EXI is the result of extensive work carried out by the W3C's XML Binary Characterization (XBC) and Efficient XML Interchange (EXI) Working Groups. XBC was chartered to investigate the costs and benefits of an alternative form of XML, and formulate a way to objectively evaluate the potential of a substitute format for XML. Based on XBC's recommendations, EXI was chartered, first to measure, evaluate, and compare the performance of various XML technologies (using metrics developed by XBC ), and then, if it appeared suitable, to formulate a recommendation for a W3C format specification. The measurements results and analyses, are presented elsewhere . The format described in this document is the specification so recommended.

The functional requirements of the EXI format are those that were prepared by the XBC WG in their analysis of the desirable properties of a high performance representation for XML . Those properties were derived from a very broad set of use cases also identified by the XBC working group .

The design of the format presented here, is largely based on the results of the measurements carried out by the group to evaluate the performance characteristics (mainly of processing efficiency and compactness) of various existing formats. The EXI format is based on Efficient XML , including for example the basis heuristic grammar approach, compression algorithm, and resulting entropy encoding.

EXI is compatible with XML at the XML Information Set level, rather than at the XML syntax level. This permits it to encapsulate an efficient alternative syntax and grammar for XML, while facilitating at least the potential for minimizing the impact on XML application interoperability.

The key words MUST, MUST NOT, REQUIRED, SHALL, SHALL NOT, SHOULD, SHOULD NOT, RECOMMENDED, MAY, and OPTIONAL, when they appear EMPHASIZED in this document, are to be interpreted as described in RFC 2119 . Other terminology used to describe the EXI format is defined in the body of this specification.

The term event and stream is used throughout this document to denote EXI event and EXI stream respectively unless the words are qualified differently to mean otherwise.

This document specifies an abstract grammar for EXI. In grammar notation, all terminal symbols are represented in plain text and all non-terminal symbols are represented in italics. Grammar productions are represented as follows:

A set of one or more grammar productions that share the same left-hand side non-terminal symbol are often presented together annotated with event codes that specify how events matching the terminal symbols of the associated productions are represented in the EXI stream as follows:

Section introduces additional notations for describing productions and event codes in grammars. Those additional notations facilitate concise representation of the EXI grammar system.

In this document, the term qname is used to denote a QName. QName values are composed of an uri, a local-name and an optional prefix. Two qnames are considered equal if they have the same uri and local-name, regardless of their prefix values. In cases where prefixes are not relevant, such as in the grammar notation, they are not specified by this document.

Terminal symbols that are qualified with a qname permit the use of a wildcard symbol (*) in place of or as part of a qname. The forms of terminal symbols involving qname wildcards used in grammars and their definitions are described in the table below.

Several prefixes are used throughout this document to designate certain namespaces. The bindings shown below are assumed, however, any prefixes can be used in practice if they are properly bound to the namespaces.

In describing the layout of an EXI format construct, a pair of square brackets [ ] are used to surround the name of a field to denote that the occurrence of the field is optional in the structure of the part or component that contains the field.

In arithmetic expressions, the notation ⌈x⌉ where x represents a real number denotes the ceiling of x, that is, the smallest integer greater than or equal to x.

When it is stated that strings are sorted in lexicographical order, it is done so character by character, and the order among characters is determined by comparing their Unicode code points.

Unless stated otherwise, when this specification indicates one type is derived from another type, it means the type is derived by extension or restriction, not by union or list. Similarly, when this specification uses the term type hierarchy, it is referring to the hierarchy of types derived from one another by extension or restriction

An EXI header MAY start with an EXI Cookie, which is a four byte field that serves to indicate that the stream of which it is a part is an EXI stream. The four byte field consists of four characters " $ " , " E ", " X " and " I " in that order, each represented as an ASCII octet, as follows.

This four byte sequence is particular to EXI and specific enough to distinguish EXI streams from a broad range of data types currently used on the Web. While the EXI cookie is optional, its use is RECOMMENDED in the EXI header when the EXI stream is exchanged in a context where a longer, more specific content-based datatype identifier is desired than that provided by the Distinguishing Bits, whose role is more narrowly focused on distinguishing EXI streams from XML documents.

The second part in the EXI header is the Distinguishing Bits, which is a two bit field of which the first bit contains the value 1 and the second bit contains the value 0, as follows.

Unlike the optional EXI cookie that MAY occur to precede this field, the presence of Distinguishing Bits is REQUIRED in the EXI header. It is used to distinguish EXI streams from text XML documents in the absence of an EXI cookie. This two bit sequence is the minimum that suffices to distinguish EXI streams from XML documents since it is the minimum length bit pattern that cannot occur as the first two bits of a well-formed XML document represented in any one of the conventional character encodings, such as UTF-8, UTF-16, UTF-32, UCS-2, UCS-4, EBCDIC, ISO 8859, Shift-JIS and EUC, according to XML   . Therefore, XML Processors that do not support EXI are expected to reject an EXI stream as early as they read and process the first byte from the stream.

Systems that use EXI streams as well as XML documents can reliably look at the Distinguishing Bits to determine whether to interpret a particular stream as XML or EXI.

The fourth part in the EXI header is the EXI Format Version, which identifies the version of the EXI format being used. EXI format version numbers are integers. Each version of the EXI Format Specification specifies the corresponding EXI format version number to be used by conforming implementations. The EXI format version number that corresponds with this version of the EXI format specification is 1 (one).

The first bit of the version field indicates whether the version is a preview or final version of the EXI format. A value of 0 indicates this is a final version and a value of 1 indicates this is a preview version. Final versions correspond to final, approved versions of the EXI format specification. An EXI processor that implements a final version of the EXI format specification is REQUIRED to process EXI streams that have a version field with its first bit set to 0 followed by a version number that corresponds to the version of the EXI specification the processor implements. The behavior of an EXI processor on an EXI stream with its first bit set to 0 followed by a version not corresponding to a version implemented by the processor is not constrained by this specification. For example, the EXI processor MAY reject such a stream outright or it MAY attempt to process the EXI body. Preview versions of the EXI format are useful for gaining implementation and deployment experience prior to finalizing a particular version of the EXI format. While preview versions may match drafts of this specification, they are not governed by this specification and the behaviour of EXI processors encountering preview versions of the EXI format is implementation dependent. Implementers are free to coordinate to achieve interoperability between different preview versions of the EXI format.

Following the first bit of the version is a sequence of one or more 4-bit unsigned integers representing the version number. The version number is determined by summing this sequence of 4-bit unsigned values and adding 1 (one). The sequence is terminated by any 4-bit unsigned integer with a value in the range 0-14. As such, the first 15 version numbers are represented by 4 bits, the next 15 are represented by 8 bits, etc.

Given an EXI stream with its stream cursor positioned just past the first bit of the EXI format version field, the EXI format version number can be computed by going through the following steps with version number initially set to 1.

The following are example EXI format version numbers.

EXI processors conforming with the final version of this specification MUST use the 5-bit value 0 0000 as the version number.

The fifth part of the EXI header is the EXI Options, which provides a way to specify the options used to encode the body of the EXI stream. The EXI Options are represented as an EXI Options document, which is an XML document encoded using the EXI format described in this specification. This results in a very compact header format that can be read and written with very little additional software.

The presence of EXI Options in its entirety is optional in EXI header, and it is predicated on the value of the presence bit that follows the Distinguishing Bits. When EXI Options are present in the header, an EXI Processor MUST observe the specified options to process the EXI stream that follows. Otherwise, an EXI Processor may obtain the EXI options using another mechanism. There are no fallback option values provided by this specification for use in the absence of the whole EXI Options part.

EXI processors MAY provide external means for applications or users to specify EXI Options when the EXI Options document is absent. Such EXI processors are typically used in controlled systems where the knowledge about the effective EXI Options is shared prior to the exchange of EXI streams . The mechanisms to communicate out-of-band EXI Options and their representation are implementation dependent.

The following table describes the EXI options that may be specified in the EXI Options document.

Appendix provides an XML Schema describing the EXI Options document. This schema is designed to produce smaller headers for option combinations used when compactness is critical.

The EXI Options document is represented as an EXI body informed by the above mentioned schema using the default options specified by the following XML document. An EXI Options document consists only of an EXI body, and MUST NOT start with an EXI header.

Note that this specification does not require EXI processors to read and process the schema prescribed for EXI options document (), in order to process EXI options documents. EXI processors MUST use the schema-informed grammars that stem from the schema in processing EXI options documents, beyond which there is no requirement as to the use of the schema, and implementations are free to use any methods to retrieve the instructions that observe the grammars for processing EXI options documents. Section describes the system to derive schema-informed grammars from XML Schemas.

Below is a brief description of each EXI option.

The alignment option is used to control the alignment of event codes and content items. The value is one of bit-packed, byte-alignment or pre-compression, of which bit-packed is the default value assumed when the "alignment" element is absent in the EXI Options document. The option values byte-alignment and pre-compression are effected when "byte" and "pre-compress" elements are present in the EXI Options document, respectively. When the value of compression option is set to true, alignment of the EXI Body is governed by the rules specified in instead of the alignment option value. The "alignment" element MUST NOT appear in an EXI options document when the "compression" element is present.

The alignment option value bit-packed indicates that the event codes and associated content are packed in bits without any padding in-between.

The alignment option value byte-alignment indicates that the event codes and associated content are aligned on byte boundaries. While byte-alignment generally results in EXI streams of larger sizes compared with their bit-packed equivalents, byte-alignment may provide a help in some use cases that involve frequent copying of large arrays of scalar data directly out of the stream. It can also make it possible to work with data in-place and can make it easier to debug encoded data by allowing items on aligned boundaries to be easily located in the stream.

The alignment option value pre-compression indicates that all steps involved in compression (see section ) are to be done with the exception of the final step of applying the DEFLATE algorithm. The primary use case of pre-compression is to avoid a duplicate compression step when compression capability is built into the transport protocol. In this case, pre-compression just prepares the stream for later compression.

The compression option is a Boolean used to increase compactness using additional computational resources. The default value "false" is assumed when the "compression" element is absent in the EXI Options document whereas its presence denotes the value "true". When set to true, the event codes and associated content are compressed according to regardless of the alignment option value. As mentioned above, the "compression" element MUST NOT appear in an EXI options document when the "alignment" element is present.

The strict option is a Boolean used to increase compactness by using a strict interpretation of the schemas and omitting preservation of certain items, such as comments, processing instructions and namespace prefixes. The default value "false" is assumed when the "strict" element is absent in the EXI Options document whereas its presence denotes the value "true". When set to true, those productions that have NS, CM, PI, ER, and SC terminal symbols are omitted from the EXI grammars, and schema-informed element and type grammars are restricted to only permit items declared in the schemas. A note in section describes some additional restrictions consequential of the use of this option. The "strict" element MUST NOT appear in an EXI options document when one of "dtd", "prefixes", "comments", "pis" or "selfContained" element is present in the same options document.

The fragment option is a Boolean that indicates whether the EXI body is an EXI document or an EXI fragment. When set to true, the EXI body is an EXI fragment. Otherwise, the EXI body is an EXI document. The default value "false" is assumed when the "fragment" element is absent in the EXI Options document whereas its presence denotes the value "true".

The preserve option is a set of Booleans that can be set independently to each enable or disable a share of the format's capacity determining whether or how certain information items can be preserved in the EXI stream. Section describes the set of information items affected by the preserve option. The presence of "dtd", "prefixes", "lexicalValues", "comments" and "pis" in the EXI Options document each turns on fidelity options Preserve.comments, Preserve.pis, Preserve.dtd, Preserve.prefixes and Preserve.lexicalValues whereas the absence denotes turning each off. The elements "dtd", "prefixes", "comments" and "pis" MUST NOT appear in an EXI options document when the "strict" element is present in the same options document. The element "lexicalValues", on the other hand, is permitted to occur in the presence of "strict" element.

The selfContained option is a Boolean used to enable the use of self-contained elements in the EXI stream. Self-contained elements may be read independently from the rest of the EXI body, allowing them to be indexed for random access. The "selfContained" element MUST NOT appear in an EXI options document when one of "compression", "pre-compression" or "strict" elements are present in the same options document. The default value "false" is assumed when the "selfContained" element is absent from the EXI Options document whereas its presence denotes the value "true".

The schemaId option may be used to identify the schema information used for processing the EXI body. When the "schemaId" element in the EXI options document contains the xsi:nil attribute with its value set to true, no schema information is used for processing the EXI body (i.e. a schema-less EXI stream). When the value of the "schemaId" element is empty, no user defined schema information is used for processing the EXI body; however, the built-in XML schema types are available for use in the EXI body. When the schemaId option is absent (i.e., undefined), no statement is made about the schema information used to encode the EXI body and this information MUST be communicated out of band. This specification does not dictate the syntax or semantics of other values specified in this field. An example schemaId scheme is the use of URI that is apt for globally identifying schema resources on the Web. The parties involved in the exchange are free to agree on the scheme of schemaId field that is appropriate for their use to uniquely identify the schema information.

The datatypeRepresentationMap option specifies an alternate set of datatype representations for typed values in the EXI body as described in . When there are no "datatypeRepresentationMap" elements in the EXI Options document, no Datatype Representation Map is used for processing the EXI body. This option does not take effect when the value of the Preserve.lexicalValues fidelity option is true (see ), or when the EXI stream is a schema-less EXI stream.

The blockSize option specifies the block size used for EXI compression. When the "blockSize" element is absent in the EXI Options document, the default blocksize of 1,000,000 is used. The default blockSize is intentionally large but can be reduced for processing large documents on devices with limited memory.

The valueMaxLength option specifies the maximum length of value content items to be considered for addition to the string table. The default value "unbounded" is assumed when the "valueMaxLength" element is absent in the EXI Options document.

The valuePartitionCapacity option specifies the maximum number of value content items in the string table at any given time. The default value "unbounded" is assumed when the "valuePartitionCapacity" element is absent in the EXI Options document. Section specifies the behavior of the string table when this capacity is reached.

The user defined meta-data conveys auxiliary information that applications may use to facilitate interpretation of the EXI stream. The user defined meta-data MUST NOT be interpreted in a way that alters or extends the EXI data format defined in this specification. User defined meta-data may be added to an EXI Options document just prior to the alignment option.

The structure of an EXI stream is described by the EXI grammars, which are formally specified in section . Each grammar defines which events are permitted to occur at any given point in the EXI stream and provides a pre-assigned event code for each one.

For example, the grammar productions below describe the events that can occur in a schema-informed EXI stream after the Start-Document (SD) event provided there are four global elements defined in the schema and assign an event code for each one. See for the process used for generating the grammar productions below from the schema.

At the point in an EXI stream where the above grammar productions are in effect, the event code of Start Element "A" (i.e. SE("A")) is 0. The event code of a DOCTYPE (DT) event at this point in the stream is 5.0, and so on.

Each event code is represented by a sequence of 1 to 3 parts that uniquely identify an event. Event code parts are encoded in order starting with the first part followed by subsequent parts.

The i-th part of an event code is encoded as an n-bit unsigned integer (), where n is ⌈ log ₂ m ⌉ and m is the number of distinct values used as the i-th part of its own and all its sibling event codes in the current grammar. Two event codes are siblings at the i-th part if and only if they share the same values in all preceding parts. All event codes are siblings at the first part.

If there is only one distinct value for a given part, the part is omitted (i.e., encoded in log ₂ 1 = 0 bits = 0 bytes).

For example, the eight event codes shown in the DocContent grammar above have values ranging from 0 to 5 for the first part. Six distinct values are needed to identify the first part of these event codes. Therefore, the first part can be encoded as an n-bit unsigned integer where n = ⌈ log ₂ 6 ⌉ = 3. In the same fashion, the second and third part (if present) are represented as n-bit unsigned integers where n is ⌈ log ₂ 2 ⌉ = 1  and ⌈ log ₂ 2 ⌉ = 1  respectively.

When the value of the compression option is false and bit-packed alignment is used, n-bit unsigned integers are represented using n bits. The first table below illustrates how the event codes of each event matched by the DocContent grammar above are represented in this case.

When the value of compression option is true, or either byte-alignment or pre-compression alignment option is used, n-bit unsigned integers are represented using the minimum number of bytes required to store n bits. The second table below illustrates how the event codes of each event matched by the DocContent grammar above are represented in this case.

Some XML applications do not require the entire XML feature set and would prefer to eliminate the overhead associated with unused features. For example, the SOAP 1.2 specification prohibits the use of XML processing instructions. In addition, there are many data-exchange use cases that do not require XML comments or DTDs.

The preserve option in EXI Options comprises a set of fidelity options, each of which independently enables or disables the format's capacity for the preservation (or preservation level) of a certain type of information item. Applications can use the preserve option to specify the set of fidelity options they require. As specified in section , EXI processors MUST use these fidelity options to prune productions that match the associated events from the grammars, improving compactness and processing efficiency.

The table below lists the fidelity options supported by this version of the EXI specification and describes the effect setting these options has on the EXI stream.

When qualified names are used in the values of AT or CH events in an EXI Stream, the Preserve.prefixes fidelity option SHOULD be turned on to enable the preservation of the NS prefix declarations used by these values. Note, in particular among other cases, that this practice applies to the use of xsi:type attributes in EXI streams when Preserve.lexicalValues fidelity option is set to true.

See section for the definition of EXI event types and their associated content items.

The following sections describe the built-in EXI datatype representations used for representing event codes and content items in EXI streams. Unless otherwise stated, individual items in an EXI stream are packed into bytes most significant bit first.

When the Preserve.lexicalValues option is false, enumerated values are encoded as n-bit Unsigned Integers () where n = ⌈ log ₂ m ⌉ and m is the number of items in the enumerated type. The unsigned integer value assigned to each item corresponds to its ordinal position in the enumeration in schema-order starting with position zero (0). When there are more than one item that represent the same value in the enumeration, such value can be represented using the ordinal position of any items that represent the value.

Exceptions are for schema types derived from others by union and their subtypes, QName or Notation and types derived therefrom by restriction. The values of such types are processed by their respective built-in EXI datatype representations instead of being represented as enumerations.

EXI uses a string table to assign "compact identifiers" to some string values. Occurrences of string values found in the string table are represented using the associated compact identifier rather than encoding the entire "string literal". The string table is initially pre-populated with string values that are likely to occur in certain contexts and is dynamically expanded to include additional string values encountered in the document. The following content items are encoded using a string table:

When a string value is found in the string table, the value is encoded using the compact identifier and no changes are made to the string table as a result. When a string value is not found in the string table, its string literal is encoded as a String without using a compact identifier, only after which the string table is augmented by including the string value with an assigned compact identifier unless the string value represents a value content item and fails to satisfy the criteria in effect by virtue of valuePartitionCapacity and valueMaxLength options .

The string table is divided into partitions and each partition is optimized for more frequent use of either compact identifiers or string literals depending on the purpose of the partition. Section describes how EXI string table is partitioned. Section describes how string values are encoded when the associated partition is optimized for more frequent use of compact identifiers. Section describes how string values are encoded when the associated partition is optimized for more frequent use of string literals.

The life cycle of a string table spans the processing of a single EXI stream. String tables are not represented in an EXI stream or exchanged between EXI processors. A string table cannot be reused across multiple EXI streams; therefore, EXI processors MUST use a string table that is equivalent to the one that would have been newly created and pre-populated with initial values for processing each EXI stream.

By default, each typed value in an EXI stream is represented using its default built-in EXI datatype representation (see ). However, EXI processors MAY provide the capability to specify alternate built-in EXI datatype representations or user-defined datatype representations for specific schema datatypes. This capability is called a Datatype Representation Map.

EXI processors that support Datatype Representation Maps MAY provide implementation specific means to define and install user-defined datatype representations. EXI processors MAY also provide implementation specific means for applications or users to specify alternate built-in EXI datatype representations or user-defined datatype representations for representing specific schema datatypes. As with the default EXI datatype representations, alternate datatype representations are used for the associated XML Schema types specified in the Datatype Representation Map and XML Schema datatypes derived from those datatypes. When there are built-in or user-defined datatype representations associated with more than one XML Schema datatype in the type hierarchy of a particular datatype, the closest ancestor with an associated datatype representation is used to determine the EXI datatype representation.

When an EXI processor encodes an EXI stream using a Datatype Representation Map and the EXI Options part of the header is present, the EXI options part MUST specify all alternate datatype representations used in the EXI stream. An EXI processor that attempts to decode an EXI stream that specifies a user-defined datatype representation in the EXI header that it does not recognize MAY report a warning, but this is not an error. However, when an EXI processor encounters a typed value that was encoded by a user-defined datatype representation that it does not support, it MUST report an error.

The EXI options header, when it appears in an EXI stream, MUST include a "datatypeRepresentationMap" element for each schema datatype of which the descendant datatypes derived by restriction as well as itself are not represented using the default built-in EXI datatype representation. The "datatypeRepresentationMap" element includes two child elements. The qname of the first child element identifies the schema datatype that is not represented using the default built-in EXI datatype representation and the qname of the second child element identifies the alternate built-in EXI datatype representation or user-defined datatype representation used to represent that type. Built-in EXI datatype representations are identified by the type identifiers in .

For example, the following "datatypeRepresentationMap" element indicates all values of type xsd:decimal are represented using the built-in exi:string datatype representation. In addition, all datatypes derived from xsd:decimal by restriction that do not have a closer ancestor in the type hierarchy with an associated datatype representation are represented using exi:string.

It is the responsibility of an EXI processor to interface with a particular implementation of built-in EXI datatype representations or user-defined datatype representations properly. In the example above, an EXI processor may need to provide a string value of the data being processed that is typed as xsd:decimal in order to interface with an implementation of built-in String datatype representation. In such a case, some EXI processors may have started with a decimal value and such processors may well translate the value into a string before passing the data to the implementation of built-in String datatype representation while other EXI processors may already have a string value of the data so that it can pass the value directly to the implementation of built-in String datatype representation without any translation.

As another example, the following "datatypeRepresentationMap" element indicates all values of the used-defined simple type geo:geometricSurface and the datatypes derived from it by restriction are represented using the user-defined datatype representation geo:geometricInterpolator:

Each production rule in the EXI grammar includes an event code value that approximates the likelihood the associated production rule will be matched over the other productions with the same left-hand-side non-terminal symbol. Ultimately, the event codes determine the value(s) by which each non-terminal symbol will be represented in the EXI stream.

To understand how a given event code approximates the likelihood a given production will match, it is useful to visualize the event codes for a set of production rules that have the same non-terminal symbol on the left-hand side as a tree. For example, the following set of productions:

represents a set of information items that might occur as element content after the start tag. Using the production event codes, we can visualize this set of productions as follows:

As discussed in section , applications MAY provide a set of fidelity options to specify the XML features they require. EXI processors MUST use these fidelity options to prune the productions of which the terminal symbols represent the events that are not required from the grammars, improving compactness and processing efficiency.

For example, the following set of productions represent the set of information items that might occur as element content after the start tag.

If an application sets the fidelity options Preserve.comments, Preserve.pis and Preserve.dtd to false, the productions matching comment (CM), processing instruction (PI) and entity reference (ER) events are pruned from the grammar, producing the following set of productions:

Removing these productions from the grammar tells EXI processors that comments and processing instructions will never occur in the EXI stream, which reduces the entropy of the stream allowing it to be encoded in fewer bits.

Each time a production is removed from a grammar, the event codes of the other productions with the same non-terminal symbol on the left-hand side MUST be adjusted to keep them contiguous if its removal has left the remaining productions with non-contiguous event codes.

This section describes the built-in XML grammars used by EXI when no schema information is available or when available schema information describes only portions of the EXI stream.

The built-in XML grammars are dynamic and continuously evolve to reflect knowledge learned while processing an EXI stream. New built-in element grammars are created to describe the content of newly encountered elements and new grammar productions are added to refine existing built-in grammars. Newly learned grammars and productions are used to more efficiently represent subsequent events in the EXI stream. All newly created built-in element grammars are global element grammars.

A global element grammar is a grammar describing the content of an element that has global scope (i.e. a global element). At the onset of processing an EXI stream, the set of global element grammars is the set of all schema-informed element grammars derived from element declarations that have a {scope} property of global. Each created while processing an EXI stream is added to the set of global element grammars. Each global element grammar has a unique qname.

A conformant EXI stream consists of a sequence of octets that follows the syntax of EXI stream that is defined in this document. EXI format provides a way to involve user-defined datatype representations in EXI streams processing, which is an extension point that, when used in conjunction with relevant datatype representations specifications external to this document, leads to the formulation of Extended EXI streams.

Conformance of extended EXI streams is relative to the syntax defined by the relevant user-defined datatype representations specifications. The definitions of user-defined datatype representations syntax are out of the scope of this document. An extended EXI stream is a conformant extended EXI stream if replacing value items represented using user-defined datatype representations with their intrinsic representations would make the stream a conformant EXI stream. An extended EXI stream described as an "EXI stream with regards to datatype representations S " where S is the set of datatype representations can be processed by an EXI stream decoder only if the processor has the shared knowledge about each one of the datatype representations in the set S.

The structural syntax of EXI streams and extended EXI streams is described by the abstract EXI grammar system defined in this document. Although this document specifies the normative way in which XML Schema schemas are mapped into the EXI grammar system to make schema-informed grammars, EXI allows the use of other schema languages to process EXI streams or extended EXI streams so far as there is a well known EXI grammar binding of the schema language and the binding preserves the semantics of the EXI grammar system. EXI streams or extended EXI streams generated using schemas of such schema language are still conformant. The definitions of grammar bindings for schema languages other than XML Schema are out of the scope of this document, and each schema language community is encouraged to define its own binding in order to make it possible to harness the utmost efficiency out of EXI when schemas of the language are available.

The conformance of EXI Processors is defined separately for each of the two processor roles, EXI stream encoders and EXI stream decoders; the conformance of the former is described in terms of the conformance of the EXI streams or extended EXI streams that they produce, while that of the latter is based on the set of format features that EXI stream decoders are prepared for in the processing of conformant EXI streams or conformant extended EXI streams.

An EXI stream encoder is conformant if and only if it is capable of generating conformant EXI streams or conformant extended EXI streams given any input structured data it is made to work on. On the other hand, EXI stream decoders MUST support all format features described in this document as they are explained, except for the capability of handling Datatype Representation Map which is an optional feature. EXI stream decoders that do not implement Datatype Representation Map feature MUST report an error with a meaningful message upon encountering a "datatypeRepresentationMap" element while processing EXI options documents in EXI headers.

Except where required for interoperability with limited computing platforms (e.g, mobile and embedded devices), this specification avoids placing arbitrary limits on the magnitude of specific numeric values required for implementation. So, in theory it is possible for EXI grammars, event codes, strings, enumeration lists, etc. to be arbitrarily large. In practice, however, it is not the intent of this specification to require conforming implementations to adopt exotic or inefficient numeric representations for handling arbitrarily large EXI documents and grammars on specific platforms.