301│JJM │Converted the "References" sections │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020301│JJM │Converted the "MIME Binding" section to XML │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020221│JJM │Converted the "HTTP Binding" section to XML │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020221│JJM │Added placeholders for the "Wire examples" and "Schema" │ │ │ │sections │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020221│JJM │Converted the "SOAP Binding" section to XML │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020221│JJM │Added the Change Log │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020221│JJM │Added the Status section │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020221│JJM │Simplified the introduction; referred to Part1 for a longer │ │ │ │introduction │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020221│JJM │Renamed to "Part 2: Bindings" │ ├────────┼──────┼─────────────────────────────────────────────────────────────┤ │20020221│JJM │Created from http://www.w3.org/TR/2001/NOTE-wsdl-20010315 │ └────────┴──────┴─────────────────────────────────────────────────────────────┘