This section is informative.
The primary purpose of defining XHTML modules and a general modularization methodology is to ease the development of document types that are based upon XHTML. These document types may extend XHTML by integrating additional capabilities (e.g. [SMIL] or [MathML]), or they may define a subset of XHTML for use in a specialized device. Regardless of the application, XHTML modules are up to the task. This section describes the techniques that document type designers must use in order to take advantage of this modularization architecture. It does this by applying the techniques defined in the previous sections in progressively more complex ways, culminating in the creation of a complete document type from disparate modules.
Note that in no case do these examples require the modification of the XHTML-provided module files themselves. The XHTML module files are completely parameterized, so that it is possible through separate module definitions and driver files to customize the definition and the content model of each element and each element's hierarchy.
Finally, remember that most users of XHTML are not expected to be DTD authors. DTD authors are generally people who are defining specialized markup that will improve the readability, simplify the rendering of a document, or ease machine-processing of documents, or they are client designers that need to define the specialized DTD for their specific client. Consider these cases:
In some cases, an extension to XHTML can be as simple as additional attributes. Attributes can be added to an element just by specifying an additional ATTLIST for the element, for example:
<!ATTLIST a myattr CDATA #IMPLIED >
would add the "myattr" attribute, with a value type of CDATA, to the "a" element. This works because XML permits the extension of the attribute list for an element at any point in a DTD.
Naturally, adding an attribute to a DTD does not mean that any new behavior is defined for arbitrary clients. However, a content developer could use an extra attribute to store information that is accessed by associated scripts via the Document Object Model (for example).
Defining additional elements is only slightly more complicated than defining additional attributes. Basically, DTD authors should write the element declaration for each element:
<!ELEMENT myelement ( #CDATA | myotherelement )* > <!ATTLIST myelement myattribute CDATA #IMPLIED > <!ELEMENT myotherelement EMPTY >
After the elements are defined, they need to be integrated into the content model. Strategies for integrating new elements or sets of elements into the content model are addressed in Defining the content model for a collection of modules below.
Since the content model of XHTML modules is fully parameterized, DTD authors may modify the content model for every element in every module. The details of the DTD module interface are defined in XML DTD Modules. However, basically there are two ways to approach this modification:
The strategy taken will depend upon the nature of the modules being combined and the nature of the elements being integrated. The remainder of this section describes techniques for integrating two different classes of modules.
When a module (and remember, a module can be a collection of other modules) contains elements that only reference each other in their content model, it is said to be "internally complete". As such, the module can be used on its own (for example, you could define a DTD that was just that module, and use one of its elements as the root element). Integrating such a module into XHTML is a three step process:
Consider attaching the elements defined above. In that example, the element myelement is the root. To attach this element under the object element, and only the object element, of XHTML, the following would work:
<!ENTITY % Object.content "( % Flow.mix | param | myelement )*">
A DTD defined with this content model would allow a document like the following fragment:
<object data="..."> <p>The object didn't load!</p> <myelement>This is content of a locally defined element</myelement> </object>
Extending the example above, to attach this module everywhere that the %Flow.mix content model group is permitted, would require something like the following:
<!ENTITY % Misc.class "ins | del | script | noscript | myelement" >
Since the %Misc.class content model class is used throughout the XHTML Modules, the new module would become available throughout an extended XHTML document type.
So far the examples in this section have described the methods of extending XHTML and XHTML's content model. Once this is done, the next step is to collect the modules that comprise the DTD into a single DTD driver, incorporating the new definitions so that they override and augment the basic XHTML definitions as appropriate.
When defining a new DTD, it is essential that each DTD have a
unique identifier to use in the xmlns attribute of the root
element (usually the
html element). This
identifier is often a URI, but in any event is something that
can be used by user agents to differentiate the DTD from
others. This identifier is defined using the
XHTML1.ns parameter entity when creating a DTD that
uses the XHTML1 structure module.
Using the trivial example above, it is possible to define a new DTD that extends the XHTML Transitional DTD pretty easily. The following is a complete, working extended DTD:
<!ENTITY % XHTML1.ns "http://my.company.com/DTDs/example.dtd" > <!ELEMENT myelement ( #PCDATA | myotherelement )* > <!ATTLIST myelement myattribute CDATA #IMPLIED > <!ELEMENT myotherelement EMPTY > <!ENTITY % Misc.class "ins | del | script | noscript | myelement" > <!ENTITY % XHTML1-t.dtd PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/DTDs/XHTML1/XHTML1-t.dtd"> %XHTML1-t.dtd;
Next, there is the situation where a complete, additional, and complex module is added to XHTML (or to a subset of XHTML). In essence, this is the same as in the trivial example above, the only difference being that the module being added is incorporated in the DTD by reference rather than explicitly including the new definitions in the DTD.
One such complex module is the DTD for [MathML]. In order to combine MathML and XHTML into a single DTD, an author would just decide where MathML content should be legal in the document, and add the MathML root element to the content model at that point:
<!ENTITY % XHTML1.ns "http://www.w3.org/DTDs/XHTML1_plus_MathML.dtd" > <!ENTITY % XHTML1-math PUBLIC "-//W3C//MathML 1.0//EN" "http://www.w3.org/DTDs/MathML/MathML1.dtd" > %XHTML1-math; <!ENTITY % Inlspecial.class "a | img | object | map | math" > <!ENTITY % XHTML1-strict PUBLIC "-//W3C//XHTML 1.0 Strict//EN" "http://www.w3.org/DTDs/XHTML/XHTML1-s.dtd" > %XHTML1-strict;
Note that, while this is a valid example, it does not create a working DTD at this time. The reason for this is that the MathML DTD defines two elements (var and select) that conflict directly with XHTML. This conflict needs to be resolved in order for the new DTD to work correctly.
Finally, another way in which DTD authors may use XHTML modules is to define a DTD that is a subset of XHTML (because, for example, they are building devices or software that only supports a subset of XHTML). Doing this is only slightly more complex than the previous example. The basic steps to follow are:
For example, consider a device that supports the Strict XHTML 1.0, but without forms or tables. The DTD for such a device would look like this:
<!ENTITY % XHTML1.ns "http://www.w3.org/DTDs/XHTML1_simple.dtd" > <!ENTITY % XHTML1-form.module "IGNORE" > <!ENTITY % XHTML1-table.module "IGNORE" > <!ENTITY % XHTML1-strict PUBLIC "-//W3C//XHTML 1.0 Strict//EN" "http://www.w3.org/DTDs/XHTML/XHTML1-s.dtd" > %XHTML1-strict;
Note that this does not actually modify the content model for the Strict XHTML 1.0 DTD. However, since XML ignores elements in content models that are not defined, the form and table elements are dropped from the model automatically.
Once a new DTD has been developed, it can be used in any document. Using the DTD is as simple as just referencing it in the DOCTYPE declaration of a document:
<!DOCTYPE html PUBLIC "-//MyOrg//DTD My XHTML Extensions//EN" "http://www.myorg.com/DTDs/myorg.dtd"> <html xmlns="http://www.myorg.com/DTDs/myorg.dtd"> <head> <title>MyOrg Document</title> </head> <body> <p>This is an example document using the new elements: <myelement>A test element <myotherelement /> </myelement> </p> </body> </html>