Tim Berners-Lee, August 2005
$Revision: 1.19 $ of $Date: 2008/08/01 21:02:19 $
Status: An early draft of a semi-formal semantics of the N3 logical properties.

Up to Design Issues

An RDF language for the Semantic Web


n3

Notation 3 Logic

This article gives an operational semantics for Notation3 (N3) and some RDF properties for expressing logic. These properties, together with N3's extensions of RDF to include variables and nested graphs, allow N3 to be used to express rules in a web environment.  

This is an informal semantics in that should be understandable by a human being but is not a machine readable formal semantics. This document is aimed at a logician wanting to a reference by which to compare N3 Logic with other languages, and at the engineer coding an implementation of N3 Logic and who wants to check the detailed semantics.

These properties are not part of the N3 language, but are properties which allow N3 to be used to express rules, and rules which talk about the provence of information, contents of documnts on the web, and so on.  Just as OWL is expressed in RDF by defining properties, so rules, queries, differences, and so on can be expressed in RDF with the N3 extension to formulae.

The log: namespace has functions, which have built-in meaning for cwm and other software.

See also:

The prefix log:  is used below as shorhand for the namespace <http://www.w3.org/2000/10/log#>. See the schema for a summary.


Motivation


The motivation of the logic was to be useful as a tool in in open web environment.   The Web contains many sources of information, with different characteristics and relationships to any given reader.  Whereas a closed system may be built based on a single knowledge base of belived facts, an open web-based system exists in an unbounded sea of interconnected information resources. This requires that an agent be aware of the provenance of information, and responsible for its disposition.  The language for use in this environemnt typically requires the ability to express what document or message said what, so the ability to quote subgraphs and match them against variable graphs is essential.  This quotation and reference, with its inevitable possibility of direct or indirect self-reference, if added directly to first order logic presents problems such as paradox traps. To avoid this, N3 logic has deliberately been kept to limited expressive power: it currently contains no general first order negation.  Negated forms of many of the built-in functions are available, however.

A goal is that information, such as but not limited to rules, which requires greater expresive power than the RDF graph, should be sharable in the same way as RDF can be shared.  This means that one person should be able to express knowledge in N3 for a certian purpose, and later independently someone else resue that knowledge for a different unforseen purpose.  As the context of the later use is unknown, this prevents us from making implicit closed assumptions about the total set of knowledge in the system as a whole.

Further, we require that other users of N3 in the web can express new knowledge without affecting systems we have already built.  This means that N3 must be fundamentally monotonic: the addition of new information from elsewhere, while it might cause an inconsistency by contradicting the old information (which would have to be resolved before the combined system is used), the new information cannot silently change the meaning of the original knowledge.

The non-monotonicity of many existing systems follows from a form of negation as failure in which a sentence is deemed false if it not held within (or, derivable from)  thecurrent knowledge base.  It is this concept of current knowledge base, which is a variable quantity, and teh ability to indirectly make reference to it which causes the non-monotonicity.  In N3Logic, while a current knowledge base is a fine concept, there is no ability to make reference to it implicitly in the negative.   The negation provided is the ability only for a specific given document (or, essentially, some abstract formula) to objectively detremine whether or not it holds, or allows one to derive, a given fact.  This has been called Scoped Negation As Failure (SNAF).

Formal syntax


The syntax of N3 is defined by the context-free grammar  This is available in machine-readable form in  Notation3 and  RDF/XML.

The top-level production for an N3 document is <http://www.w3.org/2000/10/swap/grammar/n3#document>.

In the semantics below we will consider these productions using notation as follows.

Production N3 syntax examples notation below for instances
symbol <foo#bar>    <http://example.com/> c d e f
variable Any symbol quantified by @forAll or @forSome in the same or an outer formula. x y z
formula {  ...  }  or an entire document F  G H K
set of universal variables of F @forAll :x, :y. uvF
set of existential variables of F @forSome :z, :w. evF
set of statements of F stF
statement   <#myCar>   <#color>   "green". Fi   or  {s p o}
string "hello world" s
integer 34 i
list ( 1 2 ?x  <a> ) L M
Element i of list L Li
length of list |L|
expression see grammar n m
Set* {$  1, 2, <a> $} S T

*The set syntax and semantics are not part of the current Notation3 language but are under consideraton.

Semantics


Note.  The Semantics of a generic RDF statement are not defined here.  The extensibility of RDF is deliberately such that a document may draw on predicates from many sources.  The statement {n c m} expresses that the relationship denoted by c holds between the things denoted by n and m.  The meaning of the  statement {n c m} in general is defined by any specification for c. The Architecture of the WWW specifies informally how the  curious can discover information about the relation. It discusses how the architecture and management of the WWW is such that a given social entity has juristdiction over certain symbols (though for example domain name ownership). This philosophy and architecture is not discussed further here.  Here though we do define the semantics of certain specific predicates which allow the expression of the language.  In analysing the language the reader is invited to consider statements of unknown meaning ground facts.  N3Logic defines the semantics of certain properties. Clearly a system which recognizes further logical predicates, beyond those defined here, whose meaning introduces greater logical expressiveness would change the properties of the logic.

Simplifications

N3 has a number of types of shortcut syntax and syntactic sugar.  For simplicity, in this article we consider a language simpler the full N3 syntax referenced above though just as expressive, in that we ignore most syntactic sugar. The following simplifications are made.

We ignore syntactic sugar of comma and semicolon as shorthand notations.   That is, we consider a simpler language in which any such syntax has been expanded out. Loosely:

A sentence of the form becomes two sentences
subject   stuff ; morestuff . subject stuff .  subject morestuff .
subject predicate stuff ,  object . subject predicate stuff  subject predicate object .


For those familiar withh N3, the other simplifications in th elanguage considered here are as follows.

Notation3 has explictly quantified existential variables as well as blank nodes.  The description below does not mention blank nodes, although they are very close in semantics to existentially quantified variables.   We consider for now a simpler langauge in which blank nodes have ben replaced by explicitly named variables  existentially quantified in the same formula.

We have only included strings and integers, rather than the whole set of RDF types an user-defined types.

These simplifications will not deter us from using N3 shorthand in examples where it makes them more readable, so the reader is assumed familar with them.

Defining N3 Entailment

The RDF specification defines a very weak form of entailment, known as RDF entailment or simple entailment.  He we define the equivelent very simple N3-entailment. This does not provide us with useful powers of inference: it is alsmot textual includsion, but just  has conjunction elimination (statement removal) , universal elimination, existential introduction and variable renaming. Most of this is quite traditional.  The only thing to distinguish N3 Logic from typical logics is the Formula, which allows N3 sentences to make statements about N3 sentences.   The following details are included for compleness and may be skipped.

Substitution

Substitution is defined to recurively apply inside compound terms, as is usual.  Note only that substitution does descend into compund terms, while substitution of owl:sameAs, discussed later, does not.

We define a substitution operator   σx/m  which replaces occurrences of the variable x. with the expression m.  For compound terms, substitution of a compiound term (list, formula or set) is performed by performing substitution of each component, recursively.

Abbreviating  the substitution  σx/m as  σ , we define substitution operator as usual:

σx = m       (x is replaced by m)
σy = y        (y not equal to x)
σa = a        (symbols and literals are unchanged)
σi = i
σs = s         
σ( a b ... c )  =  ( σa σb ... σc )                       (substitution goes into compound terms)
σ{$ a, b, ... c  $}   =  {$ σa, σb, ... σc  $}
uv σF  = σ uvF
ev σF  = σ evF
st  σF = σ stF

In general a substitution operator is the sequential application of single substitutions:

σ = σx1/m1σx2/m2σx2/m2 ... σxn/mn

Value equality 


Value equality between terms is defined in an oridinary way, compatible with RDF.

For concepts which exist in RDF, we  use RDF equality. This is RDF node equality.  These atomic concepts have a simple form of equality.

For lists, equality is defined as a pairwise matching.

For sets, equality is defined as a mapping between equal terms existing in each direction.

For formulae, equality F = G is defined as a  substitution σ existing mapping variables to variables.  (Note that as here RDF Blank Nodes are considered as existential variables, the substitution will map b-nodes to b-nodes.)

The table below is a summary for completeness.

Production Equality
symbol uri is equal unicode string
variable variable name is equal unicode string
formula  F = G iff   |stF| = |stG| and there is some substitution  σ such that (∀i . ∃j .  σFi = σGj. )
statement  Subjects are equal, predicates are equal, and objects are equal
string  equal unicode string
integer  equal integer
list L = M  |L|  =  |M|        &    (∀i . Li = Mi  )
set   S = T  (∀i . ∃j .  Si = Tj. )   &  (∀i . ∃j .  Si = Tj. )
formula F = G ∃σσ F = σ G
unicode string Unicode strings should be in canonical form. They are equal if the corresponding characters have numerically equal code points.

Conjunction

N3, like RDF, has an implied conjunction, with its normal properties, between the statements of a formula. 

The semantics of a formula which has no quantifiers (@forAll or @forSome) are the conjunction of the semantics of the statments of which it is composed.

We define the conjunction elimination operator ce(i) of removing the statement Fi from formula F.  By the conventional semantics of conjunction, the ce(i) operator is truth-preserving.  If you take a formula and remove a statement from it it is still true.

CE:   From     F  follows    ce(i)  F

Existential quantification

Existential quantifiers and Universal qnatifiers have the usual qualities
Any formula, including the root formula which matches the "document" production of the grammar,  may have a set of existential variables indicated by an @forSome declaration.   This indicates that, where the formula is considered true, it is true for at least one substitution mapping the existantial variables onto non-variables.

As usual, we define a truth-preserving  Existential Introduction operator on formulae, that of introducing an existentially quantified variable in place of any term. The operation  ei(x, n) is defined as
  1. Creation of a new variable x which occurs nowhere else
  2. The application of σx/n to F
  3. The addition ofx  to evF.

EI:    From  F   follows  ei(x,n)  F    for any x not occuring anywhere else

Universal quantification


Any formula,  (including the root formula), may have a set of universal variables.  These are indicated by  @forall  declarations.  The scope of the @forAll is outside the scope of any @forSome.

If both universal and existential quantification are specified for the same context, then the scope of the universal quantification is outside the scope of the existentials:

{ @forAll <#h>. @forSome <#g>. <#g> <#loves> <#h> }.

means

∀<#h>  ( ∃<#g>  ((  <#g> <#loves> <#h> ))


The semantics of @forAll is that  for any substitution σ = subst(x, n) where  x member of  uvF,  if  F is true then σF is also true.  Any @forAll declaration may also be removed, preserving truth.  Combining these, we define a truth-preserving operation  ue(x, n)  such that  ue(x, n) F is formed by
  1. Removal of  x from  evF
  2. Application of subst(x, n)
We have the axiom of universal elimination

UE:  From     F       follows   ue(x, n)   F    for all x in evF
As the actual variable used in a formula is quite irrelevant to its semantics, the operation of replacing that variable with another one not used elsewhere within the formula is truth-preserving.

Variable renaming


 We define the operation of variable renaming vr(x,y) on F when x is a member of uvF or is a member of evF.

VR:  From   F   follows    vr(x, y) F    where  x is in uvF or evF and y does not occur in F

Occurrence in F is defined recursively in the same way as susbtitution:  x occurs in F iff σx/nF is not equal to F for arbitrary n.

Union of formulae

The union H = F∪G of two formulae F and G is formed, as usual,  as follows.

A variable renaming operator is applied to G such that the resulting formula G' has no variables which are occur unquantified or differently quantified or existentially quantified in F, and vice-versa.  (F and G' may share univeral variables).

F∪G is then defined by:

st(F∪G) = stF ∪ st G'  ;    ev(F∪G)  =  evF ∪ evG' ;     uv(F∪G) = uvF ∪ uv G'


N3 entailment

The operators conjunction elimination, existential elimination, univsal introduction and variable renaming  are truth preserving.  We define an N3 entailment operator (τ) as any operator which is the successive application of  any sequence (possibly empty) of such operators.  We say a formula F n3-entails a formula  τ F.  By a combination of  SE, EI, UE and VR,   τ F logically follows from F.

 Note.  RDF Graph is a subclass of N3 formula.  If F and G are RDF graphs, only CI and EI apply and n3-entailment reduces to simple entailment from RDF Semantics. (@@check for any RDF weirdnesses)

We have now defined this simple form of N3-entailment, which amounts to little more than textual inclusion in one expression of a subset of another.  We have not defined the normal collection of implication, disjunction and negation which first order logic, as N3logic does provide for first order negation.  We have, in the process,  defined a substition operation which we can now use to define implication, which allows us to express rules.  

Logic properties and built-in functions

We now define the semantics of N3 statements whose predicate is one of a small set of logic properties.  These are statements whose truth can be established by performing calculations, or by accessing the web.  

One of our objectives was to make it possible to make statements about, and to query, other statements such as the contents of data in information resources on the web.  We have, in formulae, the ability to represent such sets  of statements.  Now, to allow statements about them, we take some of the relationships we have defined and give them URIs so that these statements and queries can be written in N3.

While the properties we introduced can be used simply as ground facts in a database,  is very useful to take advantage of the fact that in fact they can be calculated.  In some cases, the truth or falsehood of a binary relation can be calculated; in others, the relationship is a function so one argument (subject or object of the statement) can be calculated from the other.

We now show how such properties are defined, and give examples of how an inference system can use them.  A motivation here is to do for logical information what RDF did for data: to provide a common data model and a common syntax, so that extensions of the language  are made simply by defining new terms in an ontology.  Declarative programing languages like scheme[@@] of course do this.  However, they differ in their choice of pairs rather than the RDF binary relational model for data, and lack the use of univsal identifiers as symbols.  The goal with N3 was to make a minimal  extension to the RDF data model, so that the same language could be used for logic and data, which in practice are mixed as a colloidal solution in many real applications.

Calculated entailment


We introduce also a set of properties whose truth may be evaluated directly by machine.   We call these "built-in" functions.  The implemnation as built-in functions is  not in general required for any implementaion of the N3 language, as they can always soundly be treated as ground facts.  However, their usefulness derives from their implementation. We say that for example  { 1 math:negation  -1 } is entailed by calculation.    Like other RDF properties, the set is designed to be extensible, as others can use URIs for new functions. A much larger set of such properties is described for example in the CWM bultt-ins list, and the semantics of those are not described here.

When the truth of a statement can be deduced because its predicate is a built-in function, then we call the derivation  of the statement from no other evidence calculated entailment.

We now define a small set of such properties which provide the power of N3 logic for inference on the web.

log:includes

If a formula  G n3-entails another formula F,  this is expressed in N3 logic as

 F log:includes G.

Note.  In deference to the fact that RDF treats lists not as terms but as things constructed from first and rest pairs, we can view formulae which include lists as including rdf:first and rdf:rest statements.  The effect on inclusion is that two other entailment operations are added: the addition of any statement of the form  L rdf:first nwhere n is the first element of L, or L rdf:rest K where K is list forming the remaining non-first elements of L.   This is not essential to a further understanding of the logic, nor to the operation of a system which does not contain any explicit mention of the terms rdf:first or rdf:rest.

For the discussion of n3-entailment, clearly:

From    F   and   F log:includes G   logically follows   G

This can be calculated, because it is a mathematical operation on two compound terms.  It is typically used in a query to test the contents of a formula.  Below we will show how it can be used in the antecedent of a rule.

log:notIncludes


We write of formulae F and G:  F log:notIncludes G if it is not the case that G n3-entails F.

As a form of negation, log:notincludes is completely monotonic.  It can be evaluated by a mathematical calculation on the value of the two terms: no other knowledge gained can influence the result.  This is the scoped negation as failure mentioned in the introduction.  This is not a non-monotonic negation as failure.

Note on computation: To acertain whether G n3-entails F in the worst case involves checking for all possible n3-entailment transformations which are combinations of the variables which occur in G. This operation may be tedious: it is strictly graph isomorphism complete. However  the use of symbols rather than variables for a good proportiion of nodes makes it much more tractable for practical graphs.   The ethos that it is a good idea to give name things with URIs (symbols in N3) is a basic meme of web architecture [AWWW].  It has direct practical application in the calculation of n3-entailment, as comparison of graphs whose nodes are labelled is much faster (of order n log (n))) 

log:implies

The log:implies property relates two formulae, expressing implication.   The shorthand notation for log:implies is   => .  A statemnt using log:implies, unlike log:includes, cannot be calculated.  It is not a built-in function, but the predicate which allows the expression of a rule.

The semantics of implication are standard, but we eleborate them now for completeness.

F log:implies G is true if and only if when the formula F is true then also G is true.

MP:   From    F  and      F => G     follows     G

A statement in formula H is of the form F=>G can be considered as rule, in which case, the subject F is the premise (antecedent) of the rule, and the object G is the consequent.

Implication is normally used within a formula with universally quantified variables.

For example, universal quantifiers are  used with a rule in H as follows.  Here H is the formula containng the rules, and K the formula upon which the rules are applied, which we can call the knowledgebase.

If F => G is in H, and then for every σ which is a transformation composed of universal eliminations of variables universally quantified in H,  then  it also follows that σF => σG. Therefore, for every σ such that  K includes σF,  σG follows from K.

In the particular case that H and K are both the knowledge base, or formula belived true at the top level, then

GMP:    From      F  => G  and  σF   follows    σG       if σ is a transformation composed of universal eliminations of variables universally quantified at the top level.

Filtering

When a knowledge base (formula) contains a lot of information, one way to filter offf a subset is to run a set of rules on the knowledge base, and take only the new data which is generated by the rules.   This is the filter operation.

When you apply rules to a knowledge base, the filter result of rules in H applied to K is the union of all σG for every statement F => G which is in H,  for every σ which s a transformation composed of universal eliminations of variables universally quantified in H such that K includes σF.

Repeated application of rules

When rules are added back repeatedly into the same knowledge base,  in order to prevent the unnecessary extra growth of the knowledge base, before adding σG to it,  there is a check to see whether the H already includes σG, and if it does, the adding of σG is skipped.

Let the result of rules in H applied to K,  ρHK,  be the union of K with all σG for every statement F => G which is in H,  for every σ which is a transformation composed of universal eliminations of variables universally quantified in H, such that K includes σF, and K does not n3-entail σG.


Note. This form of rule allows existentials in the consequent: it is not datalog.  It is is clearly possible in a forward-chgaining reasoner to generate an unbounded set of conclusions with rules of the form (using shorthand)

  {  ?x a :Person }  => { ?x  :mother [ a :Person] }.

While this is a trap for the unwary user of a forward-chaining reasoner, it was found to be essential in general to be able to genearte arbitrary RDF containing blank nodes, for example when translating information from one ontology into another.

Consider the  repeated application of rules in H to K,  ρiHK.  If there are no existentially quantified variables in the consequents of any of the rules in H, then this is like datalog, and there will be some threshold n above which no more data is added, and there is a closure: ρiHK = ρnHK  for all i>n.   In fact in many practical applications even with the datalog constraint removed, there is also a closure.  This ρHK is the result of running a forward-chaining reasoner on H and K.

Rule Inference on the knowledge base

In the case in which rules are in the same formula as the data, the single rule operation can be written  ρKK, and the closure under rule application ρKK

Cwm note:   the --rules command line option calculates  ρKK, and the --think calculates ρKK.  The --filter=H calculates the filter result of H on the knowledge base.

Examples

Here a simple rule uses log:implies.

@prefix log: <http://www.w3.org/2000/10/swap/log#>.
@keywords.
@forAll x, y, z. {x parent y. y sister z} log:implies {x aunt z}

This N3 formula has three univsally quantifiied variables and one statement.  The subject of the statement, 

{x parent y. y sister z}

is the antecedent of the rule and the object,  

{x aunt z}

is the conclusion. Given data

Joe parent Alan.
Alan sister Susie.

a rule engine would conclude

Joe aunt Susie.

As a second example, we use a rule which looks inside a formula:

@forAll x, y, z.
{ x wrote y.
y log:includes {z weather w}.
x home z
} log:implies {
Boston weather y
}

Here the rule fires when x is bound to a symbol denoting some person who is the author of a formula y, when the formula makes a statement about the weather in (presumbably some place) z, and x's home is z.  That is, we belive statements about the weather at a place only from people who live there.  Given the data

Bob lives  Boston.
Bob wrote { Boston weather sunny }.
Alice lives Adelaide.
Alice wrote { Boston weather cold }

a valid inference would be

Boston weather sunny.

log:supports


We say that F log:supports G if there is some sequence of  rule inference and/or calculated entailment and/or n3 entailment operators which when applied to F produce G.

log:conclusion



The log:conclusion property expresses the relationship between a formula and its deductive closure under operations of n3-entailment, rule entailment and calculated entailment.  

As noticed above, there are circumstances when this will not be finite.

log:conclusion is the transitive closure of log:supports.

log:supports can be written in terms of log:conclusion and log:includes.

{ ?x log:supports ?y }   if and only iff   { ?x log:conclusion [ log:includes ?y ]}

However, log:supports may be evaluated in many cases without evaluating log:conclusion: one can determine whether y can be derived from x in many ways, such as backward chaining, without necessarily having to evaluate the (possibly infinte) deductive closure.

Now we have a system which ahs the capacity to do inference using rules, and to operate on formulae.  However, it operates in a vacuum.  In fact, our goal is that the system should operate in the context of the web.

Involving the Web

We therefore expose the web as a mapping between URIs and the information returned whn such a URI is dereferenced, using appropriate protocols.  In N3,  the information resource is identified by a symbol, which is in fact is its URI. In N3, infromation is represented in formulae, so we represent the information retrieved as a formula.
Not all information on the web is, of course in N3. However the architecture we design is that N3 should here be the interlingua. Therefore, from the point of view of this system, the semantics of a document is exactly what can be expressed in N3, no more and no less.

log:semantics**

c log:semantics F  is true iff c is a document whose logical semantics expressed in N3 is the formula F.

The relation between a document and the logical expression which represents its meaning expressed as N3.   The Architectrue of the World Wide Web [AWWW] defines algorithms by which a machine can determine representations of document  given its symbol (URI).   For a representation in N3, this is the formula which corresponds to the document production of the grammar.   For  a representation in RDF/XML it is the formula which is the entire graph parsed.  For any other langauges, it may be calculated in as much  a specification exists which defines the equivalent N3 semantics for files in that language.

On the meaning of N3 formula

This is not of course the  semantics of the document in any absolute sense.  It is the semantics expressed in N3.  In turn, the full semantics of an N3 formula are grounded,  in the definitons of the properties and classes used by the formula.  In the HTTP space in which URIs are minted by an authority, definitive information about those definitions may be found by dereferencing the URIs. This information may be in natural language, in some macine-processable logic, or a mixture.   Two patterns are important for the semantic web. 

One is the grounding of properties and classes by defining them in natural language.  Natural language, of course, is not cabable of giving an absolute meaning to anything in theory, but in practice a well wrirtten document carefully written by a group of people achieves a precision of definition which is quite sufficient for the community to be able to exchange data using the terms concerned.  The other pattern is the raft-like defintion of terms in terms of related neighbouring ontologies.

  @@@@ A full discussion of the grounding of meaning in a web of such definitions is beyond the scope fo this article.  Here we define only the operation semantics of a system using N3.

@@@@  Edited up to here

The log:semantics of an N3 document is the formula acheived by parsing representation of the document.
(Cwm note: Cwm knows how to go get a document and parse N3 and RDF/XML
it in order to evaluate this. )

Other languages for web documents  may be defined whose N3 semantics are therefore also calculable, and so they could be added in due course.
See for example [GRDDL], [RDF/A], etc

However, for the purpose of the analysis of the language, it is a convenient to  consider the semantic web simply as a binary 1:1 relation between a subset of symbols and formulae.

For a document in Notation3, log:semantics is the
log:parsedAsN3 of the log:contents of the document.

log:says

log:says is defined by:

F  log:says  G   iff  ∃  H  .   F log:semantics  H   and   H log:includes G   

In other words, loosely a document says something if a representation of it in the sense of the Architecture of the World Wide Web [AWWW] N3-entails it.

The semantics of log:says are similar to that of says in [PCA].

Miscellaneous

log:Truth

This is a class of true formulae. 

From   { F rdf:type log:Truth }    follows  F   

The cwm engine will proces rules in the (indirectly command-line specified) formula or any formula which that declares to be a Truth. 

The dereifier will output any described formulae whcih are described as being in the class Truth. 

This class is not at all central to the logic.

Working with OWL

@@ Summary

Conclusion

The semantics of N3 have been defined, as have some built-in opertor properties which add logical inference using rules to the langauge, and allow rules to define inference which can be drawn from specific web documents on the web, as a function of ofther informatiuon about those documents.

The language has been found to have some useful practical properties.  The separation betwen the Nottaion3 extensions to RDF and the logic properties has allowed N3 by itself to be used in many other applications directly, and to be used with other properties to provide other functionality such as the expression of patches (updates) [Diff].

The use of log:notIncludes to allow default reasoning without non-monotonic behavior achieves a desgn goal for disributed rule systems.



**[Footnote: Philosophers may be distracted here into worrying about the meaning of meaning. At least we didn't call this function "meaning"! In as much as N3 is used as an interlingua for interoperability for different systems, this for an N3 based system is the meaning expressed by a document.  One reviwer was aghast at the definition of semantics as being that of retreival of a representation, its parsing and assimilation in terms of the local common logical framework. I suspect however that the meaning of the paper to the reviewer could be considered quite equivalently the  result of the process of retreival of a representation of the paper, its parsing by the review, and its assimilation in terms of the reviewer's local logical framework: a similar though perhaps imperfect process.
Of course, the semantics of many documents are not expressable in logica at all, and many in logic but not in N3. However, we are building a system for which a prime goal is the reading and investigation of machine-readable documents on the web. We use the URI log:semantics for this function and apologize for any heartache it may cause.]


 F = G iff   |stF| = |stG| and there is some substitution  σ such that (∀i . ∃j .  σFi = σGj. )

Appendix: Colophon

formatting XHTML 1 with nvu

Appendix: Drafting Notes

yes, discuss notational abbrevaition, but not abstract syntax

hmm... are log:includes, log:implies and such predicates? relations? operators? properties?

To do: describe the syntactic sugar transformations formally to close the loop.