[Contents] [Techniques] [Checklist]

W3C

Authoring Tool Accessibility Guidelines 2.0

W3C Editor's Draft 29 September 2008

This version:
http://www.w3.org/WAI/AU/2008/WD-ATAG20-20080929/WD-ATAG20-20080929.html
Latest version:
http://www.w3.org/TR/ATAG20/
Previous version:
http://www.w3.org/WAI/AU/2008/WD-ATAG20-20080911/WD-ATAG20-20080911.html
Editors:
Jutta Treviranus, Adaptive Technology Resource Centre, University of Toronto
Jan Richards, Adaptive Technology Resource Centre, University of Toronto
Jeanne Spellman, W3C
Previous Editors:
Matt May (until June 2005 while at W3C)

Editing Styles:

Abstract

This specification provides guidelines for designing Web content authoring tools that are more accessible for people with disabilities. An authoring tool that conforms to these guidelines will promote accessibility by providing an accessible user interface to authors with disabilities as well as enabling, supporting, and promoting the production of accessible Web content by all authors.

The "Authoring Tool Accessibility Guidelines 2.0" (ATAG 2.0) is part of a series of accessibility guidelines published by the W3C Web Accessibility Initiative (WAI).

Status of This Document

May be Superseded

This version includes a major revision of Parts A and B. After a review of the entire document at the August Face to Face meeting, the working group reached consensus that major structural changes were necessary. There are a number of places where the group noted that more work was needed and these editorial notes are included in this document.

Part A has been revised to require conformance with WCAG for web technologies and accessibility standards for non-web technologies. At the this time the ISO standard for accessibility is undergoing status changes, so no specific standard for non-web technologies is specified in this version. Items in Part A that are covered by international standards have been removed, while Guidelines and Success Criteria that are unique to Authoring Tools have been maintained.

The major change with Part B has been to remove the requirements for publishing benchmark documents to claim conformance. Since many success criteria in Part B were structured to refer to these benchmark documents, these guidelines and criteria have been edited to remove those references. In most cases, they now refer to the WCAG.

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

Editor's Draft of ATAG 2.0

This is an Editor's Draft.

Comments on any working draft should be sent to public-atag2-comments@w3.org (Public Archive).

The Working Group (AUWG) intends to publish ATAG 2.0 as a W3C Recommendation. Until that time Authoring Tool Accessibility Guidelines 1.0 (ATAG 1.0) [ATAG10] is the stable, referenceable version. This Working Draft does not supersede ATAG 1.0.

Web Accessibility Initiative

This document has been produced as part of the W3C Web Accessibility Initiative (WAI). The goals of the AUWG are discussed in the Working Group charter. The AUWG is part of the WAI Technical Activity.

No Endorsement

Publication as a Working Draft does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

Patents

This document was produced by a group operating under the 5 February 2004 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.


Table of Contents


Introduction

This section is informative, except where noted.

This is a Working Draft of the Authoring Tool Accessibility Guidelines (ATAG) version 2.0. This document includes recommendations for assisting developers to make their authoring tools more accessible to a wide range of people with disabilities, including blindness and low vision, deafness and hearing loss, learning disabilities, cognitive limitations, limited movement, speech difficulties, and others. However, even authoring tools that conform to ATAG 2.0 may not be able to address the needs of people with all types, degrees and combinations of disabilities.

In order to achieve accessibility, authoring tools must address the needs of two (potentially overlapping) user groups:

The guidelines do not include standard usability recommendations except where they have a significantly greater impact on people with disabilities than on other people.

Note that even content that conforms at the highest level (AAA) will not be accessible to individuals with all types, degrees, or combinations of disability, particularly in the cognitive language and learning areas. Creation of authoring tools that address the specialized needs of these communities for is encouraged, but is outside the scope of this document.

These guidelines have been written to address the requirements of many different audiences, including, but not limited to:

Definition of authoring tool

This section is normative.

ATAG 2.0 defines an "authoring tool" as any application, part of an application, or collection of applications that authors interact with to create, modify or assemble Web content to be used by other people.

The definition applies to all or part of the following types of applications:

Notes on the Definition:

  1. Any guidelines that require the ability of authors to modify content in some way always assume that the person has author permission.
  2. Synchronous tools (e.g., chats, collaboration tools, whiteboards, etc.), especially those that archive as Web content, are considered authoring tools and can be made more accessible for both participants and users of the stored archives. While not all parts of ATAG 2.0 will usefully apply, some discussion is provided in ATAG 2.0 Techniques Appendix E: Real-time content production.

===========================

For example, in a CMS system managing a portal, the widget that selects the RSS feed would be covered by ATAG, but the data coming in on the RSS feed would not apply. In a large document management system, the components that allowed entry or selection of alternative formats would apply, but the components that displayed dynamic content where there is no editorial control, would not apply.

However, the definition excludes cases in which:

For example, ATAG does not apply to a component that imports documents into a document share system, or a portal that aggregates RSS feeds. ATAG does apply to the portal management widget that selects the RSS.

assemble?

These guidelines apply to the functions in which authoring choices the authoring tool presents to the author or makes on behalf of the author.

This definition can cover components such as :

 

Components of Web Accessibility

Authoring tools are just one aspect of accessibility. For an overview of the different components of accessibility and how they work together see:

Organization of the ATAG 2.0 Document

Two Parts

ATAG 2.0 is divided into two parts, each reflecting a key aspect of accessible authoring tools. Part A includes principles and associated guidelines that are related to ensuring accessibility of the authoring tool user interface to authors with disabilities. Part B contains principles and guidelines related to ensuring support by authoring tools for the creation of accessible Web content by any author (not just those with disabilities) to end users with disabilities.

Part A: Make the authoring tool user interface accessible

The guidelines and success criteria in Part A are organized around the following four principles, adapted from the four principles in WCAG 2.0:

  1. Authoring tool must facilitate access by assistive technology - Assistive technologies can only provide augmented display and control to their users if the relevant information is made available by authoring tools using common protocols.
  2. Authoring tool must be perceivable - Authors with a wide range of abilities must be able to perceive its user interface components.
  3. Authoring tool must be operable - Authors with a wide range of abilities must be able to operate its user interface components.
  4. Authoring tool must be understandable - Authors with a wide range of abilities must be able to understand the user interface components that they can perceive and operate.
Part B: Support the production of accessible content

There are three principles in Part B:

  1. Production of accessible content must be enabled - The creation of accessible content is dependent on the combined actions of the authoring tool and the author. This guideline specifies the responsibilities that rest exclusively with the tool.
  2. Authors must be supported in the production of accessible content - Actions may be taken at the author's initiative that may result in accessibility problems. The authoring tool should include features that provide support and guidance to authors in these situations, so that accessible authoring practices can be followed and accessible web content can be produced.
  3. Accessibility solutions must be promoted and integrated -Authoring tools should encourage the discovery of tools, features, or functionality which support accessible authoring practices, while at the same time, integrating functions related to accessibility in order to ensure that authors make them common practice.

Note: While the requirements in Part B do not deal with the accessibility of the authoring tool user interface per se, it should be noted that any of the features (e.g., checker, tutorial) added to an authoring tool to meet the Part B success criteria must also meet the user interface accessibility requirements of Part A.

Success Criteria

Under each guideline there are success criteria that describe specifically what must be achieved in order to conform. They are similar to the "checkpoints" in ATAG 1.0. Each success criterion is written as a statement that will be either true or false when a specific authoring tool is tested against it. While all of the ATAG 2.0 success criteria are written to be testable and some test automation may be possible, human testing will usually be required. In order to meet the needs of different groups and different situations, three levels of conformance are defined: A (lowest), AA, and AAA (highest).

Each of the success criteria has a link to the Techniques document that provides:

Note: Any success criteria that are judged not applicable to a particular authoring tool are treated as satisfied for conformance purposes, as long as a rationale is provided.

Levels of Conformance

Authoring tools may claim full conformance to ATAG 2.0 at one of three "full" conformance levels. The level achieved depends on the level of the success criteria that have been satisfied. The full conformance levels are:

  1. Full ATAG 2.0 Conformance at Level "A"
    The authoring tool satisfies all of the Level A success criteria.
  2. Full ATAG 2.0 Conformance at Level "Double-A"
    The authoring tool satisfies all of the Level A and Level AA success criteria.
  3. Full ATAG 2.0 Conformance at Level "Triple-A"
    The authoring tool satisfies all of the success criteria.

@@Maybe remove partial@@

In addition, a "partial conformance" claim option is available in cases where an authoring tool has satisfied all of the success criteria at a specified level in one of the two Parts of the document (i.e., "Part A: Make the authoring tool user interface accessible" and "Part B: Support the production of accessible content"). The partial conformance levels are:

  1. Partial ATAG 2.0 Conformance Level "A": Authoring Tool User Interface
    The authoring tool satisfies all of the Level A success criteria in Part A. Nothing is claimed about Part B.
  2. Partial ATAG 2.0 Conformance Level "Double-A": Authoring Tool User Interface
    The authoring tool satisfies all of the Level A and Level AA success criteria in Part A. Nothing is claimed about Part B.
  3. Partial ATAG 2.0 Conformance Level "Triple-A": Authoring Tool User Interface
    The authoring tool satisfies all of the success criteria in Part A. Nothing is claimed about Part B.
  4. Partial ATAG 2.0 Conformance Level "A": Content Production"
    The authoring tool satisfies all of the Level A success criteria in Part B. Nothing is claimed about Part A.
  5. Partial ATAG 2.0 Conformance Level "Double-A": Content Production"
    The authoring tool satisfies all of the Level A and Level AA success criteria in Part B. Nothing is claimed about Part A.
  6. Partial ATAG 2.0 Conformance Level "Triple-A": Content Production"
    The authoring tool satisfies all of the success criteria in Part B. Nothing is claimed about Part A.

Note: The Working Group remains committed to the guiding principle that: "Everyone should have the ability to create and access Web content". Therefore, it is recommended that partial conformance be claimed as a step towards full conformance.

Relationship to the Web Content Accessibility Guidelines (WCAG) @@rephrase@@

The ATAG 2.0 conformance relies upon Web Content Accessibility "Benchmark" documents to precisely specify what an evaluator interprets "accessible Web content" to mean for the particular Web content technologies that an authoring tool produces and, in the case of Web-based tools, is implemented using.

The primary recommended reference for the Web Content Accessibility "Benchmark" is a version of the W3C Web Content Accessibility Guidelines (WCAG), due to the quality of the documents and the process under which they were developed (See Note on other Accessibility Standards). At the time of publication, version 1.0 of WCAG is a W3C Recommendation [WCAG10], and version 2.0 is a W3C Candidate Recommendation [WCAG20]. Although a Web Content Accessibility "Benchmark" document may use either version of WCAG, developers should give consideration to the following:


ATAG 2.0 Guidelines

The success criteria and applicability notes in this section are normative.

PART A: Make the authoring tool user interface accessible

Applicability Notes:

Developer Responsibility: The success criteria in Part A apply to all apects of the authoring tool user interface that are under the control of the developer. This includes naturally includes functionalities that are independent of the content being edited, such as what is sometimes referred to as the authoring tool's "chrome" (e.g., menus, button bars, status bars, etc.) and also user preferences and documentation, etc. In addition, the developers' responsibility covers certain aspects of other functionalities that reflect the content being edited (e.g., ensuring that an image label present in the content is available programmatically). However, where an accessibility problem in the user interface is caused directly by an accessibility problem in the content it is reflecting (e.g., if an image in the content lacks a label), then this would not be considered a deficiency in the accessibility of the authoring tool user interface.

PRINCIPLE A.1: Authoring tool user interfaces must follow applicable accessibility guidelines

Guideline A.1.1 [For the authoring tool user interface] Ensure that Web-based functionality is accessible. [Techniques]

Rationale: In addition to generally improving the accessibility of the authoring tool user interface, implementing Web-based functionality (e.g., editing views, documentation) using accessible Web content facilitates communication with assistive technologies via user agents.

Applicability Notes:
Level A Success Criteria for Guideline A.1.1
Level AA Success Criteria for Guideline A.1.1
  • A.1.1.2 Web-Based "AA" Accessible: Web-based authoring tool user interfaces meet WCAG Level "AA".
Level AAA Success Criteria for Guideline A.1.1
  • A.1.1.3 Web-Based "AAA" Accessible: Web-based authoring tool user interfaces meet WCAG Level "AAA".

Guideline A.1.2 [For the authoring tool user interface] Ensure that non-Web-based functionality is accessible. [Techniques]

Rationale: Following existing accessibility standards and/or platform conventions will facilitate access by all authors, including those using assistive technologies.

Applicability Notes:
Level A Success Criteria for Guideline A.1.2
  • A.1.2.1 Non-Web-Based Accessible (Level A): Non-Web-based authoring tool user interfaces follow the "Level A" requirements of standards and/or platform conventions that benefit accessibility. The "Level A" are those that are functionally equivalent to WCAG Level A success criteria.
Level AA Success Criteria for Guideline A.1.2
  • A.1.2.2 Non-Web-Based Accessible (Level AA): Non-Web-based authoring tool user interfaces follow the "Level AA" requirements of standards and/or platform conventions that benefit accessibility. The "Level AA" are those that are functionally equivalent to WCAG Level AA success criteria.
Level AAA Success Criteria for Guideline A.1.2
  • A.1.2.3 Non-Web-Based Accessible (Level AAA): Non-Web-based authoring tool user interfaces follow the "Level AAA" requirements of standards and/or platform conventions that benefit accessibility. The "Level AAA" are those that are functionally equivalent to WCAG Level AAA success criteria.

PRINCIPLE A.2: Editing views must be perceivable

Guideline A.2.1 [For the authoring tool user interface] Provide access to alternative equivalents in the content. [Techniques]

Rationale: People who have difficulty perceiving non-text objects are often able to access text alternatives of the same information because there are a variety of ways to display text (e.g., magnification, enhancement, text-to-speech, Braille output)

Applicability Notes:

  • Rendering requirements do not apply to plain text editors.
Level A Success Criteria for Guideline A.2.1
Level AA Success Criteria for Guideline A.2.1
  • (No level AA success criteria for Guideline A.2.1)
Level AAA Success Criteria for Guideline A.2.1
  • (No level AAA success criteria for Guideline A.2.1)

Guideline A.2.2 [For the authoring tool user interface] Ensure that the interface can be presented in different ways. [Techniques]

Rationale: Authors need to have access to and control over both the functional significance of presentation and also, in the context of authoring, the presentation that will be experienced by the end user. This is especially important for user interface components that do not implement an accessibility platform architecture or leverage existing implementations (e.g. custom user interface components built via JavaScript and CSS). Some authors require display settings that differ from the presentation that they intend to define for the published content (e.g., using a high contrast setting during editing content that is not intended to be high contrast).

Level A Success Criteria for Guideline A.2.2
  • A.2.2.1 Independence of Display: Editing views that usually have their display characteristics set by rendering the content being edited (e.g., WYSIWYG editing views) allows the authors' visual and audio display settings to override these characteristics without affecting the content (e.g., markup, stylesheets, etc.) being edited.
  • A.2.2.2 Purpose of Added Presentation: If the authoring tool modifies the presentation of the content being edited, then the functional purpose for the modification is made available via the platform (e.g., if misspelled text is underlined, the fact that it is misspelled is made available).
  • A.2.2.3 Access to Text Presentation (Minimum): If an editing view (e.g., WYSIWYG) renders any of the following text presentation properties and those properties are editable by any editing view (e.g., instruction level), then the properties are made available via the platform:
    • (a) font,
    • (b) style (e.g., italic, bold),
    • (c) color, and
    • (d) size.
Level AA Success Criteria for Guideline A.2.2
  • (No level AA success criteria for Guideline A.2.2)
Level AAA Success Criteria for Guideline A.2.2
  • A.2.2.4 Access to Text Presentation (Enhanced): Any text presentation properties (text size, positioning, etc.) that are rendered in an editing view (e.g., WYSIWYG editing views ) and are editable by any editing view are available via the platform.

PRINCIPLE A.3: Editing views must be operable

Guideline A.3.1 [For the authoring tool user interface] Enhance keyboard access to authoring features. [Techniques]

Rationale: Providing alternate keyboard accessibility provides access for people with limited mobility and people with visual disabilities, who cannot rely on hand-eye coordination for navigating the user interface.

@@AUWG is watching the keyboard control developments in UAAG 2.0@@

Applicability Notes:
Level A Success Criteria for Guideline A.3.1
  • A.3.1.1 Accelerator Keys: If the authoring tool includes any of the following functions, authors can enable key-plus-modifier-key (or single-key) access to them (where allowed by the operating environment):
    • (a) open help system,
    • (b) open new content,
    • (c) open existing content,
    • (d) save content,
    • (e) close content,
    • (f) cut/copy/paste,
    • (g) undo/redo, and
    • (h) open find/replace function.
  • A.3.1.2 Available Keystrokes: Authors can always determine the currently available keystrokes (e.g., from a central location such as a list in the help system or a distributed location such as associating shortcuts with menu items). [UAAG 2.0]
  • A.3.1.3 Standard Text Area Conventions: Editing views that allow text entry support the standard text area conventions for the platform including, but not necessarily limited to: character keys, backspace/delete, insert, "arrow" key navigation, page up/page down, navigate to start/end, navigate by paragraph, shift-to-select mechanism, etc.
Level AA Success Criteria for Guideline A.3.1
  • (No level AA success criteria for Guideline A.3.1)
Level AAA Success Criteria for Guideline A.3.1
  • (No level AAA success criteria for Guideline A.3.1)

Guideline A.3.2 [For the authoring tool user interface] Enable time-independent interaction. [Techniques]

Rationale: People who have difficulty typing, operating the mouse, or processing information can be prevented from using systems with short time limits.

Applicability Note: Several of the success criteria in this guideline only apply when there are time limits put on the author, which is currently not very common for authoring tools.

Level A Success Criteria for Guideline A.3.2
  • A.3.2.1 Data Saved: If the authoring tool ends an authoring session due to a time limit (e.g., authenticated session expires), then the authors have the "pre-settable" option to save the content being edited. For Web-Based Authoring Tools, this applies to any content that has already been submitted to the application by the user agent.
  • A.3.2.2 Timing Adjustable: If the authoring tool is responsible for imposing a time limit on authoring sessions (e.g., to mediate collaborative authoring), then authors can extend the time limit.
  • A.3.2.3 Moving Targets: If the user interface includes any targets for authors' actions (e.g., are clickable, accept drag-and-drop actions) that are capable of movement, then authors can stop that movement.
Level AA Success Criteria for Guideline A.3.2
  • (No level AA success criteria for Guideline A.3.2)
Level AAA Success Criteria for Guideline A.3.2
  • A.3.2.4 No Time Limits: Authors have the option to remove time limits on authoring sessions.

Guideline A.3.3 [For the authoring tool user interface] Help authors avoid flashing that could cause seizures. [Techniques]

Rationale: Flashing can cause seizures in people with photosensitive epilepsy.

Level A Success Criteria for Guideline A.3.3
  • A.3.3.2 Blinking Request: If an editing view renders content such that the authoring tool recognizes it as blinking or flashing (e.g. blink element), then the author has the option to turn off this blinking or flashing.
Level AA Success Criteria for Guideline A.3.3
  • (No level AA success criteria for Guideline A.3.3)
Level AAA Success Criteria for Guideline A.3.3
  • (No level AAA success criteria for Guideline A.3.3)

Guideline A.3.4 [For the authoring tool user interface] Enhance navigation and editing via content structure. [Techniques]

Rationale: People who have difficulty typing or operating the mouse benefit when the structure that may be inherent in certain content can be used to navigate more efficiently within editing views and to perform edits.

Level A Success Criteria for Guideline A.3.4
Level AA Success Criteria for Guideline A.3.4
  • A.3.4.2 Navigate By Element Type: If an editing view displays a structured element set, authors can move the editing focus forward/backward to the next identical or heading element.
  • A.3.4.3 Navigate Tree Structures: If an editing view displays a structured element set, authors can, with a simple action, move the editing focus from any element to other elements in the set with any of the following relationships (if they exist):
    • (a) Parent: the element immediately above,
    • (b) Child: the first element immediately below,
    • (c) Previous Sibling: the element immediately preceding at the same level, and
    • (d) Next Sibling: the element immediately following at the same level.
Level AAA Success Criteria for Guideline A.3.4
  • (No level AAA success criteria for Guideline A.3.4)

Guideline A.3.5 [For the authoring tool user interface] Provide text search. [Techniques]

Rationale: People who have difficulty typing or operating the mouse benefit from the ability to navigation to arbitrary points within editing views.

Applicability Notes:
Level A Success Criteria for Guideline A.3.5
  • (No level A success criteria for Guideline A.3.5)
Level AA Success Criteria for Guideline A.3.5
  • A.3.5.1 Text Search: A function is provided that allows text search of the content, which meets the following conditions:
    • (a) Search All Editable: can search any textual information (including text content, text alternatives for non-text objects, metadata, markup) that is editable using the authoring tool.
    • (b) Bi-Directional: can search backwards and forwards. [UAAG 2.0]
    • (c) Case Sensitive: can search in both case sensitive and case insensitive modes. [UAAG 2.0]
    • (d) May Switch Views: permissible for the authoring tool to switch editing views to display the search results (e.g., from WYSIWYG to instruction level in order to display markup).
Level AAA Success Criteria for Guideline A.3.5
  • (No level AAA success criteria for Guideline A.3.5)

Guideline A.3.6 [For the authoring tool user interface] Manage preference settings. [Techniques]

Rationale: Providing the ability to save and reload sets of keyboard and display preference settings benefits people using multi-user tools as well as people who have needs that differ over time (e.g., due to fatigue).

Level A Success Criteria for Guideline A.3.6
  • (No level A success criteria for Guideline A.3.6)
Level AA Success Criteria for Guideline A.3.6
Level AAA Success Criteria for Guideline A.3.6
  • A.3.6.2 Multiple Sets: Choosing between multiple sets of preferences (e.g., personal profiles, personal settings) are supported for any of the following that the authoring tool controls (i.e., not controlled by the platform):
  • A.3.6.3 Options Wizard: Authors are provided with an accessibility option-setting "wizard" to configure options related to Part A.

Guideline A.3.7 [For the authoring tool user interface] Ensure that previews are as accessible as existing user agents. [Techniques]

Rationale: Preview features are provided in many authoring tools because the workflow of authors often includes periodically checking how content will appear to end users in a user agent. Authors with disabilities need to be able to follow the same workflow.

Note: Previews are treated differently than editing views because authors, including those with disabilities, will not be well-served if preview features diverge too much from the actual functionality of available user agents. Therefore, preview features are exempted from necessarily having to meet all of the other requirements in Part A of this guidelines document, if they meet this guideline.

Level A Success Criteria for Guideline A.3.7
  • A.3.7.1 Return Mechanism: If a preview is provided, then a keyboard accessible mechanism for returning from the preview (i.e., moving focus back from, exiting from) is provided and is documented in the help system.
  • A.3.7.2 Preview: If a preview is provided, then it meets at least one of the following:
    • (a) Existing User Agent: the preview makes use of an existing user agent that is specified in the conformance profile (e.g., opening the content in a third-party browser or browser component),
    • (b) Part A.1: the preview meets all of the Level A guidelines in Principle A.1 of these guidelines, or
    • (c) UAAG: the preview conforms to the User Agent Accessibility Guidelines [UAAG].
Level AA Success Criteria for Guideline A.3.7
  • (No level AA success criteria for Guideline A.3.7)
Level AAA Success Criteria for Guideline A.3.7
  • (No level AAA success criteria for Guideline A.3.7)

PRINCIPLE A.4: Editing views must be understandable

Guideline A.4.1 [For the authoring tool user interface] Help users avoid and correct mistakes. [Techniques]

Rationale: People who have difficulty making fine movements may be prone to making unintended actions.

Applicability Notes:
Level A Success Criteria for Guideline A.4.1
  • A.4.1.1 Undo Content Changes: Authoring actions are either reversible by an "undo" function or include a warning to authors that the action is irreversible. The authoring tool may have certain committing actions (e.g., "save" function) that reset the undo history.
  • A.4.1.2 Undo Setting Changes: Actions that modify authoring tool settings are either reversible or include a warning to the author that the setting modification is irreversible.
Level AA Success Criteria for Guideline A.4.1
  • A.4.1.5 Redo: Authors can immediately reverse the most recent content "undo(s)" (i.e., a "redo" function).
Level AAA Success Criteria for Guideline A.4.1
  • A.4.1.7 Multiple Undos: Authors can reverse at least 5 consecutive reversible authoring actions.

Guideline A.4.2 [For the authoring tool user interface] Document the user interface including all accessibility features. [Techniques]

Rationale: While intuitive user interface design is valuable to many authors, some people may still not be able to understand or be able to operate the authoring tool user interface without proper documentation.

Applicability Notes:
Level A Success Criteria for Guideline A.4.2
  • A.4.2.1 Document Accessibility Features: All features (other than documentation) that are specifically required to meet Part A of these guidelines (e.g. keyboard shortcuts, text search, etc.) are documented.
Level AA Success Criteria for Guideline A.4.2
  • (No level AA success criteria for Guideline A.4.2)
Level AAA Success Criteria for Guideline A.4.2
  • (No level AAA success criteria for Guideline A.4.2)

PART B: Support the production of accessible content

Applicability Notes:

PRINCIPLE B.1: Production of accessible content must be enabled

Guideline B.1.1 Support Web content technologies that enable the creation of content that is accessible. [Techniques]

Rationale: Choosing technologies which support the possibility of accessible authoring is the first step in ensuring that the content produced is accessible.

Level A Success Criteria for Guideline B.1.1
  • B.1.1.1 Tool Choice of Technologies (Level A): Any Web content technologies that is automatically selected by the authoring tool can conform to WCAG Level A.
  • B.1.1.2 Author Choice of Technologies (Level A): If the authoring tool provides authors with Web content technology options, technology options that can conform to WCAG Level A are listed with at least as much prominence as any other options and the tool guides the author towards the most accessible technology for the task.
Level AA Success Criteria for Guideline B.1.1
  • B.1.1.3 Tool Choice of Technologies (Level AA): Any Web content technologies that is automatically selected by the authoring tool can conform to WCAG Level AA.
  • B.1.1.4 Author Choice of Technologies (Level AA): If the authoring tool provides authors with Web content technology options, technology options that can conform to WCAG Level AA are listed with at least as much prominence as any other options and the tool guides the author towards the most accessible technology for the task.
Level AAA Success Criteria for Guideline B.1.1
  • B.1.1.5 Tool Choice of Technologies (Level AAA): Any Web content technologies that is automatically selected by the authoring tool can conform to WCAG Level AAA.
  • B.1.1.6 Author Choice of Technologies (Level AAA): If the authoring tool provides authors with Web content technology options, technology options that can conform to WCAG Level AAA are listed with at least as much prominence as any other options and the tool guides the author towards the most accessible technology for the task.

Guideline B.1.2 Ensure that the authoring tool preserves accessibility information. [Techniques]

Rationale: Accessibility information is critical to maintaining comparable levels of accessibility across transformations and conversions.

Applicability Notes:
  • If an authoring tool performs transformations or conversions after an authoring session ends (e.g., a batch maintenance process) only option (a) is allowed for both B.1.2.1 and B.1.2.3.
Level A Success Criteria for Guideline B.1.2
  • B.1.2.1 Accessibility Information Preservation (Minimum): If the authoring tool performs transformations or conversions on existing Web content, then for any accessibility information that is required for that content to conform to WCAG Level A at least one of the following is true:
    • (a) Preserve in Output: the accessibility information is preserved and available for end users in the resulting content;
    • (b) Preserve Input and Notify: a copy of the accessibility information is retained (e.g., as a "comment", by saving a backup copy) and the authors are notified of the location and of the fact that it will not be available to end users; or
    • (c) Author Queried: the authors are queried for an action for each piece of accessibility information that will not be preserved and is notified that this may result in accessibility problems.
Level AA Success Criteria for Guideline B.1.2
  • B.1.2.2 Accessibility Information Preservation (Enhanced): If the authoring tool performs transformations or conversions during an authoring session, then any accessibility information in the pre-transformation/conversion content that is required for content to conform to WCAG Level AA or AAA is preserved and available for end users in the resulting content;
  • B.1.2.3 Notification Prior to Deletion: If the authoring tool automatically deletes any author-generated content for any reason, then at least one of the following is true:
    • (a) Preserve Accessibility Information: the authoring tool only automatically deletes content that it can detect is not accessibility information;
    • (b) Notification Option: authors have the option to receive notification before deletion; or
    • (c) No Deletion Option: authors have the option to turn off the automatic deletion.
Level AAA Success Criteria for Guideline B.1.2
  • (No level AAA success criteria for Guideline B.1.2)

Guideline B.1.3 Ensure that automatically generated content is accessible. [Techniques]

Rationale: Authoring tools that automatically generate content that is not accessible impose additional repair tasks on authors.

Related: If accessibility information is required from authors during the automatic generation process, see Guideline B.2.1. If templates or other pre-authored content are involved, see Guideline B.2.5.

Applicability Notes:

  • This guideline applies to the automated behavior specified by the authoring tool developer under the assumption that authors will respond properly to any prompts.
  • The guideline does not apply when actions of the authors prevent generation of accessible content (e.g., by setting less strict preferences, ignoring prompts for accessibility information, providing faulty information, writing their own automated scripts, etc.).
Level A Success Criteria for Guideline B.1.3
  • B.1.3.1 Automatic "A" Accessible: If the authoring tool automatically generates content, then that content meets WCAG Level A at the conclusion of the automatic generation process (e.g., when inserted into the existing content).
Level AA Success Criteria for Guideline B.1.3
  • B.1.3.2 Automatic "AA" Accessible: If the authoring tool automatically generates content, then that content meets WCAG Level AA at the conclusion of the automatic generation process.
Level AAA Success Criteria for Guideline B.1.3
  • B.1.3.3 Automatic "AAA" Accessible: If the authoring tool automatically generates content, then that content meets WCAG Level AAA at the conclusion of the automatic generation process.

PRINCIPLE B.2: Authors must be supported in the production of accessible content

Applicability Notes:
  • Principle B.2 applies to authoring tool processes that interact with human authors, and the authoring choices that author is making or the authoring choices under the control of the authoring tool. Authoring choices include choice of style sheets, templates, scripts, etc

Guideline B.2.1 Guide authors to create accessible content. [Techniques]

Rationale: By guiding authors from the outset towards the creation and maintenance of accessible content, accessibility problems are mitigated and less repair and retrofit effort is required.

Level A Success Criteria for Guideline B.2.1
  • B.2.1.1 Guide "A" Accessible: If authors are asked for any information as content is being added or updated (e.g., by an image modification dialog), then the tool also prominently asks for any accessibility information required for that content to meet WCAG Level A.
  • B.2.1.2 Warn "A" Accessible: If an authoring action or instruction will always lead to the creation of content that cannot be made to meet WCAG Level A other than by making an alternative version, then a warning is displayed.
Level AA Success Criteria for Guideline B.2.1
  • B.2.1.3 Guide "AA" Accessible: If authors are asked for any information as content is being added or updated, then the tool also prominently asks for accessibility information required for that content to meet WCAG Level AA.
  • B.2.1.4 Warn "AA" Accessible: If an authoring action or instruction will always lead to the creation of content that cannot be made to meet WCAG Level AA other than by making an alternative version, then a warning is displayed.
Level AAA Success Criteria for Guideline B.2.1
  • B.2.1.5 Guide "AAA" Accessible: If authors are asked for any information as content is being added or updated, then the tool also prominently asks for accessibility information required for that content to meet WCAG Level AAA.
  • B.2.1.6 Warn "AAA" Accessible: If an authoring action or instruction will always lead to the creation of content that cannot be made to meet WCAG Level AAA other than by making an alternative version, then a warning is displayed.

Guideline B.2.2 Assist authors in checking for accessibility problems. [Techniques]

Rationale: Checking as an integrated function of the authoring tool helps make authors aware of accessibility problems during the authoring process, so they can be immediately addressed.

Applicability Notes:
  • While automated checking or more advanced implementations of semi-automated checking may improve the authoring experience, manual checking is the minimum requirement to meet the success criteria for this guideline.
  • This guideline does not apply if the authoring tool controls the authoring process to such an extent that it is not possible for authors to introduce accessibility problems.
  • This guideline does not apply to content that is not available at publishing (e.g., the actual content of third-party "feeds").
Level A Success Criteria for Guideline B.2.2
  • B.2.2.1 Check Accessibility (Level A): At least one individual check is associated with each WCAG Level A Success Criterion that the tool has the functionality to modify (e.g., a tool that inserts images should check for alt text; a tool that can edit captions should check for them).
  • B.2.2.2 Availability: Checking is available prior to publishing in a manner appropriate to the workflow of the authoring tool.
  • B.2.2.2 Identify Range: The appropriate range (e.g., element, group of elements, entire file, site, Web application, etc.) for each potential accessibility problem is identified.
  • B.2.2.4 Help Authors Decide: For any checks that require author judgment to determine whether a potential accessibility problem is correctly identified (i.e., manual checking and semi-automated checking), instructions are provided to help authors to decide.
Level AA Success Criteria for Guideline B.2.2
  • B.2.2.5 Check Accessibility (Level AA): At least one individual check is associated with each WCAG Level AA Success Criterion that the tool has the functionality to modify.
  • B.2.2.6 View Status: If the authoring tool records accessibility problems found during checking, then a list of any accessibility problems is available to authors prior to the end of the authoring session.
  • B.2.2.7 Save Status for Repair: If repair assistance is not provided during checking , authors have the option to save the list to facilitate interoperability between checking and repair.
  • B.2.2.8 Metadata for Discovery: If the authoring tool records accessibility status, then authors have the option to associate this status with the content as metadata to facilitate resource discovery by end users.
Level AAA Success Criteria for Guideline B.2.2
  • B.2.2.9 Check Accessibility (Level AAA): At least one individual check is associated with each WCAG Level AAA Success Criterion that the tool has the functionality to modify.

Guideline B.2.3 Assist authors in repairing accessibility problems. [Techniques]

Rationale: Repair as an integral part of the authoring process greatly enhances the utility of checking and increases the likelihood that accessibility problems will be properly addressed.

Appliciability Notes:
  • While automated repairing or more advanced implementations of semi-automated repairing may improve the authoring experience, only manual repairing is the minimum requirement to meet the success criteria for this guideline.
  • This guideline does not apply if the authoring tool controls the authoring process to an extent that it is not possible for authors to introduce accessibility problems
Level A Success Criteria for Guideline B.2.3
Level AA Success Criteria for Guideline B.2.3
  • B.2.3.2 Repair Accessibility (AA): For each WCAG Level AA accessibility problem that is identifiable during checking, repair assistance is provided.
Level AAA Success Criteria for Guideline B.2.3
  • B.2.3.3 Repair Accessibility (AAA): For each WCAG Level AAA accessibility problem that is identifiable during checking, repair assistance is provided.

Guideline B.2.4 Assist authors to manage, edit, and reuse equivalent alternatives for non-text objects. [Techniques]

Rationale: Improperly generated equivalent alternatives can create accessibility problems and interfere with accessibility checking.

@@http://lists.w3.org/Archives/Public/w3c-wai-au/2008JulSep/0083.html@@

Level A Success Criteria for Guideline B.2.4
Level AA Success Criteria for Guideline B.2.4
  • B.2.4.3 Acceptable Sources: Authoring tools only supply equivalent alternatives from the following sources:
    • (a) Author-Entered: equivalent alternatives previously entered by authors for the same non-text object (e.g., by the same author, or another author on a collaborative system),
    • (b) From Object Database: equivalent alternatives stored with the non-text object in an object database (or equivalent),
    • (c) Null when Appropriate: null equivalent alternatives for non-text objects that the authoring tool recognizes are only used for pure decoration, or
    • (d) Audio, Video, or CART Analysis: automatic video or audio analysis (e.g., speech recognition).
Level AAA Success Criteria for Guideline B.2.4
  • B.2.4.4 Save for Reuse: Authors can store, for future reuse, both of the following author-assigned equivalent alternatives (as applicable):

Note: Equivalent alternatives should not be automatically generated from unreliable sources (e.g., file names should not be used as text alternatives).

Guideline B.2.5 Assist authors with accessible templates and other pre-authored content. [Techniques]

Rationale: As with automatically-generated content (see Guideline B.1.3), Templates and other pre-authored content (e.g., clip art, synchronized media, widgets, etc.) that are not accessible impose additional repair tasks on authors.

Applicability Notes:
  • Templates may be complicated to check for accessibility due to their inherent incompleteness. The accessibility status of templates is instead measured by the accessibility of content (in the final technology) created through their proper use.
Level A Success Criteria for Guideline B.2.5
  • B.2.5.1 Templates "A" Accessible: If the authoring tool automatically selects templates or pre-authored content, then the selection meets WCAG Level A when used.
  • B.2.5.2 Provide Accessible Templates: If the authoring tool provides templates, then there are accessible template options for a range of template uses.
  • B.2.5.3 Template Selection Mechanism: If authors are provided with a template selection mechanism, then both of the following are true:
    • (a) Indicate: the selection mechanism indicates the accessibility status of templates (if known),
    • (b) Prominence: any accessible template options have prominence that is comparable with that of other options in the selection mechanism.
Level AA Success Criteria for Guideline B.2.5
  • B.2.5.4 Templates "AA" Accessible: If the authoring tool automatically selects templates or pre-authored content, then the selection meets WCAG Level AA when used.
  • B.2.5.5 New Templates: If authors can use the authoring tool to create new templates for use by a template selection mechanism, they have the option to record the accessibility status of the new templates.
  • B.2.5.6 Templates in Repository: If the authoring tool provides a repository of templates, then each of the templates has a recorded accessibility status.
  • B.2.5.7 Pre-Authored Content Selection Mechanism: If authors are provided with a selection mechanism for pre-authored content other than templates (e.g., clip art gallery, widget repository, design themes), then both of the following are true:
    • (a) Indicate: the selection mechanism indicates the accessibility status of the pre-authored content (if known),
    • (b) Prominence: any accessible options have prominence that is comparable with that of other options in the selection mechanism.
  • B.2.5.8 Pre-Authored Content in Repository: If the authoring tool provides a repository of pre-authored content, then each of the content objects has a recorded accessibility status.
Level AAA Success Criteria for Guideline B.2.5
  • B.2.5.9 Templates "AAA" Accessible: If the authoring tool automatically select templates or pre-authored content, then the selection meets WCAG Level AAA when used.

PRINCIPLE B.3: Accessibility solutions must be promoted and integrated

Note: In addition to the normative requirements of this principle, implementers should also consider close integration of features that support accessible authoring with the "look-and-feel" of other features of the authoring tool. This type of integration has the potential to:

  • produce a more seamless product;
  • leverage the existing knowledge and skills of authors;
  • make authors more receptive to new authoring requirements; and
  • reduce the likelihood of confusion.

However, whenever new features are introduced into an authoring tool, striking the right design balance between the similarity with existing features and the provision of new functionality is often more of an art than a science.

Guideline B.3.1 Ensure that accessible authoring actions are given prominence. [Techniques]

Rationale: Some authors are most likely to use the first and easiest authoring action they encounter in the authoring tool user interface that achieves their intended mainstream rendered outcome.

Level A Success Criteria for Guideline B.3.1
Level AA Success Criteria for Guideline B.3.1
  • B.3.1.2 Accessibile Actions Prominent (Enhanced): If authors are provided with a choice of authoring actions to achieve the same mainstream rendered outcome, then actions that implement accessible authoring practices are more prominent than the other action(s).
Level AAA Success Criteria for Guideline B.3.1
  • (No level AAA success criteria for Guideline B.3.1)

Guideline B.3.2 Ensure that sequential authoring processes integrate accessible authoring practices. [Techniques]

Rationale: When accessibility considerations are a natural part of the workflow, they become a routine part of authoring.

Level A Success Criteria for Guideline B.3.2
  • (No level A success criteria for Guideline B.3.2)
Level AA Success Criteria for Guideline B.3.2
  • B.3.2.1 Sequencing Features: Function that sequences authoring actions for authors (e.g., wizards) provide any accessibility prompts relevant to the content being edited at or before the first opportunity to successfully complete the function.
  • B.3.2.2 Sequenced Instructions: Instructions (e.g., tutorials, reference manuals, design guides) that consist of a sequence of steps for authors to follow include the relevant accessibility authoring practices in the sequence before the first opportunity to successfully complete the sequence.
Level AAA Success Criteria for Guideline B.3.2
  • (No level AAA success criteria for Guideline B.3.2)

Guideline B.3.3 Ensure that features of the authoring tool supporting the production of accessible content are available. [Techniques]

Rationale: The accessible content support features will be more likely to be used if they are turned on and are afforded reasonable prominence within the authoring tool user interface.

Level A Success Criteria for Guideline B.3.3
  • B.3.3.1 Active by Default: All accessible content support features are active by default.
  • B.3.3.2 Reactivate Option: If authors deactivate an accessible content support feature, then they can always reactivate the feature.
Level AA Success Criteria for Guideline B.3.3
Level AAA Success Criteria for Guideline B.3.3
  • (No level AAA success criteria for Guideline B.3.3)

Guideline B.3.4 Ensure that features of the authoring tool supporting the production of accessible content are documented. [Techniques]

Rationale: Without documentation of the features that support the production of accessible content (e.g., prompts for alternatives, accessibility checkers), some authors may not be able to find or use them.

Level A Success Criteria for Guideline B.3.4
Level AA Success Criteria for Guideline B.3.4
  • (No level AA success criteria for Guideline B.3.4)
Level AAA Success Criteria for Guideline B.3.4
  • B.3.4.2 Accessible Authoring Tutorial: A tutorial on the accessible authoring process that is specific to the authoring tool is provided.

Guideline B.3.5 Ensure that any authoring practices demonstrated in documentation are accessible. [Techniques]

Rationale: Demonstrating accessible authoring as routine practice will encourage its acceptance by some authors.

Applicability Notes:
  • An exception to these success criteria is allowed for examples that are specifically intended to demonstrate inaccessible practices to be avoided.
Level A Success Criteria for Guideline B.3.5
  • (No level A success criteria for Guideline B.3.5)
Level AA Success Criteria for Guideline B.3.5
Level AAA Success Criteria for Guideline B.3.5
  • B.3.5.2 Model "AA" Accessible Practice: Any examples of authoring practices in the documentation demonstrate WCAG Level AA accessible authoring practices.

Conformance

This section is normative.

Conformance means that the authoring tool satisfies the success criteria defined in the guidelines section. This conformance section describes conformance, and lists the conformance requirements.

Conformance Claims

A conformance claim is an assertion by a claimant that an authoring tool has satisfied the requirements of a chosen ATAG 2.0 conformance profile.

Conditions on Conformance Claims

Required Components of an ATAG 2.0 Conformance Claim

  1. The date of the claim.
  2. The ATAG 2.0 version, publishing date and status (e.g., "Authoring Tool Accessibility Guidelines 2.0, 27 April 2007, Editor's Draft ")
  3. The name of the authoring tool and sufficient additional information to specify the version (e.g., vendor name, version number, minor release number, required patches or updates, natural language of the user interface or documentation). The version information may be a range (e.g., "this claim refers to version 6.x").
    • If the authoring tool is a collection of software components (e.g., a markup editor, an image editor, and a validation tool), then information must be provided separately for each component, although the conformance claim will treat them as a whole. Note: The burden is on the conformance claimant rather than the developer of any of the software components.
  4. The conformance profile, which must include the following:
    • (a) The ATAG 2.0 conformance level that has been satisfied (choose one of: "A", "AA", "AAA").
    • (b) A list of the Web content technologies edited/produced by the authoring tool. These are the only technologies covered by the conformance claim.
      • The list must include at least one Web content technology for the conformance claim to be valid.
      • When Web content technologies are typically produced together (e.g., HTML 4.01 and JavaScript), they can be listed separately or together in the list.
    • (c) A list of any other Web content technologies that the authoring tool can include (e.g., by reference) and that they claimant wishes to include in the claim.
    • (d) A list of any other Web content technologies produced by the authoring tool that are not covered by the claim.
    • (e) The platform(s) upon which all or part (e.g., help system) of the authoring tool was evaluated:
      • For user agent platform(s) used to evaluate Web-Based user interface functionality, provide:
        • The name and version information of the user agent(s).
        • The version and URI of the Web Content Accessibility Guidelines document used to evaluate the accessibility of the Web-based functionality.
      • For non-user agent platforms, provide:
        • The name and version information of the platform(s) (e.g., operating system, Java virtual machine, etc.).
        • The name and version of the accessibility platform architecture(s) employed.

Optional Components of an ATAG 2.0 Conformance Claim

  1. A description of the authoring tool that identifies the types of editing views that it includes.
  2. A description of how the normative ATAG 2.0 success criteria were met where this may not be obvious.

"Progress Towards Conformance" Statement

Developers of authoring tools that do not yet conform fully to a particular ATAG 2.0 conformance level are encouraged to publish a statement on progress towards conformance. This statement would be the same as a conformance claim except that this statement would specify an ATAG 2.0 conformance level that is being progressed towards, rather than one already satisfied, and report the progress on success criteria not yet met. The author of a "Progress Towards Conformance" Statement is solely responsible for the accuracy of their statement. Developers are encouraged to provide expected timelines for meeting outstanding success criteria within the Statement.

Disclaimer

Neither W3C, WAI, nor WAI-AUWG take any responsibility for any aspect or result of any ATAG 2.0 conformance claim or Web Content Accessibility Benchmark document that has not been published under the authority of the W3C, WAI, or WAI-AUWG.


Appendix A: Glossary

This section is normative.

abbreviation [WCAG 2.0]
Shortened form of a word, phrase, or name where the abbreviation has not become part of the language. Includes:
  1. initialism: shortened forms of a name or phrase made from the initial letters of words or syllables contained in that name or phrase (e.g., ESP is an initialism for extrasensory perception).
  2. acronym: abbreviated forms made from the initial letters or parts of other words (in a name or phrase) which may be pronounced as a word (e.g., WAI is an acronym made from the initial letters of the Web Accessibility Initiative).
accessibility platform architecture
A programmatic interface that is specifically engineered to enhance communication between mainstream software applications and assistive technologies (e.g., MSAA and IAccessible2 for Windows applications, Gnome Accessibility Toolkit API for Gnome applications, Java Access for Java applications). On some platforms it may be conventional to enhance communication further via implementing a document object.
accessibility problem
ATAG 2.0 refers to two types of accessibility problems:
  1. authoring tool user interface accessibility problem: An aspect of an authoring tool user interface that does not to meet one of the guideline success criteria in Part A of this document. The severity of a given problem is reflected in the level of the failed success criteria.
  2. Web content accessibility problem: An aspect of Web content that does not meet some accessibility requirement. The severity of a given problem is relative and is determined by WCAG.
accessibility information
Any information that is necessary for undertaking an accessible authoring practice (e.g., equivalent alternatives, role and state information, relationships within complex tables).
accessible content support features
Any features of an authoring tool that directly support authors in increasing the accessibility of the content being authored. Specifically, this will include any functionality that is used to meet the success criteria for B.2.1, B.2.2, B.2.3, B.2.4, and B.2.5.
ASCII art [WCAG 2.0]
Picture created by a spatial arrangement of characters or glyphs (typically from the 95 printable characters defined by ASCII).
assistive technology [WCAG 2.0, UAAG 1.0]
Software and/or hardware that provides services to meet the requirements of users with disabilities that go beyond direct accessibility features offered by mainstream software applications and hardware. Such services include alternative presentations (e.g., as synthesized speech or magnified content), alternative input methods (e.g., voice), additional navigation or orientation mechanisms, and content transformations (e.g., to make tables more accessible). Examples of assistive technologies that are important in the context of this document include the following:
  • screen magnifiers, and other visual reading assistants, which are used by people with visual, perceptual and physical print disabilities to change text font, size, spacing, color, synchronization with speech, etc in order improve the visual readability of rendered text and images;
  • screen readers, which are used by people who are blind to read textual information through synthesized speech or braille;
  • text-to-speech software, which is used by some people with cognitive, language, and learning disabilities to convert text into synthetic speech;
  • voice recognition software, which may be used by people who have some physical disabilities;
  • alternative keyboards, which are used by people with certain physical disabilities to simulate the keyboard;
  • alternative pointing devices, which are used by people with certain physical disabilities to simulate mouse pointing and button activations.
Mainstream software applications and hardware may also provide services directly that meet the requirements of users with disabilities.
audio description - also called described video, video description and descriptive narration [WCAG 2.0]
An equivalent alternative that takes the form of narration added to the soundtrack to describe important visual details that cannot be understood from the main soundtrack alone. Audio description of video provides information about actions, characters, scene changes, on-screen text, and other visual content. In standard audio description, narration is added during existing pauses in dialogue. In extended audio description, the video is paused so that there is time to add additional description.
authoring action
Any action that authors take using the authoring tool user interface with the intention of editing content (e.g., typing text, deleting, inserting an element, applying a template). Most authoring tool user interfaces also enable actions that do not edit content (e.g., setting preferences for the tool, searching the help system).
authoring outcome
A characteristic of content that results from one or more authoring actions being applied. Authoring outcomes exist at different levels (e.g., making a paragraph bold vs. deploying a site-wide navigation system) and are cumulative (e.g., text is entered, then styled, then made into a link, then given title). Mainstream rendered (authoring) outcomes are only the subset of content characteristics that are apparent to end-users of mainstream user agents (e.g., text that is bold, a seamless patchwork of images; but not commented code or table relationships). Often, multiple authoring practices exist that will result in the same mainstream rendered authoring outcome, but the outcomes may differ with respect to accessibility (e.g., styled text may appear identical to an image of text on the screen, but will appear differently in audio output).
authoring practice
A technique that guides authors or the authoring tool in selecting authoring actions to apply to content in order to achieve particular authoring outcomes. (e.g., controlling presentation with style sheets, commenting code, testing on multiple browsers). An accessible authoring practice is one that seeks to avoid or correct one or more Web content accessibility problems. Accessible authoring practices sometimes require accessibility information.
authoring session
A state of the authoring tool during which content can be edited by the author. The end of an authoring session is the point in time at which a session ends and the author has no further opportunity to make changes without starting another session. This may be under the control of the author (e.g., closing a document, publishing) or it may be controlled by the authoring tool (e.g., when the authoring tool transfers editing permission to another author on a collaborative system).
authoring tool user interface (non-Web-Based)
Any components of an authoring tool user interface that is not implemented as Web content and instead runs directly on a non-user agent platform such as Windows, MacOS, Java Virtual Machine, etc.
authoring tool user interface (Web-based)
Any components of an authoring tool user interface, including editing views, documentation, etc., that is implemented using Web content technologies and is rendered by a user agent. Since Web-based tools may be implemented in the same Web content technologies that they are used to edit, the distinction between the tool's content dependent and content independent functions may be less clear than with non-Web-based authoring tools.
authoring tool user interface
The display and control mechanism that authors use to communicate with and operate the authoring tool software. User interfaces may be non-Web-based or Web-based or a combination (e.g., a non-Web-based authoring tool might have Web-based help pages). User interfaces include content independent functions and content dependent functions. An accessible authoring tool user interface is one that meets the success criteria in Part A (i.e., does not include any authoring tool user interface accessibility problems). The level of accessibility is determined by the levels of the satisfied success criteria.
authoring tool
ATAG 2.0 defines an "authoring tool" as any software, or collection of software components, that authors can use to create or modify Web content for use by other people. Also see "Definition of authoring tool" section.
author permission
Whether a person has a right to modify given Web content. In other words, whether they qualify as an author of the content. Some authoring tools are capable of managing authoring permissions in order to prevent unauthorized modifications.
authors
Any person using an authoring tool to create or modify Web content for use by other people. This may include content authors, designers, programmers, publishers, testers, etc. working either alone or collaboratively. A person will only qualify as an author of given Web content if the (1) the authoring tool provides functionality to create or modify the relevant Web content technology and (2) the person has author permission for that particualr Web content.
blink [WCAG 2.0]
Switch back and forth between two visual states in a way that is meant to draw attention. It is possible for something to be large enough and blink brightly enough at the right frequency to be also classified as a flash.
captions [WCAG 2.0]
An equivalent alternative that takes the form of text presented and synchronized with synchronized media to provide not only the speech, but also non-speech information conveyed through sound, including meaningful sound effects and identification of speakers. In some countries, the term "subtitle" is used to refer to dialogue only and "captions" is used as the term for dialogue plus sounds and speaker identification. In other countries, "subtitle" (or its translation) is used to refer to both.
change of context [WCAG 2.0]
Change of view or focus. Content that changes the function or meaning of an interface. A change of content is not always a change of context. Small changes in content, such as an expanding outline or dynamic menu, do not change the context.
checking (accessibility) - also called accessibility evaluation [EARL 1.0]
The process by which Web content is evaluated for Web content accessibility problems. ATAG 2.0 identifies three types of checking, based on increasing levels of automation of the tests:
  1. manual checking: where the tests are carried out by authors. This includes the case where the authors are aided by instructions or guidance provided by the authoring tool, but where authors must carry out the actual test procedure;
  2. semi-automated checking: where the tests are partially carried out by the authoring tool, but where authors' input or judgment is still required to decide or help decide the outcome of the tests; and
  3. automated checking: where the tests are carried out automatically by the authoring tool without any intervention by the authors.
An authoring tool may support any combination of checking types.
collection of software components
Any software programs that are used either together (e.g., base tool and plug-in) or separately (e.g., markup editor, image editor, and validation tool), regardless of whether there has been any formal collaboration between the developers of the programs.
content being edited
The Web content that is currently being modified by the authoring tool for use by other people.
content generation
ATAG 2.0 refers to two broad categories of content generation:
  1. author-generated content: When authors specify content (e.g., typing markup into a text editor, choosing an element by name from a list, entering information into a dialog box).
  2. automatically-generated content: When the authoring tool specifies content (e.g., applying a template, automatically correcting markup errors, dynamically generated content) as programmed by the developer.
content (Web) - or shortened to content [WCAG 2.0]
Information and sensory experience to be communicated to the user by means of a user agent, including code or markup that defines the content's structure, presentation, and interactions. In ATAG 2.0, "content" is primarily used in the context of the output that is produced by the authoring tool. This includes Web applications, including those that, in turn, act as Web-based authoring tools. Accessible Web content is Web content that does not contain accessibility problems. Usually this refers to a particular level of accessibility (e.g., Web content that meets Level "A" Web content accessibility). Accessible Web content is shorthand for content that meets a given set of accessibility criteria. This does not not necessarily mean that it will be accessible to every person with a disability.
content rendering
User interface functionality that the authoring tool presents as it renders, plays or executes Web content. In this document the term covers conventional renderings (e.g., "WYSIWYG"), unconventional renderings (e.g., rendering an audio file as a graphical wavefront) and partial renderings, in which some aspects of the content are rendered, played, or executed, but not others (e.g., a frame-by-frame video editor renders the graphical, but not the temporal aspect, of a video).
conversion
A process that takes as input, content in one Web content technology (or non-Web content technology, such as a word processing format) and produces as output, content in a different Web content technology (e.g., "Save as HTML" functions).
developer
Any people responsible for programming the authoring tool. This will include the programmers of any components included by the claimant in the conformance claim. In some cases, development of the authoring tool is complete before the author uses it, however in other cases (e.g., some Web-based tools) the developer may continue to modify the authoring tool after content is published by the author such that the Web content experienced by the end user is modified.
direct accessibility
Features of mainstream software applications and hardware that augment accessibility by people with disabilities (e.g., keyboard navigation, zoom functions, text-to-speech).
display settings
ATAG 2.0 refers to two types of display settings:
  1. display settings (audio): the characteristics of audio output of music, sounds and speech and include volume, speech voices, voice speed, and voice emphasis.
  2. display settings (visual): the characteristics of the on-screen rendering of text and graphics and include fonts, sizes, colors, spacing, positioning, and contrast.
documentation
Any information that supports the use of an authoring tool. This information may be found electronically or otherwise and includes help, manuals, installation instructions, sample workflows, and tutorials, etc.
document object
The internal representation of data in the source content by a destop authoring tool or user agent. The document object may form part of an accessibility platform architecture that enables communication with assistive technologies. Web-based authoring tools essentially leverage the document object that is maintained by the user agent.
element
A pair of tags and their content, or an "empty" tag - one that requires no closing tag or content (used in the same sense as in HTML and XML).
end user
A person who interacts with Web content once it has been authored. This includes people using assitive technologies.
equivalent alternative
Content that is an acceptable substitute for other content that a person may not be able to access. An equivalent alternative fulfills essentially the same function or purpose as the original content upon presentation:
  1. text alternative [WCAG 2.0]: text that is available via the platform that is used in place of non-text content.
  2. full text alternative for synchronized media including any interaction [WCAG 2.0]: document including correctly sequenced text descriptions of all visual settings, actions, speakers, and non-speech sounds, and transcript of all dialogue combined with a means of achieving any outcomes that are achieved using interaction (if any) during the synchronized media.
  3. synchronized alternatives: present essential audio information visually (i.e., captions) and essential video information in an auditory manner (i.e., audio descriptions).
flash [WCAG 2.0]
A pair of opposing changes in relative luminance that can cause seizures in some people if it is large enough and in the right frequency range. See general flash threshold and red flash threshold for information about types of flash that are not allowed. See also blink.
general flash and red flash thresholds [WCAG 2.0]
A sequence of flashes or rapidly changing image sequences where all three of the following occur:
  1. there are more than three flashes within any one-second period,
  2. the flashing is below 50 Hz, and
  3. the combined area of flashes occurring concurrently and contiguously occupies more than a total of .006 steradians (25% of any 10 degree visual field on the screen).
Notes: For the general flash threshold, a flash is defined as a pair of opposing changes in relative luminance of 10% or more and the relative luminance of the darker image is below 0.80. An "opposing change" is an increase followed by a decrease, or a decrease followed by an increase. For the red flash threshold, a flash is defined as any transition to or from a saturated red. For general Web content, using a 341 x 256 pixel rectangle anywhere on the displayed screen area when the content is viewed at 1024 x 768 pixels will provide a good estimate of a 10 degree visual field for standard screen sizes and viewing distances.
human language
Language that is spoken, written or signed (through visual or tactile means ) to communicate with humans.
inform
To provide authors with information via the authoring tool user interface. Informing mechanisms range from unobtrusive (i.e., information presented without stopping the authors' current activity) to intrusive (i.e., interrupting the author's current activity). Information may be provided as part of a prompt.
informative [WCAG 2.0]
For information purposes and not required for conformance.
label [WCAG 2.0]
Text or other component with a text alternative that is presented to authors to identify a component. A label is presented to all authors whereas the name may be hidden and only exposed by assistive technology. In many (but not all) cases the name and the label are the same.
mainstream applications and hardware - also called mainstream technology
Software applications and hardware for which augmenting accessibility is secondary to some other purpose (as opposed to assistive technology where it is the primary purpose). Mainstream technologies may include direct accessibility features.
markup
A set of tags from a markup language. Markup can be presentational (i.e., markup that encodes information about the visual layout of the content), structural (i.e., markup that encodes information about the structural role of elements of the content) or semantic (i.e., markup that encodes information about the intended meaning of the content). A markup language is a syntax and/or set of rules to manage markup (e.g., HTML, SVG, MathML).
name [WCAG 2.0]
Text by which software can identify a component to the user. The name may be hidden and only exposed by assistive technology, whereas a label is presented to all users. In many (but not all) cases, the label and the name are the same.
non-text content [WCAG 2.0]
Any content that is not a sequence of characters that can be made available via the platform or where the sequence is not expressing something in human language. This includes ASCII Art (which is a pattern of characters), emoticons, leetspeak (which is character substitution), and images representing text.
normative [WCAG 2.0, UAAG 2.0]
Required for conformance. One may conform in a variety of well-defined ways to this document. Content identified as "informative" or "non-normative" is never required for conformance.
platform
The software environment within which the authoring tool operates. For non-Web-based user interface functionality this will be an operating system (e.g., Windows, MacOS, Linux), virtual machine (e.g., JVM) or a higher level GUI toolkit (e.g., Eclipse). For Web-based authoring user interface functionality, "platform" applies more generically to user agents in general, although for purposes of evaluating conformance to ATAG 2.0 a specific user agent(s) will be listed in the conformance profile. Available via the platform: For non-Web-based user interface functionality this means via an implemented accessibility platform architecture. For Web-based user interface functionality this means following relevant Web content accessibility design guidelines so that the user agent can pass on the information.
plug-in [UAAG 2.0]
A program that runs as part of the authoring tool (e.g., a third-party evaluation and repair tool) and that is not part of content being edited. Authors generally choose to include or exclude plug-ins from their authoring tool.
presentation [WCAG 2.0]
Rendering of the content in a form to be perceived by authors.
prominence
A heuristic measure of the degree to which authors are likely to notice components in the authoring tool user interface when operating the authoring tool. In this document, prominence refers to visual as well as keyboard-driven navigation. Some of the factors that contribute to the prominence of a component include:
  1. component size (large items or items surrounded by extra white space may appear to be conferred higher importance),
  2. components order (items that occur early in the "localized" reading order (e.g., left to right and top to bottom; right to left and top to bottom) are conferred higher importance),
  3. components grouping (grouping items together can change the reading order and the related judgments of importance),
  4. advanced options (when the properties are explicitly or implicitly grouped into sets of basic and advanced properties, the basic properties may gain apparent importance), and
  5. highlighting (items may be distinguished from others using icons, color, styling).
prompt [UAAG 2.0]
Any authoring tool initiated request for a decision or piece of information from authors. Well designed prompting will urge, suggest, and encourage authors.
publishing
The point at which the authors of content intend to make it available to end users (e.g., uploading a Web page, committing a change in a wiki).
recognize
When an authoring tool is able to process encoded information, such as properties or relationships, with certainty. For example, an authoring tool would only be able to recognize a particular text string as a text label for a non-text object, if this relationship was appropriately encoded (e.g., in an "alt" attribute, by a "labelledby" property).
relationships [WCAG 2.0]
Meaningful associations between distinct pieces of content.
relative luminance [WCAG 2.0]
The relative perceived brightness of any point, normalized to 0 for darkest black and 1 for lightest white.
Note 1: The relative luminance of an sRGB color is defined as L = 0.2126 * R + 0.7152 * G + 0.0722 * B where R, G and B are defined as:
  • if RsRGB <= 0.03928 then R = RsRGB/12.92 else R = ((RsRGB+0.055)/1.055) ^ 2.4
  • GsRGB <= 0.03928 then G = GsRGB/12.92 else G = ((GsRGB+0.055)/1.055) ^ 2.4
  • if BsRGB <= 0.03928 then B = BsRGB/12.92 else B = ((BsRGB+0.055)/1.055) ^ 2.4
and RsRGB, GsRGB, and BsRGB are defined as:
  • RsRGB = R8bit/255
  • GsRGB = G8bit/255
  • BsRGB = B8bit/255
The "^" character is the exponentiation operator. (Formula taken from [sRGB] and [IEC-4WD]).
Note 2: Almost all systems used today to view Web content assume sRGB encoding. Unless it is known that another color space will be used to process and display the content, authors should evaluate using sRGB colorspace.
Note 3: For dithered colors, use average values of the colors used (average R, average G, and average B).
Note 4: Tools are available that automatically do the calculations when testing contrast and flash.
repairing (accessibility) [EARL 1.0]
The process by which Web content accessibility problems that have been identified within content are resolved. ATAG 2.0 identifies three types of repairing, based on increasing levels of automation:
  1. manual: where the repairs are carried out by authors. This includes the case where the authors are aided by instructions or guidance provided by the authoring tool, but where authors carry out the actual repair procedure;
  2. semi-automated: where the repairs are partially carried out by the authoring tool, but where authors' input or judgment is still required to complete the repair; and
  3. automated: where the repairs are carried out automatically by the authoring tool without any intervention by the authors.
reversible actions
Authoring actions that, by their nature, can be completely undone so that the system returns to the state it was in before the action. Actions that are not reversible may include certain save and delete actions as well as actions made in a collaborative environment that another author has begun to work with.
role [WCAG 2.0]
Text or a number by which software can identify the function of a component within Web content (e.g., a number that indicates whether an image functions as a hyperlink, command button, or check box).
structured element set
Content that consists of organized elements (e.g., lists, maps, hierarchies, graphs).
synchronized media [WCAG 2.0]
Audio or video synchronized with another format for presenting information and/or with time-based interactive components.
technology (Web content) - or shortened to technology [WCAG 2.0, UAAG 2.0]
A mechanism for encoding instructions to be rendered, played or executed by user agents. Web Content technologies may include markup languages, data formats, or programming languages that authors may use alone or in combination to create end-user experiences that range from static Web pages to multimedia presentations to dynamic Web applications. Some common examples of Web content technologies include HTML, CSS, SVG, PNG, PDF, Flash, and JavaScript.
template
A content pattern that is filled in by authors or the authoring tool to produce content for end users (e.g., document templates, content management templates, presentation themes). Often templates will pre-specify at least some authoring decisions.
template selection mechanism
A function that allows authors to select templates to use as the basis for new content or to apply to existing content.
transformation
A process that takes content in one Web content technology as input and outputs different content in the same technology (e.g., a function that transforms tables into lists).
tutorial
A type of documentation that involves the sequential presentation of instructions for performing multi-part tasks.
user agent [WCAG 2.0, UAAG 2.0]
Any software that retrieves and presents Web content for end users. Examples include Web browsers, media players, plug-ins, and other programs including assistive technologies, that help in retrieving, rendering and interacting with Web content.
user interface component [WCAG 2.0]
A part of the user interface "chrome" or content display (including renderings) that is perceived by authors as a single control for a distinct function. In ATAG 2.0, the term is used to denote any part of the user interface of the authoring tool involved with display or control.
video [WCAG 2.0]
The technology of moving pictures or images. Video can be made up of animated or photographic images, or both.
view
User interface functionality that authors use to interact with the content being edited. In addition to being editable (i.e., editing views) or non-editable (e.g. a preview that presents content as it would appear in a user agent), there are several broad approaches to presenting the content:
  1. source content in which the *document source* is presented (e.g., plain text editors, form-based editing views that provide direct access to the unrendered content (e.g., selecting attribute values),
  2. content rendering, and
  3. meta-content in which authors set high-level options that the authoring tool then interprets to generate the resulting content (e.g., a content management system that only lets authors set the month and year on a built-in calendar module).
workflow
A customary sequence of steps or tasks authors follow to produce a deliverable.

Appendix B: How to refer to ATAG 2.0 from other documents

This section is informative.

There are two recommended ways to refer to the "Authoring Tool Accessibility Guidelines 2.0" (and to W3C documents in general):

  1. References to a specific version of "Authoring Tool Accessibility Guidelines 2.0." For example, use the "this version" URI to refer to the current document: http://www.w3.org/TR/2007/@@@@.
  2. References to the latest version of "Authoring Tool Accessibility Guidelines 2.0." Use the "latest version" URI to refer to the most recently published document in the series: http://www.w3.org/TR/2008/@@@@/.

In almost all cases, references (either by name or by link) should be to a specific version of the document. W3C will make every effort to make this document indefinitely available at its original address in its original form. The top of this document includes the relevant catalog metadata for specific references (including title, publication date, "this version" URI, editors' names, and copyright information).

An XHTML 1.0 paragraph including a reference to this specific document might be written:

<p>
<cite><a href="http://www.w3.org/TR/2007/@@@@/">
"Authoring Tool Accessibility Guidelines 2.0,"</a></cite>
J. Treviranus, J. Richards, eds.,
W3C Recommendation, @@@@.
The <a href="http://www.w3.org/TR/2008/@@@@/">latest version</a> of this document is available at http://www.w3.org/TR/2008/@@@@/.</p>

For very general references to this document (where stability of content and anchors is not required), it may be appropriate to refer to the latest version of this document. Other sections of this document explain how to build a conformance claim.


Appendix C: References

This section is informative.

For the latest version of any W3C specification please consult the list of W3C Technical Reports at http://www.w3.org/TR/. Some documents listed below may have been superseded since the publication of this document.

Note: In this document, bracketed labels such as "[WCAG20]" link to the corresponding entries in this section. These labels are also identified as references through markup.

[ATAG10]
"Authoring Tool Accessibility Guidelines 1.0", J. Treviranus, C. McCathieNevile, I. Jacobs, and J. Richards, eds., 3 February 2000. This W3C Recommendation is available at http://www.w3.org/TR/2000/REC-ATAG10-20000203/.
[CSS2-ACCESS]
"Accessibility Features of CSS," I. Jacobs and J. Brewer, eds., 4 August 1999. This W3C Note is available at http://www.w3.org/1999/08/NOTE-CSS-access-19990804. The latest version of Accessibility Features of CSS is available at http://www.w3.org/TR/CSS-access.
[IEC-4WD]
IEC/4WD 61966-2-1: Colour Measurement and Management in Multimedia Systems and Equipment - Part 2.1: Default Colour Space - sRGB. May 5, 1998.
[SMIL-ACCESS]
"Accessibility Features of SMIL," M.-R. Koivunen and I. Jacobs, eds., 21 September 1999. This W3C Note is available at available at http://www.w3.org/TR/SMIL-access.
[sRGB]
"A Standard Default Color Space for the Internet - sRGB," M. Stokes, M. Anderson, S. Chandrasekar, R. Motta, eds., Version 1.10, November 5, 1996. A copy of this paper is available at http://www.w3.org/Graphics/Color/sRGB.html.
[SVG-ACCESS]
"Accessibility of Scalable Vector Graphics," C. McCathieNevile, M.-R. Koivunen, eds., 7 August 2000. This W3C Note is available at http://www.w3.org/TR/SVG-access.
[UAAG]
"User Agent Accessibility Guidelines 1.0," I. Jacobs, J. Gunderson, E. Hansen, eds.17 December 2002. This W3C Recommendation is available at http://www.w3.org/TR/2002/REC-UAAG10-20021217/.
[WCAG10]
"Web Content Accessibility Guidelines 1.0", W. Chisholm, G. Vanderheiden, and I. Jacobs, eds., 5 May 1999. This WCAG 1.0 Recommendation is available at http://www.w3.org/TR/1999/WAI-WEBCONTENT-19990505/.
[WCAG10-TECHS]
"Techniques for Web Content Accessibility Guidelines 1.0," W. Chisholm, G. Vanderheiden, and I. Jacobs, eds., 6 November 2000. This W3C Note is available at http://www.w3.org/TR/WCAG10-TECHS/.
[WCAG20]
"Web Content Accessibility Guidelines 2.0 ", B. Caldwell, M. Cooper, L. Guarino Reid, and G. Vanderheiden.
[WCAG20-TECHS]
"Techniques for WCAG 2.0," B. Caldwell, M. Cooper, L. Guarino Reid, G. Vanderheiden, eds. Note: This document is still a working draft.
[WCAG20-UNDERSTANDING]
"Understanding (WCAG 2.0)," B. Caldwell, M. Cooper, L. Guarino Reid, G. Vanderheiden, eds. Note: This document is still a working draft.
[XAG]
"XML Accessibility Guidelines", D. Dardailler, S. B. Palmer, C. McCathieNevile, eds. 3 October 2002. This is a Working Group Draft.

Appendix D: Acknowledgments

Appendix Editors:

Participants active in the AUWG at the time of publication:

Other previously active AUWG participants and other contributors to ATAG 2.0:

Kynn Bartlett, Giorgio Brajnik, Judy Brewer, Wendy Chisholm, Daniel Dardailler, Geoff Deering, Barry A. Feigenbaum, Katie Haritos-Shea, Kip Harris, Phill Jenkins, Len Kasday, Marjolein Katsma, William Loughborough, Karen Mardahl, Charles McCathieNevile, Matt May, Matthias Müller-Prove, Liddy Nevile, Graham Oliver, Wendy Porch, Bob Regan, Chris Ridpath, Gregory Rosmaita, Heather Swayne, Gregg Vanderheiden, Carlos Velasco, and Jason White.

This document would not have been possible without the work of those who contributed to ATAG 1.0.

This publication has been funded in part with Federal funds from the U.S. Department of Education under contract number ED05CO0039. The content of this publication does not necessarily reflect the views or policies of the U.S. Department of Education, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.


Appendix E: Checklist


Appendix F: Comparison of ATAG 1.0 guidelines to ATAG 2.0


Level Double-A conformance icon, W3C-WAI Web Content Accessibility Guidelines 1.0


[Contents] [Techniques] [Checklist]