15 Fonts

Contents

15.2.6 Generic font families serif sans-serif cursive fantasy monospace 15.3 Font selection 15.3.115.1 Introduction

Setting font Descriptionsproperties will be among the most common uses of style sheets. Unfortunately, there exists no well-defined and @font-face 15.3.2 Descriptorsuniversally accepted taxonomy for Selecting a Font: 'font-family' , 'font-style' , 'font-variant' , 'font-weight' , 'font-stretch'classifying fonts, and 'font-size' 15.3.3 Descriptors forterms that apply to one font Data Qualification: 'unicode-range' 15.3.4 Descriptor for Numeric Values: 'units-per-em' 15.3.5 Descriptor for Referencing: 'src' 15.3.6 Descriptors for Matching: 'panose-1' , 'stemv' , 'stemh' , 'slope' , 'cap-height' , 'x-height' , 'ascent' , and 'descent' 15.3.7 Descriptors for Synthesis: 'widths' , 'bbox' and 'definition-src' 15.3.8 Descriptorsfamily may not be appropriate for Alignment: 'baseline' , 'centerline' , 'mathline' , and 'topline' 15.3.9 Examples 15.4 Font Characteristics 15.4.1 Introducing Font Characteristics 15.4.2 Full font name 15.4.3 Coordinate units on the em square 15.4.4 Central Baseline 15.4.5 Font Encoding 15.4.6others. E.g. 'italic' is commonly used to label slanted text, but slanted text may also be labeled as being Oblique, Slanted, Incline, Cursive or Kursiv. Therefore it is not a simple problem to map typical font family name 15.4.7 Glyph widths 15.4.8 Horizontal stem width 15.4.9 Height of uppercase glyphs 15.4.10 Height of lowercase glyphs 15.4.11 Lower Baseline 15.4.12 Mathematical Baseline 15.4.13 Maximal bounding box 15.4.14 Maximum unaccented height 15.4.15 Maximum unaccented depth 15.4.16 Panose-1 number 15.4.17 Range of ISO 10646 characters 15.4.18 Top Baseline 15.4.19 Vertical stem width 15.4.20 Vertical stroke angle 15.5selection properties to a specific font.

15.2 Font matching algorithm

15.5.1 Mapping font weight values to font names 15.5.2 ExamplesBecause there is no accepted, universal taxonomy of font properties, matching 15.1 Introduction When a document's text isof properties to be displayed visually, characters (abstract information elements)font faces must be mapped to abstract glyphs . One or more characters may be depicted by one or more abstract glyphs,done carefully. The properties are matched in a possibly context-dependent fashion. A glyph iswell-defined order to insure that the actual artistic representationresults of an abstract glyph, in some typographic style, inthis matching process are as consistent as possible across UAs (assuming that the formsame library of outlines or bitmaps that may be drawn on the screen or paper. Afont faces is presented to each of them).

  1. The User Agent makes (or accesses) a setdatabase of relevant CSS 2.1 properties of glyphs,all observingthe same basic motif according to design, size, appearance, and other attributes associatedfonts of which the UA is aware. If there are two fonts with exactly the same properties, the entire set, and a mapping from characters to abstract glyphs. A visualuser agent must address the following issues before actually renderingselects one of them.
  2. At a character: Is there, directly or by inheritance,given element and for each character in that element, the UA assembles the font properties applicable to that element. Using the complete set of properties, the UA uses the 'font-family' property to choose a tentative font specifiedfamily. The remaining properties are tested against the family according to the matching criteria described with each property. If there are matches for this character? Doesall the user agent have thisremaining properties, then that is the matching font available?face for the given element.
  3. If so, what glyph(s) does this character or sequence of characters map to?there is no matching font face within the 'font-family' being processed by step 2, and if not, what should be done? Shouldthere is a differentnext alternative 'font-family' in the font be substituted? Canset, then repeat step 2 with the next alternative 'font-family'.
  4. If there is a matching font be synthesized? Canface, but it be retrieved fromdoesn't contain a glyph for the Web? In both CSS1current character, and CSS2, authors specify font characteristics viaif there is a series ofnext alternative 'font-family' in the font properties. Howsets, then repeat step 2 with the user agent handles these properties, whennext alternative 'font-family'.
  5. If there is no matchingfont onwithin the client has expanded between CSS1 and CSS2.family selected in CSS1, all fonts were assumed to be present on the client system2, then use a UA-dependent default 'font-family' and were identified solely by name. Alternate fonts could be specified through the properties, but beyond that, user agents had no way to propose other fonts torepeat step 2, using the user (even stylistically similar fontsbest match that can be obtained within the user agent had available) other than genericdefault fonts. CSS2 changes all that, and allows much greater liberty for: style sheet authors, to describe the fonts they want to be used user agents, in selectingfont. If a font when an author's requested font is not immediately available. CSS2 improves client-side font matching, enables font synthesis and progressive rendering, and enables fonts toparticular character cannot be downloaded over the Web. These enhanced capabilities are referred to as 'WebFonts' In the CSS2 font model, as in CSS1, each user agent has a "font database" at its disposition. CSS1 referred todisplayed using this database but gave no details about what was in it. CSS2 defines the information in that database and allows style sheet authors to contribute to it. When asked to display a character with a particularfont, then the user agent first identifies theUA has no suitable font in the databasefor that "best fits" the specified font (according tocharacter. The font matching algorithm) OnceUA should map each character for which it has identifiedno suitable font to a font, it retrievesvisible symbol chosen by the font data locally orUA, preferably a "missing character" glyph from the Web, and may display the character using those glyphs. In lightone of this model, we have organized the specification into two sections. The first concernsthe font specification mechanism , whereby authors specify which fonts they would likefaces available to have used.the second concernsUA.

(The above algorithm can be optimized to avoid having to revisit the font selection mechanism , wherebyCSS 2.1 properties for each character.)

The client's user agent identifies and loadsper-property matching rules from (2) above are as follows:

  1. 'font-style' is tried first. 'italic' will be satisfied if there is either a font that best fits the author's specification. How the user agent constructsface in the UA's font database lies outsidelabeled with the scope of this specification since the database's implementation depends on such factors as the operating system, the windowing system, andCSS keyword 'italic' (preferred) or 'oblique'. Otherwise the client. 15.2values must be matched exactly or font-style will fail.
  2. 'font-variant' is tried next. 'small-caps' matches (1) a font specification The first phase of the CSSlabeled as 'small-caps', (2) a font mechanism concerns how style sheet authors specifyin which fonts should be used by a user agent. At first, it seem thatthe obvious way to specifysmall caps are synthesized, or (3) a font iswhere all lowercase letters are replaced by it's name,upper case letters. A single string - which appears to be separated into distinct parts; for example "BT Swiss 721 Heavy Italic" . Unfortunately, there exists no well-defined and universally accepted taxonomy for classifying fonts based on their names, and terms that apply to onesmall-caps font family name may not be appropriate for others. For example, the term 'italic' is commonly used to label slanted text, but slanted textmay alsobe labeled Oblique, Slanted, Incline, Cursive , or Kursiv . Similarly, font names typically contain terms that describe the "weight" ofsynthesized by electronically scaling uppercase letters from a normal font. The primary role of these names is to distinguish faces of differing darkness within'normal' matches a font's normal (non-small-caps) variant. A singlefont family. There is no accepted, universal meaningcannot fail to these weight names and usage varies widely. For examplehave a normal variant. A font that you might think ofis only available as being bold mightsmall-caps shall be describedselectable as being Regular, Roman, Book, Medium, Semi- or Demi-Bold, Bold, or Black, depending on how black the "normal" face of the font is within the design. This lack of systematic naming makes it impossible, in the general case, to generateeither a modified font'normal' face name that differs inor a particular way, such as being bolder. Because of this, CSS uses'small-caps' face.
  3. 'font-weight' is matched next, it will never fail. (See 'font-weight' below.)
  4. 'font-size' must be matched within a different model .UA-dependent margin of tolerance. (Typically, sizes for scalable fonts are requested not through a single font name but through setting a series of font properties. These property values formrounded to the basis ofnearest whole pixel, while the user agent's font selection mechanism.tolerance for bitmapped fonts could be as large as 20%.) Further computations, e.g. by 'em' values in other properties, are based on the computed value of 'font-size'.

15.3 Font properties can be individually modified, for example to increasefamily: the boldness, and'font-family' property

'font-family'
Value:  [[ <family-name> | <generic-family> ] [, <family-name>| <generic-family>]* ] | inherit
Initial:  depends on user agent
Applies to:  all elements
Inherited:  yes
Percentages:  N/A
Media:  visual
Computed value:  as specified

The new setvalue is a prioritized list of font propertyfamily names and/or generic family names. Unlike most other CSS properties, values will then be usedare separated by a comma to select from the font database again.indicate that they are alternatives:

body { font-family: Gill, Helvetica, sans-serif }

Although many fonts provide the result is"missing character" glyph, typically an increase in regularityopen box, as its name implies this should not be considered a match for style sheet authors and implementors, and an increasecharacters that cannot be found in robustness. 15.2.1 Font specification properties CSS2 specifies fonts according to these characteristics: Font familythe font. (It should, however, be considered a match for U+FFFD, the "missing character" character's code point).

There are two types of font family specifies which font family is to be used to rendernames:

<family-name>
The text.name of a font family is a groupof fonts,designed to be usedchoice. In combinationthe last example, "Gill" and exhibiting similarities"Helvetica" are font families.
<generic-family>
In design. One member ofthe example above, the last value is a generic family may be italic, another bold, another condensed or using small caps.name. The following generic families are defined:

Style sheet designers are encouraged to offer a generic font family names include "Helvetica", "New Century Schoolbook", and "Kyokasho ICA L".as a last alternative. Generic font family names are keywords and must NOT restricted to Latin characters.be quoted.

If an unquoted font families mayfamily name contains parentheses, brackets, and/or braces, they must still be grouped into different categories: those witheither balanced or without serifs, those whoseescaped per CSS grammar rules. Similarly, quote marks, semicolons, exclamation marks and commas within unquoted font family names must be escaped. Font names containing any such characters areor are not proportionally spaced, those that resemble handwriting, those that are fantasy fonts, etc. Font stylewhitespace should be quoted:

body { font-family: "New Century Schoolbook", serif }
  
<BODY STYLE="font-family: 'My own font', fantasy">

If quoting is omitted, any whitespace characters before and after the font style specifies whethername are ignored and any sequence of whitespace characters inside the textfont name is converted to be rendered using a normal, italic, or oblique face. Italic isa more cursive companion facesingle space. Font family names that happen to be the normal face, but not so cursivesame as to make it a script face. Oblique isa slanted form of the normal face,keyword value (e.g. 'initial', 'inherit', 'default', 'serif', 'sans-serif', 'monospace', 'fantasy', and is more commonly used as a companion face to sans-serif. This definition avoids having'cursive') must be quoted to label slightly slanted normal faces as oblique, or normal Greek facesprevent confusion with the keywords with the same names. UAs must not consider these keywords as italic. Font variantmatching the '<family-name>' type.

15.4 Font variant indicates whether the text is to be rendered usingstyling: the 'font-style' property

'font-style'
Value:  normal glyphs for lowercase characters or using small-caps glyphs for lowercase characters. A particular font may contain only normal, only small-caps, or both types of glyph; this property is used to request an appropriate font and, if the font contains both variants, the appropriate glyphs. Font weight The font weight refers to the boldness or lightness of the glyphs used to render the text, relative to other fonts in the same font family. Font stretch The font stretch indicates the desired amount of condensing or expansion in the glyphs used to render the text, relative to other fonts in the same font family. Font size The font size refers to the size of the font from baseline to baseline, when set solid (in CSS terms, this is when the 'font-size' and 'line-height' properties have the same value). On all properties except 'font-size' , 'em' and 'ex' length values refer to the font size of the current element. For 'font-size' , these length units refer to the font size of the parent element. Please consult the section on length units for more information. The CSS font properties are used to describe the desired appearance of text in the document. The font descriptors, in contrast, are used to describe the characteristics of fonts, so that a suitable font can be chosen to create the desired appearance. For information about the classification of fonts, please consult the section on font descriptors . 15.2.2 Font family : the 'font-family' property 'font-family' Value:    [[ <family-name>| <generic-family> ],]* [ <family-name>italic | <generic-family> ]oblique | inherit
Initial:   depends on user agentnormal
Applies to:  all elements
Inherited:  yes
Percentages:  N/A
Media:  visual
ThisComputed value:  as specified

The 'font-style' property specifiesselects between normal (sometimes referred to as "roman" or "upright"), italic and oblique faces within a prioritized listfont family.

A value of 'normal' selects a font family names and/or generic family names. To deal with the problemthat is classified as 'normal' in the UA's font database, while 'oblique' selects a singlefont may not contain glyphs to display all the characters in a document, orthat not all fonts are available on all systems, this property allows authors to specifyis labeled 'oblique'. A list of fonts, allvalue of the same style and size, that are tried in sequence to see if they contain a glyph for a certain character. This list is called'italic' selects a font set . Example(s): For example, textthat contains English words mixed with mathematical symbols may need a font set of two fonts,is labeled 'italic', or, if that is not available, one containing Latin letters and digits,labeled 'oblique'.

The other containing mathematical symbols. Here is an example of afont set suitable for a textthat is expected to contain text with Latin characters, Japanese characters, and mathematical symbols: BODY { font-family: Baskerville, "Heisi Mincho W3", Symbol, serif } The glyphs availablelabeled 'oblique' in the "Baskerville" font (aUA's font that covers only Latin characters)database may actually have been generated by electronically slanting a normal font.

Fonts with Oblique, Slanted or Incline in their names will typically be taken from that font, Japanese glyphslabeled 'oblique' in the UA's font database. Fonts with Italic, Cursive or Kursiv in their names will typically be taken from "Heisi Mincho W3", andlabeled 'italic'.

h1, h2, h3 { font-style: italic }
h1 em { font-style: normal }

In the mathematical symbol glyphs will come from "Symbol". Any othersexample above, emphasized text within 'H1' will come from the generic font family 'serif'.appear in a normal face.

15.5 Small-caps: the generic'font-variant' property

'font-variant'
Value:  normal | small-caps | inherit
Initial:  normal
Applies to:  all elements
Inherited:  yes
Percentages:  N/A
Media:  visual
Computed value:  as specified

Another type of variation within a font family will be used if one or more ofis the other fontssmall-caps. In a small-caps font set is unavailable. Although many fonts providethe "missing character" glyph, typically an open box, as its name implies this should not be considered a match except forlower case letters look similar to the last fontuppercase ones, but in a font set. There are two types of font family names: <family-name>smaller size and with slightly different proportions. The name'font-variant' property selects that font.

A value of 'normal' selects a font family of choice.that is not a small-caps font, 'small-caps' selects a small-caps font. It is acceptable (but not required) in the previous example, "Baskerville", "Heisi Mincho W3", and "Symbol" are font families. Font family names containing whitespace should be quoted.CSS 2.1 if quoting is omitted, any whitespace characters before and after the font name are ignored and any sequence of whitespace characters insidethe small-caps font nameis converted toa single space. <generic-family> The following generic families are defined: 'serif', 'sans-serif', 'cursive', 'fantasy', and 'monospace'. Please see the section on generic font families for descriptions of these families. Generic font family names are keywords, and therefore must not be quoted. Authors are encouraged to offercreated by taking a genericnormal font familyand replacing the lower case letters by scaled uppercase characters. As a last alternative, for improved robustness. For example: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN"> <HTML> <HEAD> <TITLE>Font test</TITLE> <STYLE type="text/css"> BODY { font-family: "new century schoolbook", serif } </STYLE> </HEAD> <BODY> <H1 style="font-family: 'My own font', fantasy">Test</H1> <P>What's up, Doc? </BODY> </HTML> Example(s): The richer selector syntax of CSS2 mayresort, uppercase letters will be used to create language-sensitive typography.as replacement for example, some Chinese and Japanese characters are unified to have the same Unicode codepoint, although the abstract glyphs are nota small-caps font.

The samefollowing example results in the two languages. *:lang(ja-jp)an 'H3' element in small-caps, with any emphasized words in oblique, and any emphasized words within an 'H3' oblique small-caps:

h3 {  font: 900 14pt/16pt "Heisei Mincho W9", seriffont-variant: small-caps }
 *:lang(zh-tw)em {  font: 800 14pt/16.5pt "Li Sung", seriffont-style: oblique }

This selects any element that hasThere may be other variants in the given language - Japanesefont family as well, such as fonts with old-style numerals, small-caps numerals, condensed or Traditional Chinese - and requestsexpanded letters, etc. CSS 2.1 has no properties that select those.

Note: insofar as this property causes text to be transformed to uppercase, the appropriate font. 15.2.3same considerations as for 'text-transform' apply.

15.6 Font stylingboldness: the 'font-style' , 'font-variant' ,'font-weight' and 'font-stretch' properties 'font-style'property

'font-weight'
Value:  normal | italicbold | obliquebolder | lighter | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | inherit
Initial:  normal
Applies to:  all elements
Inherited:  yes
Percentages:  N/A
Media:  visual
Computed value:  see text

The 'font-style''font-weight' property requests normal (sometimes referred to as "roman" or "upright"), italic, and oblique faces within a font family. Values haveselects the following meanings: normal Specifiesweight of the font. The values '100' to '900' form an ordered sequence, where each number indicates a fontweight that is classifiedat least as 'normal' indark as its predecessor. The UA'skeyword 'normal' is synonymous with '400', and 'bold' is synonymous with '700'. Keywords other than 'normal' and 'bold' have been shown to be often confused with font database. oblique Specifiesnames and a numerical scale was therefore chosen for the 9-value list.

p { font-weight: normal }   /* 400 */
h1 { font-weight: 700 }     /* bold */

The 'bolder' and 'lighter' values select font weights that is classified as 'oblique' inare relative to the UA's font database.weight inherited from the parent:

strong { font-weight: bolder }

Child elements inherit the resultant weight, not the keyword value.

Fonts with Oblique, Slanted,(the font data) typically have one or Incline in theirmore properties whose values are names will typically be labeled 'oblique' inthat are descriptive of the font database."weight" of a font thatfont. There is labeled 'oblique' in the UA's font database may actually have been generated by electronically slantingno accepted, universal meaning to these weight names. Their primary role is to distinguish faces of differing darkness within a normal font. italic Specifiessingle font family. Usage across font families is quite variant; for example, a font that is classifiedone might think of as 'italic' inbeing bold might be described as being Regular, Roman, Book, Medium, Semi- or DemiBold, Bold, or Black, depending on how black the "normal" face of the UA'sfont database, or, if thatis not available, one labeled 'oblique'. Fonts with Italic, Cursive , or Kursivwithin the design. Because there is no standard usage of names, the weight property values in their namesCSS 2.1 are given on a numerical scale in which the value '400' (or 'normal') corresponds to the "normal" text face for that family. The weight name associated with that face will typically be labeled 'italic'. Example(s): In this example,Book, Regular, Roman, Normal text in an H1, H2,or H3 element will be displayed with an italic font. However, emphasized text (EM)sometimes Medium.

The association of other weights within an H1 will appear in a normal face. H1, H2, H3 { font-style: italic } H1 EM { font-style: normal } 'font-variant' Value:    normal | small-caps | inherit Initial:    normal Applies to:    all elements Inherited:    yes Percentages:    N/A Media:    visual Ina small-caps font,family to the glyphs for lowercase letters look similarnumerical weight values is intended only to preserve the uppercase ones, but in a smaller size and with slightly different proportions.ordering of darkness within that family. However, the 'font-variant' property requests such a font for bicameral (having two cases, as with Latin script). This property has no visible effect for scripts that are unicameral (having only one case, as with most offollowing heuristics tell how the world's writing systems). Values haveassignment is done in typical cases:

The inherited value was '900',following two examples show typical mappings.

Assume four weights in which case the resulting weight is also '900'. lighter Specifiesthe next weight that is assigned"Rattlesnake" family, from lightest to a font that is lighter thandarkest: Regular, Medium, Bold, Heavy.

First example of font-weight mapping
Available faces Assignments Filling the inherited one. If there is no such weight, it simply resultsholes
"Rattlesnake Regular" 400 100, 200, 300
"Rattlesnake Medium" 500  
"Rattlesnake Bold" 700 600
"Rattlesnake Heavy" 800 900

Assume six weights in the next lighter numerical value (and the font remains unchanged), unless"Ice Prawn" family: Book, Medium, Bold, Heavy, Black, ExtraBlack. Note that in this instance the inheriteduser agent has decided not to assign a numeric value was '100', in which caseto "Ice Prawn ExtraBlack".

Second example of font-weight mapping
Available faces Assignments Filling the resulting weight is also '100'. Example(s): P { font-weight: normal } /* 400 */ H1 { font-weight: 700 } /* bold */ BODY { font-weight:holes
"Ice Prawn Book" 400 } STRONG { font-weight: bolder } /*100, 200, 300
"Ice Prawn Medium" 500 if available */ Child elements inherit 
"Ice Prawn Bold" 700 600
"Ice Prawn Heavy" 800  
"Ice Prawn Black" 900  
"Ice Prawn ExtraBlack" (none)  

Since the computed valueintent of the weight. 'font-stretch' Value:    normal | wider | narrower | ultra-condensed | extra-condensed | condensed | semi-condensed | semi-expanded | expanded | extra-expanded | ultra-expanded | inherit Initial:    normal Applies to:    all elements Inherited:    yes Percentages:    N/A Media:    visual The 'font-stretch' property selects a normal, condensed,relative keywords 'bolder' and 'lighter' is to darken or extendedlighten the face fromwithin the family and because a font family. Absolute keyword valuesfamily may not have faces aligned with all the following ordering, from narrowestsymbolic weight values, the matching of 'bolder' is to widest : ultra-condensed extra-condensed condensed semi-condensed normal semi-expanded expanded extra-expanded ultra-expandedthe relative keyword 'wider' setsnext darker face available on the valueclient within the family and the matching of 'lighter' is to the next expanded value abovelighter face within the inherited value (while not increasing it above 'ultra-expanded');family. To be precise, the meaning of the relative keyword 'narrower' setskeywords 'bolder' and 'lighter' is as follows:

There is no guarantee that there will be a darker face for each of the 'font-weight' values; for example, some fonts may have only a normal and a bold face, while others may have eight face weights. There is no guarantee on how a UA will map font faces within a family to weight values. The only guarantee is that a face of a given value will be no less dark than the faces of lighter values.

The computed value of "font-weight" is either:

CSS 2.1 does not specify how the computed value of font-weight is represented internally or externally.

15.7 Font size: the 'font-size' property

'font-size'
Value:  <absolute-size> | <relative-size> | <length> | <percentage> | inherit
Initial:  medium
Applies to:  all elements
Inherited:   yes, the computed value is inheritedyes
Percentages:  refer to parent element's font size
Media:  visual
This property describesComputed value:  absolute length

The font size ofcorresponds to the font when set solid.em square, a concept used in typography. Note that certain glyphs may bleed outside their em squares. Values have the following meanings:

<absolute-size>
An <absolute-size> keyword refers tois an entry inindex to a table of font sizes computed and kept by the user agent.UA. Possible values are:

[ xx-small | x-small | small | medium | large | x-large | xx-large ]

On a computer screen aThe following table provides user agent guidelines for the absolute-size scaling factor of 1.2 is suggested between adjacent indexes; ifand their mapping to HTML heading and absolute font-sizes. The 'medium' fontvalue is 12pt,used as the 'large' font could be 14.4pt. Different media may need different scaling factors. Also,reference middle value. The user agent should take the quality and availability ofmay fine tune these values for different fonts or different types of display devices.

CSS absolute-size values xx-small x-small small medium large x-large xx-large  
scaling factor 3/5 3/4 8/9 1 6/5 3/2 2/1 3/1
HTML headings h6   h5 h4 h3 h2 h1  
HTML font sizes 1   2 3 4 5 6 7

Different media may need different scaling factors. Also, the UA should take the quality and availability of fonts into account when computing the table. The table may be different from one font family to another.

Note.Note 1. To preserve readability, a UA applying these guidelines should nevertheless avoid creating font-size resulting in less than 9 pixels per EM unit on a computer display.

Note 2. In CSS1, the suggested scaling factor between adjacent indexes was 1.5 which user experience proved to be too large. In CSS2, the suggested scaling factor for computer screen between adjacent indexes was 1.2 which still created issues for the small sizes. The new scaling factor varies between each index to provide better readability.

<relative-size>
A <relative-size> keyword is interpreted relative to the table of font sizes and the font size of the parent element. Possible values are: [ larger | smaller ]]. For example, if the parent element has a font size of 'medium', a value of 'larger' will make the font size of the current element be 'large'. If the parent element's size is not close to a table entry, the user agentUA is free to interpolate between table entries or round off to the closest one. The user agentUA may have to extrapolate table values if the numerical value goes beyond the keywords.

<length> ALength value specifies an absoluteand percentage values should not take the font size (that is independent oftable into account when calculating the user agent'sfont table).size of the element.

Negative lengthsvalues are illegal. <percentage> A percentage value specifies an absolute font size relativenot allowed.

On all other properties, 'em' and 'ex' length values refer to the parent element'scomputed font size. Usesize of percentage values, or values in 'em's, leadsthe current element. On the 'font-size' property, these length units refer to more robust and cascadable style sheets.the actual valuecomputed font size of this property may differ fromthe computed value due a numerical valueparent element.

Note that an application may reinterpret an explicit size, depending on 'font-size-adjust' andthe unavailability of certaincontext. E.g., inside a VR scene a font sizes. Child elements inherit the computed 'font-size' value (otherwise, the effectmay get a different size because of 'font-size-adjust' would compound). Example(s):perspective distortion.

Examples:

p { font-size: 16px; }
@media print {
	p { font-size: 12pt; }
}
blockquote { font-size: larger }
em { font-size: 150% }
em { font-size: 1.5em }

'font-size-adjust'15.8 Shorthand font property: the 'font' property

'font'
Value:   <number> | none | inherit Initial:    none Applies to:   [ [ <'font-style'> || <'font-variant'> || <'font-weight'> ]? <'font-size'> [ / <'line-height'> ]? <'font-family'> ] | caption | icon | menu | message-box | small-caption | status-bar | inherit
Initial:  see individual properties
Applies to:  all elements
Inherited:  yes
Percentages:   N/Asee individual properties
Media:  visual
In bicameral scripts,Computed value:  see individual properties

The subjective apparent size and legibility of'font' property is, except as described below, a font are less dependent on theirshorthand property for setting 'font-style', 'font-variant', 'font-weight', 'font-size' value than on the value of their 'x-height', or, more usefully, on the ratio of these two values, called the aspect value (font size divided by x-height). The higher'line-height' and 'font-family' at the aspect value,same place in the more likely it is that a font at smaller sizes will be legible. Inversely, faces with a lower aspect value will become illegible more rapidly below a given threshold size than faces with a higher aspect value. Straightforward font substitution that relies on font size alone may lead to illegible characters. For example,style sheet. The popular font Verdana has an aspect value of 0.58; when Verdana's font size 100 units, its x-height is 58 units. For comparison, Times New Roman has an aspect valuesyntax of 0.46. Verdana will therefore tend to remain legible at smaller sizes than Times New Roman. Conversely, Verdana will often look 'too big' if substituted for Times New Roman at a chosen size.this property allows authorsis based on a traditional typographical shorthand notation to specify an aspect value for an element that will preserve the x-height of theset multiple properties related to fonts.

All font-related properties are first choice fontreset to their initial values, including those listed in the substitute font.preceding paragraph. Then, those properties that are given explicit values have the following meanings: none Do not preserve the font's x-height. <number> Specifies the aspect value.in the number refers'font' shorthand are set to the aspect value of the first choice font. The scaling factor for available fonts is computed according to the following formula: y(a/a') = c where: y = 'font-size' of first-choice font a' = aspect value of available font c = 'font-size' to apply to available font Example(s): For example, if 14px Verdana (with an aspect value of 0.58) was unavailable and an available font had an aspect value of 0.46, the font-size of the substitute would be 14 * (0.58/0.46) = 17.65px. Font size adjustments take place when computing the actual value of 'font-size' . Since inheritance is based on the computed value , child elements will inherit unadjusted values. The first image below shows several typefaces rasterized at a common font size (11pt. at 72 ppi), together with their aspect values. Note that faces with higher aspect values appear larger than those with lower. Faces with very low aspect values are illegible at the size shown. The next image shows the results of 'font-size-adjust' where Verdana has been taken as the"first choice", together with the scaling factor applied. As adjusted, the apparent sizes are nearly linear across faces, though the actual (em) sizes vary by more than 100%. Note that 'font-size-adjust' tends to stabilize the horizontal metrics of lines, as well. 15.2.5 Shorthand font property : the 'font' property 'font' Value:    [ [ <'font-style'> || <'font-variant'> || <'font-weight'> ]? <'font-size'> [ / <'line-height'> ]? <'font-family'> ] | caption | icon | menu | message-box | small-caption | status-bar | inherit Initial:    see individual properties Applies to:    all elements Inherited:    yes Percentages:    allowed on 'font-size' and 'line-height' Media:    visual The 'font' property is, except as described below , a shorthand property for setting 'font-style' , 'font-variant' , 'font-weight' , 'font-size' , 'line-height' , and 'font-family' , at the same place in the style sheet. The syntax of this property is based on a traditional typographical shorthand notation to set multiple properties related to fonts. All font-related properties are first reset to their initial values, including those listed in the preceding paragraph plus 'font-stretch' and 'font-size-adjust' . Then, those properties that are given explicit values in the 'font' shorthand are set to those values. For a definitionthose values. For a definition of allowed and initial values, see the previously defined properties.

 For reasons of backwards compatibility, it is not possible to set 'font-stretch' and 'font-size-adjust' to other than their initial values using the 'font' shorthand property; instead, set the individual properties. Example(s):p { font:  12pt/14pt12px/14px sans-serif }
p { font: 80% sans-serif }
p { font: x-large/110% "New Century Schoolbook", serif }
p { font: bold italic large Palatino, serif }
p { font: normal small-caps  120%/120% fantasy } P { font: oblique 12pt "Helvetica Nue", serif; font-stretch: condensed } In the second rule, the font size percentage value ('80%') refers to the font size of the parent element. In the third rule, the line height percentage ('110%') refers to the font size of the element itself. The first three rules do not specify the 'font-variant' and 'font-weight' explicitly, so these properties receive their initial values ('normal'). Notice that the font family name "new century schoolbook", which contains spaces, is enclosed in quotes. The fourth rule sets the 'font-weight' to 'bold', the 'font-style' to 'italic', and implicitly sets 'font-variant' to 'normal'. The fifth rule sets the 'font-variant' ('small-caps'), the 'font-size' (120% of the parent's font size), the 'line-height' (120% of the font size) and the 'font-family' ('fantasy'). It follows that the keyword 'normal' applies to the two remaining properties: 'font-style' and 'font-weight' . The sixth rule sets the 'font-style' , 'font-size' , and 'font-family' , the other font properties being set to their initial values. It then sets 'font-stretch' to 'condensed' since that property cannot be set to that value using the 'font' shorthand property. The following values refer to system fonts : caption The font used for captioned controls (e.g., buttons, drop-downs, etc.). icon The font used to label icons. menu The font used in menus (e.g., dropdown menus and menu lists). message-box The font used in dialog boxes. small-caption The font used for labeling small controls. status-bar The font used in window status bars. System fonts may only be set as a whole; that is, the font family, size, weight, style, etc. are all set at the same time.These values may then be altered individually if desired. If no font with the indicated characteristics exists on a given platform, the user agent should either intelligently substitute (e.g., a smaller version of the 'caption' font might be used for the 'smallcaption' font), or substitute a user agent default font. As for regular fonts, if, for a system font, any of the individual properties are not part of the operating system's available user preferences, those properties should be set to their initial values. That is why this property is "almost" a shorthand property: system fonts can only be specified with this property, not with 'font-family' itself, so 'font' allows authors to do more than the sum of its subproperties. However, the individual properties such as 'font-weight' are still given values taken from the system font, which can be independently varied. Example(s): BUTTON { font: 300 italic 1.3em/1.7em "FB Armada", sans-serif } BUTTON P { font: menu } BUTTON P EM { font-weight: bolder } If the font used for dropdown menus on a particular system happened to be, for example, 9-point Charcoal, with a weight of 600, then P elements that were descendants of BUTTON would be displayed as if this rule were in effect: BUTTON P { font: 600 9pt Charcoal } Because the 'font' shorthand resets to its initial value any property not explicitly given a value, this has the same effect as this declaration: BUTTON P { font-style: normal; font-variant: normal; font-weight: 600; font-size: 9pt; line-height: normal; font-family: Charcoal } 15.2.6 Generic font families Generic font families are a fallback mechanism, a means of preserving some of the style sheet author's intent in the worst case when none of the specified fonts can be selected. For optimum typographic control, particular named fonts should be used in style sheets. All five generic font families are defined to exist in all CSS implementations (they need not necessarily map to five distinct actual fonts). User agents should provide reasonable default choices for the generic font families, which express the characteristics of each family as well as possible within the limits allowed by the underlying technology. User agents are encouraged to allow users to select alternative choices for the generic fonts. serif Glyphs of serif fonts, as the term is used in CSS, have finishing strokes, flared or tapering ends, or have actual serifed endings (including slab serifs). Serif fonts are typically proportionately-spaced. They often display a greater variation between thick and thin strokes than fonts from the 'sans-serif' generic font family. CSS uses the term 'serif' to apply to a font for any script, although other names may be more familiar for particular scripts, such as Mincho (Japanese), Sung or Song (Chinese), Totum or Kodig (Korean). Any font that is so described may be used to represent the generic 'serif' family. Examples of fonts that fit this description include: Latin fonts Times New Roman, Bodoni, Garamond, Minion Web, ITC Stone Serif, MS Georgia, Bitstream Cyberbit Greek fonts Bitstream Cyberbit Cyrillic fonts Adobe Minion Cyrillic, Excelcior Cyrillic Upright, Monotype Albion 70, Bitstream Cyberbit, ER Bukinst Hebrew fonts New Peninim, Raanana, Bitstream Cyberbit Japanese fonts Ryumin Light-KL, Kyokasho ICA, Futo Min A101 Arabic fonts Bitstream Cyberbit Cherokee fonts Lo Cicero Cherokee sans-serif Glyphs in sans-serif fonts, as the term is used in CSS, have stroke endings that are plain -- without any flaring, cross stroke, or other ornamentation. Sans-serif fonts are typically proportionately-spaced. They often have little variation between thick and thin strokes, compared to fonts from the 'serif' family. CSS uses the term 'sans-serif' to apply to a font for any script, although other names may be more familiar for particular scripts, such as Gothic (Japanese), Kai (Chinese), or Pathang (Korean). Any font that is so described may be used to represent the generic 'sans-serif' family. Examples of fonts that fit this description include: Latin fonts MS Trebuchet, ITC Avant Garde Gothic, MS Arial, MS Verdana, Univers, Futura, ITC Stone Sans, Gill Sans, Akzidenz Grotesk, Helvetica Greek fonts Attika, Typiko New Era, MS Tahoma, Monotype Gill Sans 571, Helvetica Greek Cyrillic fonts Helvetica Cyrillic, ER Univers, Lucida Sans Unicode, Bastion Hebrew fonts Arial Hebrew, MS Tahoma Japanese fonts Shin Go, Heisei Kaku Gothic W5 Arabic fonts MS Tahoma cursive Glyphs in cursive fonts, as the term is used in CSS, generally have either joining strokes or other cursive characteristics beyond those of italic typefaces. The glyphs are partially or completely connected, and the result looks more like handwritten pen or brush writing than printed letterwork. Fonts for some scripts, such as Arabic, are almost always cursive. CSS uses the term 'cursive' to apply to a font for any script, although other names such as Chancery, Brush, Swing and Script are also used in font names. Examples of fonts that fit this description include: Latin fonts Caflisch Script, Adobe Poetica, Sanvito, Ex Ponto, Snell Roundhand, Zapf-Chancery Cyrillic fonts ER Architekt Hebrew fonts Corsiva Arabic fonts DecoType Naskh, Monotype Urdu 507 fantasy Fantasy fonts, as used in CSS, are primarily decorative while still containing representations of characters (as opposed to Pi or Picture fonts, which do not represent characters). Examples include: Latin fonts Alpha Geometrique, Critter, Cottonwood, FB Reactor, Studz monospace The sole criterion of a monospace font is that all glyphs have the same fixed width. (This can make some scripts, such as Arabic, look most peculiar.) The effect is similar to a manual typewriter, and is often used to set samples of computer code. Examples of fonts which fit this description include: Latin fonts Courier, MS Courier New, Prestige, Everson Mono Greek Fonts MS Courier New, Everson Mono Cyrillic fonts ER Kurier, Everson Mono Japanese fonts Osaka Monospaced Cherokee fonts Everson Mono 15.3 Font selection The second phase of the CSS2 font mechanism concerns the user agent's selection of a font based on author-specified font properties, available fonts, etc. The details of the font matching algorithm are provided below. There are four possible font selection actions: name matching, intelligent matching, synthesis, and download. font name matching In this case, the user agent uses an existing, accessible font that has the same family name as the requested font. (Note that the appearance and the metrics might not necessarily match, if the font that the document author used and the font on the client system are from different foundries). The matching information is restricted to the CSS font properties, including the family name. This is the only method used by CSS1. intelligent font matching In this case, the user agent uses an existing, accessible font that is the closest match in appearance to the requested font. (Note that the metrics might not match exactly). The matching information includes information about the kind of font (text or symbol), nature of serifs, weight, cap height, x height, ascent, descent, slant, etc. font synthesis In this case, the user agent creates a font that is not only a close match in appearance, but also matches the metrics of the requested font. The synthesizing information includes the matching information and typically requires more accurate values for the parameters than are used for some matching schemes. In particular, synthesis requires accurate width metrics and character to glyph substitution and position information if all the layout characteristics of the specified font are to be preserved. font download Finally, the user agent may retrieve a font over the Web. This is similar to the process of fetching images, sounds, or applets over the Web for display in the current document, and likewise can cause some delay before the page can be displayed. Progressive rendering is a combination of download and one of the other methods; it provides a temporary substitute font (using name matching, intelligent matching, or synthesis) to allow content to be read while the requested font downloads. Once the real font has been successfully downloaded, it replaces the temporary font, hopefully without the need to reflow. Note. Progressive rendering requires metric information about the font in order to avoid re-layout of the content when the actual font has been loaded and rendered. This metric information is sufficiently verbose that it should only be specified at most once per font in a document. 15.3.1 Font Descriptions and @font-face The font description provides the bridge between an author's font specification and the font data , which is the data needed to format text and to render the abstract glyphs to which the characters map - the actual scalable outlines or bitmaps. Fonts are referenced by style sheet properties. The font description is added to the font database and then used to select the relevant font data. The font description contains descriptors such as the location of the font data on the Web, and characterizations of that font data. The font descriptors are also needed to match the style sheet font properties to particular font data. The level of detail of a font description can vary from just the name of the font up to a list of glyph widths. Font descriptors may be classified into three types: those that provide the link between the CSS usage of the font and the font description (these have the same names as the corresponding CSS font properties), the URI for the location of the font data, those that further characterize the font, to provide a link between the font description and the font data. All font descriptions are specified via a @font-face at-rule . The general form is: @font-face { <font-description> } where the <font-description> has the form: descriptor: value; descriptor: value; [...] descriptor: value; Each @font-face rule specifies a value for every font descriptor, either implicitly or explicitly. Those not given explicit values in the rule take the initial value listed with each descriptor in this specification. These descriptors apply solely within the context of the @font-face rule in which they are defined, and do not apply to document language elements. Thus, there is no notion of which elements the descriptors apply to, or whether the values are inherited by child elements. The available font descriptors are described in later sections of this specification. For example, here the font 'Robson Celtic' is defined and referenced in a style sheet contained in an HTML document. <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN"> <HTML> <HEAD> <TITLE>Font test</TITLE> <STYLE TYPE="text/css" MEDIA="screen, print"> @font-face { font-family: "Robson Celtic"; src: url("http://site/fonts/rob-celt") } H1 { font-family: "Robson Celtic", serif } </STYLE> </HEAD> <BODY> <H1> This heading is displayed using Robson Celtic</H1> </BODY> </HTML> The style sheet (in the STYLE element) contains a CSS rule that sets all H1 elements to use the 'Robson Celtic' font family. A CSS1 implementation will search the client for a font whose family name and other properties match 'Robson Celtic' and, if it fails to find it, will use the UA-specific fallback serif font (which is defined to exist ). A user agent implementing CSS2 will first examine @font-face rules in search of a font description defining 'Robson Celtic'. This example contains a rule that matches. Although this rule doesn't contain much font data, it does have a URI where the font can be retrieved for rendering this document. Downloaded fonts should not be made available to other applications. If no matching @font-face is found, the user agent will attempt the same match as a user agent implementing CSS1. Note that if the font 'Robson Celtic' had been installed on the client system, this would have caused the UA to add an entry in the font database for the installed copy as described in the section on the font matching algorithm . The installed copy would have been matched before the downloadable font in the example above. CSS1 implementations, which do not understand the @font-face rule, will encounter the opening curly brackets and will ignore forward until the matching closing curly brackets. This at-rule conforms with the forward-compatible parsing requirement of CSS. Parsers may ignore these rules without error. Having the font descriptors separate from the font data has a benefit beyond being able to do font selection and/or substitution. The data protection and replication restrictions on the font descriptors may be much weaker than on the full font data. Thus, it may be possible to install the font definition locally, or at least to have it in a local cache if it occurs in a commonly referenced style sheet; this would not require accessing the full font definition over the Web more than once per named font. If a font descriptor is duplicated, the last occurring descriptor wins and the rest must be ignored. Also, any descriptors that are not recognized or useful to the user agent must be ignored . Future versions of CSS may allow additional descriptors for the purpose of better font substitution, matching, or synthesis. 15.3.2 Descriptors for Selecting a Font : 'font-family' , 'font-style' , 'font-variant' , 'font-weight' , 'font-stretch' and 'font-size' The following descriptors have the same names as the corresponding CSS2 font properties, and take a single value or comma-separated list of values. The values within that list are, except as explicitly noted, the same as those for the corresponding CSS2 property. If there is a single value, that is the value that must be matched. If there is a list, any list item constitutes a match. If the descriptor is omitted from the @font-face , the initial value for the descriptor is used. 'font-family' (Descriptor) Value:    [ <family-name> | <generic-family> ] [, [ <family-name> | <generic-family> ]]* Initial:    depends on user agent Media:    visual This is the descriptor for the font family name of a font and takes the same values as the 'font-family' property. 'font-style' (Descriptor) Value:    all | [ normal | italic | oblique ] [, [normal | italic | oblique] ]* Initial:    all Media:    visual This is the descriptor for the style of a font and takes the same values as the 'font-style' property, except that a comma-separated list is permitted. 'font-variant' (Descriptor) Value:    [normal | small-caps] [,[normal | small-caps]]* Initial:    normal Media:    visual This is the CSS indication of whether this face is the small-caps variant of a font. It takes the same values as the 'font-variant' property except that a comma-separated list is permitted. Note. Cyrillic pryamoĭ faces may be labeled with a 'font-variant' of small-caps, which will give better consistency with Latin faces (and the companion kursiv face labeled with 'font-style' italic for the same reason). 'font-weight' (Descriptor) Value:    all | [normal | bold | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900] [, [normal | bold | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900]]* Initial:    all Media:    visual This is the descriptor for the weight of a face relative to others in the same font family. It takes the same values as the 'font-weight' property with three exceptions: relative keywords (bolder, lighter) are not permitted. a comma-separated list of values is permitted, for fonts that contain multiple weights. an additional keyword, 'all' is permitted, which means that the font will match for all possible weights; either because it contains multiple weights, or because that face only has a single weight. 'font-stretch' (Descriptor) Value:    all | [ normal | ultra-condensed | extra-condensed | condensed | semi-condensed | semi-expanded | expanded | extra-expanded | ultra-expanded ] [, [ normal | ultra-condensed | extra-condensed | condensed | semi-condensed | semi-expanded | expanded | extra-expanded | ultra-expanded] ]* Initial:    normal Media:    visual This is the CSS indication of the condensed or expanded nature of the face relative to others in the same font family. It takes the same values as the 'font-stretch' property except that: relative keywords (wider, narrower) are not permitted a comma-separated list is permitted The keyword 'all' is permitted 'font-size' (Descriptor) Value:    all | <length> [, <length> ]* Initial:    all Media:    visual This is the descriptor for the sizes provided by this font. Only absolute length units are permitted, in contrast to the 'font-size' property, which allows both relative and absolute lengths and sizes. A comma-separated list of absolute lengths is permitted. The initial value of 'all' is suitable for most scalable fonts, so this descriptor is primarily for use in an @font-face for bitmap fonts, or scalable fonts designed to be rasterised at a restricted range of font sizes. 15.3.3 Descriptors for Font Data Qualification : 'unicode-range' The following descriptor is optional within a font definition, but is used to avoid checking or downloading a font that does not have sufficient glyphs to render a particular character. 'unicode-range' (Descriptor) Value:    <urange> [, <urange> ]* Initial:    U+0-7FFFFFFF Media:    visual This is the descriptor for the range of ISO 10646 characters covered by the font. The values of <urange> are expressed using hexadecimal numbers prefixed by "U+", corresponding to character code positions in ISO 10646 ( [ISO10646] ). For example, U+05D1 is the ISO 10646 character 'Hebrew letter bet'. For values outside the Basic Multilingual Plane (BMP), additional leading digits corresponding to the plane number are added, also in hexadecimal, like this: U+A1234 which is the character on Plane 10 at hexadecimal code position 1234. At the time of writing no characters had been assigned outside the BMP. Leading zeros (for example, 0000004D) are valid, but not required. The initial value of this descriptor covers not only the entire Basic Multilingual Plane (BMP), which would be expressed as U+0-FFFF, but also the whole repertoire of ISO 10646. Thus, the initial value says that the font may have glyphs for characters anywhere in ISO 10646. Specifying a value for 'unicode-range' provides information to make searching efficient, by declaring a constrained range in which the font may have glyphs for characters. The font need not be searched for characters outside this range. Values may be written with any number of digits. For single numbers, the character '?' is assumed to mean 'any value' which creates a range of character positions. Thus, using a single number : unicode-range: U+20A7 no wild cards - it indicates a single character position (the Spanish peseta currency symbol) unicode-range: U+215? one wild card, covers the range 2150 to 215F (the fractions) unicode-range: U+00?? two wild cards, covers the range 0000 to 00FF (Latin-1) unicode-range: U+E?? two wild cards, covers 0E00 to 0EFF (the Lao script) A pair of numbers in this format can be combined with the dash character to indicate larger ranges. For example: unicode-range: U+AC00-D7FF the range is AC00 to D7FF (the Hangul Syllables area) Multiple, discontinuous ranges can be specified, separated by a comma. As with other comma-separated lists in CSS, any whitespace before or after the comma is ignored. For example: unicode-range: U+370-3FF, U+1F?? This covers the range 0370 to 03FF (Modern Greek) plus 1F00 to 1FFF (Ancient polytonic Greek). unicode-range: U+3000-303F, U+3100-312F, U+32??, U+33??, U+4E00-9FFF, U+F9000-FAFF, U+FE30-FE4F Something of a worst case in terms of verbosity, this very precisely indicates that this (extremely large) font contains only Chinese characters from ISO 10646, without including any characters that are uniquely Japanese or Korean. The range is 3000 to 303F (CJK symbols and punctuation) plus 3100 to 312F (Bopomofo) plus 3200 to 32FF (enclosed CJK letters and months) plus 3300 to 33FF (CJK compatibility zone) plus 4E00 to 9FFF (CJK unified Ideographs) plus F900 to FAFF (CJK compatibility ideographs) plus FE30 to FE4F (CJK compatibility forms). A more likely representation for a typical Chinese font would be: unicode-range: U+3000-33FF, U+4E00-9FFF unicode-range: U+11E00-121FF This font covers a proposed registration for Aztec pictograms, covering the range 1E00 to 21FF in plane 1. unicode-range: U+1A00-1A1F This font covers a proposed registration for Irish Ogham covering the range 1A00 to 1A1F 15.3.4 Descriptor for Numeric Values : 'units-per-em' The following descriptor specifies the number of "units" per em; these units may be used by several other descriptors to express various lengths, so 'units-per-em' is required if other descriptors depend on it. 'units-per-em' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the number of the coordinate units on the em square , the size of the design grid on which glyphs are laid out. 15.3.5 Descriptor for Referencing : 'src' This descriptor is required for referencing actual font data, whether downloadable or locally installed. 'src' (Descriptor) Value:    [ <uri> [format( <string> [, <string> ]*)] | <font-face-name> ] [, <uri> [format( <string> [, <string> ]*)] | <font-face-name> ]* Initial:    undefined Media:    visual This is a prioritized, comma-separated list of external references and/or locally installed font face names. The external reference points to the font data on the Web. This is required if the WebFont is to be downloaded. The font resource may be a subset of the source font, for example it may contain only the glyphs needed for the current page or for a set of pages. The external reference consists of a URI, followed by an optional hint regarding the format of font resource to be found at that URI, and this information should be used by clients to avoid following links to fonts in formats they are unable to use. As with any hypertext reference, there may be other formats available, but the client has a better idea of what is likely to be there, in a more robust way than trying to parse filename extensions in URIs. The format hint contains a comma-separated list of format strings that denote well-known font formats. The user agent will recognize the name of font formats that it supports, and will avoid downloading fonts in formats that it does not recognize. An initial list of format strings defined by this specification and representing formats likely to be used by implementations on various platforms is: String Font Format Examples of common extensions "truedoc-pfr" TrueDoc™ Portable Font Resource .pfr "embedded-opentype" Embedded OpenType .eot "type-1" PostScript™ Type 1 .pfb, .pfa "truetype" TrueType .ttf "opentype" OpenType, including TrueType Open .ttf "truetype-gx" TrueType with GX extensions "speedo" Speedo "intellifont" Intellifont As with other URIs in CSS , the URI may be partial, in which case it is resolved relative to the location of the style sheet containing the @font-face . The locally-installed <font-face-name> is the full font name of a locally installed font. The full font name is the name of the font as reported by the operating system and is the name most likely to be used in reader style sheets, browser default style sheets or possibly author style sheets on an intranet. Adornments such as bold, italic, and underline are often used to differentiate faces within a font family. For more information about full font names please consult the notes below. The notation for a <font-face-name> is the full font name, which must be quoted since it may contain any character, including spaces and punctuation, and also must be enclosed in "local(" and ")". Example(s): src: url("http://foo/bar") a full URI and no information about the font format(s) available there src: local("BT Century 751 No. 2 Semi Bold Italic") references a particular face of a locally installed font src: url("../fonts/bar") format("truedoc-pfr") a partial URI which has a font available in TrueDoc format src: url("http://cgi-bin/bar?stuff") format("opentype", "intellifont") a full URI, in this case to a script, which can generate two different formats - OpenType and Intellifont src: local("T-26 Typeka Mix"), url("http://site/magda-extra") format("type-1") two alternatives are given, firstly a locally installed font and secondly a downloadable font available in Type 1 format. Access to locally installed fonts is via the <font-face-name> . The font face name is not truly unique, nor is it truly platform or font format independent, but at the moment it is the best way to identify locally installed font data. The use of the font face name can be made more accurate by providing an indication of the glyph complement required. This may be done by indicating the range of ISO 10646 character positions for which the font provides some glyphs (see 'unicode-range' ). 15.3.6 Descriptors for Matching : 'panose-1' , 'stemv' , 'stemh' , 'slope' , 'cap-height' , 'x-height' , 'ascent' , and 'descent' These descriptors are optional for a CSS2 definition, but may be used if intelligent font matching or font size adjustment is desired by the author. 'panose-1' (Descriptor) Value:    [ <integer> ]{10} Initial:    0 0 0 0 0 0 0 0 0 0 Media:    visual This is the descriptor for the Panose-1 number and consists of ten decimal integers, separated by whitespace . A comma-separated list is not permitted for this descriptor, because the Panose-1 system can indicate that a range of values are matched. The initial value is zero, which means "any", for each PANOSE digit; all fonts will match the Panose number if this value is used. Use of the Panose-1 descriptor is strongly recommended for latin fonts. For further details, see Appendix C . 'stemv' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the vertical stem width of the font. If the value is undefined, the descriptor is not used for matching. If this descriptor is used, the 'units-per-em' descriptor must also be used. 'stemh' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the horizontal stem width of the font. If the value is undefined, the descriptor is not used for matching. If this descriptor is used, the 'units-per-em' descriptor must also be used. 'slope' (Descriptor) Value:    <number> Initial:    0 Media:    visual This is the descriptor for the vertical stroke angle of the font. 'cap-height' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the number of the height of uppercase glyphs of the font. If the value is undefined, the descriptor is not used for matching. If this descriptor is used, the 'units-per-em' descriptor must also be used. 'x-height' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the height of lowercase glyphs of the font. If the value is undefined, the descriptor is not used for matching. If this descriptor is used, the 'units-per-em' descriptor must also be used. This descriptor can be very useful when using the 'font-size-adjust' property, because computation of the z value of candidate fonts requires both the font size and the x-height; it is therefore recommended to include this descriptor. 'ascent' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the maximum unaccented height of the font. If the value is undefined, the descriptor is not used for matching. If this descriptor is used, the 'units-per-em' descriptor must also be used. 'descent' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the Maximum unaccented depth of the font. If the value is undefined, the descriptor is not used for matching. If this descriptor is used, the 'units-per-em' descriptor must also be used. 15.3.7 Descriptors for Synthesis : 'widths' , 'bbox' and 'definition-src' Synthesizing a font means, at minimum, matching the width metrics of the specified font. Therefore, for synthesis, this metric information must be available. Similarly, progressive rendering requires width metrics in order to avoid reflow of the content when the actual font has been loaded. Although the following descriptors are optional for a CSS2 definition, some are required if synthesizing (or reflow-free progressive rendering) is desired by the author. Should the actual font become available, the substitute should be replaced by the actual font. Any of these descriptors that are present will be used to provide a better or faster approximation of the intended font. Of these descriptors, the most important are the 'widths' descriptor and 'bbox' which are used to prevent text reflow should the actual font become available. In addition, the descriptors in the set of descriptors used for matching can be used to provide a better synthesis of the actual font appearance. 'widths' (Descriptor) Value:    [ <urange> ]? [ <number> ]+ [,[ <urange> ]? <number> ]+] Initial:    undefined Media:    visual This is the descriptor for the glyph widths . The value is a comma-separated list of <urange> values each followed by one or more glyph widths. If this descriptor is used, the 'units-per-em' descriptor must also be used. If the <urange> is omitted, a range of U+0-7FFFFFFF is assumed which covers all characters and their glyphs. If not enough glyph widths are given, the last in the list is replicated to cover that urange. If too many widths are provided, the extras are ignored. Example(s): For example: widths: U+4E00-4E1F 1736 1874 1692 widths: U+1A?? 1490, U+215? 1473 1838 1927 1684 1356 1792 1815 1848 1870 1492 1715 1745 1584 1992 1978 1770 In the first example a range of 32 characters is given, from 4E00 to 4E1F. The glyph corresponding to the first character (4E00) has a width of 1736, the second has a width of 1874 and the third, 1692. Because not enough widths have been provided, the last width replicates to cover the rest of the specified range. The second example sets a single width, 1490, for an entire range of 256 glyphs and then explicit widths for a range of 16 glyphs. This descriptor cannot describe multiple glyphs corresponding to a single character, or ligatures of multiple characters. Thus, this descriptor can only be used for scripts that do not have contextual forms or mandatory ligatures. It is nevertheless useful in those situations. Scripts that require a one-to-many or many-to-many mapping of characters to glyphs cannot at present use this descriptor to enable font synthesis although they can still use font downloading or intelligent matching. 'bbox' (Descriptor) Value:    <number> , <number> , <number> , <number> Initial:    undefined Media:    visual This is the descriptor for the maximal bounding box of the font. The value is a comma-separated list of exactly four numbers specifying, in order, the lower left x, lower left y, upper right x, and upper right y of the bounding box for the complete font. 'definition-src' (Descriptor) Value:    <uri> Initial:    undefined Media:    visual The font descriptors may either be within the font definition in the style sheet, or may be provided within a separate font definition resource identified by a URI. The latter approach can reduce network traffic when multiple style sheets reference the same fonts. 15.3.8 Descriptors for Alignment : 'baseline' , 'centerline' , 'mathline' , and 'topline' These optional descriptors are used to align runs of different scripts with one another. 'baseline' (Descriptor) Value:    <number> Initial:    0 Media:    visual This is the descriptor for the lower baseline of a font. If this descriptor is given a non-default (non-zero) value, the 'units-per-em' descriptor must also be used. 'centerline' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the central baseline of a font. If the value is undefined, the UA may employ various heuristics such as the midpoint of the ascent and descent values. If this descriptor is used, the 'units-per-em' descriptor must also be used. 'mathline' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the mathematical baseline of a font. If undefined, the UA may use the center baseline. If this descriptor is used, the 'units-per-em' descriptor must also be used. 'topline' (Descriptor) Value:    <number> Initial:    undefined Media:    visual This is the descriptor for the top baseline of a font. If undefined, the UA may use an approximate value such as the ascent. If this descriptor is used, the 'units-per-em' descriptor must also be used. 15.3.9 Examples Example(s): Given the following list of fonts: Swiss 721 light light & light italic Swiss 721 roman, bold, italic, bold italic Swiss 721 medium medium & medium italic Swiss 721 heavy heavy & heavy italic Swiss 721 black black, black italic, & black #2 Swiss 721 Condensed roman, bold, italic, bold italic Swiss 721 Expanded roman, bold, italic, bold italic The following font descriptions could be used to make them available for download. @font-face { font-family: "Swiss 721"; src: url("swiss721lt.pfr"); /* Swiss 721 light */ font-style: normal, italic; font-weight: 200; } @font-face { font-family: "Swiss 721"; src: url("swiss721.pfr"); /* The regular Swiss 721 */ } @font-face { font-family: "Swiss 721"; src: url("swiss721md.pfr"); /* Swiss 721 medium */ font-style: normal, italic; font-weight: 500; } @font-face { font-family: "Swiss 721"; src: url("swiss721hvy.pfr"); /* Swiss 721 heavy */ font-style: normal, italic; font-weight: 700; } @font-face { font-family: "Swiss 721"; src: url("swiss721blk.pfr"); /* Swiss 721 black */ font-style: normal, italic; font-weight: 800,900; /* note the interesting problem that the 900 weight italic doesn't exist */ } @font-face { font-family: "Swiss 721"; src: url(swiss721.pfr); /* The condensed Swiss 721 */ font-stretch: condensed; } @font-face { font-family: "Swiss 721"; src: url(swiss721.pfr); /* The expanded Swiss 721 */ font-stretch: expanded; } 15.4 Font Characteristics 15.4.1 Introducing Font Characteristics In this section are listed the font characteristics that have been found useful for client-side font matching, synthesis, and download for heterogeneous platforms accessing the Web. The data may be useful for any medium that needs to use fonts on the Web by some other means than physical embedding of the font data inside the medium. These characteristics are used to characterize fonts. They are not specific to CSS, or to style sheets. In CSS, each characteristic is described by a font descriptor. These characteristics could also be mapped onto VRML nodes, or CGM Application Structures, or a Java API, or alternative style sheet languages. Fonts retrieved by one medium and stored in a proxy cache could be re-used by another medium, saving download time and network bandwidth, if a common system of font characteristics are used throughout. A non-exhaustive list of examples of such media includes: 2-D vector formats Computer Graphics Metafile Simple Vector Format 3-D graphics formats VRML 3DMF Object embedding technologies Java Active-X Obliq 15.4.2 Full font name This is the full name of a particular face of a font family. It typically includes a variety of non-standardized textual qualifiers or adornments appended to the font family name. It may also include a foundry name or abbreviation, often prepended to the font family name. It is only used to refer to locally installed fonts, because the format of the adorned name can vary from platform to platform. It must be quoted. For example, the font family name of the TrueType font and the PostScript name may differ in the use of space characters, punctuation, and in the abbreviation of some words (e.g., to meet various system or printer interpreter constraints on length of names). For example, spaces are not allow in a PostScript name, but are common in full font names. The TrueType name table can also contain the PostScript name, which has no spaces. The name of the font definition is important because it is the link to any locally installed fonts. It is important that the name be robust, both with respect to platform and application independence. For this reason, the name should be one that is not application- or language-specific. The ideal solution would be to have a name that uniquely identifies each collection of font data. This name does not exist in current practice for font data. Fonts with the same face name can vary over a number of descriptors. Some of these descriptors, such as different complements of glyphs in the font, may be insignificant if the needed glyphs are in the font. Other descriptors, such as different width metrics, make fonts with the same name incompatible. It does not seem possible to define a rule that will always identify incompatibilities, but will not prevent the use of a perfectly suitable local copy of the font data with a given name. Therefore, only the range of ISO 10646 characters will be used to qualify matches for the font face name. Since a prime goal of the font face name in the font definition is to allow a user agent to determine when there is a local copy of the specified font data, the font face name must be a name that will be in all legitimate copies of the font data. Otherwise, unnecessary Web traffic may be generated due to missed matches for the local copy. 15.4.3 Coordinate units on the em square Certain values, such as width metrics, are expressed in units that are relative to an abstract square whose height is the intended distance between lines of type in the same type size. This square is called the em square and it is the design grid on which the glyph outlines are defined. The value of this descriptor specifies how many units the EM square is divided into. Common values are for example 250 (Intellifont), 1000 (Type 1) and 2048 (TrueType, TrueType GX and OpenType). If this value is not specified, it becomes impossible to know what any font metrics mean. For example, one font has lowercase glyphs of height 450; another has smaller ones of height 890! The numbers are actually fractions; the first font has 450/1000 and the second has 890/2048 which is indeed smaller. 15.4.4 Central Baseline This gives the position in the em square of the central baseline. The central baseline is used by ideographic scripts for alignment, just as the bottom baseline is used for Latin, Greek, and Cyrillic scripts. 15.4.5 Font Encoding Either explicitly or implicitly, each font has a table associated with it, the font encoding table , that tells what character each glyph represents. This table is also referred to as an encoding vector . In fact, many fonts contain several glyphs for the same character. Which of those glyphs should be used depends either on the rules of the language, or on the preference of the designer. In Arabic, for example, all letters have four (or two) different shapes, depending on whether the letter is used at the start of a word, in the middle, at the end, or in isolation. It is the same character in all cases, and thus there is only one character in the source document, but when printed, it looks different each time. There are also fonts that leave it to the graphic designer to choose from among various alternative shapes provided. Unfortunately, CSS2 doesn't yet provide the means to select those alternatives. Currently, it is always the default shape that is chosen from such fonts. 15.4.6 Font family name This specifies the family name portion of the font face name. For example, the family name for Helvetica-Bold is Helvetica and the family name of ITC Stone Serif Semibold Italic is ITC Stone Serif. Some systems treat adornments relating to condensed or expanded faces as if they were part of the family name. 15.4.7 Glyph widths This is a list of widths, on the design grid, for the glyph corresponding to each character. The list is ordered by ISO10646 code point. Widths cannot usefully be specified when more than one glyph maps to the same character or when there are mandatory ligatures. 15.4.8 Horizontal stem width This value refers to the dominant stem of the font. There may be two or more designed widths. For example, the main vertical stems of Roman characters will differ from the thin stems on serifed "M" and "N", plus there may be different widths for uppercase and lowercase characters in the same font. Also, either by design or by error, all stems may have slightly different widths. 15.4.9 Height of uppercase glyphs This measurement is the y-coordinate of the top of flat uppercase letters in Latin, Greek, and Cyrillic scripts, measured from the baseline. This descriptor is not necessarily useful for fonts that do not contain any glyphs from these scripts. 15.4.10 Height of lowercase glyphs This measurement is the y-coordinate of the top of unaccented, non-ascending lowercase letters in Latin, Greek and Cyrillic scripts, measured from the baseline. Flat-topped letters are used, ignoring any optical correction zone. This is usually used as a ratio of lowercase to uppercase heights as a means to compare font families. This descriptor is not useful for fonts that do not contain any glyphs from these scripts. Since the heights of lowercase and uppercase letters are often expressed as a ratio for comparing different fonts, it may be useful to set both the lowercase and uppercase heights to the same value for unicameral scripts such as Hebrew, where for mixed Latin and Hebrew text, the Hebrew characters are typically set at a height midway between the uppercase and lowercase heights of the Latin font. 15.4.11 Lower Baseline This gives the position in the em square of the lower baseline. The lower baseline is used by Latin, Greek, and Cyrillic scripts for alignment, just as the upper baseline is used for Sanscrit-derived scripts. 15.4.12 Mathematical Baseline This gives the position in the em square of the mathematical baseline. The mathematical baseline is used by mathematical symbols for alignment, just as the lower baseline is used for Latin, Greek, and Cyrillic scripts. 15.4.13 Maximal bounding box The maximal bounding box is the smallest rectangle enclosing the shape that results if all glyphs in the font are placed with their origins coincident, and then painted. If a dynamically downloadable font has been generated by subsetting a parent font, the bbox should be that of the parent font. 15.4.14 Maximum unaccented height This measurement, on the em square, is from the baseline to the highest point reached by any glyph, excluding any accents or diacritical marks. 15.4.15 Maximum unaccented depth This measurement, on the em square, is from the baseline to the lowest point reached by any glyph, excluding any accents or diacritical marks. 15.4.16 Panose-1 number Panose-1 is an industry standard TrueType font classification and matching technology. The PANOSE system consists of a set of ten numbers that categorize the key attributes of a Latin typeface, a classification procedure for creating those numbers, and Mapper software that determines the closest possible font match given a set of typefaces. The system could , with modification, also be used for Greek and Cyrillic, but is not suitable for unicameral and ideographic scripts (Hebrew, Armenian, Arabic, Chinese/Japanese/Korean). 15.4.17 Range of ISO 10646 characters This indicates the glyph repertoire of the font, relative to ISO 10646 (Unicode). Since this is sparse (most fonts do not cover the whole of ISO 10646) this descriptor lists blocks or ranges that do have some coverage (no promise is made of complete coverage) and is used to eliminate unsuitable fonts (ones that will not have the required glyphs). It does not indicate that the font definitely has the required glyphs, only that it is worth downloading and looking at the font. See [ISO10646] for information about useful documents. This method is extensible to future allocation of characters in Unicode, without change of syntax and without invalidating existing content. Font formats that do not include this information, explicitly or indirectly, may still use this characteristic, but the value must be supplied by the document or style sheet author. There are other classifications into scripts, such as the Monotype system (see [MONOTYPE] ) and a proposed ISO script system. These are not readily extensible. Because of this, classification of glyph repertoires by the range of ISO 10646 characters that may be represented with a particular font is used in this specification. This system is extensible to cover any future allocation. 15.4.18 Top Baseline This gives the position in the em square of the top baseline. The top baseline is used by Sanscrit-derived scripts for alignment, just as the bottom baseline is used for Latin, Greek, and Cyrillic scripts. 15.4.19 Vertical stem width This is the width of vertical (or near-vertical) stems of glyphs. This information is often tied to hinting, and may not be directly accessible in some font formats. The measurement should be for the dominant vertical stem in the font because there might be different groupings of vertical stems (e.g., one main one, and one lighter weight one as for an uppercase M or N). 15.4.20 Vertical stroke angle This is the angle, in degrees counterclockwise from the vertical, of the dominant vertical strokes of the font. The value is negative for fonts that slope to the right, as almost all italic fonts do. This descriptor may also be specified for oblique fonts, slanted fonts, script fonts, and in general for any font whose vertical strokes are not precisely vertical. A non-zero value does not of itself indicate an italic font. 15.5 Font matching algorithm This specification extends the algorithm given in the CSS1 specification. This algorithm reduces down to the algorithm in the CSS1 specification when the author and reader style sheets do not contain any @font-face rules. Matching of descriptors to font faces must be done carefully. The descriptors are matched in a well-defined order to insure that the results of this matching process are as consistent as possible across UAs (assuming that the same library of font faces and font descriptions is presented to each of them). This algorithm may be optimized, provided that an implementation behaves as if the algorithm had been followed exactly. The user agent makes (or accesses) a database of relevant font-face descriptors of all the fonts of which the UA is aware. If there are two fonts with exactly the same descriptors, one of them is ignored. The UA may be aware of a font because: it has been installed locally it is declared using an @font-face rule in one of the style sheets linked to or contained in the current document it is used in the UA default style sheet, which conceptually exists in all UAs and is considered to have full @font-face rules for all fonts which the UA will use for default presentation, plus @font-face rules for the five special generic font families (see 'font-family' ) defined in CSS2 At a given element and for each character in that element, the UA assembles the font properties applicable to that element. Using the complete set of properties, the UA uses the 'font-family' descriptor to choose a tentative font family. Thus, matching on a family name will succeed before matching on some other descriptor. The remaining properties are tested against the family according to the matching criteria described with each descriptor. If there are matches for all the remaining properties, then that is the matching font face for the given element. If there is no matching font face within the 'font-family' being processed by step 2, UAs that implement intelligent matching may proceed to examine other descriptors such as x-height, glyph widths, and panose-1 to identify a different tentative font family. If there are matches for all the remaining descriptors, then that is the matching font face for the given element. The 'font-family' descriptor that is reflected into the CSS2 properties is the font family that was requested, not whatever name the intelligently matched font may have. UAs that do not implement intelligent matching are considered to fail at this step. If there is no matching font face within the 'font-family' being processed by step 3, UAs that implement font downloading may proceed to examine the 'src' descriptor of the tentative font face identified in step 2 or 3 to identify a network resource that is available, and of the correct format. If there are matches for all the remaining descriptors, then that is the matching font face for the given element and the UA may attempt to download this font resource. The UA may choose to block on this download or may choose to proceed to the next step while the font downloads. UAs that do not implement font download, or are not connected to a network, or where the user preferences have disabled font download, or where the requested resource is unavailable for whatever reason, or where the downloaded font cannot be used for whatever reason, are considered to fail at this step. If there is no matching font face within the 'font-family' being processed by step 3, UAs that implement font synthesis may proceed to examine other descriptors such as 'x-height' , glyph widths, and 'panose-1' to identify a different tentative font family for synthesis. If there are matches for all the remaining descriptors, then that is the matching font face for the given element and synthesis of the faux font may begin. UAs that do not implement font synthesis are considered to fail at this step. If all of steps 3, 4 and 5 fail, and if there is a next alternative 'font-family' in the font set, then repeat from step 2 with the next alternative 'font-family' . If there is a matching font face, but it doesn't contain glyph(s) for the current character(s), and if there is a next alternative 'font-family' in the font sets, then repeat from step 2 with the next alternative 'font-family' . The 'unicode-range' descriptor may be used to rapidly eliminate from consideration those font faces that do not have the correct glyphs. If the 'unicode-range' descriptor indicates that a font contains some glyphs in the correct range, it may be examined by the UA to see if it has that particular one. If there is no font within the family selected in 2, then use the inherited or UA-dependent 'font-family' value and repeat from step 2, using the best match that can be obtained within this font. If a particular character cannot be displayed using this font, the UA should indicate that a character is not being displayed (for example, using the 'missing character' glyph). UAs that implement progressive rendering and have pending font downloads may, once download is successful, use the downloaded font as a font family. If the downloaded font is missing some glyphs that the temporary progressive font did contain, the downloaded font is not used for that character and the temporary font continues to be used. Note. The above algorithm can be optimized to avoid having to revisit the CSS2 properties for each character. The per-descriptor matching rules from (2) above are as follows: 'font-style' is tried first. 'italic' will be satisfied if there is either a face in the UA's font database labeled with the CSS keyword 'italic' (preferred) or 'oblique'. Otherwise the values must be matched exactly or font-style will fail. 'font-variant' is tried next. 'normal' matches a font not labeled as 'small-caps'; 'small-caps' matches (1) a font labeled as 'small-caps', (2) a font in which the small caps are synthesized, or (3) a font where all lowercase letters are replaced by uppercase letters. A small-caps font may be synthesized by electronically scaling uppercase letters from a normal font. 'font-weight' is matched next, it will never fail. (See 'font-weight' below.) 'font-size' must be matched within a UA-dependent margin of tolerance. (Typically, sizes for scalable fonts are rounded to the nearest whole pixel, while the tolerance for bitmapped fonts could be as large as 20%.) Further computations, e.g., by 'em' values in other properties, are based on the 'font-size' value that is used, not the one that is specified. 15.5.1 Mapping font weight values to font names The 'font-weight' property values are given on a numerical scale in which the value '400' (or 'normal') corresponds to the "normal" text face for that family. The weight name associated with that face will typically be Book, Regular, Roman, Normal or sometimes Medium . The association of other weights within a family to the numerical weight values is intended only to preserve the ordering of weights within that family. User agents must map names to values in a way that preserves visual order; a face mapped to a value must not be lighter than faces mapped to lower values. There is no guarantee on how a user agent will map font faces within a family to weight values. However, the following heuristics tell how the assignment is done in typical cases: If the font family already uses a numerical scale with nine values (as e.g., OpenType does), the font weights should be mapped directly. If there is both a face labeled Medium and one labeled Book, Regular, Roman or Normal, then the Medium is normally assigned to the '500'. The font labeled "Bold" will often correspond to the weight value '700'. If there are fewer then 9 weights120%/120% fantasy }

In the family, the default algorithm for fillingsecond rule, the "holes" is as follows. If '500' is unassigned, it will be assignedfont size percentage value ('80%') refers to the samefont as '400'. If anysize of the values '600', '700', '800', or '900' remains unassigned, they are assigned to the same face asparent element. In the next darker assigned keyword, if any, orthird rule, the next lighter one otherwise. If any of '300', '200', or '100' remains unassigned, it is assignedline height percentage refers to the next lighter assigned keyword, if any, or the next darker otherwise. There is no guarantee that there will be a darker face for eachfont size of the 'font-weight' values; for example, some fonts may have only a normal and a bold face, others may have eight different face weights. The following two examples show typical mappings. Assume four weightselement itself.

In the "Rattlesnake" family, from lightest to darkest: Regular, Medium, Bold, Heavy.first example of font-weight mapping Available faces Assignments Filling the holes "Rattlesnake Regular" 400 100, 200, 300 "Rattlesnake Medium" 500   "Rattlesnake Bold" 700 600 "Rattlesnake Heavy" 800 900 Assume six weights in the "Ice Prawn" family: Book, Medium, Bold, Heavy, Black, ExtraBlack. Note that in this instancethree rules above, the user agent has decided'font-style', 'font-variant' and 'font-weight' are not explicitly mentioned, which means they are all three set to assign a numerictheir initial value ('normal'). The fourth rule sets the 'font-weight' to "Example2 ExtraBlack". Second example of font-weight mapping Available faces Assignments Filling'bold', the 'font-style' to 'italic' and implicitly sets 'font-variant' to 'normal'.

The fifth rule sets the 'font-variant' ('small-caps'), the holes "Ice Prawn Book" 400 100, 200, 300 "Ice Prawn Medium" 500   "Ice Prawn Bold" 700 600 "Ice Prawn Heavy" 800   "Ice Prawn Black" 900   "Ice Prawn ExtraBlack" (none)   15.5.2 Examples'font-size' (120% of the parent's font), the 'line-height' (120% times the font matching Example(s):size) and the 'font-family' ('fantasy'). It follows that the keyword 'normal' applies to the two remaining properties: 'font-style' and 'font-weight'.

The following example defines a specific font face, Alabama Italic. A panosevalues refer to system fonts:

caption
The font description and source URIused for retrieving a truetype servercaptioned controls (e.g., buttons, drop-downs, etc.).
icon
The font are also provided. Font-weight and font-style descriptors are providedused to describe the font.label icons.
menu
The declaration says thatfont used in menus (e.g., dropdown menus and menu lists).
message-box
The weight will also match any requestfont used in dialog boxes.
small-caption
The range 300 to 500.font used for labeling small controls.
status-bar
The font family is Alabama andused in window status bars.

System fonts may only be set as a whole; that is, the adornedfont name is Alabama Italic. @font-face { src: local("Alabama Italic"), url(http://www.fonts.org/A/alabama-italic) format("truetype"); panose-1: 2 4 5 2 5 4 5 9 3 3; font-family: Alabama, serif; font-weight: 300, 400, 500; font-style: italic, oblique; } Example(s):family, size, weight, style, etc. are all set at the next example definessame time. These values may then be altered individually if desired. If no font with the indicated characteristics exists on a family of fonts.given platform, the user agent should either intelligently substitute (e.g., a single URI is provided for retrievingsmaller version of the 'caption' font data. This data file will contain multiple styles and weights ofmight be used for the named'small-caption' font), or substitute a user agent default font. Once oneAs for regular fonts, if, for a system font, any of the individual properties are not part of these @font-face definitions has been dereferenced,the data willoperating system's available user preferences, those properties should be in the UA cache for other facesset to their initial values.

That use the same URI. @font-face { src: local("Helvetica Medium"), url(http://www.fonts.org/sans/Helvetica_family) format("truedoc"); font-family: "Helvetica"; font-style: normal } @font-face { src: local("Helvetica Oblique"), url("http://www.fonts.org/sans/Helvetica_family") format("truedoc"); font-family: "Helvetica"; font-style: oblique; slope: -18 } Example(s): The following example groups three physicalis why this property is "almost" a shorthand property: system fonts into one virtual fontcan only be specified with extended coverage. In each case,this property, not with 'font-family' itself, so 'font' allows authors to do more than the adorned font name issum of its subproperties. However, the individual properties such as 'font-weight' are still given invalues taken from the src descriptor to allow locally installed versions tosystem font, which can be preferentially used if available. A fourth rule points to a font with the same coverage, but contained in a single resource. @font-face { font-family: Excelsior; src: local("Excelsior Roman"), url("http://site/er") format("intellifont"); unicode-range: U+??; /* Latin-1 */ } @font-faceindependently varied.

Example(s):

button {  font-family: Excelsior; src: local("Excelsior EastA Roman"), url("http://site/ear") format("intellifont"); unicode-range: U+100-220; /* Latin Extended A and B */font: 300 italic 1.3em/1.7em "FB Armada", sans-serif }
 @font-facebutton p {  font-family: Excelsior; src: local("Excelsior Cyrillic Upright"), url("http://site/ecr") format("intellifont"); unicode-range: U+4??; /* Cyrillic */font: menu }
 @font-facebutton p em {  font-family: Excelsior; src: url("http://site/excels") format("truedoc"); unicode-range: U+??,U+100-220,U+4??;font-weight: bolder }

Example(s): This next example might be found in a UA's default style sheet. It implementsIf the CSS2 genericfont family, serif by mapping itused for dropdown menus on a particular system happened to be, for example, 9-point Charcoal, with a wide varietyweight of serif fonts600, then P elements that might exist on various platforms. No metrics arewere descendants of BUTTON would be displayed as if this rule were in effect:

button p { font: 600 9px Charcoal }

Because the 'font' shorthand property resets any property not explicitly given since these vary amonga value to its initial value, this has the possible alternatives. @font-facesame effect as this declaration:

button p {
   src: local("Palatino"), local("Times New Roman"), local("New York"), local("Utopia"), url("http://somewhere/free/font");font-family:  serif; font-weight: 100, 200, 300, 400, 500;Charcoal;
  font-style: normal;
  font-variant: normal;
  font-weight: 600;
  font-size:  all9px;
  line-height: normal;
}