XML Digital Signatures Working Group D. Eastlake, INTERNET-DRAFT IBM draft-ietf-xmldsig-core-07.txt J. Reagle, Expires December 01, 2000 W3C/MIT D. Solo, Citigroup XML-Signature Syntax and Processing Copyright Notice Copyright (c) 2000 The Internet Society & W3C (MIT, INRIA, Keio), All Rights Reserved. IETF Status of this Memo This document is an Internet-Draft and is in full conformance with all provisions of Section 10 of RFC2026. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet- Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. W3C Status of this document This document is a production of the joint IETF/W3C XML Signature Working Group. http://www.w3.org/Signature The comparable html draft of this version may be found at http://www.w3.org/TR/2000/WD-xmldsig-core-20000601/ The latest version of this draft series may be found at: http://www.w3.org/TR/xmldsig/ This specification of the IETF/W3C XML Signature Working Group follows the XML Signature Last Call and attempts to address all last call comments sent to the list and those issues discussed at the April meeting. This is the version being forward to the IESG and W3C Director for consideration as a Proposed Draft and Candidate Recommendation. During this phase we will hope to gain implementation Eastlake, Reagle, Solo [Page 1] Internet Draft XML-Signature Syntax and Processing June 2000 experience over the following 1. Ensure that our use of schema namespaces and qualifications provides a single schema that can be used for enveloped signatures (signature within content being signed), enveloping signatures (content is within signature being signed) and detached signatures (over data external to the signature document). 2. Further test our employment of URIs, IDs, and XPath 3. Ensure that if the syntax constraints of section 7.1 are followed, a validating parser is not needed. 4. Clarify remaining ambiguities related to the cryptographic and keying information 5. Presently, there are interoperable implementations of the 19991115 draft of the Canonical XML [XML-C14N] specification and that algorithm is used in the examples in this version of the specification. However, further implementation experience will be used to refine the 20000601 version [XML-C14N-a] which will then replace the older version as the MANDATORY canonicalization algorithm. 6. And demonstrate interoperability over all required and recommended features. Please send comments to the editors and cc: the list . Publication as a Working Draft does not imply endorsement by the W3C membership or IESG. It is inappropriate to cite W3C Drafts as other than "work in progress." A list of current W3C working drafts can be found at http://www.w3.org/TR/. Current IETF drafts can be found at http://www.ietf.org/1id-abstracts.html. Patent disclosures relevant to this specification may be found on the Working Group's patent disclosure page. Abstract This document specifies XML digital signature processing rules and syntax. XML Signatures provide integrity, message authentication, and/or signer authentication services for data of any type, whether located within the XML that includes the signature or elsewhere. Table of Contents 1. Introduction 1. Editorial Conventions 2. Design Philosophy 3. Versions, Namespaces and Identifiers 4. Acknowledgements 2. Signature Overview and Examples 1. Simple Example (Signature, SignedInfo, Methods, and References) 1. More on Reference 2. Extended Example (Object and SignatureProperty) 3. Extended Example (Object and Manifest) 3. Processing Rules 1. Signature Generation Eastlake, Reagle, Solo [Page 2] Internet Draft XML-Signature Syntax and Processing June 2000 2. Signature Validation 4. Core Signature Syntax 1. The Signature element 2. The SignatureValue Element 3. The SignedInfo Element 1. The CanonicalizationMethod Element 2. The SignatureMethod Element 3. The Reference Element 1. The Transforms Element 2. The DigestMethod Element 3. The DigestValue Element 4. The KeyInfo Element 5. The Object Element 5. Additional Signature Syntax 1. The Manifest Element 2. The SignatureProperties Element 3. Processing Instructions 4. Comments in dsig Elements 6. Algorithms 1. Algorithm Identifiers and Implementation Requirements 2. Message Digests 3. Message Authentication Codes 4. Signature Algorithms 5. Canonicalization Algorithms 6. Transform Algorithms 1. Canonicalization 2. Base64 3. XPath Filtering 4. Enveloped Signature Transform 5. XSLT Transform 7. XML Canonicalization and Syntax Constraint Considerations 1. XML 1.0, Syntax Constraints, and Canonicalization 2. DOM/SAX Processing and Canonicalization 8. Security Considerations 1. Only What is Signed is Secure 2. Only What is "Seen" Should be Signed 3. Check the Security Model 4. Algorithms, Key Lengths, Etc. 9. Schema, DTD, Data Model,and Valid Example 10. Definitions 11. References 12. Authors' Address _________________________________________________________________ 1.0 Introduction This document specifies XML syntax and processing rules for creating and representing digital signatures. XML Signatures can be applied to any digital content (data object), including XML. An XML Signature may be applied to the content of one or more resources. Enveloped or enveloping signatures are over data within the same XML document as the signature; detached signatures are over data external to the signature element. Eastlake, Reagle, Solo [Page 3] Internet Draft XML-Signature Syntax and Processing June 2000 This specification also defines other useful types including methods of referencing collections of resources, algorithms, and keying information and management. 1.1 Editorial Conventions For readability, brevity, and historic reasons this document uses the term "signature" to generally refer to digital authentication values of all types.Obviously, the term is also strictly used to refer to authentication values that are based on public keys and that provide signer authentication. When specifically discussing authentication values based on symmetric secret key codes we use the terms authenticators or authentication codes. (See section 8.3:Check the Security Model.) This specification uses both XML Schemas [XML-schema] and DTDs [XML]. (Readers unfamiliar with DTD syntax may wish to refer to Ron Bourret's " Declaring Elements and Attributes in an XML DTD" [Bourret].) The schema definition is presently normative. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this specification are to be interpreted as described in RFC2119 [KEYWORDS]: "they MUST only be used where it is actually required for interoperation or to limit behavior which has potential for causing harm (e.g., limiting retransmissions)" Consequently, we use these capitalized keywords to unambiguously specify requirements over protocol and application features and behavior that affect the interoperability and security of implementations. These key words are not used (capitalized) to describe XML grammar; schema definitions unambiguously describe such requirements and we wish to reserve the prominence of these terms for the natural language descriptions of protocols and features. For instance, an XML attribute might be described as being "optional." Compliance with the XML-namespace specification [XML-ns] is described as "REQUIRED." 1.2 Design Philosophy The design philosophy and requirements of this specification are addressed in the XML-Signature Requirements document [XML-Signature-RD]. 1.3 Versions, Namespaces and Identifiers No provision is made for an explicit version number in this syntax. If a future version is needed, it will use a different namespace The XML namespace [XML-ns] URI that MUST be used by implementations of this (dated) specification is: Eastlake, Reagle, Solo [Page 4] Internet Draft XML-Signature Syntax and Processing June 2000 xmlns="http://www.w3.org/2000/02/xmldsig#" This namespace is also used as the prefix for algorithm identifiers used by this specification. While applications MUST support XML and XML-namespaces, the use of internal entities [XML] or our "dsig" XML namespace prefix and defaulting/scoping conventions are OPTIONAL; we use these facilities to provide compact and readable examples. This specification uses Uniform Resource Identifiers [URI] to identify resources, algorithms, and semantics. The URI in the namespace declaration above is also used as a prefix for URIs under the control of this specification. For resources not under the control of this specification, we use the designated Uniform Resource Names [URN] or Uniform Resource Locators [URL] defined by its normative external specification. If an external specification has not allocated itself a Uniform Resource Identifier we allocate an identifier under our own namespace. For instance: SignatureProperties is identified and defined by this specification's namespace http://www.w3.org/2000/02/xmldsig#SignatureProperties XSLT is identified and defined by an external namespace http://www.w3.org/TR/1999/PR-xslt-19991008 SHA1 is identified via this specification's namespace and defined via a normative reference http://www.w3.org/2000/02/xmldsig#sha1 FIPS PUB 180-1. Secure Hash Standard. U.S. Department of Commerce/National Institute of Standards and Technology. Finally, in order to provide for terse namespace declarations we sometimes use XML internal entities [XML] as macros within URIs. For instance: ]> ... 1.4 Acknowledgements The contributions of the following working group members to this specification are gratefully acknowledged: * Mark Bartel, JetForm Corporation (Author) * John Boyer, PureEdge (Author) * Mariano P. Consens, University of Waterloo * Donald Eastlake 3rd, Motorola (Chair, Author/Editor) * Barb Fox, Microsoft (Author) * Christian Geuer-Pollmann, University Siegen * Tom Gindin, IBM Eastlake, Reagle, Solo [Page 5] Internet Draft XML-Signature Syntax and Processing June 2000 * Phillip Hallam-Baker, VeriSign Inc * Richard Himes, US Courts * Brian LaMacchia, Microsoft * Peter Lipp, IAIK TU Graz * Joseph Reagle, W3C (Chair, Author/Editor) * Ed Simon, Entrust Technologies Inc. (Author) * David Solo, Citigroup (Author/Editor) * Petteri Stenius, Remtec Systems * Raghavan Srinivas, Sun * Kent Tamura, IBM * Winchel Todd Vincent III, GSU * Greg Whitehead, Signio Inc. * Gregor Karlinger, IAIK TU Graz As are the last call comments from the following: * Dan Connolly, W3C * Paul Biron, Kaiser Permanente, on behalf of the XML Schema WG. * Martin J. Duerst, W3C; and Masahiro Sekiguchi, Fujitsu; on behalf of the Internationalization WG/IG. * Jonathan Marsh, Microsoft, on behalf of the Extensible Stylesheet Language WG. 2.0 Signature Overview and Examples This section provides an overview and examples of XML digital signature syntax. The specific processing is given in section 3: Processing Rules. The formal syntax is found in section 4: Core Signature Syntax and section 5: Additional Signature Syntax. In this section, an informal representation and examples are used to describe the structure of the XML signature syntax. This representation and examples may omit attributes, details and potential features that are fully explained later. XML Signatures are applied to arbitrary digital content (data objects) via an indirection. Data objects are digested, the resulting value is placed in an element (with other information) and that element is then digested and cryptographically signed. XML digital signatures are represented by the Signature element which has the following structure (where "?" denotes zero or one occurrence; "+" denotes one or more occurrences; and "*" denotes zero or more occurrences): (CanonicalizationMethod)? (SignatureMethod) (Transforms)? (DigestMethod) (DigestValue) ()+ (SignatureValue) (KeyInfo)? Eastlake, Reagle, Solo [Page 6] Internet Draft XML-Signature Syntax and Processing June 2000 (Object)* The content that is signed was, at the time of signature creation, referred to as an identified resource to which the specified transforms were applied. Signatures are related to data objects via URIs [URI]. Within an XML document, signatures are related to local data objects via fragment identifiers. Such local data can be included within an enveloping signature or can enclose an enveloped signature. Detached signatures are over external network resources or local data objects that resides within the same XML document as sibling elements; in this case, the signature is neither enveloping (signature is parent) nor enveloped (signature is child). Since a Signature element (and its Id attribute value/name) may co-exist or be combined with other elements (and their IDs) within a single XML document, care should be taken in choosing names such that there are no subsequent collisions that violate the ID uniqueness validity constraint [XML]. 2.1 Simple Example (Signature, SignedInfo, Methods, and References) The following example is a detached signature of the content of the HTML4 in XML specification. [s01] [s02] [s03] [s04] [s05] [s06] [s07] [s08] [s09] [s10] j6lwx3rvEPO0vKtMup4NbeVu8nk= [s11] [s12] [s13] MC0CFFrVLtRlk=... [s14] [s15a] [s15b] [s15c]

...

......... [s15d]
[s15e]
[s16]
[s17]
[s02-12] The required SignedInfo element is the information that is actually signed. Core validation of SignedInfo consists of two Eastlake, Reagle, Solo [Page 7] Internet Draft XML-Signature Syntax and Processing June 2000 mandatory processes: validation of the signature over SignedInfo and validation of each Reference digest within SignedInfo. Note that the algorithms used in calculating the SignatureValue are also included in the signed information while the SignatureValue element is outside SignedInfo. [s03] The CanonicalizationMethod is the algorithm that is used to canonicalize the SignedInfo element before it is digested as part of the signature operation. In the absence of a CanonicalizationMethod element, no canonicalization is done. [s04] The SignatureMethod is the algorithm that is used to convert the canonicalized SignedInfo into the SignatureValue. It is a combination of a digest algorithm and a key dependent algorithm and possibly other algorithms such as padding, for example RSA-SHA1. The algorithm names are signed to resist attacks based on substituting a weaker algorithm. To promote application interoperability we specify a set of signature algorithms that MUST be implemented, though their use is at the discretion of the signature creator. We specify additional algorithms as RECOMMENDED or OPTIONAL for implementation and the signature design permits arbitrary user algorithm specification. [s05-11] Each Reference element includes the digest method and resulting digest value calculated over the identified data object. It also may include transformations that produced the input to the digest operation. A data object is signed by computing its digest value and a signature over that value. The signature is later checked via reference and signature validation. [s14-16] KeyInfo indicates the key to be used to validate the signature. Possible forms for identification include certificates, key names, and key agreement algorithms and information -- we define only a few. KeyInfo is optional for two reasons. First, the signer may not wish to reveal key information to all document processing parties. Second, the information may be known within the application's context and need not be represented explicitly. Since KeyInfo is outside of SignedInfo, if the signer wishes to bind the keying information to the signature, a Reference can easily identify and include the KeyInfo as part of the signature. 2.1.1 More on Reference [s05] [s06] [s07] [s08] [s09] [s10] j6lwx3rvEPO0vKtMup4NbeVu8nk= [s11] [s05] The optional URI attribute of Reference identifies the data Eastlake, Reagle, Solo [Page 8] Internet Draft XML-Signature Syntax and Processing June 2000 object to be signed. This attribute may be omitted on at most one Reference in a Signature. (This limitation is imposed in order to ensure that references and objects may be matched unambiguously.) [s05-08] This identification, along with the transforms, is a description provided by the signer on how they obtained the signed data object in the form it was digested (i.e. the digested content). The verifier may obtain the digested content in another method so long as the digest verifies. In particular, the verifier may obtain the content from a different location such as a local store than that specified in the URI. [s06-08] Transforms is an optional ordered list of processing steps that were applied to the resource's content before it was digested. Transforms can include operations such as canonicalization, encoding/decoding (including compression/inflation), XSLT and XPath. XPath transforms permit the signer to derive an XML document that omits portions of the source document. Consequently those excluded portions can change without affecting signature validity. For example, if the resource being signed encloses the signature itself, such a transform must be used to exclude the signature value from its own computation. If no Transforms element is present, the resource's content is digested directly. While we specify mandatory (and optional) canonicalization and decoding algorithms, user specified transforms are permitted. [s09-10] DigestMethod is the algorithm applied to the data after Transforms is applied (if specified) to yield the DigestValue. The signing of the DigestValue is what binds a resources content to the signer's key. 2.2 Extended Example (Object and SignatureProperty) This specification does not address mechanisms for making statements or assertions. Instead, this document defines what it means for something to be signed by an XML Signature (message authentication, integrity, and/or signer authentication). Applications that wish to represent other semantics must rely upon other technologies, such as [XML, RDF]. For instance, an application might use a foo:assuredby attribute within its own markup to reference a Signature element. Consequently, it's the application that must understand and know how to make trust decisions given the validity of the signature and the meaning of assurdby syntax. We also define a SignatureProperties element type for the inclusion of assertions about the signature itself (e.g., signature semantics, the time of signing or the serial number of hardware used in cryptographic processes). Such assertions may be signed by including a Reference for the SignatureProperties in SignedInfo. While the signing application should be very careful about what it signs (it should understand what is in the SignatureProperty) a receiving application has no obligation to understand that semantic (though its parent trust engine may wish to). Any content about the signature generation may be located within the SignatureProperty element. The mandatory Target attribute references the Signature Eastlake, Reagle, Solo [Page 9] Internet Draft XML-Signature Syntax and Processing June 2000 element to which the property applies. Consider the preceding example with an additional reference to a local Object that includes a SignatureProperty element. (Such a signature would not only be detached [p02] but enveloping [p03].) [ ] ... [p01] [ ] ... [p02] [ ] ... [p03] [p05] [p06] k3453rvEPO0vKtMup4NbeVu8nk= [p07] [p08] [p09] ... [p10] [p11] [p12] [p13] [p14] 19990908 [p15] [p16] [p17] [p18] [p19] [p20]
[p04] The optional Type attribute of Reference provides information about the resource identified by the URI. In particular, it can indicate that it is an Object, SignatureProperty, or Manifest element. This can be used by applications to initiate special processing of some Reference elements. References to an XML data element within an Object element SHOULD identify the actual element pointed to. Where the element content is not XML (perhaps it is binary or encoded data) the reference should identify the Object and the Reference Type, if given, SHOULD indicate Object. Note that Type is advisory and no action based on it or checking of its correctness is required by core behavior. [p10] Object is an optional element for including data objects within the signature element or elsewhere. The Object can be optionally typed and/or encoded. [p11-18] Signature properties, such as time of signing, can be optionally signed by identifying them from within a Reference. (These properties are traditionally called signature "attributes" although that term has no relationship to the XML term "attribute".) 2.3 Extended Example (Object and Manifest) Eastlake, Reagle, Solo [Page 10] Internet Draft XML-Signature Syntax and Processing June 2000 The Manifest element is provided to meet additional requirements not directly addressed by the mandatory parts of this specification. Two requirements and the way the Manifest satisfies them follows. First, applications frequently need to efficiently sign multiple data objects even where the signature operation itself is an expensive public key signature. This requirement can be met by including multiple Reference elements within SignedInfo since the inclusion of each digest secures the data digested. However, some applications may not want the core validation behavior associated with this approach because it requires every Reference within SignedInfo to undergo reference validation -- the DigestValue elements are checked. These applications may wish to reserve reference validation decision logic to themselves. For example, an application might receive a signature valid SignedInfo element that includes three Reference elements. If a single Reference fails (the identified data object when digested does not yield the specified DigestValue) the signature would fail core validation. However, the application may wish to treat the signature over the two valid Reference elements as valid or take different actions depending on which fails. To accomplish this, SignedInfo would reference a Manifest element that contains one or more Reference elements (with the same structure as those in SignedInfo). Then, reference validation of the Manifest is under application control. Second, consider an application where many signatures (using different keys) are applied to a large number of documents. An inefficient solution is to have a separate signature (per key) repeatedly applied to a large SignedInfo element (with many References); this is wasteful and redundant. A more efficient solution is to include many references in a single Manifest that is then referenced from multiple Signature elements. The example below includes a Reference that signs a Manifest found within the Object element. [ ] ... [m01] [m03] [m04] 345x3rvEPO0vKtMup4NbeVu8nk= [m05] [ ] ... [m06] [m07] [m08] [m09] ... [m10] [m11] [m12] ... [m13] [m14] Eastlake, Reagle, Solo [Page 11] Internet Draft XML-Signature Syntax and Processing June 2000 3.0 Processing Rules The sections below describe the operations to be performed as part of signature generation and validation. 3.1 Core Generation The REQUIRED steps include the generation of Reference elements and the SignatureValue over SignedInfo. 3.1.1 Reference Generation For each data object being signed: 1. Apply the Transforms, as determined by the application, to the data object. 2. Calculate the digest value over the resulting data object. 3. Create a Reference element, including the (optional) identification of the data object, any (optional) transform elements, the digest algorithm and the DigestValue. 3.1.2 Signature Generation 1. Create SignedInfo element with SignatureMethod, CanonicalizationMethod if required, and Reference(s). 2. Canonicalize and then calculate the SignatureValue over SignedInfo based on algorithms specified in SignedInfo. 3. Construct the Signature element that includes SignedInfo, Object(s) (if desired, encoding may be different than that used for signing), KeyInfo (if required), and SignatureValue. 3.2 Core Validation The REQUIRED steps of core validation include (1) reference validation, the verification of the digest contained in each Reference in SignedInfo, and (2) the cryptographic signature validation of the signature calculated over SignedInfo. Note, there may be valid signatures that some signature applications are unable to validate. Reasons for this include failure to implement optional parts of this specification, inability or unwillingness to execute specified algorithms, or inability or unwillingness to dereference specified URIs (some URI schemes may cause undesirable side effects), etc. 3.2.1 Reference Validation For each Reference in SignedInfo: 1. Obtain the data object to be digested. (The signature application may rely upon the identification (URI) and Transforms provided by the signer in the Reference element, or it may obtain the content through other means such as a local cache.) 2. Digest the resulting data object using the DigestMethod specified in its Reference specification. Eastlake, Reagle, Solo [Page 12] Internet Draft XML-Signature Syntax and Processing June 2000 3. Compare the generated digest value against DigestValue in the SignedInfo Reference; if there is any mismatch, validation fails. 3.2.2 Signature Validation 1. Canonicalize the SignedInfo element based on the CanonicalizationMethod in SignedInfo. 2. Obtain the keying information from KeyInfo or from an external source. 3. Use the specified SignatureMethod to validate the SignatureValue over the (optionally canonicalized) SignedInfo element. 4.0 Core Signature Syntax The general structure of an XML signature is described in section 2: Signature Overview. This section provides detailed syntax of the core signature features and actual examples. Features described in this section are mandatory to implement unless otherwise indicated. The syntax is defined via DTDs and [XML-Schema] with the following XML preamble, declaration, internal entity, and simpleType: Schema Definition: ]> DTD: 4.1 The Signature element Eastlake, Reagle, Solo [Page 13] Internet Draft XML-Signature Syntax and Processing June 2000 The Signature element is the root element of a XML Signature. A simple example of a complete signature follows: Schema Definition: DTD: 4.2 The SignatureValue Element The SignatureValue element contains the actual value of the digital signature; it is encoded according to the identifier specified in SignatureMethod. Base64 [MIME] is the encoding method for all SignatureMethods specified within this specification. While we specify a mandatory and optional to implement SignatureMethod algorithms, user specified algorithms (with their own encodings) are permitted. Schema Definition: DTD: 4.3 The SignedInfo Element The structure of SignedInfo includes the canonicalization algorithm, a signature algorithm, and one or more references. The SignedInfo element may contain an optional ID attribute that will allow it to be referenced by other signatures and objects. Schema Definition: Eastlake, Reagle, Solo [Page 14] Internet Draft XML-Signature Syntax and Processing June 2000 DTD: SignedInfo does not include explicit signature or digest properties (such as calculation time, cryptographic device serial number, etc.). If an application needs to associate properties with the signature or digest, it may include such information in a SignatureProperties element within an Object element. 4.3.1 The CanonicalizationMethod Element CanonicalizationMethod is a required element that specifies the canonicalization algorithm applied to the SignedInfo element prior to performing signature calculations. This element uses the general structure for algorithms described in section 6.1: Algorithm Identifiers and Implementation Requirements. The default canonicalization algorithm (applied if this element is omitted) is Canonical XML [XML-C14N]. Alternatives, such as the minimal canonicalization algorithm (the CRLF and charset normalization specified in section 6.5.1: Minimal Canonicalization), may be explicitly specified but are NOT REQUIRED. Consequently, their use may not interoperate with other applications that do no support the specified algorithm (see section 7: XML Canonicalization and Syntax Constraint Considerations). Security issues may also arise in the treatment of entity processing and comments if minimal or other non-XML aware canonicalization algorithms are not properly constrained (see section 8.2: Only What is "Seen" Should be Signed). We RECOMMEND that resource constrained applications that do not implement the Canonical XML [XML-C14N] transform and instead choose minimal canonicalization (or some other form) are implemented to generate Canonical XML as their output serialization to easily mitigate some of these interoperability and security concerns. For instance, such an implementation SHOULD (at least) generate standalone XML instances [XML]. Schema Definition: Eastlake, Reagle, Solo [Page 15] Internet Draft XML-Signature Syntax and Processing June 2000 DTD: 4.3.2 The SignatureMethod Element SignatureMethod is a required element that specifies the algorithm used for signature generation and validation. This algorithm identifies all cryptographic functions involved in the signature operation (e.g. hashing, public key algorithms, MACs, padding, etc.). This element uses the general structure here for algorithms described in section 6.1: Algorithm Identifiers and Implementation Requirements. While there is a single identifier, that identifier may specify a format containing multiple distinct signature values. Schema Definition: DTD: 4.3.3 The Reference Element Reference is an element that may occur one or more times. It specifies a digest algorithm and digest value, and optionally an identifier of the object being signed, the type of the object, and/or a list of transforms to be applied prior to digesting. The identification (URI) and transforms describe how the digested content (i.e., the input to the digest method) was created. The Type attribute facilitates the processing of referenced data. For example, while this specification makes no requirements over external data, an application may wish to signal that the referent is a Manifest. An optional ID attribute permits a Reference to be referenced from elsewhere. Schema Definition: Eastlake, Reagle, Solo [Page 16] Internet Draft XML-Signature Syntax and Processing June 2000 DTD: The URI attribute identifies a data object using a URI-Reference, as specified by RFC2396 [URI]. (Non-ASCII characters in a URI should be represented in UTF-8 [UTF-8] as one or more bytes, and then escaping these bytes with the URI escaping mechanism. [XML]) Note that a null URI (URI="") is permitted and identifies the XML document that the reference is contained within (the root element). XML Signature applications MUST be able to parse URI syntax. We RECOMMEND they be able to dereference URIs and null URIs in the HTTP scheme. (See the section 3.2.1:Reference Validation for a further comment on URI dereferencing.) Applications should be cognizant of the fact that protocol parameter and state information, (such as a HTTP cookies, HTML device profiles or content negotiation), may affect the content yielded by dereferencing a URI. [URI] permits identifiers that specify a fragment identifier via a separating number/pound symbol '#'. (The meaning of the fragment is defined by the resource's MIME type). XML Signature applications MUST support the XPointer 'bare name' [Xptr] shortcut after '#' so as to identify IDs within XML documents. The results are serialized as specified in section 6.6.3:XPath Filtering. For example, URI="http://foo.com/bar.xml" Identifies the external XML resource 'http://foo.com/bar.xml'. URI="http://foo.com/bar.xml#chapter1" Identifies the element with ID attribute value 'chapter1' of the external XML resource 'http://foo.com/bar.xml'. URI="" Identifies the XML resource containing the signature.. URI="#chapter1" Identifies the element with ID attribute value 'chapter1' of the XML resource containing the signature. Otherwise, support of other fragment/MIME types (e.g., PDF) or XML addressing mechanisms (e.g., [XPath, Xptr]) is OPTIONAL, though we RECOMMEND support of [XPath]. Regardless, such fragment identification and addressing SHOULD be given under Transforms (not as part of the URI) so that they can be fully identified and specified. For instance, one could reference a fragment of a document that is encoded by using the Reference URI to identify the resource, and one Transform to Eastlake, Reagle, Solo [Page 17] Internet Draft XML-Signature Syntax and Processing June 2000 specify decoding, and a second to specify an XPath selection. If the URI attribute is omitted altogether, the receiving application is expected to know the identity of the object. For example, a lightweight data protocol might omit this attribute given the identity of the object is part of the application context. This attribute may be omitted from at most one Reference in any particular SignedInfo, or Manifest. The digest algorithm is applied to the data octets being secured. Typically that is done by locating (possibly using the URI if provided) the data and transforming it. If the data is an XML document, the document is assumed to be unparsed prior to the application of Transforms. If there are no Transforms, then the data is passed to the digest algorithm unmodified. The optional Type attribute contains information about the type of object being signed. This is represented as a URI. For example: Type="http://www.w3.org/2000/02/xmldsig#Object" Type="http://www.w3.org/2000/02/xmldsig#Manifest" Type="http://www.w3.org/2000/02/xmldsig#SignatureProperty" The Type attribute applies to the item being pointed at, not its contents. For example, a reference that identifies an Object element containing a SignatureProperties element is still of type #Object. The type attribute is advisory. No validation of the type information is required by this specification. 4.3.3.1 The Transforms Element The optional Transforms element contains an ordered list of Transform elements; these describe how the signer obtained the data object that was digested. The output of each Transform (octets) serves as input to the next Transform. The input to the first Transform is the source data. The output from the last Transform is the input for the DigestMethod algorithm. When transforms are applied the signer is not signing the native (original) document but the resulting (transformed) document, (see section 8.1: Only What is Signed is Secure). Each Transform consists of an Algorithm attribute and content parameters, if any, appropriate for the given algorithm. The Algorithm attribute value specifies the name of the algorithm to be performed, and the Transform content provides additional data to govern the algorithm's processing of the input resource, (see section 6.1: Algorithm Identifiers and Implementation Requirements). Some Transform may require explicit MimeType, Charset (IANA registered character set), or other such information concerning the data they are receiving from an earlier Transform or the source data, although no Transform algorithm specified in this document needs such information. Such data characteristics are provided as parameters to the Transform algorithm and should be described in the specification for the Eastlake, Reagle, Solo [Page 18] Internet Draft XML-Signature Syntax and Processing June 2000 algorithm. Schema Definition: DTD: Examples of transforms include but are not limited to base64 decoding [MIME], canonicalization [XML-C14N], XPath filtering [XPath], and XSLT [XSLT]. The generic definition of the Transform element also allows application-specific transform algorithms. For example, the transform could be a decompression routine given by a Java class appearing as a base64 encoded parameter to a Java Transform algorithm. However, applications should refrain from using application-specific transforms if they wish their signatures to be verifiable outside of their application domain. Section 6.6: Transform Algorithms defines the list of standard transformations. 4.3.3.2 The DigestMethod Element DigestMethod is a required element that identifies the digest algorithm to be applied to the signed object. This element uses the general structure here for algorithms specified in section 6.1: Algorithm Identifiers and Implementation Requirements. Schema Definition: DTD: Eastlake, Reagle, Solo [Page 19] Internet Draft XML-Signature Syntax and Processing June 2000 4.3.3.3 The DigestValue Element DigestValue is an element that contains the encoded value of the digest. The digest is always encoded using base64 [MIME]. Schema Definition: DTD: 4.4 The KeyInfo Element KeyInfo may contain keys, names, certificates and other public key management information, such as in-band key distribution or key agreement data. This specification defines a few simple types but applications may place their own key identification and exchange semantics within this element type through the XML-namespace facility. [XML-ns] Schema Definition: DTD: KeyInfo is an optional element that enables the recipient(s) to obtain the key(s) needed to validate the signature. If omitted, the recipient is expected to be able to identify the key based on application context information. Multiple declarations within KeyInfo refer to the same key. While applications may define and use any mechanism they Eastlake, Reagle, Solo [Page 20] Internet Draft XML-Signature Syntax and Processing June 2000 choose through inclusion of elements from a different namespace, compliant versions MUST implement Section 4.4.2: KeyValue and SHOULD implement Section 4.4.3: RetrievalMethod. 4.4.1 The KeyName Element The KeyName element contains a string value which may be used by the signer to communicate a key identifier to the recipient. Typically, KeyName contains an identifier related to the key pair used to sign the message, but it may contain other protocol-related information that indirectly identifies a key pair. (Common uses of KeyName include simple string names for keys, a key index, a distinguished name (DN), an email address, etc.) Schema Definition: DTD: 4.4.2 The KeyValue Element The KeyValue element contains one or more public keys that may be useful in validating the signature. Structured formats for defining DSA (REQUIRED) and RSA (RECOMMENDED) public keys are defined in Section 6.4: Signature Algorithms. Schema Definition: DTD: 4.4.3 The RetrievalMethod Element A RetrievalMethod element within KeyInfo is used to convey a pointer to KeyInfo-like information that is stored at a remote location. For example, an X.509v3 certificate chain may be published somewhere common to a number of documents; each document can reference this chain using a single RetrievalMethod element instead of including the entire chain with a sequence of X509Certificate elements. Each RetrievalMethod element contains three children elements: Location, Method and Type. Location contains a URI identifying the actual object. Method describes the process by which the data Eastlake, Reagle, Solo [Page 21] Internet Draft XML-Signature Syntax and Processing June 2000 retrieved from the Location URI should be converted into KeyInfo sub-elements. The Type sub-element describes the object type and encoding format of the data stored at the Location URI. Schema Definition: DTD: 4.4.4 The X509Data Element An X509Data element within KeyInfo contains one or more identifiers of keys/X509 certificates that may be useful for validation. Five types of X509Data pointers are defined: 1. The X509IssuerSerial element, which contains an X.509 issuer distinguished name/serial number pair, 2. The X509SubjectName element, which contains an X.509 subject distinguished name, 3. The X509SKI element, which contains an X.509 subject key identifier value. 4. The X509Certificate element, which contains a Base64-encoded X.509v3 certificate, and 5. The X509CRL element, which contains a Base64-encoded X.509v2 certificate revocation list (CRL). Multiple declarations about a single certificate (e.g., a X509SubjectName and X509IssuerSerial element) MUST be grouped inside a single X509Data element; multiple declarations about the same key but different certificates (related to that single key) MUST be grouped within a single KeyInfo element but multiple X509Data elements. For Eastlake, Reagle, Solo [Page 22] Internet Draft XML-Signature Syntax and Processing June 2000 example, the following block contains two pointers to certificate-A (issuer/serial number & SKI) and a single reference to certificate-B (Subject Name): My CA for Certificate A 12345678 31d97bd7 Subject of Certificate A Schema Definition: DTD: Eastlake, Reagle, Solo [Page 23] Internet Draft XML-Signature Syntax and Processing June 2000 4.4.5 The PGPData element The PGPData element within KeyInfo is used to convey information related to PGP public key pairs and signatures on such keys. The PGPKeyID's value is a string containing a standard PGP public key identifier as defined in Section 11.2 of [PGP]. The PGPKeyPacket contains a base64-encoded Key Material Packet as defined in Section 5.5 of [PGP]. Other sub-types of the PGPData element may be defined by the OpenPGP working group. Schema Definition: DTD: 4.4.6 The SPKIData element The SPKIData element within KeyInfo is used to convey information related to SPKI public key pairs, certificates and other SPKI data. The content of this element type is open and can be defined elsewhere. Schema Definition: DTD: 4.4.6 The MgmtData element The MgmtData element within KeyInfo is a string value used to convey in-band key distribution or agreement data. For example, DH key exchange, RSA key encryption, etc. Schema Definition: Eastlake, Reagle, Solo [Page 24] Internet Draft XML-Signature Syntax and Processing June 2000 DTD: 4.5 The Object Element Identifier Type="http://www.w3.org/2000/02/xmldsig#Object" (this can be used within a Reference element to identify the referent's type) Object is an optional element that may occur one or more times. When present, this element may contain any data. The Object element may include optional MIME type, ID, and encoding attributes. The MimeType attribute is an optional attribute which describes the data within the Object. This is a string with values defined by [MIME]. For example, if the Object contains XML, the MimeType could be text/xml. This attribute is purely advisory; no validation of the MimeType information is required by this specification. The Object's Id is commonly referenced from a Reference in SignedInfo, or Manifest. This element is typically used for enveloping signatures where the object being signed is to be included in the signature element. The digest is calculated over the entire Object element including start and end tags. Note, if the application wishes to exclude the tags from the digest calculation the Reference must identify the actual data object (easy for XML documents) or a transform must be used to remove the Object tags (likely where the data object is non-XML). Exclusion of the object tags may be desired for cases where one wants the signature to remain valid if the data object is moved from inside a signature to outside the signature (or vice-versa), or where the content of the Object is an encoding of an original binary document and it is desired to extract and decode so as to sign the original bitwise representation. Schema Definition: DTD: Eastlake, Reagle, Solo [Page 25] Internet Draft XML-Signature Syntax and Processing June 2000 5.0 Additional Signature Syntax This section describes the optional to implement Manifest and SignatureProperties elements and describes the handling of XML processing instructions and comments. With respect to the elements Manifest and SignatureProperties this section specifies syntax and little behavior -- it is left to the application. These elements can appear anywhere the parent's content model permits; the Signature content model only permits them within Object. 5.1 The Manifest Element Identifier Type="http://www.w3.org/2000/02/xmldsig#Manifest" (this can be used within a Reference element to identify the referent's type) The Manifest element provides a list of References. The difference from the list in SignedInfo is that it is application defined which, if any, of the digests are actually checked against the objects referenced and what to do if the object is inaccessible or the digest compare fails. If a Manifest is pointed to from SignedInfo, the digest over the Manifest itself will be checked by the core signature validation behavior. The digests within such a Manifest are checked at application discretion. If a Manifest is referenced from another Manifest, even the overall digest of this two level deep Manifest might not be checked. Schema Definition: DTD: 5.2 The SignatureProperties Element Identifier Type="http://www.w3.org/2000/02/xmldsig#SignatureProperty" Eastlake, Reagle, Solo [Page 26] Internet Draft XML-Signature Syntax and Processing June 2000 (this can be used within a Reference element to identify the referent's type) Additional information items concerning the generation of the signature(s) can be placed in a SignatureProperty element (i.e., date/time stamp or the serial number of cryptographic hardware used in signature generation). Schema Definition: DTD: 5.3 Processing Instructions in Signature Elements No XML processing instructions (PIs) are used by this specification. Note that PIs placed inside SignedInfo by an application will be signed unless the CanonicalizationMethod algorithm discards them. (This is true for any signed XML content.) All of the CanonicalizationMethods specified within this specification retain PIs. When a PI is part of content that is signed (e.g., within SignedInfo or referenced XML documents) any change to the PI will obviously result in a signature failure. 5.4 Comments in Signature Elements XML comments are not used by this specification. Note that unless CanonicalizationMethod removes comments within SignedInfo or any other referenced XML, they will be signed. Eastlake, Reagle, Solo [Page 27] Internet Draft XML-Signature Syntax and Processing June 2000 Consequently, a change to the comment will cause a signature failure. Similarly, the XML signature over any XML data will be sensitive to comment changes unless a comment-ignoring canonicalization/transform method, such as the Canonical XML [XML-C14N], is specified. 6.0 Algorithms This section identifies algorithms used with the XML digital signature standard. Entries contain the identifier to be used in Signature elements, a reference to the formal specification, and definitions, where applicable, for the representation of keys and the results of cryptographic operations. 6.1 Algorithm Identifiers and Implementation Requirements Algorithms are identified by URIs that appear as an attribute to the element that identifies the algorithms' role (DigestMethod, Transform, SignatureMethod, or CanonicalizationMethod). All algorithms used herein take parameters but in many cases the parameters are implicit. For example, a SignatureMethod is implicitly given two parameters: the keying info and the output of CanonicalizationMethod. Explicit additional parameters to an algorithm appear as content elements within the algorithm role element. Such parameter elements have a descriptive element name, which is frequently algorithm specific, and MUST be in the XML Signature namespace or an algorithm specific namespace. This specification defines a set of algorithms, their URIs, and requirements for implementation. Requirements are specified over implementation, not over requirements for signature use. Furthermore, the mechanism is extensible, alternative algorithms may be used by signature applications. (Note that the normative identifier is the complete URI in the table though they are frequently abbreviated in XML syntax (e.g., "&dsig;base64").) Algorithm Type Algorithm Requirements Algorithm URI Digest SHA1 REQUIRED http://www.w3.org/2000/02/xmldsig#sha1 Encoding Base64 REQUIRED http://www.w3.org/2000/02/xmldsig#base64 MAC HMAC-SHA1 REQUIRED http://www.w3.org/2000/02/xmldsig#hmac-sha1 Signature DSAwithSHA1 (DSS) REQUIRED http://www.w3.org/2000/02/xmldsig#dsa-sha1 RSAwithSHA1 RECOMMENDED http://www.w3.org/2000/02/xmldsig#rsa-sha1 Canonicalization minimal RECOMMENDED http://www.w3.org/2000/02/xmldsig#minimal XML- Canonicalization REQUIRED http://www.w3.org/TR/1999/WD-xml-c14n-19991115 Eastlake, Reagle, Solo [Page 28] Internet Draft XML-Signature Syntax and Processing June 2000 New XML-Canonicalization RECOMMENDED http://www.w3.org/TR/2000/WD-xml-c14n-20000601 Transform XSLT OPTIONAL http://www.w3.org/TR/1999/REC-xslt-19991116 XPath RECOMMENDED http://www.w3.org/TR/1999/REC-xpath-19991116 Enveloped Signature REQUIRED http://www.w3.org/2000/02/xmldsig#enveloped-signature Implementation Notes: 1. The Enveloped Signature transform removes the Signature element from the calculation of the signature when the signature is within the document that it is being signed. This MAY be implemented via the RECOMMENDED XPath specification specified in 6.6.4: Enveloped Signature Transform; it MUST have the same effect as that specified by the XPath specification. 2. Presently, there are interoperable implementations of the 19991115 draft of the Canonical XML [XML-C14N] specification and that algorithm is used in the examples in this version of the specification. However, further implementation experience will be used to refine the 20000601 version [XML-C14N-a] which will then replace the older version as the MANDATORY canonicalization algorithm. 6.2 Message Digests Only one digest algorithm is defined herein. However, it is expected that one or more additional strong digest algorithms will be developed in connection with the US Advanced Encryption Standard effort. Use of MD5 [MD5] is NOT RECOMMENDED because recent advances in cryptography have cast doubt on its strength. 6.2.1 SHA-1 Identifier: http://www.w3.org/2000/02/xmldsig#sha1 The SHA-1 algorithm [SHA-1] takes no explicit parameters. An example of an SHA-1 DigestAlg element is: A SHA-1 digest is a 160-bit string. The content of the DigestValue element shall be the base64 encoding of this bit string viewed as a 20-octet octet stream. For example, the DigestValue element for the message digest: A9993E36 4706816A BA3E2571 7850C26C 9CD0D89D from Appendix A of the SHA-1 standard would be: qZk+NkcGgWq6PiVxeFDCbJzQ2J0= 6.3 Message Authentication Codes MAC algorithms take two implicit parameters, their keying material determined from KeyInfo and the octet stream output by Eastlake, Reagle, Solo [Page 29] Internet Draft XML-Signature Syntax and Processing June 2000 CanonicalizationMethod. MACs and signature algorithms are syntactically identical but a MAC implies a shared secret key. 6.3.1 HMAC Identifier: http://www.w3.org/2000/02/xmldsig#hmac-sha1 The HMAC algorithm (RFC2104 [HMAC]) takes the truncation length in bits as a parameter; if the parameter is not specified then all the bits of the hash are output. An example of an HMAC SignatureMethod element: 128 The output of the HMAC algorithm is ultimately the output (possibly truncated) of the chosen digest algorithm. This value shall be base64 encoded in the same straightforward fashion as the output of the digest algorithms. Example: the SignatureValue element for the HMAC-SHA1 digest 9294727A 3638BB1C 13F48EF8 158BFC9D from the test vectors in [HMAC] would be kpRyejY4uxwT9I74FYv8nQ== Schema Definition: DTD: 6.4 Signature Algorithms Signature algorithms take two implicit parameters, their keying material determined from KeyInfo and the octet stream output by CanonicalizationMethod. Signature and MAC algorithms are syntactically identical but a signature implies public key cryptography. 6.4.1 DSA Identifier: http://www.w3.org/2000/02/xmldsig#dsa-sha1 The DSA algorithm [DSS] takes no explicit parameters. An example of a DSA SignatureMethod element is: The output of the DSA algorithm consists of a pair of integers usually referred by the pair (r, s). The signature value consists of the base64 encoding of the concatenation of two octet-streams that respectively result from the octet-encoding of the values r and s. Eastlake, Reagle, Solo [Page 30] Internet Draft XML-Signature Syntax and Processing June 2000 Integer to octet-stream conversion must be done according to the I2OSP operation defined in the RFC 2437 [PKCS1] specification with a k parameter equal to 20. For example, the SignatureValue element for a DSA signature (r, s) with values specified in hexadecimal: r = 8BAC1AB6 6410435C B7181F95 B16AB97C 92B341C0 s = 41E2345F 1F56DF24 58F426D1 55B4BA2D B6DCD8C8 from the example in Appendix 5 of the DSS standard would be i6watmQQQ1y3GB+VsWq5fJKzQcBB4jRfH1bfJFj0JtFVtLotttzYyA== DSA key values have the following set of fields: P, Q, G and Y are mandatory when appearing as a key value, J, seed and pgenCounter are optional but SHOULD be present. (The seed and pgenCounter fields MUST appear together or be absent). All parameters are encoded as base64 values. Schema: DTD: 6.4.2 PKCS1 Eastlake, Reagle, Solo [Page 31] Internet Draft XML-Signature Syntax and Processing June 2000 Identifier: http://www.w3.org/2000/02/xmldsig#rsa-sha1 Arbitrary-length integers (e.g. "bignums" such as RSA modulii) are represented in XML as octet strings. The integer value is first converted to a "big endian" bitstring. The bitstring is then padded with leading zero bits so that the total number of bits == 0 mod 8 (so that there are an even number of bytes). If the bitstring contains entire leading bytes that are zero, these are removed (so the high-order byte is always non-zero). This octet string is then Base64 encoded. (The conversion from integer to octet string is equivalent to IEEE P1363's I2OSP [P1363] with minimal length). The expression "RSA algorithm" as used in this draft refers to the RSASSA-PKCS1-v1_5 algorithm described in RFC 2437 [PKCS1]. (Note that support for PKCS1 Version 2 is planned as soon as that standard is finalized). The RSA algorithm takes no explicit parameters. An example of an RSA SignatureMethod element is: The SignatureValue content for an RSA signature shall be the base64 encoding of the octet string. Signatures are interpreted as unsigned integers. A signature MAY contain a pre-pended algorithm object identifier, but the availability of an ASN.1 parser and recognition of OIDs is not required of a signature verifier. F8aupsHjmbIApjAH4AVYjcsmQkXChyjGYleVJe1KLAmmXWww 3PqkDPUMojithbwbVWVJJ0UhdT407nl0fBrohvkunDq8gzfGkjvO+zDJws1HkRtZ vl1IIBLVWf/qgcLJOgid/2A66niC20GwKcJgIp3o1L+6l7LlSKiZ/CkgDO4= RSA key values have two fields: Modulus and Exponent AQAB xA7SEU+e0yQH5rm9kbCDN9o3aPIo7HbP7tX6WOocLZAtNfyxSZDU16ksL6W jubafOqNEpcwR3RdFsT7bCqnXPBe5ELh5u4VEy19MzxkXRgrMvavzyBpVRgBUwUlV 5foK5hhmbktQhyNdy/6LpQRhDUDsTvK+g9Ucj47es9AQJ3U= Schema: DTD: Eastlake, Reagle, Solo [Page 32] Internet Draft XML-Signature Syntax and Processing June 2000 6.5 Canonicalization Algorithms Canonicalization algorithms take one implicit parameter when they appear as a CanonicalizationMethod within the SignedInfo element. 6.5.1 Minimal Canonicalization Identifier: http://www.w3.org/2000/02/xmldsig#minimal An example of a minimal canonicalization element is: The minimal canonicalization algorithm: * converts the character encoding to UTF-8, removing the encoding pseudo-attribute * normalizes line endings as provided by [XML]. (See section 7: XML and Canonicalization and Syntactical Considerations.) 6.5.2 Canonical XML Identifier: http://www.w3.org/TR/1999/WD-xml-c14n-19991115 An example of an XML canonicalization element is: The normative specification of Canonical XML is [XML-C14N]. 6.6 Transform Algorithms A Transform algorithm has a single implicit parameters: an octet stream from the Reference or the output of an earlier Transform. Application developers are strongly encouraged to support all transforms listed in this section as RECOMMENDED unless the application environment has resource constraints that would make such support impractical. Compliance with this recommendation will maximize application interoperability and libraries should be available to enable support of these transforms in applications without extensive development. 6.6.1 Canonicalization Any canonicalization algorithm that can be used for CanonicalizationMethod can be used as a Transform. 6.6.2 Base64 Identifiers: Eastlake, Reagle, Solo [Page 33] Internet Draft XML-Signature Syntax and Processing June 2000 http://www.w3.org/2000/02/xmldsig#base64 The normative specification for base 64 decoding transforms is [MIME]. The base64 Transform element has no content. The input is decoded by the algorithms. This transform is useful if an application needs to sign the raw data associated with the encoded content of an element. 6.6.3 XPath Filtering Identifier: http://www.w3.org/TR/1999/REC-xpath-19991116 The XPath transform output is the result of applying an XPath expression to an input string. The XPath expression appears in a parameter element named XPath. The input string is equivalent to the result of dereferencing the URI attribute of the Reference element containing the XPath transform, then, in sequence, applying all transforms that appear before the XPath transform in the Reference element's Transforms. The primary purpose of this transform is to ensure that only specifically defined changes to the input XML document are permitted after the signature is affixed. The XPath expression can be created such that it includes all elements except those meeting specific criteria. It is the responsibility of the XPath expression author to ensure that all necessary information has been included in the output such that modification of the excluded information does not affect the interpretation of the output in the application context. One simple example of this is the omission of an enveloped signature from a DigestValue calculation. 6.6.3.1 Evaluation Context Initialization The XPath transform establishes the following evaluation context for the XPath expression given in the XPath parameter element: * A context node, initialized to the input XML document's root node. * A context position, initialized to 1. * A context size, initialized to 1. * A library of functions equal to the function set defined in XPath plus a function named this. * A set of variable bindings. No means for initializing these is defined. Thus, the set of variable bindings used when evaluating the XPath expression is empty, and use of a variable reference in the XPath expression results in an error. * The set of namespace declarations in scope for the XPath expression. The additional function this() is defined as follows: Function: node-set this() The this function returns a node-set containing the single node that directly bears the XPath expression. The node could be of any type Eastlake, Reagle, Solo [Page 34] Internet Draft XML-Signature Syntax and Processing June 2000 capable of directly bearing text, especially text and attribute. This expression results in an error if the containing XPath expression does not appear in an XML document. 6.6.3.2 Parsing Requirements for XPath Evaluation An XML processor is used to read the input XML document and produce a parse tree capable of being used as the initial context node for the XPath evaluation, as described in the previous section. If the input is not a well-formed XML document, then the XPath transform must throw an exception. Validating and non-validating XML processors only behave in the same way (e.g. with respect to attribute value normalization and entity reference definition) until an external reference is encountered. If the XPath transform implementation uses a non-validating processor, and it encounters an external reference in the input document, then an exception must be thrown to indicate that the necessary algorithm is unavailable (The XPath transform cannot simply generate incorrect output since many applications distinguish an unverifiable signature from an invalid signature). As a result of reading the input with an XML processor, linefeeds are normalized, attribute values are normalized, CDATA sections are replaced by their content, and entity references are recursively replaced by substitution text. In addition, consecutive characters are grouped into a single text node. The XPath implementation is expected to convert the information in the input XML document and the XPath expression string to the UCS character domain prior to making any comparisons such that the result of evaluating the expression is equivalent regardless of the initial encoding of the input XML document and XPath expression. The namespace prefix of each node appearing in the original document must be preserved by the XML processor used by the XPath transform implementation. This is necessary in order to produce the serialized result. Although a node-set is unordered, based on the expression evaluation requirements of the XPath function library, the document order position of each node must be available, except for the attribute and namespace axes. The XPath transform imposes no order on attribute and namespace nodes during XPath expression evaluation, and expressions based on attribute or namespace node position are not interoperable. The XPath transform does define an order for namespace and attribute nodes during serialization. 6.6.3.3 XPath Transform Serialization Algorithm For the purpose of serialization, the XPath transform imposes a document order on namespace and attribute nodes. An element's namespace and attribute nodes have a document order position greater Eastlake, Reagle, Solo [Page 35] Internet Draft XML-Signature Syntax and Processing June 2000 than the element but less than any child node of the element. Namespace nodes have a lesser document order position than attribute nodes. An element's namespace nodes are sorted lexicographically by local name (the default namespace node, if one exists, has no local name and is therefore lexicographically least). An element's attribute nodes are sorted lexicographically with namespace URI as the primary key and local name as the secondary key (an empty namespace URI is lexicographically least). Lexicographic comparison is based on the UCS codepoint values, which is equivalent to lexical ordering based on UTF-8. A node-set is converted into a string by generating the representative text for each node in the node-set in ascending document order. No node is processed more than once. Note that processing an element node E includes the processing of all members of the node-set for which E is an ancestor. Therefore, directly after the representative text for E is generated, E and all nodes for which E is an ancestor are removed from the node-set (or some logically equivalent operation occurs such that the node-set's next node in document order has not been processed). The method of text generation is dependent on the node type and given in the following list: * Root Node- Nothing (no byte order mark, no XML declaration, no document type declaration). * Element Nodes- An open angle bracket (<), the element QName, the result of processing the namespace axis, the result of processing the attribute axis, a close angle bracket (>), the descendant nodes of the element that are in the node-set (in document order), an open angle bracket, a forward slash (/), the element QName, and a close angle bracket. + Namespace Axis- If the default namespace node is not in the node set (it is always first in document order if it exists), then generate a space followed by xmlns="". Then, generate the representative text for each namespace node that is in the element's namespace axis and in the node-set, except omit the namespace node with local name xml, which defines the xml prefix, if its string value is http://www.w3.org/XML/1998/namespace. + Attribute Axis- Generate the representative text for each node that is in the element's attribute axis and in the node-set. * Namespace and Attribute Nodes- a space, the node's QName, an equals sign, an open double quote, the modified string value, and a close double quote. The string value of the node is modified by replacing all ampersands (&) with &, all double quote characters with ", and all whitespace characters (#x9, #xA, #xD, and #x20) with character references, except for #x20 characters with no preceding #x20. When whitespace characters are replaced, the character references are written in uppercase hexadecimal with no leading zeroes (for example, #xD is represented by the character reference ). * Text Nodes- the string value, except all ampersands are replaced Eastlake, Reagle, Solo [Page 36] Internet Draft XML-Signature Syntax and Processing June 2000 by &, all open angle brackets (<) are replaced by <, and all #xD characters are replaced by . * Processing Instruction Nodes- an open angle bracket, a question mark, the PI target name of the node, a leading space and the modified string value if the string value is not empty, the question mark, and a close angle bracket. The modified string value is the string value except all #xD characters are replaced by . If the string value is empty, then the leading space is not added. * Comment Nodes- the open comment sequence (). The QName of a node is either the local name if the namespace prefix string is empty or the namespace prefix, a colon, then the local name of the element. The namespace prefix used in the QName MUST be the same one which appeared in the input document. 6.6.3.4 XPath Transform Output The result of the XPath expression is a string, boolean, number, or node-set. If the result of the XPath expression is a string, then the string converted to UTF-8 is the output of the XPath transform. If the result is a boolean or number, then the XPath transform output is computed by converting the boolean or number to a string as if by a call to the XPath string() function, then converting to UTF-8. If the result of the XPath expression is a node-set, then the XPath transform result is computed by serializing the node-set with a UTF-8 encoding. As an example, consider creating an enveloped signature (a Signature element that is a descendant of an element being signed). However, the elements within the signature are changing (e.g. the digest value must be put inside the DigestValue and the SignatureValue must be subsequently calculated). One way to prevent these changes from invalidating the digest value in DigestValue is to add an XPath Transform that omits all Signature elements and their descendants. For example, (//. | //@* | //namespace::*)[not(ancestor-or-self::Signature)] Eastlake, Reagle, Solo [Page 37] Internet Draft XML-Signature Syntax and Processing June 2000 ... The subexpression (//. | //@* | //namespace::*) means that all nodes in the entire parse tree starting at the root node are candidates for the result node-set. For each node candidate, the node is included in the resultant node-set if and only if the node test (the boolean expression in the square brackets) evaluates to "true" for that node. The node test returns true for all nodes except nodes that either have or have an ancestor with a tag of Signature. A more elegant solution uses the this function to omit only the Signature containing the XPath Transform, thus allowing enveloped signatures to sign other signatures. In the example above, use the following expression as the content of the XPath element: (//. | //@* | //namespace::*) [ count(ancestor-or-self::Signature | this()/ancestor::Signature[1]) > count(ancestor-or-self::Signature) ] Since the XPath equality operator converts node sets to string values before comparison, we must instead use the XPath union operator (|). For each node of the document, the predicate expression is true if and only if the node-set containing the node and its Signature element ancestors does not include the enveloped Signature element containing the XPath expression (the union does not produce a larger set if the enveloped Signature element is in the node-set given by ancestor-or-self::Signature). It is RECOMMENDED that the XPath be constructed such that the result of this operation is a well-formed XML document. This should be the case if root element of the input resource is included by the XPath (even if a number of its descendant nodes are omitted by the XPath expression). It is also RECOMMENDED that nodes should not be omitted from the input if they affect the interpretation of the output nodes in the application context. The XPath expression author is responsible for this since the XPath expression author knows the application context. 6.6.4 Enveloped Signature Transform Identifier: http://www.w3.org/2000/02/xmldsig#enveloped-signature An enveloped signature transform T removes the whole Signature element containing T from the digest calculation of the Reference element containing T. The entire string of characters used by an XML processor to match the Signature with the XML production element is removed. The output of the transform is equivalent to the output that would result from replacing T with an XPath transform containing the following XPath expression: Eastlake, Reagle, Solo [Page 38] Internet Draft XML-Signature Syntax and Processing June 2000 (//. | //@* | //namespace::*) [ count(ancestor-or-self::Signature | this()/ancestor::Signature[1]) > count(ancestor-or-self::Signature) ] Note that it is not necessary to use an XPath expression evaluator to create this transform. However, this transform MUST produce output in exactly the same manner as the XPath transform's serialization method. 6.6.5 XSLT Transform Identifier: http://www.w3.org/TR/1999/REC-xslt-19991116 The Transform element contains a single parameter child element called XSLT, whose content MUST conform to the XSL Transforms [XSLT] language syntax. The processing rules for the XSLT transform are stated in the XSLT specification [XSLT]. 7.0 XML Canonicalization and Syntax Constraint Considerations Digital signatures only work if the verification calculations are performed on exactly the same bits as the signing calculations. If the surface representation of the signed data can change between signing and verification, then some way to standardize the changeable aspect must be used before signing and verification. For example, even for simple ASCII text there are at least three widely used line ending sequences. If it is possible for signed text to be modified from one line ending convention to another between the time of signing and signature verification, then the line endings need to be canonicalized to a standard form before signing and verification or the signatures will break. XML is subject to surface representation changes and to processing which discards some surface information. For this reason, XML digital signatures have a provision for indicating canonicalization methods in the signature so that a verifier can use the same canonicalization as the signer. Throughout this specification we distinguish between the canonicalization of a Signature data object and other signed XML data objects. It is possible for an isolated XML document to be treated as if it were binary data so that no changes can occur. In that case, the digest of the document will not change and it need not be canonicalized if it is signed and verified as such. However, XML that is read and processed using standard XML parsing and processing techniques is frequently changed such that some of its surface representation information is lost or modified. In particular, this will occur in many cases for the Signature and enclosed SignedInfo elements since they, and possibly an encompassing XML document, will be processed as XML. Eastlake, Reagle, Solo [Page 39] Internet Draft XML-Signature Syntax and Processing June 2000 Similarly, these considerations apply to Manifest, Object, and SignatureProperties elements if those elements have been digested, their DigestValue is to be checked, and they are being processed as XML. The kinds of changes in XML that may need to be canonicalized can be divided into three categories. There are those related to the basic [XML], as described in 7.1 below. There are those related to [DOM], [SAX], or similar processing as described in 7.2 below. And, third, there is the possibility of coded character set conversion, such as between UTF-8 and UTF-16, both of which all [XML] compliant processors are required to support. Any canonicalization algorithm should yield output in a specific fixed coded character set. For both the minimal canonicalization defined in this specification, the W3C Canonical XML [XML-C14N], and the 2000 Canonical XML [XML-C14N-a], that coded character set is UTF-8. Additionally, none of these algorithms provide data type normalization. Applications that normalize data types in varying formats (e.g., (true, false) or (1,0)) may not be able to validate each other's signatures. Neither the minimal canonicalization nor the 2000 Canonical XML [XML-C14N-a] algorithms provide character normalization. We RECOMMEND that signature applications produce XML content in Normalized Form C [NFC] and check that any XML being consumed is in that form as well (if not, signatures may consequently fail to validate). 7.1 XML 1.0, Syntax Constraints, and Canonicalization XML 1.0 [XML] defines an interface where a conformant application reading XML is given certain information from that XML and not other information. In particular, 1. line endings are normalized to the single character #xA by dropping #xD characters if they are immediately followed by a #xA and replacing them with #xA in all other cases, 2. missing attributes declared to have default values are provided to the application as if present with the default value, 3. character references are replaced with the corresponding character, 4. entity references are replaced with the corresponding declared entity, 5. attribute values are normalized by A. replacing character and entity references as above, B. replacing occurrences of #x9, #xA, and #xD with #x20 (space) except that the sequence #xD#xA is replaced by a single space, and C. if the attribute is not declared to be CDATA, stripping all leading and trailing spaces and replacing all interior runs of spaces with a single space. Note that items (2), (4), and (5C) depend on specific schema, DTD, or similar declarations. In the general case, such declarations will not Eastlake, Reagle, Solo [Page 40] Internet Draft XML-Signature Syntax and Processing June 2000 be available to or used by the signature verifier. Thus, to interoperate between different XML implementations, the following syntax contraints MUST be observed when generating any signed material to be processed as XML, including the SignedInfo element: 1. attributes having default values be explicitly present, 2. all entity references (except "amp", "lt", "gt", "apos", and "quot", and character entities not representable in the encoding chosen.' 3. attribute value white space be normalized 7.2 DOM/SAX Processing and Canonicalization In addition to the canonicalization and syntax constraints discussed above, many XML applications use the Document Object Model [DOM] or The Simple API for XML [SAX]. DOM maps XML into a tree structure of nodes and typically assumes it will be used on an entire document with subsequent processing being done on this tree. SAX converts XML into a series of events such as a start tag, content, etc. In either case, many surface characteristics such as the ordering of attributes and insignificant white space within start/end tags is lost. In addition, namespace declarations are mapped over the nodes to which they apply, losing the namespace prefixes in the source text and, in most cases, losing where namespace declarations appeared in the original instance. If an XML Signature is to be produced or verified on a system using the DOM or SAX processing, a canonical method is needed to serialize the relevant part of a DOM tree or sequence of SAX events. XML canonicalization specifications, such as [XML-C14N], are based only on information which is preserved by DOM and SAX. For an XML Signature to be verifiable by an implementation using DOM or SAX, not only must the syntax constraints given in section 7.1 be followed but an appropriate XML canonicalization MUST be specified so that the verifier can re-serialize DOM/SAX mediated input into the same octect stream that was signed. 8.0 Security Considerations The XML Signature specification provides a very flexible digital signature mechanism. Implementors must give consideration to their application threat models and to the following factors. 8.1 Only What is Signed is Secure A requirement of this specification is to permit signatures to "apply to a part or totality of a XML document." (See section 3.1.3 of [XML-Signature-RD].) The Transforms mechanism meets this requirement by permitting one to sign data derived from processing the content of the identified resource. For instance, applications that wish to sign a form, but permit users to enter limited field data without invalidating a previous signature on the form might use XPath [XPath] to exclude those portions the user needs to change. Transforms may be arbitrarily specified and may include canonicalization instructions or Eastlake, Reagle, Solo [Page 41] Internet Draft XML-Signature Syntax and Processing June 2000 even XSLT transformations. Of course, signatures over such a derived document do not secure any information discarded by the Transforms. Furthermore, core validation behavior does not confirm that the signed data was obtained by applying each step of the indicated transforms. (Though it does check that the digest of the resulting content matches that specified in the signature.) For example, some application may be satisfied with verifying an XML signature over a cached copy of already transformed data. Other applications might require that content be freshly dereferenced and transformed. 8.2 Only What is "Seen" Should be Signed If signing is intended to convey the judgment or consent of an automated mechanism or person, then it is normally necessary to secure as exactly as practical the information that was presented to that mechanism or person. Note that this can be accomplished by literally signing what was presented, such as the screen images shown a user. However, this may result in data which is difficult for subsequent software to manipulate. Instead, one can sign the data along with whatever filters, style sheets, client profile or other information that affects its presentation. Also note that the use of Canonical XML [XML-C14N] ensures that all internal entities and XML namespaces are expanded within the content being signed. All entities are replaced with their definitions and the canonical form explicitly represents the namespace that an element would otherwise inherit. Applications that do not canonicalize XML content (especially the SignedInfo element) SHOULD NOT use internal entities and SHOULD represent the namespace explicitly within the content being signed since they can not rely upon canonicalization to do this for them. 8.3 Check the Security Model This standard specifies public key signatures and keyed hash authentication codes. These have substantially different security models. Furthermore, it permits user specified algorithms which may have other models. With public key signatures, any number of parties can hold the public key and verify signatures while only the parties with the private key can create signatures. The number of holders of the private key should be minimized and preferably be one. Confidence by verifiers in the public key they are using and its binding to the entity or capabilities represented by the corresponding private key is an important issue, usually addressed by certificate or online authority systems. Keyed hash authentication codes, based on secret keys, are typically much more efficient in terms of the computational effort required but have the characteristic that all verifiers need to have possession of the same key as the signer. Thus any verifier can forge signatures. Eastlake, Reagle, Solo [Page 42] Internet Draft XML-Signature Syntax and Processing June 2000 This standard permits user provided signature algorithms and keying information designators. Such user provided algorithms may have different security models. For example, methods involving biometrics usually depend on a physical characteristic of the authorized user that can not be changed the way public or secret keys can be and may have other security model differences. 8.4 Algorithms, Key Lengths, Certificates, Etc. The strength of a particular signature depends on all links in the security chain. This includes the signature and digest algorithms used, the strength of the key generation [RANDOM] and the size of the key, the security of key and certificate authentication and distribution mechanisms, certificate chain validation policy, protection of cryptographic processing from hostile observation and tampering, etc. Care must be exercised by validaters in executing the various algorithms that may be specified in an XML signature and in the processing of any "executable content" that might be provided to such algorithms as parameters, such as XSLT transforms. The algorithms specified in this document will usually be implemented via a trusted library but even there perverse parameters might cause unacceptable processing or memory demand. Even more care may be warranted with application defined algorithms. The security of an overall system will also depend on the security and integrity of its operating procedures, its personnel, and on the administrative enforcement of those procedures. All the factors listed in this section are important to the overall security of a system; however, most are beyond the scope of this specification. 9.0 Schema, DTD, Data Model, and Valid Example XML Signature Schema Instance xmldsig-core-schema.xsd XML schema instance based on the Last Call 20000407 Schema/DTD [XML-Schema]. XML Signature DTD xmldsig-core-schema.dtd RDF Data Model xmldsig-datamodel-20000112.gif XML Signature Object Example signature-example.xml A cryptographical invalid XML example that includes foreign content and validates under the schema. (It validates under the DTD when the foreign content is removed or the schema is modified accordingly). Eastlake, Reagle, Solo [Page 43] Internet Draft XML-Signature Syntax and Processing June 2000 XML RSA Signature Valid Example signature-example-rsa.xml An XML Signature example by Petteri Stenius that has generated cryptographic values and validates under the schema. XML DSA Signature Valid Example signature-example-dsa.xml Similar to above but uses DSA. 10.0 Definitions Authentication Code A value generated from the application of a shared key to a message via a cryptographic algorithm such that it has the properties of message authentication (integrity) but not signer authentication Authentication, Message "A signature should identify what is signed, making it impracticable to falsify or alter either the signed matter or the signature without detection." [Digital Signature Guidelines, ABA] Authentication, Signer "A signature should indicate who signed a document, message or record, and should be difficult for another person to produce without authorization." [Digital Signature Guidelines, ABA] Core The syntax and processing defined by this specification, including core validation. We use this term to distinguish other markup, processing, and applications semantics from our own. Data Object (Content/Document) The actual binary/octet data being operated on (transformed, digested, or signed) by an application -- frequently an HTTP entity [HTTP]. Note that the proper noun Object designates a specific XML element. Occasionally we refer to a data object as a document or as a resource's content. The term element content is used to describe the data between XML start and end tags [XML]. The term XML document is used to describe data objects which conform to the XML specification [XML]. Integrity The inability to change a message without also changing the signature value. See message authentication. Object An XML Signature element wherein arbitrary (non-core) data may be placed. An Object element is merely one type of digital data (or document) that can be signed via a Reference. Eastlake, Reagle, Solo [Page 44] Internet Draft XML-Signature Syntax and Processing June 2000 Resource "A resource can be anything that has identity. Familiar examples include an electronic document, an image, a service (e.g., 'today's weather report for Los Angeles'), and a collection of other resources.... The resource is the conceptual mapping to an entity or set of entities, not necessarily the entity which corresponds to that mapping at any particular instance in time. Thus, a resource can remain constant even when its content---the entities to which it currently corresponds---changes over time, provided that the conceptual mapping is not changed in the process." [URI] In order to avoid a collision of the term entity within the URI and XML specifications, we use the term data object, content or document to refer to the actual bits being operated upon. Signature Formally speaking, a value generated from the application of a private key to a message via a cryptographic algorithm such that it has the properties of signer authentication and message authentication (integrity). (However, we sometimes use the term signature generically such that it encompasses Authentication Code values as well, but we are careful to make the distinction when the property of signer authentication is relevant to the exposition.) A signature may be (non-exclusively) described as detached, enveloping, or enveloped. Signature, Detached The signature is over content external to the Signature element, and can be identified via a URI or transform. Consequently, the signature is "detached" from the content it signs. This definition typically applies to separate data objects, but it also includes the instance where the Signature and data object reside within the same XML document but are sibling elements. Signature, Enveloping The signature is over content found within an Object element of the signature itself. The Object(or its content) is identified via a Reference (via a URI fragment idenitifier or transform). Signature, Enveloped The signature is over the XML content that contains the signature as an element. The content provides the root XML document element. Obviously, enveloped signatures must take care not to include their own value in the calculation of the SignatureValue. Transform The processing of a octet stream from source content to derived content. Typical transforms include XML Canonicalization, XPath, and XSLT. Eastlake, Reagle, Solo [Page 45] Internet Draft XML-Signature Syntax and Processing June 2000 Validation, Core The core processing requirements of this specification requiring signature validation and SignedInfo reference validation. Validation, Reference The hash value of the identified and transformed content, specified by Reference, matches its specified DigestValue. Validation, Signature The SignatureValue matches the result of processing SignedInfo with CanonicalizationMethod and SignatureMethod as specified in section 3.2. Validation, Trust/Application The application determines that the semantics associated with a signature are valid. For example, an application may validate the time stamps or the integrity of the signer key -- though this behavior is external to this core specification. 11.0 References ABA Digital Signature Guidelines. http://www.abanet.org/scitech/ec/isc/dsgfree.html Bourret Declaring Elements and Attributes in an XML DTD. Ron Bourret. http://www.informatik.tu-darmstadt.de/DVS1/staff/bourret/xml/xm ldtd.html DOM Document Object Model (DOM) Level 1 Specification. W3C Recommendation. V. Apparao, S. Byrne, M. Champion, S. Isaacs, I. Jacobs, A. Le Hors, G. Nicol, J. Robie, R. Sutor, C. Wilson, L. Wood. October 1998. http://www.w3.org/TR/1998/REC-DOM-Level-1-19981001/ DOMHASH Will be RFC 2803. Digest Values for DOM (DOMHASH). H. Maruyama, K. Tamura, N. Uramoto. April 2000 DSS FIPS PUB 186-1. Digital Signature Standard (DSS). U.S. Department of Commerce/National Institute of Standards and Technology. http://csrc.nist.gov/fips/fips1861.pdf HMAC RFC 2104. HMAC: Keyed-Hashing for Message Authentication. H. Krawczyk, M. Bellare, R. Canetti. February 1997. HTTP Eastlake, Reagle, Solo [Page 46] Internet Draft XML-Signature Syntax and Processing June 2000 RFC 2616. Hypertext Transfer Protocol -- HTTP/1.1. J. Gettys, J. Mogul, H. Frystyk, L. Masinter, P. Leach, T. Berners-Lee. June 1999. KEYWORDS RFC2119 Key words for use in RFCs to Indicate Requirement Levels. S. Bradner. March 1997. MD5 RFC 1321. The MD5 Message-Digest Algorithm. R. Rivest. April 1992. MIME RFC 2045. Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies. N. Freed & N. Borenstein. November 1996. NFC TR15. Unicode Normalization Forms. M. Davis, M. Dürst. Revision 18: November 1999. PGP RFC 2440 OpenPGP Message Format. J. Callas, L. Donnerhacke, H. Finney, R. Thayer. November 1998. RANDOM RFC1750 Randomness Recommendations for Security. D. Eastlake, S. Crocker, J. Schiller. December 1994. RDF RDF Schema W3C Candidate Recommendation. D. Brickley, R.V. Guha. March 2000. http://www.w3.org/TR/2000/CR-rdf-schema-20000327/ RDF Model and Syntax W3C Recommendation. O. Lassila, R. Swick. February 1999. http://www.w3.org/TR/1999/REC-rdf-syntax-19990222/ P1363 IEEE P1363: Standard Specifications for Public Key Cryptography. PKCS1 RFC 2437. PKCS #1: RSA Cryptography Specifications Version 2.0. B. Kaliski, J. Staddon. October 1998. SAX SAX: The Simple API for XML David Megginson et. al. May 1998. http://www.megginson.com/SAX/index.html SHA-1 FIPS PUB 180-1. Secure Hash Standard. U.S. Department of Commerce/National Institute of Standards and Technology. http://csrc.nist.gov/fips/fip180-1.pdf Eastlake, Reagle, Solo [Page 47] Internet Draft XML-Signature Syntax and Processing June 2000 UTF-8 RFC2279. UTF-8, a transformation format of ISO 10646. F. Yergeau. Janaury 1998. URI RFC2396. Uniform Resource Identifiers (URI): Generic Syntax. T. Berners-Lee, R. Fielding, L. Masinter. August 1998 URL RFC1738. Uniform Resource Locators (URL). Berners-Lee, T., Masinter, L., and M. McCahill. December 1994. URN RFC 2141. URN Syntax. R. Moats. May 1997. RFC 2611. URN Namespace Definition Mechanisms. L. Daigle, D. van Gulik, R. Iannella, P. Falstrom. June 1999. XLink XML Linking Language.Working Draft. S. DeRose, D. Orchard, B. Trafford. July 1999. http://www.w3.org/1999/07/WD-xlink-19990726 XML Extensible Markup Language (XML) 1.0 Recommendation. T. Bray, J. Paoli, C. M. Sperberg-McQueen. February 1998. http://www.w3.org/TR/1998/REC-xml-19980210 XML-C14N Canonical XML. Working Draft. T. Bray, J. Clark, J. Tauber. November 1999. http://www.w3.org/TR/1999/WD-xml-c14n-19991115 XML-C14N-a Canonical XML. Working Draft. J. Boyer. June 2000. http://www.w3.org/TR/2000/WD-xml-c14n-20000601 XML-ns Namespaces in XML Recommendation. T. Bray, D. Hollander, A. Layman. Janaury 1999. http://www.w3.org/TR/1999/REC-xml-names-19990114 XPath XML Path Language (XPath)Version 1.0. Proposed Recommendation. J. Clark, S. DeRose. October 1999. http://www.w3.org/TR/1999/PR-xpath-19991008 XPointer XML Pointer Language (XPointer). Working Draft. S. DeRose, R. Daniel. http://www.w3.org/1999/07/WD-xptr-19990709 XML-schema Eastlake, Reagle, Solo [Page 48] Internet Draft XML-Signature Syntax and Processing June 2000 XML Schema Part 1: Structures Working Draft. D. Beech, M. Maloney, N. Mendelshohn. April 2000. http://www.w3.org/TR/2000/WD-xmlschema-1-20000407/ XML Schema Part 2: Datatypes Working Draft. P. Biron, A. Malhotra. April 2000. http://www.w3.org/TR/2000/WD-xmlschema-2-20000407/ XML-Signature-RD Will be RFC 2807. XML Signature Requirements. J. Reagle, April 2000. http://www.w3.org/TR/xmldsig-requirements XSL Extensible Stylesheet Language (XSL) Working Draft. S. Adler, A. Berglund, J. Caruso, S. Deach, P. Grosso, E. Gutentag, A. Milowski, S. Parnell, J. Richman, S. Zilles. March 2000. http://www.w3.org/TR/2000/WD-xsl-20000327/xslspec.html XSLT XSL Transforms (XSLT) Version 1.0. Recommendation. J. Clark. November 1999. http://www.w3.org/TR/1999/REC-xslt-19991116.html WebData Web Architecture: Describing and Exchanging Data. W3C Note. T. Berners-Lee, D. Connolly, R. Swick. June 1999. http://www.w3.org/1999/04/WebData 12. Authors' Address Donald E. Eastlake 3rd Motorola, Mail Stop: M4-10 20 Forbes Boulevard Mansfield, MA 02048 USA Phone: 1-508-261-5434 Email: Donald.Eastlake@motorola.com Joseph M. Reagle Jr., W3C Massachusetts Institute of Technology Laboratory for Computer Science NE43-350, 545 Technology Square Cambridge, MA 02139 Phone: 1.617.258.7621 Email: reagle@w3.org David Solo Citigroup 666 Fifth Ave, 3rd Floor NY, NY 10103 USA Phone: +1-212-830-8118 Email: dsolo@alum.mit.edu Eastlake, Reagle, Solo [Page 49]