XSLT 2.0 and XQuery 1.0 Serialization

CR-xslt-xquery-serialization-20051103

W3C Candidate Recommendation

3 November 2005 http://www.w3.org/TR/2005/CR-xslt-xquery-serialization-20051103/ XML Recent revisions http://www.w3.org/TR/xslt-xquery-serialization/ http://www.w3.org/TR/2005/WD-xslt-xquery-serialization-20050915/ http://www.w3.org/TR/2005/WD-xslt-xquery-serialization-20050404/ http://www.w3.org/TR/2005/WD-xslt-xquery-serialization-20050211/ http://www.w3.org/TR/2004/WD-xslt-xquery-serialization-20041029/ http://www.w3.org/TR/2004/WD-xslt-xquery-serialization-20040723/ Scott Boag IBM scott_boag@us.ibm.com Michael Kay Saxonica http://www.saxonica.com Joanne Tong IBM joannet@ca.ibm.com Norman Walsh Sun Microsystems Norman.Walsh@Sun.COM Henry Zongaro IBM zongaro@ca.ibm.com

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

This is a Candidate Recommendation as described in the Process Document. This document is intended for review by W3C members and other interested parties. The publication of this document constitutes a call for implementations of this specification. This specification will remain a Candidate Recommendation until at least 2006-02-28.

This document has been jointly produced by the XML Query Working Group (WG) and the XSL Working Group, both of which are part of the XML Activity. Publication as a Candidate Recommendation does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

This draft includes corrections and changes based on public comments recorded in the W3C public Bugzilla repository (http://www.w3.org/Bugs/Public/) used for Last Call issues tracking. A list of substantive changes since the Last Call Working Draft of 04 April 2005 can be found in .

Comments on this document should be made in W3C's public Bugzilla system (instructions can be found at http://www.w3.org/XML/2005/04/qt-bugzilla). If access to that system is not feasible, you may send your comments to the W3C XSLT/XPath/XQuery mailing list, public-qt-comments@w3.org. It will be very helpful if you include the string [Ser] in the subject line of your comment, whether made in Bugzilla or in email. Each Bugzilla entry and email message should contain only one comment. Archives of the comments and responses are available at http://lists.w3.org/Archives/Public/public-qt-comments/.

The XML Query and XSL Working Groups plan to submit this specification for consideration as a W3C Proposed Recommendation as soon as both and have been submitted for consideration as W3C Proposed Recommendations.

The XML Query and XPath Test Suite is under development. Implementors are encouraged to run this test suite and report their results.

The patent policy for this document is the 5 February 2004 W3C Patent Policy. Patent disclosures relevant to this specification may be found on the XML Query Working Group's patent disclosure page and the XSL Working Group's patent disclosure page. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) with respect to this specification should disclose the information in accordance with section 6 of the W3C Patent Policy.

This document defines serialization of an instance of the data model as defined in into a sequence of octets. Serialization is designed to be a component that can be used by other specifications such as or .

English

See the CVS changelog.

Introduction

This document defines serialization of the W3C XQuery 1.0 and XPath 2.0 Data Model (XDM), which is the data model of at least , , and , and any other specifications that reference it.

Serialization is the process of converting an instance of the into a sequence of octets. Serialization is well-defined for most data model instances.

Terminology

In this specification, where they appear in upper case, the words "MUST", "MUST NOT", "SHOULD", "SHOULD NOT", "MAY", "REQUIRED", and "RECOMMENDED" are to be interpreted as described in .

As is indicated in , conformance criteria for serialization are determined by other specifications that refer to this specification. A serializer is software that implements some or all of the requirements of this specification in accordance with such conformance criteria. A serializer is not REQUIRED to directly provide a programming interface that permits a user to set serialization parameters or to provide an input sequence for serialization.

Certain aspects of serialization are described in this specification as implementation-defined or implementation-dependent.

Implementation-defined indicates an aspect that MAY differ between serializers, but whose actual behaviour MUST be specified either by another specification that sets conformance criteria for serialization (see ) or in documentation that accompanies the serializer.

Implementation-dependent indicates an aspect that MAY differ between serializers, and whose actual behaviour is not REQUIRED to be specified either by another specification that sets conformance criteria for serialization (see ) or in documentation that accompanies the serializer.

In some instances, the sequence that is input to serialization cannot be successfully converted into a sequence of octets given the set of serialization parameter () values specified. A serialization error is said to occur in such an instance. In some cases, a serializer is REQUIRED to signal such an error. What it means to signal a serialization error is determined by the relevant conformance criteria () to which the serializer conforms. In other cases, there is an implementation-defined choice between signaling a serialization error and performing a recovery action. Such a recovery action will allow a serializer to produce a sequence of octets that might not fully reflect the usual requirements of the parameter settings that are in effect.

Many terms used in this document are defined in the XPath specification or the Data Model specification . Particular attention is drawn to the following:

The term atomization is defined in . It is a process that takes as input a sequence of nodes and atomic values, and returns a sequence of atomic values, in which the nodes are replaced by their typed values as defined in .

The term Node is defined as part of . There are seven kinds of nodes in the data model: document, element, attribute, text, namespace, processing instruction, and comment.

The term sequence is defined in . A sequence is an ordered collection of zero or more items.

The term string value is defined in . Every node has a string value. For example, the string value of an element is the concatenation of the string values of all its descendant text nodes.

The term expanded QName is defined in . An expanded QName consists of an optional namespace URI and a local name. An expanded QName also retains its original namespace prefix (if any), to facilitate casting the expanded QName into a string.

An element or attribute that is in no namespace, or an expanded-QName whose namespace part is an empty sequence, is referred to as having a null namespace URI.

An element or attribute that does not have a null namespace URI, is referred to as having a non-null namespace URI.

Sequence Normalization

An instance of the data model that is input to the serialization process is a sequence. Prior to serializing a sequence using any of the output methods whose behavior is specified by this document (), the serializer MUST first compute a normalized sequence for serialization; it is the normalized sequence that is actually serialized. The purpose of sequence normalization is to create a sequence that can be serialized as a well-formed XML document or external general parsed entity, that also reflects the content of the input sequence to the extent possible. The result of the sequence normalization process is a result tree.

The normalized sequence for serialization is constructed by applying all of the following rules in order, with the initial sequence being input to the first step, and the sequence that results from any step being used as input to the subsequent step. For any implementation-defined output method, it is implementation-defined whether this sequence normalization process takes place.

For any implementation-defined output method, it is implementation-defined whether sequence normalization process takes place.

Where the process of converting the input sequence to a normalized sequence indicates that a value MUST be cast to xs:string, that operation is defined in of . The steps in computing the normalized sequence are:

If the sequence that is input to serialization is empty, create a sequence S₁ that consists of a zero-length string. Otherwise, copy each item in the sequence that is input to serialization to create the new sequence S₁.

For each item in S₁, if the item is atomic, obtain the lexical representation of the item by casting it to an xs:string and copy the string representation to the new sequence; otherwise, copy the item, which will be a node, to the new sequence. The new sequence is S₂.

For each subsequence of adjacent strings in S₂, copy a single string to the new sequence equal to the values of the strings in the subsequence concatenated in order, each separated by a single space. Copy all other items to the new sequence. The new sequence is S₃.

For each item in S₃, if the item is a string, create a text node in the new sequence whose string value is equal to the string; otherwise, copy the item to the new sequence. The new sequence is S₄.

For each item in S₄, if the item is a document node, copy its children to the new sequence; otherwise, copy the item to the new sequence. The new sequence is S₅.

For each subsequence of adjacent text nodes in S₅, copy a single text node to the new sequence equal to the values of the text nodes in the subsequence concatenated in order. Any text nodes with values of zero length are dropped. Copy all other items to the new sequence. The new sequence is S₆.

It is a serialization error if an item in S₆ is an attribute node or a namespace node. Otherwise, construct a new sequence, S₇, that consists of a single document node and copy all the items in the sequence, which are all nodes, as children of that document node.

S₇ is the normalized sequence.

The result tree rooted at the document node that is created by the final step of this sequence normalization process is the instance of the data model to which the rules of the appropriate output method are applied. If the sequence normalization process results in a serialization error, the serializer MUST signal the error.

The sequence normalization process for a sequence $seq is equivalent to constructing a document node using the XSLT instruction:

<xsl:document> <xsl:copy-of select="$seq"/> </xsl:document>

or the XQuery expression:

document { for $s in $seq return if ($s instance of document-node()) then $s/child::node() else $s }

This process results in a serialization error if sequences contain parentless attribute and/or namespace nodes.

Serialization Parameters

There are a number of parameters that influence how serialization is performed. Host languages MAY allow users to specify any or all of these parameters, but they are not REQUIRED to be able to do so. However, the host language specification MUST specify how the value of all applicable parameters is to be determined.

It is a serialization error if a parameter value is invalid for the given parameter. It is the responsibility of the host language to specify how invalid values should be handled at the level of that language.

The following serialization parameters are defined:

Serialization parameter name	Permitted values for parameter
`byte-order-mark`	One of the enumerated values `yes` or `no`. This parameter indicates whether the serialized sequence of octets is to be preceded by a Byte Order Mark. (See Section 5.1 of .) The actual octet order used is implementation-dependent. If the encoding defines no Byte Order Mark, or if the Byte Order Mark is prohibited for the specific Unicode encoding or implementation environment, then this parameter is ignored.
`cdata-section-elements`	A list of expanded QNames, possibly empty.
`doctype-public`	A string of Unicode characters. This parameter may be absent.
`doctype-system`	A string of Unicode characters. This parameter may be absent.
`encoding`	A string of Unicode characters in the range #x21 to #x7E (that is, printable ASCII characters); the value SHOULD be a charset registered with the Internet Assigned Numbers Authority , or begin with the characters `x-` or `X-`.
`escape-uri-attributes`	One of the enumerated values `yes` or `no`.
`include-content-type`	One of the enumerated values `yes` or `no`.
`indent`	One of the enumerated values `yes` or `no`.
`media-type`	A string of Unicode characters specifying the media type (MIME content type) ; the charset parameter of the media type MUST NOT be specified explicitly in the value of the `media-type` parameter. If the destination of the serialized output is annotated with a media type, this parameter MAY be used to provide such an annotation. For example, it MAY be used to set the media type in an HTTP header.
`method`	An expanded QName with a null namespace URI, and the local part of the name equal to one of `xml`, `xhtml`, `html` or `text`, or having a non-null namespace URI. If the namespace URI is non-null, the parameter specifies an implementation-defined output method.
`normalization-form`	One of the enumerated values `NFC`, `NFD`, `NFKC`, `NFKD`, `fully-normalized`, `none` or an implementation-defined value.
`omit-xml-declaration`	One of the enumerated values `yes` or `no`.
`standalone`	One of the enumerated values `yes`, `no` or `omit`.
`undeclare-prefixes`	One of the enumerated values `yes` or `no`.
`use-character-maps`	A list of pairs, possibly empty, with each pair consisting of a single Unicode character and a string of Unicode characters.
`version`	A string of Unicode characters.

The octet order of the serialized result sequence of octects is implementation-dependent.

The value of the method parameter is an expanded QName. If the value has a null namespace URI, then the local name identifies a method specified in this document and MUST be one of xml, html, xhtml, or text; in this case, the output method specified MUST be used for serializing. If the namespace URI is non-null, then it identifies an implementation-defined output method; the behavior in this case is not specified by this document.

If the namespace URI is non-null for the method serialization parameter, then the parameter specifies an implementation-defined output method.

In those cases where they have no important effect on the content of the serialized result, details of the output methods defined by this specification are left unspecified and are regarded as implementation-dependent. Whether a serializer uses apostrophes or quotation marks to delimit attribute values in the XML output method is an example of such a detail.

The detailed semantics of each parameter will be described separately for each output method for which it is applicable. If the semantics of a parameter are not described for an output method, then it is not applicable to that output method.

Implementations MAY define additional serialization parameters, and MAY allow users to do so. For this purpose, the name of a serialization parameter is considered to be a QName; the parameters listed above are QNames in no namespace, while any additional serialization parameters must have names that are namespace-qualified. If the serialization method is one of the four methods xml, html, xhtml, or text, then the additional serialization parameters MAY affect the output of the serializer to the extent (but only to the extent) that this specification leaves the output implementation-defined or implementation-dependent. For example, such parameters might control whether namespace declarations on an element are written before or after the attributes of the element, or they might define the number of space or tab characters to be inserted when the indent parameter is set to yes; but they could not instruct the serializer to suppress the error that occurs when the HTML output method encounters illegal characters (see error ).

The effect of additional serialization parameters on the output of the serializer, where the name of such a parameter must be namespace-qualified, is implementation-defined or implementation-dependent. The extent of this effect on the output must not override the provisions of this specification.

Phases of Serialization

Following the sequence normalization process described in , serialization can be regarded as involving three phases of processing.

For an implementation-defined output method, any of these phases MAY be skipped or MAY be performed in a different order than is specified here. For the output methods defined in this specification, these phases are carried out sequentially as follows:

Markup generation produces the character representation of those parts of the serialized result that describe the structure of the normalized sequence. In the cases of the XML, HTML and XHTML output methods, this phase produces the character representations of the following:

the document type declaration;

start tags and end tags (except for attribute values, whose representation is produced by the character expansion phase);

processing instructions; and

comments.

In the cases of the XML and XHTML output methods, this phase also produces the following:

the XML or text declaration; and

empty element tags (except for the attribute values);

In the case of the text output method, this phase has no effect.

Character expansion is concerned with the representation of characters appearing in text and attribute nodes in the normalized sequence. The substitution processes that apply are listed below, in priority order: a character that is handled by one process in this list will be unaffected by processes appearing later in the list, except that a character affected by Unicode Normalization MAY be affected by creation of CDATA sections and by character escaping:

URI escaping, as determined by the escape-uri-attributes parameter that is applicable to HTML and XHTML output methods. URI escaping is a process where the content of URI attribute values are first normalized to NFC using the method defined in of , then escaped using the method defined in of . The values of attributes listed in are URI attribute values. Namespace declaration attributes and attributes whose type annotation is xs:anyURI are excluded from this list.

Character mapping, as determined by the use-character-maps parameter. Text nodes that are children of elements specified by the cdata-section-elements parameter are not affected by this step.

Unicode Normalization, if requested by the normalization-form parameter. Unicode Normalization is the process of removing alternate representations of equivalent sequences from textual data, to convert the data into a form that can be binary-compared for equivalence, as specified in . For specific recommendations for character normalization on the World Wide Web, see .

The meanings associated with the possible values of the normalization-form parameter are as follows:

NFC specifies the serialized result will be in Normalization Form C, using the rules specified in .

NFD specifies the serialized result will be in Normalization Form D, as specified in .

NFKC specifies the serialized result will be in Normalization Form KC, as specified in .

NFKD specifies the serialized result will be in Normalization Form KD, as specified in .

fully-normalized specifies the serialized result will be in fully normalized text, as specified in .

none specifies that no Unicode Normalization will be applied.

An implementation-defined value has an implementation-defined effect.

If the value of the normalization-form form parameter is not NFC, NFD, NFKC, NFKD, fully-normalized, or none then the meaning of the value and its effect is implementation-defined.

Creation of CDATA sections, as determined by the cdata-section-elements parameter. Note that this is also affected by the encoding parameter, in that characters not present in the selected encoding cannot be represented in a CDATA section.

Escaping according to XML or HTML rules of special characters that cannot be represented in the selected encoding, for example, replacing < with <.

Encoding, as controlled by the encoding parameter, converts the character stream produced by the previous phases into an octet stream.

Serialization is only defined in terms of encoding the result as a stream of octets. However, a serializer may provide an option that allows the encoding phase to be skipped, so that the result of serialization is a stream of Unicode characters. The effect of any such option is implementation-defined, and a serializer is not required to support such an option.

The effect of providing an option that allows the encoding phase to be skipped, so that the result of serialization is a stream of Unicode characters, is implementation-defined. The serializer is not required to support such an option.

XML Output Method

The XML output method serializes the normalized sequence as an XML entity that MUST satisfy the rules for either a well-formed XML document entity or a well-formed XML external general parsed entity, or both. A serialization error results if the serializer is unable to satisfy those rules, except for content modified by the character expansion phase of serialization, as described in , which could result in the serialized output being not well-formed but will not result in a serialization error. If a serialization error results, the serializer MUST signal the error.

If the document node of the normalized sequence has a single element node child and no text node children, then the serialized output is a well-formed XML document entity, and the serialized output MUST conform to the appropriate version of the XML Namespaces Recommendation or . If the normalized sequence does not take this form, then the serialized output is a well-formed XML external general parsed entity, which, when referenced within a trivial XML document wrapper like this:

<?xml version="version"?> <!DOCTYPE doc [ <!ENTITY e SYSTEM "entity-URI"> ]> <doc>&e;</doc>

where entity-URI is a URI for the entity, and the value of the version pseudo-attribute is the value of the version parameter, produces a document which MUST itself be a well-formed XML document conforming to the corresponding version of the XML Namespaces Recommendation or .

A reconstructed tree may be constructed by parsing the XML document and converting it into an instance of the data model as specified in . The result of serialization MUST be such that the reconstructed tree is the same as the result tree except for the following permitted differences:

If the document was produced by adding a document wrapper, as described above, then it will contain an extra doc element as the document element.

The order of attribute and namespace nodes in the two trees MAY be different.

The following properties of corresponding nodes in the two trees MAY be different:

the base-uri property of document nodes and element nodes;

the document-uri and unparsed-entities properties of document nodes;

the type-name and typed-value properties of element and attribute nodes;

the nilled property of element nodes;

the content property of text nodes, due to the effect of the indent and use-character-maps parameters.

The reconstructed tree MAY contain additional attributes and text nodes resulting from the expansion of default and fixed values in its DTD or schema.

The type annotations of the nodes in the two trees MAY be different. Type annotations in a result tree are discarded when the tree is serialized. Any new type annotations obtained by parsing the document will depend on whether the serialized XML document is assessed against a schema, and this MAY result in type annotations that are different from those in the original result tree.

In order to influence the type annotations in the instance of the data model that would result from processing a serialized XML document, the author of the XSLT stylesheet, XQuery expression or other process might wish to create the instance of the data model that is input to the serialization process so that it makes use of mechanisms provided by , such as xsi:type and xsi:schemaLocation attributes. The serialization process will not automatically create such attributes in the serialized document if those attributes were not part of the result tree that is to be serialized.

Similarly, it is possible that an element node in the instance of the data model that is to be serialized has the nilled property with the value true, but no xsi:nil attribute. The serialization process will not create such an attribute in the serialized document simply to reflect the value of the property. The value of the nilled property has no direct effect on the serialized result.

Additional namespace nodes MAY be present in the reconstructed tree if the serialization process did not undeclare one or more namespaces, as described in , and the starting instance of the data model contained an element node with a namespace node that declared some prefix, but a child element of that node did not have any namespace node that declared the same prefix.

The result tree MAY contain namespace nodes that are not present in the reconstructed tree, as the process of creating an instance of the data model MAY ignore namespace declarations in some circumstances. See and of for additional information.

If the indent parameter has the value yes,

additional text nodes consisting of whitespace characters MAY be present in the reconstructed tree; and

text nodes in the result tree that contained only whitespace characters MAY correspond to text nodes in the reconstructed tree that contain additional whitespace characters that were not present in the result tree

See for more information on the indent parameter.

Additional nodes MAY be present in the reconstructed tree due to the effect of character mapping in the character expansion phase, and the values of attribute nodes and text nodes in the reconstructed tree MAY be different from those in the result tree, due to the effects of URI expansion, character mapping and Unicode Normalization in the character expansion phase of serialization.

The use-character-maps parameter can cause arbitrary characters to be inserted into the serialized XML document in an unescaped form, including characters that would be considered to be part of XML markup. Such characters could result in arbitrary new element nodes, attribute nodes, and so on, in the reconstructed tree that results from processing the serialized XML document.

A consequence of this rule is that certain characters MUST be output as character references, to ensure that they survive the round trip through serialization and parsing. Specifically, CR, NEL and LINE SEPARATOR characters in text nodes MUST be output respectively as "", "", and " ", or their equivalents; while CR, NL, TAB, NEL and LINE SEPARATOR characters in attribute nodes MUST be output respectively as "", "
", "	", "", and " ", or their equivalents. In addition, the non-whitespace control characters #x1 through #x1F and #x7F through #x9F in text nodes and attribute nodes MUST be output as character references.

For example, an attribute with the value "x" followed by "y" separated by a newline will result in the output "x
y" (or with any equivalent character reference). The XML output cannot be "x" followed by a literal newline followed by a "y" because after parsing, the attribute value would be "x y" as a consequence of the XML attribute normalization rules.

XML 1.0 did not permit an XML processor to normalize NEL or LINE SEPARATOR characters to a LINE FEED character. However, if a document entity that specifies version 1.1 invokes an external general parsed entity with no text declaration or a text declaration that specifies version 1.0, the external parsed entity is processed according to the rules of XML 1.1. For this reason, NEL and LINE SEPARATOR characters in text and attribute nodes must always be escaped using character references, regardless of the value of the version parameter.

XML 1.0 permitted control characters in the range #x7F through #x9F to appear as literal characters in an XML document, but XML 1.1 requires such characters, other than NEL, to be escaped as character references. An external general parsed entity with no text declaration or a text declaration that specifies a version pseudo-attribute with value 1.0 that is invoked by an XML 1.1 document entity MUST follow the rules of XML 1.1. Therefore, the non-whitespace control characters in the ranges #x1 through #x1F and #x7F through #x9F, other than NEL, MUST always be escaped, regardless of the value of the version parameter.

It is a serialization error to specify the doctype-system parameter, or to specify the standalone parameter with a value other than omit, if the instance of the data model contains text nodes or multiple element nodes as children of the root node. The serializer MUST either signal the error, or recover by ignoring the request to output a document type declaration or standalone parameter.

The result of serialization using the XML output method is not guaranteed to be well-formed XML if character maps have been specified (see ).

The Influence of Serialization Parameters upon the XML Output Method XML Output Method: the version Parameter

The version parameter specifies the version of XML and the version of Namespaces in XML to be used for outputting the instance of the data model. The version output in the XML declaration (if an XML declaration is not omitted) MUST correspond to the version of XML that the serializer used for outputting the instance of the data model. The value of the version parameter MUST match the production of the XML Recommendation or .

If the serialized result would contain an that contains a character that is not permitted by the version of Namespaces in XML specified by the version parameter, a serialization error results. The serializer MUST signal the error.

If the serialized result would contain a character that is not permitted by the version of XML specified by the version parameter, a serialization error results. The serializer MUST signal the error.

For example, if the version parameter has the value 1.0, and the instance of the data model contains a non-whitespace control character in the range #x1 to #x1F, a serialization error results. If the version parameter has the value 1.1 and a comment node in the instance of the data model contains a non-whitespace control character in the range #x1 to #x1F or a control character other than NEL in the range #x7F to #x9F, a serialization error results.

XML Output Method: the encoding Parameter

The encoding parameter specifies the encoding to be used for outputting the instance of the data model. Serializers are REQUIRED to support values of UTF-8 and UTF-16. A serialization error occurs if an output encoding other than UTF-8 or UTF-16 is requested and the serializer does not support that encoding. The serializer MUST signal the error, or recover by using UTF-8 or UTF-16 instead. The serializer MUST NOT use an encoding whose name does not match the production of the XML Recommendation .

When outputting a newline character in the instance of the data model, the serializer is free to represent it using any character sequence that will be normalized to a newline character by an XML parser, unless a specific mapping for the newline character is provided in a character map (see ).

When outputting any other character that is defined in the selected encoding, the character MUST be output using the correct representation of that character in the selected encoding.

It is possible that the instance of the data model will contain a character that cannot be represented in the encoding that the serializer is using for output. In this case, if the character occurs in a context where XML recognizes character references (that is, in the value of an attribute node or text node), then the character MUST be output as a character reference. A serialization error occurs if such a character appears in a context where character references are not allowed (for example, if the character occurs in the name of an element). The serializer MUST signal the error.

For example, if a text node contains the character LATIN SMALL LETTER E WITH ACUTE (#xE9), and the value of the encoding parameter is US-ASCII, the character MUST be serialized as a character reference. If a comment node contains the same character, a serialization error results.

XML Output Method: the indent Parameter

If the indent parameter has the value yes, then the XML output method MAY output whitespace in addition to the whitespace in the instance of the data model in order to indent the result so that a person will find it easier to read; if the indent parameter has the value no, it MUST NOT output any additional whitespace. If the XML output method does output additional whitespace, it MUST use an algorithm to output additional whitespace that satisfies all of the following constraints:

Whitespace characters MUST NOT be added adjacent to a text node that contains non-whitespace characters.

Whitespace characters MUST NOT be added other than adjacent to an element node, that is, immediately before a start tag or immediately after an end tag.

Whitespace characters MUST NOT be inserted in a part of the result document that is controlled by an xml:space attribute with value preserve. (See for more information about the xml:space attribute.)

Whitespace characters SHOULD NOT be added in places where the characters would constitute significant whitespace, for example, in the content of an element whose content model is known to be mixed.

In any location where the above rules allow the addition of whitespace characters, existing whitespace characters MAY also be removed or replaced. For example, a tab MAY be inserted as a replacement for existing spaces.

The effect of these rules is to ensure that whitespace is only added in places where (a) XSLT's <xsl:strip-space> declaration could cause it to be removed, and (b) it does not affect the string value of any element node with simple content. It is usually not safe to indent document types that include elements with mixed content.

The whitespace added may possibly be based on whitespace stripped from either the source document or the stylesheet (in the case of XSLT), or guided by other means that might depend on the host language, in the case of an instance of the data model created using some other process.

XML Output Method: the cdata-section-elements Parameter

The cdata-section-elements parameter contains a list of expanded QNames. If the expanded QName of the parent of a text node is a member of the list, then the text node MUST be output as a CDATA section, except in those circumstances described below.

If the text node contains the sequence of characters ]]>, then the currently open CDATA section MUST be closed following the ]] and a new CDATA section opened before the >.

If the text node contains characters that are not representable in the character encoding being used to output the instance of the data model, then the currently open CDATA section MUST be closed before such characters, the characters MUST be output using character references or entity references, and a new CDATA section MUST be opened for any further characters in the text node.

CDATA sections MUST NOT be used except where they have been explicitly requested by the user, either by using the cdata-section-elements parameter, or by using some other implementation-defined mechanism.

This is phrased to permit an implementor to provide an option that attempts to preserve CDATA sections present in the source document.

An serializer may provide an implementation-defined mechanism to place CDATA sections in the result tree.

XML Output Method: the omit-xml-declaration and standalone Parameters

The XML output method MUST output an XML declaration if the omit-xml-declaration parameter has the value no. The XML declaration MUST include both version information and an encoding declaration. If the standalone parameter has the value yes or the value no, the XML declaration MUST include a standalone document declaration with the same value as the value of the standalone parameter. If the standalone parameter has the value omit, the XML declaration MUST NOT include a standalone document declaration; this ensures that it is both an XML declaration (allowed at the beginning of a document entity) and a text declaration (allowed at the beginning of an external general parsed entity).

A serialization error results if the omit-xml-declaration parameter has the value yes, and

the standalone parameter has a value other than omit; or

the version parameter has a value other than 1.0 and the doctype-system parameter is specified.

The serializer MUST signal the error.

Otherwise, if the omit-xml-declaration parameter has the value yes, the XML output method MUST NOT output an XML declaration.

XML Output Method: the doctype-system and doctype-public Parameters

If the doctype-system parameter is specified, the XML output method MUST output a document type declaration immediately before the first element. The name following <!DOCTYPE MUST be the name of the first element, if any. If the doctype-public parameter is also specified, then the XML output method MUST output PUBLIC followed by the public identifier and then the system identifier; otherwise, it MUST output SYSTEM followed by the system identifier. The internal subset MUST be empty. The doctype-public parameter MUST be ignored unless the doctype-system parameter is specified.

XML Output Method: the undeclare-prefixes Parameter

The Data Model allows an element node that binds a non-empty prefix to have a child element node that does not bind that same prefix. In Namespaces in XML 1.1 (), this can be represented accurately by undeclaring namespaces. If the undeclare-prefixes parameter has the value yes, the output method is XML, and the version parameter value is greater than 1.0, the serializer MUST undeclare namespaces.

Consider an element x:foo with four in-scope namespaces that associate prefixes with URIs as follows:

x is associated with http://example.org/x

y is associated with http://example.org/y

z is associated with http://example.org/z

xml is associated with http://www.w3.org/XML/1998/namespace

Suppose that it has a child element x:bar with three in-scope namespaces:

x is associated with http://example.org/x

y is associated with http://example.org/y

xml is associated with http://www.w3.org/XML/1998/namespace

If namespace undeclaration is in effect, it will be serialized this way:

<x:foo xmlns:x="http://example.org/x" xmlns:y="http://example.org/y" xmlns:z="http://example.org/z"> <x:bar xmlns:z="">...</x:bar> </x:foo>

In Namespaces in XML (), namespace undeclaration is not possible. If the output method is XML, the value of the undeclare-prefixes parameter is yes, and the value of the version parameter is 1.0, a serialization error results; the serializer MUST signal the error.

XML Output Method: the normalization-form Parameter

The normalization-form parameter is applicable to the XML output method. The values NFC and none MUST be supported by the serializer. A serialization error results if the value of the normalization-form parameter specifies a normalization form that is not supported by the serializer; the serializer MUST signal the error.

It is a serialization error if the value of the parameter is fully-normalized and any relevant construct of the result begins with a combining character. The serializer MUST signal the error. See Section 2.13 of for the definition of the relevant constructs of XML.

XML Output Method: the media-type Parameter

The media-type parameter is applicable to the XML output method. See for more information.

XML Output Method: the use-character-maps Parameter

The use-character-maps parameter is applicable to the XML output method. See for more information.

XML Output Method: the byte-order-mark Parameter

The byte-order-mark parameter is applicable to the XML output method. See for more information.

XML Output Method: the escape-uri-attributes Parameter

The escape-uri-attributes parameter is not applicable to the XML output method. It is the responsibility of the host language to specify whether an error occurs if this parameter is specified in combination with the XML output method, or if the parameter is simply dropped.

XML Output Method: the include-content-type Parameter

The include-content-type parameter is not applicable to the XML output method. It is the responsibility of the host language to specify whether an error occurs if this parameter is specified in combination with the XML output method, or if the parameter is simply dropped.

XHTML Output Method

The XHTML output method serializes the instance of the data model as XML, using the HTML compatibility guidelines defined in the XHTML specification.

It is entirely the responsibility of the person or process that creates the instance of the data model to ensure that the instance of the data model conforms to the or specification. It is not an error if the instance of the data model is invalid XHTML. Equally, it is entirely under the control of the person or process that creates the instance of the data model whether the output conforms to XHTML 1.0 Strict, XHTML 1.0 Transitional, or any other specific definition of XHTML.

The serialization of the instance of the data model follows the same rules as for the XML output method, with the general exceptions noted below and parameter-specific exceptions in . These differences are based on the HTML compatibility guidelines published in Appendix C of , which are designed to ensure that as far as possible, XHTML is rendered correctly on user agents designed originally to handle HTML.

The following XHTML elements have an EMPTY content model: area, base, br, col, hr, img, input, link, meta, basefont, frame, isindex, and param. Given an empty instance of an XHTML element whose content model is not EMPTY (for example, an empty title or paragraph) the serializer MUST NOT use the minimized form. That is, it MUST output <p></p> and not <p />.

Given an XHTML element whose content model is EMPTY, the serializer MUST use the minimized tag syntax, for example <br />, as the alternative syntax <br></br> allowed by XML gives uncertain results in many existing user agents. The serializer MUST include a space before the trailing />, e.g. <br />, <hr /> and <img src="karen.jpg" alt="Karen" />.

The serializer MUST NOT use the entity reference ' which, although legal in XML and therefore in XHTML, is not defined in HTML and is not recognized by all HTML user agents.

The serializer SHOULD output namespace declarations in a way that is consistent with the requirements of the XHTML DTD if this is possible. The XHTML 1.0 DTDs require the declaration xmlns="http://www.w3.org/1999/xhtml" to appear on the html element, and only on the html element. The serializer MUST output namespace declarations that are consistent with the namespace nodes present in the result tree, but it MUST avoid outputting redundant namespace declarations on elements where the DTD would make them invalid.

If the html element is generated by an XSLT literal result element of the form <html xmlns="http://www.w3.org/1999/xhtml"> ... </html>, or by an XQuery direct element constructor of the same form, then the html element in the result document will have a node name whose prefix is "", which will satisfy the requirements of the DTD. In other cases the prefix assigned to the element is implementation-dependent.

Appendix C of describes a number of compatibility guidelines for users of XHTML who wish to render their XHTML documents with HTML user agents. In some cases, such as the guideline on the form empty elements should take, only the serialization process itself has the ability to follow the guideline. In such cases, those guidelines are reflected in the requirements on the serializer described above.

In all other cases, the guidelines can be adhered to by the instance of the data model that is input to the serialization process. The guideline on the use of whitespace characters in attribute values is one such example. Another example is that xml:lang="..." does not serialize to both xml:lang="..." and lang="..." as required by some legacy user agents. It is the responsibility of the person or process that creates the instance of the data model that is input to the serialization process to ensure it is created in a way that is consistent with the guidelines. No serialization error results if the input instance of the data model does not adhere to the guidelines.

The Influence of Serialization Parameters upon the XHTML Output Method XHTML Output Method: the version Parameter

The behavior for version parameter for the XHTML output method is described in .

XHTML Output Method: the encoding Parameter

The behavior for encoding parameter for the XHTML output method is described in .

XHTML Output Method: the indent Parameter

If the indent parameter has the value yes, the serializer MAY add or remove whitespace as it serializes the result tree, so long as it does not change the way that a conforming HTML user agent would render the output.

This rule can be satisfied by observing the following constraints:

Whitespace MUST NOT be added other than before or after an element, or adjacent to an existing whitespace character.

Whitespace MUST NOT be added or removed adjacent to an inline element. The inline elements are those elements in the XHTML namespace in the %inline category of any of the XHTML 1.0 DTD's, in the %inline.class category of the XHTML 1.1 DTD, and elements in the XHTML namespace with local names ins and del if they are used as inline elements (i.e., if they do not contain element children).

Whitespace MUST NOT be added or removed inside a formatted element, the formatted elements being those in the XHTML namespace with local names pre, script, style, and textarea.

The HTML definition of whitespace is different from the XML definition: see section 9.1 of 4.01 specification.

XHTML Output Method: the cdata-section-elements Parameter

The behavior for cdata-section-elements parameter for the XHTML output method is described in .

XHTML Output Method: the omit-xml-declaration and standalone Parameters

The behavior for omit-xml-declaration and standalone parameters for the XHTML output method is described in .

As with the XML output method, the XHTML output method specifies that an XML declaration will be output unless it is suppressed using the omit-xml-declaration parameter. Appendix C.1 of provides advice on the consequences of including, or omitting, the XML declaration.

XHTML Output Method: the doctype-system and doctype-public Parameters

The behavior for doctype-system and doctype-public parameters for the XHTML output method is described in .

XHTML Output Method: the undeclare-prefixes Parameter

The behavior for undeclare-prefixes parameter for the XHTML output method is described in .

XHTML Output Method: the normalization-form Parameter

The behavior for normalization-form parameter for the XHTML output method is described in .

XHTML Output Method: the media-type Parameter

The behavior for media-type parameter for the XHTML output method is described in .

XHTML Output Method: the use-character-maps Parameter

The behavior for use-character-maps parameter for the XHTML output method is described in .

XHTML Output Method: the byte-order-mark Parameter

The behavior for byte-order-mark parameter for the XHTML output method is described in .

XHTML Output Method: the escape-uri-attributes Parameter

If the escape-uri-attributes parameter has the value yes, the XHTML output method MUST apply URI escaping to URI attribute values, except that relative URIs MUST NOT be absolutized.

This escaping is deliberately confined to non-ASCII characters, because escaping of ASCII characters is not always appropriate, for example when URIs or URI fragments are interpreted locally by the HTML user agent. Even in the case of non-ASCII characters, escaping can sometimes cause problems. More precise control of URI escaping is therefore available by setting escape-uri-attributes to no, and controlling the escaping of URIs by means of the fn:escape-uri function defined in .

XHTML Output Method: the include-content-type Parameter

If the instance of the data model includes a head element in the XHTML namespace, and the include-content-type parameter has the value yes, the XHTML output method MUST add a meta element as the first child element of the head element, specifying the character encoding actually used.

For example,

<head> <meta http-equiv="Content-Type" content="text/html; charset=EUC-JP" /> ...

The content type SHOULD be set to the value given for the media-type parameter.

It is recommended that the host language use as default value for this parameter one of the MIME types () registered for XHTML. Currently, these are text/html (registered by ) and application/xhtml-xml (registered by ). Note that some user agents fail to recognize the charset parameter if the content type is not text/html.

If a meta element has been added to the head element as described above, then any existing meta element child of the head element having an http-equiv attribute with the value "Content-Type", making the comparison without consideration of casing and leading/trailing spaces, MUST be discarded.

This process removes possible parameters in the attribute value. For example,

in the data model instance would be replaced by,

The HTML output method serializes the instance of the data model as HTML.

For example, the following XSL stylesheet generates html output,

<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="html" version="4.0"/> <xsl:template match="/"> <html> <xsl:apply-templates/> </html> </xsl:template> ... </xsl:stylesheet>

In the example, the version attribute of the xsl:output element indicates the version of the HTML Recommendation to which the serialized result is to conform.

It is entirely the responsibility of the person or process that creates the instance of the data model to ensure that the instance of the data model conforms to the HTML Recommendation . It is not an error if the instance of the data model is invalid HTML. Equally, it is entirely under the control of the person or process that creates the instance of the data model whether the output conforms to HTML.

Markup for Elements

The HTML output method MUST NOT output an element differently from the XML output method unless the expanded QName of the element has a null namespace URI. An element whose expanded QName has a non-null namespace URI MUST be output as XML. This is known as an XML Island. If the expanded QName of the element has a null namespace URI, but the local part of the expanded QName is not recognized as the name of an HTML element, the element MUST be output in the same way as a non-empty, inline element such as span. In particular:

If the result tree contains namespace nodes for namespaces other than the XML namespace, the HTML output method MUST represent these namespaces using attributes named xmlns or xmlns:prefix in the same way as the XML output method would represent them when the version parameter is set to 1.0.

If the result tree contains elements or attributes whose names have a non-null namespace URI, the HTML output method MUST generate namespace-prefixed QNames for these nodes in the same way as the XML output method would do when the version parameter is set to 1.0.

Where special rules are defined later in this section for serializing specific HTML elements and attributes, these rules MUST NOT be applied to an element or attribute whose name has a non-null namespace URI. However, the generic rules for the HTML output method that apply to all elements and attributes, for example the rules for escaping special characters in the text and the rules for indentation, MUST be used also for namespaced elements and attributes.

When serializing an element whose name is not defined in the HTML specification, but that is in the null namespace, the HTML output method MUST apply the same rules (for example, indentation rules) as when serializing a span element. The descendants of such an element MUST be serialized as if they were descendants of a span element.

When serializing an element whose name is in a non-null namespace, the HTML output method MUST apply the same rules (for example, indentation rules) as when serializing a div element. The descendants of such an element MUST be serialized as if they were descendants of a div element.

The HTML output method MUST NOT output an end-tag for empty elements. For HTML 4.0, the empty elements are area, base, basefont, br, col, frame, hr, img, input, isindex, link, meta and param. For example, an element written as <br/> or <br></br> in an XSLT stylesheet MUST be output as <br>.

The HTML output method MUST recognize the names of HTML elements regardless of case. For example, elements named br, BR or Br MUST all be recognized as the HTML br element and output without an end-tag.

The HTML output method MUST NOT perform escaping for the content of the script and style elements.

For example, a script element created by an XQuery direct element constructor or an XSLT literal result element, such as:

MUST be output as

A common requirement is to output a script element as shown in the example below:

This is illegal HTML, for the reasons explained in section B.3.2 of the 4.01 specification. Nevertheless, it is possible to output this fragment, using either of the following constructs:

Firstly, by use of a script element created by an XQuery direct element constructor or an XSLT literal result element:

Secondly, by constructing the markup from ordinary text characters:

As the specification points out, the correct way to write this is to use the escape conventions for the specific scripting language. For JavaScript, it can be written as:

The 4.01 specification also shows examples of how to write this in various other scripting languages. The escaping MUST be done manually, it will not be done by the serializer.

Writing Attributes

The HTML output method MUST NOT escape "<" characters occurring in attribute values.

The HTML output method MUST output boolean attributes (that is attributes with only a single allowed value that is equal to the name of the attribute) in minimized form.

For example, a start-tag created using the following XQuery direct element constructor or XSLT literal result element

MUST be output as

The HTML output method MUST NOT escape a & character occurring in an attribute value immediately followed by a { character (see Section B.7.1 of the HTML Recommendation ).

For example, a start-tag created using the following XQuery direct element constructor or XSLT literal result element

MUST be output as

See for additional directives on how attributes may be written.

Writing Character Data

The HTML output method MAY output a character using a character entity reference in preference to using a numeric character reference, if an entity is defined for the character in the version of HTML that the output method is using. Entity references and character references SHOULD be used only where the character is not present in the selected encoding, or where the visual representation of the character is unclear (as with  , for example).

When outputting a sequence of whitespace characters in the instance of the data model, within an element where whitespace is treated normally (but not in elements such as pre and textarea), the HTML output method MAY represent it using any sequence of whitespace that will be treated in the same way by an HTML user agent. See section 3.5 of for some additional information on handling of whitespace by an HTML user agent.

Certain characters, specifically the control characters #x7F-#x9F, are legal in XML but not in HTML. It is a serialization error to use the HTML output method when such characters appear in the instance of the data model. The serializer MUST signal the error.

The HTML output method MUST terminate processing instructions with > rather than ?>. It is a serialization error to use the HTML output method when > appears within a processing instruction in the data model instance being serialized.

The Influence of Serialization Parameters upon the HTML Output Method HTML Output Method: the version Parameter

The version attribute indicates the version of the HTML Recommendation to which the serialized result is to conform. If the serializer does not support the version of HTML specified by this parameter, it MUST signal a serialization error .

HTML Output Method: the encoding Parameter

The encoding parameter specifies the encoding to be used. Serializers are REQUIRED to support values of UTF-8 and UTF-16. A serialization error occurs if an output encoding other than UTF-8 or UTF-16 is requested and the serializer does not support that encoding. The serializer MUST signal the error.

It is possible that the instance of the data model will contain a character that cannot be represented in the encoding that the serializer is using for output. In this case, if the character occurs in a context where HTML recognizes character references, then the character MUST be output as a character entity reference or decimal numeric character reference; otherwise (for example, in a script or style element or in a comment), the serializer MUST signal a serialization error .

See regarding how this parameter is used with the include-content-type parameter.

HTML Output Method: the indent Parameter

If the indent parameter has the value yes, then the HTML output method MAY add or remove whitespace as it serializes the result tree, so long as it does not change the way that a conforming HTML user agent would render the output.

This rule can be satisfied by observing the following constraints:

Whitespace MUST NOT be added other than before or after an element, or adjacent to an existing whitespace character.

Whitespace MUST NOT be added or removed adjacent to an inline element. The inline elements are those included in the %inline category of any of the HTML 4.01 DTD's, as well as the ins and del elements if they are used as inline elements (i.e., if they do not contain element children).

Whitespace MUST NOT be added or removed inside a formatted element, the formatted elements being pre, script, style, and textarea.

Note that the HTML definition of whitespace is different from the XML definition (see section 9.1 of the specification).

HTML Output Method: the cdata-section-elements Parameter

The cdata-section-elements parameter is not applicable to the HTML output method, except in the case of XML Islands.

HTML Output Method: the omit-xml-declaration and standalone Parameters

The omit-xml-declaration and standalone parameters are not applicable to the HTML output method.

HTML Output Method: the doctype-system and doctype-public Parameters

If the doctype-public or doctype-system parameters are specified, then the HTML output method MUST output a document type declaration immediately before the first element. The name following <!DOCTYPE MUST be HTML or html. If the doctype-public parameter is specified, then the output method MUST output PUBLIC followed by the specified public identifier; if the doctype-system parameter is also specified, it MUST also output the specified system identifier following the public identifier. If the doctype-system parameter is specified but the doctype-public parameter is not specified, then the output method MUST output SYSTEM followed by the specified system identifier.

HTML Output Method: the undeclare-prefixes Parameter

The undeclare-prefixes parameter is not applicable to the HTML output method, except in the case of XML Islands.

HTML Output Method: the normalization-form Parameter

The normalization-form parameter is applicable to the HTML output method. The values NFC and none MUST be supported by the serializer. A serialization error results if the value of the normalization-form parameter specifies a normalization form that is not supported by the serializer; the serializer MUST signal the error.

HTML Output Method: the media-type Parameter

The media-type parameter is applicable to the HTML output method. See for more information. See regarding how this parameter is used with the include-content-type parameter.

HTML Output Method: the use-character-maps Parameter

The use-character-maps parameter is applicable to the HTML output method. See for more information.

HTML Output Method: the byte-order-mark Parameter

The byte-order-mark parameter is applicable to the HTML output method. See for more information.

HTML Output Method: the escape-uri-attributes Parameter

If the escape-uri-attributes parameter has the value yes, the HTML output method MUST apply URI escaping to URI attribute values, except that relative URIs MUST NOT be absolutized.

HTML Output Method: the include-content-type Parameter

If there is a head element, and the include-content-type parameter has the value yes, the HTML output method MUST add a meta element as the first child element of the head element specifying the character encoding actually used.

For example,

<HEAD> <META http-equiv="Content-Type" content="text/html; charset=EUC-JP"> ...

The content type MUST be set to the value given for the media-type parameter.

This process removes possible parameters in the attribute value. For example,

in the data model instance would be replaced by,

The Text output method serializes the instance of the data model by outputting the string value of the document node created by sequence normalization, without any escaping.

A newline character in the instance of the data model MAY be output using any character sequence that is conventionally used to represent a line ending in the chosen system environment.

The Influence of Serialization Parameters upon the Text Output Method Text Output Method: the version Parameter

The version parameter is not applicable to the Text output method.

Text Output Method: the encoding Parameter

The encoding parameter identifies the encoding that the Text output method MUST use to convert sequences of characters to sequences of bytes. Serializers are REQUIRED to support values of UTF-8 and UTF-16. A serialization error occurs if the serializer does not support the encoding specified by the encoding parameter. The serializer MUST signal the error. If the instance of the data model contains a character that cannot be represented in the encoding that the serializer is using for output, the serializer MUST signal a serialization error .

Text Output Method: the indent Parameter

The indent parameter is not applicable to the Text output method.

Text Output Method: the cdata-section-elements Parameter

The cdata-section-elements parameter is not applicable to the Text output method.

Text Output Method: the omit-xml-declaration and standalone Parameters

The omit-xml-declaration and standalone parameters are not applicable to the Text output method.

Text Output Method: the doctype-system and doctype-public Parameters

The doctype-system and doctype-public parameters are not applicable to the Text output method.

Text Output Method: the undeclare-prefixes Parameter

The undeclare-prefixes parameter is not applicable to the Text output method.

Text Output Method: the normalization-form Parameter

The normalization-form parameter is applicable to the Text output method. The values NFC and none MUST be supported by the serializer. A serialization error results if the value of the normalization-form parameter specifies a normalization form that is not supported by the serializer; the serializer MUST signal the error.

Text Output Method: the media-type Parameter

The media-type parameter is applicable to the Text output method. See for more information.

Text Output Method: the use-character-maps Parameter

The use-character-maps parameter is applicable to the Text output method. See for more information.

Text Output Method: the byte-order-mark Parameter

The byte-order-mark parameter is applicable to the Text output method. See for more information.

Text Output Method: the escape-uri-attributes Parameter

The escape-uri-attributes parameter is not applicable to the Text output method.

Text Output Method: the include-content-type Parameter

The include-content-type parameter is not applicable to the Text output method.

Character Maps

The use-character-maps parameter is a list of characters and corresponding string substitutions.

Character maps allow a specific character appearing in a text or attribute node in the instance of the data model to be replaced with a specified string of characters during serialization. The string that is substituted is output "as is," and the serializer performs no checks that the resulting document is well-formed. This mechanism can therefore be used to introduce arbitrary markup in the serialized output. See of for examples of using character mapping in XSLT.

Character mapping is applied to the characters that actually appear in a text or attribute node in the instance of the data model, before any other serialization operations such as escaping or Unicode Normalization are applied. If a character is mapped, then it is not subjected to XML or HTML escaping, nor to Unicode Normalization. The string that is substituted for a character is not validated or processed in any way by the serializer, except for translation into the target encoding. In particular, it is not subjected to XML or HTML escaping, it is not subjected to Unicode Normalization, and it is not subjected to further character mapping.

Character mapping is not applied to characters in text nodes whose parent elements are listed in the cdata-section-elements parameter, nor to characters for which output escaping has been disabled (disabling output escaping is an feature), nor to characters in attribute values that are subject to URI escaping defined for the HTML and XHTML output methods, unless URI escaping has been disabled using the escape-uri-attributes parameter in the output definition.

On serialization, occurrences of a character specified in the use-character-maps in text nodes and attribute values are replaced by the corresponding string from the use-character-maps parameter.

Using a character map can result in non-well-formed documents if the string contains XML-significant characters. For example, it is possible to create documents containing unmatched start and end tags, references to entities that are not declared, or attributes that contain tags or unescaped quotation marks.

If a character is mapped, then it is not subjected to XML or HTML escaping.

A serialization error occurs if character mapping causes the output of a string containing a character that cannot be represented in the encoding that the serializer is using for output. The serializer MUST signal the error.

Conformance

Serialization is intended primarily as a component of a host language such as or . Therefore, this document relies on specifications that use it to specify conformance criteria for Serialization in their respective environments. Specifications that set conformance criteria for their use of Serialization MUST NOT change the semantic definitions of Serialization as given in this specification, except by subsetting and/or compatible extensions. It is the responsibility of the host language to specify how serialization errors should be handled.

Certain facilities in this specification are described as producing implementation-defined results. A claim that asserts conformance with this specification MUST be accompanied by documentation stating the effect of each implementation-defined feature. For convenience, a non-normative checklist of implementation-defined features is provided at .

References Normative References Unicode Character Encoding Model, Unicode Consortium. Unicode Standard Annex #17. Unicode Normalization Forms, Unicode Consortium. Unicode Standard Annex #15. Informative References Summary of Error Conditions

It is a error if an item in S₆ in sequence normalization is an attribute node or a namespace node.

It is an error if the serializer is unable to satisfy the rules for either a well-formed XML document entity or a well-formed XML external general parsed entity, or both, except for content modified by the character expansion phase of serialization.

It is an error to specify the doctype-system parameter, or to specify the standalone parameter with a value other than omit, if the instance of the data model contains text nodes or multiple element nodes