[W3C]
Web Services Description Language (WSDL) Version 1.2 Part 3: Bindings
W3C Working Draft 11 June 2003
This version:
http://www.w3.org/TR/2003/WD-wsdl12-bindings-20030611
Latest version:
http://www.w3.org/TR/wsdl12-bindings
Previous versions:
http://www.w3.org/TR/2003/WD-wsdl12-bindings-20030124
Editors:
Jean-Jacques Moreau, Canon
Jeffrey Schlimmer, Microsoft
This document is also available in these non-normative formats: postscript,
PDF, XML, and plain text.
Copyright © 2003 W3C® (MIT, ERCIM, Keio), All Rights Reserved. W3C
liability, trademark, document use and software licensing rules apply.
----------------------------------------------------------------------------
Abstract
WSDL is an XML format for describing network services as a set of endpoints
operating on messages containing either document-oriented or
procedure-oriented information. WSDL Version 1.2 Bindings describes how to
use WSDL in conjunction with SOAP 1.2 [SOAP 1.2 Part 1: Messaging
Framework], HTTP/1.1 GET/POST [IETF RFC 2616], and MIME [IETF RFC 2045].
This specification depends on WSDL Version 1.2 [WSDL 1.2 Core Language].
Status of this Document
This section describes the status of this document at the time of its
publication. Other documents may supersede this document. The latest status
of this document series is maintained at the W3C.
This is a W3C Working Draft of the WSDL Version 1.2 Bindings specification
for review by W3C members and other interested parties.
This document has been produced as part of the W3C Web Services Activity.
The authors of this document are the Web Services Description Working Group
members.
This is a draft document and may be updated, replaced or obsoleted by other
documents at any time. It is inappropriate to use W3C Working Drafts as
reference material or to cite them as other than "work in progress". This is
work in progress and does not imply endorsement by, or the consensus of,
either W3C or members of the Web Services Description Working Group.
For a detailed list of changes since the last publication of this document,
refer to appendix B. Part 2 Change Log.
Comments on this document are invited and are to be sent to
public-ws-desc-comments@w3.org (public archive). It is inappropriate to send
discussion emails to this address. Discussion of this document takes place
on the public www-ws-desc@w3.org mailing list (public archive).
Patent disclosures relevant to this specification may be found on the
Working Group's patent disclosure page.
A list of current W3C Recommendations and other technical documents can be
found at http://www.w3.org/TR.
----------------------------------------------------------------------------
Short Table of Contents
1. Introduction
2. WSDL SOAP Binding
3. WSDL HTTP Binding
4. MIME Binding
5. References
A. Acknowledgements (Non-Normative)
B. Part 2 Change Log (Non-Normative)
----------------------------------------------------------------------------
Table of Contents
1. Introduction
1.1 Notational Conventions
2. WSDL SOAP Binding
2.1 binding Element with binding [parent]
2.1.1 protocol Attribute with binding [owner]
2.1.2 styleDefault Attribute with binding [owner]
2.1.3 namespaceDefault Attribute with binding [owner]
2.1.4 encodingStyleDefault Attribute with binding [owner]
2.2 module Element with binding [parent]
2.2.1 uri Attribute with module [owner]
2.2.2 required Attribute with binding [owner]
2.3 propertyConstraint Element with module [parent]
2.3.1 uri Attribute with propertyConstraint [owner]
2.3.2 type Attribute with propertyConstraint [owner]
2.4 operation Element with operation [parent]
2.4.1 style Attribute with operation [owner]
2.4.2 soapAction Attribute with operation [owner]
2.5 body Element with input or output [parent]
2.5.1 namespace Attribute with body [owner]
2.5.2 encodingStyle Attribute with body [owner]
2.6 header Element with input or output [parent]
2.6.1 element Attribute with header [owner]
2.6.2 type Attribute with header [owner]
2.6.3 localname Attribute with header [owner]
2.6.4 namespace Attribute with header [owner]
2.6.5 encodingStyle Attribute with header [owner]
2.6.6 role Attribute with header [owner]
2.7 headerfault Element with input or output [parent]
2.7.1 message Attribute with headerfault [owner]
2.7.2 part Attribute with headerfault [owner]
2.7.3 namespace Attribute with headerfault [owner]
2.7.4 encodingStyle Attribute with headerfault [owner]
2.8 fault Element with fault [parent]
2.8.1 message Attribute with fault [owner]
2.8.2 namespace Attribute with fault [owner]
2.8.3 encodingStyle Attribute with fault [owner]
2.9 address Element with endpoint [parent]
2.9.1 location Attribute with address [owner]
3. WSDL HTTP Binding
3.1 binding Element with binding [parent]
3.1.1 verbDefault Attribute with binding [owner]
3.2 operation Element with operation [parent]
3.2.1 verb Attribute with operation [owner]
3.2.2 location Attribute with operation [owner]
3.3 Method is GET
3.3.1 Case of Input Parts Cited in location Attribute
3.3.2 Case of Input Parts NOT Cited in location attribute
3.3.2.1 Serializing Parts into HTTP Body request
3.3.3 Case of Output Parts
3.3.3.1 Serializing parts into HTTP Body response
3.4 Method is POST
3.4.1 XML Encoding Mechanism
3.4.1.1 Case of Input Parts Cited in location Attribute
3.4.1.2 Case of Input Parts NOT Cited in location attribute
3.4.1.3 Case of Output Parts
3.4.2 Multipart Encoding Mechanism
3.4.2.1 Case of Input Parts Cited in location Attribute
3.4.2.2 Case of Input Parts NOT Cited in location Attribute
3.4.2.3 Case of Output Parts
3.4.3 application/x-www-form-urlencoded Encoding Mechanism
3.4.3.1 Case of Input Parts Cited in location Attribute
3.4.3.2 Case of Input Parts NOT Cited in location Attribute
3.4.3.3 Case of Output Parts
3.5 address Element with endpoint [parent]
3.5.1 location Attribute with address [owner]
4. MIME Binding
4.1 How the MIME Binding extends WSDL
4.2 mime:content
4.3 mime:multipartRelated
4.4 soap:body
4.5 mime:mimeXml
5. References
5.1 Normative References
5.2 Informative References
Appendices
A. Acknowledgements (Non-Normative)
B. Part 2 Change Log (Non-Normative)
B.1 WSDL Specification Changes
B.2 XML Schema Changes
----------------------------------------------------------------------------
1. Introduction
The Web Services Description Language WSDL Version 1.2 (WSDL) [WSDL 1.2 Core
Language] defines an XML grammar [XML 1.0] for describing network services
as collections of communication endpoints capable of exchanging messages.
WSDL service definitions provide documentation for distributed systems and
serve as a recipe for automating the details involved in applications
communication. WSDL 1.2 Bindings (this document) defines binding extensions
for the following protocols and message formats:
* SOAP Version 1.2 [SOAP 1.2 Part 1: Messaging Framework] (see 2. WSDL
SOAP Binding).
* HTTP/1.1 GET/POST [IETF RFC 2616] (see 3. WSDL HTTP Binding).
* MIME [IETF RFC 2045] (see 4. MIME Binding).
WSDL 1.2 Primer [WSDL 1.2 Primer] is a non-normative document intended to
provide an easily understandable tutorial on the features of the WSDL
Version 1.2 specifications.
The Core Language [WSDL 1.2 Core Language] of the WSDL 1.2 specification
describes the core elements of the WSDL language.
1.1 Notational Conventions
The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD",
"SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to
be interpreted as described in RFC2119 [IETF RFC 2119].
This specification uses a number of namespace prefixes throughout; they are
listed in Table 1-1. Note that the choice of any namespace prefix is
arbitrary and not semantically significant (see [XML Information Set]).
Table 1-1. Prefixes and Namespaces used in this specification
Prefix Namespace Notes
A normative XML Schema [XML Schema
Structures], [XML Schema Datatypes]
wsdl "http://www.w3.org/2003/06/wsdl" document for the
"http://www.w3.org/2003/06/wsdl"
namespace can be found at
http://www.w3.org/2003/06/wsdl.
A normative XML Schema [XML Schema
Structures], [XML Schema Datatypes]
soap "http://www.w3.org/2003/06/wsdl/soap12" document for the
"http://www.w3.org/2003/06/wsdl/soap12"
namespace can be found at
http://www.w3.org/2003/06/wsdl/soap12.
A normative XML Schema [XML Schema
Structures], [XML Schema Datatypes]
http "http://www.w3.org/2003/06/wsdl/http" document for the
"http://www.w3.org/2003/06/wsdl/http"
namespace can be found at
http://www.w3.org/2003/06/wsdl/http.
A normative XML Schema [XML Schema
Structures], [XML Schema Datatypes]
mime "http://www.w3.org/2003/06/wsdl/mime" document for the
"http://www.w3.org/2003/06/wsdl/mime"
namespace can be found at
http://www.w3.org/2003/06/wsdl/mime.
Defined in the W3C XML Schema
xsd "http://www.w3.org/2001/XMLSchema" specification [XML Schema Structures],
[XML Schema Datatypes].
Defined in the W3C XML Schema
xsi "http://www.w3.org/2001/XMLSchema-instance" specification [XML Schema Structures],
[XML Schema Datatypes].
Namespace names of the general form "http://example.org/..." and
"http://example.com/..." represent application or context-dependent URIs
[IETF RFC 2396].
This specification uses the Extended Backus-Naur Form (EBNF) as described in
XML 1.0 [XML 1.0].
All parts of this specification are normative, with the EXCEPTION of
pseudo-schemas, examples, and sections explicitly marked as "Non-Normative".
Pseudo-schemas are provided for each component, before the description of
this component.
2. WSDL SOAP Binding
Editorial note: JCS 20030115
The WG is actively redesigning the SOAP/HTTP binding to align with changes
in SOAP 1.2.
Editorial note: JCS 20030115
This section is not fully converted to a component model compatible with
Part 1.
WSDL includes a binding for SOAP 1.2 endpoints, which supports the
specification of the following protocol specific information:
* An indication that a binding is bound to the SOAP 1.2 protocol.
* A way of specifying an address for a SOAP endpoint.
* The URI for the SOAPAction HTTP header field for the HTTP binding of
SOAP.
Editorial note: JCS 20030115
The SOAP 1.2 HTTP binding does not define a SOAPAction HTTP header
field. This is a known issue.
* A list of definitions for header blocks that are transmitted as part of
the SOAP Envelope
This binding grammar is not an exhaustive specification since the set of
SOAP bindings is evolving. Nothing precludes additional SOAP bindings to be
derived from portions of this grammar. For example:
* SOAP bindings that do not employ a URI addressing scheme may substitute
another addressing scheme by replacing the soap:address element defined
in 2.9 address Element with endpoint [parent] .
* SOAP bindings that do not require a SOAPAction omit the soapAction
attribute defined in 2.4 operation Element with operation [parent] .
2.1 binding Element with binding [parent]
The mandatory binding element information item indicates that messages are
SOAP Envelopes [SOAP 1.2 Part 1: Messaging Framework].
The binding element information item has the following Infoset properties:
* A [local name] of binding
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/soap12"
* A [parent] of binding in the namespace named
"http://www.w3.org/2003/06/wsdl"
* One or more attribute information items amongst its [attributes] as
follows:
o A required protocol attribute information item as described below.
o An optional styleDefault attribute information item as described
below.
o An optional namespaceDefault attribute information item as
described below.
o An optional encodingStyleDefault attribute information item as
described below.
The binding element information item has no [children].
2.1.1 protocol Attribute with binding [owner]
The protocol attribute information item indicates which underlying protocol
to use for SOAP Envelopes within a binding element information item. The
protocol attribute information item has the following Infoset properties:
* A [local name] of protocol
* A [namespace name] which has no value
* An [owner] of binding in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the protocol attribute information item is xsd:anyURI. The value
of the protocol attribute information item is a URI that identifies a
specific protocol to carry SOAP Envelopes. The URI value
"http://www.w3.org/2003/05/soap/bindings/HTTP/" corresponds to the HTTP
binding in the SOAP specification.
2.1.2 styleDefault Attribute with binding [owner]
The styleDefault attribute information item indicates the default
serialization style for all operations contained within the [ancestor]
binding. The styleDefault attribute information item has the following
Infoset properties:
* A [local name] of styleDefault
* A [namespace name] which has no value
* An [owner] of binding in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the styleDefault attribute information item is xsd:string. The
value of the styleDefault attribute information item is either "document" or
"rpc"; if the styleDefault attribute information item is omitted, the value
is "document". See below for more information on the semantics of the style
attribute information item.
2.1.3 namespaceDefault Attribute with binding [owner]
The namespaceDefault attribute information item indicates the default
namespace to use for any operation contained within the [ancestor] binding
with style attribute information item with value "rpc". The namespaceDefault
attribute information item has the following Infoset properties:
* A [local name] of namespaceDefault
* A [namespace name] which has no value
* An [owner] of binding in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the namespaceDefault attribute information item is xsd:anyURI.
The value of the namespaceDefault attribute information item is the XML
namespace to use for the 'wrapper' element for the SOAP Envelope body
block(s). See below for more information on the semantics of the namespace
attribute information item.
2.1.4 encodingStyleDefault Attribute with binding [owner]
The encodingStyleDefault attribute information item indicates the default
encodingStyle to use for any operation contained within the [ancestor]
binding. The encodingStyleDefault attribute information item has the
following Infoset properties:
* A [local name] of encodingStyleDefault
* A [namespace name] which has no value
* An [owner] of binding in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the encodingStyleDefault attribute information item is
xsd:anyURI.
The encodingStyle and encodingStyleDefault attribute information items
indicate how the type description for the SOAP Envelope component was
derived. This information MAY be exploited by tools that generate data
structures from the type description.
The [normalized value]
"http://www.w3.org/2003/05/soap-envelope/encoding/none" indicates that the
type description was not derived as a function of a well-known encoding. The
[normalized value] MUST NOT be "". If no encodingStyleDefault is in scope,
then the [normalized value] is
"http://www.w3.org/2003/05/soap-envelope/encoding/none"
For all [normalized value]s of the encodingStyle and encodingStyleDefault
attribute information items, the SOAP Envelope component(s) MUST be exactly
as described by the type description; the writer of the SOAP Envelope
component(s) MUST it exactly as described by the type description.
2.2 module Element with binding [parent]
The optional module element information item indicates SOAP module(s)
supported by a binding element information item. A SOAP module[SOAP 1.2 Part
1: Messaging Framework] realizes zero or more SOAP features implemented as
one or more SOAP header blocks.
The module element information item has the following Infoset properties:
* A [local name] of module
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/soap12"
* A [parent] of binding in the namespace named
"http://www.w3.org/2003/06/wsdl"
* One or more attribute information items amongst its [attributes] as
follows:
o A required uri attribute information item as described below
o An optional required attribute information item as described below
2.2.1 uri Attribute with module [owner]
The uri attribute information item specifies the URI of the SOAP module for
the [owner] module . The uri attribute information item has the following
Infoset properties:
* A [local name] of uri
* A [namespace name] which has no value
* An [owner] of module in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the uri attribute information item is xsd:anyURI. The value of
the uri attribute information item is a URI that identifies a specific SOAP
module.
2.2.2 required Attribute with binding [owner]
The required attribute information item specifies whether the [owner] module
is required by the [parent] binding. The required attribute information item
has the following Infoset properties:
* A [local name] of required
* A [namespace name] which has no value
* An [owner] of module in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the required attribute information item is xsd:boolean.
Omitting this attribute information item is defined as being semantically
equivalent to including it with a value of "false".
2.3 propertyConstraint Element with module [parent]
The optional propertyConstraint element information item indicates SOAP
module(s) supported by a module element information item.
The propertyConstraint element information item has the following Infoset
properties:
* A [local name] of propertyConstraint
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/soap12"
* A [parent] of module in the namespace named
"http://www.w3.org/2003/06/wsdl"
* One or more attribute information items amongst its [attributes] as
follows:
o A required uri attribute information item as described below
o An optional type attribute information item as described below
The value of the propertyConstraint element information item is the value
that is required for the SOAP property of the [parent] module .
The propertyConstraint element information item has no [children].
2.3.1 uri Attribute with propertyConstraint [owner]
The uri attribute information item specifies the URI of the SOAP property
for the [ancestor] module . The uri attribute information item has the
following Infoset properties:
* A [local name] of uri
* A [namespace name] which has no value
* An [owner] of propertyConstraint in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the uri attribute information item is xsd:anyURI. The value of
the uri attribute information item is a URI that identifies a specific SOAP
property for the [ancestor] module .
2.3.2 type Attribute with propertyConstraint [owner]
The type attribute information item specifies the type of the value of the
[owner] propertyConstraint . The type attribute information item has the
following Infoset properties:
* A [local name] of type
* A [namespace name] which has no value
* An [owner] of propertyConstraint in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the type attribute information item is xsd:QName. The value of
the type attribute information item is XML Qualified Name that identifies
the type of the value for the [owner] propertyConstraint .
2.4 operation Element with operation [parent]
?
The optional operation element information item provides binding information
for the [parent] operation. The operation element information item has the
following Infoset properties:
* A [local name] of operation
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/soap12"
* A [parent] of operation in the namespace named
"http://www.w3.org/2003/06/wsdl"
* Zero or more attribute information items amongst its [attributes] as
follows:
o An optional style attribute information item as described below
o An optional soapAction attribute information item as described
below
The operation element information item has no [children].
If the operation element information item has no [attributes], it MAY be
omitted.
2.4.1 style Attribute with operation [owner]
The style attribute information item indicates the serialization style of
the operation owner. The style attribute information item has the following
Infoset properties:
* A [local name] of style
* A [namespace name] which has no value
* An [owner] of operation in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the style attribute information item is xsd:string.
The value of the style attribute information item indicates whether the
[owner] operation is serialized according to a document-oriented style
(message contains document(s)) or remote-procedure-call (RPC) oriented style
(message contains parameter(s) and/or return value(s)). This information may
be used to select an appropriate programming model. The value of this
attribute information item also affects the way in which the Fault of the
SOAP message is constructed, as explained in section 2.5 body Element with
input or output [parent] . If the style attribute information item is not
specified, it defaults to the value specified in the [ancestor] binding
element information item in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12".
2.4.2 soapAction Attribute with operation [owner]
Editorial note: JCS 20030115
The SOAP 1.2 HTTP binding does not define a SOAPAction HTTP header. This
is a known issue.
The soapAction attribute information item specifies the value of the HTTP
SOAPAction header for the operation owner. The soapAction attribute
information item has the following Infoset properties:
* A [local name] of soapAction
* A [namespace name] which has no value
* An [owner] of operation in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the soapAction attribute information item is xsd:anyURI.
The value of the soapAction attribute information item is the URI to be
included in the HTTP SOAPAction header for the [owner] operation. This URI
value should be used directly as the value for the HTTP SOAPAction header;
no attempt should be made to make a relative URI value absolute when making
the request. For the HTTP protocol binding of SOAP, this value is required
(it has no default value). For other SOAP protocol bindings, it MUST NOT be
specified.
2.5 body Element with input or output [parent]
[ | ]
The optional body element information item specifies properties of the SOAP
Envelope body block(s) for the [parent] operation. The body element
information item has the following Infoset properties:
* A [local name] of body
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/soap12"
* A [parent] of input or output in the namespace named
"http://www.w3.org/2003/06/wsdl"
* Zero or more attribute information items amongst its [attributes] as
follows:
o An optional namespace attribute information item as described
below
o An optional encodingStyle attribute information item as described
below
The body element information item has no [children].
If the body element information item has no [attributes], it MAY be omitted.
The body element information item provides information on how to assemble
the different message parts inside the Fault element of the SOAP Envelope.
The body element information item is used in both RPC-oriented and
document-oriented messages, but the style of the enclosing operation has
important effects on how the Fault section is structured:
* If the operation style is rpc each part is a parameter or a return
value and appears inside a wrapper element within the body. The wrapper
element is named identically to the operation name and its namespace is
the value of the namespace attribute. Each message part (parameter)
appears under the wrapper, represented by an accessor named identically
to the corresponding parameter of the call. Parts are arranged in the
same order as the parameters of the call.
* If the operation style is document there are no additional wrappers,
and the message parts appear directly under the SOAP Fault element.
The same mechanisms are used to define the content of the Fault and
parameter accessor elements.
Each part references a concrete schema definition using either the element
or type attribute information item. In the first case, the element
referenced by the part will appear directly under the Body SOAP Envelope
element (for document style bindings) or under an accessor element named
after the message part (in rpc style). In the second, the type referenced by
the part becomes the schema type of the enclosing element (Body for document
style or part accessor element for rpc style).
2.5.1 namespace Attribute with body [owner]
The namespace attribute information item defines the XML namespace to use
for the SOAP body block(s) for the [ancestor] operation . The namespace
attribute information item has the following Infoset properties:
* A [local name] of namespace
* A [namespace name] which has no value
* An [owner] of body in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the namespace attribute information item is xsd:anyURI. The
value of the namespace attribute information item is the XML namespace to
use for the 'wrapper' element for the SOAP Envelope body block(s).
If the value of the style attribute information item is "document", then the
namespace attribute information item with [owner] body is not applicable.
2.5.2 encodingStyle Attribute with body [owner]
The encodingStyle attribute information item indicates the encoding style
that was used to generate type description for the SOAP body block(s) for
the [ancestor] operation .
The encodingStyle attribute information item has the following Infoset
properties:
* A [local name] of encodingStyle
* A [namespace name] which has no value
* An [owner] of body in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the encodingStyle attribute information item is xsd:anyURI.
The [normalized value]
"http://www.w3.org/2003/05/soap-envelope/encoding/none" indicates that the
type description has not been derived as a function of a well-known
encoding. The [normalized value] MUST NOT be "". If no encodingStyle is in
scope, then the [normalized value] is the encodingStyleDefault attribute
information item.
2.6 header Element with input or output [parent]
[ | ]
The optional header element information item specifies SOAP header block(s)
for the [ancestor] operation. The header element information item has the
following Infoset properties:
* A [local name] of header
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/soap12"
* A [parent] of input or output in the namespace named
"http://www.w3.org/2003/06/wsdl"
* One or more attribute information items amongst its [attributes] as
follows:
o An optional element attribute information item as described below
o An optional type attribute information item as described below
o An optional localname attribute information item as described
below
o An optional namespace attribute information item as described
below
o An optional encodingStyle attribute information item as described
below
o An optional role attribute information item as described below
The header element information item has no [children].
The header element information item allow headers to be defined that are
transmitted as SOAP header blocks. It is not necessary to exhaustively list
all header blocks that appear in the SOAP Envelope using header element
information items. For example, extensions (see Language Extensibility and
Binding, [WSDL 1.2 Core Language], section 4) to WSDL may imply specific
headers should be added to the actual payload, and it is not required to
list those headers here.
Exactly one of the element and type attribute information items MUST be
specified. The localname and namespace attribute information items MUST be
specified if and only if the type attribute information item is specified.
2.6.1 element Attribute with header [owner]
The element attribute information item refers to an XML Schema element
declaration component that defines the SOAP header block for the [owner]
header . The element attribute information item has the following Infoset
properties:
* A [local name] of element
* A [namespace name] which has no value
* An [owner] of header in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the element attribute information item is xsd:QName.
2.6.2 type Attribute with header [owner]
The type attribute information item refers to an XML Schema type description
that defines the SOAP header block for the [owner] header . The type
attribute information item has the following Infoset properties:
* A [local name] of type
* A [namespace name] which has no value
* An [owner] of header in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the type attribute information item is xsd:QName.
The namespace attribute information item is used in the same way as with the
body element information item (see section 2.5 body Element with input or
output [parent] ), only style="document" is assumed since headers do not
contain parameters.
The schema referenced MAY include definitions for the actor and
mustUnderstand attribute information item in the namespace named
"http://www.w3.org/2003/05/soap-envelope".
2.6.3 localname Attribute with header [owner]
The localname attribute information item defines the localname of the SOAP
header block for the [owner] header when it has a type attribute information
item. The localname attribute information item has the following Infoset
properties:
* A [local name] of localname
* A [namespace name] which has no value
* An [owner] of header in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the localname attribute information item is xsd:NCName.
2.6.4 namespace Attribute with header [owner]
The namespace attribute information item defines the XML namespace of the
SOAP header block for the [owner] header when it has a type attribute
information item. The namespace attribute information item has the following
Infoset properties:
* A [local name] of namespace
* A [namespace name] which has no value
* An [owner] of header in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the namespace attribute information item is xsd:anyURI.
2.6.5 encodingStyle Attribute with header [owner]
The encodingStyle attribute information item indicates the encoding style
that was used to generate type description for the SOAP header block(s) for
the [ancestor] operation .
The encodingStyle attribute information item has the following Infoset
properties:
* A [local name] of encodingStyle
* A [namespace name] which has no value
* An [owner] of header in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the encodingStyle attribute information item is xsd:anyURI.
The [normalized value]
"http://www.w3.org/2003/05/soap-envelope/encoding/none" indicates that the
type description has not been derived as a function of a well-known
encoding. The [normalized value] MUST NOT be "". If no encodingStyle is in
scope, then the [normalized value] is the encodingStyleDefault attribute
information item.
2.6.6 role Attribute with header [owner]
The optional role attribute information item identifies the SOAP role to
which a SOAP header block is targeted. The role attribute information item
has:
* A [local name] of role
* A [namespace name] which has no value
* A [specified] property with a value of "true"
* An [owner] of header in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the role attribute information item is xsd:anyURI. The value of
the role attribute information item is a URI that names a role that a SOAP
node can assume. It SHOULD NOT be a relative URI.
A role attribute information item that is either absent or has an empty
value is equivalent to indicating a value of
"http://www.w3.org/2003/05/soap-envelope/role/ultimateReceiver", i.e.,
targeting the SOAP header block to an ultimate SOAP receiver.
2.7 headerfault Element with input or output [parent]
[ | ]
Editorial note: JJM 2003/05/23
This section has not yet been finalized.
The optional headerfault element information item specifies SOAP fault
header block(s) for the [ancestor] operation. The SOAP specification states
that errors pertaining to header blocks have to be returned in header
blocks, and this mechanism allows specifying the format of such fault header
blocks.
The headerfault element information item has the following Infoset
properties:
* A [local name] of headerfault
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/soap12"
* A [parent] of input or output in the namespace named
"http://www.w3.org/2003/06/wsdl"
* One or more attribute information items amongst its [attributes] as
follows:
o A mandatory message attribute information item as described below.
o A mandatory part attribute information item as described below.
o An optional namespace attribute information item as described
below.
o An optional encodingStyle attribute information item as described
below.
The headerfault element information item has no [children].
The headerfault element information item allows fault headers to be defined
that are transmitted as SOAP fault header blocks, and that carry information
pertaining to the faulty SOAP header block defined by the corresponding
header .
The namespace attribute information items MUST be specified if and only if
the type attribute information item is specified.
2.7.1 message Attribute with headerfault [owner]
The message attribute information item refers to an XML Schema element
declaration component that defines the SOAP fault header block for the
[owner] headerfault . The message attribute information item has the
following Infoset properties:
* A [local name] of message
* A [namespace name] which has no value
* An [owner] of headerfault in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the message attribute information item is xsd:QName.
2.7.2 part Attribute with headerfault [owner]
The part attribute information item refers to an XML Schema type description
that defines the SOAP header block for the [owner] headerfault . The part
attribute information item has the following Infoset properties:
* A [local name] of part
* A [namespace name] which has no value
* An [owner] of headerfault in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the part attribute information item is xsd:QName.
The namespace attribute information item is used in the same way as with the
body element information item (see section 2.5 body Element with input or
output [parent] ), only style="document" is assumed since headers do not
contain parameters.
The schema referenced MAY include definitions for the role and
mustUnderstand attribute information item in the namespace named
"http://www.w3.org/2003/05/soap-envelope".
2.7.3 namespace Attribute with headerfault [owner]
The namespace attribute information item defines the XML namespace of the
SOAP fault header block for the [owner] headerfault when it has a type
attribute information item. The namespace attribute information item has the
following Infoset properties:
* A [local name] of namespace
* A [namespace name] which has no value
* An [owner] of headerfault in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the namespace attribute information item is xsd:anyURI.
2.7.4 encodingStyle Attribute with headerfault [owner]
The encodingStyle attribute information item indicates the encoding style
that was used to generate type description for the SOAP fault header
block(s) for the [ancestor] operation .
The encodingStyle attribute information item has the following Infoset
properties:
* A [local name] of encodingStyle
* A [namespace name] which has no value
* An [owner] of headerfault in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the encodingStyle attribute information item is xsd:anyURI.
The [normalized value]
"http://www.w3.org/2003/05/soap-envelope/encoding/none" indicates that the
type description has not been derived as a function of a well-known
encoding. The [normalized value] MUST NOT be "". If no encodingStyle is in
scope, then the [normalized value] is the encodingStyleDefault attribute
information item.
2.8 fault Element with fault [parent]
*
Editorial note: JJM 2003/05/23
This section has not yet been finalized.
The optional fault element information item specifies SOAP fault for the
[ancestor] operation. It has the following Infoset properties:
* A [local name] of fault
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/soap12"
* A [parent] of fault in the namespace named
"http://www.w3.org/2003/06/wsdl"
* One or more attribute information items amongst its [attributes] as
follows:
o A mandatory message attribute information item as described below.
o An optional namespace attribute information item as described
below.
o An optional encodingStyle attribute information item as described
below.
The fault element information item has no [children].
2.8.1 message Attribute with fault [owner]
The message attribute information item refers to an XML Schema element
declaration component that defines the SOAP fault header block for the
[owner] fault . The message attribute information item has the following
Infoset properties:
* A [local name] of message
* A [namespace name] which has no value
* An [owner] of fault in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the message attribute information item is xsd:QName.
2.8.2 namespace Attribute with fault [owner]
The namespace attribute information item defines the XML namespace of the
SOAP fault for the [owner] fault . The namespace attribute information item
has the following Infoset properties:
* A [local name] of namespace
* A [namespace name] which has no value
* An [owner] of fault in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the namespace attribute information item is xsd:anyURI.
2.8.3 encodingStyle Attribute with fault [owner]
The encodingStyle attribute information item indicates the encoding style
that was used to generate type description for the SOAP fault for the
[ancestor] operation .
The encodingStyle attribute information item has the following Infoset
properties:
* A [local name] of encodingStyle
* A [namespace name] which has no value
* An [owner] of fault in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the encodingStyle attribute information item is xsd:anyURI.
The [normalized value]
"http://www.w3.org/2003/05/soap-envelope/encoding/none" indicates that the
type description has not been derived as a function of a well-known
encoding. The [normalized value] MUST NOT be "". If no encodingStyle is in
scope, then the [normalized value] is the encodingStyleDefault attribute
information item.
2.9 address Element with endpoint [parent]
The mandatory address element information item contains the endpoint address
of an endpoint . The address element information item has the following
Infoset properties:
* A [local name] of address
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/soap12"
* A [parent] of endpoint in the namespace named
"http://www.w3.org/2003/06/wsdl"
* One attribute information item amongst its [attributes] as follows:
o A required location attribute information item as described below
The address element information item has no [children].
2.9.1 location Attribute with address [owner]
The mandatory location attribute information item identifies the endpoint
address of an endpoint . The location attribute information item has the
following Infoset properties:
* A [local name] of location
* A [namespace name] which has no value
* An [owner] of address in the namespace named
"http://www.w3.org/2003/06/wsdl/soap12"
The type of the location attribute information item is xsd:anyURI. The value
of the location attribute information item is a URI that processes messages
bound by the endpoint . The URI scheme of the value of the location
attribute information item MUST correspond to the transport specified by the
value of the binding attribute information item of the endpoint element
information item.
3. WSDL HTTP Binding
Editorial note: JJM 20030514
This section is not fully converted to a component model compatible with
Part 1.
The WSDL HTTP binding described in this section is a binding to HTTP 1.1
[IETF RFC 2616]. This binding extends WSDL [WSDL 1.2 Core Language] by
adding element information items and attribute information items to the
Infoset of the WSDL binding element information item and service element
information item (in the "http://www.w3.org/2003/06/wsdl" namespace).
The WSDL HTTP binding supports the specification of the following protocol
specific information:
* Binding to the HTTP/1.1 protocol.
* An HTTP method to be used for each operation.
* An address for an HTTP endpoint.
* A relative address for each operation (relative to the base address
defined by the port).
* Portions of an input message to be serialized in the path of the
request URI, query parameters of the request URI, or the body of the
request.
* Serializing an output message in the body of the response.
3.1 binding Element with binding [parent]
The mandatory binding element information item indicates that messages are
HTTP messages [IETF RFC 2616].
The binding element information item has the following Infoset properties:
* A [local name] of binding
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/http"
* A [parent] of binding in the namespace named
"http://www.w3.org/2003/06/wsdl"
* Zero or one attribute information items amongst its [attributes] as
follows:
o An optional verbDefault attribute information item as described
below.
The binding element information item has no [children].
3.1.1 verbDefault Attribute with binding [owner]
The verbDefault attribute information item indicates the HTTP method used
within a binding element information item, for example "GET" or "POST".
The verbDefault attribute information item has the following Infoset
properties:
* A [local name] of verbDefault
* A [namespace name] which has no value
* An [owner] of binding in the namespace named
"http://www.w3.org/2003/06/wsdl/http"
The type of the verbDefault attribute information item is xsd:string. The
value of the verbDefault attribute information item is a string that
identifies a specific HTTP method.
3.2 operation Element with operation [parent]
?
The optional operation element information item provides binding information
to the [parent] operation.
The operation element information item has the following Infoset properties:
* A [local name] of operation
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/http"
* A [parent] of operation in the namespace named
"http://www.w3.org/2003/06/wsdl"
* Zero to two attribute information items amongst its [attributes] as
follows:
o An optional location attribute information item as defined below.
o An optional verb attribute information item as described below.
The operation element information item has no [children].
If the operation element information item has no [attributes], it MAY be
omitted.
3.2.1 verb Attribute with operation [owner]
The verb attribute information item indicates the HTTP method used by a
particular operation element information item.
The verb attribute information item has the following Infoset properties:
* A [local name] of verb
* A [namespace name] which has no value
* An [owner] of operation in the namespace named
"http://www.w3.org/2003/06/wsdl/http"
The type of the verb attribute information item is xsd:string.
The value of the verb attribute information item is a string that identifies
a specific HTTP method to be used with this operation. If there is no verb
attribute information item, the HTTP method to be used is specified by the
verbDefault attribute information item with [owner] binding . It is a fatal
error if there is no verb attribute information item or verbDefault
attribute information item.
3.2.2 location Attribute with operation [owner]
The location attribute information item indicates a relative URI for a
particular operation element information item. The location attribute
information item may also indicate which portions of an input message are
serialized in the path of the request URI (as opposed to simply being
serialized as query parameters of the request URI or in the body of the
request).
The location attribute information item has the following Infoset
properties:
* A [local name] of location
* A [namespace name] which has no value
* An [owner] of operation in the namespace named
"http://www.w3.org/2003/06/wsdl/http"
The type of the location attribute information item is xsd:anyURI.
The location attribute information item specifies a template for the
relative portion of the request URI for an operation. This URI is combined
with the base URI specified in the address element information item to form
the full URI for the HTTP request to invoke the operation.
Message parts are serialized according to the rules of:
* Section 3.3 Method is GET, if the HTTP method is "GET"
* Section 3.4 Method is POST, if the HTTP method is "POST"
Editorial note: JJM 2003/05/23
The editors are soliciting input on whether bindings for HTTP PUT or HTTP
DELETE would be appropriate.
3.3 Method is GET
The rules in this section MUST be followed when the HTTP method is "GET".
3.3.1 Case of Input Parts Cited in location Attribute
The location attribute information item MAY cite input message parts to be
serialized in the path of the request URI by enclosing a part name within
curly braces (e.g. "{partName}"):
* When constructing the request URI, each pair of curly braces (and
enclosed part name) is replaced by the corresponding part value.
* A double curly brace (i.e. "{{" or "}}") MAY be used to include a
single, literal curly brace in the request URI.
Part values MUST be URI escaped.
Parts MUST NOT be cited more than once within the location attribute
information item.
Strings enclosed within single curly braces MUST be input message part
names; any other strings enclosed within single curly braces are a fatal
error.
If cited input message parts are defined using an XML Schema type, they MUST
derive from xsd:simpleType, but MUST NOT derive from xsd:hexBinary,
xsd:base64Binary, or any simple list type.
3.3.2 Case of Input Parts NOT Cited in location attribute
All input message parts NOT cited by the location attribute information item
are serialized as query parameters appended to the request URI.
3.3.2.1 Serializing Parts into HTTP Body request
* Uncited parts with single values (non-list) are serialized as a single
name-value parameter pair. The name of the parameter is the name of the
uncited part, and the value of the parameter is the value of the
uncited part.
* Uncited parts with list values are serialized as one name-value
parameter pair per list value. The name of each parameter is the name
of the uncited part, and the value of each parameter is the
corresponding value in the list.
Part names and values MUST be URI escaped.
If uncited input message parts are defined using an XML Schema type, they
MUST derive from xsd:simpleType, MUST NOT derive from xsd:hexBinary or
xsd:base64Binary, but MAY derive from a simple list type.
3.3.3 Case of Output Parts
Output message parts are serialized as a single XML document in the body of
the HTTP response.
3.3.3.1 Serializing parts into HTTP Body response
The root of the document is an XML element whose local name and XML
namespace are the {name} and {target namespace} of the operation,
respectively. The root has one child for each part as follows:
* If the {component reference} for an uncited part corresponds to an
element declaration, the child is the element instance.
* If the {component reference} for an uncited part corresponds to a type
definition, the child has a local name, XML namespace, and value
corresponding to the {name} of the part, the {target namespace} of the
message, and the value of the part, respectively.
The HTTP Content-Type header field MUST be the media type "application/xml"
or any derived XML type ("*/*+xml").
If there are no message parts, the HTTP Body MUST be empty, and the HTTP
Content-Length header field MUST have a value of "0" (zero).
3.4 Method is POST
The rules in this section MUST be followed when the HTTP method is "POST".
Editorial note: JJM 2003/05/22
How do we select the encoding mechanism to be used?
3.4.1 XML Encoding Mechanism
3.4.1.1 Case of Input Parts Cited in location Attribute
All input message parts cited by the location attribute information item are
serialized according to the rules in 3.3.1 Case of Input Parts Cited in
location Attribute.
3.4.1.2 Case of Input Parts NOT Cited in location attribute
All input message parts NOT cited by the location attribute information item
are serialized according to the rules in 3.3.3.1 Serializing parts into HTTP
Body response.
3.4.1.3 Case of Output Parts
All output message parts are serialized according to the rules in 3.3.3 Case
of Output Parts.
3.4.2 Multipart Encoding Mechanism
3.4.2.1 Case of Input Parts Cited in location Attribute
All input message parts cited by the location attribute information item are
serialized according to the rules in 3.3.1 Case of Input Parts Cited in
location Attribute.
3.4.2.2 Case of Input Parts NOT Cited in location Attribute
All input message parts NOT cited by the location attribute information item
are serialized as a single MIME Multipart document in the body of the HTTP
response. The document has one MIME body part for each uncited message part
as follows:
* If the {component reference} for an uncited part corresponds to an
element declaration, the content of the MIME body part is the element
instance. The media type of the MIME body part MUST be
"application/xml" or any derived XML type ("*/*+xml").
* If the {component reference} for an uncited part corresponds to the
simple type definition xsd:hexBinary, xsd:base64Binary or a type
derived from one or the other, the content of the MIME body part is the
element instance. The media type of the MIME body part MUST be the one
specified.
* In all other cases, the content of the MIME body part is an XML
document with a local name, XML namespace, and value corresponding to
the {name} of the part, the {target namespace} of the message, and the
value of the part, respectively. The media type of the MIME body part
MUST be "application/xml".
3.4.2.3 Case of Output Parts
All output message parts are serialized according to the rules in 3.3.3 Case
of Output Parts.
3.4.3 application/x-www-form-urlencoded Encoding Mechanism
3.4.3.1 Case of Input Parts Cited in location Attribute
All input message parts cited by the location attribute information item are
serialized according to the rules in 3.3.1 Case of Input Parts Cited in
location Attribute.
3.4.3.2 Case of Input Parts NOT Cited in location Attribute
All input message parts NOT cited by the location attribute information item
are serialized as a single URLEncoded form in the body of the HTTP request.
* Uncited input parts MUST follow the rules in 3.3.2.1 Serializing Parts
into HTTP Body request
The HTTP Content-Type header field MUST be the media type
"x-www-form-urlencoded".
If there is no uncited message part, the HTTP Body MUST be empty, and the
HTTP Content-Length header field MUST have a value of "0" (zero).
3.4.3.3 Case of Output Parts
All output message parts are serialized according to the rules in 3.3.3 Case
of Output Parts.
3.5 address Element with endpoint [parent]
The mandatory address element information item contains the endpoint address
of an endpoint . The address element information item has the following
Infoset properties:
* A [local name] of address.
* A [namespace name] of "http://www.w3.org/2003/06/wsdl/http."
* A [parent] of endpoint in the namespace named
"http://www.w3.org/2003/06/wsdl."
* One attribute information item amongst its [attributes] as follows:
o A required location attribute information item as described below.
The address element information item has no [children].
3.5.1 location Attribute with address [owner]
The mandatory location attribute information item identifies the endpoint
address of an endpoint . The location attribute information item has the
following Infoset properties:
* A [local name] of location.
* A [namespace name] which has no value.
* An [owner] of address in the namespace named
"http://www.w3.org/2003/06/wsdl/http".
The type of the location attribute information item is xsd:anyURI. The value
of the location attribute information item is a URI that processes messages
bound by the endpoint . The URI scheme of the value of the location
attribute information item MUST correspond to the transport specified by the
value of the binding attribute information item of the endpoint element
information item.
4. MIME Binding
Editorial note: JJM 20030514
This binding has not been revised and may be dropped in a future version
of this specification
WSDL includes a way to bind abstract types to concrete messages in some MIME
format. Bindings for the following MIME types are defined:
* "multipart/related", defined in [IETF RFC 2387].
* "text/xml", defined in [IETF RFC 3023].
* "application/x-www-form-urlencoded", defined in Form content types
([HTML 4.01], section 17.13.4).
* Others (by specifying the MIME type string)
The set of defined MIME types is both large and evolving, so it is not a
goal for WSDL to exhaustively define XML grammar for each MIME type. Nothing
precludes additional grammar to be added to define additional MIME types as
necessary. If a MIME type string is sufficient to describe the content, the
mime element defined below can be used.
4.1 How the MIME Binding extends WSDL
The MIME Binding extends WSDL with the following extension elements:
*
<-- mime element -->
They are used at the following locations in WSDL:
<-- mime elements -->
MIME elements appear under input and output to specify the MIME format. If
multiple appear, they are considered to be alternatives.
4.2 mime:content
To avoid having to define a new element for every MIME format, the
mime:content element may be used if there is no additional information to
convey about the format other than its MIME type string.
The part attribute is used to specify the name of the message part. If the
message has a single part, then the part attribute is optional. The type
attribute contains the MIME type string. A type value has two portions,
separated by a slash (/), either of which may be a wildcard (*). Not
specifying the type attribute indicates that all MIME types are acceptable.
If the return format is XML [XML 1.0], but the schema is not known ahead of
time, the generic mime element can be used indicating "text/xml" [IETF RFC
3023]:
A wildcard (*) can be used to specify a family of mime types, for example
all text types.
The following two examples both specify all mime types:
4.3 mime:multipartRelated
The "multipart/related" MIME type aggregates an arbitrary set of MIME
formatted parts into one message using the MIME type "multipart/related".
The mime:multipartRelated element describes the concrete format of such a
message:
*
<-- mime element -->
The mime:part element describes each part of a "multipart/related" message
[IETF RFC 2387]. MIME elements appear within mime:part to specify the
concrete MIME type for the part. If more than one MIME element appears
inside a mime:part, they are alternatives.
4.4 soap:body
When using the MIME binding with SOAP requests [SOAP 1.2 Part 1: Messaging
Framework], it is legal to use the soap:body element as a MIME element. It
indicates the content type is "text/xml", and there is an enclosing SOAP
Envelope.
4.5 mime:mimeXml
To specify XML payloads that are not SOAP compliant (do not have a SOAP
Envelope), but do have a particular schema, the mime:mimeXml element may be
used to specify that concrete schema. The part attribute refers to a message
part defining the concrete schema of the root XML element. The part
attribute MAY be omitted if the message has only a single part. The part
references a concrete schema using the element attribute for simple parts or
type attribute for composite parts .
5. References
5.1 Normative References
[HTML 4.01]
HTML 4.01 Specification, D. Raggett, A. Le Hors, I. Jacobs, Editors.
World Wide Web Consortium, 24 December 1999. This version of the HTML
4.01 Recommendation is http://www.w3.org/TR/1999/REC-html401-19991224.
The latest version of HTML 4.01 is available at
http://www.w3.org/TR/html401.
[IETF RFC 2045]
Multipurpose Internet Mail Extensions (MIME) Part One: Format of
Internet Message Bodies, N. Freed, N. Borenstein, Authors. Internet
Engineering Task Force, November 1996. Available at
http://www.ietf.org/rfc/rfc2045.txt.
[IETF RFC 2119]
Key words for use in RFCs to Indicate Requirement Levels, S. Bradner,
Author. Internet Engineering Task Force, June 1999. Available at
http://www.ietf.org/rfc/rfc2119.txt.
[IETF RFC 2387]
The MIME Multipart/Related Content-type, E. Levinson, Authors. Internet
Engineering Task Force, August 1998. Available at
http://www.ietf.org/rfc/rfc2387.txt.
[IETF RFC 2396]
Uniform Resource Identifiers (URI): Generic Syntax, T. Berners-Lee, R.
Fielding, L. Masinter, Authors. Internet Engineering Task Force, August
1998. Available at http://www.ietf.org/rfc/rfc2396.txt.
[IETF RFC 2616]
Hypertext Transfer Protocol -- HTTP/1.1, R. Fielding, J. Gettys, J.
Mogul, H. Frystyk, L. Masinter, P. Leach, T. Berners-Lee, Authors.
Internet Engineering Task Force, June 1999. Available at
http://www.ietf.org/rfc/rfc2616.txt.
[IETF RFC 3023]
XML Media Types, M. Murata, S. St. Laurent, D. Kohn, Authors. Internet
Engineering Task Force, January 2001. Available at
http://www.ietf.org/rfc/rfc3023.txt.
[SOAP 1.2 Part 1: Messaging Framework]
SOAP Version 1.2 Part 1: Messaging Framework, M. Gudgin, M. Hadley, N.
Mendelsohn, J-J. Moreau, H. Frystyk Nielsen, Editors. World Wide Web
Consortium, 7 May 2003. This version of the "SOAP Version 1.2 Part 1:
Messaging Framework" Specification is
http://www.w3.org/TR/2003/PR-soap12-part1-20030507/. The latest version
of "SOAP Version 1.2 Part 1: Messaging Framework" is available at
http://www.w3.org/TR/soap12-part1/.
[SOAP 1.2 Part 2: Adjuncts]
SOAP Version 1.2 Part 2: Adjuncts, M. Gudgin, M. Hadley, N. Mendelsohn,
J-J. Moreau, and H. Frystyk Nielsen, Editors. World Wide Web
Consortium, 7 May 2003. This version of the "SOAP Version 1.2 Part 2:
Adjuncts" Specification is
http://www.w3.org/TR/2003/PR-soap12-part2-20030507/. The latest version
of "SOAP Version 1.2 Part 2: Adjuncts" is available at
http://www.w3.org/TR/soap12-part2/.
[XML 1.0]
Extensible Markup Language (XML) 1.0 (Second Edition), T. Bray, J.
Paoli, C. M. Sperberg-McQueen, and E. Maler, Editors. World Wide Web
Consortium, 10 February 1998, revised 6 October 2000. This version of
the XML 1.0 Recommendation is
http://www.w3.org/TR/2000/REC-xml-20001006. The latest version of XML
1.0 is available at http://www.w3.org/TR/REC-xml.
[XML Information Set]
XML Information Set, J. Cowan and R. Tobin, Editors. World Wide Web
Consortium, 24 October 2001. This version of the XML Information Set
Recommendation is http://www.w3.org/TR/2001/REC-xml-infoset-20011024.
The latest version of XML Information Set is available at
http://www.w3.org/TR/xml-infoset.
[XML Schema Structures]
XML Schema Part 1: Structures, H. Thompson, D. Beech, M. Maloney, and
N. Mendelsohn, Editors. World Wide Web Consortium, 2 May 2001. This
version of the XML Schema Part 1 Recommendation is
http://www.w3.org/TR/2001/REC-xmlschema-1-20010502. The latest version
of XML Schema Part 1 is available at http://www.w3.org/TR/xmlschema-1.
[XML Schema Datatypes]
XML Schema Part 2: Datatypes, P. Byron and A. Malhotra, Editors. World
Wide Web Consortium, 2 May 2001. This version of the XML Schema Part 2
Recommendation is http://www.w3.org/TR/2001/REC-xmlschema-2-20010502.
The latest version of XML Schema Part 2 is available at
http://www.w3.org/TR/xmlschema-2.
[WSDL 1.2 Core Language]
Web Services Description Language (WSDL) Version 1.2: Core Language, R.
Chinnici, M. Gudgin, J-J. Moreau, S. Weerawarana, Editors. World Wide
Web Consortium, 11 June 2003. This version of the "Web Services
Description Version 1.2:Core Language" Specification is available is
available at http://www.w3.org/TR/2003/WD-wsdl12-20030611. The latest
version of "Web Services Description Version 1.2: Core Language" is
available at http://www.w3.org/TR/wsdl12.
5.2 Informative References
[WSDL 1.2 Primer]
Web Services Description (WSDL) Version 1.2: Primer, K. Sankar, K. Liu,
D. Booth, Editors. World Wide Web Consortium, 11 June 2003. The
editors' version of the "Web Services Description Version 1.2: Primer"
document is available from http://www.w3.org/2002/ws/desc/.
A. Acknowledgements (Non-Normative)
This document is the work of the W3C Web Services Description Working Group.
Members of the Working Group are (at the time of writing, and by
alphabetical order): Adi Sakala (IONA Technologies), Alan Davies
(SeeBeyond), Allen Brookes (Rogue Wave Softwave), Amelia Lewis
(TIBCO/Extensibility), Arthur Ryman (IBM), Bijan Parsia (University of
Maryland), Dale Moberg (Cyclone Commerce), Dan Kulp (IONA Technologies),
David Booth (W3C), Dietmar Gaertner (Software AG), Don Mullen (TIBCO
Software), Erik Ackerman (Lexmark), Glen Daniels (Macromedia), Igor Sedukhin
(Computer Associates), Ingo Melzer (DaimlerChrysler Research and
Technology), Jacek Kopecky (Systinet), Jean-Jacques Moreau (Canon), Jeff
Mischkinsky (Oracle Corporation), Jeffrey Schlimmer (Microsoft Corporation),
Jerry Thrasher (Lexmark), Jim Hendler (University of Maryland), Johan
Pauhlsson (L'Échangeur), Jonathan Marsh (Chair, Microsoft Corporation),
Kevin Canyang Liu (SAP), Laurent De Teneuille (L'Échangeur), Lily Liu
(webMethods, Inc.), Martin Gudgin (Microsoft Corporation), Michael Champion
(Software AG), Michael Mahan (Nokia), Michael Mealling (Verisign), Mike
Ballantyne (Electronic Data Systems), Mike Davoren (W. W. Grainger), Mike
McHugh (W. W. Grainger), Philippe Le Hégaret (W3C), Prasad Yendluri
(webMethods, Inc.), Roberto Chinnici (Sun Microsystems), Sandeep Kumar
(Cisco Systems), Sandra Swearingen (U.S. Department of Defense, U.S. Air
Force), Sanjiva Weerawarana (IBM), Steve Graham (Global Grid Forum), Steve
Lind (AT&T), Steve Tuecke (Global Grid Forum), Tom Jordahl (Macromedia),
Umit Yalcinalp (Oracle Corporation), Waqar Sadiq (Electronic Data Systems),
William Vambenepe (Hewlett-Packard Company), Youenn Fablet (Canon)
Previous members were: Aaron Skonnard (DevelopMentor), Don Wright (Lexmark),
Barbara Zengler (DaimlerChrysler Research and Technology), Jochen Ruetschlin
(DaimlerChrysler Research and Technology), Joyce Yang (Oracle Corporation),
Keith Ballinger (Microsoft), Krishna Sankar (Cisco Systems), Mario Jeckle
(DaimlerChrysler Research and Technology), Pallavi Malu (Intel Corporation),
William Stumbo (Xerox), Daniel Schutzer (Citigroup), Dave Solo (Citigroup),
Stefano Pogliani (Sun Microsystems), Stephen White (SeeBeyond), Tim Finin
(University of Maryland)
The people who have contributed to discussions on www-ws-desc@w3.org are
also gratefully acknowledged.
B. Part 2 Change Log (Non-Normative)
B.1 WSDL Specification Changes
Date Author Description
20030606JJM Replaced by . Indicated that pseudo-schemas are
not normative
20030604JJM Reformated pseudo-syntax elements to match Part 1 layout
20030529JCS Incorporated text to resolve Issue 6e
20030523JJM Commented out MIME binding example; this is primer stuff.
20030523JJM Added pseudo-syntax to all sections.
20030523JJM Started converting the fault and headerfault sections to
component model.
20030523JJM Complete the Multipart and x-www-form-urlencoded sections.
20030523JJM Fixed typos in HTTP binding (in particular added NOT in
some section headers).
20030522JCS Added rules for serializing HTTP response
20030522JCS Added cardinality to pseudo schema for HTTP binding
20030522JCS Changes @transport to @protocol for SOAP binding
20030522JJM Incorporated remaining text from Philippe into the HTTP
binding.
20030522JJM Polished the HTTP binding, split into subsections, added
double curly brace escape mechanism, removed pseudo-schema.
20030521JCS Added rules for @verbDefault/@verb and @location.
Start converting the HTTP binding to the component model.
20030514JJM The next thing to do will be to remove http:urlReplacement,
etc. and incorporate instead Philippe's text.
20030313MJG Changed to Part 3 ( from Part 2 )
20030117JCS Incorporated resolution for Issue 5 (@encodingStyle).
Referenced (rather than in-lined XML Schema).
20030117JJM Various editorial fixes.
20030116JCS Updated pseudo and XML Schema.
20030116JJM Added propertyConstraint section.
20030116JJM Added soap:module section.
Incorporated resolutions for Issue 25 (drop @use and
@encoding), Issue 51 (headers reference element/type), and
attribute roll up into text and schema. Began reworking
20030115JCS SOAP HTTP binding to use Infoset model. Removed informative
appendices 'Notes on URIs' and example WSDL documents;
expect them to appear in the primer. Updated SOAP 1.2
references to CR.
20030114JJM Removed ednote saying Part 2 is out of synch with Part 1.
20030111JJM Incorporated resolution for issue 17 (role AII).
20030109JJM Incorporated resolution for issue 4 (Namespaces).
20020702JJM Added summary to prefix table.
20020628JJM Added out-of-synch-with-Part2 and not-soap12-yet ednote.
20020621JJM Commented out the link to the previous version. There is no
previous version for 1.2 right now.
20020621JJM Rewrote the Notation Conventions section.
20020621JJM Added reference to part 0 in introduction. Renumbered
references.
20020621JJM Simplified abstract and introduction.
20020621JJM Obtain the list of WG members from a separate file.
20020621JJM Updated stylesheet and DTDs to latest XMLP stylesheet and
DTDs.
Deleted placeholder for appendix C "Location of
20020621JJM Extensibility Elements", since this is part 1 stuff and
extensibility has been reworked anyway.
20020621JJM Corrected link to issues lists
Updated title from "WSDL" to "Web Services Description
20020621JJM Language". Now refer to part 1 as "Web Services... Part 1:
Framework
20020621JJM Added Jeffrey as an editor :-). Removed Gudge (now on Part
2) :-(
20020411JJM Fixed typos noticed by Kevin Liu
20020301JJM Converted the "Schemas" sections
20020301JJM Converted the "Wire WSDL examples" sections
20020301JJM Converted the "Notes on URIs" sections
20020301JJM Converted the "Notational Conventions" sections
20020301JJM Converted the "References" sections
20020301JJM Converted the "MIME Binding" section to XML
20020221JJM Converted the "HTTP Binding" section to XML
20020221JJM Added placeholders for the "Wire examples" and "Schema"
sections
20020221JJM Converted the "SOAP Binding" section to XML
20020221JJM Added the Change Log
20020221JJM Added the Status section
20020221JJM Simplified the introduction; referred to Part1 for a longer
introduction
20020221JJM Renamed to "Part 2: Bindings"
20020221JJM Created from http://www.w3.org/TR/2001/NOTE-wsdl-20010315
B.2 XML Schema Changes
The encoding schema has been updated to be compliant with the XML Schema
Recommendations ([XML Schema Structures] and [XML Schema Datatypes]). The
table below shows the categories of change.
ClassMeaning
@@@ @@@
The table below lists the changes to the encoding schema.
ClassDescription
@@@ @@@